EXZ11

R

EX-Z11

FEB. 2007

(without price)

Ver.1 : Mar. 2007

CONTENTS

SPECIFICATIONS ....................................................................................................................................... 1

BLOCK DIAGRAM ...................................................................................................................................... 5

TEST MODE ................................................................................................................................................ 6

PROGRAM VERSION UPGRADING .......................................................................................................... 7

1. To update the firmware version ..................................................................................................... 7

2. How to restore the firmware ........................................................................................................... 8

3. To install the firmware .................................................................................................................... 9

ADJ TOOL ................................................................................................................................................. 10

1. Preparation ..................................................................................................................................... 10

2. How to use ADJ Tool when replacing Lens unit ........................................................................ 12

3. How to use ADJ Tool when replacing MAIN PCB ...................................................................... 13

VCOM DC ADJUSTMENT ........................................................................................................................ 14

CURRENT CONSUMPTION ..................................................................................................................... 17

THE COUNTERMEASURE FOR "SYSTEM ERROR" ............................................................................. 17

RESETTING THE PLACE OF DESTINATION .......................................................................................... 18

DISASSEMBLY ......................................................................................................................................... 19

ASSEMBLY ............................................................................................................................................... 25

EXPLODED VIEW ..................................................................................................................................... 30

PARTS LIST .............................................................................................................................................. 32

PRINTED CIRCUIT BOARD ..................................................................................................................... 33

— 1 —

SPECIFICATIONS

Image Files Format Snapshots : JPEG (Exif Ver.2.2); DCF (Design Rule for Camera File System) 1.0 standard;

DPOF compliant

Movies : Motion JPEG AVI format

Audio : WAV

Recording Media Built-in Memory 8.0 MB, SDHC Memory Card, SD Memory Card, MMC (MultiMediaCard),

MMCplus (MultiMediaCardplus)

Approximate Memory Capacity and File sizes• Snapshots

• Movies

* The number of image values is approximate and are provided for reference only. The actual number of images you may be able

to record may be less than that indicated on the monitor screen.

* Image files sizes are approximate and are provided for reference only. Actual image file sizes vary depending on subject type.

* Based on Matsushita Electric Industrial Co., Ltd. products. The number of images you can save depends on the type of memory

card you are using.

* To determine the number of images that can be stored on a memory card of a different capacity, multiply the capacities in the

table by the appropriate value.

ImageQuality(Pixels)

HQ640 x 480

Normal512 x 384

LP320 x 240

MaximumRecording

Time Per File

10 minutes

10 minutes

10 minutes

Approximate Data Rate(Frame Rate)

10.2 Megabits / second(30 frames / second)



ApproximateRecording Time for

Builtin Memory 8.0 MB

6 seconds

10 seconds

26 seconds

ApproximateRecording Time for SDMemory Card* 256MB

3 minutes,15 seconds



Image Size(pixels)

7M3072 x 2304

3:23072 x 2048

16:93072 x 1728

5M2560 x 1920

3M2048 x 1536

2M1600 x 1200

VGA640 x 480

ImageQuality

FineNormal

EconomyFine

NormalEconomy

FineNormal

EconomyFine

NormalEconomy

FineNormal

EconomyFine

NormalEconomy

FineNormal

Economy

Approximate ImageFile Size

4.32 MB2.4 MB

1.44 MB3.84 MB2.2 MB

1.28 MB3.24 MB2.1 MB

1.08 MB3.0 MB2.0 MB1.0 MB

1.92 MB1.28 MB640 KB1.17 MB780 KB390 KB360 KB240 KB120 KB

Approximate Built-inMemory (8.0MB)

Capacity1 image3 images5 images2 images3 images5 images2 images3 images6 images2 images3 images7 images4 images5 images11 images6 images9 images

17 images20 images30 images57 images

Approximate SDMemory Card*

(256MB) Capacity55 images97 images

158 images61 images

105 images176 images72 images110 images206 images78 images116 images221 images121 images180 images348 images196 images286 images529 images624 images937 images

1740 images

— 2 —

Delete Single-file, all files (with protection)Effective Pixels 7.2 millionImaging Element 1/2.5-inch square pixel color CCD (Total pixels: 7.41 million)Lens/Focal Distance Lenses: F3.1 (W) to 5.9 (T); f=6.3 (W) to 18.9mm (T) (equivalent to approximately 38 (W) to

114mm (T) for 35mm film)6 lenses in 5 groups, with aspherical lans

Zoom 3X optical zoom; 4X digital zoom (Image Size: 7M (3072 x 2304pixels)) (12X in combinationwith optical zoom)

Focusing Contrast Detection Auto FocusFocus Modes Auto Focus, Macro mode, Pan Focus, Infinity mode, manual focusAF Area spot, multi

Approximate Focus Range Auto Focus : 40 cm to ∞ (1.3' to ∞)(from lens surface) Macro : 10 cm to 50 cm (3.9" to 19.7")

Infinity Mode : ∞Manual : 10 cm to ∞ (3.9" to ∞)• Using optical zoom causes the above ranges to change.

