FLAMEGUARD SYSTEM

Flameguard Lighting

c2 call: 01827 63454 fax: 01827 63362 email: [email protected] visit: www.scolmore.com

Construction Overview c4Connection Features c5

LOW ENERGY LED DOWNLIGHTERS

Fixed LED Downlighter c6

Professional Cast Fixed LED Downlighter c8

Professional Cast Adjustable LED Downlighter c10

Professional Cast Eyeball LED Downlighter c12

Professional Cast Recessed LED Downlighter c14

LOW ENERGY LED IP RATED DOWNLIGHTERS

IP65 Downlighter c16

LOW ENERGY LED GX53 DOWNLIGHTERS

Fixed & Adjustable Low Energy Downlighter c18

LOW ENERGY MODULAR DOWNLIGHTERS

Low Energy Downlighter c20

HALOGEN DOWNLIGHTERS

Fixed Downlighter c42

Adjustable Downlighter c46

Eyeball Downlighter c50

Professional Cast Fixed Downlighter c52

Professional Cast Adjustable Downlighter c56

Professional Cast Eyeball Downlighter c60

Professional Cast Square Wallwash c61

Professional Cast Recessed Downlighter c62

Professional Cast Wallwash c66

contents

c3call: 01827 63454 fax: 01827 63362 email: [email protected] visit: www.scolmore.com

HALOGEN IP RATED DOWNLIGHTERS

IP65 Downlighter c68

LOW ENERGY CFLi GX53 DOWNLIGHTERS

Fixed & Adjustable Low Energy Downlighter c72

CAVITY WALL BOXES

Fire and Acoustic Rated Cavity Wall Boxes c76

SOLUTIONS AND TECHNICAL Insulation Support Boxes c74 IP Zones c78 3D House c79 Technical Specifications c80 Approvals and Standards c81 Installation Dimensions & Airflow Characteristics c82

The FlameGuard System has already been

incorporated into a selection of our ranges of low

voltage and mains downlighters. All of the different

downlighter types are more fully described in the

following pages but you may be assured that there

is a FlameGuard protected, fire and acoustic rated

downlighter to fit virtually every installation

requirement. Other related products include

optional Moisture Seals to prevent the ingress of

moisture laden air into ceiling voids or attic spaces

etc.. and a specially developed Insulation Support

Box which facilitates the laying of an unbroken layer

of insulation material directly over any FlameGuard

downlighter installation.

c4

Available Finishes (*)

call: 01827 63454 fax: 01827 63362 email: [email protected] visit: www.scolmore.com

Construction

Ceramic Lampholder A number of lamp holders are available in the Flameguard range, all of which are manufactured from ceramic material with double insulated supply cables.

Flameguard Seal Located inside the top of the downlight and around the outside of the body, the Flameguard seals are manufactured from an intumescent material that expands in the event of fire. As the material expands it fills the ventilation holes in the top of the downlight and also seals the ceiling cut-out.

Spring Fixing Arms Heavy duty springs are provided to support the downlight in the ceiling. Whilst being strong enough to retain the downlight, they can easily be pulled back to allow the downlight to pass through the ceiling cut-out during installation.

Moisture Seal Fitted to many Flameguard downlights as standard, the moisture seal prevents warm moist air from passing into the cold space above a ceiling where it could cause condensation to form.

Metal Body The enclosed metal body of the downlight helps to maintain the sound and airflow rating of the ceiling.


Connection Features

We recognise that your time is money, our Plug-in connector gives you easy access with large terminals and fast connection.Designed initially for lighting circuits to enable isolation of transformers, control gear etc. whilst conducting the

1000V Insulation Resistance Test.

The design of all FlameGuard luminaires already inhibits the flow of air through and behind the fitting. This is a crucial feature of their ability to resist the spread of fire. In order to enhance the appeal of FlameGuard to builders, developers and designers, we are also offering an optional Moisture Seal for use with the FlameGuard fittings which are designed to eliminate the flow of moisture laden air into the void behind the downlighter and thereby reduce the risk of damp and condensation. Independent tests carried out show impressive further reductions of airflow through FlameGuard fittings fitted with the Moisture Seal, all in compliance with BS5250:2002

A great deal of thought went into the design of the terminal block used on FlameGuard fittings. Both MR16 and GU10 lamps can generate high temperatures and only the best quality materials have been used in the construction of this vital assembly.

