Heena Tejwani Project On HTML and CSS ,Final Year BCA ,Dezyne E'cole College
Fashion Design student work (Dezyne E' cole College)
-
Upload
dezyneecole -
Category
Design
-
view
52 -
download
0
Transcript of Fashion Design student work (Dezyne E' cole College)
CASE STUDY
DESIGNING
PRESENTED BY : KHUSHBOO KHUNTWAL B. Sc. FT. 1ST YEAR DIPLOMA FASHION TECHNOLOGY
DESCRIPTION OF GARMENT FABRICS NOTIONS
MEASUREMENTS :
2 metallic hooks2 metallic eyes1 metallic zipper 4”
FABRIC NEEDED:-
Dezyne E’Cole College,Ajmer Submitted By :-
Khushboo Khuntwal 1st Year Diploma FT
SUITABLE:-
UNSUITABLE:-
METRIC IMPERIAL
Dress length 38”
waist length 14”
Shoulder Width 4”
Sleeve Length 8”
BODY MEASUREMENT
GARMENT MEASUREMENT
ROUND CHESTROUND WAISTROUND HIP
34”261/2”
36”
CHEST 36”
WAIST 31”
HIP 39”
SMALL MEDIUM LARGE SMALL MEDIUM LARGE
CASE STUDY : 1 11 Pieces
Topper and skirt, Topper with attached Epaulette sleeve with sleeve band andround neck, basic straight skirt attached with waist belt
Cotton Polyester, Cotton,soft Denim Blended fabric
Silk ,Nylon ,Hosiery. Organdy.
METRIC IMPERIAL
34” 38”
29” 331/2”37” 401/2”
4” 4.2”37” 39
13.4” 14”
.4”
8” 8”
.
32” 36”24” 28”35” 38”
.
8060
87.5
8572.5
92.510
92.533.520 20 20
8566.1/4
90
90
90
77.597.51095
35 35
7095
9583.3/4
101.1/410.598.5
103.5" 258.75
DETAIL OF DRESS
In this case study I have given the details of the design ,and have included the following details :-
Flat Design :- An hour glass silhouette. The top is a basic bodice with short sleeves having epaulette design variation . The neckline is round and the hemline is straight . The skirt is a basic straight skirt with a 2’’waist band
Measurements :- The measurement chart for a medium (34’’) size, female. Seam allowances have also been given.
Notions :- Zips, buttons, threads, and other requirements are given in details.
Drafting Patterns :- 11 patterns are required for drafting. They are in 1/8’’ Scale.
Estimation Sheet :- 103.5”meter of total fabric is required for the constriction of the garment.
Fabric :- Blended cotton fabric are used . {65% cotton and 35% polyester }.
Color :-
Seams :- welt, single top, plain seam are used.
Design Variation :- in seams, fabric, color, and design that can be given.
white with blue stripe top {upper part}blue with white stripe skirt & sleeve {lower part }
DESIGN VARIATION
The variations that could be made in the design are
Fabric :- Which can be used : Cotton blends. Voile, Jorgettes, Chiffons soft denims, Which should be avoided: Wool, Brocades, Tusser silk, Linen, Woolen blends,
Seams :- Double top seam, French seam, Abutted seam, Welt, and Closed slot seam.
Color :- A wide range of colored fabrics can be used. All Whites, muted,
the skirt we can use horizontal, vertical or diagonal stripes
checks :- even or uneven.
Design Variation:
Blended fabrics, self woven fabrics
pastels, and pale colors can be used for the top’ Whereas dark shades and tones of different colors can be used.
Prints :- Floral and geometrical prints can be used in the top. In
,
epaulette variation applique work
plain sleeve
sleeve bend
embrodreyed patch work
a line hem
waist belt
front dart
a line hem line
DEZYNE E’ COLE
GARMENT CONSTRCATION
CASE STUDY NUMBER -
STYLE NOUMBER - COLOUR -
FABRIC TYPE - YARDEGE OF FABRIC -
PRODUCT TYPE - SAMPEL SIZE -
DESIGN OF GARMENT FRONT PART
DESIGN OF GARMENT BACK PART
DEZYNE E’ COLE
GARMENT CONSTRCATION
CASE STUDY NUMBER - 1
STYLE NOUMBER - 1 COLOUR – WHITE WITH BLUE STRIP, BLUE WITH WHITE STRIP
FABRIC TYPE – BLENDED FABRIC YARDEGE OF FABRIC – 36”
PRODUCT TYPE – WOMENS WEAR SAMPEL SIZE – 34” MEDIAM SIZE
DESIGN OF GARMENT FRONT PART
DESIGN OF GARMENT BACK PART
MEASUREMENTS REQUIRED
SEAM ALLOUNCE
TOPPRE FRONT & BACK
SKIRT BELT ½”
SKIRT BOTTOM FOLDING 1”
DRESS LENGTH 38” SHOULDER ¾”
FRONT LENGTH 171/2” NECK LINE ¼”
BACK LENGTH 171/2” ARM HOLE ¼”
CENTER FRONT LENGTH 14½” SIDE SEAM ½”
CENTER BACK TO PRINCESS LINE
2 5/8 TOPEER BOTTOM FOLDING 1”
CENTER FRONT TO PRINCESS LINE
2 ¾” EAPULETTE SACTION ½”
BUST 34” SLEEVE BEND ½”
WAIST 26” REMARKS ACROSS FRONT 15”
ACROSS BACK 171/4”
SHOULDER WIDTH 4” SEAMS SINGLE TOP, WELT
NECK DEPTH FRONT
4”
SEAM.