Exposure Control Light Metering: Multi-pattern, center-weighted, spot by CCDExposure: Program AEExposure Compensation: -2EV to +2EV (in 1/3EV steps)

Shutter CCD electronic shutter; mechanical shutterSnapshot mode (Auto): 1/2 to 1/2000 second• Shutter speed is different for the following BEST SHOT scenes.

Night Scene: 4 to 1/2000 secondFireworks: 2 seconds (fixed)

Aperture F3.1/4.4 auto switching• Using optical zoom causes the aperture to change.

White Balance Auto WB, fixed (6 modes), manual switchingSensitivity Snapshots:

Auto, ISO 50, ISO 100, ISO 200, ISO 400• Maximum sensitivity is ISO 800 when the BEST SHOT Anti Shake or High Sensitivity scene is

being used.Movies: Auto

Self-timer 10 seconds, 2 seconds, Triple SelftimerBuilt-in Flash

Flash Modes Auto Flash, ON, OFF, Red eye reduction, Soft FlashFlash Range Wide Angle Optical Zoom : 0.1 to 3.5 meters (0.3' to 11.5')

Telephoto Optical Zoom : 0.6 to 1.9 meters (2.0' to 6.2')* ISO Sensitivity: “Auto”* Depends on zoom factor.

Recording Functions Snapshot; audio snapshot; macro; self-timer; Continuous shutter; BEST SHOT mode;movie with audio; Voice Recording• Audio recording is monaural.

Audio Recording Time Audio Snapshot : Approximately 30 seconds maximum per imageVoice Recording: Approximately 24 minutes with built-in memoryAfter Recording : Approximately 30 seconds maximum per image

Monitor Screen 2.6-inch Wide TFT color LCD114,960 pixels (479 x 240 pixels)

Viewfinder Monitor ScreenTimekeeping Functions Built-in quartz digital clock

Date and Time : Recorded with image dataAuto Calendar : To 2049World Time : City; Date; Time; Summer time; 162 cities in 32 time zones

Input/Output Terminals USB/AV connectorUSB USB 2.0 (Full-Speed) compatibleMicrophone MonauralSpeaker Monaural

— 3 —

Supported Battery: NP-20 (Rated Capacitance: 700mAh)

Storage Medium: SD Memory Card

*1 Number of Shots (CIPA Standard)

• Temperature: 23°C (73° F)

• Monitor Screen: On

• Zoom operation between full wide to full telephoto every 30 seconds, during which two images are recorded, one image with

flash; power turned off and back on every time 10 images are recorded.

*2 Continuous Snapshot Playback Conditions

• Temperature: 23°C (73° F)

• Scroll one image about every 10 seconds

*3 Voice recording times are based on continuous recording.

• The above values are based a new battery, starting from a full charge. Repeated charging shortens battery life.

• Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on greatly affects recording time and number of

shots values.

Power Consumption 3.7V DC Approximately 4.0WDimensions 95.4 (W) ✕ 60.6 (H) ✕ 19.6 (D) mm (3.8"(W) ✕ 2.4"(H) ✕ 0.77"(D))

(excluding projections; 16.2 mm (0.64") at thinnest point)Weight Approximately 122 g (4.3 oz) (excluding battery and accessories)

Bundled Accessories Rechargeable lithium ion battery (NP-20); Battery charger (BC-11L); AC power cord;

USB cable; AV Cable; Strap; CD-ROM; Basic Reference

Power RequirementsPower Requirements Lithium ion rechargeable battery

(NP-20) x 1Approximate Battery Life:The values below indicate the amount of time under the conditions defined below, until power automatically turns off due to battery

failure. They do not guarantee that you will be able to achieve this level of operation. Low temperatures shorten battery life.

Approximate Battery Life230 shots260 minutes105 minutes260 minutes

OperationNumber of Shots (CIPA Standard)*1

Continuous Snapshot Playback*2

Continuous Movie RecordingContinuous Voice Recording*3

— 4 —

Rechargeable Lithium Ion Battery (NP-20)Rated Voltage 3.7 V

Rated Capacitance 700 mAh

Operating Temperature 0 to 40°C (32 to 104°F)

Dimensions 33.0 (W) ✕ 50.0 (H) ✕ 4.7( D) mm (1.3˝(W) ✕ 2.0˝(H) ✕ 0.19˝(D))

Weight Approximately 16 g (0.56 oz)

Power Supply

• Use only the special rechargeable lithium ion battery (NP-20) to power this camera. Use of any other type of battery is not

supported.

• The camera does not have a separate battery for the clock. The date and time settings of the camera are cleared about one day

after power is cut off from the battery. If this happens, be sure to reconfigure these settings after power is restored.

LCD Panel

• The liquid crystal panel of the monitor screen uses high-precision technology that provides a pixel yield in excess of 99.99%.

This means that some pixels may not light or may remain lit at all times. This is due to the characteristics of the liquid crystal

panel, and does not indicate malfunction.

Lens

• Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction.

• You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight.

This is due to the characteristics of lens, and does not indicate malfunction of the camera.

Special AC Adaptor

• Power cord precautions for use in Singapore

The power cord set is not supplied. The power cord used must comply with relevant national and/or international standards.