The silicon sheathed conductors are fed from the downlighter into the ceramic terminal block and secured. The terminal screw heads and recesses are then covered with a GRP moulded cover which prevents detritus building up on the terminal block and possibly creating a fire risk of its own.

The mains GU10 terminal connector block provides a loop-in loop-out facility allowing a series of downlighters to be wired together without the cost and inconvenience of fitting junction boxes.

Community Registered Design No’s 000427463-0002 & 0003

Terminal Blocks

Moisture Seal

Click Flow Plug-In Connector

250V~ 20A Plug-In Connector Large terminals with easy access Terminal screws supplied raised Easy lock and release mechanism Versatile, easy-connection system Increased load handling with 20A rating Male: Max 1.5mm² 3 core cable; Female: Max 3 x 2.5mm² twin and earth (with additional loop terminal)

Also available on a range of FlameGuard downlighters.


Product ApprovalsComplies with BS EN 60598.

Low Energy LED DownlighterLED LIGHTING


Lamp Options ( )

code no. of lampholder max lamps type wattage

230V Downlighter - C/W Selected Lamp

GU318* 1 GU10 6W

Includes Click Flow connector & moisture seal

Fixed LED Downlighter

GU318WH4SCD.

Dimmable Lamp Options ( )


Low Energy LED DownlighterLED LIGHTING




Professional Cast Downlighter



GU300* 1 GU10 50W



GU300CH6SCL.

LED LIGHTING

Lamp Options ( ) Dimmable Lamp Options ( )






GU400* 1 GU10 50W

Includes moisture seal


GU400SC6SWL.

LED LIGHTING


Dimmable Lamp Options ( )Lamp Options ( )

c10

LED LIGHTING





Adjustable Downlighter



GU305* 1 GU10 50W


GU305CH4SCL.


c11

LED LIGHTING








GU405* 1 GU10 50W


GU405BR6SWL.






230V GU10 Housing - C/W Selected Lamp

GU481 1 GU10 50W


Bezels supplied separately, see opposite

Cast Downlighter

Please add required lamp option on to the code e.g. GU4816SCL

LED LIGHTING


c13






Cast 102mm Diameter Round Eyeball Downlighter Bezel

GF480*

Requires GU481 housing.

Cast 102mm Square Wallwash Bezel

GF485*

Requires LV481 or GU481 housing.

Cast Downlighter Bezel

GF480BR.

LED LIGHTING

GF480 GF485

c14

LED LIGHTING






GU460* 1 GU10 50W


Recessed Lamp Downlighter

GU460AB6SWL.

Cast Recessed Downlighter


c15

LED LIGHTING






GU470* 1 GU10 50W


GU470WH4SWL.





IP65 Downlighter & Bezels

IP65 Downlighter Housing


230V Downlighter Housing - C/W Selected Lamp GU395* 1 GU10 50W

Includes Click Flow connector & moisture seal.

Cast Bezels GF495* Cast IP65 Bezel GF590*

Please add required lamp option in to the code e.g. GU3954SCL.

LED LIGHTING






IP65 Downlighter Bezels

GF495 Bezel GF590 Bezel


230V Downlighter Housing - C/W Selected Lamp GU495* 1 GU10 50W

Includes moisture seal.


GF590WH.

LED LIGHTING





230V Fixed Downlighter - C/W LED Lamp (Cool White)

LE415*3SCL 1 GX53 13W

Includes Click Flow connector

230V Adjustable Downlighter - C/W LED Lamp (Cool White)

LE420*3SCL 1 GX53 13W


Low Energy Downlighter - Protruding Lamp

Low Energy GX53 Fittings

LE415SC13W.

Lamp Option

LED LIGHTING





230V Fixed Downlighter - C/W LED Lamp (Cool White)

LE435*3SCL 1 GX53 13W


230V Adjustable Downlighter - C/W LED Lamp (Cool White)

LE440*3SCL 1 GX53 13W


Low Energy Downlighter - Flush Lamp


LE435WH13W.