NECK DEPTH BACK
3” HEAM LINE STRIGHT HEM LINE
APEX MEASURMENT
3 ¾” EDGE FINISHING
SHOULDER BLEAD
7” NECK PIPING
SHULDER TO WAIST LINE 14¾” SLEEVE BEND
WELT SEAM
FRONT WAIST LINE
13½” TOPPER EDGE SINGLE TOP SEAM
BACK WAIST LINE
12”
SKIRT HEM
SINGLE TOP SEAM
SKIRT BELT TOP SEAM
SLEEVE FRONT & BACK
NEEDSLE NO. 16
NEEDLE SIZE
SLEEVE LENGTH 8” EPAULETTE FRONT & BACK 3” THREAD COLOUR WHITE
BICEP CURCUMFERENCE 12 ½” THREAD NO. 081
SLEEVE BAND
2” THREAD MATERIAL COTTON POLYESTR
STITCH PER INCH 10 SKIRT FRONT & BACK PART
PIN DRESS MAKER
SIZE 25MM.&L.30MM
SKIRT LENGTH
21”
HIP LEINGTH 7”
FRONT DART LENGTH 3 ½”
BACK DART LENGTH 5 ½”
SPACE OF BOTH SIDE DART FRONT
5”
SPACE OF BOTH SIDE DART BACK
4.7
FRONT &BACK HIP LINE 9 3/8”
WAIST BELT WIDTH 2”
FRONT WAIST LINE 6 ¾”
BACK WAIST LINE 6”
C. F. PRINCESS LINE 2 ¾”
C.B. PRINCESS LINE 2 5/8”
TRIMS HOOK & EYE 2
ZIPPER 1
ZIPPER SIZE 4” LENGTH
TYPE OF MATIRIYEL METALLIC
2D PATTERNS OF DRESS
{NOTE:-TOP NECK, SLEEVE CURVE, ARMHOLE, AND SKIRT DARTS SEAM ARE USED 1/4”SEAMAND SHOULDER, HEM, SIDE SEAM, BELT, BOTH SECTION OF SLEEVE ARE USED 1/2”SEAM.}
WITHOUT SEAM PATTERN
WITH SEAM PATTERN
LAYOUT OF DRESS
WIDTH OF FABRIC 36”
LE
NG
TH
OF
FA
BR
IC 3
3.5
”
WIDTH OF FABRIC 36”
LE
NG
TH
OF
FA
BR
IC 7
0”
LAYOUT OF TOP AND SLEEVE BEND
LAYOUT OF SKIRT AND SLEEVE
ESTIMATION OF FABRIC UPPER & LOWER PART
LENGTH OF FABRIC FOR SLEEVE AND SKIRT
BLUE WITH WHITE STRIPE FABRIC 70”(175 C. M.)
LENGTH OF FABRIC FOR TOP AND SLEEVE BEND
WHITE WITH BLUE STRIPE FABRIC 33.5” (83. 75 C. M.)
TOTAL LENGTH OF FABRIC 103.5” METER (258.75 C. M. )
FRONT PART
BACK PART
SPECIFICATION SHEET
neck depth 4”
neck finished with piping 1”& attached with single top seam
sleeve bend 1” wide & attached with welt seam
topper hem finished with single top seam
finished with 2 metallic hook & eye
straight hemline finished with single top seam
front dart length 3 1/2”
right & left side dart width 5”
epaulette sleeve
epaulette sleeve
neck depth 3”
neck finished with piping 1”& attached with single top seam
sleeve bend 1” wide & attached with welt seam
topper hem finished with single top seam
flare hemline finished with single top seam
back dart length 5 1/2”
right & left side dart width 4.12”
slit opening finished with metallic zipper 4”
finished with 2 metallic hook & eye
slit opening finished with metallic zipper 4”
2”waist belt
2”waist belt
PRODUCT SPECIFICATION OF DRESS
STRAIGHT HEMLINE FINESSED WITH SINGLE TOP SEAM
STRIPED FABRIC
WAIST BELT
FRONT & BACK DART
SINGLE TOP SEAM
METALLIC ZIPPER
SINGLE TOP SEAM{.5 PRESER FOOT}
COTTON POLYESTER
WELT SEAM
COTTON POLYESTER FABRIC
ROUND NECK LINE FINESSED WITH PIPING
SLEEVE BEND
STRIAGHT HEM