Everything for the Metal Builder & Roofer C 2020 …...4” quick release hex drive, 2.8 lbs. tool...

PRICES GUARANTEED UNTIL MARCH 31, 2021 OR WHILE SUPPLIES LAST - SUBJECT TO CHANGE WITHOUT NOTICE

(800) 821-5448 Order online @ www.dynamicfastener.com © Copyright 2020 D.F.S.

MAIN OFFICE

KANSAS CITY9911 E. 53rd St.

Raytown, MO 64133

816-358-9898 Local

800-844-1199 Fax

800-821-5448 Ntl

CHICAGO 2575 W. LeMoyne St.Melrose Park, IL 60160

708-615-1450 Local

708-615-1451 Fax

800-573-7787 Ntl

HOUSTON 1414 Brittmoore Rd.Houston, TX 77043

713-647-8665 Local

713-647-8635 Fax

800-988-5490 Ntl

LAS VEGAS 6455 Dean Martin Dr. “J”Las Vegas, NV 89118

702-566-1555 Local

702-566-0175 Fax

866-936-8665 Ntl

MEMPHIS 3700 Cherry Rd.

Memphis, TN 38118

901-369-8000 Local

901-369-0105 Fax

800-727-0288 Ntl

ST. LOUIS 12800 Pennridge Dr.Bridgeton, MO 63044

314-739-8771 Local

314-739-8691 Fax

800-444-0515 Ntl

ST. PAUL 2316 Territorial Rd.St. Paul, MN 55114

651-644-1212 Local

651-644-1124 Fax

800-755-2426 Ntl

Everything for the Metal Builder & Roofer®

2020 TOOL & FASTENER HAND GUIDEWE ARE THE USSA!!!! Together, we can & will accomplish anything!

DYNAMICFASTENER2020

#DW267, DW268 or DW2696+ $168.65 PG. 4

D•F® DYNA-CLAMPS®

DC-U600+ $4.95/ea PG. 68

LEAKY METAL ROOF?D•F® DROP-STOP® PG. 56, 57

#310+ $5.50 PG. 61-63

D•F® DYNA-FL SH®

D•F® ULTRA-PREMIUM IMPACT-TESTED™

NUT RUNNERSWith Mag 10 $2.505/16 x 2-9/16” 100 $1.75 PG. 712550-22 Call PG. 31

12V RIVETTOOL KIT

FREE 3RD BATTERY

D•F® SELF-DRILLERS PG. 74-83

With Dyna-Coat ®

DYNA-GUARD®D•F® SNOW RETENTION FOR METAL ROOFS

PG. 66-69

PG 66

Pay as low as 99¢D•F® DYNA-CLIPS®

EXCITINGNEW ITEM

D•F®

RIVET BOSS® PG. 92, 93TM

CALL 800-821-5448 OR FAX 800-844-1199

ANCHORSAdhesive, Structural ............................53, 99All-Thread Rod ..........................................99Beam Clamps ............................................99Cable Bracing ............................................90Chem-Fast .................................................99Concrete Anchors ......................................97Conventional Foundation Bolts..................96Epoxy.........................................................99Hangermate .............................................100Hillside Washer..........................................96Nylon Nailin ..........................................CALLPowder Actuated .....................................100Power-Bolt .................................................97Pull-Out Tester ..........................................90Sag Strap...................................................90Screw-Bolt .................................................97Shims .........................................................45Sleeve Anchor (Lok/Bolt) ...........................98Steel Banding and Tools .........................113Structural Adhesive .............................53, 99Stud Anchor ...............................................96Tapcon.......................................................97Tie-Wire ...................................................123Trak-It ......................................................100Twin-Cartridge Epoxy ................................99Wedge Anchor ...........................................96Zamac Hammer-Screw ..............................98Zamac Nailin..............................................98

FASTENERSAdhesive, Structural ..................................53Bi-Metal Screws .........................................87Bolts & Nuts ...............................................94Box Bolts ...................................................94Caddy Clips ..........................................CALLClip Screws ................................................79Collated Screws.........................................89Decimal Equiv. Chart ...............................102Decking Screw...........................................86D.F Screws ................................................85Dril-Flex Structural Fasteners ....................89Drywall Screws ..........................................85Dyna-Coat Premium Screw Coating..........72Dyna-Grip Framing Screw .........................74Explosion Venting Screws .........................90Fabloks ......................................................94Fenderhead Stout T-5 ...............................88Hangermate .............................................100Header Selfdrillers .....................................80Hextra Screws ...........................................84Hillside Washer..........................................96HVAC Screws ............................................89Insulation Hanging Pins .............................55Insulation Screws ......................................55Metal to Metal Screws ...............74-78, 81-83Metal To Wood Screws .......................78, 80Olympic Rivets ...........................................91Painting of Screws & Rivets ................93, 95Panel Fastener ..........................................84Pins (Insulation Hanging) ..........................55Plymetal Screws ........................................79Pole Barn Screws ......................................80Protective Caps for Screw Points ..............89Pull-Out Tester ..........................................90Purlin Fasteners ........................................84Quik Drive Auto-Feed ................................89Rivets ....................................................91-93Roofgrip ...............................................79, 84Rosie the Riveter .......................................92Scots..........................................................86Screws for Aluminum.................................87Scrubolt Fasteners ....................................95Seal Tester ................................................90Selfdriller Engineering Data .......................73Selfdriller Selector Guide ......................74-83Self-Drilling Screws ..............................73-83Self-Tapping Screws ............................81-82Stainless (410) Self-Drilling .......................86Stainless Cap Head ...................................86Staples.......................................................54Stout T-5s ..................................................88Structural Bolts ..........................................94Tamper-Proof Screws..........................75, 77T-5 ...........................................73, 75, 77, 88Tek Screws ................................................86Type ‘A’ or ‘B’ Carbon or Stainless .......80-81Wafer Head Screws...................................85Wood To Metal Screws .............................79Zinc Headed Screws .................................86Zip-in Screws .............................................89

FLASHINGSClosures ....................................................53Cobra Ridge Vent ......................................53Colored Dyna-Flash Pipe Boots ................63Dek-Cap ....................................................63Dekstrip .....................................................64Dektite .......................................................63Drains ........................................................65Drop-Stop .............................................56-57Dyna-Flash Pipe Flashings...................61-63Dyna-Clamps .............................................68Dyna-Clips .................................................66Dyna-Corr ..................................................69Dyna-Guard ..........................................66-70Dyna-Mount ...............................................69Expansion Joint Covers .............................64FlashDek ...................................................64Pipe Flashing, Dyna-Flash ...................61-63Retrofit Dektite ...........................................61Ridge Vent .................................................53Roof Drains................................................65Roof Pipe Supports ...................................65Roof Vents .................................................65S-5! Closeouts ...........................................70Sno-Dam ...................................................69Snofence ...................................................70Snow Retention System .......................66-70Snow Shoes ..............................................67Vents .........................................................65

HAND TOOLSAmerican Lock .........................................123Automatic Levels ...............................24, 118Bags, Plastic ..............................................52Bar Clamps ..............................................105Batteries (Energizer)................................109Bendmore Hemming Tool.................111-112Bit Tip Holders ...........................................71Bolt Cutters ..............................................109Boxes (Hand Tool).....................................24Brooms (Push)...........................................45Buck Knives .............................................126Bull Pins...................................................115Butyl Tape Applicator ................................60Cable Pullers ...........................................116Calculator ................................................108Canvas Tool Bag .....................................125Car Reamer .............................................103Caulk Guns ....................................17, 29, 60C-Clamps ...........................................99, 119Chain .......................................................116Chain Hoist ..............................................116Chalk .......................................................120Channellock .............................................113Chucks (Jacobs) ......................................103Clamps ......................................68, 104, 119Compo-Cast Hammers ............................109Concrete Tools (Kraft) .............................121Coolers (Gott) ..........................................126Cooper Tools ....................................107-110Crayons (Lumber)....................................120Crescent Wrench .....................................109CST Berger..............................................118Cups (Paper) ...........................................126Custom Leather Craft ..............................125Dead Blow Hammer ................................109Delta Boxes .............................................122Drywall Tools (Kraft) ................................121Dynafind Hole Finder .................................95Electrical Tape ...........................................55Empire Level............................................119End-Cutting Pliers....................................113Flashlights (Eveready) .............................109Floodlights ................................16, 34, 46-47Folding Tool .............................................111Foot Wear ................................................130Gang Box (Jobox)....................................122Gloves .....................................................127Gott ..........................................................126Grippers (Foot Wear) ...............................130Ground Fault Interrupters..........................47Hacksaw Frames ..................................CALLHammers .................................................109Hand Cleaner ..........................................127Hemming Tool ..................................111-112

Hex Key Sets ...........................................105Hoists .......................................................116Hoist, Chain .............................................116Hole Finder (Dynafind) ..............................95Inkzall Marker ..........................................120Jacobs Chucks ........................................103Jet Tools ..................................................116Jobox .......................................................122Kimberly-Clark .........................................127Klein..........................................113-115, 125Knee Pads ...............................................125Knives (Sarge) .........................................126Knives (Utility) .........................................106Kraft .........................................................121Krylon ......................................................103Kynar 500 Paint Pen................................120Ladders.................................................50-51Laser..................................................24, 118Leather Goods .........................................125Lenox ....................................................48-49Levels (Automatic) .............................24, 118Levels (Bubble)........................................119Levels (Laser) ....................................24, 118Lights (Flood)...........................16, 34, 46, 47Locks (Master) .........................................123Lufkin .......................................................107Lumber Crayons ......................................120Magnetic Sweeper ...................................121Markers ....................................................120Master Lock .............................................123Measuring Tapes ..............................106-107Metal Cutting Blades ........11, 13, 40, 42, 44, 48Metric Tools .............................................107Midwest Snips .........................................111Motorola Radios ......................................108Nutdriver Sets ...................................105-106Nut Runners ..............................................71Nylon Strap Hoist Puller ..........................116Open End Wrenches ...............................114Paint (Upside Down)................................103Paint Pen .................................................120Paint Sticks ..............................................120Panel Shear (Swenson)...........................112Paper Cups..............................................126Paper Towels...........................................127Payload Plus............................................122Pipe Wrenches ........................................108Plastic Shipping Bags ................................52Pliers ................................................104, 113PLS Lasers ..............................................118Proto .................................................114-115Pry Bar ..............................................114-115Pull-Out Tester ..........................................90Radios (Motorola) ....................................108Rain Gear .............................................CALLRatchet Tie Down Straps.........................116Ratchet Wrenches ............................114-115Rebar Bender/Cutter .........................39, 114Rethread Dies............................................96Rigger Gloves ..........................................127Rivet Tools...........................................91, 93Rope ........................................................117Rope (Wire) .............................................117Rubbermaid .............................................126Sandals (Slip Resistant) ..........................130Sarge Knives ...........................................126Scaffold (On Wheels) ................................51Scratch Awl..............................................115Screwdrivers ............................................105Seal-Tester (For Screws) ..........................90Shackle ....................................................117Sheet Metal Gloves .................................127Shoes (Slip Resistant) .............................130Shop Rags ...............................................127Shovels ....................................................100Slasher Steel Cutting Blade.......................44Sledge Hammers .....................................109Slings .......................................................116Snips (Irwin) .............................................111Snips (Midwest) .......................................111Snips (Wiss) ............................................110Socket Sets .....................................106, 124Sprayon ...................................................103Spring Clamps .........................................104Stabila Levels ..........................................119Stanley.....................................................106Staplers .....................................................54

Swenson Shear .......................................112Tapes.........................................................55Tarps .......................................................108Thread Restorer ........................................96Tie-Down Straps ..............................108, 116Tie-Wire Reel ...........................................125Tool Belts.................................................125Torque Wrench ........................................115Torx Bits for Scrubolts .............................124Touch-up Paint ........................................120Towels, Paper..........................................127Trash Bags ................................................52Trowels (Concrete) ..................................121Truck Boxes.............................................122True Temper ......................................51, 109Upside Down Paint ..................................103Unibit .......................................................105Utility Knives ............................................106Versa-Bender ..........................................112Versa-Hemmer ........................................112Vise Grip ...........................................104-105Vises ........................................................119WD-40 .....................................................126Welding Equipment .................................128Wire Rope................................................117Wiss .........................................................110Wobble Lights ............................................46Wonder Bar .............................................115Wrenches ..................106, 108-109, 114-115Zinc-Rich Metal Protection ......................103Zipper Plastic Bags....................................52

