Exclusive All Euro Special KABO Torque Wrenches

Exclusive All Euro Special KABO Torque Wrenches

DEC ‘18

Professional quality (ISO 6789), with calibration certificate (±3% accuracy).

•20–110Nm (15–81 Ft Lbs)

$136+GSTARD080BB

Kabo Torque Wrench | 3/8” Sq Drv 15–81 Ft Lbs


•30–210Nm (22–155 Ft Lbs)

$149+GSTARD150BB

Kabo Torque Wrench | 1/2” Sq Drv 22-155 Ft Lbs


•50–350Nm (37–258 Ft Lbs)

$178+GSTARD250BB

Kabo Torque Wrench | 1/2” Sq Drv 37 - 258 Ft Lbs

Ajax Ratcheting Breaker Bar 18” | 3/8” Sq Drv

$68+GSTET1205

Ajax Ratcheting Breaker Bar 18” | 3/8” Sq Drv

Imperial | 1/4” Sq Drv•IMPERIAL 20 - 100 In Lbs

$194+GSTARD020

Ratcheting Torque Wrench Imperial | 1/4” Sq Drv

Metric | 1/4” Sq Drv•METRIC 2.25 - 11.3Nm

$194+GSTARD020-NM

Ratcheting Torque Wrench Metric | 1/4” Sq Drv

Free Flexible

Breaker Bar

1/2” Sq Drv | 24”

Free Flexible

Breaker Bar

1/2” Sq Drv | 24”

Free Flexible

Breaker Bar

1/2” Sq Drv | 24”

www.alleuroparts.co.nz 0800 255 387 [email protected] *Prices Valid until 15th January 2019

SOLD OUTAvailable on Preorder

Application: Ford Focus, Focus II.5RS/ Focus 2.5RS 50, Mondeo Mk IV

For GEN2 wheel bearings. Adequate and appropriate lubricants to be used on threaded force screws and

thrust bearing (Laser Tools Recommends Molybdenum Disulphide Grease (black drive shaft grease)

Ford Mondeo MKIV from 2007, Galaxy from 2006, S-Max from 2006 Front.

Land Rover Freelander 2 from 2006 Front.Volvo S80, V70, XC60, XC70 from 2006

Specially designed tools for manipulating hose seals. Each tool has a different kook design which

are ideal for working in hard to reach areas.

Soft rubber handles200mm overall lengthHeat treated steel tips

2 piece set

*A universal tool for pressing caliper pistons back into caliper housings.

*This tool incorporates a high-precision hardened cylinder and piston, together with a built-in axial

bearing

*The precision of this tool makes it easy to press the pistons into the caliper.

A high quality 3/4” Sq Drv impact wrench designed for the professional user. Backed by a 24 month

warranty for peace of mind.Composite motor housing

Twin hammerThumb operated forward / reverse providing one

handed operationVariable speed trigger

Breakaway torque: 1,500 Ft Lbs

DEC‘18


Universal Caliper Windback ToolHCBA1059

$239+GSTHCBA1059

Hose remover Set 2 pceET1501

$29+GSTET1501

Impact Gun 3/4 Inch Black SnakeRMAXIMP34

GEN2 Wheel Bearing Kit 82mm Ford/Landrover/VolvoET4264

$495+GSTET4264

$569+GSTRMAXIMP34

DEC‘18

* For the straightforward removal and fitting of new flexible V-ribbed belts (e.g. air-conditioning

compressor).* Also suitable for use with double-belt drives.

- BMW 118, 120, 318, 320, 325, 330, 335, 520, 525, 530, 535, 635, 720, X3, X5 - Audi A3 1.6/ 2.0D

- Volkswagen Eos, Golf, Passat, Polo, Scirocco 2.0Dplus Citroen, Volvo Peugeot and more

* Using this tool will prevent damage to the ball joint. It is easy to operate and can save time and money

as well as your time and labor.

A forged tool - Material: SCM 440. We include two different adaptors so that you can choose the

appropriate adaptor for your repair.

For optimal cleaning of wheel hubs / brake discs on passenger cars / vans.

If the wheel hub isn’t clean enough new brake discs will have uneven contact - this tool creates a

perfect mounting surface for new brake discs Inner dia: 90mm. Max speed: 1,500 RPM

DEC ‘18

This tool is used to remove the ball joint of tie rod and drag link.

Used with low-speed impact wrench. You can use this tool with low speed air impact.

With this tool, you can do the whole repair on the car. This tool helps prevent damage to the ball joint and related parts.

Manual Tool

With HydraulicSpindle

Please Note: This Tool is exclusively available as a preorder - estimated delivery 6 weeks.


$641+GSTHCBC1410

Exclusive All Euro Preorder HCBA1410/HCBC1410Universal Truck Ball Joint Remover (39mm) Manual and Hydraulic Options

$389+GSTHCBA1410

Wheel Hub Cleaning Tool & DiscsET4070 + ET4070D

$65+GSTET4070

$26.75+GSTET4070D - 5 pack

Stretch Rib Belt Tool KitHCBA1781

$325+GSTHCBA1781

The Auxiliary Belt Tensioner Set has been developed to provide a safe and controlled method of adjusting the belt tensioner position during removal and installation of the auxiliary belt.

Belt tension is provided by a heavy spring built in to the tensioner unit, the tensioner features a raised peg as a location to apply leverage when removing or installing the auxiliary belt. Without the use of special tooling,

belt removal or installation requires two people.

Access to the tensioner can be severely limited by engine and vehicle body components. AST5188 has been designed to provide easy access to the tensioner peg in all instances. The set includes a number of adaptors and an extension bar featuring two bi-hexagonal drives, providing a number of options when assembling the

tool to access the tensioner.

AST5188 can be used with AST4765 Auxiliary Belt Tensioner Tool Set for even greater application coverage.

Also used on 2.0 / 2.2 DW10 and DW12 engines.

DEC ‘18

Applications:Citroën 1.4 / 1.6 HDi 8v. / 16v. C1 / C2 - C3 III, C3 Pluriel, C4 Picasso

Ford 1.4, 1.5, 1.6 TDCi / ECOnetic 8v. / 16v. - B-MAX, C-Max, EcoSport, Fiesta, FocusFocus C-Max - Fusion, Galaxy, Grand C-Max, Mondeo, S-MAX, Tourneo Connect

Tourneo Courier, Transit Connect, Transit CourierMazda 1.4 / 1.6 TDCi 8v. / 16v.- 2 (DE/DH), 3 (BK/BL),

Mini, 1.6 16v. - Mini Clubman, Mini Cooper, Mini One, R55/R56Peugeot 1.4 / 1.6 HDi 8v. / 16v. - 1007, 107, 206, 206 CC, 206 SW, 307, 307 SW, 508

Toyota 1.4 DiD 8v. - AygoVolvo 1.6 D4 16v. - C30, S40, S80, V50, V70

Please Note: This Tool is exclusively available as a preorder - estimated delivery 3 weeks.


$137.50+GSTAST5188

Exclusive All Euro Preorder AST5188Auxiliary Belt Tensioner Tool Set - 1.4 / 1.5 / 1.6 / 2.0 Diesel Engines FORD - PSA

Exclusive All Euro Special KABO Torque Wrenches

Documents

Transcript of Exclusive All Euro Special KABO Torque Wrenches