Head Office - South Australia Hydraulic Torque Wrenches Tools A4.pdf · Hydraulic Torque Wrenches...
2
Hydraulic Torque Wrenches For further information or for price and availability enquiries please contact your nearest office: Global service Norbar is the only torque equipment manufacturer to be able to offer tool and instrument recalibration services to the original factory standard on four continents. The accredited laboratories in Australia, USA and Singapore use the same equipment and procedures as the factory’s UKAS accredited laboratory in the UK. Western Australia Unit 3/95 Bannister Road Canning Vale WA 6155 Tel: +61 (0)8 9455 7717 Fax: +61 (0)8 9455 7979 Email: [email protected] Head Office - South Australia 45 - 47 Raglan Avenue Edwardstown SA 5039 Tel: +61 (0)8 8292 9777 Fax: +61 (0)8 8292 9799 Email: [email protected] New Zealand 65a O’Rorke Road Penrose Auckland NZ Tel: +64 (0)9 579 8653 Fax: +64 (0)9 579 8654 Email: [email protected] Queensland Unit 5/55 Donaldson Road Rocklea QLD 4106 Tel: +61 (0)7 3216 7600 Fax: +61 (0)7 3216 6392 Email: [email protected] Victoria Unit 6/810 Princes Highway Springvale VIC 3171 Tel: +61 (0)3 9562 3382 Fax: +61 (0)3 9562 3072 Email: [email protected] South East Asia - Singapore 60 Kaki Bukit Place #09-16 Eunos Tech-Pack Singapore 415979 Tel: +65 6841 1371 Fax: +65 6841 1372 Email: [email protected] New South Wales Unit 33/72 - 80 Percival Road Smithfield NSW 2164 Tel: +61 (0)2 9725 2831 Fax: +61 (0)2 9604 0951 Email: [email protected] Specifically designed for extremely low height access applications, our Hydraulic Torque Wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out needs. Our standard Square Drive Series features eight different tools with capacities ranging from 194 to 81,360 N.m of torque using a 10,000 p.s.i hydraulic pump. Our standard Hydraulic Cylinder/Link Series features seven different wrenches with capacities ranging from 159 to 67,800 N.m of torque using a 10,000 p.s.i. hydraulic pump. With our range of power consoles and accessories, Norbar can tailor a solution to your specific bolt tensioning application, no matter how unique! Norbar Hydraulic Torque Tools
Transcript of Head Office - South Australia Hydraulic Torque Wrenches Tools A4.pdf · Hydraulic Torque Wrenches...
Hydraulic Torque Wrenches
For further information or for price and availability enquiries please contact your nearest office:
Global service
Norbar is the only torque equipment manufacturer to be able to offer tool and instrument recalibration services to the original factory standard on four continents. The accredited laboratories in Australia, USA and Singapore use the same equipment and procedures as the factory’s UKAS accredited laboratory in the UK.
Western AustraliaUnit 3/95 Bannister RoadCanning Vale WA 6155Tel: +61 (0)8 9455 7717Fax: +61 (0)8 9455 7979Email: [email protected]
Head Office - South Australia45 - 47 Raglan AvenueEdwardstown SA 5039Tel: +61 (0)8 8292 9777Fax: +61 (0)8 8292 9799Email: [email protected]
New Zealand65a O’Rorke RoadPenrose Auckland NZTel: +64 (0)9 579 8653Fax: +64 (0)9 579 8654Email: [email protected]
QueenslandUnit 5/55 Donaldson RoadRocklea QLD 4106Tel: +61 (0)7 3216 7600Fax: +61 (0)7 3216 6392Email: [email protected]
VictoriaUnit 6/810 Princes HighwaySpringvale VIC 3171Tel: +61 (0)3 9562 3382Fax: +61 (0)3 9562 3072Email: [email protected]
South East Asia - Singapore60 Kaki Bukit Place#09-16 Eunos Tech-PackSingapore 415979Tel: +65 6841 1371Fax: +65 6841 1372Email: [email protected]
New South WalesUnit 33/72 - 80 Percival RoadSmithfield NSW 2164Tel: +61 (0)2 9725 2831Fax: +61 (0)2 9604 0951Email: [email protected]
Specifically designed for extremely low height access applications, our Hydraulic Torque Wrenches offer a cost efficient option to handle a wide range of bolt tightening and break-out needs.
Our standard Square Drive Series features eight different tools with capacities ranging from 194 to 81,360 N.m of torque using a 10,000 p.s.i hydraulic pump.
