FILTERS AND BAG HOUSES - magnumsystems.com · FILTERS AND BAG HOUSES Engineering, Design &...
2
FILTERS AND BAG HOUSES Engineering, Design & Manufacturing to Keep the Line Moving BIN VENT FILTER The standard configuration is for a Style II high-pressure pulsejet filter using 16 oz/yd2 felted Dacron Polyester filter bags designed to be removed from the bottom of the tube sheet. The unit will have: Features • Compressed air header • Rated for 17-inch W.C. • Mineral reinforced nylon bag cups and venturiis • Stainless steel bag clamps • Diaphragm valves pre-plumbed to solenoids • Smart timer board with built-in LED readout, switch & 4-20 mA output capability of differential pressure readings • NEMA 4 solenoid valves standard • Timer and solenoids mounted in a NEMA 4 enclosures • 1 ea. hinged side access door • Filter bag catch grate • Materials of construction: carbon steel (standard) Optional Features • Stainless steel construction available upon request • 60° and 70° hopper (Style III) available • PTFE coating to bags • High temperature (375°F)* • NEMA 7/9 enclosure • 304 stainless steel product contact • Top load bags and cages When using Filter Elements instead of bags, elements are 8 oz/yd2 spun bound polyester. The standard element is 45-pleat construc- tion, with wide pleat spacing available.* High temperature includes: Paint changed to high temp paint, bags changed to 14 oz/yd2 Nomex, Diaphragm valves changed to Viton, Poly-flo tubing from diaphragm to solenoids changed to copper tubing, door gasket changed to red silicone.*
Transcript of FILTERS AND BAG HOUSES - magnumsystems.com · FILTERS AND BAG HOUSES Engineering, Design &...
FILTERS AND BAG HOUSES
Engineering, Design & Manufacturingto Keep the Line Moving
BIN VENT FILTER
The standard configuration is for a Style II high-pressure
pulsejet filter using 16 oz/yd2 felted Dacron Polyester
filter bags designed to be removed from the bottom of
the tube sheet. The unit will have:
Features
• Compressed air header
• Rated for 17-inch W.C.
• Mineral reinforced nylon bag cups and venturiis
• Stainless steel bag clamps
• Diaphragm valves pre-plumbed to solenoids
• Smart timer board with built-in LED readout, switch & 4-20 mA output capability of differential pressure readings
• NEMA 4 solenoid valves standard
• Timer and solenoids mounted in a NEMA 4 enclosures
• 1 ea. hinged side access door
• Filter bag catch grate
• Materials of construction: carbon steel (standard)
Optional Features
• Stainless steel construction available upon request
• 60° and 70° hopper (Style III) available
• PTFE coating to bags
• High temperature (375°F)*
• NEMA 7/9 enclosure
• 304 stainless steel product contact
• Top load bags and cages
When using Filter Elements instead of bags, elements are 8 oz/yd2 spun bound polyester. The standard element is 45-pleat construc-tion, with wide pleat spacing available.*
High temperature includes: Paint changed to high temp paint, bags changed to 14 oz/yd2 Nomex, Diaphragm valves changed to Viton, Poly-flo tubing from diaphragm to solenoids changed to copper tubing, door gasket changed to red silicone.*
www.magnumsystems.com
Toll Free 800.748.7000 Fax 913.362.7863
1250 Seminary Street, Kansas City, KS 66103
©2017 Magnum Systems, Inc. All rights reserved. Catalog number MS.4015.1217
FILTERS AND BAG HOUSES
J
J
C
D
G TYP.
F TYP.
E NUMBER OF SPACES @ 4-INCHCENTERS TYP.
1 INCH TYP.
13-INCH MAXIMUM
14 INCHES
BAG CATCH GRID
H NUMBER OF HOLES @ 0.5-INCH Ø
LIFT LUGS (4) TYP.
EXHAUST FAN FLANGE ADAPTER
SOLENOID ENCLOSURE
1-INCH FNPT HIGH-PRESSURECONNECTION (BOTH SIDES)USE ONLY ONE
Diagram dimensions are for reference only*
Sizes of longer cartridges that may be available. Contact us with your specific application information.*
Dimensions & Ordering Information
FILTER
MODEL #
NUMBER
OF BAGSCAGE/BAG
LENGTH
FILTER AREA (SF)-(A)
(F) (G) (H)
EST. WEIGHT
(LBS.)
(B)(C)
HEIGHT
(D) (E)
FLANGE DIMENSIONS
(J)CARTRIDGEBAG
45-PLEAT
480
361
267240
855
641
474
427
1336
1002
742
668
1923
1443
1068
962
2618
1963
14541309
30
38
46
54
64
5
7
9
11
14
4
4
4
4
3
2
2
2
2
3
26
34
42
50
5860
52
44
36
28
674739
787
834
1140
1067
993
907
1119
1230
1323
1416
1692
1578
1464
1332
17471919
2071
2223
7361
97
85
36BV948BV9
60BV9
72BV9
3648
60
72
9
36
48
60
72
16
36
49
25
36
48
60
72
36
48
60
72
36
48
60
72
36BV16
48BV16
60BV16
72BV16
36BV25
48BV25
60BV25
72BV25
36BV36
48BV36
60BV36
72BV36
36BV4948BV49
60BV49
72BV49
79.0
65.2
51.337.5
140.5
115.9
91.3
66.6
219.5
181.0
142.6
104.1
316.1
260.7
205.3
150.0
430.2
354.8
279.5204.1
7361
97
85
7361
97
85
7361
97
85
7361
97
85
3420
2565
19001709
72 16 3 3 6668
20952290
2465
2640
64
36
48
60
72
36BV6448BV64
60BV64
72BV64 561.9
463.5
365.0266.6
7361
97
85
BIN VENT LOCATION IN A PRESSURE TRANSFER SYSTEM