Battery Charger (BC-11L)Power Requirement 100 to 240V AC, 80mA, 50/60Hz

Output 4.2V DC, 600 mA

Charging Temperature 5°C to 35°C (41°F to 95°F)

Chargeable Battery type Rechargeable lithium ion battery (NP-20)

Full Charge Times Approximately 90 minutes

Dimensions 55 (W) ✕ 86 (H) ✕ 20 (D) mm (2.2"(W) ✕ 3.4"(H) ✕ 0.79"(D)) (excluding projections)

Weight Approximately 58 g (2.0 oz)

— 5 —

BLOCK DIAGRAM

EV

CC

3.3

VC

C3.

3DV

CC

3.3A

VC

C1.

2V

CC

1.8

8bit-

Mic

on

UP

D78

F80

11(N

EC

)

96pi

n (I

C45

0)

ST

RO

BE

VC

C3.

3-1

VC

C13

CV

EE

7.5C

AF

E+

CD

S+

Vdr

AD

9923

A

105p

in (

IC30

0)

Tita

n-D

RA

M12

8

337p

in (

IC40

0)

VC

C3.

3DV

CC

3.6

Mot

or-D

rv

LV80

54LP

40pi

n (I

C50

1)

VC

C3.

3A AU

DIO

AK

4633

24pi

n (IC

700)

VC

C3.

3A

VID

EO

AK42

50VU

-L

8pin

(IC

401)

LCD

+ B

L

15pi

n (C

N80

3)

SD

car

d

12pi

n (C

N80

1)

US

B/A

V c

able

8pin

(C

N80

0)

11pin (CN802)

27pin (CN203) 23pin (CN500)

37pi

n (C

N60

0)

KEY MIC SP

CCD: 7M

— 6 —

TEST MODE

Note: Never perform the menu items unless otherwise instructed. Doing so may cause destruction ofthe data inside, which will make the camera unusable.

� To boot the test mode

1. While firmly pressing down both [BS] and [UPPER (DISP)], turn the power on.

1 : V E R S I O N I N F O2 : U S B T C C T E S T3 : R O M U P D AT E4 : L A S T M E M O R Y5 : F O R M AT

+ + K X 8 2 9 + +V e r 1 . 0 0

1 : U S B T C C O N2 : U S B T C C O F F3 : U S B S T O R A G E4 : U S B S P E E D

"SET" button

"MENU" button

"DOWN" button -> "DOWN" button -> "BS" button -> "MENU" button

2. After the version appears, press buttons in the order of [DOWN], [DOWN], [BS] and [MENU] in 0.5second. The diagnostic menu appears.

[BS] button

[MENU] button [BS] button

[DOWN] button

[UPPER(DISP)] button

— 7 —

PROGRAM VERSION UPGRADING

1. To update the firmware version

1. Prepare the memory card which contains the firmware for EX-Z11 in the root directory.

EX-Z11.bin

2. Insert the above memory card into the camera, and set a fully charged battery in the camera.

3. Press the [power button] while holding [MENU] depressed. Keep holding [MENU] depressed until“PROGRAM UPDATE” appears in the display.

• The following appears.

• The version of the firmware in the memory card appears at the bottom of the display.

NOTE 1) When a wrong software is mistakenly used,the message below appears. Update thefirmware again with the correct software.

PROGRAM UPDATEYESNO

NEW VERSION ISVER 1.00

FILE ERROR!

VER 1.00

NOTE 2) When only the version appears in the displayeven though you are trying to operate thecamera, charge the battery to the fullest andtry again. The level of the battery indicatorshould be highest in order to update thefirmware.

4. Align the white cursor to [YES] by [UPPER] and [DOWN], and then press [SET].

• “NOW LOADING” appears in the display and the update starts.

5. “COMPLETE” appears after the update finishes.

6. Remove the memory card after turning the power off once. Turn the power back on again while holding[MENU] depressed, and check the version.

• “VER.1.00” appears.

7. If the version is correct, turn the power off.

8. Finally, check the operation by recording, playing back and deleting an image.

(As of February 2007)

(As of February 2007)

— 8 —

2. How to restore the firmware

1. Prepare the firmware restoration program.

uranus.bin

NOTE: This software and procedure automatically restores the firmware even if the firmware belongsto a wrong model code. Make sure to use the correct software for the correct model.

2. Copy the above file to the root directory in the memory card.

3. Insert the memory card into the camera.

4. Set a fully charged battery in the camera.

NOTE: This software and procedure automatically restores the firmware even if the battery capacity ofthe camera is low. Make sure to use a fully charged battery to prevent the danger of powerdown during firmware restoration.

5. Turn the power on while pressing the [shutter release] button.

If the power does not turn on only by pressing the power button, insert the battery while holding the[shutter release] button depressed.

• The LED next to the optical viewfinder changes from “green/red blinking”, “green blinking” to “greensteady”.

NOTE: This software and procedure automatically restores the firmware even if the firmware belongsto a wrong model code. Make sure to use the correct software for the correct mode.

6. When the LED becomes “green steady”, the firmware restoration is finished.

Remove the battery and the memory card, and then turn the power off.

7. Turn the power on again while holding [BS] and [UPPER (DISP)] depressed.

Check the model name and the program version (PR:) in the opening screen of the test menu.

++KX-829++

Ver 1.00

8. If the model name and the program version are correct, perform SYSTEM INITIAL to initialize thesystem area.

“BS + UPPER (DISP)+ PW ON” � “DOWN, DOWN, BS, MENU” � “3:ROM UPDATE” � “5:SYSTEMINITIAL”

NOTE: After SYSTEM INITIAL is performed, “SYSTEM ERROR” appears when the power is turnedon again.

9. Write the latest firmware. (Refer to page 7)

After the firmware is written, check the model name and the program version (PR:) in the openingscreen of the test menu.

10. Finally, start the camera normally to check the operation by recording, playing back and deleting animage. Check also that the colors in the images are not too bright or two dark.

— 9 —

3. To install the firmwareInitially, firmware is not installed in the PCB supplied by the parts center.Install the firmware into the PCB after replacing with a new one as shown in the procedures below.Note: The camera does not operate (only LED becomes “green blinking”) if the firmware is not installed in

the PCB.

<Writing the restoration software>

1. Copy the following software to the root directly of the SD card.

Restoration software: uranus.bin

Firmware: EX-Z11.bin

2. Insert the SD card into the camera.

3. Insert the battery while holding the [shutter release] button depressed.

The LED next to the optical viewfinder changes from “green/red blinking”, “green blinking” to “greensteady”.

4. When the LED becomes “green steady”, remove the battery and turn the power off.

<System Initialize>1. Boot the test mode.

2. Press [DOWN] twice and then press [BS], [MENU].

3. Select “3: ROM UPDATE” and then press [SET].

4. Select “5: SYSTEM INITIALIZE” and then press [SET].

5. When the following message appears, press [SET].

SYSTEM INITIALIZE

START….

PUSH OK KEY?

6. The system initialize is executed. Turn off the power when “SUCCESS!” appears.

* “SYSTEM ERROR” appears when the camera is turned off without system initialize.

<Writing the firmware>1. Turn the power on while holding [MENU] depressed.

2. When “PROGRAM UPDATE” appears, select “YES” and then press [SET].

3. “NOW LOADING” appears while the firmware is updated.

4. When “COMPLETE” appears, the firmware update is complete.

5. Turn the power on and off to check if the camera normally functions. If there is no problem, the firmwareupdate is successful.

— 10 —

ADJ TOOL

� IntroductionMake sure to perform the adjustment by the USB ADJ Tool “AdjUSB.exe” when replacing the lens unit or thePCB.Here the necessary software, driver and setting are explained to use “AdjUSB.exe”.Note that the tool, drivers etc. are available only for Windows.

1. Preparation

1-1. Prepare the necessary software, driver and DLL file.

1) Prepare the following three files.

• Testmode driver

[testmode_driver] folder uusbd.dll

uusbd.inf

uusbd.sys

* testmode_driver_2.0] is for Windows except Windows98.

* [testmode_driver] is for Windows98 only.

• ADJ tool, USB DLL and ADJ setting file

[AdjUSB] folder AdjUSB.exe (ADJ tool itself)

uusbd.dll (USB DLL)

* .adt (ADJ setting file. Sorted by models)

2) Place the testmode driver in an appropriate place.

3) Place all of ADJ tool, USB DLL and ADJ setting file in the same folder.

1-2. Set the camera so that it recognizes the USB test mode.

1) Enter the test menu.

Turn the power on while pressing both [BS] and [UPPER].

Press [DOWN], [DOWN], [BS] and [MENU].

2) Move the cursor to “2: USB TCC TEST” and press [SET].

3) Move the cursor to “1: USB TCC ON” and press [RIGHT], [RIGHT] and [SET].

4) USB TCC ON is now active. Turn the power off.

5) The test menu appears first when the camera power is turned on.

* When changing the USB TCC ON to OFF, set “2: USB TCC OFF” in the test menu.

1-3. Install the USB driver for the USB test mode in the computer.

(The following is an example using the Windows Me.)

1) Prepare the USB driver for the USB test mode.

2) Turn the camera power on which is set in the USB test mode as shown in 1-2 and let it enter the USBtest mode directly (the test menu appears right after the power is turned on).

3) Connect the camera in the above status to the computer by the USB cable.

4) The “Add new hardware” wizard appears.

5) Check “Designate the place for the driver (for users with sufficient knowledge)” and press “Next”.

6) Check “Search for the optimum driver for the device (recommended)”.

— 11 —

7) Check “Designate the place to search”, designate the place which contains “inf” file in the driver bypressing “Reference” button, and then press “Next” button.

8) When “Universal USB Driver (VMEM manufacturer’s name)” appears upon message “Searching forthe driver file for the following devices”, press “Next” button.

9) The file copy starts.

(If a message “uusbd.inf cannot be found” appears during the file copy, designate the same place asin the step 7).

10) Press “Complete” button.

11) Right-click “My computer”, select “property”, and then open “Device manager”.

If “Universal USB Driver (VMEM manufacturer’s name)”,“USB device for UUSBD” can be found, thecomputer has successfully recognized the driver.

12) Installing the test driver into either one enables the other one to recognize it.

* How to uninstall the USB driver for the USB test mode

• Connect the camera to the computer while in the USB test mode so that the computer recognizesthe camera.

• Right-click “My computer”, select “Property” and open “Device manager”.

• Select “USB device for UUSBD” , and then “Universal USB Driver (VMEM manufacturer's name)”.

• Press “Delete” button to delete the driver.

• When using Windows98/98SE/Me, delete the following three files;

(NOTE! Do NOT delete “usbd.inf” and “usbd.sys”, whose names are much alike the following.)

C:windows / inf / uusbd.inf

C:windows / system32 / drivers / uusbd.sys

• The driver has been successfully deleted.

— 12 —

2. How to use ADJ Tool when replacing Lens unitMake sure to perform the following procedure after replacing the lens.A floppy disk with the lens data is bundled in the spare parts of the lens unit.

1 Enter the TEST mode.1. Turn the power on while pressing both "BS" and "UPPER (DISP)"

buttons.2. Press "DOWN" button, "DOWN" button, "BS" button, and "MENU"

button while the program version is displayed.3. Select "2.USB TCC TEST", and press "SET" button.4. Select "1. USB TCC ON", and press "RIGHT" button, "RIGHT" button

and "SET" button.5. Turn the power OFF.

2 Connect the camera to the computer by the USB cable.3 Boot "AdjUSB" .4 Select the model name and click "Load FW � " Key.

• KX-829 EX-Z11

5 Click "ADJ ALL READ", and display the data on the "AdjUSB".6 Find the No.1163, "LCD VCOM DC".

7 Write down this value(data).8 Replace the Lens unit.9 Perform the above 1 to 3.

0 Select the model name and click "Load FW � " Key.

• KX-829 EX-Z11

A From "File/Open", open the bundled floppy disk, and transfer the data tothe "AdjUSB".

B Find the No.1163,"LCD VCOM DC"C Change the data to the former value.(Refer to 7).D Click "WRITE" button of "ADJ ALL".E After adjustment, change "1. USB TCC ON" to "2. USB TCC OFF".

6

4

A

D

— 13 —

3. How to use ADJ Tool when replacing MAIN PCB

Firmware is not installed in spare parts.

1 Enter the TEST mode.1. Turn the power on while pressing both "BS" and "UPPER (DISP)"

buttons.2. Press "DOWN" button, "DOWN" button, "BS" button and "MENU"

button while the program version is displayed.3. Select "2.USB TCC TEST", and press "SET" button.4. Select "1. USB TCC ON", and press "RIGHT" button, "RIGHT" button

and "SET" button.5. Turn the power OFF.

2 Connect the camera to the PC by the USB cable.3 Boot "AdjUSB".4 Select the model name and click "Load FW � " Key.

• KX-829 EX-Z11

5 Click "ADJ ALL READ", and display the data on the "AdjUSB".6 Save the data.7 Replace the MAIN PCB.8 Writing the Firmware.

Write the firmware into a spare part after replacing one.

NOTE: If a battery is inserted without the firmware, only LEDblinks green and the camera does not operate.

9 Perform the above 1 to 3.0 Select the model name and click "Load FW � " Key.

• KX-829 EX-Z11

A Open the file which is saved above, and display the data on the"AdjUSB".

B Click "WRITE" button of "ADJ ALL".C After adjustment, change "1. USB TCC ON" to "2. USB TCC OFF".

6

4

5

A

B

— 14 —

VCOM DC ADJUSTMENT

� PurposeReadjust the VCOM value to minimize the flicker of the LCD after replacing the LCD or the main PCB.

� Necessary tools1. Camera (Charge its battery fully)2. Photo diode (S2281-01) : See Fig 1.3. Photo sensor amp (C2719) : See Fig 2.4. BNC-BNC cable (E2573) x 2 : See Fig 3.5. 9-volt alkaline battery (6LR61Y) x 2 : See Fig 4.6. Oscilloscope

� Preparation1. The three tools can be obtained from the following global site.

Photo diode (S2281-01)Photo sensor amp (C2719)BNC-BNC cable (E2573)

www.hamamatsu.com/

2. 9-volt alkaline battery is a standard one, but can be obtained from the following global site as well.

www.panasonic.co.jp/global/

Fig1 Photo Diode (S2281-01) Fig2 Photo Sensor Amp (C2719)

Fig3 BNC-BNC Cable (E2573) Fig4 6LR61Y

— 15 —

� Procedure1. Camera setting

a) Turn the power on while pressing “BS” and “UPPER (DISP)”.After pressing “DOWN” key twice, press “BS” and “MENU”.Select "2:USB TCC TEST", and press "SET" button.Select "1:USB TCC ON", and press "RIGHT" button ,"RIGHT"button and "SET" button.Figure (a) appears.

b) Select “8 : ADJ_TEST” and then press SET.(See Figure (b).)

c) Next, select “2. LCD” and then press SET.(See Figure (c).)

2. Connecting the TOOLa) Place two 9-volt alkaline batteries in C2719.b) Connect the output terminal of C2719 to the channel terminal of the oscilloscope by the BNC-BNCcable.c) Connect the input terminal to the Photo Diode by the BNC cable.d) Turn the oscilloscope and C2719 on.

* Pull the ON/OFF switch of C2719 this way and raise/lower it. (See below Figure.)

d) Pressing SET causes the right figure to appear.(See Figure (d).)

1: ADJ STAT CLR2: LCD3: LENS . . .

1 : V C O M O K . . .

O K - > R e g i s t e r W r i t e

V C O M = 0 x c a

This value is an example and differs by products

Figure (a)

Figure (b)

Figure (c)

Figure (d)

1: VERSION INFO2: USB TCC TEST3: ROM UPDATE4: LAST MEMORY5: FORMAT6: HARD TEST7: IMAGE TEST8: ADJ TEST9: TEST SCRIPT

— 16 —

3. Measurementa) Connect S2281-01 to the camera’s LCD monitor (see below).

AC Waveforms appear on the monitor screen of the oscilloscope.* Change the Rf range of C2719 in case the range does not match.

b) After AC waveforms of the oscilloscope appear, minimize it by pressing the camera’s up/down buttons(see the picture).Make sure to visually check if it has been minimized.

Photo diodeS2281-01

LCD

CAMERABNC-BNC cable

INPUT OUTPUT

Photo sensor amp

Oscilloscope

Minimize theripple components

After it has been minimized, press SET key.The screen in the right figure appears and the new VCOM iswritten (VCOM adjustment is finished.). O K - > R e g i s t e r W r i t e

V C O M = 0 x c aA D J D A T A S E T !

This value is only an example, and differs by products.

Return to the previous display by pressing MENU or PW key.

[DOWN] button

[UPPER(DISP)] button

— 17 —

THE COUNTERMEASURE FOR "SYSTEM ERROR"

System error may occur when the battery is removed while data is written to the internal memory.

� PROCEDURE1. Initialize the system.

a) Enter the TEST mode.b) Select "3:ROM UPDATE" and press SET button.c) Next, select "5:SYSTEM INITIAL" and press SET button.d) The following message appears.

SYSTEM INITIALIZESTART ...PUSH OK KEY?

e) Press SET button and System is initialized."SUCCESS !" appears on the monitor.

2. Write firmware.Refer to the "1. To update the firmware version" on page 7.Write the firmware.If the TEST mode boots automatically, change "USB TCC ON" to "USB TCC OFF".

Replace the Main PCB if the camera does not recover.

CURRENT CONSUMPTION

(1) Current consumption (DC in = 3.80 ± 0.1 [V])• Make sure that current consumption is less than 160 mA in PLAY mode.• Make sure that current consumption is less than 270 mA in REC mode.• Make sure that current consumption is less than 250 µA when power is turned OFF.

(2) The battery indicator changes according to the voltages as follows.• DC in = less than 3.72 ± 0.02 V: (PLAY mode)

• DC in = less than 3.62 ± 0.02 V: (PLAY mode)

• DC in = less than 3.57 ± 0.02 V: (PLAY mode)

— 18 —

RESETTING THE PLACE OF DESTINATION

When the main PCB is replaced, the setting of the destination will be changed, therefore resetting is required.However, when the firmware is changed or fixed, the setting of the destination will be held, therefore resettingis not required.Use the destination setting script to change the destination flag as instructed below.

1. Have an SD card ready that have a corresponding script (autorun.scp) under the root directory.2. Insert the SD card in the camera and turn on the power.3. After a few seconds, one of the following messages will be shown in the screen.

The system will change the destination flag and turn off the camera automatically.

For North America

For North America815 • Number of menu languages: 10 languages

• eBay scene compatibleComplete

For Europe and UK

For Europe_UK• Number of menu languages: 10 languages• Movie filming time limited

Complete

For others

else• Number of menu languages: 10 languages

Complete

4. Remove the SD card from the camera and turn on the power to confirm if the camera is set as you wishincluding the number of the menu languages and the scene of the best shot mode.If there is no problem, the setting is completed.

— 19 —

DISASSEMBLY

� The Disassembly Procedure inscribed on this manual is the same as that of EX-Z11

since EX-Z11 has almost the same frame as EX-Z75.

* Make sure to use correct screws when assembling since

there are several kinds of them.

It is a good idea to sort them as shown in the right when

disassembling.

1. Remove the battery.

� Remove the side panel

2. Remove four screws and remove two side panels.

� Removing the rear case and the front case.

3. Remove 10 screws.

Side panels

Screws (S1)

Screws (S3) Screws (S3)

Screws (S2)

Screws (S2)

— 20 —

5. Removing the front case assy.

Note: Do not lose the strap and bracket.

Strap

Bracket

� Removing the lens unit

6. Release the lock and remove two FPCs.

7. Remove the microphone.

4. Removing the rear case assy.

The keypad is fixed by double-sided tape.

Keypad

— 21 —

8. Remove two hooks and remove the lens unit.

<hook locations>

� Removing the top case unit

9. Remove the hook and remove the top case unit.

— 22 —

� Removing the battery case

10. Remove one screw.

11. Unsolder two lead wires.

The speaker is fixed by double-sided tape.

Speaker

Battery case

Screws (S4)

� Removing the main PCB

12. Unsolder five lead wires.

13. Release the lock and remove three FPCs.

14. Remove one screw.

15. Remove the main PCB.

Screws (S5)

FPCs

— 23 —

� Removing key FPC

16. Remove the tape

17. Remove the key FPC.

*It is fixed by double-sided tape.