Our standard Hydraulic Cylinder/Link Series features seven different wrenches with capacities ranging from 159 to 67,800 N.m of torque using a 10,000 p.s.i. hydraulic pump.
With our range of power consoles and accessories, Norbar can tailor a solution to your specific bolt tensioning application, no matter how unique!
Norbar Hydraulic Torque Tools
AIR POWERED CONSOLES
Air Powered Console Model Number
Oil Delivery per Minute
Oil Reservoir (Litre)
Usable Oil (inches3)
Overall Width (cm)
Overall Length (cm)
Overall Height (cm)
Pump Weight w/ Oil (kg)
RWP55465 in³ @100psi
9.46 590 42 24.1 50.3 29.555 in³ @ 10,000psi
• Use where air is the preferred source of power • Powerful 3hp motor starts under load • External adjustable pressure regulator • Retract side internal relief valve protects tool • Use for double or single acting tools
Air Motor, Air Control
• 3hp, 50 cfm @ 80 psi • Pneumatic remote control with 30-foot
cord
ELECTRIC POWERED CONSOLES
Air Powered Console Model Number
Oil Delivery per Minute
Oil Reservoir (Litre)
Usable Oil (inches3)
Overall Width (cm)
Overall Length (cm)
Overall Height (cm)
Pump Weight w/ Oil (kg)
TWP55-50-220704 in³ @100psi
9.46 525 43.5 24.1 46 34.156 in³ @ 10,000psi
These pumps have been continually upgraded over the last 40 years and some of the originals are still in service! Equipped with a 1-1/8 horse power, single phase, universal motor; they have a noise level of 90-95 dBA. These power consoles offer the best weight to performance ratio of any of our electric/hydraulic pumps. CSA rated for intermittent duty.
• Two-speed high performance pump • External adjustable pressure regulator • Retract side internal relief valve protects tool • Hand remote • Use for double or single acting tools • Remote control with 30-foot cord
Electric Motor
• 1-1/8 hp, 12000 rpm Remote control with 30-foot cord
• 115V, 25 amps • 110V/50Hz, 25 amps
Electric Control
• 220V/50Hz, 13 amps
ELECTRIC POWERED CONSOLE (TL-TP230)
Model Number Motor Voltage Electricity PowerMaximum Nameplate
Current
Maximum Advance Pressure
Pressure @15 Amp Motor Current (with 80° F - 100° F Oil Temp)
Retract Pressure
TLTP (230) 230 V50 Hz 1.5 KW
10.5 A700 bar n/a 120 bar
1 Phase 2Hp 10,150 psi n/a 1.740 psi
Hydraulic power unit engineered to continuously and reliably operate a variety of hydraulically powered torque wrenches operating up to 700 bar / 10,150 psi.
Thiscompactdesignutilisesafinnedhousingwithintegralfanthateliminates the need for an external cooler. Directly mounted pressure
and directional control valves eliminate additional plumbing and potential leak points while keeping the unit compact.
This unit includes pendant control for manual advance and automatic retract operation.
Model Number "Advance Flow Rate (0-100 bar / 0-1500 psi )"
"Advance Flow Rate (100-700 bar /1,500-10,1500 psi )"
Reservoir Capacity Usable Oil Noise Level
@ 300 bar Unit Weight w/Oil Control Pendant Length
TLTP (230) 340 in3/min 67 in3/min 3.7 liter 1.7 liter 68–70 dB 34 kg 6 meter
Norbar Square Drive (NSD) Series
NSD Series
Square Drive
(inches)
Min/Max,N.m
@10,000 p.s.i (+\- 3%)
Min/Max,lbf.ft
@10,000 p.s.i (+\- 3%)
Weight*(kg)
Reaction Area -
RA(mm)
Length L1(mm)
Length L2(mm)
Length L3(mm)
Radius R(mm)
Height H1
(mm)
Height H2
(mm)
Width W1
(mm)
Width W2
(mm)
Width W3
(mm)
NSD-1900 3/4 194-1,874 143-1,382 2.38 94 40 133 151 30 104 145 50 69 56NSD-4500 1 355-3,960 262-2,921 5.10 136 47 183 202 32 124 166 70 91 81NSD-8000 1-1/2 765-6,928 564-5,110 7.80 139 55 193 214 44 151 199 76 114 89NSD-15000 1-1/2 1,407-14,633 1,038-10,793 13.56 165 57 222 239 52 187 232 99 136 127NSD-27000 2-1/2 2,377-24,315 1,753-17,934 28.12 191 88 264 295 76 233 274 126 189 141NSD-40000 2-1/2 3,577-34,986 2,638-25,804 34.01 191 88 276 298 79 248 289 149 213 141NSD-60000† 2-1/2 ** ** 65.77 189 186 318 338 83 285 320 146 210 140NSD-80000† 2-1/2 ** ** 133.80 223 150 373 406 95 356 396 184 248 146
*Weight includes tool, reaction member and square drive. †Steel Casting **Please inquire for additional information.