Lamp Option

LED LIGHTING


MODULAR LOW ENERGY

Low Energy Downlighter



MODULAR LOW ENERGY

Low Energy Downlighter

GU10 & E27 FittingsChoose from the selection of GU10 and E27 fittings.

GU/LE4101 GU/LE4201 GU/LE4211 GU4301

Finishes & BezelsThe 4101, 4201 & 4211 fittings are available in the finishes listed below, where as the 4301 requires a choice of bezel which are available in the same finishes.

GF4300 GF4311 GF4301

Lamp OptionsChoose from the selection of GU10 and E27 lamps.

GU10 Lamp Options:

E27 Lamp Options:


Lamp Options ( )



Low Energy DownlighterMODULAR LOW ENERGY

Fixed Downlighter

GU4101CH6SWL.



GU4101* 1 GU10 50W




Lamp Type Code Description

GU4101WH6SCL 230V 6W LED Cool White GU10 Downlight - White

GU4101CH6SCL 230V 6W LED Cool White GU10 Downlight - Chrome

GU4101SC6SCL 230V 6W LED Cool White GU10 Downlight - Satin Chrome

GU4101WH6SWL 230V 6W LED Warm White GU10 Downlight - White

GU4101CH6SWL 230V 6W LED Warm White GU10 Downlight - Chrome

GU4101SC6SWL 230V 6W LED Warm White GU10 Downlight - Satin Chrome

GU10 Warm White LED

GU10 Cool White LED


Lamp Options ( )




Fixed DownlighterFixed Downlighter



LE4101* 1 E27 12W


LE4101SC12WS.



Lamp TypeLamp Type Code Description

LE4101WH6WSL 230V 6W LED Warm White E27 Downlight - White

LE4101CH6WSL 230V 6W LED Warm White E27 Downlight- Chrome

LE4101SC6WSL 230V 6W LED Warm White E27 Downlight - Satin Chrome

LE4101WH6WSLD 230V 6W Dimmable LED Warm White E27 Downlight - White

LE4101CH6WSLD 230V 6W Dimmable LED Warm White E27 Downlight - Chrome

LE4101SC6WSLD 230V 6W Dimmable LED Warm White E27 Downlight - Satin Chrome

LE4101WH7RWL 230V 7W R63 LED Warm White E27 Downlight - White

LE4101CH7RWL 230V 7W R63 LED Warm White E27 Downlight - Chrome

LE4101SC7RWL 230V 7W R63 LED Warm White E27 Downlight - Satin Chrome

LE4101WH12WS 230V 12W Spiral CFLi Warm White E27 Downlight - White

LE4101CH12WS 230V 12W Spiral CFLi Warm White E27 Downlight - Chrome

LE4101SC12WS 230V 12W Spiral CFLi Warm White E27 Downlight - Satin Chrome

E27 Warm White Spiral

E27 Warm White LED

E27 Warm White R63


Lamp Options ( )




Cast Round Downlighter



GU4201* 1 GU10 50W


GU4201WH6SWL.










GU10 Warm White LED

GU10 Cool White LED


Lamp Options ( )




Cast Round Downlighter



LE4201* 1 E27 12W


LE4201WH12WS.





LE4201CH6WSL 230V 6W LED Warm White E27 Downlight - Chrome












E27 Warm White LED

E27 Warm White R63


Lamp Options ( )




Cast Square Downlighter



GU4211* 1 GU10 50W


GU4211CH6SCL.










GU10 Warm White LED

GU10 Cool White LED


Lamp Options ( )




Cast Square Downlighter



LE4211* 1 E27 12W


LE4211SC6WSLD.

















E27 Warm White LED

E27 Warm White R63


MODULAR LOW ENERGY

Lamp Options ( )



IP65 Low Energy Downlighter

IP65 Cast Square Downlighter


230V Downlighter - C/W Bezel and Selected Lamp

GU4301* 1 GU10 50W

(c/w GF4300 Round Bezel - IP65) Includes Click Flow connector & moisture seal

GU4301CH6SCL.