POWER TOOLSAir Inflator ..................................................24Band Saw ......................................10, 19, 33Beam Cutter ..............................................27Bench Grinder ...........................................26Black & Decker .......................................4-27Blower..................................................24, 37Bosch...................................................12, 38Caulk Guns ....................................17, 29, 60Chain Saw ...........................................27, 35Chipping Hammers ......................................9Compound Miter Saw ..........................27, 35Compressor ...............................................25Concrete Vibrator ......................................25Cordless Tools......................................16-37Cut-Off Machine .......................32, 36, 38-39Demolition Hammers ...................................9DeWalt ....................................................4-27Die Grinders ........................................26, 32Drills (1/4”, 3/8” & 1/2”) ............................6, 7Drywall Cut-out ......................................4, 17Dust Extractor ..................................9, 26, 30Electrician Tools ........................................25Fans.........................................................124Fein......................................................12, 41Floor Saw ..................................................40Foam Gun..................................................52Generac Generator....................................46Grease Gun ...............................................25Grinders (Angle; 4” to 9”) ....... 15, 25, 32, 36, 38, 39, 41Hammer Drills ...............................8-9, 20, 30Heat Gun .............................................24, 34Heaters ....................................................124Hitachi..................................................12, 39Hoists .......................................................116Husqvarna .................................................40HVAC Pittsburgh Seam Locker ...............112Impact Wrenches..................5, 20, 29, 34, 37, 39Jancy .........................................................14Jet Tools ..................................................116Kett Tools ..................................................13Magnetic Drill Presses ...............................14Makita Tools ........................................36, 37Metabo.................................................38, 42Metal Cutting Saws............26, 31, 33, 35-36, 44Milwaukee Tools ...................................28-34Motorola 2-Way Radios ...........................108Nibblers ...................................12, 30, 36, 39Olympic Rivet Tools .............................91, 93Panasonic Tools ...................................CALLPittsburgh Seam Locker (Trumpf) ...........112Plasma Cutting Machine............................39Porter-Cable ..............................................27Power Distribution Box ..............................47Prazi ..........................................................27

TABLE OF CONTENTSCalifornia Residents:

WARNING Cancer and/or Reproductive Harmwww.p65Warnings.ca.gov

ORDER ON-LINE @ DYNAMICFASTENER.COM

©2020 DYNAMIC FASTENER SERVICE, INC. ALL RIGHTS RESERVED. No copying permitted without written authorization from an officer of Dynamic Fastener. NOTE: Product illustrations that appear in this catalog are not intended to depict the actual size of the merchandise. Specifications and engineering data of items shown herein have been carefully checked for correctness at the time of publication. But due to potential human error and because substantial changes occur at the manufacturer level from time to time, Dynamic Fastener Service, Inc. makes no warranty, express or implied, as to the accuracy of the information in this catalog. When firm data is needed, please call us toll free and we will be happy to provide firm current data. Dynamic Fastener and its employees makes no warranty or representation of any kind, express or implied, including no warranty of merchantability or fitness for any particular purpose, with respect to any of its products or services. If a claim arises against Dynamic Fastener under any circumstances then in no event will Dynamic Fastener’s liability exceed the purchase price of the specific products or services to which the claim is made.

COOL CANVAS!COOL CANVAS!

Bosch...............................38DeWalt ..........................4-27Fein Nibbler ...............12, 41Generac ...........................46Hitachi........................12, 39Husqvarna .......................40Jancy ...............................14Kett Shears ......................13Makita .........................35-37Metabo.............................38Milwaukee...................28-34Olympic Rivet .............91-92Porter-Cable ....................27Skilsaw ............................35Trumpf ................12-14, 112

TOOL MANUFACTURERS

D110K.............. 6D112 ................ 6D115K.............. 6D210G ............. 6D215G ............. 7D216G ............. 6D220 ................ 6D520 ................ 8D25133K.......... 8D25263K.......... 8D2533K............ 8D25416K.......... 8D25481K.......... 8D25553K.......... 9D25603K.......... 8D25604K.......... 8D25614K.......... 8D25652K.......... 8D25733K.......... 9D25773K.......... 9D25810K.......... 9D25831K.......... 9D25832K.......... 9D25872K.......... 9D25901K.......... 9D26950 .......... 24D25960K.......... 9D25980K.......... 9D28499X........ 15D28710 .......... 26D28715 .......... 26DC012 ........... 16DC527 ........... 16DCA1820 ....... 17DCA2203C .... 17DCB090 ......... 16DCB104 ......... 17DCB1800 ....... 17DCBL720P1... 24DCC020IB ..... 24DCC2560T1... 25DCCS620B .... 18DCD460T2..... 21DCD708C2 ...... 7DCD709C2 ...... 7DCD710S2 ...7 & 16DCD740C1 ...6 & 25DCD771C2 ...... 7DCD796D2 ...7 & 20

DCD980M2 .... 20DCD985M2 .... 20DCD991P2 .... 20DCD995M2 .... 20DCD996P2 .... 20DCE150D1 .... 25DCE151TD1 ... 25DCE200M2K ... 25DCE350M2 .... 25DCE400D2 .... 25DCE511B....... 16DCE531M1 .... 25DCE560D1 .... 17DCE580D1 .... 17DCE700X2..... 21DCF620D2/M2 ... 17DCF622M2 ...4 & 20DCF624P2 ..... 20DCF680N2..... 25DCF681N2..... 25DCF880M2 ...5 & 20DCF883M2 .... 20DCF885C2..... 20DCF887M2 .... 22DCF889M2 .... 20DCF890M2 ......20DCF894P2 ..........20DCF897P2 ...5 & 20DCF898P2 ......... 20DCF899P2/HP2 .. 20DCG412P2 .... 25DCG413R2/FR2 .. 25DCG414T2 .... 21DCG426M2.... 26DCGG571M1 ...25DCH133M2 .... 19DCH263R2 .... 19DCH273P2 .... 19DCH293R2 .... 19DCH481X2 .... 21DCH614X2 .... 21DCH733X2 .... 21DCH773Y2 .... 21DCK233P2..... 22DCK240C2 .... 22DCK263D2 .... 22DCK267M2 .... 22DCK283D2 .... 22DCK287D2 .... 22

DCK290L2 ..... 23DCK292L2 ..... 23DCK294P2..... 22DCK299P2..... 23DCK299D1T1 ...23DCKTS299P2 ...23DCK494P2..... 23DCK498P2..... 23DCK590L2 ..... 23DCK594P2..... 23DCK694P2..... 23DCK695P2..... 23DCL040/043/044 .. 16DCL050/060 .. 16DCL061 ......... 16DCL070T1 ..... 16DCL074 ......... 16DCL079B/R1 .. 16DCN660D1 .... 17DCN692M1 .... 17DCN890P2 .... 17DCR006 ......... 16DCR015 ......... 16DCR018 ......... 16DCR025 ......... 16DCS331B....... 27DCS350D1 .... 17DCS355D1 .... 25DCS361M1 .... 27DCS367P1..... 19DCS369P1..... 19DCS371P1..... 19DCS373P2..... 19DCS374P2..... 19DCS376P2..... 19DCS380P1..... 19DCS387P1..... 19DCS388T2 ..... 21DCS391P1..... 19DCS491M2 .... 17DCS494M2 .... 17DCS520ST1 ...21DCS551D2 ...4 &17DCS570P1...10 & 19DCS575T2 ..... 21DCS577X1..... 21DCS690X2..... 26DCS7485T1 ... 21DCV580H ...... 17

DCV581H ........ 9DCV585B....... 26DHS716AT2 ...27DHS790AT2 ...27DWARA100 ... 26DWARAFS ..... 26DWASHRIR ... 26DW083K ........ 24DW088K/LG/LR ..24DW089K/LG .. 24DW0822LG .... 24DW0825LG .... 24DW120K .......... 7DW124............. 7DW130V .......... 7DW160V .......... 6DW217............. 6DW222............. 6DW223G .......... 6DW235G .......... 7DW245............. 7DW246............. 7DW252............. 5DW255............. 5DW257............. 5DW267............. 4DW268............. 4DW269............. 4DW272............. 5DW276............. 5DW281............. 4DW284............. 4DW292............. 5DW293............. 5DW294............. 5DW311K ........ 10DW317K ........ 10DW331K ........ 10DW505............. 8DW511............. 8DW660............. 4DW713........... 27DW715........... 27DW716........... 27DW756........... 26DW758........... 26DW840K ........ 15DW872........... 26DW888........... 26

DW896........... 12DW8500......... 26DWE304/E305 ...10DWE315K ...... 25DWE357 ........ 10DWE402 ........ 15DWE575/SB .. 10DWE1014 ........ 6DWE1622K .... 26DWE4011 ...... 15DWE4012 ...... 15DWE4120 ...... 15DWE4214 ...... 15DWE4222 ...... 15DWE4517 ...... 15DWE4557 ...... 15DWE4559N.... 15DWE4597N.... 15DWE4599N.... 15DWE4887/N... 26DWE4997VS/NVS ..26DWE43066 .... 15DWE43114 .... 15DWE43115 .... 15DWE43116 .... 15DWE43131 .... 15DWE43140 .... 15DWE43144 .... 15DWE43214N...15DWE43244N...15DWE43265N...15DWE46103 .... 15DWE46153 .....15DWE7491RS ...27DWFP55126 ....25DWM120........ 10DWP611 ........ 27DWS535B ...... 10DWS709 ........ 27DWS780 ........ 27DWV010/012 ..9 & 26Bare Tools ....... 18Batteries ........ 18Chargers ........ 18Cordless Combo Packs ..... 22, 23Flashlights ..... 16ToughSystem Storage ....... 24

DeWalt’s INDEX OF POWER TOOLS BY PART NUMBER

Gatorade...............................................126Guardian Safety............................ 134-135Hard Hats .............................................128Hearing Protection ...............................129Lanyard for Personnel .................. 132-139Lanyard for Tools..................................137LED Head Light ........................16, 34, 128Lifeline Devices (Safety) ............... 132-139Metal Roof Walkway ...............................98Orange Safety Fence ...........................130Reflective Tape.....................................131Respirator .............................................128Retractable Lanyard ..................... 132-139Roof Anchors ........................ 132-135, 137Rope Grab ............................................137Rope, Lifeline........................................137Safety Cans (Gas) ................................132Safety Equipment ......................... 128-139Safety Glasses .....................................129Safety Harness ............................. 132-139Safety Light...........................................131Safety Sleeves......................................127Sala (DBI) Fall Protection ............. 137-139Screw Tip Protective Caps .....................89Self-Retracting Lifeline ................. 132-139Sky Web II ............................................130Skylight Fall Protection ...........................98Sqwincher .............................................126Standing Seam Roof Tie Off......... 133-134Stake Flags...........................................103T-Shirts .................................................136Tool Lanyard.........................................137Vests, Safety ........................................136Winter Liners (for Hard Hats)................128

SEALANTS & TAPESAcrylic Foam Bond Tape ........................52Backer-Rod Foam Filler..........................58Battery Caulk Guns ....................17, 29, 60Butyl Tape ..............................................60Butyl Tape Applicator .............................60Caution Tape ........................................136Closures ...........................................53, 64Colored Caulk .........................................59Drop-Stop ......................................... 56-57Duct Tape ...............................................55Dyna-Seal ......................................... 56-57Emseal Foam Closure ............................64Fire Stop .................................................46Foam Insulation ......................................52Foamable Adhesive ................................52Froth-Pak ................................................52Gutter & Seam Sealant...........................59High Bond Tape......................................52Insulation Hanging Pins ..........................55

Shims ......................................................45Sika Sealants..........................................58Spray Foam Insulation............................52Spray (Metal Protection) .......................103Tapes, Adhesive ......................... 52, 54-55Titebond Caulk .......................................59Tube Caulk .................................53, 58, 60Vulkem Sealants................................CALLZinc-Rich Metal Protection ..................103

Insulation Tapes ...............................54, 64Kynar 500 Paint Pen.............................120 Metacaulk Firestop .................................46Paint Pen ..............................................120Patching Tape ........................................53Peel & Seal .............................................53Reflective Tape.....................................131Roll Caulk (Butyl Tape)...........................60Sealing Washers ....................................95

DYNAMIC FASTENERknocks out the competition!

