FlatRoofing

Flat RoofingBrochure

2

Market Sectors

Our flat roofing products have been used in a wide cross section of sectors for a range of building types.

The sectors below give an indication of the variety of uses for our products.

Private Housing Care Home, Stoke-on-Trent, UK

IndustrialMorrisons Distribution Centre, Bridgwater, Somerset, UK

RetailPorsche Show Room, Chester, UK

InfrastructureAerospace, Goodrich, UK

Retail Morrisons Supermarket, Salford, UK

3

Market Sectors

Education Ysgol Bro Alun School, Wrexham, UK

Offices The Crofts Office, Rotherham, UK

Health One Centre, Hartlepool, UK

Retail Tesco Supermarket, Batley, UK

* Please be aware that our trailers limit lengths to 11.8m.

4

Kingspan Topdek KS1000 TD

Standing Seam Effect & Membrane Roof

Sanvey Gate Apartments, Leicester, UK (with a standing seam aesthetic)

Kingspan Topdek is a single component, factory pre-engineered roof deck, comprising a high performance single-ply PVC / TPE membrane with insulation and a trapezoidal steel deck, that can eliminate the need for valley-hip and boundary wall gutters. It is suitable for flat and pitched roofs above 1:80 (0.72º) after deflection, as well as curved roof applications with a convex curve (45m radius) and concave curve (50m radius).

Product Features

Profile: Flat single-ply PVC / TPE membrane, with optional standing seam aesthetic

Fixing detail: Secret-fix appearance

Metal type: N/A

Application: Flat and pitched roofs above 1:80 (0.72º) after deflection, and curved roof with a convex curve (45m radius) and concave curve (50m radius)

Lengths: From 1.5m to 16m*

Cover width: 1000mm

Environmental rating:

May be Green Guide A+ rated, subject to project specific assessment

Fire rating: LPCB, FM approved

Product compatibility:

Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as dome, pyramid and atrium

Type of membrane:

PVC (Polyvinyl Chloride) / TPE (Thermoplastic Elastomer) in 4 RAL colours

5

Kingspan Topdek KS1000 TD

Standing Seam Effect & Membrane Roof

Captains Club Hotel, Bournemouth, UK

KS1000 TD

Product Specifications and Accreditations

Product Reference

Standard Environment

Temp. Control

HygieneHigh

HumidityLow

Temp.

Fire Rating

LPCB FM

KS1000 TD P P P l l P P

Dimensions, Weight and Thermal Performance

Core Thickness (mm) 34 71 91 100 120

Overall Thickness (mm) 72 109 129 138 158

U-value (W/m2K) 0.48 0.25 0.20 0.18 0.15

Weight (kg/m2) 0.5mm Deck 9.0 10.5 11.3 11.7 12.5

The U-values have been calculated using the method required by the appropriate National Building Regulations.

Topdek100mm thickness

38mm

1000mm Cover Width60mm

200mm

Core Thickness

6

Profile: Flat roof deck

Fixing detail: Secret-fix appearance externally and visible fixings internally

Metal type: Steel

Application:

Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex curve** (30m radius) and concave curve** (15m radius)

Spans: Double spans of up to 6m can be achieved depending on load and roof type

Lengths: From 1.8m to 16m†

Cover width: 1000mm

Environmental rating:

May be Green Guide A+ rated, subject to project specific assessment

Product compatibility:

Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria

* Governed by the minimum pitch of the waterproofing layer used.** Tested on 46mm BENCHMARK Envirodek only, other radii are treated on a case by case basis. Please contact Kingspan Technical Services for assistance. The convex and concave curves are measured across the width (facet) of the panel, not along the length. † Please be aware that our trailers limit lengths to 11.8m.

BENCHMARK Envirodek is an insulated roof deck that has been specifically designed to support green and brown roof systems, for both intensive and extensive solutions. It can double span up to 6m and is compatible with a wide range of waterproofing and green roof systems.

BENCHMARK By Kingspan is a member of the Green Roof Organisation (GRO).

BENCHMARK ENVIRODEK ROOF SYSTEM / GREEN ROOF

River House, London, UK (Image courtesy of IKO plc)

PRODUCT FEATURES

7

PRODUCT SPECIFICATIONS AND ACCREDITATIONSProduct Reference

Standard Environment

Temp. Control

HygieneHigh

HumidityLow Temp.

Fire Rating

LPCB FM

BENCHMARK Envirodek P P P P l l l

DIMENSIONS, WEIGHT AND THERMAL PERFORMANCECore Thickness (mm) 66 102 126

Overall Thickness (mm) 174 210 234

U-value (W/m2K) 0.25 0.18 0.15

Weight (kg/m2) 0.9mm Deck 20.4 21.8 22.8

The U-values have been calculated using the method required by the appropriate National Building Regulations.