IP65


MODULAR LOW ENERGY



GU4301WH6SCL 230V 6W LED Cool White GU10 IP65 Downlight - White

GU4301CH6SCL 230V 6W LED Cool White GU10 IP65 Downlight - Chrome

GU4301SC6SCL 230V 6W LED Cool White GU10 IP65 Downlight - Satin Chrome

GU4301WH6SWL 230V 6W LED Warm White GU10 IP65 Downlight - White

GU4301CH6SWL 230V 6W LED Warm White GU10 IP65 Downlight - Chrome

GU4301SC6SWL 230V 6W LED Warm White GU10 IP65 Downlight - Satin Chrome

GU10 Warm White LED

GU10 Cool White LED


MODULAR LOW ENERGY

Lamp Options ( )




IP65 Cast Square Downlighter



GU4305* 1 GU10 50W

(c/w GF4301 Square Bezel - IP65) Includes Click Flow connector & moisture seal

GU4305CH6SCL.

IP65


MODULAR LOW ENERGY



GU4305WH6SCL 230V 6W LED Cool White GU10 IP65 Downlight - White

GU4305CH6SCL 230V 6W LED Cool White GU10 IP65 Downlight - Chrome

GU4305SC6SCL 230V 6W LED Cool White GU10 IP65 Downlight - Satin Chrome

GU4305WH6SWL 230V 6W LED Warm White GU10 IP65 Downlight - White

GU4305CH6SWL 230V 6W LED Warm White GU10 IP65 Downlight - Chrome

GU4305SC6SWL 230V 6W LED Warm White GU10 IP65 Downlight - Satin Chrome

GU10 Warm White LED

GU10 Cool White LED


MODULAR LOW ENERGY

Lamp Options ( )



Drop Glass Low Energy Downlighter

Drop Glass Cast Square Downlighter



GU4320* 1 GU10 50W

(c/w GF4311 Drop Glass Halo Bezel) Includes Click Flow connector & moisture seal

GU4320CH6SCL.


MODULAR LOW ENERGY









GU10 Warm White LED

GU10 Cool White LED


MODULAR LOW ENERGY

Lamp Options ( )




Drop Glass Cast Square Downlighter

LE4320SC6WSLD.



LE4320* 1 E27 12W

(c/w GF4311 Drop Glass Halo Bezel) Includes Click Flow connector & moisture seal


MODULAR LOW ENERGY
















E27 Warm White LED

E27 Warm White R63

HALOGEN

c42




Fixed Downlighter

Fixed Downlighter


230V Downlighter - C/W Halogen Lamp

GU315*A50W 1 GU10 50W


GU315CHA50W.

HALOGEN

c43




Fixed Downlighter

Fixed Downlighter



GU415*A50W 1 GU10 50W

GU415CHA50W.

HALOGEN

c44




Fixed Downlighter

Fixed Downlighter



LV315*A50W 1 GU5.3 50W

Includes Click Flow connector, moisture seal & transformer

LV315CHA50W.

HALOGEN

c45




Fixed Downlighter

Fixed Downlighter



LV415*A50W 1 GU5.3 50W

Transformer required, see page b210

LV415CHA50W.

c46

HALOGEN







GU320*A50W 1 GU10 50W


GU320SCA50W.


c47

HALOGEN







GU420*A50W 1 GU10 50W

GU420CHA50W.


c48

HALOGEN







LV320*A50W 1 GU5.3 50W


LV320SCA50W.


c49

HALOGEN







LV420*A50W 1 GU5.3 50W


LV420CHA50W.


c50

HALOGEN




Eyeball Downlighter



GU425*A50W 1 GU10 50W

GU425BRA50W.

Eyeball Downlighter

c51

HALOGEN




Eyeball Downlighter



LV425*A50W 1 GU5.3 50W


LV425WHA50W.

Eyeball Downlighter

HALOGEN

c52







GU300*A50W 1 GU10 50W


Fixed Downlighter

GU300WHA50W.

HALOGEN

c53







GU400*A50W 1 GU10 50W


Fixed Downlighter

GU400ABA50W.

HALOGEN

c54







LV300*A50W 1 GU5.3 50W


Fixed Downlighter

LV300WHA50W.