Rebar Bender/Cutter ......................39, 114Rebar Trying Tool ...................................37 Rivet Tool (Battery).....................31, 91, 93Rotary Cutter (Drywall) .......................4, 17Rotary Hammers .... 8-9, 19, 21, 30, 36, 38Router .....................................................27Sanders ..................................................27Sanders (Angle)......................................15Saws ..............10, 19, 21, 26-27, 31-33, 36-42Scruguns (Drywall) ...................................5Scruguns (Sheet Metal) ............................4SDS/Max Hammer ..............................9, 38Seam Locker ........................................112Shear Wrench.........................................37Shears ............................13, 17, 30, 36, 39Shop Vac ..........................................17, 24Skil ..........................................................35Slugger Mag Press/Cutters ....................14Table Saw.........................................21, 27Target Equipment ...................................40Threaded Rod Cutter ..............................17Trumpf Power Tools ................. 12-14, 112Welding Systems ....................................39Wood Working ........................................27Wet/Dry Vac .....................................17, 24

POWER TOOL ACCESSORIESAbrasive Blades......................................42Adapters for Hammer Bits ....................101Adapters/Extensions for Sockets............71Band Saw Blades ...................................11Beam Cutter ...........................................27Bit Tip Holders ........................................71Blades........... 11, 26, 31, 40, 42-44, 48, 71Carbide Tipped Masonry Bits ...............101Car Reamer ..........................................103Chisels ..................................................101Cord (Extension).....................................47Core Bits .........................................43, 101Cup Brushes (Wire) ................................45Diamond Blades ............................... 42-43Diamond Core Bits .................................43Drill Bits for Sheet Metal ............... 102-103Extensions/Adapters for Sockets............71Ground Fault Interrupter .........................47Hammer Bits .........................................101Hole Saw Bits .........................................49Jacobs Chucks .....................................103Lenox ................................................ 48-59Mag Press Bits .......................................14Nut Runner Sockets ...............................71Phillips Bits .............................................71Polar/Solar Cord .....................................47Punches & Dies (Nibbler) .......................12Rethread Dies.........................................96Safety Cans ..........................................132Safety Equipment ......................... 128-139Saw Blades (71/4”) ...................................11Shear Blades (replacement) ...................13Slasher Saw Blades ...............................44Slotted Bit ...............................................71Steel Decking Blade ...............................40Sockets, Adapters/Extensions ................71Taps & Dies ..........................................103Torx Bits For Scrubolts .........................124Wire Brushes ..........................................45

SAFETY PRODUCTSBar Guards ...........................................131Bombers Jacket ....................................136Caution Tape ........................................136Delineator Post & Flag Line .......... 135-136DBI/Sala Fall Protection ............... 137-139EarPlugs ...............................................129Eye Glasses (Safety) ............................129Fall Protection............................... 132-139Fence (Orange Safety) .........................130Fire Extinguisher...................................132First Aid Kits .........................................131Gas Can (Safety) ..................................132

Table of Contentsfrom page 2

California Residents: WARNING Cancer and/or Reproductive Harm

www.p65Warnings.ca.govPOWER TOOL INDEX

Photo Credit:CatsEye Photography

CALL 800-821-5448 OR FAX 800-844-1199 Impact-Tested is a trademark of Dynamic Fastener Service Inc.

20V MAX*Cut-OutToolDCS551D2Tool-free bit change. Fast cutting in drywall, acous-tical ceiling tiles, plywood, etc. LED light.

Standard equipment: Two 20V MAX* 2.0 A-H batteries (DCB203), fast charger, 1/4” and 1/8” collet diameter, belt hook, carrying bag.

Specifications: 26,000 RPM no-load speed. Tool wt. 3.1 lbs.

SPECIAL PRICE Call

Cut-OutToolDW660 Tool-free bit change, removable shoe, dust-sealed turn-on/bump-off switch.

Standard equipment: Drywall cutting bit, 1/4” and 1/8” collets.

Specifications: 5-amps (120V, AC only), 30,000 RPM no-load speed, 3.2 lbs. tool wt., 3.5 lbs. shipping wt.

REGULAR PRICE $108.95ANY QUANTITY $58.15

Heavy Duty VSR Positive-Clutch Power UnitDW284 Threaded clutch housing/adapter for mounting to roofing or auto-feed attachments.

Specifications: 6.5-amps (120V, AC only); 0-2,500 RPM no-load, 132 in-lbs. torque, 540 max watts out, 3.3 lbs. tool wt., 3.7 lbs. shipping wt.

REGULAR PRICE $244.50SPECIAL PRICE $139.85

6+ MIX OR MATCH $131.45

Heavy Duty VSR Positive-Clutch® ScrugunDW281 Positive clutch gives operator complete control; bit torque increases as operator increases forward pressure.

Standard equipment: 1/4” quick change bit chuck.

Specifications: 6.5-amps (120V, AC only), 0-2,500 RPM no-load, 132 in-lbs. torque, 540 max watts out, 3.4 lbs. tool wt., 4.2 lbs. shipping wt.



Adjustable TorqueSelf-Drilling ScrewdriverNo. 6780-20Specifications: 6.5-amps (120V, AC only), 0-2,500 RPM no-load VSR, max torque 140 in-lbs., tool wt. 3.8 lbs.



D•F® ULTRA-PREMIUM IMPACT-TESTED™ NUT RUNNERS

Higher quality • Lower prices Wider selection • Deeper inventory

ALL WITH MAGNET 1/4” 5/16” 3/8”LENGTH 10 100 10 100 10 100

1-3/4” $2.15 $1.50 $2.15 $1.50 $2.35 $1.652-9/16” 2.50 1.75 2.50 1.75 2.65 1.854” 3.85 2.70 3.85 2.70 4.15 2.906” 5.35 3.75 5.50 3.85 5.90 4.1512” 13.20 9.25 15.65 11.00 16.85 11.85

Note: Combining very high torque and long length will severly hurt the life expectancy of most any item; the nipple on the male end will shear off of the 12” socket typically after drilling 250-300 #12 dia T-3 screws into .210” thick steel. Your results may vary.

20V MAX* XR Versa-Clutch™ScrewgunDCF622M2 See top of pg 18 for money saving offer. Comparable torque adjustment system to the DW268 above. Versa-Clutch™ Adjustable Torque System to help prevent damage to material and fasteners. Brushless motor. LED light.

Standard equipment: Two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB101), carrying bag.

Specifications: 0-2,000 RPM no-load speed, 1/4” quick release hex drive, 2.8 lbs. tool wt., 8.2 lbs. shipping wt.

SPECIAL PRICE Call

ExcitingNew Tool

Heavy Duty VSR Versa Clutch®

Teks Scrugun, DW268 Versa-Clutch® torque adjustment system allows you to “dial” the proper torque needed to efficiently drive fasteners without stripping or breaking the fastener.

Specifications: 6.5-amps (120V, AC only), 0-2,500 RPM no-load. 132 in-lbs. torque, 540 max watts out, 3.7 lbs. tool wt. ignoring cord, 4.9 lbs. shipping wt.



Heavy Duty VSRVersa-Clutch®

ScrugunDW267Very similar to our most popular scrugun DW268 pictured at right, this tool is 0-2,000 RPM not 0-2,500 RPM as is the DW268.

Specifications: 6.5-amp (120V, AC only), 0-2,000 RPM no-load, 164 in-lbs. torque, 540 max watts out, 3.7 lbs. tool wt., 4.8 lbs. shipping wt.



Heavy Duty VSR Versa-Clutch® Scrugun for T-5sDW269 This low RPM/high torque tool is ideal for fastening T-5s into 1/4” and thicker steel. (See page 82 for a special offer).

Specifications: 6.5-amps (120V, AC only), 0-1,000 RPM no-load, 344 in-lbs. torque, 540 max watts out, 3.7 lbs. tool wt., 4.8 lbs. shipping wt.



SCRUGUNS FOR SHEET METAL


Drywall Scrugun DW255/DW2526-amp motor and high-speed transmission allows for excellent drywall hanging production. Standard clutch. The DW255 has a no-load speed of 0-5,300 RPM while the DW252 has a no-load speed of 0-4,000 RPM. Either tool – same price.

Specifications: 6-amps (120V, AC only), 0-5,300 RPM no-load, for DW255 and 0-4,000 RPM for DW252, VSR, 510 watts out, 2.9 lbs. tool wt., 4.1 lbs. shipping wt.



Drywall ScrewdriverDW2726.3-amp motor for superior power and overload capacity. The DW272 comes with a standard clutch and a “set and forget” nosepiece for con-sistent fastener depth. To order this tool with the added convenience of a permanently attached 50’ two prong extension cord with a twist-lock plug then order the DW272WT.

Specifications: 6.3-amps (120V, AC only), 0-4000 RPM no-load VSR, 520 watts out, 3.1 lbs. tool wt., 4.1 lbs. shipping wt.

SPECIAL PRICE CallWith 50’ cord (272WT) Add $20

3/4” Impact WrenchDW294 This lag bolt screwdriver is a very low priced 3/4” impact wrench. Socket retention system is the detent-pin style.

Specifications: 7.5-amps (120V, AC/DC), max torque 345 ft-lbs., 2700 IPM, 2100 RPM no-load, reversible, 7.0 lbs. tool wt., 9.2 lbs. shipping wt.



1/2” Impact WrenchDW293 Ring detent (or hog-ring) retainer for quick, easy socket change.

This tool is best suited strictly for ground level applications. Sockets will slip off of this tool’s “ring-detent” vs. the secure fit of the “pin-detent” featured on the DW292 pictured above.

Specifications: Same as DW292 pictured top right of this page.



D•F® Extensions for 1/2” Sq Dr Impacts

1/2” Sq Dr to 1/2” Sq Dr - with pin lock.

ANY MIX ANY MIXPART # LENGTH 1-9 10-24 25+

XSQ88-3 3” $ 7.20 $ 6.55 $ 5.95XSQ88-5 5” 9.25 8.40 7.65XSQ88-7 7” 13.90 12.65 11.50XSQ88-10 10” 17.25 15.70 14.25

SQ. 1-4 5+PART # DR. PCS. LENGTH PRICE PRICE

2651 1/2” 13 Deepwell $ 96 $ 862824 1/2” 24 Deepwell 211 189

2824

Socket SetsSee pg 124 for six sets offered.

Keyless Chuck1/2” keyless chuck with 1/2” sq dr – allows drilling with an impact wrench. Can only drill forward. Made in U.S.A.

JC1200 $69.95

Drywall/Framing ScrewdriverDW276 6.5-amp motor and high torque provides superior power and overload capacity.

Specifications: 6.5-amps (120V, AC only), 0-2,500 RPM no-load, VSR, 540 watts out, 3.6 lbs. tool wt., 5.3 lbs. shipping wt.



Deck/Drywall ScrewdriverDW257 Ideal for drywall, plywood roof decking, siding, flooring and wire lath to 14-20 gauge metal studs.

Specifications: 6.2-amps (120V, AC only) 0-2,500 RPM no load speed, VSR, 3.5 lbs. tool wt., 4.2 lbs. shipping wt.



1/2” Impact WrenchDW292 345 ft. lbs. max torque in forward and reverse. AC/DC forward/reverse rocking switch. Detent pin anvil for more secure socket retention.

Specifications: 7.5-amps (120V, AC/DC); 2100 RPM no-load speed, reversible, 2700 impacts per minute; tool wt. 7.0 lbs., ship-ping wt. 8.8 lbs.



20V MAX*Li-ionImpactWrenchDCF880M2 See top of pg 18 for FREE offer. 1/2” square drive with detent pin with max torque 150 ft-lbs.

Standard equipment: Two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB101), carrying case.

S p e c i f i c a t i o n s : 0 - 2 , 3 0 0 R P M n o - l o a d s p e e d , 0 -2 ,700 IPM, max to rque 150 f t - lbs . , 3 .4 lbs . too lwt., 8.7 lbs. shipping wt.


20V MAX* 3/4” Impact WrenchDCF897P23-speed transmission. 3/4” hog ring retention. LED light.


Specifications: 0-400, 0-1,200, or 0-1,900 RPM no-load speed, 0-2,400 IPM, max torque 700 ft-lbs., 7.2 lbs. tool wt.,12.3 lbs. ship-ping wt.

SPECIAL PRICE Call

DRYWALL SCRUGUNS & IMPACT WRENCHES

CALL 800-821-5448 OR FAX 800-844-1199

1/2” VSR Drill DWD210G10.0-amp motor. Anti-slip pistol grip design.

Standard equipment: 360° locking side handle, keyed ch.ey with holder.

Specifications: 10-amp (120V, AC only), 0-1200 RPM VSR, 980 max watts out, 4.9 lbs. tool wt., 6.8 lbs. shipping wt.

SPECIAL PRICE $126.50

1/2” VSR Drill DWD220E-Clutch Anti-Lock Control monitors current to the motor and shuts tool down in lock-up situations.

Standard equipment: 360° locking side handle with soft grip, chuck key with holder.

Specifications: 10.5-amps (120V, AC only) 0-1200 RPM VSR no load, 980 watts out, 4.9 lbs. tool wt., 6.8 lbs. shipping wt.



1/2” VSR Drill DWD216G10.5-amp motor. Keyed chuck.

Standard equipment: 360° locking side handle, keyed chuck, chuck key with holder.

Specifications: 10.5-amp (120V, AC only), 0-1200 RPM VSR no-load, 1100 max watts out, 5.2 lbs. tool wt., 6.8 lbs. shipping wt.