BENCHMARK ENVIRODEK ROOF SYSTEM / GREEN ROOF

Bideford College, Devon, UK

BENCHMARK ENVIRODEK

Envirodek102mm thickness

160mm

1000mm Cover Width

108mm

Core Thickness

8

BENCHMARK TOPSPAN ROOF SYSTEM / STANDING SEAM & MEMBRANE

Wellingborough Pool, Northamptonshire, UK (Image courtesy of IPS Rubberfuse)

BENCHMARK Topspan is an insulated roof deck combining a structural deck and metal top sheet in one product. The panels are suitable for zinc, stainless steel and aluminium standing seam waterproofing systems, and single-ply membranes.

BENCHMARK Topspan provides a clear span capability of up to 8m and is faster to install than alternative built-up roof deck sytems.

Profile: Flat roof deck

Fixing detail: Secret-fix appearance externally and visible fixings internally

Metal type: Steel

Application:

Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex curve** (30m radius) and concave curve** (15m radius)

Spans: Suitable for frame-to-frame spanning of up to 8m, depending on applied loads

Lengths: From 1.8m to 16m†

Cover width: 1000mm

Environmental rating:

May be Green Guide A+ rated, subject to project specific assessment

Fire rating: LPCB approved (66mm core only)

Product compatibility:

Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria

* Governed by the minimum pitch of the waterproofing layer used.** Tested on 46mm BENCHMARK Topspan only, other radii are treated on a case by case basis. Please contact Kingspan Technical Services for assistance. The convex and concave curves are measured across the width (facet) of the panel, not along the length. † Please be aware that our trailers limit lengths to 11.8m.

PRODUCT FEATURES

9

BENCHMARK TOPSPAN ROOF SYSTEM / STANDING SEAM & MEMBRANE

PRODUCT SPECIFICATIONS AND ACCREDITATIONSProduct Reference

Standard Environment

Temp. Control

HygieneHigh

HumidityLow Temp.

Fire Rating

LPCB FM

BENCHMARK Topspan P P P P l P l

DIMENSIONS, WEIGHT AND THERMAL PERFORMANCECore Thickness (mm) 66 102 126

Overall Thickness (mm) 174 210 234

U-value (W/m2K) 0.25 0.18 0.15

Weight (kg/m2) 0.9mm Deck 20.4 21.8 22.8

The U-values have been calculated using the method required by the appropriate National Building Regulations.

BENCHMARK TOPSPAN

One Centre, Hartlepool, UK

Envirodek102mm thickness

160mm

1000mm Cover Width

108mm

Core Thickness

10

BENCHMARK ROOFLINER ROOF SYSTEM / STANDING SEAM & MEMBRANE

St. John’s Community Hospital, Enniscorthy, Ireland

BENCHMARK Roofliner is an insulated roof panel that is ideal for standing seam finishes. The panels are specifically designed for zinc, stainless steel and aluminium standing seam waterproofing systems, and single-ply membranes.

BENCHMARK Roofliner is available in a large range of thicknesses, achieving a U-value as low as 0.09W/m²K and has an attractive flat internal liner profile for aesthetics.

PRODUCT FEATURES

PRODUCT FEATURES Profile: Flat insulated roof panel

Fixing detail: Secret-fix appearance externally and visible fixings internally

Metal type: Steel

Application:

Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex and concave curve** of ≥20m (600mm cover width) and ≥25m (1100mm cover width)

Lengths: From 1.8m to 16.5m†

Cover width: 600mm and 1100mm

Environmental rating:

May be Green Guide A+ rated, subject to project specific assessment

Product compatibility:

Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria

* Governed by the minimum pitch of the waterproofing layer used.** Across the width (facet) of the panel, not along the length. † Please be aware that our trailers limit lengths to 11.8m

11

BENCHMARK ROOFLINER ROOF SYSTEM / STANDING SEAM & MEMBRANE

BENCHMARK ROOFLINER

Motorway Service Station, Lusk, Ireland

PRODUCT SPECIFICATIONS AND ACCREDITATIONSProduct Reference

Standard Environment

Temp. Control

HygieneHigh

HumidityLow Temp.

Fire Rating

LPCB FM

BENCHMARK Roofliner P P P P l l l

DIMENSIONS, WEIGHT AND THERMAL PERFORMANCECore Thickness (mm) 80 100 125 150 175 200 220

U-value (W/m2K) 0.25 0.20 0.16 0.14 0.12 0.10 0.09

Weight (kg/m2) 13.6 14.4 15.4 16.4 17.4 18.4 19.1

The U-values have been calculated using the method required by the appropriate National Building Regulations.

Roo�iner125mm thickness

600mm & 1100mm Cover Widths

Core Thickness

03/2015

Kingspan Limited Greenfield Business Park No. 2, Greenfield, Holywell, Flintshire, CH8 7GJ, UK t: +44 (0) 1352 716100 f: +44 (0) 1352 710161 www.kingspanpanels.co.uk

Carrickmacross Road, Kingscourt, Co Cavan, Ireland t: +353 (0) 42 969 8500 f: +353 (0) 42 969 8572 www.kingspanpanels.ie

For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com

Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof.