5

Expectations are always high if the launch edition of a trade event is a big success.

The regional industry is awaiting an encore as the second Plastivision Arabia and Arabia Mold are under way at Expo Centre Sharjah.

Both the shows had an impressive launch in 2012, registering record number of pre-registered visitors, excellent exhibitor response, good visitor turnout and extensive media coverage.

It also had the distinction of seeing most live machines on display sold.Now, curtains have gone up for the 2nd Plastivision Arabia, which, as in the launch edition, is being organized jointly by Expo Centre Sharjah and All India Plastics Manufacturers Association.

The international trade fair for moldmaking, tooling, design and application development, the 2nd Arabia Mold is being held along with Plastivision Arabia, in association with DEMAT, the organizer of world-renowned EuroMold trade show.

Besides, Plastivision Arabia is playing host to the International Conference for Plastics Conversion (PlastCon 2014), in association with the Gulf Petrochemicals and Chemicals Association (GPCA).

It is the first time Expo Centre Sharjah is hosting PlastCon, which is now into its fifth edition. PlastCon is focusing on the Gulf polymer industry, offering a great opportunity for trade representatives to gain insights into the main challenges and developments facing plastic conversion.The GPCA is also presenting the Plastics Excellence Awards 2014, recognising excellence and ideas in plastic products, recycling, manufacturing processes and their sustainability.

With regional plastics consumption projected to see a massive surge as preparations pick up pace for World Expo 2020 and the Fifa World Cup 2022, plastics producers will have to look at acquiring new machinery and technology to keep pace with the expected surge in demand.

Together, Plastivision Arabia, Arabia Mold and PlastCon will be a comprehensive sourcing as well as networking platform for the entire regional plastics and mold-making industry.

I am sure the show will be helpful to every visitor given the range of products and equipment on display and sale.I wish all the very best.

FROM THE CHAIRMAN’S DESK...

Ahmed Mohammed Al-MidfaChairman - Sharjah Chamber of Commerce & Industryand Expo Centre Sharjah

Message

6

It is a matter of great pride to present before you the second Plastivision Arabia and Arabia Mold trade shows.

Held once in two years, the twin shows have been much anticipated since their launch in 2012 had left a great impression in the regional industry.

Featuring nearly 150 exhibitors from across the world, the shows will be a comprehensive sourcing point for key segments of the plastics and mold making industries.

Visitors will be able to find leading raw material producers, primary processing and auxiliary equipment suppliers from the region as well as across the world, offering a diverse range of products under a single roof.

Visitors will have direct access to major industry players from China, Egypt, Germany, India, Iran, Italy, Korea, Morocco, Portugal, Sweden, Taiwan, Turkey, the UAE, the UK and the US.The shows will offer an unrivalled opportunity to strike sourcing deals, and share technology know-how and all the latest developments in processing and manufacturing of products.

Arabia Mold is showcasing mold making technology, tool & die, tool steels, machine tools, prototyping, 3D printing and other related technology. mold-making tools, filtration instruments, welding equipment, cooling systems and other related industrial machines and accessories.Plastivision Arabia is also featuring a ‘Business Opportunity Pavilion’, ‘Consultation Counters’, and a ‘Recruitment Pavilion’, offering complete manpower & training solutions, industry information and business leads to regional companies.

Besides, for the first time, we have tied up with Gulf Petrochemicals and Chemicals Association to host the International Conference for Plastics Conversion (PlastCon 2014).

The event is perfectly positioned to take advantage of a growing economy and the unique benefits of availability of abundant raw materials and low feedstock prices in the region.

It will be the most comprehensive event of its kind in the region that can offer high-tech, cost-effective and an extensive range of products and equipment.

I am sure the show will build on its splendid launch and will work towards the benefit of the regional industry.I wish you a fruitful visit.

Mr. SAIF MOHAMMED AL MIDFACEO, Expo Centre Sharjah

DIRECTOR GENERAL OF EXPO CENTRE SHARJAH

Message

7

AIPMA is a 67 years old largest Apex Body in the Plastics Industry in India, which has expanded in all fields of Plastics. AIPMA has more than 2500 members directly and over 22000 through its 27 affiliated associations spread over to more than 175 cities in India.

AIPMA organizes National as well as International Exhibitions, Seminars, Lecture Meetings, Conferences, Buyer & Seller Meet, Training Programs periodically and Liaison between the Government and the Industry.

Plastivision India has been AIPMA’s trade show since 1992. With 12,000 exhibitors and 110,000 visitors from 30 countries, spread over 75,000 square meters, Plastivision India has grown to be among the world’s top 10 plastic trade shows.

So we decided to bring the show closer to customers, starting with UAE.The Sharjah Chamber of Commerce and Industry and AIPMA share similar values, prioritizing promotion of trade and industry over short-term profits.

To promote Indian Plastics Industry internationally, AIPMA co organizes International trade fair “Plastivision Arabia” since 2012 at Sharjah Expo Centre, UAE.PLASTIVISION ARABIA 2014 is endorsed and supported by Govt. of India - Ministry of Chemicals & Fertilizers.

We are impressed with the infrastructure and professional management of Expo Centre Sharjah. We saw the culture of Sharjah, where books are valued, where modern amenities and traditional values meet. The Emirate is strong in industry. We saw this as a meeting place for B2B industrial network from GCC countries, Africa and Asia.

Government in GCC countries are focusing on value addition, from oil economy to polymers and plastic products, India is willing to support this transition with its industry – the manpower, machine and molds.

My best wishes to Plastivision Arabia 2014.

FROM THE PRESIDENT, AIPMA

Anand OzaPresident, AIPMA

Message

8

Borouge is proud to sponsor the second edition of Plastivision Arabia 2014 Conference and Exhibition and is pleased to welcome all the exhibitors and the visitors to this premium trade show.

Borouge is a leading provider of innovative, value creating plastics solutions. A joint venture between the Abu Dhabi National Oil Company (ADNOC), one of the world’s major oil and gas companies, and Austria based Borealis, a leading provider of chemical and innovative plastics solutions, Borouge is a groundbreaking international partnership at the forefront of the next generation of plastics innovation.

With its base in the United Arab Emirates and Marketing & Sales head office in Singapore, Borouge employs more than 3,000 people representing over 40 nationalities and serves customers in 50 countries across the Middle East, Asia and Africa.

Building on the unique Borstar® and Borlink™ technologies and over 50 years of experience in polyolefins, Borouge provides innovative, sustainable and value creating plastics solutions for infrastructure (pipe systems, and power and communication cables), automotive and advanced packaging applications that address global challenges such as climate change, food protection, access to fresh water, energy conservation, healthcare and waste management.

In 2010 Borouge tripled the annual production capacity of its plant in Abu Dhabi to 2 million tonnes, and with further expansion to 4.5 million tonnes in 2014, Borouge and Borealis will have a combined annual production capacity of approximately 8 million tonnes of polyethylene and polypropylene.

Borouge is expanding its commercial and logistics network in the Middle East and Asia and investing in its Innovation Centre in Abu Dhabi and R&D Application Centre in Shanghai. Focused on our company mission, Value Creation through Innovation, we ensure that our customers throughout the value chain, around the world, can rely on differentiated products and reliability of supply.

We are pleased to have the opportunity to meet up with our customers and partners here at Plastivision Arabia 2014.We look forward to having the chance to listen to your needs.

FROM THE SENIOR VICE PRESIDENT MIDDLE EAST AFRICA (MEAE) - BOROUGE

Hazeem Sultan Al SuwaidiSenior Vice President Middle East Africa (MEAE)

Message

9

Symbiosis For Growth

Thank you for being part of PlastiVision Arabia show.

India & Arabia region share long history of business & culture. They are largest trade partners.Arabia has largest reserves of oil & major refineries to convert oil to polymers. GCC countries are also now emerging as major plastic processing hub. GCC per capita consumption is 25 kg & growing fast. India has a very thriving plastic industry.

India makes polymers , plastic processing machines , moulds , have 50000 plastic processors & huge domestic market. India also has worlds largest trained work force. So in some way both these regions can compete & in others they can collaborate.

Such symbiosis can bring prosperity to industry & people of both great economies. In globalized economy such strategies will help both to compete against much advanced industrial economies.

The All India Plastic Manufacturers Association (AIPMA ) has been organizing PlastiVision India for 27 years. One show every 3 years. PlastiVision India 2013 is now amongst top 5 global plastic shows. PlastiVision Arabia has evolved out of mutual cooperation between AIPMA & Sharjah Chamber of Commerce & Industry. The first edition of PlastiVision Arabia saw 159 exhibitors from 19 countries covering 10000 sq meter & 7000 visitors from 66 countries. All live machines on display were sold out.

Sharjah Expo Center has most modern infrastructure & is professionally managed. It made the show happen smoothly for exhibitors & visitors. This time event has grown substantially, with Print Pack Arabia , GPCA Conference & Arabia mould show as concurrent event. All concurrent events are chosen carefully to complete value chain of all stakeholders.

GPCA brings polymer makers , PlastiVision Arabia brings machine makers & processors , Arabia Mould show brings mould makers & Print Pack Arabia brings packaging sector together. There are several innovations we have embedded in the show to add value for visitors. Placement cell will capture manpower requirement from visitors & will connect them to suitable talent. Consultants clinic will bring experienced entrepreneurs giving free advise to visitors on technical & business issues.

Opportunity Pavilion will showcase plastic products requirement from GCC countries visitors can quote for.

FROM THE CHAIRMAN, PLASTIVISION ARABIA 2014

Message

10

This is only show where visitors can also go back home gaining business. Solar Pavilion will showcase how solar power can be harnessed to reduce carbon footprint of plastic industry.

Plastic in Healthcare pavilion will showcase use of plastic in pharma & healthcare industry. Green pavilion will showcase how plastic helps save environment. All of 3 pavilions above reflect that Plastic industry is aware of environment concerns & actively working towards providing solutions.

Such contribution towards industry progress is unique to PlastiVision Arabia. As both partners AIPMA & Expo center are focused on growth of economy & industry. Society of Plastic Engineers from USA has joined the show. It has good knowledge base for technology resources for professionals. Central Institute of Plastic Industry & Technology ( CIPET ) is also exhibitor, has received invitation to open a training institute in UAE.

Polymer processing is giving rise to SME sector & generates employment opportunities. Such Inclusive growth leads to better stability in region.

PlastiVision Arabia has already grown to be 3rd largest plastic show in GCC & African countries.It is strongly placed to claim top slot in years to come.

We do hope you meet your objectives when you exhibit or visit the show.

Go slowly through the show. Every exhibitor has new opportunity to share.

May the Growth be with you.

Jayesh Khimji RambhiaChairman PlastiVision Arabia

11

I would like to take this opportunity to welcome you to PlastiVision Arabia 2014 and to introduce GPCA PlastiCon 2014.

This year we have co-located our event with the PlastiVision Arabia exhibition at the Expo Centre, Sharjah. We have a choice of two seminars on 7th April (Opportunities with Plastic Pipes and Products Improvements through Masterbatches) and a conference agenda full of industry experts which should stimulate debate for all delegates.

A key feature in our annual gathering is the Plastics Excellence Awards, and in 2014 we have had yet another exciting year of entries. Presentation of the awards will take place at the Gala Dinner hosted by SABIC, on 8th April. As well as hearing about the entries and the winners, we will have a dynamic speech by Jim Trainham, Vice President and Distinguished Fellow of the Research Triangle Institute.

This year we have decided to showcase the use of recycled plastic throughout our conference merchandise. Both the pen and the USB are made from recycled plastic, and the conference bag is PET material from recycled plastic bottles. We also incorporated plastic resin pellets into our uniquely designed speaker gift and I would like to thank Astra Polymers for donating them.

Many of our sponsors are taking stands at the PlastiVision Arabia Exhibition so do take the time to visit them.

If you would like more information on attending any part of the conference, please do speak to a member of the GPCA onsite team who will be happy to assist you.

I believe that this year will be the best GPCA PlastiCon event to date, and I hope you have a productive time at PlastiVision Arabia.

Yours sincerely,

FROM THE SECERETARY GENERAL GPCA

Dr Abdulwahab Al-SadounSECERETARY GENERAL

Message

International Plastics News – Middle East & Africa print magazines, digital e-magazines, and fully interactive magazine Apps with video links on iTunes and Google Play facilitate technology transfer by providing readers in English (with highlights in Chinese) with industry news and trends.

International Plastics News – Middle East & Africa has established itself as a leading source of exclusive content and technical articles prepared and written by a team of editorial and industry experts from Ringier Trade Media.

To learn how to get more high quality sales leads, please contact:Toll Free Hotline: 800-820-0083 (within Mainland China) 800-1122-8811 (outside of Mainland China)

Mr. Mike Hay, PresidentT e l : +852 2369 8788 Ext 11Email: mchhay@ringier.com.hk

• Language: English • Total Readership: 18,860 • Frequency: 6x a year

Digital Editions include embedded videos and interviews from trade shows and factory visits.

Anytime, Anywhere on ANY device

Scan this QR code to download our APP

Reach the World’s Fastest Growing Market for the Plastics Industry

plastics.industrysourcing.com

2014GPCAPlastiCon5th International Conference for Plastic Conversion

7-9 April 2014, Expo Centre Sharjah

Exploring Growth Through Innovation in the Plastic Conversion Industry

Co-organized by:

Are you a plastic converter? Join us by simply visiting the GPCA PlastiCon registration desk and secure your

access to the leading conference for plastic conversion in the Middle East.

Sponsors:

Media Partners:

Here are some of the industry experts exploring different aspects of innovation in plastic conversion at the 2014 conference in Sharjah:

Dr. Raed AlZubi Executive President PETROCHEMICAL CONVERSION COMPANY (PCC)

Dr. Cristina M Acevedo Global Product Line Manager MILLIKEN

Pierre Belloir Infrastructure and Construction Technical Manager TOTAL

Claudia HaugManager Technical Customer Service,EMEAGRACE

Rainer Kottmeier Managing DirectorBATTENFELD-CINCINNATI GERMANY GMBH

Willem De VosCEOSOCIETY OF PLASTICS ENGINEERS

Hery Randrianantoandro Segment Leader HealthcareSBU POLYMERS – SABIC EUROPE

Mohammad A. Alazzaz Manager, Value Parks Department SADARA CHEMICAL COMPANY

16

Expo Centre SharjahSuccess Starts Here

Expo Centre Sharjah, the exhibitions organisation of the SharjahChamber of Commerce and Industry, is the pioneer of the trade fair industry in the Arabian Gulf region and the largest exhibition organiser inthe UAE. Through a sophisticated line up of industry, solo country and consumer shows, Expo Centre Sharjah brings you in touch with the latest developments and business opportunities in your industry.

The Middle East’s technically most advanced centreToday, Expo Centre owns and operates the most technically advanced exhibition complex in the Middle East with such cutting-edge features such as wireless data and internet connectivity, an online lead retrieval system, and a turnstile-controlled registration for visitors, all firsts in the Middle East region. It offers the perfect combination of advanced technical facilities and professional services across a broad spectrum of events.

Designed to maximise functionality and flexibility, the Centre covers a total ground area of 128,000 sq. metres. Visually exciting, with its picturesque water-front setting bordering Sharjah’s Al Khalid lagoon, the complex has been meticulously planned with easy access routes and a parking space for over 1600 vehicles, to meet the complete requirements of its participants.20,000 sq. m. of highly functional exhibiting space

Message

17

Message

For further details, please contactExpo Centre SharjahP.O.Box: 3222, Sharjah, U.A.E.

Tel: (+971-6) 5770000 Fax: (+971-6) 5770111info@expo-centre.ae • www.expo-centre.ae

The Centre has 20,000 sq. m. of highly functional, column free, exhibition space (comprising four exhibition halls, 4,000 sq. m. each, a central boulevard and wide ranging facilities) and 6,000 sq. m. of equally functional out door space (comprising two blocks - one 4000 sq. m. area facing Al Taawun square and a 2000 sq. m. area adjacent to the lagoon).

The halls and out-door exhibiting sites have been specifically designed for easy move-in and move-out of goods, vehicles and exhibits, ensuring a smooth traffic flow at all times.

1,300 sq. m. of exceptional conferencing spaceThe Centre also offers 1,300 square metres of exceptional meeting and conferencing space, consisting of six multi-functional rooms (two of which can be partitioned and shaped to suit any capacity ranging from 20 to 500 participants). Equipped with high tech audio, visual, theatrical and lighting equipment, they are an ideal setting for conventions, meetings, incentives, launches, and other special events. The centre also has plush, exclusive facilities for receiving high-ranking, V.I.P. delegations.

Equipped with a full spectrum of exhibition facilities & servicesThe new centre is fully equipped with a full spectrum of exhibition facilities and services to ensure that your visit is a seamless, efficient and fully integrated process from start to finish.

18

Dates : 7 to 10 April, 2014

Timings : 10 am to 6 pm.

Location : Expo Centre Sharjah

(Opposite Al Taawun Mall)

Only 18 km from Sharjah

International Airport and

10 km from Dubai International

Airport.

Access routes to Expo Centre Sharjah

Visitors’ Guide

19

EXHIBITOR LISTING INDEX

20

A TO Z PACKAGINGS ...........................................................................................................25ACE HEAT TECH ....................................................................................................................25AL FALEH PP WOVEN BAGS IND. LLC ................................................................................26AL MAHIR PRINTING EQUIPMENTS TRDG.........................................................................26AL NOOR PLASTIC FACTORY ..............................................................................................27AL SANABEL CONVERTING .................................................................................................27ARTI CHEMICAL INDUSTRIES ...............................................................................................28 ASHISH TOOLS PVT LTD ......................................................................................................28ASP SEALING PRODUCTS LTD ............................................................................................29ASTRA POLYMER COMPOUNDING CO.LTD. ....................................................................30BJS ENGINEERS .......................................................................................................................31BMC GULF TRADING AND CONTRACTING LLC ..............................................................32BRANDS ADVERTISING LLC .................................................................................................33CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY (CIPET) ............34BOROUGE UAE ..................................................................................................................35DEASUNG EXT KOREA SOUTH .......................................................................................35DEESHA IMPEX .......................................................................................................................36DGCX UAE .........................................................................................................................37DHWANI POLYPRINTS PVT. LTD. ......................................................................................37DR. TRADE POINT / GIRIVARYA NONWOVEN FABRIC PVT. LTD. ...............................38DWJ MASTERBATCHES COMPANY LIMITED......................................................................38ELAN INTERNATIONAL .....................................................................................................39EPI ENVIRONMENTAL PRODUCTS INC. ............................................................................40ESMA - EMIRATES STANDARDIZATION & METHODOLOGY AUTHORITY. .................41EXPERT INDUSTRIES PVT. LTD. ...........................................................................................41FAV PLASTICO PVT. LIMITED ...............................................................................................42FIELDKING POLYMERS ..........................................................................................................42GATRONOVA/KRYSTOFILMS ................................................................................................43GIRIVARYA NONWOVEN FABRIC PVT. LTD. .....................................................................43GPCA .......................................................................................................................................44GRACE GMBH & CO. KG .......................................................................................................44GURUCHARAN INDUSTRIES ...............................................................................................45HIGHGATE PLASTIC FACTORY .........................................................................................46HILDA AUTOMATION ...........................................................................................................46ICIS ...........................................................................................................................................47INTERNATIONAL DATABASE AND DIRECTORY SERVICES FZC (IDDS) LTD ................47IFRIQUIA PLASTIC ..................................................................................................................48INTERNATIONAL MARKETING CORPORATION .............................................................48INDO AIR COMPRESSOR ......................................................................................................49INSIGHT COMMUNICATON / LIGUM SPOL S R.O. ...........................................................49INTERGULF LTD., POLYVENYL COMPONENTS BRANCH ...............................................50

Company Page#

21

Company Page#

ISOLAGO – INDUSTRIA DE PLÁSTICOS, S.A. ...................................................................50J J PLASTALLOY PVT. LTD. ....................................................................................................51JAGDAMBA POLYMERS ..........................................................................................................51J AGMOHAN PLA-MACH PVT LTD ......................................................................................52JOGINDRA ENGINEERING WORKS PVT. LTD. ...................................................................52KALIMATA PLASTIC MACHINERY PVT. LTD. ......................................................................53KRIS FLEXIPACKS PVT.LTD. ..................................................................................................53KWT MACHINE SYSTEMS CO., LTD. ...................................................................................54LAHAIROI PACKAGING SYSTEM .........................................................................................54LANDMARK EXTRUSION & ENGINEERING ......................................................................55LIGUM SPOL S R.O. ................................................................................................................55LONG DURABLE MACHINERY CO., LTD. ..........................................................................56LUNG MENG MACHINERY CO., LTD. .............................................................................56MANIAR INJECTOPLAST PVT. LTD., ...................................................................................57MARGO INDUSTRIES .............................................................................................................57MERSEN ISTANBUL ................................................................................................................58MITSU CHEM PVT LTD ..........................................................................................................58MLA INDUSTRIES ...................................................................................................................59MM9 INTERNATIONAL DMCC .............................................................................................59MAROC EXPORT (MOROCCAN CENTRE FOR EXPORT PROMOTION) .......................60MULTI TRADE GROUP ..........................................................................................................60QATAR CHEMICAL AND PETROCHEMICAL MARKETING AND DISTRIBUTION COMPANY (MUNTAJAT) Q.J.S.C. .........................................................................................61MY UAE GUIDE.......................................................................................................................62N A CORPORATION (NAROTO) ..........................................................................................62NARENDRA GRAVURE PVT LTD ..........................................................................................63NATIONAL PINK PAGES (DAR AL FAJR) ..............................................................................63OSG ASIA PTE LTD.................................................................................................................64PACKAGING MEA ...................................................................................................................65PAGDER- TURKISH PLASTICS ASSOCIATION .....................................................................66PAPRO INDUSTRIES ...............................................................................................................67PARADEEP PLASTIC PARK LIMITED .....................................................................................67PLASTINDIA FOUNDATION .................................................................................................68PLASTECH INTERNATIONAL FZC .......................................................................................68PLASTEMART.COM ................................................................................................................69POLYMERMIS/VISTAWEBSOFT .............................................................................................69POLYMER & PACKAGING INTERNATIONAL MAGAZINE .................................................70POLYMERUPDATE.COM ......................................................................................................70PRAKASH PLASTIC INDUSTRIES ..........................................................................................71PRONTO TECHNOTEX, NEEMUCH, M.P., INDIA .............................................................71

22

PRINTEX - HAMBURG GMBH ...............................................................................................72RR PLAST EXTRUSIONS PVT. LTD. ......................................................................................72REACH ADVERTISING & PUBLISHING ................................................................................73RINGIER TRADE MEDIA LTD ................................................................................................73ROTOMOULAGE DU SUD ...................................................................................................74SAI MACHINE TOOLS PVT. LTD. ........................................................................................74SAN TUNG MACHINE INDUSTRY CO., LTD. .....................................................................75SHEIKH KHAJOO BHAI & CO. PAK. .....................................................................................75SHREE KRISHNA INDUSTRIES ...............................................................................................76SHREE MAHAVIR PLASTICS ...................................................................................................76SHREE POLYSHRINK ..............................................................................................................77SHREE RADHEKRISHNA EXTRUSIONS PVT.LTD ...............................................................78SHYAM PLASTIC INDUSTRIES ...............................................................................................78SOCIETY OF PLASTICS ENGINEERS ....................................................................................79SOHAR INDUSTRIAL PORT COMPANY ...............................................................................79SRI SAI PLASTOTECH .............................................................................................................80STERLING AUXILIARIES PVT LTD ........................................................................................81SUZHOU FOSITA SCIENCE AND TECHNOLOGY CO.,LTD .............................................81THE ALL INDIA PLASTICS MANUFACTURERS ASSOCIATION (AIPMA) .........................82TRIVENI TRADING COMPANY L.L.C ...................................................................................83U V TECH SYSTEMS ...............................................................................................................83UNIDO ICAMT........................................................................................................................84UNIPLAS INTERNATIONAL EST ...........................................................................................84UNITED TUBES (PVT) LTD ...................................................................................................85VAIDIK ENGINEERING ...........................................................................................................85VINIT PERFORMANCE POLYMERS PVT. LTD. ...................................................................86VRUNDA ENTERPRISE .........................................................................................................86WIDESKY MACHINERY CO.LTD...........................................................................................87WINNER SCREEN MACHINES PVT LTD ..............................................................................87WITTMAN BATTENFIELD INDIA PVT.LTD. ........................................................................88YUDO HOT RUNNER INDIA PVT. LTD. .............................................................................88

Company Page#

23

EXHIBITOR LISTING

25

STAND NUMBER: HAL 2/ C3-5

A TO Z PACKAGINGS

Cheranellore P.O., Kochi-682 034 , Kochi, IndiaTelephone: 0484 – 2430583, 3293683, 9388605719 Fax: 0484 - 2430583E-mail: atozpack@yahoo.com Website: www.atozpack.com

ContaCt Person : Mr. abdul rasheed C.K. - ProPrietor Wide variety of Packing materials such as PVC Shrink Films (Rolls,pouches,cut sleeves, cap sleeves, shrink labels), LD Shrink Films, Polyolefin, Stretch films, cling films, bubble films, aluminum foil inner sealings, induction wads, EPE Wads, Hologram stickers, packaging nets, cosmetic bottles/containers/cream jars, airless bottles, acrylic jars, pen sprayers, Roll on bottles, hand wash/ dish wash bottles, Lotion/spray pumbs, push pull caps, Transparent PVC boxes, Hot Air Gun, Foil Sealing, batch coding, Tube Sealing, continues sealing machineries, shrink tunnel, L Sealer, collapsible tubes etc.

STAND NUMBER: H2/B3-4

ACE HEAT TECH

A 467, Rd No 34, Near EMCO Transformer, Thane – 400 604 Mumbai ,INDIA. Telephone: 022 41576000 Fax: 022 - 25806095E-mail: aceheattech@vsnl.net Website: www.ceheattech.com

ContaCt Person : Mr Moti hassnandani- Partner

Established in the year 1999, ACE Heat tech specializes in the manufacture and export of all kind of custom built hearing elements. We supply Ceramic Infrared Heater for thermoforming vaccuum forming, pipe socketing Machines & we also supply short wave infrared heater single tube or twin tube, with & without gold coating for pet industry, printing industry & coating industry.

26

STAND NO: 11

AL FALEH PP WOVEN BAGS IND. LLC

P.O. Box: 25388, Sharjah, United Arab Emirates.Tel: +9716 5347996 Fax: +9716 5347995Email: falehbag@eim.aeMob. No: 0558805767 & 0555347995

ContaCt Person: oMar a. rasheed - sales ManaGer

We are AL FALEH FACTORY for the manufacture of woven plastic bags. Classified within factories manufacture plastic woven bags of polypropylene and shopping bags , garbage bags from polyethylene which are used in the mobilization of several types of materials and goods which (all types of grins , rice , coal , sand , etc……).Our production capacity at present 3500 tons per year, among the companies that are supply in the UAE, Emirates for products grain (Emigrain), AlKaleej Sugar company , National Flour Mills, National Feed, Al Foah company, and we export our production to all GCC Countries , Iraq , Sudan…. .

STAND NO: 10

AL MAHIR PRINTING EQUIPMENTS TRDG.

AL WAHDA STREET,SHARJAH, UNITED ARAB EMIRATESTel : +971 6 5337965 Fax: +971 6 5337926Email: print@almahir4u.com Website : www.almahir4u.com

ContaCt Person: Mr.dilawar dalwai

Al Mahir Printing Equip. Trdg. Since 12 years dedicated service to meet the various needs of Screen Printing, Digital Printing Industry and advertising agencies from GCC, Middle East and African Countries.

Al Mahir based in Sharjah, one stop shop… for wide range of machineries and material required for screen printing, transfer printing, flat bed – direct to any subtract printing. They also have a wide range of sublimation products and promotional items. We have a unique combination of High quality- cost effective products supported by added value services and in-depth knowledge of screen printing industry.

27

STAND NO: 37

AL NOOR PLASTIC FACTORy

P.O.Box:8973,New Ind Area, Ajman, UAETel:+971 6 7436065 Fax:+971 6 7436134Email:alnoorplasticfactory.uae@gmail.com

ContaCt Person: shareef a al ajouz

Please visit our stand to know more.

STAND NO: 840

AL SANABEL CONVERTING

PO Box: 31203, Ajman.Tel: 0097167480906 Fax:0097167437455Email:nidal_soft@yahoo.com Website: stpi.com

ContaCt Person: nidal shaKhshir

Please visit our stand for more information.

28

STAND NUMBER: H2/B3-2

ARTI CHEMICAL INDUSTRIES

503, GIDC, Phase IV, Naroda, Ahmedabad ,INDIA Telephone: 079 – 22817278 / 09824058089 Fax: 079 - 22822711 E-mail: info@artichemical.comWebsite: www.artichemical.com

ContaCt Person: Mr. nisarG n. shah - Partner

We are Mfg of PVC stabilizer & lubricants since 1992 Ahmedabad, India. Our Products are- Conventional Stabilizers Metallic Stearates Onepack FlackesOnepck PowderOnepack for CablesOnepack for FootwareLubricants Calcium / Zinc Based Stabilizers

STAND NUMBER: H2/A3-1

ASHISH TOOLS PVT LTD

C-24 SECTOR-85, NOIDA 201305 INDIA Telephone: +91 9958968484, 8130968484 E-mail: contact@ashishtools.co.in Website: www.ashishtools.co.in

ContaCt Person: ashish saini - direCtor

Ashish Tools is the leading manufacturer of PET Preform Mould, Cap and Closure Mould, Blow Moulds and Single Stage Moulds. Having installed over 900 moulds globally and more than 500 systems in 32/48/72 Cavitation, Ashish Tools has carved a niche for itself evidently through the company’s remarkable growth of over 50% annually. With one of the Broadest product lines in the industry, customers uses our equipment to Manufacture a wide range of plastics products such as Preforms, Bottles and Caps for beverages, containers and Food etc.

29

H2/C3-3

ASP SEALING PRODUCTS LTD

ANBROS HOUSE EAST PATEL NAGAR , NEW DELHI 110008NEW DELHI, INDIATelephone: 00-91-9717795934 Fax: 00-91-11-25787357 E-mail: exp2@aspseals.com Website: www.aspplastic.com

ContaCt Person: raVeesh KuMar asst ManaGer

ASP Polyplast is a part of the ASP Group, an established name in the Automotive Industry. The ASP Group supplies Automotive Sealing Systems and Hoses to major vehicle manufacturers across the country. Being a responsible Group, it takes great care in understanding the consumer’s need and delivering quality products. With a well defined Vision in place, and a team of people with compelling business acumen, the ASP Group constantly strives to better itself. Over the years, the ASP Group has come to be known for its unmatched product quality and customer service, thereby creating a benchmark for its competitors. In a bid to diversify, the Group has now ventured into the manufacturing of Plastic Household and Industrial Products in 2012.

As a result, ‘ASP Polyplast’ was born and has been manufacturing and marketing a range of Household Products as well as Plastic Crates.

The quest for better quality products has always been the underlying reason for the success of ASP. And, keeping true to its philosophy, ASP Polyplast manufactures products made of 100% virgin plastic. All products are made under exact standards with a rigorous quality control check that ensures perfect standards are met at all stages of manufacturing. Due to this, ASP’s range of products has been widely accepted and acknowledged around the country.

30

STAND NO: 125

ASTRA POLyMER COMPOUNDING CO.LTD.

Corporate Office, KhobarKingdom of Saudi ArabiaTel:-+966-3-861 2677 Ext-106 Fax:-+966-3-861 2676www.astra-polymers.com

ContaCt Person: arif equbal

The Largest Producer in between Europe and Far East, Saudi leading company in production of high-quality Masterbatch (Black, White, and Color), Dust Free Additive Systems together with custom-made Thermoplastic Compounds, liquid based/paste colorants and custom compounding for the Polymer Manufacturing, Petrochemical and Plastics Processing Industries. Astra Polymers is Market leader, founded in 1993 as a limited liability company in 2nd Industrial City Dammam, Astra Polymers have sustained the growth of the company providing continuous service to the Plastics and Petrochemical Industries with highly skilled multinational workforce, the company has performed well during the last twenty (20) years of its operations & utilizing our different manufacturing plant in Dammam(KSA), Dubai(UAE), Istanbul(Turkey), Rabigh(KSA) & Gujarat(India).

Astra Products with different carriers PE, PP, PS, PET etc for different application areas:-

1. Compounding 2. Blending 3. Color Masterbatch4. White Masterbatches5. Black Masterbatches6. Additives• Antiblocks • Antioxidants • Antistatic • Blowing Agent • Process Aids • Slips • Antislips • UV Stabilizer • Infrared • Antifogging (clarity -food packaging, greenhouse). • Cling agents (for stretch and packaging films)7. Compounds• HDPE Pipe Compounds • PP Furniture Compounds • LLDPE Cable Compounds • LLDPE Rotational Moulding Compounds • PE Coating Compounds • ABS Compounds • PC Compounds8. PET Masterbatches9. Fiber Masterbatches10. Liquid & Paste Masterbatches11. BOPP Masterbatches12. Toll Manufacturing & Additive compounding.

31

STAND NO: H2/B4-2

BJS ENGINEERS

526, SECTOR-7, B, FARIDABAD - 121 006Haryana, INDIA. Telephone: +91-9873926696, 9810526696 Fax: +91-11-66173696E-mail: bjsengg@yahoo.co.in, bjsengg@rediffmail.com Website: www.bjsengg.com

ContaCt Person: jaGjit sinGh ViCe President

BJS ENGINEERS, an ISO: 9001-2008 certified, SSI unit, established in 1990started manufacturing & Exporting Plastic Processing Machinery Equipments like Twin Screw extruder, Automatic Slotting Machines for PVC / PE Pipes, Threading Machines, Perforating Machine, Scrap Grinders, Down Stream and Critical Spares like Twin Screw Barrels In both Conical & Parallel Technology for making uPVC Pipe/ Profile / Sheet match Able to any OEM any size, any type, economically priced, with Internationally Acceptable Quality Standards. Some of our machinery carry CE Certification, also. Based on QVS (Quality, Value & Services) ours, more than 50% sales go overseas with repetition of orders.

32

STAND NO. HALL NO. 4, 82

BMC GULF TRADING AND CONTRACTING LLC

P.O. Box 33260, Dubai, United Arab EmiratesTel: +971 4 8845001 Fax: + 971 4 8845002Email: info@bmc-gulf.com Website: www.bmc-gulf.com

ContaCt Person: diPl. inG. fouad ashKar ManaGinG Partner

Established in the UAE since 1998, BMC Gulf is the reliable and experienced partner for professional Geosynthetic and Thermoplastic engineering solutions for infrastructure, environmental, industrial, water and oil & gas projects. Value added services like detail design, professional installation through experienced engineers and certified welding technicians, as well as testing following strict quality control standards are integral part of BMC’s strategy.

APPLICATIONS:• Containment - reservoirs, tanks, secondary containment, storm water, landfill lining and capping• Structural Protection - foundation lining, tunnel waterproofing, groundwater protection• Piping Systems & Water Management - potable water, irrigation, sewage, gas, underground fire-fighting, industrial piping, surface water drainage

PRODUCT RANGE:• Pipes, Fittings, Valves, Sheets and Membranes made of High Density Polyethylene (HDPE), Polypropylene (PP) and other plastic raw materials (PVDF and ECTFE).• Geotextiles, Geogrids and Geosynthetic Clay Liners (GCL)• Modular Tanks, Soak-Aways and Drainage Pipes • Equipment and Tools for the welding of plastic sheets, liner membranes, pipes & fittings• Testing Equipment for plastic pipe laboratory setups

Geosynthetic and Thermoplastic products are sourced from European suppliers operating state of the art manufacturing facilities, and meet internationally approved quality standards.

We value quality throughout our business. In partnership with SKZ, the world’s largest plastics institute, BMC Gulf offers you the possibility of benefiting from German know-how locally. In our fully equipped training center, engineers and welding technicians can be trained and certified according to the German Technical and Scientific Association for Gas and Water (DVGW) regulations.

For further information please contact +971 4 8845001or visit www.bmc-gulf.com & www.bmc-plasticwelding.com

33

STAND NO: 1455

BRANDS ADVERTISING LLC

86046 , DubaiDubai, U.A.ETelephone: 00971 4 2599703 Facsimile: 00971 4 2599704E-mail Sales@brandsadvertising.comWebsite:www.brandsadvertising.com

ContaCt naMe: zubin jaMes ManaGer – sales & MarKetinG

Brands Advertising compiles and produces the OIL & GAS VENDOR GUIDE DIRECTORY. The Vendor guide directory contains listings of Oilfield and marine companies across the middle east categorized business wise, country wise and alphabetically. The Vendor guide has just released its 10th edition for 2014 and is one of the leading directory for the oilfield and marine industry. Email us to list your company in the forthcoming 2015 edition. sales@brandsadvertising.com or visit our website www.brandsadvertising.com

34

STALL NO.:- H2/D-4

CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGy (CIPET)

TVK Industrial Estate, Guindy, Chennai , IndiaTelephone: 044-22254780, 22254783,22254784 Fax: 044-22254787E-mail: cipethq@vsnl.com Website: www.cipet.gov.in

ContaCt naMe: Prof. (dr.) s. K. naYaK

Central Institute of Plastics Engineering & Technology (CIPET) -- an extended arm of the Department of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India -- is an ISO 9001:2008 QMS certified, NABL & NABCB accredited premier national Institution devoted to Academic, Technology Support & Research (ATR) activities for the growth of Polymer & allied industries in the country.

CIPET offers a wide range of academic programs which includes Doctoral, Postgraduate, Undergraduate, Diploma, Post Diploma and Certificate Level programs as well as Vocational Skill Development training programs in the niche areas of Plastics Engineering & Technology to fulfill the human resource requirements of polymer and allied industries in the country. Every year more than 35,000 students/participants are being benefitted through the above programs.CIPET has signed a Memorandum of Understanding with the 16 leading International Universities for faculty & student exchange programs, bilateral R&D initiatives and collaborative research projects.

CIPET’s International recognition is apparent from the fact that the prestigious assignments of Academic and Consultancy Services are continuously being received from various countries viz. Sultanate of Oman, Kingdom of Saudi Arabia, Srilanka, Qatar, UAE, Singapore, Malaysia, Nigeria, Kenya, Bangladesh, Mauritius, Australia etc.

CIPET offers its Technology Support Services in all the key sectors of Indian Economy which includes Automobiles, Aerospace, Agriculture, Building & Construction, Defence, Fast Moving Consumer Goods (FMCG), Information Technology, Medical, Packaging and Teletronics, etc.CIPET established 02 R&D wings viz.Advanced Research School for Technology & Product Simulation (ARSTPS) at CIPET Chennai andLaboratory for Advanced Research in Polymeric Materials (LARPM) atCIPET Bhubaneswar focusing on Research & Development in the specialized areas such as Product Design, Advancements in Polymeric Materials, Bio-Polymers, Fuel Cells, e-waste recycling etc.,

35

STAND NO: H4-107

BOROUGE UAE

Borouge Tower, Shaikh Khalifa Energy Complex, Corniche RoadP O Box 6925, Abu Dhabi, UAETel: +971 2 6070300 | Fax: +971 2 6070999 | email: info@borouge.com

Borouge is a leading provider of innovative, value creating plastics solutions. A joint venture between the Abu Dhabi National Oil Company (ADNOC), one of the world’s major oil and gas companies, and Austria based Borealis, a leading provider of chemical and innovative plastics solutions, Borouge is a groundbreaking at the forefront of the next generation of plastics innovation.

With its base in the United Arab Emirates and its Marketing & Sales head office in Singapore, Borouge employs more than 3,000 people with over 40 nationalities, serving customers in 50 countries across the Middle East, Asia and Africa.

Building on the unique Borstar® and Borlink™ technologies and over 50 years of experience in polyolefins, Borouge provides innovative, sustainable and value creating plastics solutions for infrastructure (pipe systems, and power and communication cables), automotive and advanced packaging applications that address global challenges such as climate change, food protection, access to fresh water, energy conservation, healthcare and waste management.

STAND NO: 32

DEASUNG EXT KOREA SOUTH

DAESUNG EXT1071-2 Chimsandong, Bukgu , Daegu , South KoreaTelephone: 82 53 359 0421 Fax: 82 53 356 8871 E-mail: daesung0421@naver.com Website: www.daesungext.com

ContaCt Person: Mrs. daisY Yoon

DAESUNG EXT is a professional manufacturing company of synthetic resin extruding machine. We have been producing machines such as PP/PET strap band line, polyester fiber(PFS) line, PE pipe line, and recycle line. Our team has more than 20 years of experiences in the manufacturing, and has made an effort to product high quality machines based on our accumulated know-how. We have expanded our business since the establishment in 1995. As a top leader of the industry, DAESUNG EXT has been concentrating its efforts on developing new technology. We will make a promise that we will do our best for the customer’s satisfaction through continuous Research and Development.

36

STAND NUMBER: HALL 2/ A3-5

DEESHA IMPEX

A – 7, Ambawadi Flats, Bhudarpura, Ahmedabad, IndiaTelephone: + 91 79 2646 2772 Fax: + 91 79 2646 2772E-mail : biz@deeshaimpex.com Website: www.deeshaimpex.com

ContaCt Person : Mr. KhaGen V. Mehta

Deesha Impex, Ahmedabad, India redefines quality through innovation customization with a state of the art after sales service with a “Customer First” approach anytime anywhere in the world with the best price for our customers.

The genesis of our precision is due to our diverse origin, while we value our uniqueness and specific strengths of our team that takes us to perfection in tandem since our inception. We are a team of world class connected professionals with more than 1200 man years of engineering expertise to customize precision. We are headquartered at Ahmedabad, Gujarat in India with a state-of-the-art sales and service network across the globe.

Deesha Impex R&D constantly monitors the industry transformations and in tandem with the manufacturing innovates the pioneering technologies with a quality perfection attitude customizes for customer satisfaction. These innovations have today produced a range of high quality precision testing equipments and created a range that caters to any testing machinery needs of the plastic industries of any size.

37

STAND NO: 93

DGCX UAE

Emaar Business Park, Building No. 2, Level 1P O Box 37736, Dubai, UAET. + 971 4 361 16 16 F. + 971 4 361 16 17Email: madyan.jabr@dgcx.ae Website: www.dgcx.ae

ContaCt Person: MadYan jabr ManaGer - CoMMuniCations & MarKetinG

Dubai has historically been an international hub for the physical trade of not only gold, but also many other commodities and so the establishment of the Dubai Gold & Commodities Exchange (DGCX) was the next logical step for the region and the local economy. DGCX commenced trading in November 2005 as the regions first commodity derivatives exchange and has become today, the leading derivatives exchange in the Middle East.

DGCX is majority owned by Dubai Multi Commodities Centre (DMCC), a strategic initiative of the Government of Dubai, with a mandate to enhance commodity trade flows through the Emirate by providing the appropriate physical, market, financial infrastructure and services required. The Management team of DGCX comprises senior personnel from the commodities, securities and financial services industries bringing a wealth of experience and expertise to ensure the success of DGCX.

STAND NUMBER: H2/B2-2

DHWANI POLyPRINTS PVT. LTD.

215/15,MaganMahal,M.V.Road Court Ln, Andheri East, Mumbai, INDIA Telephone: 098 33 248077 Fax: 022 – 2641038 E-mail: aditya@soundseal.in Website: www.soundseal.in, www.plasticbagsmanufacturers.net

ContaCt Person: Mr. aditYa roonGta VP MarKetinG

Dhwani is into the manufacturing of plastic bags and pioneered the manufacturing of PP in India in 1978. Our product range includes the following products:a. Courier Bags b. security Bags c. STEB Bags d. Shopping Bags e. PP Bags and rollsf. Wide Width LDPE Rolls g. Coalition Shrink Films h. Garbage BagsSome of our special manufacturing highlights are:1. Extrusion upto 2160mm in LDPE. 2. Flexo Printing upto 1200mm with half tone printing.3. Bottom sealing upto 1400mm & Side Sealing in upto 1000mm.At Dhwani we are not only selling packaging material but are providing complete packaging solutions.

38

STAND NUMBER: C4-4

DR. TRADE POINT / GIRIVARyA NONWOVEN FABRIC PVT. LTD.

Plot No.1 to 4 & 11 to 14, Survey No. 75P/4, Behind Vandeshwar Temple, Gondal Road, N.H. 8B, Bhunava, Tehsil:Gondal, District: Rajkot Gujarat, IndiaTelephone: +91 9099092048 E-mail: girivarya@gmail.com Website: www.girivaryanonwoven.com

ContaCt Person: sandiP baldha direCtor

Girivarya Non-woven Fabric Pvt. Ltd., one of the world’s largest, leading suppliers of high performance speciality nonwoven fabrics, Girivarya Nonwovens provides durable, flexible and value-added solutions for both industrial and consumer-based products. With major operations in domestic and as well as in global market, Girivarya Nonwovens has the resources to meet customers’ individual needs on a global scale.From furnishings and industrial apparel to Medicalapplications, our innovative technology yields nonwoven fabrics for even the most diverse applications. Using a variety of mechanical, thermal and chemical bonding processes, our nonwoven products can be customized to meet strict performance requirements.

STAND NO: H4-1030

DWJ MASTERBATCHES COMPANy LIMITED.

Dongshan Village, Qishi Town, Dongguan, Guangdong..Country: ChinaTelephone: +86-769-82632188-8007 Fax: …+86-769-82637333 E-mail: Leavy@dwj88.com Website: www.black-masterbatches.com

ContaCt naMe: leaVY zhanG oVersea sales

“DWJ Masterbatches Company Limited”was estimated in year 1999 at Dongguan Producing middle-high grade masterbatches,the facilities cover a land of 7000 Square meters.Owing to large demands from China local market,we have Established one subsidiary factory in Qishi 2011 equipped with state-of-the-art twin Screw extruder&kneaders producing high-end black masterbatches.

We are a Leading manufacturer specialized in PE/PP/ABS/PS based black masterbatchesWith totally 8 masterbatch production lines,totally 20,500 square meters and having a capacity of more than 36,000tons per year.

39

STAND NO: 1050

ELAN INTERNATIONAL

P.O. Box: 9410, SAIF Zone, Sharjah, U.A.E. Tel : +971 65576111 Fax : +971 65575430 Email : sales@uaeelan.com

ContaCt Person: lalit GuPta

Élan incorporated FZE located in the free trade export SAIF Zone, Sharjah is an established player in the field of Industrial packaging. The company’s product range covers blow molded packaging including large size 200/235 litre drums, medium and small size packaging and pails. The company has state-of-art production facility at Sharjah, employing stringent quality control systems.

Élan Incorporated FZE is a part of a multinational group, Time Tech, which brings you the world’s most popular designs at your doorstep and promises to update you the with latest packaging products continually.

40

STAND NO: 850

EPI ENVIRONMENTAL PRODUCTS INC.

Suite 801 - 1788 West BroadwayVancouver, B.C., Canada V6J 1Y1Tel: 1.604.738 6281 Toll Free: 1.866.738 6281Fax: 1.604.738 7839Email: diliprodrigues@epi-global.comWebsite: www.epi-global.com

EPI is the pioneer and world leader in oxo-biodegradable plastics technology since its incorporation in 1991. Oxo-biodegradable technology is an internationally recognized technology that enables commodity plastics, viz PE and PP to degrade and biodegrade in the right environment.

EPI develops and manufactures its proprietary plastic additives known as TDPA® (Totally Degradable Plastic Additives). It grants licenses to plastic manufacturers to use its technology to manufacture oxo-biodegradable plastic products. TDPA® is widely used and incorporated into single used plastic products such as shopping bags, garbage bags and agricultural mulch films. It is also incorporated in a specialized degradable plastic film called EnviroTM Cover which is used as an alternative daily cover to save airspace in municipal solid waste landfills.

EPI has a global presence. Its network of agents and distributors covers more than 60 countries around the world. Some of the world’s largest and best-known companies have used plastic products manufactured with EPI’s technology, including Hong Kong Disneyland (Hong Kong), Carrefour supermarkets (Colombia, Greece and Indonesia), Metro Group (Bulgaria and Turkey), Migros supermarket (Turkey), IGA supermarket (Canada) , Exito supermarket (Chile, Colombia and Venezuela), Soriana (Mexico) and Atu Duty Free (Turkey, Georgia, Tunisia, Macedonia, Latvia).

EPI`s daisy logo and brand is widely recognized as a premium quality and environmentally responsible product. Marketed and sold in over 60 countries, EPI is looking for distributors globally to represent us. If you are interested to find out more about this opportunity, please contact us at info@epi-global.com or visit us in Hall 4, Booth 850 at Plastivision Arabia.

Products on Display:A selection of plastic products manufactured with EPI’s technology for various industries such as supermarkets, food service, hotel catering, municipalities, janitorial, airlines, and healthcare industries. These products include garbage bags, shopping bags, Ziplock bags, cling films, cutleries, cups, plates, food trays, aprons and gloves.

41

STAND NO: H4-830

ESMA - EMIRATES STANDARDIZATION & METHODOLOGy AUTHORITy.

P.O.Box 48666 Business Avenue, Deira, 15th Floor, Dubai - UAETel:+97142944434 Fax: +97142944428Email: info@esma.ae Website: www.esma.gov.ae

ContaCt Person: ahMad saif

ESMA was established as the sole standardization body in the UAE under the Law No. 28/2001. The board of directors chaired by H.E. Dr. Rashid Ahmed Bin Fahad, the Minister of Environment & Water in the UAE is comprising representatives of the main parties involved in the standardization of the UAE. The board is the dominant affairs and lay down its policy and adopting all the suitable procedures to ensure efficient performance to its assignments.

During Plastivision Arabia, ESMA will educate the plastic industry about the usage of Degradable additives.

STAND NO: H2/C2-2

EXPERT INDUSTRIES PVT. LTD.

274-C, KIADB Industrial Area, Bommasandra,Anekal Taluk, Bangalore - 560 099, Bangalore, INDIATelephone: 080 - 27832695 / 6 / 7 Fax: 080 - 27832037E-mail: marketing@expertindia.com, finance@expertindia.com Website: www.expertindia.com

ContaCt Person: Mr. sanjoY sharaM- dGM – MarKetinG

Design and manufacture of rotogravure printing machine, laminating machine and special purpose coating machine .

42

STAND NO: 826

FAV PLASTICO PVT. LIMITED

B-66 /A,S.I.T.E.AREA,KARACHI-75700,PAKISTANTEL: +92(21)32550093-98 FAX: +92(21)32550099Email:faird@vawda.com Website: www.vawda.cowww.favplastico.com

FAV Plastico Pvt. Limited., works under the umbrella of Farid Ahmed Vawda & Co. FAV businesses have been providing quality products in various sectors for years. FAV Plastico Pvt. Limited., therefore understands the growing needs and requirements of the plastic industries and other businesses. The company has taken steps and measures to produce high quality Master batches under the supervision of qualified and experienced heads. We at FAV Plastico promises to deliver the quality product in order to maintain our reputation as one of the leading Master batch providers across Pakistan and with a vision to expand throughout Asia. Our color, black, white and additive Master batches meet the diverse appearance and demands for the plastic products. We take great pride in producing high profile Master batches which are cost-effective as well as of great quality.

STAND NUMBER: H2/C4-1

FIELDKING POLyMERS

PLOTNO:G-1123,ROAD-E,METODA GIDC RAJKOT(Gujarat)India. RAJKOT, INDIA Telephone: +91-95373 70020 E-mail: fkpolymers@yahoo.com Website: WWW.FIELDKINGPOLYMERS.COM

ContaCt naMe: heMal . r . PoPat. - direCtor of the CoMPanY

Fieldking polymers is a leading manufacturer of pvc hose pipe , garden pipe , & Hdpe pipe . brought to you with in 15 years of experience . the company was established in 1999 with the broad vision of giving something new and more better products. We always strive to give something better than traditionally available products in the market . our ultimate goal is to provide 100% satisfaction and return on the money paid by all our customers . we employ advanced machinery and equipments to manufacture the pipes in accordance with international quality standards . our quality auditor test the quality of these products on various parameters to ensure their excellent quality . owing to flexibility , durability , light weight , tensile strength and resistance to chemical & abrasion these are in high demanded across various industries.

43

STAND NO:827

GATRONOVA/KRySTOFILMS

KARACHI,PAKISTANTelephone: 0092 3018201754 Fax: 0092 21 35659589E-mail: asifmalik@gatronova.com Website: www.gatronova.com

ContaCt Person: asif Manzur MaliK. dY ManaGer

Gatron (Industries) Ltd. and Novatex Limited belong to a group of companies, G&T – Gani & Tayub. The group is in business since 1948. With over the five decades of operational excellence, experience and expertise have all formed a combined strength to empower the group as a leading name in fashion garments (BONANZA), Synthetic Textiles, Polyester Filament Yarn, Polyester Chips, PET Resin, PET Preforms under the name of “GATRONOVA”., A PET Sheet, Thermoforming under “ KRYSTALITE” & latest addition on BOPET Film in Pakistan Under “KRYSTOFILMS”. More than 6,500 employees represent the work force in all its group companies.

The group realizes the importance of customer relationship and strives to deliver products employing sophisticated technological facilities. The group continuously works for evolving innovative business strategies with an eye on expansion.

STAND NUMBER: C4-4

GIRIVARyA NONWOVEN FABRIC PVT. LTD.

Plot No.1 to 4 & 11 to 14, Survey No. 75P/4, Behind Vandeshwar Temple, Gondal Road, N.H. 8B, Bhunava, Tehsil:Gondal, Rajkot, Gujarat, IndiaTelephone: +91 9099092048 E-mail: girivarya@gmail.com Website: www.girivaryanonwoven.com

ContaCt Person: sandiP baldha direCtor

Girivarya Non-woven Fabric Pvt. Ltd., one of the world’s largest, leading suppliers of high performance speciality nonwoven fabrics, Girivarya Nonwovens provides durable, flexible and value-added solutions for both industrial and consumer-based products. With major operations in domestic and as well as in global market, Girivarya Nonwovens has the resources to meet customers’ individual needs on a global scale.From furnishings and industrial apparel to Medicalapplications, our innovative technology yields nonwoven fabrics for even the most diverse applications. Using a variety of mechanical, thermal and chemical bonding processes, our nonwoven products can be customized to meet strict performance requirements.

44

STAND NO: 90

GPCA

Apect - Tower D, 706/705,Dubai, UAETelephone: 0553335431E-mail: dima@gpca.org.ae Website: gpca.org.ae

ContaCt Person: GauraV Paul

The Gulf Petrochemicals and Chemicals Association (GPCA) is the voice of the industry in the region. Established as a non-profit organization in March 2006, it is the first trade association in the Gulf and the largest and most respected industry body representing the downstream sector in the Middle East. Today, the association has 232 members from over 30 countries, including the largest Arab world and multinational companies.Committed to providing a regional forum where stakeholders from across the industry share insights, solutions and new ideas, the GPCA has six working committees – Plastics, Supply Chain, Fertilizers, International Trade, Research and Innovation, and Responsible Care – and organizes six world-class events each year. The association also publishes an annual report and a regular industry newsletter, Insight and reports. Since its inception, the GPCA has raised the standard for industry-wide cooperation and continues to promote the region and its interests in the international policymaking sphere.Additional information is available at www.gpca.org.ae and the GPCA can also be found on Facebook and Twitter.

STAND NO: 540

GRACE GMBH & CO. KG

ln der Hollerhecke 1 ,67454 Worms / GermanyTelephone: +49 6241 4O3 1220E-mail: m.neuwinger-razek@grace.com. Website: wvvw.orace.con

ContaCt Person: Marion neuwinGer-razeK -Global Mar CoM ManaGer

Grace is a leading global manufacturer of catalysts; engineered and packaging materials;and, specialty construction chemicals and building materials.The company’s three industry leading business segments - Grace Gatalysts Technologies, GraceMaterials Technologies and Grace Construction Products - provide innovative products, technologies and services that enhance the quality of life. Grace employs approximately in over 40 countries.

45

STALL NO.: H2/B-1

GURUCHARAN INDUSTRIES

PLOT NO QG 1,2,3 INDUSTRIAL ESTATE, BAIKAMPADY, MANGALORE ,INDIA Tel: 91-824-2409556,2400966,2400866 Fax: 91-824-2408466 E-mail:gurucharanindia@dataone.in, Website: www.gci-india.com

ContaCt naMe: jaYaKar ManaGinG Partner Company Profile: Gurucharan Industries was promoted by Mr. Jayakar Shettigar in the year 1996 to manufacture the following:1. Plastic Processing Machineries. 2. Allied Machineries3. Spare Parts and Components of Plastic Processing & Allied Machineries

To undertake vast research in extrusion of films, GURUCHARAN INDUSTRIES has started the manufacture of single screw HMHDPE/LDPE/LLDPE Blown Film Plant and developed the same to Twin Die, Four Die and Rotating Die Blown Film Plant in PP. Also invented other allied machineries such as Scrap Crusher, Twin Chamber Air Cooled Reprocessing Plant, Water Cooled Reprocessing Plant, Gusseting Machine, Hopper Dryer, Mixing Machine, Pneumatic Punching Machine etc. To save time and labour in color printing, we have recently developed a HMHDPE two color film extrusion with two color flexo printing and first launched in PLASTINDIA 2009 Exhibition at New Delhi and appreciated by the visitors and exhibitors as well. Our new addition is Two Layer HMHDPE/LDPE/LLDPE Blown Film Plant introduced to the market.

The unit has got latest and state of the art special purpose facilities for in house machining. The unit manufactures critical components of extruder machines like screw, barrels, dies, spirals, helical gearbox, housing etc. Our Machines are sturdy and robust built, a unique quality of power, labour, and space saving device introduced to the global market. We got an experienced technical team to cater the needs of our valued customers and troubleshooting will be attended promptly.

Salient Features of our machines:• AC Variable Frequency Drives • Automatic Air Filling System of Bubble• Automatic Pneumatic Control Systems for Nip Roller & Embossing Roller Adjustment.• In-house control panel • Low Power Consumption with High Output• Knurling Roller Attachment. • PID Temperature Controllers• Auto Roll Weight Change Siren • Compact Design-space saving device.

Restless and continuous research and development is the backbone of GCI success within a short period of 15 years. Supported with reliable after sales service backed with 38 years of experience in operating, maintenance and manufacture of Plastic Extrusion Machineries, GURUCHARAN INDUSTRIES entered the Export Market.

46

STAND NO:22

HIGHGATE PLASTIC FACTORy

SHIFA INDUSTRIAL AREA, RIYADH, SAUDI ARABIATel:00966112985944 Fax: 00966114235011Email:info@hgplastic.net, highgate25@hotmail.com

ContaCt Persons: wasiM Murad-MarKetinG sPeCialist

Highgate plastic factory is one of the professional manufacturers of injection and blow molding products. Like pet form disposal cutlery items caps and closers. Our all products are food grade hygienically manufactured and non toxic.

Over the course of time we have also helped our client to save significantly on there Packaging, transportation cost etc.

STAND NUMBER: H2/C1

HILDA AUTOMATION

PLOT NO, R 810, TIC Industrial Area, Thane, Thane Belapur Road,Rabale, Navi Mumbai – 400 70, Mumbai, INDIATelephone: ...022 -27641585 Fax: 022 - 27642387E-mail: marketing@hildaautomation.inWebsite: www.hildaautomation.in

ContaCt naMe: sofiYa shaiKh sales ManaGer

entire ProduCt ranGe: Machines in Fully Automatic, Semi Automatic and Manually type.Filling machines. for Mineral water, Juice, milk, Yoghurt/Dahi, Jelly/Jam/Ketchup, Oil, Liquor, chavanprash, Mango Pulp,)Sealing machines. (Pre-cut Aluminium Foil type & Laminated Film type)Capping machines (Screw type, Press fit)Shrink Sleeve Applicator (looBPM & 20013PM) (Body & Neck Sleeving)Sleeve Cutting machines (With Perforation & Without Perforation)Bopp hot melt labelling machineTunnel (Heat Based & Steam based)

47

STAND NO: 84

ICIS

Direct: +65 6780 4339Email: laura.brown@icis.comwww.icis.com

ContaCt Person: laura brown MarKetinG exeCutiVe

ICISis the world’s largest petrochemical market information provider, and has fast-growing energy and fertilizer divisions. Our aim is to give companies in global commodities markets a competitive advantage by delivering trusted pricing data, high-value news, analysis and independent consulting, enabling them to make better-informed trading and planning decisions.ICIS also provides a number of FREE resources(www.icis.com/market_updates) to keep you informed of what’s happening in the markets you’re interested in. Sign-up to ICIS e-newsletters (www.icis.com/market_updates)to receive regular market updates, price trends, analysis and outlook articles on your areas of interests.

STAND NO: 36

INTERNATIONAL DATABASE AND DIRECTORy SERVICES FZC (IDDS) LTD

A-3/49 SAIF ZONE AIRPORT FREEZONE SHARJAH SHARJAH, UNITED ARAB EMIRATES.Tel : + 971 6 5571399 Fax : + 971 6 5571388 Email : arif@idds.ae Website : www.idds.ae

ContaCt Person: Mr. arif Mohd Khan sales ManaGer

Based in Sharjah Airport Free Zone, International Database and Directory Services (IDDS) compile, produce and distribute “The Gulf E-mail and Fax Directory”. Now in its 15th edition, the publication is an essential aid to any GCC wide marketing campaign.IDDS also produce a series of specialised directories bound in with an executive diary to ensure desktop retention and daily use, all year-round. Industries covered include B2B, Shipping and Transport, Oil and Gas, Construction and Real Estate.In addition, IDDS offer Direct Mail Services and permission based e-mail marketing using the company‘s constantly updated database to reach the profiles required by customers.IDDS is member of the Dubai Chamber’s Printing & Publishing Group (PPG), an industry body whose strict code of conduct assures customers of professional levels of performance and integrity; in addition to also being member of the Middle East Publishing Association.

48

STAN NO: 635

IFRIQUIA PLASTIC

BD, Chefchaouni Km 11,5 ZI Sidi BernousiCasablanca, MoroccoTel;212 522 354545 Fax:212 522 35 0619Email:l.benchekroun@iplast.com Website: www.ifplast.com

IFRIQUIA PLASTIC leader of the plastic processing industry in Morocco, is specialized in injection, extrusion and blowing of the plastic.Our company is present in the following sectors:• AUTOMOTIVE • PACKAGING • ELECTRICAL APPLIANCE • HANDLING• ENVIRONMENT

Our products are highly varied, we produce handling articles(pallets, boxes) and environment articles(bins, containers)seats for stadium.

Aware of the importance of quality for our customers/partners, we were certified:ISO9002-TUV(1999),ISO 9001 V 2008 TUV,ISO /TS(2003).Our efforts were crowned by the national 2nd price quality(2003) GS-LGA.

STAND NUMBER: H2/B-2B

INTERNATIONAL MARKETING CORPORATION

418, Swastik Chambers, Sion Trombay Road, ChemburMumbai , INDIA Telephone: +91 22 6684 0000 Fax: +91 22 6684 0099 E-mail: prashant@imc-india.com Website: imc-india.com

ContaCt Person: Mr.Prashant M shah exeCutiVe direCtor

LMC is bringing best of the technologies for PV manufacturing with total solutions from Polysilicon, Wafer Cell Module Manufacturing by representing world class companies. Also offers complete solutions for PCB assembly automation and cable cutting, striping, crimping and marking. 1MC is established in 1975, with Head Office at Mumbai and Branches at New Delhi, Bangalore, Pune and Chennai. We provide total solution for Solar Power Projects for farms and Rooftop systems. IMC is Channel Partner of Ministry of New & Renewable Energy-Government of India. MC is committed to carry out detailed engineering to ensure long term performance of solar projects.

49

STAND NUMBER: H2/C1-3

INDO AIR COMPRESSOR

Plot No.550, Main Road, Kathwada,G.I.D.C., Ahmedabad - 382 430Gujarat, IndiaTelephone: 079-22901951 Fax: 079 - 22901952Email: mktg@indoair.com, info@indoair.com, kcp@indoair.comWebsite: www.indoair.com Mobile: 09327726270 / 9574438777

ContaCt Person: Mr. Kuntan PanChal joint Md

Manufacturer & Exporter of Reciprocating & Rotary screw lubricated / Non Lubricated Air Compressors, Vacuum pumps & replacement spares.

STAND NUMBER: H2/B3-3

INSIGHT COMMUNICATON / LIGUM SPOL S R.O.

M.Svabinskeno, 466 05 Jablonec nad Nisou, Czech Repulic.Telephone: +91 11 30882443 /44 E-mail: bhupendra.ks@insightwithin.com Website: www.insightwithin.com

Mr. bhuPendra sriVastVa - direCtor (sales)

INSIGHT Communications –a professional organization that has steadily grown to become India’s largest dealer for Graphic Arts equipment sales. Insight was founded in 1991 in Mumbai for selling prepress equipment from Linotype Hell and Ultre. Insight partnered with Scitex in 1995 and since then, it has been a leader in selling prepress solutions. The largest number of Dolev Imagesetters, flatbed scanners and workflow solutions has been sold in the Indian market. When CTPs came in, Insight was one of the first to get of the blocks and sold the first thermal CTP to Pragati Offset, Hyderabad way back in 2001, since then Insight has sold around 400 CTPs in the Indian market. Over the period of time, Scitex became CreoScitex, then Creo and finally Kodak. Insight’s association with this group is now 17 years old. Insight has maintained the leadership position in prepress equipment for around 15 years now.INSIGHT partnered with Scitex at the very beginning of their digital journey to make it the number one Wide-format Brand in India. INSIGHT was successful in installing and maintaining close to 15 Scitex products in India including Grandjets, XLJets, Idanit, Turbojets and Corejet. It became the leader in the high end Large format industrial machine sales. Scitex Vision was bought over by HP and it became HP Scitex thereafter. Insight continues to be the biggest channel partner of HP Scitex in India. It services all HP- Scitex installations in India through its highly experienced workforce.

50

STAND NO.:1818

INTERGULF LTD., POLyVENyL COMPONENTS BRANCH

Khalid sea port Post Box 6131Sharjah, UAETel.: +97165029250 Fax: +97165285720Email: tvsekar@iffco.com Website: www.empol.com, www.iffco.com

ContaCt Person: t V seKaran

IntergulfEmpol, a member of theIFFCO Group manufactures world class PET preforms & closures at its state of the art facilities in the UAE. IntergulfEmpol division is one stop low cost solution for PET beverage packaging, including invention, design, mock up sample, prototype mould, sample bottles, Production moulds, preforms, caps & master batches.Gained recognition repeatedly from customers over the region.Infrastrcture: Design & Development facilities, Prototype facilities, Manufacture facilities and wide range of preforms, caps facilities at one place.

STAND NO: 91

ISOLAGO – INDUSTRIA DE PLÁSTICOS, S.A.

ESTRADA NACIONAL 3, KM16 ,AVEIRAS DE BAIXOPORTUGALTelephone: +351 243 750 180 Fax: +351 243 750 188E-mail: liliana.cancela@isolago.comWebsite: www.isolago.com

ContaCt Person: liliana CanCela - ProduCt ManaGer

ISOLAGO is an Iberian company producing Masterbatch and Compounds.We are a pioneer, dynamic and flexible company constantly focused on meeting our Customer’s requirements. Our project cover more than one field of activity within the plastic processing industry (blow film, cast film, injection molding, sheet extrusion, blow molding…).

Our products are produced with virgin polymers mixed with high quality additives in order to achieve an outstanding performance even in the most demanding applications.

WE ARE LEADERS IN THE PRODUCTION AND EXPORT OF WHITE MASTERBATCH!

51

STAND NUMBER: H2/A1-4

J J PLASTALLOy PVT. LTD.

A-2 Badhshah bagh, Maldahiya, Varanasi, IndiaTelephone: 0542 – 2391915 Fax: 0542 - 2391913E-mail: marketing@jjppl.co.in Website: www.jjplastalloy.com

ContaCt naMe: abhisheK PandeY / Mr. shiVaM bansal

Company Profile: JJ Plastalloy Pvt. Ltd. is one of the largest manufacturers and exporters of Calcium Carbonate Masterbatches, White Masterbatches, Black Masterbatches and engineering compounds in India. Our products are being exported to many different countries. Calcium Carbonate Masterbatches, White Masterbatches, Black Masterbatches Additives Masterbatches PP Compounds for Automobiles Application Nylon Compounds for Engineering Applications.

STAND NUMBER: H2/D3-2

JAGDAMBA POLyMERS

25, Ganeswarpur Industrial Estate, Balasore – 756 019, Orissa, INDIATelephone: 06782 241787 / 8 Fax: 06782 - 241793 Mob : 9904242700E-mail: info@jagdambapolymers.co.in Web: www. Jagdambapolymers.co.in

ContaCt Person: Mr jaYesh / Mr Viral ProPrietor

JAGDAMBA POLYMERS PRIVATE LIMITED, made a modest begining in 1999, is a pioneer and one of the largest plastic injection moulding facility in the region.The Company is an ISO 9001:2008 Certified, well known manufacturer for variety of plastic consumer products. The products manufactured include Plastic Household, Plastic Moulded Furniture Products, Plastic Crates, PET Preform and products made to the sepcification of the customers. The company’s brand enjoys high brand value among the consumers.The Company is growing at a faster rate by expanding capacity, installing latest machinery and equipments, introducing new products to become the largest facility in the region to manufacture wide variety of moulded products. The products are manufactured in our highly productive, energy efficient & microprocessor controlled machines supported by highly qualified technical team. We have a strong Research and Development support and testing equipments.We can also manufacture products as per customers specification and design. Our experience for such products includes Television Cabinets, ABS Plastic Bobbins for Jelly filled and Optic Fiber Cable manufacturers of different sizes ranging from 400 to 630 mm dia, components for Coolers (air-conditioner) and many other such products.

52

STAND NUMBER:- HALL 2/C3-1

JAGMOHAN PLA-MACH PVT LTD

901-B, 9th floor, Filix Complex, Opp. Asian Paints Ltd., L. B. S. Marg,Bhandup (West), Mumbai-400078,India. MUMBAI, INDIATelephone : 022-2595 5678 E-mail: accounts@jagmohan.com Website: WWW.JAGMOHAN.COM

ContaCt Person: Mr.jaYesh thube. aCCountant

Company Profile: Mfgrs & Exporters of : Plastic Blow Moulding Machines from 200ML to 5000 Ltrs. Capacity SINCE 1980 Jagmohan Pla-Mach Pvt. Ltd. Corporate Office : 901-B, 9th floor, Filix , Opp. Asian Paints Ltd., L. B. S. Road, Bhandup (West), Mumbai-400078, India Tel.: 2595 5678/2595 0246. FAX: +91 22 2596 5434 E-MAIL: info@jagmohan.com_Website: www.jagmohan.com Works: Survey no.48, 54 & 56, Manas Mandir Road, Mumbai-Nasik Highway, Taluka Shahapur, Asangaon (West)-421 301, Dist.Thane, Maharashtra (India) . Tel: 02527 273 314 . Fax: +91 2527 270081 . E-mail: support@jagmohan.com

STAND NUMBER: H2/D1-1

JOGINDRA ENGINEERING WORKS PVT. LTD.

A-586 RIICO INDUSTRIAL AREA, PH-1 BHIWADI(RAJ). INDIATelephone: +919717460740. E-mail: PPM@JOGINDRA.NET Website: WWW.JOGINDRA.COM

ContaCt Person: PushPinder sinGh. direCtor

Company Profile: JOGINDRA is one of the leading firm in India since 1959 manufacturing and marketing Plastic Processing Machines such as JOGINDRA Heating Cooling Mixers (vertical), Heating Cooling Mixers (horizontal), Cooling Mixers (vertical), Cooling Mixers (horizontal), Ribbon Blenders, Batch Conveying Systems (semi/fully automatic), Master Batch Mixers, Container Mixers, Plastisol Mixers, Food Processing Mixers, Tumbler Mixers, Paste Mixers, Scrap Grinder, Pulverizer, Shredders etc…

53

STAND NUMBER: HALL 2/A4-4

KALIMATA PLASTIC MACHINERy PVT. LTD.

1A/602, SIddhachal Phase 1, Pokhran Road NO. 2 Thane (West), IndiaTelephone: 022 32622005 Fax: 022 21713027E-mail: info@kalimata.inWebsite: www.kalimata.in

ContaCt naMe: Prasad ChaPheKar- ManaGinG direCtor

PRODUCTS:1) THREE LAYER BLOWN FILM PLANT (ABC & ABA)2) TWO LAYER BLOWN FILM PLANT3) MONO LAYER FILM PLANT4) ACCESSORIES FOR BLOWN FILM PLANT

STAND NUMBER: H2/C4-3

KRIS FLEXIPACKS PVT.LTD.

A 39, Road No 11, Wagle Industrial Estate, Thane – West, Thane - 400604Mumbai , IndiaTelephone: 022 - 30948000/022 – 30948080Fax: 0542 - 2391913Mobile: 9820068500E-mail: viresh.s@krisflexipacks.com Website: www.krisflexipack.com

ContaCt Person : abhisheK PandeY / Mr. shiVaM bansal ManaGer (exPort)

Company Profile: Kris Flexipack Pvt. Ltd. (KFPL) has been an integral part of flexible packaging industry’s exponential growth for over 27 years KFPL is an Asia leads in provided customized solutions in the flexible packaging domain, by successfully fulfilling customer needs with its high quality packaging products that optimize efficiency and increase profitability.

54

STAND NO: 1700

KWT MACHINE SySTEMS CO., LTD. No. 21, Taiping 21 Street, Taiping Dist., Taichung City 41161, Taiwan Tel: +886-4-22773390 Fax: +886-4-22773412 E-mail: sales@kwt.com.tw / kenny@kwt.com.twWebsite: www.kwt.com.tw

ContaCt Person: Mr. KennY huanG

Products:1. Auto Filling Machine 2. Auto Capping Machine3. Auto Labeling Machine 4. Auto Induction Cap Sealer5. Bottle Leak Tester 6. Roll-Fed Labeler for OPP Film7. Bottle Unscrambler 8. Shrink Sleeve Labeler9. Label Printing and Solutions

STAND NO:86

LAHAIROI PACKAGING SySTEM

SAIF ZONESHARJAH, UAE Tel : + 971 6 5578565Fax : +971 6 5578164Email : sales@lahairoi.ae Website : www. lahairoi.ae

ContaCt Person: Mr. john daniel

Lahairoi Packaging System is leading company for supplying fully automatic Packaging line for foods, Non Foods products, chemicals, pharmaceuticals, Oil etc. by Professional and technical team experienced in packing field.

The company is able to satisfy producers of all sizes. Ensuring a service of rapid and qualified assistance is a key obligation that we assume from the moment of Delivery of our machines.The human factor is the first consideration so our suppliers developed various Models of packaging machines which can be easily operated by any technician even without professional training.We are supplying packaging machine with full service installation, programming, Training for operator and technical supports.

55

STALL NO.:- H2/D1-3

LANDMARK EXTRUSION & ENGINEERING

Plot No. H-1348 DSIIDC Industrial Area, Bawana, New Delhi - 110 039 New Delhi, INDIATelephone: 011-27384330 Fax: 011-45823300E-mail: landmarkextrusion@gmail.com, info@landmarkextrusion.comWebsite: www.landmarkextrusion.com

ContaCt Person: Mr. sudesh GuPta ProP.

Plastic Processing Machineries, Specially in Complete Compounding Solutions. Dispersion Kneaders with extruder for Filler & Masterbatch. Twin Screw Extruder for Engineering Plastics, Masterbatch, screw Elements, Barrels & Shafts for all types of Twin Screw Extruder, Semi Auto packaging Machines, High Speed Mixers, Strand Pelletizers. Air & water Ring Pelletizers for Twin Screw Extruders. Bobbin Cutting machine for Woven Sacks.

STAND NUMBER: H2/B3-3

LIGUM SPOL S R.O.

M.Svabinskeno, 466 05 Jablonec nad Nisou, Czech Repulic.Telephone: +91 11 30882443 /44 E-mail: bhupendra.ks@insightwithin.com Website: www.insightwithin.com

ContaCt Person: Mr. bhuPendra sriVastVa - direCtor (sales)

INSIGHT Communications –a professional organization that has steadily grown to become India’s largest dealer for Graphic Arts equipment sales. Insight was founded in 1991 in Mumbai for selling prepress equipment from Linotype Hell and Ultre. Insight partnered with Scitex in 1995 and since then, it has been a leader in selling prepress solutions. The largest number of Dolev Imagesetters, flatbed scanners and workflow solutions has been sold in the Indian market. When CTPs came in, Insight was one of the first to get of the blocks and sold the first thermal CTP to Pragati Offset, Over the period of time, Scitex became CreoScitex, then Creo and finally Kodak. Insight’s association with this group is now 17 years old. Insight has maintained the leadership position in prepress equipment for around 15 years now.INSIGHT partnered with Scitex at the very beginning of their digital journey to make it the number one Wide-format Brand in India. INSIGHT was successful in installing and maintaining close to 15 Scitex products in India including Grandjets, XLJets, Idanit, Turbojets and Corejet. It became the leader in the high end Large format industrial machine sales. Scitex Vision was bought over by HP and it became HP Scitex thereafter.

56

STAND NO:1701

LONG DURABLE MACHINERy CO., LTD. No. 181, Lin Tzu, Lin Tzu Lee, Tounan Chen, Yunlin Hsien, TaiwanTel: +886-5-5955906 Fax: +886-5-5955878E-mail: longmach@ms23.hinet.net; long.durable@msa.hinet.netWebsite: www.longdurable.com.tw

ContaCt Person: Ms. ViVi lin sales

ProduCts:Fully Automatic L-sealer, Fully Automatic Sleeve Type Sealer, Shrink Tunnel, Bag Inserter, Automatic Box Erector, Fully Automatic Mushroom & Sliver Vegetable Packaging Machine, Automatic Palletizer, Cups Packing Machine with Counter , Full Line of Packaging Equipment

STAND NO.: 1600

LUNG MENG MACHINERy CO., LTD.

20, Huan Kung Road, Yung Kang Ind. Area, Tainan, TaiwanTel: +886-6-2031179 / +886-6-2321126 Fax: +886-6-2031178E-mail: lung1021@ms36.hinet.net ; sales@lm-hq.com Website: www.lm-hq.com

ContaCt Person: Mr. iVan Pan

ProduCts:Lung Meng Machinery is one of the leading and professional manufacturers in Taiwan. We provide a variety of plastic machinery, including blow film extruder, printing machine, bag making machine, recycle machine and Stretch film whole plant equipment.

57

STAND NUMBER: H2/D-1

MANIAR INJECTOPLAST PVT. LTD.,

187/62, TIRTHANKER ESTATE, GOGTEWADI, GOREGAON EAST MUMBAI ,INDIA Telephone: +91 22 29275563. Fax: ...+912229275563 E-mail: maniarinjectoplast@dmail.com Website: www.plasticparts.in

ContaCt Person: Manish Maniar - direCtor

Company Profile: we are ISO 9001-2008, certified Manufactures for customized plastic parts and components with assembly and printing. We offer high quality customized plastic parts, we have in house tool room setup for making mold and prototype molds. We also offer specially blended plastic materials for various uses and technical requirements of the end components. We offer metal inserts for the plastic components.

STAND NUMBER: H2/ C1-1

MARGO INDUSTRIES

52/7/1, NR. ADARSH ESTATE, CHAKUDIYA MAHADEV ROAD, RAKHIAL, AHMEDABAD , INDIA Telephone: 079 2274 0533E-mail: mukesh.patel@margoindustries.commargoindustries@hotmail.comWebsite: www.margoindustries.com

ContaCt Person : Mr. MuKesh Patel - head – MarKetinG

We are one of the leading Manufacturer of Plastic Processing Machinery….

1. PVC Pipe Extrusion Plant 2. HDPE Pipe Extrusion Plant 3. Pipe Down Streams ( Post – Ex )4. Hopper Loader 5. Semi – Automatic Material Handling System 6. Liquid Dosing and Weighing System 7. Vacuum Conveying System8. Under Water Pelletizing SystemSpares for High Speed Mixer, Pipe Extrusion Plant and Systems

58

STAND NO.:1913

MERSEN ISTANBUL

Gosb Ihsan Dede Cad.900, Gebze, TurkeyTel.: + 90 262 751 02 62 – Ext 351 Fax: + 90 262 751 02 68Email: leyla.senol@mersen.com website: www.mersen.com

Global expert in electrical specialties and graphite-based materials, Mersen designs innovative solutions for its clients’ specific needs and enable them to optimize their manufacturing process in sectors such as energy, transportation, electronics, chemical, pharmaceutical and process industries.

Mersen holds leadership positions in two major areas of expertise: materials and electrical. We offer a range of equipment based on graphite and high-performance materials, including reactive materials and silicon carbide - for extreme industrial environments that require resistance to high temperatures and corrosion. Our electrical solutions and services for motors and generators contribute to the safety and performance of electrical installations and power electronics.

STAND NUMBER: H2/D-5

MITSU CHEM PVT LTD

Address: 329, Gala Complex, Din Dayal Upadhyay Marg, Mulund (West), Mumbai - 400 080, IndiaTelephone: 022 – 25920055 Fax: 022 - 25920077Email: manish@mitsuchem.com, noor@mitsuchem.com

ContaCt Person: Mr. Manish dedhia

Mitsu Chem Pvt Ltd is one of the leading manufacturer of blow & injection Moulded articles in India. We are into manufacturing of Industrial Plastic Containers i.e. Packaging Material,Hospital Furniture Parts, Medical Devices, Automotives Parts and other plastic custom moulded parts. We are an ISO 9001:2008 certified company having 2 manufacturing units in Tarapur, Maharashtra India and 1 plant at Rudrapur, Uttaranchal, India.

59

STALL NUMBER: H-2/ C2- 3

MLA INDUSTRIES

111/230, Harsh Nagar, Kanpur - 208 012Uttar Pradesh, IndiaPosition: Telephone: 0512 – 2555292 / 9336230078 / 9336116592Email: nishant@mlagroup.com Website: www.mlagroup.com

ContaCt Person: Mr. nishant behl - business head

Manufacturers of Speciality Additives like Metallic Stearates (Zinc/Calcium/Aluminum), PVC Heat Stablizers (Lead/ Ca-Zn Based), Precipitated Silica, Blowing Agent – Azodicarbonamide (ADC), Speciality Minerals (China C;lay, Talc, Barytes etc.) And PE Wax.

STAND NO: 710

MM9 INTERNATIONAL DMCC

Jumeirah Lakes Towers (JLT) #2005 - Indigo Icon Tower,Dubai- UAETel; +97144327427 Fax:+97144327426 Email: kevin@mm9international.comwebsite: www.mm9international.com

2008 was the year of path-breaking revolution in the plastic raw materials industry. It was the year of inception of a proprietorship firm, now known as MM9 International founded by Mr. Minesh Shah (Chairman). Carrying this legacy forward with his diligent dynamism is Mr. Kevin Shah (Director) who has set new benchmarks in the industry. MM9 International DMCC is an International leading Exporter/Supplier company specializing in Polymer materials such as HDPE, LDPE, LLDPE, EVA, SBR, PBR etc. used in both plastic and chemical products. Our entire distribution capacity is focused on customers in the state areas of Korea, China, India, Thailand, Hongkong, Singapore, Saudi Arabia and India. Geographically, established sales offices in India, and Middle East. Guided by strong values and principles of quality, reliability, commitment, on time deliveries and cost effectiveness. All these factors have emerged as the core strength for our company, resulting in an ever increasing number of overseas and domestic suppliers. Our highly skilled staff, strong infrastructure, eminent suppliers are factors that make is reliable supplier of all ranges of plastic raw materials.

60

STAND NO: 635

MAROC EXPORT (MOROCCAN CENTRE FOR EXPORT PROMOTION)

23, Rue Bnou Majed El bahar, Casablanca, MoroccoTelephone: +212 522 302 210 Fax: +212 522 301 793E-mail: rhaouti@marocexport.gov.ma Website: www.marocexport.gov.ma

ContaCt naMe: nadia rhaouti - seCtorial ManaGer

Maroc Export (Moroccan Centre for Export Promotion) is a public organization, under the auspices of the Moroccan Ministry of Industry, Trade Investment and Digital Economy.

• Implement the national promotion strategy of export development• Promote the ‘Made in Morocco’ branding• Provide support and guidance to Moroccan companies regarding their export activities and promote their business potential• Develop training programs for potential exporters and build up their abilities in global markets• Improve marketing competitiveness of Moroccan companies in foreign markets• Promote and encourage international business cooperation between Moroccan and foreign enterprises• Act as an information center about foreign markets

STAND NO: H4-1048

MULTI TRADE GROUP

D4/Saif Zone, Sharjah, UAETel:+971 6 5570135 Fax:+971 6 5570136Email:asif@multitradegroup.com Website:www. multitradegroup.com

ContaCt Person: asif ahMed butt

Multi Trade Group is trading in various raw materials for plastics and rubber industry. It is also manufacturing PVC compounds, PVC pipes, PVC fittings and injection molding items mainly crates, industrial pails, construction buckets, 5 gallon water caps and bottles. We are able to do job work production for injection molding items.

Products on display:Injection molding items, PVC fittings, rubbers, EPDM, Plastic raw materials, Plastic Molds, PVC compounds for cables and pipes, TPR invoice, 5gallon water caps, buckets and construction buckets.

61

STAND NO: 635

QATAR CHEMICAL AND PETROCHEMICAL MARKETING AND DISTRIBUTION COMPANy (MUNTAJAT) Q.J.S.C.

PO Box 24445, Doha, QatarT +974 402 11000 F +974 402 11612D +974 402 11095 M +974 33 102070W www.muntajat.qa E homsi@muntajat.qa

ContaCt Person: bahjat hoMsi CoMMuniCations sPeCialist

Qatar Chemical and Petrochemical Marketing and Distribution Company (Muntajat) Q.J.S.C. is a state-owned company established in late 2012 in the world’s emerging chemicals hub, Qatar. Muntajat is responsible for the marketing and distribution of most of the country’s 10 million tonnes of chemicals and petrochemicals.

Muntajat, which means ‘products’ in Arabic, symbolises the diversity of the chemical and petrochemical product offerings, while the company’s corporate logo depicts an arrangement of the three key products marketed by Muntajat: chemicals, polymers and fertilisers.

The company aims to represent, serve and promote the State of Qatar’s chemicals, polymers and fertilisers and maximise value for its stakeholders by providing the world-class products and services customers need to maintain their competitive advantage.Muntajat is working towards achieving Qatar National Vision 2030 by contributing to social, human, economic and environmental development and the creation of a diversified knowledge-based economy.

The company builds on more than 40 years of excellence by Qatar’s producing entities. It is adding new value to the supply chain through reduced lead times and enhanced customer experience while retaining continuity of supply and world-class quality that customers demand.

Across its network, Muntajat employs a multi-national workforce, eventually numbering more than 400 experts, with 250 employees in its headquarters in Qatar and 150 in “Muntajat B.V.”, its global marketing company to service its customers in more than 120 countries.Muntajat is currently developing a strong footprint across the globe, through “Muntajat B.V.”, which is in the process of establishing up to 36 local marketing offices in strategic cities globally to serve local customers and customers in nearby countries. “Muntajat B.V.” recently announced the opening of five marketing offices, in Jordan, Australia, South Africa, Malaysia, and Turkey.

With vast resources, world-class products and a dedicated team of experts, Muntajat guarantees safety, reliability and quality to its global customers.

62

STAND NO: 33

My UAE GUIDE

22ND Floor, 308-310 High Street, Stratford E15 1AJLondon UKTel: + 44 207 242 1855 Email:Sandra@myuaeguide.com Email: WWW.myuaeguide.com

ContaCt Person: sandra diaConesCu MKt ManaGer

MyUAEGuide is the biggest portal for local business, events and city information. It hosts over 10,000 properties, cars and job offers!

270,000 businesses are already listed on www.myuaeguide.com!The website is not only being promoted via various online search engines, social networking sites, but also at the trade exhibitions in the UK,UAE and worldwide.

STALL NO.: H2/A2-1

N A CORPORATION (NAROTO)

Naroto House, 3725, Phase Iv G.I.D.C. Vatva, Ahmedabad , IndiaTelephone: +91-79-25840374 Fax: +91-79-25840809www.naroto.com

Naroto Offers Plastic Water Tanks Making Machinery & Moulds Suitable For Vertical & Horizontal Shape Tanks, Road Barriers Etc...

Capacity: 200 Ltr. To 40000 Ltr. Max.Main Machines For Making Water Tanks: Biaxial: 3 / 4 Arms. Shuttle: 2 / 3 / 4 Stations Rock N Roll: Open Fired / Closed Oven Type.Ancillaries... Extruder (For Granule Coloring & Recycle) Pulverizer ( For Powdering) Scrap Cutter And GrinderFollowing Is More Information For Our Company... Infrastructure Spread Across 12000 Sq Mtrs. Exports To 70 Countries, With Highest Exports To Gulf Region 880 Customers World Wide

63

STAND NUMBER: H2/A3-3

NARENDRA GRAVURE PVT LTD

Plot no 4, Sector 4, Faridabad - 121004, Haryana, INDIA Telephone: 09312585292 Fax: E-mail: rajiv@narendragravure.com Website: www.narendragravure.com

ContaCt Person: Mr. raVi aGarwal - MarKetinG head

Company Profile: Narendra Gravure Pvt. Ltd. is a renowned name associated with the quality works, has marked its consistent presence in the world of printing & packaging. Designed with sheer passion that makes them class apart and the leading work broses of the industry. We truly believe that customer is king & render great significance to achieving total customer satisfaction through our revolutionary print & packaging solution.

STAND NO: 40

NATIONAL PINK PAGES (DAR AL FAJR)

Telephone: +971 4 2228700 Fax: +971 4 2247847E-mail: arbinfo@eim.ae Website: www.pinkpages.ae

ContaCt Person: Mathew KoshY - sales & MarKetinG ManaGer

Pink Pages UAE - Ever since its launch in year 1992 the Pink Pages has become popular in the UAE and neighboring countries and soon it turned out to be the preferred business directory among both the Individual and Business audience.

It is the only comprehensive directory with varied section to meet the needs & requirements of the business community. Accepted as the best reference guide in the region. Pink pages is also available in CD & the Web and the online version is updated regularly and contains only the current relevant data.

64

STAND NO.:1602

OSG ASIA PTE LTD

No60, Kaki Bukit Place#08-19, Eunos TechparkSingapore -415979Tel: +65 6844 4350 H/P:+65 8218 5821 Fax:+65 6844 4351Email: raman@osgasia.com.sg Web: www.osgasia.biz

ContaCt Person: Mr. raMan PandiYan

OSG has strived to become World No.1 Company with our technology and united marketing Strategy over 75 years since 1938.

OSG is a comprehensive cutting tool manufacturer specialized in the manufacture and sales of taps, end mills, drills, inserted toolings and rolling dies.

Starting in the year of 1962, we enthusiastically have broadened the global business and declared “Global Company”. Now, we do business in 40 places around the world.

As OSG theme called “Tool Communication” this will bridge country to country, industry to industry through our tool. We will move forward to establish Global Company by providing the best tool to you.

65

STAND NO: 94

PACKAGING MEA

Unpacking the world of packaging PO Box 391186, Dubai,United Arab EmiratesPhone +971 4 387 3575 Mobile +971 55 109 1889 Email: ben@packagingmea.com www.packagingmea.com

ContaCt Person: benjaMin daniel Chief editor

Packaging MEA is the first technology-oriented B2B publication to focus on the packaging industry here in the MEA region. We cover a wide range of applications within packaging and converting. Packaging MEA offers an engaging mix of articles covering innovative applications, new products, machinery, technology and materials.

Alongside technology and business features, the magazine also provides regional and international news and reports on markets, products, services and events. Packaging MEA consistently delivers stimulating insights and opinions from authoritative industry figures, primarily professionals in the MEA region but also members of the wider global packaging fraternity.

The magazine gathers the views and experiences of brand owners, converters-printers and equipment manufacturers to give its readers practical know-how and a solid understanding of trends and developments within the industry. Packaging MEA also provides a forum for professional dialogue within the packaging fraternity.

66

STAND NUMBER:

PAGDER- TURKISH PLASTICS ASSOCIATION

Turgut Reis Mah. Barbaros Cad. İstanbul Ticaret Sarayı Ofice No: 293 3448,Istanbul,TurkeyTel:+90 212 438 26 19 Fax:+90 212 438 15 93E-mail: gizem.gurel@pagder.org Website: www.pagder.org

ContaCt naMe: GizeM Gurel - eVents Coordinator

Established in 1969, to gather the Turkish Plastics Industry under the same umbrella, PAGDER Plastics Industrialists Association, has been successfully implementing its mission for more than 40 years.

PAGDER- Plastics Industrialists Association, is the most efficient Non Profit Organization in Turkish plastics and plastic processing machinery industry.

Not only for the countries which are leader in Plastics and Plastics processing machinery industry but also for the target countries which are potential martkets for our industry, PAGDER organizes exhibition participations and sectoral visit programmes for Turkish Plastics Industry.

Establishing technical, commercial and educational relations with the industry associations in these countries, PAGDER introduces member’s and Turkish plastics industry‘s high-tech capability to these global markets.

PAGDER, work for solving the problems, result from economical situation and the applications of political authority, develop solution proposals for the general problems of the industry and carry these proposals to the related platforms.

According to its mission, PAGDER prepares enviroment to its members with the power of synergy; to improve the whole Turkish Plastics industry and to make world’s one of the leading production and supply center.

67

STAND NUMBER: H2/B4-4

PAPRO INDUSTRIES

Plot No 3A, Unit no 18, Udyog Nagar, S.V.Rooad, Goregaon West Mumbai, IndiaTelephone: +91 22 28784786 Fax: +91 22 28726793E-mail: irfan@paproindia.com Website: www.paproindia.com

ContaCt naMe: irfan babla - direCtor

Company Profile: PAPRO Innovation beyond Imagination Décor your product through Hot Stamping, Heat Transfer & In-mold Labelling Papro, the name synonymous with quality design and printing now aspires to also become the name preferred for everyone’s printing!

STALL NO.:- H2/A-1

PARADEEP PLASTIC PARK LIMITED

IDCO TOWERS, JANPATH, BHUBANESWAR, 75102 BHUBANESWAR Country: INDIATelephone: +91-0674-2541766, 2542869 Fax: +91-0674-2540820E-mail: cmd@idco.in,pmu@idco.in Website: www.idco.in

ContaCt Person: Mr. brundaVan swain - direCtor

Paradeep Plastic Park limited (An SPV of IDCO, Govt of Odisha PSU)Paradeep Plastic Park is being developed on a 120 Acres land parcel at port city Paradeep to facilitate various downstream plastic industries by Paradeep Plastic Park Limited, an SPV of IDCO (Govt. of Odisha PSU). This is located from 115 kms from State capital, Bhubaneswar. Nearest Rail head is just 3kms and Port connectivity is 10kms, just besides the IOCL’s 15 MTPA refinery project making it very strategically located project. The project shall house plastic products evaluation Centre (PPEC) with testing facility, processing hall/shop floor, tool room, design and product development facility with stimulation and evaluation support, trainings and skills up-gradation facilities, raw material stores, warehouses, logistic support facilities etc along with the various individual units. This park has been developed by Govt. of Odisha under Department of Chemicals and Petrochemicals, Govt. of India under “Plastic Park Scheme” of the department and is under PCPIR Paradeep region. Along with State Govt agency (IDCO), Central Institute of Plastic and Engineering Technologies (CIPET) is also involved in this project.

68

STALL NO.: H2/A3-5

PLASTINDIA FOUNDATION

401-B, Landmark, 209 A, Suren Road, Off Andheri Kurla Road, Andheri East, Mumbai – 400093 , India.Tel. : +91-22-26832911upto 14 Fax : +91-22-26845861E-mail : plastindia@vsnl.comWebsite : www.plastindia.org , www.plastindiafoundation.org

Ms. MaMta oza - Chief MarKetinG & exhibitions ManaGer

Company Profile: Plastindia Foundation is the apex body of major associations, organizations and institutions connected with plastics, with common objectives to promote the development of plastic industry and to assist the growth of plastics and related materials and their products. The Foundation is dedicated to the national progress through plastics.

STAND NUMBER: 1010

PLASTECH INTERNATIONAL FZC

P6-063, SAIF ZONE, SHARJAH, UNITED ARAB EMIRATESTelephone: 06-5579160/61 Fax: 06-5579162E-mail: plastechdubai@gmail.com Website: www.plastechintl.com

ContaCt naMe: ChandrasheKhar Patil - ManaGer

Plastech International FZC (PTI) is a Dubai based customer focused organization dedicated to deliver high Quality solution for Plastic Industry and is committed for supplying Quality Products and Services at the most Competitive prices.

PTI’s vision is to expand and have a Global presence by ensuring clients growth and Satisfaction by providing wide range of Quality Products for Plastic Industries.

Emphasis on Quality, On time delivery and Excellent Customer Support are the prime factors for our Organization’s emergence as the region’s foremost supplier of Plastic Machinery, Equipments and Services.

Our product range is as below :- Injection Moulding Machines - SHINI Ancillary Equipments - Injection & Blow Moulds- Blow Moulding Machines - Complete PET/PVC Projects - Technical Services.

69

STALL NO.:- H2/A4-3

PLASTEMART.COM

123, Nirai Industrial Estate, Mahakali Caves Road, Andheri (E), Mumbai, INDIATelephone: +91 22 61291300, +919930304565E-mail: sales@plastemart.com Website: www.plastmart.com

ContaCt Person: Mr. lalit shah ManaGinG direCtor

Buy and sell used plastics machinery, recycled plastic material, moulds anddies. Jobs portal and placement services for plastic industry. Website customized ERP for plastics moulding industry. Global B2B Website for international advertising and promotion of plastic products, machines, raw materials, masterbatches and additives.

STAND NO: 34

POLyMERMIS/VISTAWEBSOFT

405, DURGA, A-8 Veera Indl. Estate,Off Veera Desai Road, Behind Balaji Telefilms, Mumbai ,India Telephone: +91-22-26736570 Fax: +91-22-26736522E-mail: sanjay@polymermis.com Website: www.polymermis.com

ContaCt Person : sanjaY aGarwal - direCtor

PolymerMIS ( Polymer Market Intelligence Sources) provides SMS, Whatsapp, BB, Android, ios & Web based alerts for a wide range of Petrochemical Products like PP, HDPE, LDPE, LLDPE, EVA, PVC, PET, ABS, SAN, GPPS, HIPS etc. and Feed stocks including Naphtha, Ethylene, Propylene, EDC, VCM, Styrene Monomer, Aromatics and Petrochemical Intermediates. We bring to you on the Real time basis with Breaking News as it happens, including Market Trends, Quotes, Moves, Analysis, Data, Predictions and much more. We provide everything you need to know to stay informed and react to changing market conditions of Plastic Industry worldwide.

70

STAND NO:77

POLyMER & PACKAGING INTERNATIONAL MAGAZINE

Room No. 706, Business Plaza, Mumtaz Hassan Road Karachi ,PakistanTelephone: 00 92 21 32461722 Fax: 00 92 21 32410723E-mail: akbar@thesis.com.pk Website: www.thesis.com.pk

ContaCt Prson: aKbar baseer Khan business deVeloPMent ManaGer

Polymer & Packaging International is a quarterly magazine published from Karachi, Pakistan. The magazine aims to facilitate industrial stakeholders in achieving their business objectives by acting as a focal point and helping bridge the gaps between local and international clients by providing insights necessary for the ultimate growth of the industry.

STALL NO.:- H2/B4-3

POLyMERUPDATE.COM

344, A to Z Indl. Estate G.K. Marg, Next to Peninsula Park, Lower Parel, Mumbai - 400013 IndiaTelephone: +91-22-61772000 (25 Lines) Fax: +91-22-61772025E-mail: neeraj@polymerupdate.com Website: www.polvmerupdate.com

Contact Person: Mr. Neeraj Rawal COO & Vice President (Mktg)

Company Profile: We are a news and media company headquartered in India that specializes in providing market-moving information and pricing data on petrochemical products and industrial polymers. Backed by years of extensive experience in garnering and providing business-critical content, our information portal is much coveted by a vast readership that spans across 60 countries. Our trusted pricing methodology is considered as a benchmark across South Asia. We have joined hands with Platts—a division of The McGraw-Hill Financial—to publish Joint Reports for PP, PE and PVC. We are first in the world to develop mobile applications for polymer news & prices.

71

STAND NUMBER: H2/B2-1

PRAKASH PLASTIC INDUSTRIES

Plot No. 5, Navnit Shah Industrial Estate, Survey No. 259/1/1, Village - Dadra (D & NH), Silvassa (UT.) , INDIA Telephone : +91 9820195032 E-mail : ppiexports@gmail.com

ContaCt Person : Mr. rahul bhiMrajKa - Partner

Company Profile: PRAKASH PLASTIC INDUSTRIES is one of the leading manufacturers of HDPE/PP Woven Fabric, Bags/Sacks, Multicolour Printed BOPP Laminated PP Bags, Paper Laminated HDPE/PP Bags, Jumbo/FIBC Bags & Tarpaulin. We are having our manufacturing facilities at Silvassa, India. We are processing 7500 M.I of Granules per Annum. Our Total Production Capacity of Finished Goods is 600 Lakh Bags per Annum.

STAND NUMBER: H2/D1-4

PRONTO TECHNOTEX, NEEMUCH, M.P., INDIA

RATHOUR PARISAR, VEER PARK ROAD NEEMUCH, INDIATelephone: +91-97.526.526.52 E-mail: info@prontotechnotex.com

ContaCt naMe: aMitesh rathour- direCtor

Company Profile: Pronto Technotex is a private limited company registered with ROC-MOCA, Govt of India. It offers a wide range of packaging solution made of PP/HDPE woven products including small bags, leno bags, laminated bags, BOPP bags, Jumbo bags, tarpaulins, etc.

It has most modern machines and best in class infrastructure based in central India. The company is managed by professionals with vast Business and Industry background. The company sincerely follows three code of commitment towards – Quality, Compliance and Social Responsibility.

It caters to variety of industry including cement, fertilizer, chemical, food grains. Some of its existing clients include a large cement manufacturer, a large additive manufacturer, yarn-to-fabric integrated textile unit.

72

STAND NO: 92

PRINTEX - HAMBURG GMBH

Huetten 59,20355, Hamburg, GermanyContact Person: Heinz Position CEOTelephone: 0049 171 5075759 Fax: 0049 5246 8425E-mail: heinz@printex-hamburg.de

Printex - Hamburg is offering second hand overhauled german plastic processing machinery for the thermoforming industry with garantee like ice cream cups, jogurt cups, margarine tubs etc. out of ps, pet, pp etc. Spcialisation is off set cup printing machines up to 8 colours. installations, start up and training is part of service.

It offers also know how & joint ventures cooperations with german partners in the plastic manufacturing field.

STAND NUMBER : H2/B2-4

RR PLAST EXTRUSIONS PVT. LTD.

Corporate Office: B-3, Nand Jyot Ind. Estate, Safed Pool, Sakinaka,Andheri (E), Mumbai, India. Cell No. :0091-9821666114, 0091-9967023161 Telephone : +91 – 22 42461513 / 42461515 Fax : +91 – 22 28509603 E-mail : info@rrplast.com; sales@rrplast.com Website : www.rrplast.com

Contact Person: Mr. bhushan sonar - sales head

Company Profile: Plastic Extrusion Machinery mfg & Exporter,1. PP HIPS Multilayer Sheet Extrusion Plant.2. Pet Sheet Extrusion Plant.3. PS/ABS/PC/PMMA/HDPE/LDPE/EVA/S PVC Cable TileSheet Making Plant(width up to 2.Smtr, thickness up to 40mm & up to lton/hr).4. PP Stationery /Decorative Sheet Making Plant.5. Round Flat Drip Irrigation Pipe Making Plant6. 2Stage Vented Re clin Plant (Strand Pelletizing type or Die Face Cutting type).7. Compounding Plant for Roto Moulding application.8. HDPE /PPR Pipe Extrusion Plant.9. Plastic Pencil (Wood Free) Making Plant10. D /F Pen Refill Lollypop Stick Making Plant

73

STAND NO:1551

REACH ADVERTISING & PUBLISHING

ADDRESS: P. O. BOX 45477, SHARJAH, UNITED ARAB EMIRATES.Tel : 00971 6 5454500 Fax : 00971 6 5453900Email : reachrbd@eim.ae Website : www.reachuae.com

ContaCt Person: jesu das abrahaM General ManaGer

“Reach Buyer’s Digest” is propelled by the research conducted by us over the years. Findings from the research reveal that the market lacks any publication, which categorizes brands as per their activity. Reach Buyer’s Digest (RBD) is a ‘one & only one’ publication of its kind. It is distinct from other similar publication because of its unique characteristic, i.e. Brands are classified based on the product activity.

Our Graphic Division provide: - Designing & Printing Solutions, Exhibitions & Events & Complete Multimedia & Web Solutions.

STAND NO: 25

RINGIER TRADE MEDIA LTD

9/F.,Cheong Sun Tower, 118 Wing Lok Street, Hong Kong City: Sheung Wan,Hong Kong Telephone: 852 23698788 Fax: 852 2869 5919 E-mail: amberchang@ringier.com.hkWebsite: http://us.industrysourcing.com/

ContaCt Person : aMber ChanG MarKetinG exeCutiVe

International Plastics News – Middle East & Africa has established itself as a leading source of exclusive content and technical articles prepared and written by a team of editorial and industry experts from Ringier Trade Media. The print magazine, its electronic newsletters and vertical, digital e-magazine and fully interactive magazine Apps with video links on iTunes and Google Play, reach decision-makers in the plastics and rubber industry of Middle East and Africa, and other parts of the world.

74

STAND NO:635

ROTOMOULAGE DU SUD

30 ROUTE D’ AGADIR,TIZNIT 85000,MOROCCOTEL: 212 528 601 409 Fax: 212528601401Email: roto@menara.ma ; ms.roto@gmail.com

Rotomoulage Du Sud(RMS) offeres intergrated services in design, conception and manufacturing of specialized plastic parts made with a roto molding process. Our intergrated service (from design to assembly) allows our customers to benefit from reduced time and cost for development and molding of plastic products. The unique strength of RMSis its expertise and its ability to develop plastic products for its clients to add a plus value.

STAND NUMBER: H2/C2-1

SAI MACHINE TOOLS PVT. LTD.

Plot No.23,Sector”A”, Sanwar Road Industrial Area, Indore - 452 015452 015, INDIA Telephone: 0731-4081200 Fax: 0731-4081222Email: saimachinetools@hotmail.com,smtpl@sancharnet.inWebsite: www.saimachinetools.com

ContaCt Person : Mr. ashoK jaiswal- direCtor

Manufacturing and Exporter of excellent Plastic Extrusion plast and machineries, such as drip Irrigation tube extrusion plant, HDPE pipe plant, PPR Pipe plant. Screw RPVC pipe plant, PVC/HDPE/HMHDPE/LDPE/LLDPE/HIPS BLOWN PVC Compounding Mixer, Grinder, Granulator and all types of Pre and Post Extrusion Equipments.

75

STAND NO.:1601

SAN TUNG MACHINE INDUSTRy CO., LTD.

No. 29, Ming An Rd., Xin Zhuang Dist., 24256, New Taipei City, Taiwan Tel: +886-2-29036445 Fax : +886-2-29044359E-mail: stmi@ms27.hinet.net Website: www.santung.com

ContaCt Person: Mr. Chih ChunG, Yau

We are a primary manufacturer of automatic packing machines. Our manufacturing plant has specialized in packing various products, such as jelly, juice, yoghurt, ice cream, mineral water, sauce, sugar, salt, rice, etc. We established in Taiwan since 1977 over 35 years. We also produce 5 gallons water caps heat sealing machine and foam, plugs, caps assembly machine. First-rate service, competitive prices, and best after-sales service have always taken priority and have gained the confidence of our clients worldwide. Please visit our website at www.santung.com for more details. We look forward to the establishment of a future account with you in the near future.

STAND NO:820

SHEIKH KHAJOO BHAI & CO. PAK.

Head Office: 51/C, Commercial Street #12, Phase-II, Ext. D.H.A., Karachi P.O. BOX: 4837, Pakistan.Tel: +92-21-35800653-754-55 FAX: +92-21-35882680Sheikh Abdul Wahab Cell # +92-333-2151408 Email: info@khajoobhai.pk & sales.skbco@gmail.comWeb: www.khajoobhai.pk

We provide all kinds of Complete Packaging material and Machinery, We manufacturing and imported from different countries and introduce new technology in our region. We take the opportunity to introduce our organization as one of the pioneer companies in U.A.E in the field of Packaging Machinery and Packaging Materials.

We are serving in Textile Industries, Garments, Leather Garments, Denim Industries and Hosiery Industries, Food Industries, Airlines, Pharmaceutical Industries, Beverage Industries, Lubricant Industries, Engineering Industries, Cooking Oil Industries, and providing them finish product plastic packing solution. Latesttechnology base Machines and Material.

76

STAND NUMBER: H2/B3-6

SHREE KRISHNA INDUSTRIES

215, PUSHPAK IND ESTATE, NIKA TUBE COMPOUND, PH-1, G.I.D.C, VATVA, AHMEDABAD, GUJARAT , AHMEDABAD , INDIA Telephone: 9377123960, 9824123960 E-mail: info@shreekrishnaind.comWebsite: www.shreekrishnaindustries.com

ContaCt Person : Mr. Manoj PanChal- direCtor

Company Profile: SHREE KRISHNA INDUSTRIES is Screw, Barrel Manufacturing Company located at Ahmedabad [Gujarat]. It is manufacturing and exporting Twin Parallel screw, Twin Conical Screw, Single Screw, Single Barrels, Twin Hole Barrel [Rear Barrel], Twin Barrels [Sleeve fitted Parallel], Twin Barrels [Sleeve fitted Conical], Spares of Injection Molding M/c [Moulding-Machine], Screen changer, Grooved feed bush, Flat Die.

H2/A1-2

SHREE MAHAVIR PLASTICS

Plot No. G-1102, GIDC Metoda, Nr. Murlidhar Way Bridge, Lodhika, AHMEDABAD , INDIA Telephone: 9377123960, 9824123960, 9601853009E-mail: shreemahavirplastic@yahoo.comWebsite: www.shreemahavirplastic.com

ContaCt Person: Mr. MauliK doshi MarKetinG ManaGer

We Are Leading Manufacturers And Exporters Of Pvc Suction Hose Pipe Since 1995.

Our Market Includes: India,U.A.E,Sri Lanka,Saudi Arabia,Iran,Iraq,East Africa,South Africa,Turkey,Tanzania,Ethopia,Dubai,Qatar,Kenya,Jordan,Tanzania And Much More.

We Export To More Than 25 Countries.We Are Pioneers In The Field Of Pvc Hose Pipe Since More Than A Decade And Are Constantly Improving On The Same.

Company Focusses On Achieving Higher Goals With Better Quality Which Can Be Achieved By Automatic German Developed Machines.Our Pvc Hose Pipes Are Widely Used In Agricuture For Suction And Delivery Purpose.

77

STAND NUMBER: H2/C3-2

SHREE POLySHRINK

PLOT NO: K/1-232/4B, ROAD-E2, B/H.ANTECH FURNITURE,AJI GIDC, RAJKOT-360003, RAJKOT (GUJARAT), INDIA Telephone: +91-281-2384621 Mob : +919898111003 E-mail:shreeshrink@gmail.com Website: www.shreepolyshrink.com

ContaCt Person: Mr. nilesh saGPariYa - owner

Company Profile: Shree polyshrink is one of the professional PVC plastic packaging materials manufacturers in India. Our company has been the provider of different kinds of PVC plastic packaging materials for many international well-known enterprises and gained good reputation in the industry. Our company is among the top ones in the industry for excellent product quality and the scales. We are manufacturing pvc shrink film and pvc shrink label for different kind of uses. For these we are using high technology imported machinery. Different kind of fully automatic machine gives good performance then our product quality is excellent. All of operation for shrink label is in house.

78

STAND NUMBER: H2/ C1-4

SHREE RADHEKRISHNA EXTRUSIONS PVT.LTD

C1-4509, PHASE- 4, GIDC, VATVA, AHMEDABAD, INDIATelephone: 079 25841785 Fax: 079 25841141E-mail: rajesh@radhekrishnaexports.comWebsite: www.radhekrishnaexports.com

ContaCt Person: Mr.rajesh Gohil- MarKetinG - head

We are Established since 1992, having the state of art manufacturing facility located at Vatva, Ahmedabad in the Plot area of 1500 Sq.m. This plant is equipped with fully CNC Thread Milling Machine (3 mtr. Long), C.N.C Deep Hole Gun Drilling Machine, Gas Nitriding Furnace (4 mtrs.) and other modern machinery. Most advanced manufacturing process technology, precision machinery, most stringent quality control standards and passion for new developments with the Continuous Research and Development has taken the company to a new horizon. We believe in “ZERO DEFECT”. A new generation product with highest customer satisfaction has been resulted in phenomenal growth of the company. Our 70% market share in this industrial segment has made us “MARKET LEADER” amongst all other player in Domestic as well as overseas market. Our motto is “CUSTOMER DELIGHT”. Trust , you will our name and will give us chance to prove ourselves as your preferred suppliers to satisfy your all needs related to plastic processing machinery for your plant.

Our Screw & Barrel: Single/ Twin Screw And Barrel for Plastic Processing machinery and High Speed Mixers & Components.

STAND NUMBER: H2/C1-2

SHyAM PLASTIC INDUSTRIES

C-1/4412, GIDC Vatva, Ahmedabad, IndiaTelephone: +91079-25840144 E-mail: info@shyamplastic.in Website: www.shyamplastic.in / www.shyamplastic.com

ContaCt Person: PraGnesh KhaMar - MarKetinG-head

We are manufacturer of PET Blow Moulding Machines ranging from 800 BPH up to 12000 BPH. We are manufacturer of PVC suction &braided Hose Plants.

79

STAND NUMBER: H2/C3-4

SOCIETy OF PLASTICS ENGINEERS

13 CHURCH HILL ROAD , NEWTOWN, CT 06470 USA Telephone: +1 203 775 0471, Fax: +1 203 775 8490Cell Phone: +32 498 85 07 32E-mail: croos@4spe.org Website: www.4spe.org

ContaCt Person : Carine roos euroPean offiCe ManaGer

Company Profile: The Society of Plastics Engineers (SPE) is an individual member organization for plastics professionals, helping people and companies in the plastics industry to succeed by spreading knowledge, strengthening skills and enhancing relationships and networking. SPE is the only place where people from all parts of the global plastics industry can come together around important issues and technologies. Since 1942, SPE has made significant contributions to the technologies and innovations the industry enjoys today. That work continues today with our 15,000+ member global network of leading business people, engineers, scientists and other plastics professionals.

STAND NUMBER: 211

SOHAR INDUSTRIAL PORT COMPANy

Address: PO Box 9, Postal code 327, Sohar, Sultanate of OmanTelephone: +968 26852700 Ext 706 Fax: +968 26652701E-mail:Edwin.lammers@soharportandfreezone.com Website: www.soharportandfreezone.com

ContaCt Person: edwin laMMers Position: CoMMerCial ManaGer

Situated around 200 kilometers from Muscat and providing unequalled access to booming gulf economies, SOHAR is one of the world’s largest Port and Freezone developments. Equipped with deep-water jetties capable of handling the world’s largest ships and with leading global partners operating the container, dry bulk, liquid and gas terminals, the Port and Freezone has achieved unprecedented growth and witnessed investments exceeding $15 billion.

The joint venture, launched in 2002 between the Port of Rotterdam and the Sultanate of Oman provides vision and expertise as well as unequalled access to booming Gulf economies and a home to leading global partners.

80

STAND NUMBER: H2/C-2

SRI SAI PLASTOTECH

Building No.55, Prathna Flats, Ground Floor, L&T Colony, CRR. Puram, Opp. To Manapakam EB Office, Manapakam, Chennai - 600 12INDIATelephone: 09380571101 E-mail: dhaval@ssptindia.comWebsite: www.srisaiplastotech.com

ContaCt Person: Mr.dhaVal bhutt - MarKetinG head

We are one of the leading manufacturers, exporters and suppliers of a wide range of plastic processing machines, auxiliary and other industrial process equipment. These are renowned for high features such as low maintenance and robust construction.

With our valuable experience, we have gained immense domain expertise in offering industrial process equipment. We offer Auxillaries, Injection Molding Machines, Screw & Barrels and Other Products. These are catering to the requirements of construction and engineering related industries. Apart from this, we undertake complete turnkey projects from design to machine selection to production & training.

SSPT has created a mark in the field of Injection Molding Industry in India by supplying high quality Servo Hydraulic & Variable Pump Machine from Demand Machinery works co. ltd., Taiwan. Our company has a state-of-the-art infrastructure, which is equipped with requisite die face cutter vacuum, calibration tank, automatic cutter and semiautomatic socketing machine. These machines enable us is meeting the bulk requirements of our clients. Further, our range also undergoes ultrasonic test and chemical composition test in order to ensure that the machinery we deliver in the market is of finest quality. With our ethical business practices and competitive pricing, we have been able to gain a reputed clientele from all across the country.

Business Specifics:- Based At: Chennai, Tamil Nadu (India)Legal Status: Limited Liability/Corporation (Privately Held)Company Profile: Manufacturer, Supplier and ExporterAnnual Turnover: Rs. 4 Crore (4 Million INR)

81

STALL NO.:- H2/B2-3

STERLING AUXILIARIES PVT LTD

Plot No 30/31 Marol Bhavan, Marol Co Operative Industrial Estate, Near Shemaroo Video, M V Road, Andheri East, Mumbai - 400059 MUMBAI ANDHERI, INDIATelephone: 9820032625 /9920289814 E-mail: sales1@sterling aux.com Website: www.sterlingspec.com

ContaCt Person: Mr MaYur Gharat/ Mr suKuMar Kotian

“We take the pleasure to introduce STERLING AUXILIARIES PVT. LTD,a 25 years old manufacturing company, a well known name in the field of Surfactants, Emulsifiers, Speciality chemicals.We are an ISO-9001: 2008, ISO 14001: 2004 and BS OHSAS 18001: 2007 certified company, Our plants are equipped with reactors of various sizes, ultra modern Q.A with well laid down quality procedures. Our production capacity is to the tune of 65000 MT/Year. We have in our portfolio Chemicals used in Oil & Gas Refineries, Paints, Homecare & Personal Care, Plastic Industry and many more.We make tailor made product as per the customers’ needs. We have a long list of Antioxidants the catalogue is enclosed for your perusal. Please contact us for your requirements, and we offer excellent quality products, with efficient service “.

STAND NUMBER: 1031

SUZHOU FOSITA SCIENCE AND TECHNOLOGy CO.,LTD

Yongli Industrial Zone, Leyu Town, Zhangjiagang , ChinaTelephone 0086-13812859050 Fax: 0086-512-58661008E-mail fosita01@cnfosita.com Website: www.cnfosita.com

ContaCt Person: traCY Chen - sales ManaGer

Suzhou Fosita is a professional manufacturer of all kinds of plastic pipe extrusion Machine (PVC,PE,PPR,PERT,PE-AL-PE pipe extrusion machine),plastic waste Recycling machine (PET bottles,PP woven bag,PE film recycling machine).plastic Granulation production line (PVC hot cutting pelletizing line,PP/PE water ring /cold bracing pelletizing macjhine.We have rich experence engineers and sales.Our company is not only selling machine But also selling after-sale service.Our quality is measured by your professional level.

82

STAND NUMBER: HALL 2/ B1-1

THE ALL INDIA PLASTICS MANUFACTURERS ASSOCIATION (AIPMA)

AIPMA House, A-52, Road No.1, M.I.D.C., Marol, Andheri (East), Mumbai , Pin Code: 400 093, India Telephone: 022 – 67778899/ 28217324 Fax: 022 – 28216390 E-mail: office@aipma.net Website: www.aipma.net.

ContaCt Person: Ms. uMaa GuPta - seCretarY General

Company Profile: The All India Plastics Manufacturers’ Association (AIPMA) established in 1945 is the largest apex body to promote development and growth of Indian Plastics Industry. Spectrum of membership includes all categories of plastics industry spread over 175 cities and towns nationwide. 27 National and Regional Associations are also affiliated to AIPMA.

AIPMA is one of the founder promoters of Plastindia Foundation established in 1987 with an objective of jointly promote interests of Indian Plastics Industry globally, and Nodal Agent for Arabplast Exhibition held in Dubai. AIPMA is Indian partner for PlastPack Africa Exhibition in Kenya/South Africa. AIPMA has representations in various Bodies / Committees of Government of India for promotion of Plastics and Petrochemical industries. Business delegations to Chinaplas Exhibitions, K, Koplas, Taipei Plas, NPE, etc. are organised regularly.

AIPMA concluded 9th International Exhibition & Seminar- PLASTIVISION INDIA 2013, in December, 2013 in Mumbai. Plastivision Arabia – 2014 in Sharjah in April, 2014, and 10th Plastivision India -2017 is announced from 19-23 January, 2017 at Mumbai.

83

STAND NO:639

TRIVENI TRADING COMPANy L.L.C

Umm Ramool, Rashidhiya, Dubai - United Arab Emirates Telephone: 97142863865. Fax: 97142863864 E-mail: manohar@triveni.ae Website: www.trivenipackaging.com

ContaCt Person: Mr. Manohar - General ManaGer

Triveni Trdg Co L.L.C a leading packaging machinery and materials company Having a head office and showroom in Dubai and branches in Kuwait, Oman Bahrain, Qatar etc. specialized in food packaging machine and related end of Line packaging equipments. It offers a wide range of packaging equipments and materials to food manufacturers, food processors and distributors, catering houses and other hospitality industries. At this edition of Plastivision Arabia 2014.

Triveni is exhibiting food packaging and safety equipment such as Metal Detector From CEIA, Italy , Labelling Machine from Italy, Vacuum packaging from Komet, Germany, Shrink Wrapper from MInipack, Italy end Line packaging such as Strapping, Sealing and I Induction Cap sealing machine from USA etc.. Pallet Stret wrapping machine etc will be Displayed for live Demonstration in our showroom.

STAND NUMBER: H2/B3-1

U V TECH SySTEMS

1st Floor, No.24 Dr. Ambedkar Road, Kodambakkam, Chennai - 600 024Chennai , INDIATelephone: 044 - 23726691/93 FAX : 044 - 23726699E-mail: salil@uvtechsys.com Website: www.uvtechsys.com

ContaCt Person : Mr. salil s. nair- ProPrietor

Company Profile: U V Tech Systems is the market leader & total solution provider for the beverage industry, Our product basket includes state of the art semi & fully automatic machinery for treatment machinery, blow moulding machines, bottle filing machines, shrink lable applicators, shrink wrapping machines, fully automatic RFC for 20ltrs jar (5 gallon).

84

STALL NO.:- (NO STALL)

UNIDO ICAMT

CMTI CAMPUS, TUMKUR ROAD BANGALORE, BANGALORE, INDIA E-mail: d.Ballani@unido.orgWebsite: www.unidoicamt.org

ContaCt Person: Mr. deePaK ballan - national ProGraMMe offiCer

United Nations Industrial Development Organisation (UNIDO) is the specialized agency of the United Nations (UN) that promotes inclusive and sustainable industrial development by focusing on poverty reduction through productive activities, trade-capacity building, energy and environment as well as other cross-cutting issues. The International Centre for Advancement of Manufacturing Technology (UNIDO-ICAMT) is an International Technology Centre (ITC) of the UNIDO, promoting inclusive and sustainable industrial development. Under the ‘National Programme for Developing Plastics Manufacturing Industry in INDIA’, in which AIPMA is our key partner, UNIDO ICAMT aims at strengthening the competitiveness of the plastic industry in India by enhancing the manufacturing, technological and market development capacity of SMEs located across its clusters in Delhi NCR, Mumbai, Ahmedabad, Bhubaneswar and Chennai.

NETWORKING EVENT SPONSOR

UNIPLAS INTERNATIONAL EST

P.O. Box No : 60392, Sharjah, U.A.E.Tel: + 971-6-5730167 Fax: + 971-6-5730168E-Mail : uniplas@uniplasinternational.comWebsite: www.uniplasinternational.com

ContaCt Person: Parul dhruVa General ManaGer

We deal with the world’s best manufacturers of plastic raw materials. We have nurtured our relations with the best of Petro-chemical giants based in South East Asia to an extent that we today share their objectives and ideals.

85

STAND NUMBER: 821

UNITED TUBES (PVT) LTD

F – 91, HUB RIVER ROAD, S.I.T.E., KARACHI, PAKISTANTelephone: +92 21 3256 2878 – 79 Fax: +92 21 3256 8144E-mail: tube@cyber.net.pk, tube@livemails.netWebsite: www.tubes.com.pk

ContaCt naMe: abdul rehMan Chawl - direCtor

United Tubes (Pvt) Limited is located in the Industrial Hub of the Metropolitan City. While establishing our Company, the ambition was to aspire and contribute the Industrial Units and Business Community, particularly to the Pharmaceutical Companies, by providing highly qualitative & standardized Tubes & Containers, As well as to decrease the alarmingly increasing level of un-employment, by Employing skilled manpower in the Company.United Tubes are among the top of most Companies in producing a wide array of Tubes in Pakistan who never compromise on the quality. While ensuring the quality, we are providing best services to our Customers as well.

We are also exporting Tubes to many countries, like U.S.A., Saudi Arabia, Middle East and Europe, apart from catering the requirements of national and multi-national Companies in Pakistan.

STAND NUMBER: H2/B3-5

VAIDIK ENGINEERING

PLOT NO: 69/A, Pushpray Complex, Vatwa, Ahmedabad - 382 445GUJARAT, INDIATelephone: +91-281-2384621 Mob : 9904242700E-mail: info@vaidikengineering.com Website: www.vaidikengineering.com

Contact Name: Mr Jayesh / Mr Viral- Proprietor

We are in this Business since 2009. Mr. Girish is Founder of Vaidik Industries; Mr. Jay is looking after the Company to make it Pioneer in Plastic Industries through “Vaidik” product. We had the benefit of supplying accuracy Plastic Processing Machineryand other machined parts to industrial corporations that are leaders in their field.

We have developed, expanded and incorporated high expertise to maintain our competitive edge. We endeavor to ensure that we deliver more parts like plastic moulds, plastic articles at competitive prices to meet customer needs. Our entire production process is completed in-house so that we can guarantee the quality client expect.

86

STAND NUMBER: H2/D-6

VINIT PERFORMANCE POLyMERS PVT. LTD.

224/225, Gokul Acrade “A”, Subhash Road, Vile Parle – (E),Mumbai – 400 057, Mumbai, INDIA Telephone: 022 – 28204120 / 28204247 / 28204248 Fax: 022 – 2204039 E-mail: mail@polymatindia.net Website: www.polymatindia.com

Contact Person: Mr. hiten bheda direCtor

Engineering Plastics and high performance polymers in the form of stock shapes ranging form dia 6mm to dia 200 mm are having varirty of applications in machine building, printing & packaging machinery along with automobile components

STAND NUMBER: H2

VRUNDA ENTERPRISE

7/11, GIDC, Vadodara, IndiaTelephone: 09227579291Email: vrundaenterprise@yahoo.co.in, harish9291@gmail.comWebsite: www.vrundaenterprise.com

ContaCt Person: Mr. ViMal MaKwana Position

Vrunda Enterprise is a leading manufacturer of carry bag punching machine. The operation of high precision, advancement and specialty makes our enterprise well known in India. We have become a leader and are working hard to set a respectable brand in this filed.

We constantly keep innovating, improving the level of this industry, making high level of punching machines tend towards the world. During the past few years, Vrunda has made great progress, and has become well known and outstanding in domestic market.

87

STAND NUMBER: 81

WIDESKy MACHINERy CO.LTD.

B01 international city,Dubai,UAETelephone: …0097144560685 Fax: ……009714458688E-mail: sasha@wideskycn.com Website: www.wideskycn.com

ContaCt Person: lili shi - ManaGer

Our factory is a professional production of plastic machinery and equipment manufacturers. was founded in 1988. In the development of more than 20 years. Widesky Machinery with enterprise management system and advanced Equipment .solid foundation and strong technology development strength, continue to absorb new technology. Make the product quality and performance of the plant is always leading position. Through more than 20 Years history and struggle. Our factory has formed two series of plastic machinery products. Extrusion machine series ,crusher series, including pipe production line, granulation line. granulation line, clean lines and series of plastic machinery and auxiliary equipment such as , crusher, grinder ,mixer, flaring machine, cooling tower and water cooling machine etc.

STAND NUMBER: H2/C4-2

WINNER SCREEN MACHINES PVT LTD

W-372 TTC INDUSTRIAL AREA, MIDC, NAVI-MUMBAI ,INDIATelephone: 022-27690104 E-mail: marketing@winnerscreen.com Website: www.winnerscreen.com

ContaCt Person: raVi KadaM - MarKetinG exeCutiVe

Winner Screen Machines Pvt Ltd, is into Printing Machine Manufacturing Business since last 2 decades and more. We manufacture Screen Printing Pad Printing and Dry Offset Printing machines along with its accessories Like plates, pads, screens, frames, fixtures, etc.

88

STAND NUMBER: H2/B3-7

WITTMAN BATTENFIELD INDIA PVT.LTD.

182 - Arumugam Nagar, Chinna Porur, Chennai - 600 116Chennai, IndiaTelephone: 044 - 42077009 Fax: 044 - 24761032Email: nanda.kumar@wittmann-group.comnanda.gopal@wittmann-group.comWebsite: www.wittmann-battenfeld.com

ContaCt Person: Mr. t. nanada KuMar- exeCutiVe direCtor

Wittmann Battenfeld Group leading in Machine & Auxillary manufacturing worldwide. Wittmann first group to give all products in one roof. Robots & Automation, MTC, Drier & conveying system, Conveyor, secondary Automation PET robot, WFR, Injection Molding Machine.

89

STAND NUMBER: H2/C3-6

yUDO HOT RUNNER INDIA PVT. LTD.

A-113/114, Evershine Industria Estate, Waliv Road,Chinchapada Junction, Waliv Road, Vasai - East, 401208 Thane, IndiaTelephone: 91-250-3200922 Fax:- 91-250-2451158E-mail: sales@yudo.co.in Website: www.yudo.com

ContaCt Person: Vishal aGarwal - President

Company Profile: Yudo is the biggest Hot Runner Company in the world with 84 subsidiaries and 18 manufacturing plants spread all across the world.

Yudo is also among the biggest players into Automation, Auxiliary Equipment’s and Robots. Yudo is among the leading players for PET turn key project supplier in Asia with upto 96 cavities in its credit.

A DEMAT GmbH trade fair www.euromold.com

EuroMoldProduct range

EuroMoldProduct range

Design

Materials

Simulation Visualisation

Engineering

Virtual Reality

CAD & CAM

Patternmaking &Prototyping

Moldmaking & ToolingTools

MachineTools

Quality Assurance &Automation

Processing &Finishing Rapid Prototyping

& Tooling

“From Idea to Prototype to Series Production”Exhibitor Invitation

“From the idea to series production”

A DEMAT GmbH trade fair www.euromold.com

November 25 – 28, 2014Frankfurt/Main, Exhibition Center

World Fair for Moldmaking and Tooling, Design and Application Development

93

Accurate International Trading Fzc ..........................................................................................95

Accutech Machine Tool (Fzc) ..................................................................................................95

Celada Middle East ...................................................................................................................96

Dmg Mori Seiki Middle East Fze ..............................................................................................96

Euro Gulf Machine Tools Tr. ...................................................................................................97

Hangzhou Shining 3D Tech Co., Ltd. ......................................................................................97

Imagegrafix Software Fzco .......................................................................................................98

Indish Technologies Fzc ...........................................................................................................98

Intergulf Ltd., Polyvenyl Components Branch .........................................................................99

Jacky’s Business Solutions Llc .................................................................................................100

Maptec Computer Systems ....................................................................................................101

Mersen Istanbul ......................................................................................................................101

Mundo Reader, S.L .................................................................................................................102

Osg Asia Pte Ltd .....................................................................................................................102

Swedish Me Steel ...................................................................................................................103

Tooling Holland / Know How Tooling Uae ...........................................................................103

Uddeholms Ab .......................................................................................................................104

Company Page#

INDEX

95

STAND NO.:1718

ACCURATE INTERNATIONAL TRADING FZC

P.O.BOX: 293701Dubai, UAETel.: +971 4 2533093/4 Fax: +971 4 2533095E-mail: info@accuratedubai.com Website: www.accuratedubai.com

ContaCt Person : Mr. VinaY KuMar

Accurate International is a Trading company based in Dubai providing high precision CNC Machines , Equipments , Tools and Accessories required for professional Die & Mould Manufacturing industries. We provide products of superior quality and value to serve the needs of business and organisations.

Major Products and Services:• CNC Machine Tools- CNC Machining centers , CNC Lathe, Hollow Spindle CNC Lathe• CNC Cylindrical Grinding Machines• Cutting Tools & Tool Holders• Machine Tool Accessories

STAND NO.:1132

ACCUTECH MACHINE TOOL (FZC)

#Q3-152, P.O Box:120952Saif-Zone, Sharjah, UAETel.:+97165578311 Fax: +97165578312Email: sales@amtuae.net website: www.amtuae.net

ContaCt Person : Mr. zuber

Located in Sharjah Airport International Free Zone, and founded in 2006, Accutech Machine Tool (FZC) is an authorized distributor and agent for metal cutting tools and CNC machine tools accessories. Since 2006, AMT has become a prime supplier of solid carbide and HSS cobalt endmills, drills, reamers, indexable turning and milling tools, threading inserts and tooling systems, Chatter-free deep hole boring bar and heads, CNC milling adapters and accessories. At present, AMT continues to widen its product ranges and expects to become more known – not only in the UAE market but also well known in other GCC countries.

96

STAND NO.:1710

CELADA MIDDLE EAST

R/A 12, Jebel Ali Free Zone North, Dubai, UAETel.:+9714 8833396 Fax: +9714 8833397Email: Silvio.Tomassoni@celada.it Website: www.celada.it

ContaCt Person: Mr. silVio toMassoni

ORIGIN. R.F. Celada was established in 1938 by Ricardo and Francesco Celada to Provide sales agency services for machine tools.

Celada has been working in the world of machine tools for 75 years now and its Catalogue features some of the world’s finest products. Celada has 200 employee and 70 of them work exclusively to provide technical assistance.

Celada intends to continue to invest in people and in quality and has multiple Objectives: to strengthen the service department by further improving its technical Know-ho and speed of response, to consolidate the company’s partnerships with Leading brands, and to continue to pursue international development by increasing its presence in European and Asian Countries.

STAND NO.:1700

DMG MORI SEIKI MIDDLE EAST FZE

JAFZA Towers Lob 18, Office 2403, Jebel Ali Free Zone, Dubai, UAETel.: +97148865740 Fax: +97148865741Email: sohrab.pourzand@dmgmori.com website: www.dmgmori.com

DMG MORI as a leading German/Japanese manufacturer are known for providing high end, quality CNC lathes, machining centers, state of the art 5-Axis machines, Turn & Mill and Mill & Turn as well as Ultrasonic & Laser Technology, both companies also work on extending the entry-sector offers. When it comes to economical turning & milling products, DMG MORI offers it ECOLINE series. We are also offering innovative machine technologies, expert services and application software that is tailor-made to the market demands.

DMG MORI SEIKI Middle East is responsible for the complete sales & after sales services of the entire product range of both manufacturer in UAE, Oman, Saudi Arabia, Bahrain, Kuwait, Jordan, Qatar & Lebanon. With detailed services, including application, technical management & operations support DMG MORI SEIKI Middle East provides total solutions for any customer need.

97

STAND NO.: 925

EURO GULF MACHINE TOOLS TR.

Liberty Bldg., Flat No. 403Al Soor, Rolla, Sharjah, UAETel.: +97165738739 Fax: +97165732354Email: sales@eurogulfuae.com website: www.eurogulfuae.com

ContaCt Person : Mr. sreeKanth

• Sales and service of Precision Manual/CNC Turning machines, CNC Heavy Duty Vertical machining centre, CNC Boring and Milling machines• Servicing and maintenance of CNC machines• Installations and commissioning of CNC Machine Tools • Calibration of CNC machines • Supply of Electronic and mechanical spare part for CNC machines• Upgrading of Old CNC machines with latest Fanuc/Siemens CNC controllers• Supply of Cutting Tools, Tool Holders, Drills and inserts of Turning, Threading and Milling applications

STAND NO.:1815

HANGZHOU SHINING 3D TECH CO., LTD.

18th Floor, Block A, Huarui CenterNo. 66, Jianshe Yi Road, XiaoshanHangzhou, ChinaTel.: +86 571-82999050 Fax: +86571-82999510 Email: sales@shining3d.com website: www.shining3d.com

ContaCt Person: Ms. MaY wanG

Hangzhou Shining 3D Tech Co., Ltd is a leading high-tech enterprise specialized in providing a whole 3D digitizing and 3d printing solution. Shining 3D now owns various proprietary intellectual property rights, including Rapid 3D imaging, Large-scale 3D measuring, 3D dynamic display, High precision modeling & reconstruction and so on. The White light 3D digitizing technology has advantages of high efficiency and high accuracy, now is widely used in fields of 3D measurement, reverse engineering, 3D inspection, customization, rapid prototyping, 3D printing, 3D display, 3D digital entertainment, etc.

98

STAND NO.:1903

IMAGEGRAFIX SOFTWARE FZCO

JAFZA View 18, 206 Dubai, UAETel.: +9714 8800857 Fax: +9714 8800858Email: shaju@igfzco.com Website: www.image-grafix.com

Company Profile: Established in 1996 in Dubai, UAE, ImageGrafix Software FZCO is one of the leading value-added-distributors, technical support centre and service providers of engineering software packages and solutions addressing integrated Plant Design and Plant Engineering applications as well as CAD/CAM/CAE solutions.

STAND NO.: 1804A

INDISH TECHNOLOGIES FZC

4038, Regus MSQ Tower, Near Sharjah megamallSharjah, UAETel.:+ 97165985345 Fax: +97165985101Email: pramodh.radhakrishnan@indishtech.comWebsite: www.indishtech.com

ContaCt Person: Mr. PraModh radhaKrishnan

Indish Technologies is committed to providing customers value-added services by offering solutions from Siemens PLM suite of products in the UAE viz., Dubai, Sharjah, Abu Dhabi, RAK, Ajman and other GCC countries. We work to develop a long-term business relationship with our customer, which is founded on our ability to help identify and recommend the best suited solution for each customer’s business environment. We strive for continuous improvement in our relationships with customers and in our ability to provide quality parts, products, and technical service through a ‘Right-on-Time’ delivery system.

Indish Technologies is authorized by Siemens to sell support and train on NX -CAD/CAM/CAE solutions, Technomatix, Teamcenter, Velocity Series including Solid Edge and FEMAP with NASTRAN.

Indish Technologies has vast experience in the field of CAD/CAM/CAE engineering services and can therefore provide specialized technical training services on Siemens PLM products such as Solid Edge, NX, Femap, Nastran and Tecnomatix software. Indish also provides implementation services and resources on customers’ sites.

99

STAND NO.:1818

INTERGULF LTD., POLyVENyL COMPONENTS BRANCH

Khalid sea port Post Box 6131Sharjah, UAETel.: +97165029250 Fax: +97165285720Email: tvsekar@iffco.com Website: www.empol.com, www.iffco.com

ContaCt Person: t V seKaran

IntergulfEmpol, a member of theIFFCO Group manufactures world class PET preforms & closures at its state of the art facilities in the UAE.

IntergulfEmpol division is one stop low cost solution for PET beverage packaging, including invention, design, mock up sample, prototype mould, sample bottles, Production moulds, preforms, caps & master batches.

Gained recognition repeatedly from customers over the region.

Infrastrcture: Design & Development facilities, Prototype facilities, Manufacture facilities and wide range of preforms, caps facilities at one place.

100

STAND NO.: 1110

JACKy’S BUSINESS SOLUTIONS LLC

Garhoud, Near Terminal 1Dubai, UAETel.: +97142821822 Ext: 286 Fax: +97142821474Email: dpd@jackys.com; p.visu@jacys.com website: www.jackys.com

ContaCt Person : P Viswanathan

Jacky’s Business Solutions LLC works as an end-to-end solutions provider for major corporations seeking efficient and effective visitor management, banking and graphics solutions.

Jacky’s partners with major global brands to provide these companies in the Middle East the required queuing management solutions, banking products, large format printers, industrial digital press, 3D Scanners from Artec, 3D Printers from Stratasys, Concept Laser & Makerbot. Among the world leading brands Jacky’s Business Solutions work with are HP for large format printers, and industrial digital presses, Stratasys for 3D Printers, Manger for banking products and QMS for visitor management solutions.

Backed by strong Service and Support team of Engineers based in the UAE and Bangladesh, Jacky’s is able to support customers throughout the Middle East and Bangladesh with ‘Total Digital Printing Solutions’ comprising of printer hardware, colour management support, Onyx or Caldera RIP software solution and original supplies. With a focus on large format printing applications on both flexible and rigid substrates, Jacky’s has got the in-house expertise to support their install-base on various ink technologies such as solvent, low solvent, UV, Latex, dye and pigment based inks.

101

STAND NO. 1813

MAPTEC COMPUTER SySTEMS

Wasl Business Centre, Suit 701 Port Saeed, DeiraDubai, UAETel.: +97142517734 Fax: +97142517736Email: info@maptec.ae website: www.maptec.ae

ContaCt Person : Mr. jafar odeh

Maptec Computer Systems is here again with its only high quality class color 3D Printer for true color printing speed and affordability. Among of its many features is that it produces color and high quality output that communicates design intend and 5x-10x faster than all other technologies that builds multiple models at the same time. A user machine with its intuitive user control panel and eco-friendly with its use of non-hazardous build materials. On top of it all, it has the lowest operating cost. For more information, visit our stand 1813, Maptec Computer Systems and to know more about 3D printing experience.

STAND NO.: 1913

MERSEN ISTANBUL

Gosb Ihsan Dede Cad.900Gebze, TurkeyTel.: + 90 262 751 02 62 – Ext 351 Fax: + 90 262 751 02 68Email: leyla.senol@mersen.com website: www.mersen.com

ContaCt Person : Ms. leYla senol

Global expert in electrical specialties and graphite-based materials, Mersen designs innovative solutions for its clients’ specific needs and enable them to optimize their manufacturing process in sectors such as energy, transportation, electronics, chemical, pharmaceutical and process industries.

Mersen holds leadership positions in two major areas of expertise: materials and electrical. We offer a range of equipment based on graphite and high-performance materials, including reactive materials and silicon carbide - for extreme industrial environments that require resistance to high temperatures and corrosion. Our electrical solutions and services for motors and generators contribute to the safety and performance of electrical installations and power electronics.

102

STAND NO.:1711

MUNDO READER, S.L

Calle Sofia, 10 Las RozasMadrid, SpainTel.: +003491 787 58 67 Fax: +0034917875869Email: elena.fernandez@bq.com website: www.bq.com

ContaCt Person: Ms. elena fernandez

The Witbox is manufactured in our Spanish factory in accordance with the strictest Quality-control standards. The Witbox boast a cubic DIN-A4 print area: the largest In a domestic printer in the world. This allows it to print large-scale items, or multiple Parts all at once.

You can run Witbox printer with a variety of open source software (Slic3r, Cura, Repetier..)

Functional, but without sacrificing aesthetic appeal. That’s the philosophy behind The design of the Witbox, whose fully enclosed format offers the following benefits: Blocks accidental access during printing, Minimises noise intrusion, prevents Heat from escaping.

STAND NO.:1602

OSG ASIA PTE LTD

No60, Kaki Bukit Place, #08-19, Eunos TechparkSingapore -415979Tel: +65 6844 4350 H/P:+65 8218 5821 Fax:+65 6844 4351Email: raman@osgasia.com.sg Web: www.osgasia.biz

ContaCt Person: Mr. raMan PandiYan

OSG has strived to become World No.1 Company with our technology and united marketing Strategy over 75 years since 1938.

OSG is a comprehensive cutting tool manufacturer specialized in the manufacture and sales of taps, end mills, drills, inserted toolings and rolling dies.

Starting in the year of 1962, we enthusiastically have broadened the global business and declared “Global Company”. Now, we do business in 40 places around the world.As OSG theme called “Tool Communication” this will bridge country to country, industry to industry through our tool. We will move forward to establish Global Company by providing the best tool to you.

103

STAND NO.:1100

SWEDISH ME STEEL

P.O Box 51270, Warehouse 1J-11/3Sharjah, UAETel.: +97165261875 Fax: +97165261876Email: info@smsteel.net website:www.smsteel.net

ContaCt Person: Mr. CheYenne KaMran

Swedish ME Steel (SMS) is a leading provider of specialized steel in the Middle East. With over twenty years of experience in the industry, SMS offers solutions developed in close cooperation with its customers to achieve more efficient production, better cost analysis, and longer service life.

For the plastic industry we present Toolox® - a ready to use tool steel that combines high wear resistance, excellent toughness, high surface quality.Toolox has high dimensional stability ensuring precision in demanding machining, and a homogenous structure ensuring excellent polishing and photo etching.Mould makers and end customers around the world are increasingly selecting Toolox as the new standard over the traditional grades of P20, H13 and 420.

STAND NO.: 1712

TOOLING HOLLAND / KNOW HOW TOOLING UAE

Al Shaari St, Dubai, UAETel.: +31 653291218Email: hvmtravel@yahoo.com website: www.toolingholland.nl

ContaCt Person: Mr. henri Van Manen

Tooling Holland / Know How Tooling U.A.E started as a mould making company for Pipe Fitting Moulds in 1980 and has ever since developed a great expertise in the production of High Tech mould technology.

We offer various types of tools, specialising in multi cavity moulds for Pipe Fittings, Crates, and High Speed moulds for Thinwalled Containers .Over 30 years of experience and our highly skilled technical employees have led to acquiring a leading position in mould manufacturing.

104

STAND NO.:1902

UDDEHOLMS AB

SE-68385, Hgfors, SwedenTel.: +46701900380 Fax: +4656317461Email: ulrika.mellring@uddeholm.se website: www.uddeholm.com

ContaCt Person: Ms. ulriKa MellrinG

Uddeholm is the world’s leading supplier of tooling materials and related services. We offer a large range of tool steel for several different application fields; cold work, hot work, plastic moulding and component business. Long tradition combined with research and product development equips Uddeholm to solve any tooling problem that may arise.

With over 100,000 customers in more than 100 countries, Uddeholm is present on every continent and has been for nearly 350 years. Together with ASSAB, our exclusive sales channel, we are able to guarantee you the same high quality of Swedish Steel wherever you have your business.

105

STALL NO.:- H2/A3-3

SHREE MOMAI ROTO CAST CONTAINEERS PVT LTD.

C-1/821, GIDC Vaghodia INA, Vadodara - 391 760, Vadodara , INDIA Telephone: 02668-263440, 263358 Fax: 02668-263358E-mail: iyer@shreemomai.com Website: www.shreemomai.com

ContaCt Person: Mr.raMChandran iYer - direCtor

Company Profile: Shree Momai is a steadily fast growing organization, manufacturing Rotomoulding plant, machinery including 3-4 Arm Bi-Axial Machine turret/independent, Shuttle machine, closed oven type machine, Rock N Roll open type machine, Pulveriser for different capacity, Extruder. Our products are innovative and have global acceptance. We are fully backed up by foreign consultant and technology tie ups with world leaders in the field of Rotomoulding our original design, advanced techno-logy and reasonable price, our products have been exported to regions like Asia, South America, Middle – East country like Oman, Bahrain, Kenya, U.A.E., Saudi Arabia, Australia & East Africa, Vitenam, Ghana, and Bangladesh etc. Welcome more customers from around the world to co-operate with us! What we offer is worth your while.

ADDENDUM

106

JAISHREE POLyPLAST PVT. LTD.

No.3, Raj Narayan Marg, Civil Lines, New Delhi 110054,New Delhi, INDIA Telephone: 011-27206864 / 27206865 / 9810962139 / 9212721139E-mail: jaishreepoly@gmail.com Website: www.jaishreepolyplast.org

ContaCt Person: Mr. uMa Charan aGarwal - (CMd)

Company Profile: We are one of the distinguished names engaged in manufacturing and exporting of a quality proven range of High Density Polyethylene and Polypropylene (HDPE & PP) Products. Widely used for packaging of Fertilizers, Cement, Tarpaulins, Polymers, Chemicals, Coverings, Sugar and Salt, our range is manufactured using high quality material. Our range encompasses:• Woven Sacks• Tarpauline• Fabrics• Industrial Bags• FIBCs• Sand BagsThese are widely appreciated for the features like:• Optimal quality• User friendliness• Low maintenance• Light varied• Attractive colors• Strong carrying capacity

ADDENDUM