Key FPC

� Removing the LCD

18. Remove the LCD unit.


<tape locations>

— 24 —

� Removing the SW BASE

19. Remove the SW BASE.


20. Remove the hook and remove the strobe case.

21. Remove the hook and remove the strobe unit.

Strobe unit

Strobe case

— 25 —

ASSEMBLY

� Attaching the strobe unit

1. Attach the strobe unit in the ST case assy and fix it with two bottom hooks.

2. Fix it with two top hooks as well.

Note: If it is not fixed with hooks, it will become as shown below.

The top hooks not fixed � The top case cannot be set.

The bottom hooks not fixed � The battery cannot be inserted.

� Assembling the LCD

4. Set the LCD.

* Fix it with a double-sided tape.

Point

� Assembling the SW BASE

3. Set the SW BASE.


— 26 —

� Assembling key FPC

5. Set the key FPC.


Key FPC

� Assembling the main PCB

6. Set the main PCB with one screw.

7. Solder five lead wires.

8. Connect three FPCs.

Screws (S5)

FPCs

9. Tape on FPC.

— 27 —

11. Solder two lead wires.

� Assembling the battery case

10. Set the battery case with one screw.

Screws (S4)

� Assembling the top case unit

12. Set the case unit.

* Fix it with the hook.

— 28 —

� Assembling the lens unit

13. Connect two FPCs of the lens unit.

<hook locations>14. Set the lens unit.

* Fix it with two hooks.

Bracket

� Assembling the rear case and the front case

15. Set the Bracket.

16. Set the front case.

Strap

— 29 —

Screws (S3) Screws (S3)

Screws (S2)

Screws (S2)

17. Set the rear case.

18. Assemble with 10screws.

Side panels

Screws (S1)

� Assembling the side panel

19. Set two side panel.

20. Assemble with four screws.

— 30 —

EXPLODED VIEW

6

45

1

39

46

161711

19

14

35

42

12

2

47

48

S5

22

28

33

3230

29

4344

36

23

27

24

45

13

50

8

15

10

41

S2

18

38

S2

S1

S1

S3

S3

7

9S4

20

40

25

26

37

31

21

49

34

3

— 31 —

PARTS LIST1 EX-Z11_DI2 EX-Z11_CHINA3 EX-Z11_EU4 EX-Z11_UK5 EX-Z11_US

Q'TY1 2 3 4 5

N 1 10269710 PANEL ASSY/FRONT TK-RJK509705*008 1 1 1 1 1 CN 2 10267006 CAM RING RJK509578-001V01 1 1 1 1 1 AP X

3 10236128 TAPE/CR RJK508700-001V01 2 2 2 2 2 AB C4 10236080 STRAP BOARD RJK508638-001V01 1 1 1 1 1 AB X

N 5 10261712 BRACKET/L RJK509635-001V01 1 1 1 1 1 XN 6 10261714 SIDE PANEL/LA RJK509623-001V01 1 1 1 1 1 AC CN 7 10265977 SIDE PANEL/RA RJK509624-003V01 1 1 1 1 1 AC CN 8 10267092 BATTERY COVER/D RJK509630-005V01 1 1 1 1 1 AL CN 9 10225501 BRACKET ASSY/BATTERY RJK507707*001V02 1 1 1 1 1 AD X

10 10245259 KNOB/BATTERY RJK508714-001V02 1 1 1 1 1 AB C11 10200827 SPRING/BATTERY RJK507792-001V01 1 1 1 1 1 AA C

N 12 10267091 BOTTOM CASE RJK509661-003V01 1 1 1 1 1 AF C13 10192805 NET/SPEAKER RJK507483-001V01 1 1 1 1 1 AA X

N 14 10236185 SPEAKER YD1352-52 1 1 1 1 1 AH CN 15 10266215 CASE ASSY/BATTERY TK-RJK509708*005 1 1 1 1 1 C

16 10236061 LENS RING RJK508670-001V01 1 1 1 1 1 AE A *117 10248149 LENS UNIT RJK508771*002 TK 1 1 1 1 1 DX A *2

N 18 10248008 CUSHION/LENS RJK509140-001V02 3 3 3 3 3 AA CN 19 10260413 TAPE/EMI RJK509577-001V01 1 1 1 1 1 AB C

20 10236149 MIC OBG415L42C2-R815 1 1 1 1 1 AH CN 21 10266041 TAPE/PCB RJK509657-001V01 1 1 1 1 1 AB CN 22 10266205 PCB ASSY/MAIN TK-RJK509798*001 1 1 1 1 1 AN 23 10266034 CUSHION/ST RJK509645-001V01 1 1 1 1 1 AB XN 24 10266043 STROBE UNIT XEST-K827-S 1 1 1 1 1 BV CN 25 10236150 TAPE/ST RJK508723-001V01 1 1 1 1 1 AB XN 26 10266202 CASE ASSY/STROBE TK-RJK509707*001 1 1 1 1 1 C