Norbarsquaredrivehydraulicratchetwrenchesofferacostefficientoption to handle a wide range of bolt tightening and break-out needs. The NSD Series ratchet wrench employs a “patented design” which increases accuracy and reduces the number of moving parts. Our robust and lightweight aluminum body completely encloses the drive train assembly keeping the crucial lubricant inside the tool whilesignificantlyreducingtheopportunityforoutsideelementstocontaminate the inside of the tool.
Square Drive - Tool Specifications
Norbar Hydraulic Cylinder/Link (NHC/L) Series
NHL-1800 Heads(mm)
ATF Radius P/R19 27 1027 30 932 33 937 36 936 38 946 41 951 44 9
NHL-4500 Heads(mm)
ATF Radius P/R32 35 937 37 941 40 946 43 1048 45 1251 45 1056 48 1060 50 1065 54 1270 57 1275 60 12
NHL-9500 Heads(mm)
ATF Radius P/R51 46 1256 48 1260 51 1265 55 1270 61 1475 65 1376 67 1686 72 1695 77 16
NHL-14000 Heads(mm)
ATF Radius P/R60 51 1165 55 1270 61 1475 65 1376 67 1686 72 2495 78 24105 83 24
NHL-23000 Heads(mm)
ATF Radius P/R70 64 2375 67 2376 69 2586 74 2595 81 26105 85 26115 91 26125 99 26135 104 26
NHL-35000 Heads(mm)
ATF Radius P/R86 74 2495 81 26105 85 25115 91 25125 98 25135 104 26145 110 28
NHL-65000 Heads(mm)
ATF Radius P/R115 100 33125 105 33135 110 33145 116 32155 121 32165 127 32175 133 32185 138 32
NHCSeries
Min-Max, N.m @10,000 p.s.i (+\- 3%)
Min-Max, lbf.ft@10,000 p.s.i (+\- 3%) Length (mm)
Height(mm)
Body Width(mm)
Head Width(mm)
Range(mm)
Weight with Head (kg)
NHC-1800 159-1,754 117-1,294 159 102 28 24 19 - 51 3.29NHC-4500 399-4,168 294-3,074 178 146 37 27* or 30† 32 - 75 4.20NHC-9500 904-9,354 667-6,899 235 159 38 38 51 - 98 6.35NHC-14000 1,342-13,423 990-9,900 248 203 50 50 60 - 108 11.11NHC-23000 2,051-21,627 1,513-15,951 286 235 50 62 70 - 137 19.05NHC-35000 3,064-32,024 2,260-23,620 286 235 74 75 89 - 146 25.85NHC-65000 4,711-60,720 3,475-44,785 ** ** ** ** ** **
*32 to 51 Heads †56 to 75 Heads §Steel Cylinders Only **Please inquire for additional information.
Norbar Inline hydraulic ratchet wrenches require minimum clearance while applying torque on the same plane as the nut, providing a marked improvement over square drive socket wrenches. Our patented design breakthrough reduces the overall dimensionsoftheinlineratchetingheadallowingittofitalmostevery application.
Norbar Hydraulic Cylinder/Link Tool Specifications
SpecificallydesignedfortheNorbarhydraulicpumps,theseaccessoriescanassistincreatingasolutiontailoredtoyourspecificneeds:
Norbar Hydraulic Pump Accessories
Frame• For protection from
surroundings• For users that will not be
keeping their power console in a protected area during use.
Wheels• For ease of movement.Castor
• For easy directional steering.
Norbar Hydraulic Cylinder/Link Tool Accessories
Accessories available upon request:
• Inline Reaction Arm
• Hex Reducer
• Stack Socket
Accessories available uponrequest:
• Straight Reaction Arm with Clip
• Extended Reaction Member
• Hex Drive Impact Socket
• Hex Driver Socket
• Direct Socket Drive
• Direct Hex Drive Adaptor
Norbar Square Drive Hydraulic Tool Accessories
Hoses• Norbar supplies a variety
of different hoses to suit different applications. These hoses also come in a range of lengths.
4 Port Manifold• For users that require
multiple hydraulic tools to be run from the one power console.
www.norbar.com
Hex Link Specifications