HALOGEN

c55







LV400*A50W 1 GU5.3 50W



Fixed Downlighter

LV400ABA50W.

c56

HALOGEN







GU305*A50W 1 GU10 50W


GU305CHA50W.


c57

HALOGEN







GU405*A50W 1 GU10 50W


GU405BRA50W.


c58

HALOGEN







LV305*A50W 1 GU5.3 50W


LV305CHA50W.


c59

HALOGEN







LV405*A50W 1 GU5.3 50W



LV405BRA50W.


c60

HALOGEN




230V GU10 Housing - C/W Halogen Lamp

GU481A50W 1 GU10 50W


Bezels supplied separately, see opposite

12V GU5.3 Housing - C/W Halogen Lamp

LV481A50W 1 GU5.3 50W


Bezels supplied separately, see below


Cast Downlighter


c61

HALOGEN



code

Cast 102mm Diameter Round Eyeball Downlighter Bezel

GF480*

Requires GU481 housing.

Cast 102mm Square Wallwash Bezel

GF485*

Requires LV481 or GU481 housing.

GF485BR.


GF480 GF485

Cast Downlighter Bezel

c62

HALOGEN






GU460*A50W 1 GU10 50W



GU460ABA50W.


c63

HALOGEN






GU470*A50W 1 GU10 50W


GU470WHA50W.


c64

HALOGEN






LV460*A50W 1 GU5.3 50W




LV460ABA50W.


c65

HALOGEN






LV470*A50W 1 GU5.3 50W



LV470WHA50W.


c66

HALOGEN






GU465*A50W 1 GU10 50W


Recessed Lamp Downlighter (internal tilt)

GU465SCA50W.

Professional Cast Wallwash

c67

HALOGEN






LV465*A50W 1 GU5.3 50W



Recessed Lamp Downlighter (internal tilt)

LV465SBA50W.

Professional Cast Wallwash

c68




IP65 DOWNLIGHTER



230V Downlighter Housing - C/W Halogen Lamp GU395A50W * 1 GU10 50W

Includes Click Flow connector & moisture seal.


GF495BR.

IP65 Downlighter Housing & Bezel

c69




IP65 DOWNLIGHTER



230V Downlighter Housing - C/W Halogen Lamp GU495A50W 1 GU10 50W

Includes moisture seal.


GF590WH.



c70






12V Downlighter Housing - C/W Halogen Lamp LV395A50W 1 GU5.3 50W

Includes Click Flow connector & moisture seal. LV395 comes with transformer.



GF495BR.

IP65 DOWNLIGHTER

c71






12V Downlighter Housing - C/W Halogen Lamp LV495A50W 1 GU5.3 50W

Includes moisture seal Transformer required, see page b210



GF590WH.


IP65 DOWNLIGHTER

c72





230V Fixed Downlighter - C/W Lamp (Warm White)

LE415*13W 1 GX53 13W


230V Adjustable Downlighter - C/W Lamp (Warm White)

LE420*13W 1 GX53 13W


Low Energy Downlighter - Protruding Lamp

LOW ENERGY


LE415SC13W.

c73





230V Fixed Downlighter - C/W Lamp (Warm White)

LE435*13W 1 GX53 13W


230V Adjustable Downlighter - C/W Lamp (Warm White)

LE440*13W 1 GX53 13W


Low Energy Downlighter - Flush Lamp

LOW ENERGY


LE435WH13W.

c74



BACK BOXES

Insulation Support Boxes

code description

GB440 To span 400mm roof truss centres

GB460 To span 600mm roof truss centres


As an integral part of the development of the FlameGuard System, our engineers and designers have also been examining other issues connected with the installation of downlighters. One such issue has been the matter of insulation around the back of a downlighter in a ceiling void or attic for example.

Insulation Support Box allows free air circulation around luminaire and provides rigid skin over which insulation can be laid.

Good building practise dictates that insulation material

electrical practise however dictates that a minimum amount of free air is left around a luminaire in order to allow any heat build-up from the light source to be

both of these requirements without compromising either.

GB440/460

Community Registered Design No. 000390091-0001

c75



Product ApprovalsGood protection against ingress of dust and moisture.Complies with BS EN 60598.

BACK BOXES


code description

GB400 Free standing support box 220mm sq x 120mm deep

GB470 340 - 640mm between joists


the Support Boxes are installed in a semi-permanent fashion as required. Once installed, the Support Boxes

downlighter to satisfy the electrician’s requirement and the enclosed nature of the Box allows the builder to install an unbroken insulation barrier.

The Insulation Support Boxes also accommodate transformers used in low voltage installations, thereby allowing any necessary maintenance to be carried out through the downlighter cut-out in the ceiling. The GB440 and 460 Insulation Support Boxes are available

spacings in new builds in the U.K. The pressed steel construction of the Support Box is strong enough to carry a weight of approx. 100kgs without distorting.

The adjustable Insulation Support Box (Item GB470)

or below. The new free standing Support box (Item

easy folding on site.

GB470

Installation from below

GB400

Community Registered Design No. 000497433-0001

c76





BACK BOXES

Cavity Wall Dry Lining Boxes

code description

WA4135 35mm Deep 1 Gang FlameGuard Dry Lining Box WA4235 35mm Deep 2 Gang FlameGuard Dry Lining Box

WA4147 47mm Deep 1 Gang FlameGuard Dry Lining Box WA4247 47mm Deep 2 Gang FlameGuard Dry Lining Box


No additional components to purchase or install

Simple and quick to install saving time and money

Unique spring loaded lugs

Substantial amount of cable entries

FlameGuard back boxes have been tested

BS EN standards. Fire: BS EN 1363-1: 1999 & BS EN 1364-1: 1999Acoustic: BS EN ISO 140-3: 1995 & BS EN ISO 717-1: 1997Complies with Building Regulations Fire tested up to 90 minutes with the capability of the boxes being mounted back to back.

WA4135

WA4235

c77



Product ApprovalsComplies with BS EN 60598.Product ApprovalsComplies with BS EN 60598.

BACK BOXES



FlameGuard back boxes have been tested

BS EN standards. Fire: BS EN 1363-1: 1999 & BS EN 1364-1: 1999Acoustic: BS EN ISO 140-3: 1995 & BS EN ISO 717-1: 1997Complies with Building Regulations Fire tested up to 90 minutes with the capability of the boxes being mounted back to back.

The One & Only Range of Fire & Acoustic Rated Metal Dry Lining Back Boxes.

1 gang and 2 gang boxes in both 35mm and 47mm depths. As simple to install as a standard cavity wall box.

Building Regulations are becoming more stringent in today’s modern world, with alternative building materials and products being developed with improved safety in mind.

Based upon our development and test work carried out with the original FLAMEGUARD downlighters it very quickly became apparent that standard PVC, polycarbonate or urea materials could not tolerate

construction was therefore chosen.

WA4147

WA4247




Bathroom Equipment Zones

There are a number of special requirements for fitting lights in bathrooms and to clarify these requirements, certain

Zones have been created. Within each of these Zones only fittings with certain minimum IP ratings can be installed.

The basic recommendations are set out above.

ZONE 0MINIMUM REQUIREMENT IPX7The actual bath or shower tray - only low

voltage (SELV) fittings are permitted

with the transformer located outside

all zones.

ZONE 1MINIMUM REQUIREMENT IPX4Around and above the bath or shower

enclosure up to a height of 2.25M from

the floor.

ZONES 1 & 2IPX4 & IPX5 REQUIREMENTSMinimum requirement IPX4. This

becomes IPX5 when water jets

are likely to be used for cleaning

purposes or water from the shower

could spray directly onto the

light fitting.

When low voltage (SELV) fittings are

installed, the supply transformer must

be located outside all zones.

ZONE 20.6M from the outer edge of Zone 1.

The window recess area.

For showers without a basin, there is

no zone 2 but an increased zone 1.

IMPORTANTProtection for all electrical fixtures

within the bathroom should be provided

by the use of an RCD with a rated

residual operating current not exceeding

30mA and an operating time not

exceeding 40ms.


Product ApprovalsComplies with BS EN 60598.Product ApprovalsComplies with BS EN 60598.

