Ext. PSU SPECIFICATION FOR APPROVAL · A2 13.10.23...

Ideal Power LtdIdeal Power, Ideal House, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, EX32 7NZ, England, UK Tel: +44 (0) 845 260 3400 Email: [email protected] Web: www.idealpower.co.uk

Ideal Power Ltd Product Specification Document

I.T.E POWER SUPPLY

110370-0317 FEB.18th.2014

(A3)

HK-AJ-090A200-CP HKSC-110370

VENDOR APPROVED SIGNATURES

DATE:

CUSTOMER APPROVED SIGNATURES

PART NO:

SPECIFICATION FOR APPROVAL

DESIGNED NO:

MODEL NO:

DESCRIPTION:

CUSTOMER:

REV:

繪圖員2014.02.18

何寶玲

工程師2014.02.18歐陽建瓊

經理2014.02.18田青松

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZ

Web: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401

Description Ext. PSU

Model Number 25HK-AJ-090A200-CP

Revision A3

Notes -


SAFETY APPROVAL:ENGINEER APPROVAL:

ELECTRICAL STRUCTURAL

MODEL NO REV

PART NO

REMARKSDESCRIPTION

SPECIFICATION CHANGE HISTORY

QR-工-26A

REV DATE

CUSTOMER HKSC-110370

HK-AJ-090A200-CP (A3)

歐陽建瓊胡鵬張偉松

Ideal Power

馮丹3.將 C-TICK 改為 RCM, (Label change C-Tick to RCM)2.更新FCC Logo (Update new FCC logo)1.更新新的IP logo（Update the new logo ）.

13.10.21A1

13.10.23A2 2.銘板增加PSE安規,承認書第15項增加PSE安規信息

(Add Individual Cartons Label 1: 1.在白盒上蓋加印客戶P/N 和 RoHSP/N: 25HK-AJ-090A200-CP & also the RoHS label)

Add the PSE logo on the label and information under Point 15.0 SAFETY3.更新8 pin 連接器圖片 (Update the 8 way connector)

馮丹

14.02.18A31.更新EMC標準和加法文警告標語.(update EMC standard and French warning words)2.更新銘板上的安規logo.(Update the safety logo on the label)3.更新8 pin 連接器圖片.(Update the 8 way connector)

何寶玲

Page 2 of 13


11. PROTECTION10. INSULATION RESISTANCE9. DIELECTRIC STRENGTH (Hi-Pot) TEST

14. RELIABILITY AND QUALITY CONTROL15. SAFETY16. OVERALL DRAWING

19. MARKING18. PACKING

12. ENVIRONMENTAL CONDITIONS13. EMI/ EMC

1. INTRODUCTION2. INPUT REQUIREMENTS

5. LINE REGULATION6.HOLD UP TIME7.TURN ON TIME8.TEMPERATURE COEFFICIENT

3. OUTPUT REQUIREMENTS4. EFFICIENCY

DESCRIPTION : I.T.E POWER SUPPLY

MODEL NO. :PART NO. :

CONTENTS

2014.02.18REV: (A3)

PAGE NO. : ISSUED DATE:

17. USE SPECIFICATION

1 OF 12HKSC-110370

HK-AJ-090A200-CP

20. TEST REPORT

Web: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401 Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZ

Page 3 of 13


2.2 Input Frequency Range: 47 Hz to 63 Hz 2.1 Input Voltage Range: 100(-10%)VAC to 240(+10%)VAC

This document specifies a switching power supply with a output of +9V, and electronic process. The switching power supply will provide power for technology equipments including electrical business equipment.The adaptor meets the requirement of lead free and RoHS.

PAGE NO. :

REV: (A3)ISSUED DATE:

3.3 Output Load Range: 2.0A

2.4 Input In-rush Current: 50A Max

2.5 Input Current: 0.8A Max

3.2 Output Regulation:

3.1 Output Voltage: 3.0 OUTPUT REQUIREMENTS

+9V

8.55-9.45V

2.0 INPUT REQUIREMENTS

PART NO. : MODEL NO. :


1.0 INTRODUCTION

2014.02.182 OF 12HK-AJ-090A200-CP

HKSC-110370

2.3 Input Power Consumption at no-load : 0.3W Max

≧80.40%

3.4 Output Ripple & Noise: 200mV Max @20MHz bandwidth with

7.0 TURN ON TIME: 2S Max at 110VAC full load.

10UF/50V capacitance and 104/50V ceramic capacitor.

4.0 EFFICIENCY: @ average of 25/50/75/100% loads &115/230VAC input

6.0 HOLD UP TIME: 10ms Min at 110VAC full load.

5.0 LINE REGULATION: ±2% maximum


Page 4 of 13


overload shall provide automatic recovery for the output voltage.

11.2.2 Short Circuit Protection: Auto Recovery.

11.2 Output Protection

11.2.1 Output Current:

The switching power supply has a 2 Amps inner current fuse to protect itself.

9.2 Finished product withstands AC 3.0KV, for 2 second, 4mA Max primary to

9.1 Finished product withstands AC 3.0KV, for 2 second, 4mA Max primary to

PAGE NO. :

REV: (A3)ISSUED DATE:

secondary.

11.1 Input Protection

11.0 PROTECTION

10.0 INSULATION RESISTANCE

9.0 DIELECTRIC STRENGTH (Hi-Pot) TEST

Primary to secondary: 50M OHM to 500VDC.

8.0 TEMPERATURE COEFFICIENT: 0.05%/°C

MODEL NO. :PART NO. :DESCRIPTION : I.T.E POWER SUPPLY

2014.02.18

case.

3 OF 12HK-AJ-090A200-CP

HKSC-110370

Overload conditions shall decrease the output voltage Removal of an

output


Page 5 of 13


The burn-in test will be performed at least 2 hours at 40 centigrade degrees

When the operation is compling with this specification, the switching power supply s MTBF will be 50,000 hours at 25 centigrade degrees.

The switching power supply can withstand the following environmental conditions:

ISSUED DATE:REV: (A3)

PAGE NO. :

14.1 Burn-in

under full load condition. 14.2 MTBF

15.0 SAFETY

13.0 EMI / EMC

Relative Humidity: 10% ~ 95%

Relative Humidity: 10%~95%

12.1 Storage Temperature:-20℃ ~ +70 ℃

12.2 Operation

14.0 RELIABILITY AND QUALITY CONTROL

Temperature:0°C~40°C

12.0 ENVIRONMENTAL CONDITIONS

DESCRIPTION : I.T.E POWER SUPPLYPART NO. : MODEL NO. :

2014.02.184 OF 12HK-AJ-090A200-CP

HKSC-110370

(1)EN55022(EN61000-3-2. EN61000-3-3) FCC PART 15B

IEC61000-4-6. IEC61000-4-8. IEC61000-4-11.) (2)EN55024(IEC61000-4-2. IEC61000-4-3. IEC61000-4-4. IEC61000-4-5.

The switching power supply has approved by the following standards:

The switching power supply has approved by the following safety standards: UL60950-1 2nd Edition ,2007-03-27 CSA C22.2 NO.60950-1-07,2nd Edition.2007-03 EN60950-1: 2006+A11+A1+A12AS/NZS 60950-1:2003 inc amendment1,2&3. BS EN60950-1: 2006+A1+A12

AS/NZS 55022/55024


J55022(H22)

Page 6 of 13


UNIT: mm


16. OVERALL DRAWING


REV: (A3)2014.02.18

PAGE NO. :ISSUED DATE:

5 OF 12HK-AJ-090A200-CP

HKSC-110370

Small ODSafety Marking

88.5±1

46.0±136.0±1

35-J不加強筋

4.9±0.3

10.5±0.5

8.1±0.3

1.5*31.6

TIP 27

.3±0

.2

10±0.5

16.8

±0.5 2.1±

0.2

1.2*3

未注標尺寸公差:±0.2

可換頭

1830±30

(印安規字) (白條邊)

TIP

TIP

AWG#20


Page 7 of 13


REV: (A3)

PAGE NO. : ISSUED DATE:


2014.02.186 OF 12HK-AJ-090A200-CP

HKSC-110370

HK-04N20286

2.5A 250V~

HK-03

2.5A 250V~EN 60320-1

HON-KWANG

2.5A250V~HK-02

HON-KWANG

A 46

B2.5A125V~E246753HK-01

ESP

46.0±1

88.5±1

88.5±1

46.0±1

36.0±1

36.0±1

36.0±1

36.0±1

UNIT: mmUNIT: mm

UL TUV

UK SAA


Page 8 of 13


HKSC-110370

HK-AJ-090A200-CP 7 OF 122014.02.18


ISSUED DATE:REV: (A3)

PAGE NO. :


8.1±0.3

TIP

TIP

TIP

TIP 27

.3±0

.2

27.3

±0.2

TIP

TIP 27

.3±0

.2

TIP 27

.3±0

.2

TIP

8.1±0.38.1±0.38.1±0.3

10±0.5

8.1±0.3

27.3

±0.2

TIP

UNIT: mmUNIT: mm

Page 9 of 13




REV: (A3)2014.02.18

PAGE NO. :ISSUED DATE:

17. USE SPECIFICATION

8 OF 12HK-AJ-090A200-CP

HKSC-110370

Please don't insert article alone at the wall.

WARNING!TI

PT

IP

TIP

TIP


∅1.7

∅4.0∅4.75

∅1.7 ∅1.3

∅3.4

∅2.5

∅5.5 ∅5.5

∅2.1

∅5.5

∅2.1

∅6.3

∅3.0 ∅0.7

∅2.35

TIP

TIP

TIP

TIP

Instruction manual card

Page 10 of 13


2014.02.18REV: (A3)

18.1 Inner BoxUNIT: mm


MODEL NO. :

18. PACKING

PART NO. :PAGE NO. :ISSUED DATE:

9 OF 12HK-AJ-090A200-CP

HKSC-110370

注意:樣品使用的小白盒尺寸可能與此圖面尺寸不同,此圖面尺寸是用于生產時的包裝.

NOTICE:Its probably different from the white box of the sample and the figure dimension. The white box is used to pack during product.

Length: 143

Height: 60

Width: 70


6

24

P/N:25HK-AJ-090A200-CP

Label: 1Label: 2

Width

Length

Height

Open Side

印刷于此

Material:A卡400磅(0.53t)White

6

24

RoHS

Label: 2

Label: 1

Page 11 of 13


18.2 Carton

UNIT: mm

100V~240V

200V~240V

100V~120V

MODEL:

N.W.:

G.W.:

Q'TY: 60PCS

100V~120V

100V~240V

200V~240V


MODEL NO. :

18. PACKING

PART NO. :PAGE NO. :ISSUED DATE:REV: (A3)

2014.02.1810 OF 12HK-AJ-090A200-CP

HKSC-110370

(Transverse Plane)

440

250

360


Page 12 of 13


19. MARKING

UNIT: mm



PAGE NO. :

REV: (A3)ISSUED DATE: 2014.02.18

11 OF 12HK-AJ-090A200-CP

HKSC-110370

year

M M Y Y C

month

made in China by Hon-kwang


200# CPC 合成紙+上光 NAME-PLATE:WHITE CHARACTERS BLACK BACKGROUND.

ĽINTÉRIEUR SEULEMENTPOUR UTILISATION À ATTENTION

ID 0000019930

Sicherheitgeprufte

TUVRheinlandR

www.tuv.com

I.T.E POWER SUPPLY

LPS

R2.0

INPUTOUTPUT

MODEL

60YM E202402

: 100-240V 50/60Hz 0.8A: 9V 2.0A

: HK-AJ-090A200-CP

31.8+0.0-0.2

BS EN 60950-1TUVRheinland Group

19.8+0.0-0.2

2.5

2.5 MADE IN CHINA MMYYC

P SE

入力:

JET9V 2.0A出力:100V 50/60Hz 0.8A 41VA

輸入事業者

Page 13 of 13

Ext. PSU SPECIFICATION FOR APPROVAL · A2 13.10.23...

Documents

Transcript of Ext. PSU SPECIFICATION FOR APPROVAL · A2 13.10.23...