REGULAR PRICE $261SPECIAL PRICE $138

6+ MIX OR MATCH $129

3/8” VSR Drill DWE10147.0-amp motor. Keyed chuck. Lock-on switch.

Specifications: 7-amp (120V, AC only), 0-2800 RPM VSR no-load, 440 max watts out, 3.6 lbs. tool wt., 3.9 lbs. shipping wt.



3/8” VSR DrillDW223GDIN nose allows for side handle or rig mount. Three wire grounded cord and plug.

Standard equipment: chuck key, chuck key hold-er.

Specifications: 7-amps (120V, AC only), 0-1200 RPM no-load VSR, 560 out watts, 3.6 lbs. tool wt., 4.5 lbs. shipping wt.



3/8” VSR DrillDW222Keyless chuck for quick and easy bit changing.

Specifications: 6.7-amp (120V, AC only), 0-1,200 RPM no-load VSR, 520 watts out, 3.3 lbs. tool wt., 4.1 lbs. shipping wt.



20V MAX* 3/8”Li-ionRight Angle DrillDCD740C12-speed ranges. 3/ 8” ratcheting chuck. Multi-grip trigger.

Standard equipment: One 20V MAX* 1.5 A-H battery (DCB201), charger (DCB101), belt hook, carrying case.

Specifications: 0-650 or 0-2,000 RPM no-load speed, 360 max watts out, 3.8 lbs. tool wt., 10.4 lbs. shipping wt.



3/8” Right Angle DrillDW160V

Standard equipment: chuck key, chuck key holder, paddle switch.

Specifications: 4-amps (120V, AC only), 0-1200 RPM no-load VSR, 3.4 lbs. tool wt., 3.4 lbs. ship-ping wt.



3/8” VSR DrillDWD115K8.0-amp motor. All-metal keyless chuck for greater durability. Anti-slip grip. Includes carrying case.




3/8” VSR DrillDWD110K8.0-amp motor. Keyless chuck. Anti-slip grip. Includes carrying case.

Specif ications: 8-amp (120V, AC only) , 0-2500 RPM VSR, 650 max watts out, 4.1 lbs. tool wt., 6.4 lbs. shipping wt.

SPECIAL PRICE Call

3/8” VSR DrillDWD1128.0-amp motor. All-metal keyless chuck for greater durability. Anti-slip grip.




1/4” VSR DrillDW217Designed for small diameter holes in light-gauge steel.

Standard equipment: chuck key, chuck key hold-er.

Specifications: 6.7-amp (120V, AC only), 0-4000 RPM no-load VSR, 510 watts out, 3.2 tool wt., 4.1 lbs. shipping wt.



1/4”, 3/8” & 1/2” DRILLS


20V MAX* 1/2” CompactDrill/DriverDCD771C2Keyless ratcheting chuck. Adjustable clutch with 16 settings.

Standard equipment: Two 20V MAX* compact 1.3 A-H batteries, compact charger, carrying bag.

Specifications: 0-450 or 0-1,500 RPM no-load speed, 300 max watts out, 6.8 tool wt., 9.0 lbs. shipping wt.

SPECIAL PRICE CallDCD780C2 (1.5 A-H) Call

12V MAX* 3/8”AdjustableClutch DrillDCD710S2

Single sleeve keyless ratcheting chuck with 15 settings. LED light.

Standard equipment: Two 12V MAX* Li-ion 1.3 A-H batteries (DCB120), 40 minute MAX* charger (DCB100), belt hook, carrying bag.

Specifications: 0-400 or 1,500 RPM no-load speed VSR, 189 max watts out, 2.4 lbs. tool wt., 5.0 lbs. shipping wt.



20V MAX* 1/2”CompactHammerdrillDCD709C2

Dual speed range. Ratcheting adjustable chuck with 15 settings. Lightweight at 2.5 lbs. 6.9” front to back.

Standard equipment: Two 20V MAX* compact 1.3 A-H batteries, compact charger, LED light, removable belt hook, carrying bag.


SPECIAL PRICE Call

20V MAX* 1/2”CompactDrill/DriverDCD708C2

Dual speed range. Ratcheting adjustable chuck with 15 settings. Lightweight at 2.4 lbs. 6.3” front to back.

Standard equipment: Two 20V MAX* compact 1.3 A-H batteries, compact charger, LED light, removable belt hook, carrying bag.


SPECIAL PRICE Call

1/2” VSR Spade-Handle DrillDW130V Standard equipment: Chuck key, chuck key hold-er, 2-position rear spade handle, 3-position side handle.

Specifications: 9-amps (120V, AC only), 0-550 RPM no-load VSR, 600 max watts out, 7.5 lbs. tool wt., 8.9 lbs. shipping wt.

SPECIAL PRICE Call

1/2” Joist and Stud Drill, DW124 Standard equipment: adjustable front handle, 2-position side handle, chuck key and chuck key holder, mechanical-slip clutch in low gear to pre-vent bit lock-up.

Specifications: 11.5-amps (120V, AC only) 300/ 1200 RPM no-load, 850 max watts out, 13.5 lbs. tool wt., 16.75 lbs. shipping wt. (kit 26.4 lbs.).



20V MAX* 1/2”Li-ionHammerdrillDCD796D2

Dual speed range. Metal 1/2” ratcheting chuck. LED light. Adjustable clutch with 14 settings. 7.5” front to back.

Standard equipment: Two 20V MAX* 2.0 A-H batteries (DCB203), charger (DCB101), belt hook, bit holder, carrying case.

Specifications: 0-550 or 0-2,000 RPM no-load speed, 0-34,000 BPM in max speed, 460 max watts out, 3.6 lbs. tool wt., 8.4 lbs. shipping wt.

SPECIAL PRICE CallDrill/Driver Kit (DCD791D2) Call

1/2” Right-Angle Drill Kit ReversibleDW120K Powerful 7.0-amp motor easily handles the popular 29/16” self-feed bit.

Standard equipment: Chuck key, chuck key hold-er,allen wrench, right-angle head, 5-position side handle with extension, tool box.

Specifications: 7-amps (120V, AC only). 400-900 RPM no-load speed, 600 RPM for straight line drilling. 9.75 lbs. tool wt., 17.5 lbs. shipping weight.



1/2” VSR DrillDW235GCompact, ergonomic design for easy use.

Standard equipment: 360° side handle, grounded wire, chuck key with holder.

Specifications: 7.8-amps (120V, AC only), 0-850 RPM no-load, 600 max watts out, 4.4 lbs. tool wt., 5.7 lbs. shipping wt.

SPECIAL PRICE Call

1/2” VSR Drill DW246Triple gear reduction provides increased torque and reduces gear stress.

Standard equipment: 360° side handle, keyless chuck with spindle lock.

Specifications: 7.8-amps (120V, AC only), 0-600 RPM no-load, 600 max watts out, 4.4 lbs. tool wt., 5.7 lbs. shipping wt.



1/2” VSR Drill DW245High output torque to drive larger diameter bits.

Standard equipment: 360° side handle, chuck key with holder.

Specifications: 7.8-amps (120V, AC only), 0-600 RPM no-load speed, 600 max watts out, 4.4 lbs. tool wt., 5.7 lbs. shipping wt.



1/2” VSR Drill DWD215G 10.0-amp motor. Automatic spindle lock. Anti-slip mid-handle grip.

Standard equipment: 360° side handle, keyless chuck with automatic spindle lock.

Specifications: 10-amps (120V, AC only) 0-1200 RPM VSR, 980 max watts out, 5.2 lbs. tool wt., 6.8 lbs. shipping wt.



1/2” DRILLS

CALL 800-821-5448 OR FAX 800-844-1199

See pg 101 for Hammer Drill accessories

Scaling Chisel

Scraping Chisel

Cold Chisel

Moil or Bull Point

Asphalt Cutter

Clay SpadeBushing

Head

13/4” SplineCombination Hammer D25652KConstant speed electronics maintain speed under load. E-Clutch® provides maximum control in bind-up situations. SHOCKS Active Vibration Control®

reduces vibration.

Standard equipment: 360° side handle, carrying case.

Specifications: 13.5-amps (120V, AC only), 210-415 RPM no-load speed, 1,430-2,840 BPM loaded, 8 joules impact energy, 15.5 lbs. tool wt., 24.4 lbs. shipping wt.

REGULAR PRICE $1,100SPECIAL PRICE $602


13/4” SDS Max Rotary HammerD25604K or D25603K

9.5 ft-lbs. of impact energy. SHOCKS Active Vibration Control® reduces vibration. D25603K has 2-stage clutch/E-Clutch® System which reduces reactionary torque in bind-up situations.

Standard equipment: Lock-on switch, 360° side handle, carrying case.

Specifications: 13.5-amps (120V, AC only), 210-415 RPM no-load speed, 1,430-2,840 BPM load-ed, 15.1 lbs. tool wt., 24 lbs. shipping wt.

D25604K D25603KREGULAR PRICE $1,009 $1,299SPECIAL PRICE $552 $6996+ MIX OR MATCH $519 $658

D25604

19/16” SDS Max Combination Hammer KitD25481K6.1 joules impact energy. SHOCKS Active Vibration Control® reduces vibration. Optimal con-crete drilling 1/2” to 11/8”.


Specifications: 10.5-amps (120V, AC only), 540 RPM no-load speed, 3,150 BPM loaded, 13 lbs. tool wt., 21.3 lbs. shipping wt.


6+ MIX OR MATCH $382D25501K (While supply lasts) $365

1” SDS VSRRotary Hammer D25133KThree modes: drill (with DW5351 adapter), chipping, or rotary hammer. 2.6 joules of impact energy.

Standard equipment: 360° side handle, depth rod, carrying case.

Specifications: 8-amps (120V, AC only) 0-1,500 RPM no-load speed VSR, 0-5,500 BPM no-load, 5.8 lbs. tool wt., 10.8 lbs. shipping wt.



11/8” SDS+ VSRRotary HammerD25333KSHOCKS-Active Vibration Control. 3.5 joules of impact energy. Three modes: drill, chipping, or rotary hammer. Compatible with HEPA Dust Extraction System (DWH304DH $149). Optimal drilling range between 3/16” and 7/8”.


Specifications: 8.5-amps (120V, AC only), 0-1,150 RPM no load speed VSR, 0-5,200 BPM no-load, 8.2 lbs. tool wt., 14.0 lbs. shipping wt.



CLOSEOUTBLOWOUTONLY 62

UNITS LEFT

11/8” SDS Rotary HammerRH228VC40 position vario-lock for chiseling. 3 modes of operation; rotary only, rotary and hammer, hammer only. Counter balance vibration control.

Standard equipment: Side handle, depth gauge, carrying case.

Specifications: 8-amps (120V, AC only), 0-1,300 RPM, 0-5,800 BPM, 23/4” max core bit size, 2.4 ft-lbs. impact energy, 6.9 lbs. tool wt., 11.7 lbs. shipping wt.


1/2” VSR HammerdrillDWD520Powerful 10.0-amp motor. 2 modes: hammerdrill or drill.

Standard equipment: Chuck key with holder, 360° side handle, depth rod.

Specifications: 10-amps (120V, AC only), 980 watts (max output), 0-1,200 or 0-3,500 RPM no load, 0-56,000 BPM, 6.0 lbs. tool wt., 11 lbs. shipping wt.

SPECIAL PRICE CallWith carrying case (DWD520K) Add $10

1/2” VSR HammerdrillDW511 or DW505

7.8-amp motor with overload protection. 2 modes: ham-merdrill or drill. DW511 is single speed 0-2,700 RPM no load, 0-46,000 BPM. DW505 has two speeds: 0-1,100 or 0-2,700 RPM no load, 0-19,000 or 0-46,000 BPM.

Standard equipment: Chuck key with holder, 360° side handle, depth rod.

Specifications: 7.8-amps (120V, AC only) 650 watts (max output). DW511 4.3 lbs. tool wt. 5.7 lbs. shipping wt. DW505 4.8 lbs. tool wt., 6.5 lbs. shipping wt.

DW511 DW505SPECIAL PRICE Call $1396+ MIX OR MATCH Call $130

with case (DW505K) Add $10

DW511

11/8” SDS VSR Rotary HammerD25263K11/8” SDS Rotary Hammer and your choice of a FREE DWE402 or DWE402N 41/2” Angle Grinder. Hammer has three modes: drill (with DW5351 adaptor), chip-ping, or rotary hammer. 3.0 joules of impact energy. SHOCKS-Active Vibration Control®. Grinders have 1,400 watt motor, Dust Ejection System™ and paddle switch.

Standard equipment: 360° side handle, depth rod.

Specifications: 8.5-amps (120V, AC only), 0-1,450 RPM no-load speed VSR, 0-5,350 BPM no load, 6.8 lbs. tool wt. Shipping wt. of both tools 14.3 lbs.