27 10200800 SPRING/PUSH/BATTERY RJK507791-001V01 1 1 1 1 1 AA C28 10236144 TAPE/SW RJK508706-001V01 1 1 1 1 1 AB X29 10236143 SW BASE RJK508690-001V01 1 1 1 1 1 AB X30 10236155 CUSHION/SHUTTER RJK508936-001V01 2 2 2 2 2 AA C31 10236201 BUTTON/SHUTTER RJK508678-001V01 1 1 1 1 1 AG C32 10236200 BUTTON/PW RJK508677-001V01 1 1 1 1 1 AF C33 10253575 TOP CASE RJK508676-005V02 1 1 1 1 1 AI C

N 34 10266028 TAPE/STRAP RJK509641-001V01 1 1 1 1 1 AB C35 10236146 TAPE/CCD RJK508716-001V01 1 1 1 1 1 AB C

N 36 10261711 FRAME ASSY/BATTERY RJK509637*001V01 1 1 1 1 1 CN 37 10266033 PLATE/LCD RJK509655-001V01 1 1 1 1 1 AB CN 38 10266031 TAPE/LCD RJK509649-001V01 2 2 2 2 2 CN 39 10266204 LCD ASSY TK-RJK509710*001 1 1 1 1 1 AN 40 10266039 TAPE/FPC/A RJK509652-001V01 1 1 1 1 1 AB CN 41 10266029 TAPE/FPC/B RJK509893-001V01 1 1 1 1 1 AB CN 42 10266030 TAPE/FPC/C RJK509894-001V01 1 1 1 1 1 AB CN 43 10266040 TAPE/FPC RJK509653-001V01 1 1 1 1 1 AB CN 44 10266027 KEY/FPC SB-CAS9-A 1 1 1 1 1 C

45 10113024 SEAL/DETECTION RJK504361-001V01 1 1 1 1 1 AA C

N: New parts*1: Not included in the Lens unit.*2: Floppy disk is bundled.

Specification PriceCode

R RemarkN I tem Code No. Parts Name

— 32 —

1 EX-Z11_DI2 EX-Z11_CHINA3 EX-Z11_EU4 EX-Z11_UK5 EX-Z11_US

Q'TY1 2 3 4 5

N 46 10266218 PANEL ASSY/REAR TK-RJK509706*005 1 1 1 1 1 CN 47 10266004 KEY/PAD SA-CAS10-D 1 1 1 1 1 CN 48 10266018 TAPE/KEY/A RJK509647-001V01 1 1 1 1 1 AB CN 49 10266019 TAPE/KEY/B RJK509648-001V01 1 1 1 1 1 AB CN 50 10269711 LABEL/RATING/DCB RJK509632-041V01 1 1 AK C For EUN 50 10269712 LABEL/RATING/DFB RJK509632-042V01 1 1 AK C For DIN 50 10273875 LABEL/RATING/DAB RJK509632-045V01 1 C For US

S1 10190516 SCREW RJK502836-007V01 4 4 4 4 4 AA CS2 10240566 SCREW RJK508552-003V01 6 6 6 6 6 AA C

N S3 10265950 SCREW RJK509626-001V01 4 4 4 4 4 AA CS4 10081372 SCREW RJK502836-001V01 1 1 1 1 1 AA CS5 10153233 SCREW RJK506113-001V01 1 1 1 1 1 AA C

FU100 10196218 FUSE FCC10801ABPA 1 1 1 1 1 AA BFU101 10137134 FUSE FHC10252ABPA 1 1 1 1 1 AA B

ACCESSORIESN - 10263707 AV CABLE AV-K827-BK15 1 1 1 1 1 AQ C

- 10233074 AC CORD CBL-K835-AC-CH-06 1 AJ C Chine type- 10210351 AC CORD CBL-K835-AC-EU-06 1 1 AF C EU type- 10210360 AC CORD CBL-K835-AC-TW-06 1 AF C Blade type- 10210354 AC CORD CBL-K835-AC-UK-06 1 AR C UK type- 10212585 AC CORD CBL-K831-AC-US-2 1 AH C US type- 10244922 BATTERY/LI-ION MK11-2855 1 1 1 CL B

N - 10266901 BATTERY/LI-ION MK11-2855-C-S 1 BX B China only- 10251924 BATTERY/LI-ION MK11-2855-U-S 1 CL B US only- 10233026 CHARGER R68-8207 1 1 1 1 1 BR C- 10187367 STRAP ST-K872-S 1 1 1 1 1 AB X

N - 10263706 USB CABLE UC-K827-BK10 1 1 1 1 1 AO CN - 10266908 CD ROM CK829DBA01R 1 1 1 AP C For US/DIN - 10266909 CD ROM CK829DCA01R 1 1 AM C For EU/UK

N: New parts

Specification PriceCode

R RemarkN I tem Code No. Parts Name

— 33 —

PRINTED CIRCUIT BOARD

MAIN PCB (TOP VIEW)

FU101

FU100

— 34 —

MAIN PCB (BOTTOM VIEW)

CASIO COMPUTER CO.,LTD.Overseas Service Division

6-2, Hon-machi 1-ChomeShibuya-ku, Tokyo 151-8543, Japan

Ver.1 : Mar. 2007

• Correction of the RESETTING THE PLACE OF DESTINATION. (P18)

EXZ11

Documents

Transcript of EXZ11