Click House

Page c75 (Insulation Support)

Page c8 (Professional Cast)

Choose from our comprehensive range for ultimate flexibilty and safety

Page c16 (IP Rated LED)

Page c4 (Condensation Control)Page c74 (Insulation Support)

Page c6 (Low Energy LED)

Versatile and decorative, FlameGuard System products are suitable for a wide range of domestic and

commercial applications.

Illustrated above are just some of those typical applications.


the complete range of electrical accessories

www.scolmore.com

WIRING ACCESSORIES

In addition to the FlameGuard range illustrated herein, a host of other electrical products are available. If you require any wiring accessories please see our NEW BIG BOOK or the Energetic Catalogue for our wide range of lamps. For further information on any of these products please call our sales office on 01827 63454.

In’tu’mes’centDictionary definition – Swelling up, expanding.

How does it work? The FlameGuard intumescent seal, when exposed to fire, forms a dense carbon char which separates and insulates the substrate from the heat of the fire. The expanded seal eliminates the flow of air through the void and thereby starves the fire of vital elements for combustion.

Complies with Class 3 safety extra-low voltage (selv) requirements of BS EN 60598

III

Combination of timber runners with metal webbing.

Combining an engineered composite panel with high grade softwood.

Metal web joists Engineered ‘I’ beam joists

Traditional solid wood joist which has been used in house building for decades.

Solid timber

With the nature of fire testing and the different types of joists, do not take it for granted that a downlighter tested in a solid timber construction will maintain the same integrity within a construction using metal web or enginnered ‘I’ beam joists.FlameGuard has been fire tested in floor constructions with these types of modern joists, and is compliant for both 30 and 60 minutes to BS EN 1365:2000

c81



A il bl Fi i h ( )

Approvals & Standards

If you would like to view a copy of the FlameGuard approvals Compendium, containing test and approvals data evidencing compliance with all of the latest regulations relating to Fire Safety, Noise Ingress and Control of Airborne Moisture etc., please call 01827 63454 or e-mail us at [email protected]

FlameGuard System downlighters have been fully tested and approved as fire and acoustic rated fittings according to the following criteria:Complies with Part B of Building regulations.

Fire tested to full 90 minute rating and approved to BS 476 Part 21 1987 with solid timber joists.

Fire tested to 60 minutes rating by BRE and approved to BS EN 1365-2: 2000 with both metal web and ‘I’ beam engineered joists.

Fire & Acoustic testing carried out using plasterboard, timber joist and tongue and groove floor construction.

Acoustically tested and approved by The Building Test Centre to BS EN ISO 140-3: 1995, BS EN ISO 140-6: 1998, BS EN ISO 7171: 1997,BS EN ISO 717-2: 1997 and Appendix F of Robust Details Ltd. All in compliance with the relevant sections of Part E of Building Regulations.

Tested in accordance with Robust Details requirements.

FlameGuard downlighters are accepted by the NHBC as satisfying their requirements relating to levels of air movement through the fitting.

Testing carried out in relation to Part C of Building Regs. As it relates to passage of moisture laden air into cold spaces such as lofts etc., in compliance with BS5250: 2002

All FlameGuard luminaires are supplied with comprehensive and easy to follow installation instructions in compliance with Part P of Building Regulations

The Low Energy FlameGuard fitting meets the requirements of Part L of Building Regulations relating to the installation of low energy luminaires

Complies with Scottish Building Regulations, Section 2 (fire), Section 3 (air movement) and Section 5 (noise)

Accepted by

NHBCA

More than just a Downlighter. Full 90 Minutes Fire Rating. Integrated Fire and Acoustic Barrier.

system

™®

Approvals & Accreditations

system

™®

Fire, Acoustic and Condensation Control

Avavaailailailablebleble FiFiFinisnisnishesheshes (((*)ATested in

accordance with Robust Details requirements.