REGULAR PRICE $594SPECIAL PRICE Call

WHILESUPPLYLASTS

HAMMER DRILLS

11/8” SDS VSR Combination Rotary HammerD25416KThree modes: drilling, chipping or rotary ham-mer. 4.2 joules impact energy. SHOCKS Active Vibration Control® reduces vibration. E-Clutch® system which reduces reactionary torque in bind-up situations. 2-year free service warranty contract.


Specifications: 9-amps (120V, AC only), 0-820 RPM no-load speed VSR, 0-4,700 BPM no load, 9.2 lbs. tool wt., 15.0 lbs. shipping wt.



WHILESUPPLYLASTS13/4” SDS Max

Combination Hammer D25614K10.5 joules impact energy. Constant speed elec-tronics maintain speed under load. E-Clutch® reduces reactionary torque in bind-up situations. SHOCKS Active Vibration Control® reduces vibra-tion.


Specifications: 13.5-amps (120V, AC only) 190-380 RPM no-load speed VSR, 1,450-2,900 BPM no-load, 17.3 lbs. tool wt., 24 lbs. shipping wt.




19 LB SDS MaxDemolition HammerD25872KConstant speed electronics maintain speed under load. Variable speed dial. SHOCKS Active Vibration Control® reduces vibration. Soft start to help maintain control. Compatible with DWH052K dust extraction system.

Standard equipment: Auxiliary handle, kit box.

Specifications: 15-amps (120V, AC only), 1,350-2,705 BPM loaded, 13.3 joules impact energy, 1,600 max watts out, 19 lbs. tool wt., 31 lbs. ship - ping wt.

REGULAR PRICE $1,359SPECIAL PRICE $669D25981K (while supply lasts) $629

SDS MaxDemolitionHammer KitD25901K17.9 joules impact energy. 19 settings for variable impact control. One step chisel rotation (12 posi-tions). SHOCKS Active Vibration Control® reduces vibration. 2-year free service warranty contract.

Standard equipment: Variable position side handle, on/off rocker switch, kit box.

Specifications: 14-amps (120V, AC only), 750 max watts out, 1,020-2,040 BPM loaded, 17.9 joules impact energy, 21.6 lbs. tool wt., 36.5 lbs. shipping wt.


SDS MAXDemolitionHammer KitD25831K8.0 joules impact energy. 7 settings for variable impact control. SHOCKS Active Vibration Control® reduces vibration. 2-year free service warranty contract.

Standard equipment: Side handle, bit grease, carrying case.

Specifications: 13.5-amps (120V, AC only), 1,430-2,840 BPM loaded, 8.0 joules, impact ener-gy, 14 lbs. tool wt., 27 lbs. shipping wt.



OSHA Table 1 Compliant Dust Attachments

D25301D* Dust Extractor Telescope w/hose CallFor: D25052/D25133/D25260/D25262/D25263/DCH133DWH050K Large HammerDrilling Dust Extraction CallFor: D25413/D25416/D25501/D25553/D25601/D25603D25651/D25721/D25723/D25761/D25763DWH053K Large Hammer Chipping Dust Extraction CallFor: D25831/D25851/D25891/D25899/D25901/D25941DWH052K Breaker Dust Extraction CallFor: D25960/D25980DWH200D Tube Kit w/Hose $60For: SDS Rotary Hammers except D25416KDWH302DH Filter Box Assembly CallFor: Retrofits onto the D25303DHDWH303DH Onboard Dust Extractor CallFor: DCH273DWH304DH Onboard Dust Extractor CallFor: DCH293, D25333

DWH050K

40 LB 11/8” HexDemolition Hammer D25960KSHOCKS Active Vibration Control® reduces vibra-tion. Soft start to help maintain control. Compatible with DWH052K dust extraction system.

Standard equipment: Bull point chisel, wheeled kit box.

Specifications: 15-amps (120V, AC only), 1,460 BPM loaded, 35.0 joules impact energy, 1,600W max out, 40.5 lbs. tool wt., 65.3 lbs. shipping wt.

REGULAR PRICE $2,077SPECIAL PRICE $1,019

PavementBreakerw/HammerTruck & SteelD25980K52.0 joules impact energy provides maximum per-formance. Active Vibration Control reduces user fatigue. Hammer Truck provides easy mobility. 2-year free service warranty contract.

Standard equipment: Hammer truck with flat foot and pegged foot plate, one bull point chisel, 1” cold chisel, 3” wide chisel, two year free service contract.

Specifications: 15.0-amps (120V, AC only), 900 BPM loaded speed, 52.0 joules impact energy, 68.3 lbs. tool wt.

SPECIAL PRICE Call

HEPA DustExtractors

DWV012 (10 gal) 155 CFM or DWV010 (8 gal) 150 CFM - HEPA Dust Extractor powered by 15-amp motor. Table 1 O S H A c o m p l i a n t . Automatic Filter Clean for continuous operation. 15’ kink resistant hose. 2 HEPA filters included. See right for attachments.

DWV010 Call DWV012 CallDWV9330 Replacement HEPA Filter-2 pack 74.00

DWV9000 Universal Connector $19.85DWV9130 35mm Tool Adapter $9.75

DWV9400 Plastic Tank Liner-5 pack $13.95DWV9401 Paper Dust Bag-5 pack $13.95DWV9402 Fleece Dust Bag-5 pack $25.95

WET/DRY VACDCV581H - 2 gal wet/dry vac, 31 CFM, powered by 18V or 20V MAX* battery (not included - but see page 18 for FREE battery offer) or 120V AC. Reusable filter traps dust with 99.97% efficiency at 1 micron. 5’ crush resistant hose. Call

DWV010

12 LB SDS Max Chipping Hammer KitD25810K7.1 joules of impact energy. Constant speed con-trol electronics. SHOCKS Active Vibration Control® reduces vibration.

Standard equipment: 360° side handle, rocker switch, carrying case.

Specifications: 10.5-amps (120V, AC only), 3,150 BPM no-load speed, 7.1 joules impact ener-gy, 12.6 lbs. tool wt., 20.6 lbs. shipping wt.

SPECIAL PRICE Call

2” SDS MaxRotary Hammer D25773KConstant speed electronics maintain speed under load. E-Clutch® provides maximum control in bind-up situations. SHOCKS Active Vibration Control®

reduces vibration.

Standard equipment: Lock-on switch in chipping mode, 360° side handle, carrying case.

Specifications: 15-amps (120V, AC only), 145 -290 RPM no load speed, 1,105-2,210 BPM load-ed, 19.4 joules impact energy, 23.2 lbs. tool wt., 28 lbs. shipping wt.



13/4” SDS MaxRotary Hammer D25733KConstant speed electronics maintain speed under load. E-Clutch® provides maximum control in bind-up situations. SHOCKS Active Vibration Control®

reduces vibration.

Standard equipment: Lock-on switch in chipping mode, 360° side handle, carrying case.

Specifications: 15-amps (120V, AC only), 177 -355 RPM no load speed, 1,350-2,705 BPM load-ed, 13.3 joules impact energy, 20.3 lbs. tool wt., 24 lbs. shipping wt.


6+ MIX OR MATCH $769D25721 (while supply lasts) $719D25723 (while supply lasts) $759

19/16” Spline Rotary Hammer Kit D25553K8.0 joules impact energy provides fast drilling of concrete and powerful chipping. Factory-set clutch reduces sudden, high torque reactions if bit jams. Bit-LOCK feature allows leveraging jammed bits from hole.


Specifications: 12-amps (120V, AC only), 490 RPM no load speed, 3,300 BPM loaded, 8.0 joules impact energy, 14 lbs. tool wt., 23 lbs. shipping wt.



BIG HAMMERS

16 LB SDS Max Chipping Hammer KitD25832K10.5 joules of impact energy. Constant speed con-trol electronics. SHOCKS Active Vibration Control® reduces vibration.

Standard equipment: 360° bail handle, carrying case.

Specifications: 14-amps (120V, AC only), 1,450-2,900 RPM no-load speed, 10.5 joules impact energy, 16.2 lbs. tool wt., 20 lbs. shipping wt.



While supply lasts. Only 378

on hand.

CALL 800-821-5448 OR FAX 800-844-1199

Reciprocating Saw Kit

DW311KKeyless blade clamp and keyless adjustable shoe. Variable speed control dial for added control and orbital action for fast cutting wood applications.

Standard equipment: Metal cutting blade, carry-ing case.

Specifications: 13-amps (120V, AC only), 0-2,700 SPM, 11/8” stroke length, 8 lbs. tool wt., 13 lbs. shipping wt.



Reciprocating Saw DWE305Variable speed. Lever action keyless 4-position blade clamp. Anti-slip comfort grip. No case.

Specifications: 12.0-amps (120V, AC only), 0-2,900 SPM, 11/8” stroke length, 7.0 lbs. tool wt., 7.5 lbs. shipping wt.

SPECIAL PRICE Call

Reciprocating SawDWE304Variable speed. Lever action keyless 4-position blade clamp. No case.

Specifications: 10.0-amps (120V, AC only), 0-2,800 SPM, 11/8” stroke length, 7.0 lbs. tool wt., 7.5 lbs. shipping wt.

SPECIAL PRICE Call

Orbital SawzallNo. 6519-31 Quik-Lok blade system. Counter balance mecha-nism, gear protecting clutch.

Standard equipment: Carrying case.

Specifications: 12-amps (120V, AC only) 0-3,000 SPM, 11/8” stroke length, 7.1 lbs. tool wt., 11.9 lbs. shipping wt.

SPECIAL PRICE Call

Jig Saw KitsDW317K or DW331KBoth saws have 4-position orbital action, 1” stroke length, keyless blade clamp, shoe bevels 0 to 45°. DW331K has detent stops at 0°, 15°, 30° and 45°, integrated dust blower, flush cutting blade system, and includes 3 blades and carrying case. DW317K includes one blade and carrying case.

Specifications: DW317K: 5.5-amps (120V, AC only), 0-3,100 SPM VS, 6.2 lbs. tool wt. DW331K: 6.5-amps (120V, AC only), 500-3,100 SPM VS, 6.4 lbs. tool wt.

DW317K Call DW331K Call

DW317

Reciprocating SawDWE357Compact design at only 14.5” in length. Variable speed. Keyless, 4 position blade clamp. Fixed/pivoting shoe provides leverage for different appli-cations. Includes kit bag.

Specifications: 10-amps (120V, AC only), 0-2,800 SPM, 11/8” stroke length, 6.8 lbs. tool wt., 9.5 lbs. shipping wt.

SPECIAL PRICE Call

Deep Cut Variable SpeedBand Saw, DWM120LED sight light. Blade tracking adjustment increas-es blade life by providing better blade tracking. Multi position front handle.

Standard equipment: hang hook, one 447/8” x 1/2” x .020” blade, hex wrench.

Specifications: 10-amps (120V, AC only) variable speed 100-350 SFPM, cutting capacity is 5” for round or rectangular, 15 lbs. tool wt., 18.5 lbs. shipping wt.

SPECIAL PRICE CallDWM120K (with case) Add $20

Steel Cutting Blades This blade provides the following benefits: 1) faster cutting 2) practically spark free cuts 3) no burr on edges 4) less noise 5) fewer blade changes 6) no dust clouds 7) cool cutting 8) less cost per cut.

Use on 71/4” circular saw with 5/8” or diamond knockout. Max RPM is 5,800 RPM.

P/N CUTTING APPLICATION 1-4 5+

71/4SP38 1/8” to 1/4” $49 $4571/4SP48 24 Ga. to 1/8” 49 4571/4SP70 29 Ga. to 26 Ga. 64 58See page 44 for more blades.

71/4” Worm DriveCircular SawDWS535B53° bevel capacity. Bevel stops at 22.5° and 45°. Electric brake.

Standard equipment: 24T carbide blade, blade wrench, and saw hook.

Specifications: 15-amps (120V, AC only), 4,800 RPM no-load speed, 5/8” or diamond arbor, 13.8 lbs. tool wt., 18.1 lbs. shipping wt.

SPECIAL PRICE Call

71/4” Circular Saw DWE575SB

Lightweight 8.8 lbs. Electric brake. 57° bevel capacity, with stops at 45° and 22.5°. 29/16” depth of cut capacity at 90°. Integrated dust blower. No rear pivot.

Standard equipment: 18-tooth carbide blade, blade wrench, carrying bag.

Specifications: 15-amps (120V, AC only), 5,200 RPM no-load, max output 1,950 watts, 5/8” arbor, 8.8 lbs. tool wt., 12.4 lbs. shipping wt.

SPECIAL PRICE Call

71/4” Circular SawDWE575

Lightweight 8.8 lbs. 57° bevel capacity, with stops at 45° and 22.5°. 29/16” depth of cut capacity at 90°. Integrated dust blower. No electric brake or rear pivot.

Standard equipment: 18-tooth carbide blade, blade wrench.

Specifications: 15-amps (120V, AC only), 5,200 RPM no-load, max output 1,950 watts, 5/8” arbor, 8.8 lbs. tool wt., 12.4 lbs. shipping wt.

SPECIAL PRICE Call

SAWS

20V MAX* 71/4” Circular SawDCS570P157° bevel capacity. Two bevel stops. Brushless motor. Electric brake.

Standard equipment: One 20V MAX* 5.0 A-H battery (DCB205), charger (DCB101), blade, car-rying case.

Specifications: 0-5,500 RPM no-load speed, max output 900 watts, 5/8” arbor, 29/16” max cut at 90°, 9.0 lbs. tool wt., 12.4 lbs. shipping wt.

SPECIAL PRICE Call


1-2 3+PART # SIZE x ARBOR x TEETH PRICE PRICE14076 10” X 5/8” X 80 $84.40/e $75.95/e14082 12” X 1” X 72 92.85/e 80.75/e

1-2 3+ PART # SIZE/TEETH PRICE PRICE 24233 10”/24T $37.65/e $32.40/e24070 10”/40T 41.65/e 36.25/e

SAWING IS BELIEVING. We can prove that Lenox portable bandsaw blades are the best and so can you. Try a pack of five – if you are not completely satisfied with the blades superior performance then the pack will be free!

Bi-Metal. Electronic weld. 447/8”. 6 tooth configurations to choose from: 14, 18 and 24 or 10/14, 14/18 and 20/24 variable pitch. Note: The 20/24 is M.K. Morse not Lenox.

100+DESCRIPTION PRICE PRICE

447/8” Blade. Any tooth configuration, 5 per pack $6.95/e $6.40/eSame as above, but bulk, 25 per box $6.60/e $6.05/e

MITER SAW BLADEMARATHON® miter saw blades have a thin kerf and construction micrograin carbide teeth. The fully hardened plate is balanced and precision tensioned for an accurate cut. Alternate top bevel ground teeth ensure an easy cross-cut, trim or cutoff.

Thin kerf carbide teeth on a balanced, hardened plate cut accurately. 5/8” arbor.

MARATHON® circular saw blades feature a thin kerf with rein-forced shoulder for faster cuts. The plate is fully hardened with heat reducing vents for added durability. (BQ)

# 1-24 25+PART # SIZE TEETH PRICE PRICE

24028 71/4” 18 $14.65 $13.2024030 71/4” 24 6.40 5.75*24031 71/4” 40 30.15 27.1514050 81/4” 24 26.55 23.9014053 81/4” 40 40.55 36.50

LEADER OF THE PACK®

BAND SAW BLADES

*WHILESUPPLYLASTS

61/2” and 71/4” saw blades for wood, steel and non-ferrous applications. All feature the finest car-bide tips for the application specified.

CARBIDE CIRCULAR

SAWBLADES

NO MIX BLADE # FOR 1-4 5+PART # SIZE TEETH CUTTING ARBOR PRICE PRICEDW9154 61/2” 24 Wood 5/8” $19.75 $17.95DW9152 61/2” 36 Aluminum 5/8” 26.90 24.75TU61/248 61/2” 48 Steel 18ga.-3/16” 5/8” 47.00 43.00TU61/260A 61/2” 60 Aluminum 5/8” 49.00 45.0025130 71/4” 24 Wood Universal 5.50 4.9525230 71/4” 40 Wood Universal 11.25 10.15

TABLE SAW BLADES

SAW BLADES; CIRCULAR & PORTABLE BAND SAW

CALL 800-821-5448 OR FAX 800-844-1199

16 Gauge Nibbler DW896

Rotating head allows changing cutting directions as desired. Round punch allows 360° privot while cutting. Easy to change punch and die.

Specifications: 3-amps (120V, AC/DC), out watts 385, 2100 SPM no-load speed, 41/2 lbs. tool wt., 51/4 lbs. shipping wt.



16 Gauge NibblerNo. 6890

AC/DC paddle switch. Cutter can be set in 8-positions.

Specifications: 3.8-amps (120V, AC/DC), 1,900 SPM, 13/4” smallest cutting radius, cutting capacity: 16 ga. steel, 18 ga. stainless, 4.8 lbs. tool wt., 6.2 lbs. shipping wt.



18V 16 Gauge NibblerNo. CN18DSLQ4M

This cordless tool uses the same punch & die as our popular CN16SA - pict left. Tool includes one FREE battery but no charger. See bottom of this box to order charger.

Standard equipment: FREE one 18V 3.0 A-H bat-tery (339782), wrench.

Specifications: 18V, 2,500 SPM, min cutting ra-dius 19/16”, 5.5 ft./min cutting speed in 18 ga. cold rolled steel, 4.6 lbs. tool wt. with battery.


#339782 18V 3.0 A-H BATTERY $37UC18YSL3 CHARGER $46

030 PUNCH $13.85 039 DIE $33.50

16 Gauge NibblerNo. CN16SAM Three position indexing die holder for quick and easy direction changes. Most suitable for cutting corrugated and trapezoidal sheets.

Standard equipment: Wrench.

Specifications: 3.5-amps (120V, AC only), 2,300 SPM no-load, minimum cutting radius 137/64”, 5.2 ft./min. cutting speed in 18 ga. cold rolled steel, 3.5 lbs. tool wt.


16 Gauge Nibbler No. JN1601Standard equipment: Two wrenches.

Specifications: 5-amps (120V, AC only), 2,200 SPM no-load, smallest cutting radius 2”, capacities: 16 ga. mild steel, 10 ga. aluminum, 18 ga. stain-less, 3.6 lbs. tool wt., 4.9 lbs. shipping wt.


18 Gauge Nibbler No. ABLK18 1.3CSE

Cut flat, corrugated or trapezoidal sheet metal. Rotating punch for longer life. Cutting direction can be changed in 45° increments up to 360°.

Standard equipment: Case, rapid charger, 2 Li-ion batteries, .000 punch and .009 die.

Specifications: 18V 5-amp hour battery, vari-able speed, 7.5 ft/min. cutting speed, cutting width 3/16”, radius of smallest curve (inside/outside) 9/16” / 13/16”, 3.5 lbs. tool wt. without battery.


18 Gauge Nibbler, No. BLK 1.3CSThe fastest, most maneuverable and well balanced nibbler in the industry. It replaces the ever-popular Fein RSS 636-2. The BLK 1.3CS is the finest nibbler available to cut flat or corrugated sheet metal up to 18 gauge thick. Cutting speed is a snappy 7.5 ft/minute. Rotating punch system increases punch life by 30%. Eight die locations allow cutting direction to be adjusted in 45° increments without tools. No tools needed to change punch or die. No set screw on die, instead unscrew by hand the collar around the die.

Specifications: 2.8-amps (120V, AC only), 0-1,800 VS SPM, input watts is 350 watts, smallest radius 3/4”, plunge diameter start hole 3/4”, cutting capacity: 18 ga. mild steel, 28 ga. S/S, 14 ga. alum., 3/32” plastics, 3.85 lbs. tool wt.


PIC. MFG. FITS DESCRIP. PART # PRICE

MK1 Makita 1600 Punch 005 $59.50MK2 Makita 1601 Die 051 31.00MK2 Makita 1601 Punch 067 49.40MK4 Makita 1601 Die Holder 701 139.00ME Milw. 6890 Die 0270 65.50ME Milw. 6890 Punch 0260 23.20TF Trumpf N160E Die 20 Ga. & Thinner 611 Disc.TF Trumpf N160E Die 16-20 Gauge 714 38.50TF Trumpf N160E Punch 676 19.95TF4 Trumpf N160E Die Holder 715 165.00

PIC. MFG. FITS DESCRIP. PART # PRICE

BH3 Bosch 1530 4 Position Fixed Die 904 $77.80BH3 Bosch 1530 Punch 013 22.60FN1 Fein 636-2 Die A9-11 106.00FN1 Fein 636-2 Punch Z40-1 16.90FN2 Fein 1.3CS Die 009 99.95FN2 Fein 1.3CS Punch 000 16.90HP Hitachi CN16 Die 039 33.50HP Hitachi CN16 Punch 030 13.85HP4 Hitachi CN16 Die Holder (not pict) 038 135.00MK1 Makita 1600 Die 004 126.00

PIC. MFG. FITS DESCRIPTION PART # PRICE

DW DeWalt 896 Punch & Die Set 826 $79.95BH1 Bosch 1529 360° Swivel Die 021 Disc.BH1 Bosch 1529 4 Position Fixed Die 903 Disc.BH1 Bosch 1529 Punch 022 24.40 BH2 Bosch 1529B Die 20 Ga. & Thinner 035 Disc.BH2 Bosch 1529B Die 18-20 Gauge 028 38.50 BH2 Bosch 1529B Punch 027 19.95 BH4 Bosch 1529B Die Holder (only) 715 165.00

DW

BH1

BH2

BH3

DISCONTINUED

HP

FN1

FN2

MK1ME

TF

MK2Die HoldersBH4/

TF4

MK4

DISCONTINUED

DISCONTINUED

NIBBLERS


16 Gauge10.8V ShearNo. C-160 Battery

Standard equipment: Two 10.8V batteries, 30 minute charger, straight cutter, pair of reversible fixed cutters, allen key.Specifications: Nominal load stroke rate 3,800 SPM, 19 to 30 FT/min. 3.1 lbs. tool wt.


Cutting possible both towards the right and left. For non-thru cuts, order this tool with the integrated chip clipper to cut off the chip clean and flush to the surface of the material, order as a “Plus” and add $70 to the price below. Four center blades are available. 1) #143463 is standard equip.–has 31/2” min. cutting radius for .040” to .063” thick steel. 2) #143434 is an optional center blade that allows 11/8” min. cutting radius up to .040” thick steel. 3) #934055 is an optional center blade that cuts spiral duct up to .100” thick or .048” stainless with a 61/2” min. cutting radius. 4) 143432 is an optional center blade that makes straight cuts up to .040” thick.

16 Gauge ShearNo. C-160 Electric

Standard equipment: 1 straight cutter, 1 pair of reversible fixed cutters, allen key.Specifications: 3.5-amps (120V, AC only), nom-inal load stroke rate 3,800 SPM,19 to 30 FT/min. 3.1 lbs. tool wt.


SHOWN WITH “PLUS” FEATURE

18 Gauge Shear No. 6852-20Cut straight or contour lines in up to 18 ga. flat metal. NOT for use on corrugated metal.

Specifications: 6.8-amps (120V, AC only), 0-2,500 SPM, 4.1 lbs. tool wt., 5.12 lbs. shipping wt.

SPECIAL PRICE Call REPLACEMENT BLADE SET CONTAINS ALLTHREE BLADES AND A SPACER BUSHING

1-5 $53.95 6+ $49.70

16 Gauge ShearNo. CE16SAMCuts 26.7’ of 16 gauge mild steel per minute. Easily replaced blades have eight cutting edges.

Standard equipment: Stationary blade (001), moving blade (000), wrench, thickness gauge.

Specifications: 3.7-amps (120V, AC only), 4,200 SPM, 1” minimum cutting radius, 4.0 lbs. tool wt.

REGULAR PRICE $479SPECIAL PRICE $299EXTRA MOVING BLADE (000) $9 and

FIXED BLADE (001) $9

Scissor ShearsNo. KD-480Large “Rabbit Ear” blades funnel thick, soft mate-rials into the scissor’s jaws for a clean, flowing cut, variable speed.

Ideal for cutting pliables such as; vinyl, woven woods, chipboard, foam rubber and linoleum.

Bottom blade is stationary.

Specifications: 5-amps (120V, AC only), 0-2,500 max. RPM, 4.2 lbs. tool wt, 4.7 lbs. ship-ping wt.


Replacement BladesKeep your Kett shears operating as effi-ciently as possible by replacing worn blades with their original equipment manufacturers replacement blades. Our most popular shear, the KD-400, requires the #102 Kit. The #102 Kit contains 3 blades (right, left and center) and a spacer bushing. Kett’s #106 Kit is for heavier gauge cutting (up to 14 gauge) and contains 3 blades but no bushing.

PART 1-5 6+ # FITS TOOLS PRICE ANY MIX

102 KETT KD-200, KD-400, DW890, $53.95 $49.70 DW940, DW941, B&D 3207, MILW 6850, 6852, P.C. 7602, MAK BJS130

106 KETT KD-442, KD-440, KD-242, 58.85 53.65 K242, K442, KE440, E140, DW891, B&D 3208

102

14 GaugePower ShearsNo. KD-440Cuts at over 150” per minute.

Specifications: 5-amps (120V, AC only), 0-2,500 SPM, 51/2” minimum cutting radius, cutting capac-ities: 14 gauge mild steel and 16 gauge stainless, 5.1 lbs. tool wt, 5.75 lbs. shipping wt.