Product Description Cutout Recess Depth Airflow Page Code (mm) (mm) M3/hr

GU315 230V 50W Fixed Downlighter 67 80 0.023 c42GU318 230V 5.5W LED Fixed Downlighter 67 105 0.023 c6 GU415 230V 50W Fixed Downlighter 67 85 0.023 c43LV315 12V 50W Fixed Downlighter 67 80 0.023 c42LV315 12V 50W Fixed Downlighter 67 80 0.023 c42LV415 12V 50W Fixed Downlighter 67 80 0.023 c43GU300 230V 11W Fixed Downlighter 70 115 0.052 c52GU400 Cast 230V GU10 50W Fixed Downlighter 70 115 0.052 c53LV300 12V 50W Fixed Downlighter 70 110 0.052 c52LV400 Cast 12V GU5.3 50W Fixed Downlighter 70 110 0.052 c53GU320 230V 50W Adjustable Downlighter 83 95 0.119 c46LV320 12V 50W Adjustable Downlighter 83 90 0.119 c46LV420 12V 50W Adjustable Downlighter 83 90 0.119 c47GU305 230V 50W Adjustable Downlighter 88 110 0.046 c56GU405 Cast 230V 50W Adjustable Downlighter 88 110 0.046 c57LV305 12V 50W Adjustable Downlighter 88 105 0.046 c56LV405 Cast 12V 50W Adjustable Downlighter 88 105 0.046 c57LE415 230V LE 13W Fixed Downlighter 90 32 - c72LE435 230V LE 13W Fixed Downlighter 90 52 - c73GU460 Cast 230V 50W Recessed Downlighter 92 100 0.045 c14GU465 Cast 230V 50W Wallwash 92 100 0.045 c66GU470 Cast 230V 50W Reflector Downlighter 92 100 0.045 c15GU481 Cast 230V 50W Eyeball Downlighter 92 100 0.045 c60 LV460 Cast 12V 50W Recessed Downlighter 92 95 0.045 c14LV465 Cast 12V 50W Wallwash 92 95 0.045 c66LV470 Cast 12V 50W Reflector Downlighter 92 95 0.045 c15LV481 Cast 12V 50W Eyeball Downlighter 92 95 0.045 c60GU425 230V 50W Eyeball Downlighter 98 103 0.089 c50GU4101 230V 50W Fixed Downlighter 98 124 0.412 c22 GU4201 Cast 230V 50W Fixed Downlighter 98 124 0.412 c26GU4211 Cast 230V 50W Fixed Downlighter 98 124 0.412 c30GU4301 Cast 230V 50W Fixed Downlighter 98 124 0 c34LE420 230V LE 13W Fixed Downlighter 98 42 - c72LE440 230V LE 13W Adjustable Downlighter 98 62 - c73LE4101 230V 50W Fixed Downlighter 98 124 0.412 c24LE4201 Cast 230V 50W Fixed Downlighter 98 124 0.412 c28LE4211 Cast 230V 50W Fixed Downlighter 98 124 0.412 c32LV425 12V 50W Eyeball Downlighter 98 98 0.089 c50GU495 240V 50W IP65 Downlighter Housing 75 115 0 c17 LV495 12V 50W IP65 Downlighter Housing 75 110 0 c17

The tablesbelow is designed to illustrate which fittings are suitable for retro fitting in installations where cut-out and recess parameters are restricted.

Recessed ceiling lights (downlighters) are a potential leakage path for the convection of moist air through a ceiling and consequential problems in the roof or loft space. Building Regulations Approved Document Part C2: 2004 Resistance to moisture refers to BS 5250: 2002 as the main means of compliance with the requirement laid down in relation to resistance to damage from interstitial and surface condensation.Amendment No. 1 (December 2005) to BS 5250: 2002: Code of Practice for control of ventilation in buildings (Clause 8.4.1.2 thereof) requires that the leakage through all downlighters in a

ceiling beneath a roof should not exceed 0.06m3/h m2 at a pressure difference of 2 Pa in order to restrict moisture ingress into roofs,. BS 5250: 2002 invokes BS EN 13141-1: 2004: Ventilation for buildings – Performenace testing of components/products for residential ventilation – Part 1: Externally and internally mounted air transfer devices for the test procedure to be used to determine the air leakage through downlighters. The National House-Building Council (NHBC) also requires that downlighters be tested for air leakage compliance to BS 5250: 2002 by an independent organization (NHBC Technical Newsletter, Dec 2004, Issue 31).

FLAMEGUARD SYSTEM

Documents

Transcript of FLAMEGUARD SYSTEM