No. 106 Blade Kit....................$58.85 or 6+ $53.65


6+ MIX OR MATCH $228.80Plus Case (KTK340) Add $25

16 Gauge ShearNo. KD-442Specifications: 5-amps (120V, AC only), 0-2,500 SPM, cuts at 150” per minute, cutting capacities: 16 gauge mild steel and 18 gauge stainless, 4.45 lbs. tool wt, 5.0 lbs. shipping wt.

Replacement Blade Kit #106 .. $58.85 or 6+ $53.65



18 Gauge ShearNo. KD-400Cut straight or contour lines at 180” per minute. NOT for use on corrugated materials.

Standard equipment: 5-amps (120V, AC only), 0-2,500 SPM, 51/2” minimum cutting radius, cutting capacities: 18 ga. mild steel, 20 ga. stainless and 3/32” in plastic or formica, 4.15 lbs. tool wt, 4.65 lbs. shipping wt.

No. 102 Blade Kit...................$53.95 or 6+ $49.70Kett No. 1020 Nibbler Attachment $176.00



AND SHEARS

20V MAX*18 Gauge SwivelHead ShearDCS491M2Head swivels 360° for cutting convenience. Cuts 7/32” strip which continuously curl out of cutting area. Minimum cutting radius 41/2”.

Standard equipment: Two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB115), hex wrench, carrying bag.

Specifications: 0-2,450 SPM. Capacity: 18 ga. mild steel, 20 ga. stainless, 41/2” minimum radius. 4.6 lbs. tool wt., 10.3 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*14 Gauge SwivelHead ShearDCS494M2Head swivels 360° for cutting convenience. Cuts 7/32” strip which continuously curl out of cutting area. Minimum cutting radius 5”.

Standard equipment: Two 20V MAX* 4.0 A-H bat-teries (DCB204), charger (DCB115), hex wrench, carrying bag.

Specifications: 0-2,450 SPM. Capacity: 14 ga. mild steel, 16 ga. stainless, 5” minimum radius. 4.6 lbs.tool wt., 10.3 lbs. shipping wt.

SPECIAL PRICE Call

CALL 800-821-5448 OR FAX 800-844-1199

SLUGGER CUTTERS WITH PINS ANY MIX ANY MIX ANY MIXDIMENSIONS 1-4 5-9 10-24 25+

9/16 x 1” $38.05 $36.15 $34.25 $32.509/16 x 2” 49.95 47.50 46.05 42.8011/16 x 1” 41.30 39.15 37.05 35.3011/16 x 2” 59.80 56.75 53.80 51.1013/16 x 1” 46.75 44.40 42.05 39.9513/16 x 2” 69.55 66.10 62.50 59.456437 6pc set (7/16” - 11/16” 1” cutters) 173.00 – – –6500 6pc set (1/2” - 1” 2” cutters) 236.00 – – –

MAG PRESS TOOLMODEL # P/N DIA. DEPTH WT. PRICE

Holemaker II 561120 13/8” 2” 30 $ 799USA 101 261120 11/2” 2” 32 999Magforce 361120 15/8” 2” 29 1,219USA202 961090 2” 3” 31 1,349Magbrush Wand lifts up to 2 lbs. of steelchips to keep working area clean. 24.50

• Holemaker II has a capacity of 13/8” x 2”, accepts an accessory 3-jaw chuck for twist bits under 1/2”, uses a simple post guide system and features a “Mag Bot” fluid bottle that feeds fluid in any position. It has reversible feed handles with a hex mount for use with a socket wrench and internal motor cord for durability.• USA101 has a capacity of 11/2” x 2”, accepts an accessory 3-jaw chuck for twist bits under 1/2”, durable dovetail slide design and features a “Mag Bot” fluid bot-tle that feeds fluid in any position. It has reversible feed handles with a hex mount for use with a socket wrench and internal motor cord for durability.• Magforce is a powerful compact magnetic drill with a capacity of 15/8” x 2”. Its 12” height and 29 lb. weight make it highly maneuverable in tight spaces. The cartridge motor design reduces moving parts that can break with rough treatment. It has reversible feed handles with a hex mount for use with a socket wrench and internal motor cord for durability.• USA202 is a powerful 2-speed drill with MK3 tool mounting for core and twist drilling. Drill 2” holes to 2” depth (3” with optional arbor not included) using an integrated cooling tank. Side-reversible handwheel with hexagonal hub. Higher RPM for use with carbide cutters.

USA202MAGFORCEUSA101HOLEMAKER II

SLUGGER CUTTERS & MAG PRESSES

CORDLESS

High torque brushless motor with electronic speed setting. Features include: tilt sensor, MT2 tool mounting, tool-free cutter change and extra narrow permanent magnet.

Standard equipment: Charger, two 5.2 A-H batteries, case.

Specifications: 130-520 RPM full-load speed, 11/16” twist or 13/8” annular cutter capacity, 51/4” stroke, 28 lbs. tool wt. P/N 261090


Mag Drill AJMU137

2” 2-SpeedMagneticDrill PressDWE1622K

10-amp motor with overload protection. Quick Change Chuck system allows tool free change between 3/4” Weldon Shank and 1/2” keyed chuck. Handle and coolant bottle can be placed on either side of tool.

Standard equipment: Magnetic coolant tank, 1/2” keyed chuck, safe-ty chain, adjustment tools, kit box.

Specifications: 10-amp motor (120V, AC only), 300 or 450 RPM no-load speed, 1/2” twist bit or 2” annular cutter capacity, 43/8” length of travel, 33 lbs. tool wt.


6” Sandwich Panel CutterNo. TPC 165

Makes up to 61/2” thick cuts thru sandwich panels. Snappy 9.8 ft/min cutting speed. Safe, clean and quick. Can cut up to two 20 gauge panels sandwiching 6” of rigid insulation.

Standard equipment: Combination key, oil, carrying case.

Specifications: 120V AC only, 9.8 ft/min cutting speed, 1,400 watts, minimum sized opening of a plunged cut-out is 13.5”x13.5”, 21.2 lbs tool wt., 25 lbs. shipping wt.

SPECIAL PRICE $3,595Extra Chains (#983) $375

Trumpf Chain Oil (#387) 17oz $34Replacement Bar that Supports Chain (#537) $256

Guide Rail (#777) $392

& SLUGGER METAL WORKING TOOLS


Large Angle Grinders 7” 8,500 RPM, DWE4597/(N)9” 6,500 RPM, DWE4599N3,650 max watts motor. Dust Ejection System™. Spindle lock. Trigger switch. E-Clutch®. Overload protection. Tools ending with “N” do not have lock-on switch.

Standard equipment: 3-position anti-vibration side handle and a Quick-Change™ Guard.

Specifications: 15-amp (120V, AC only), no-load speeds listed above, 5/8-11 spindle. Tool wts.: DWE4597N 12.3 lbs., DWE4599N 12.8 lbs.



DWE4597N

Large Angle Grinders 9” 6,500 RPM, DWE4559N

7” 8,500 RPM, DWE45577”-9” 6,000 RPM, D28499XDust Ejection System™. Spindle lock. Trigger switch. DWE4559N does not have trigger lock-on.

Standard equipment: DWE4559N and DWE4557 have 3-position side handle and a Quick-Change™ Guard. D28499X has 5-position side handle, 7” and 9” guards.

Specifications: 15-amps (120V, AC/DC), no-load speeds listed above, 5/8-11 spindle. Tool wts.: DWE4559N and DWE4557 12 lbs., D28499X 14.5 lbs.



DWE4559N

7” Angle GrinderDWE4517/DW840KFREE Ten 1/4” thick Type-27 Grinder Wheels (not Hubs - extra $1 for Hubs) or .045 Slicer Wheels, either Type-1 or Type-27.

DWE4517: 15-amps (120V, AC/DC) motor, 4 HP with overload protection. 8,500 RPM no-load speed. Automatic shutdown when brushes need to be changed. 5/8”-11 spindle. Spindle lock. Trigger lock-on or off. Includes side handle and 7” guard. 12.1 lbs. tool wt.

DW840K: 13-amps (120V, AC/DC) motor, 3 HP. 8,000 RPM no-load speed. 5/8-11 spindle. Spindle lock. Includes side handle, 7” guard, wheel, back-ing flange, wrench, kit box.

DWE4517 DW840K

SPECIAL PRICE $169 $1296+ MIX OR MATCH 159 119

DWE4517

Angle Grindersw/Kickback Brake

1,800 watt motor. E-Clutch®/Overload Protection. Kickback brake. No lock-on switch.

Standard equipment: Side handle, hex key, Type-27 guard, flanges.

Specifications: 13-amps (120V, AC/DC except DWE43265N, AC only); 5/8-11 spindle, approx. 6 lbs. tool wt.

Wheel RPM No- Special 6+Tool Diameter Switch Load Speed Price Price

DWE43214N 5” Paddle 10,500 Call CallDWE43265N 5”/6” Trigger 9,000 Call Call(rat tail)DWE43244N 5”/6” Paddle 9,000 Call CallDWE43840CN 7” Trigger 8,000 Call Call(rat tail)

DWE4517

6” Cut-Off GrinderDWE43140/DWE46103 - Slide Switch DWE43144/(N) - Paddle Switch1,700 max watt motor. E-Clutch®/Dual Clutch Protection™. Dust Ejection System™.

Standard equipment: Side handle, quick change wheel release, Type-27 and Type-1 keyless adjust-able guard.

Specifications: 13-amps (120V, AC only), 9,000 RPM no-load speed, 5/8-11 spindle.

DWE43140 Tool only-lock-on $175DWE46103 Tool w/Dust Shroud 239DWE46100 Dust Shroud only 119DWE43144 Tool only-lock-on 177 DWE43144N No lock-on switch 175DWE46114N No lock-on switch 195DWE46166N No lock-on switch 229D28144 While supply lasts 139

DWE43144N

Angle GrinderDWE43116 41/2”-6”DWE43066/(N) 6”FREE five 1/4” thick Type-27 Grinder Wheels or .045 Slicer Wheels, either Type-1 or Type-27. 1,700 watt motor. Trigger grip. Dust Ejection System™. DWE43066 has E-Clutch®. Order without lock-on (DWE43066N).

Standard equipment: Two-position side handle, DWE43166 has 41/2”, 5” & 6” Type-27 guards; DWE43066 has 5” and 6” Type-27 guards and 6” Type-1 guard.

Specifications: 13-amps (120V, AC only); 9,000 RPM no-load speed, 5/8-11 spindle, 5.7 lbs. tool wt., 8.0 lbs. shipping wt.

DWE43116 DWE43066/(N)

SPECIAL PRICE $131 $1786+ MIX OR MATCH 124 167

DWE43066DWE43115

41/2”-5” Angle GrinderDWE43115/DWE43115NFREE five 1/4” thick Type-27 Grinder Wheels or .045 Slicer Wheels, either Type-1 or Type-27. 1,700 watt motor. E-Clutch® for durability. Dust Ejection System™. Trigger grip. Order with (DWE43115) or without lock-on (DWE43115N).

Standard equipment: Two-position side handle, 5” Type-27 guard.




41/2”-5” Angle GrinderDWE43131/DWE43114/(N)1,700 max watt motor. E-Clutch® for durability. Quick-Change™ Wheel Release. Dust Ejection System™. Order slide switch (DWE43131) or pad-dle switch with lock on (DWE43114) or no-lock on paddle switch (DWE43114N).

Standard equipment: Two-position side handle, 5” tool free adjustable guard, wrench.




DWE43131

41/2” Angle GrinderDWE402/DWE402NDWE4222*FREE five 1/4” thick Type-27 Grinder Wheels or .045 Slicer Wheels, either Type-1 or Type-27. 1,400 watt motor. Dust Ejection System™. Paddle switch. DWE4222 has electronic switch, clutch, soft-start and electric brake. Tools ending with “N” do not have lock-on switch.

Standard equipment: Side handle, One-Touch™ adjustable guard, wrench.

Specifications: 11-amps (120V, AC/DC); 11,000 RPM no-load speed; 5/8-11 spindle, 4.6 lbs. tool wt., 6.2 lbs. shipping wt.

DWE402/N DWE4222*

SPECIAL PRICE $74.30 $109.156+ MIX OR MATCH 69.85 102.60

*While supplies last

DWE402

41/2” Angle GrinderDWE4214/DWE46153

1,400 watt motor. Lock-on sl ide switch. OneTouch™ Guard. Quick-Change™ Wheel Release. Dust Eject ion System™. Order DWE46153 and receive grinder, universal con-nector, dust shroud, diamond turbo wheel, and bail handle.

Standard equipment: Two-position side handle, keyless adjustable guard, wrench.

Specifications: 11.0-amps (120V, AC/DC), 11,000 RPM no-load speed, 5/8-11 spindle, 4.6 lbs. tool wt., 6.5 lbs. shipping wt.

DWE4214 DWE46153

SPECIAL PRICE $95 Call6+ MIX OR MATCH $89 Call

DWE46152 Surface Dust Shroud Call

DWE4214DWE4120

41/2” Angle GrinderDWE4120/DWE4120N

FREE five 1/4” thick Type-27 Grinder Wheels or .045 Slicer Wheels, either Type-1 or Type-27. 1,140 max watt motor. One-Touch™ Guard for easy positioning. Quick-Change™ Wheel Release. Order tool with paddle switch lock-on (DWE4120) or without lock on (DWE4120N).

Standard equipment: Two-position side handle, hex wrench.

Specifications: 9-amps (120V, AC/DC); 12,000 RPM no-load speed; 5/8-11 spindle, 3.9 lbs. tool wt., 6.5 lbs. shipping wt.

DWE4120 DWE4120N

SPECIAL PRICE $69 $79

DWE4011

41/2” Angle GrinderDWE4011/DWE4012850 max watt motor. DWE4011 has slide switch. DWE4012 has paddle switch with lock-on.

Standard equipment: Two-position side handle, depressed center wheel, One-Touch™ guard, hex wrench.

Specifications: 7-amps (DWE4011) 7.5-amps (DWE4012), (120V, AC/DC), 12,000 RPM no-load speed, 5/8-11 spindle, 3.9 lbs. tool wt., 6.5 lbs. shipping wt.

DWE4011 DWE4012

SPECIAL PRICE Call Call

ANGLE GRINDERS

CALL 800-821-5448 OR FAX 800-844-1199

Area LightDC527 18VDCL050 20V MAX*Built-in Telescoping and 360° rotating hook allows units to hang from 2” materials. DC527 runs on 18V battery and has a 13 watt fluorescent bulb. DCL050 runs on 20V MAX* battery; has 3 bright LED bulbs with two brightness settings–250 and 500 lumens. Batteries not included. DC527 DCL050SPECIAL PRICE $19* $62

*While supply lasts

DCL050

18V/20V MAX* LED WorkLightDCL061Bright LED output -1500 Lumens. Adjustable head to direct light where needed. AC outlet providing jobsite power versatility. Compatible with 18V and 20V MAX* batteries. 3.75 lbs. tool wt.

SPECIAL PRICE $129DCL060 (no AC outlet) $95

DCL061

WorkSite Radio DCR018Jobsite BluetoothSpeaker DCR006Radio able to be powered by 18V NiCad/Li-Ion, 12V MAX*, 20V MAX* or AC power cord. USB power port allows device to be charged via USB when radio is plugged into AC wall outlet. 3.5mm auxiliary input allows for connection to CD, MP3, portable satellite receivers and other digital audio devices. This is not a charger.

Bluetooth Speaker runs off 12V/20V MAX* batteries or AC/DC power. Bluetooth 4.0 up to 100’ range.

Batteries and chargers sold separately.

DCR018 DCR006SPECIAL PRICE Call Call

DCR018

DCR006

WorkSite Radio ChargersDCR015 – 12V MAX*/20V MAX*DC012 – 7.2V-18VAuxiliary and USB ports allows for connection to CD, MP3, Portable Satellite Receivers, and other digital audio devices. Runs off AC power or DeWalt battery. DCR015 charges 12V MAX* or 20V MAX* batteries and includes auxiliary and USB ports, and two AC outlets. Weight 13 lbs. DC012 charges 7.2V to 18V batteries except Univolt®, includes auxiliary port, and three AC out-lets. Weight 14.3 lbs. Batteries sold separately.

DCR015 Call* DC012 $159**While supply lasts

DCR015

Bluetooth Charger RadioDCR025 – 20V MAX*/60V MAX*

Powered by 20V MAX, 60V MAX Flexvolt, or AC power cord. Charges 20V and 60V batteries when plugged into an AC outlet. Bluetooth connectivity up to 100’. Includes auxiliary and 2.1-amp USB charging ports and two additional AC power out-lets. Audio Visual Remote Control Protocol allows you to control device from the radio interface. Weight 16 lbs. Batteries sold separately.

SPECIAL PRICE Call

20V MAX*Corded/CordlessBluetooth LEDArea Light w/ChargerDCL070T1

LED area light powered by 20V MAX* or AC power cord. Instant on/off with no warmup. 3,000 max lumens with battery, 7,000 max lumens on AC. Dimming option to 500 lumens. Built in 20V/60V MAX* battery charger when plugged into AC power. AC outlets allow daisy chain multiple lights or power a corded tool. Control with smartphone or tablet, or program to turn on/off automatically at scheduled times. Includes one 6.0 A-H (DCB206) battery. 27 lbs. tool wt.

SPECIAL PRICE $489Tool only (DCL070) $375

20V MAX*LEDWork Light DCL074LED 5,000 lumens of natural white light. Up to 11 hours of battery life. Works with all DeWalt 20V MAX* and FLEXVOLT® batteries. Set up with freestanding, tripod-mounted (sold separately) or hanging hook. Impact resistant body and lens. Tool Connect app can control and monitor light remote-ly. Battery and charger sold separately. Tool height 12”, length 11”, wt. 8.6 lbs.

SPECIAL PRICE Call

20V MAX*LEDFlashlight DCL040Spotlight DCL043Worklight DCL044DCL043 has three bright LED bulbs and one red LED bulb to preserve night vision. Can be seen up to 508 yards. DCL044 has kickstand, belthook, hanging hook and magnet. Battery and charger sold separately.

Flashlight Spotlight Worklight DCL040 DCL043 DCL044Brightness (lumens) 110 90 or 1,000 160Pivoting Head 120° 90° 360°SPECIAL PRICE Call $87 $55

DCL044

12V MAX* 3/8”AdjustableClutch DrillDCD710S2

Single sleeve keyless ratcheting chuck with 15 settings. LED light.

Standard equipment: Two 12V MAX* Li-ion 1.3 A-H batteries (DCB120), 40 minute MAX* charger (DCB100), belt hook, carrying bag.

Specifications: 0-400 or 1,500 RPM no-load speed VSR, 189 max watts out, 2.4 lbs. tool wt., 5.0 lbs. shipping wt.



20V MAX* Tripod LightDCL079B

FREE 20V 4.0 A-H battery (DCB204) - $89 value if you order DCL079B. Cordless Tripod Light uses natural white LED technology. Three brightness settings from 1,001 to 3,000 lumens. Rotating, pivoting head. Telescoping pole extends light head to 7’. Up to 11 hour runtime. Carry handle provides easy portability. 16 lbs. tool wt.

To order a kit which includes the tripod light, one 20V MAX* 6.0 A-H battery (DCB206) and charger (DCB115), order DCL079R1.

DCL079B DCL079R1SPECIAL PRICE Call Call

20V MAX*Corded/CordlessJobsite FanDCE511B

Corded or cordless operation. Variable speed. 500 CFM. Freestanding, hang hooks or wall mount. Up to 7 hour run-time at max speed with 4.0 A-H 20V MAX* battery (battery sold seperately). Tool height 17”, length 12”, depth 8”, weight 6.7 lbs.

SPECIAL PRICE Call

LIGHTS, RADIOS & MORE

120V/20V MAX* USBPower SourceDCB090USB Power Source can charge up to two small USB compatible electronic devices off your 12V or 20V MAX* battery when AC power is not available. Lights indicate when unit is powered on and ready to charge devices. Lights also indicate the power remaining in the connected battery pack. Photo above includes battery which must be purchased separately.

SPECIAL PRICE CallWhile supplies last

CLOSEOUTBLOWOUT


20V MAX* Battery Adapter for 18V ToolsDCA1820Adapter allows 20V MAX* batteries to be used on most 18V stem top tools. 20V MAX* char-ger required to charge 20V MAX* batteries. Batteries and chargers sold separately. To order a kit that includes the adapter, two 20V MAX* 2.0 A-H batteries (DCB203), and 20V MAX* charger (DCB115), order DCA2203C.

DCA1820 DCA2203CSPECIAL PRICE $39 Call

DCA1820

DCA2203C

1800 Watt PortablePower Station/ParallelBattery ChargerDCB1800M3T1Allows for AC power in remote locations for portable power. Provides 1800 watts (15-amps) continuous power to run most corded tools. Runs on four 20V MAX* batteries (3.0 A-H or higher for best results). Includes three 20V MAX* 4.0 A-H (DCB204) batteries and one 20V/60V MAX* 6.0A-H (DCB606) Flexvolt battery. Also is a multi-port charger for up to four 20V MAX* batteries when plugged into wall outlet. 18 lbs. tool wt., 29lbs. shipping wt.

SPECIAL PRICE $665DCB1800B (no batteries) Call

20V MAX*Cut-OutToolDCS551D2Tool-free bit change. Fast cutting in drywall, acous-tical ceiling tiles, plywood, etc. LED light.

Standard equipment: two 20V MAX* 2.0 A-H batteries (DCB203), fast charger, 1/4” and 1/8” collet diameter, belt hook, carrying bag.

Specifications: 26,000 RPM no-load speed, 3.1 lbs. tool wt.

SPECIAL PRICE Call

20V MAX* Adhesive DispenserDCE560D1 10oz/300mlDCE580D1 300-600mlVariable speed trigger and dial for increased con-trol over flow. Anti-Drip feature. LED light.

Standard equipment: One 20V MAX* 2.0 A-H battery (DCB203), charger (DCB112). Hang hook.

Specifications: Max speed 21” per minute. DCE560 fits 10 oz. and 300 ml cartridges, 4.0 lbs. tool wt. DCE580 fits 300-600 ml sausage cartridges, 4.9 lbs. tool wt.


DCE560D1

20V MAX* Threaded Rod CutterDCS350D1Able to cut 1/4”, 3/8”, and 1/2” mild steel and 1/4” and 3/8” stainless steel core threaded rod. Clean bur free cuts for easy threading. Rotating cutter allows cutting of multiple sizes of rod with one cutter. LED light. Tool wt. 9.6 lbs., shipping wt. 12.5 lbs.

Standard equipment: One 20V MAX* 2.0 A-H battery (DCB203), charger (DCB112), two 4-sided cutting dies, cutting die adjustment wrench, car-rying bag.

SPECIAL PRICE Call

20V MAX* Concrete NailerDCN890P2Brushless motor. Variable power settings for pin depth adjustment and substrate versatility. Comparable application speed to gas concrete nailers. LED lights. Up to 600 shots per charge.

Standard equipment: Two 20V MAX* 5.0 A-H battery (DCB205), charger (DCB115), standard/drywall contact trip, kitbox.

Specifications: Magazine capacity 33, compatible with DeWalt concrete nailer pins (1/2”-21/4”), 9.3 lbs. tool wt., 20 lbs. shipping wt.


20V MAX* NailersDCN692M1 – FramingDCN660D1 – FinishDCN692M1 Framing Nailer has brushless motor. Dual speed for different nail lengths. Sequential or bump mode. Accepts 30-34° paper tape, clipped head and offset full round head nails. 2”-31/2” nail length, 55 nail magazine. Includes 20V MAX* 4.0 A-H battery (DCB204), charger (DCB115), no-mar tip, belt hook, 9.1 lbs. tool wt.

DCN660D1 Finish Nailer drives 16 ga 20 degree 11/4”-21/2” finish nails. Sequential or bump mode. 110 nail magazine. Includes 20V MAX* 2.0 A-H battery (DCB203), charger (DCB112), case, 5.2 lbs. tool wt.

DCN692M1 Call DCN660D1 Call

DCN692M1

DCN660D1

20V MAX*14 Gauge SwivelHead ShearDCS494M2Head swivels 360° for cutting convenience. Cuts 7/32” strip which continuously curl out of cutting area. Minimum cutting radius 5”.


Specifications: 0-2,450 SPM. Capacity: 14 ga. mild steel, 16 ga. stainless, 5” minimum radius. 4.6 lbs.tool wt., 10.3 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*18 Gauge SwivelHead ShearDCS491M2Head swivels 360° for cutting convenience. Cuts 7/32” strip which continuously curl out of cutting area. Minimum cutting radius 41/2”.


Specifications: 0-2,450 SPM. Capacity: 18 ga. mild steel, 20 ga. stainless, 41/2” minimum radius. 4.6 lbs. tool wt., 10.3 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* DrywallScrewgunDCF620D2 – 2.0 A-HDCF620M2 – 4.0 A-HBrushless motor. 1/4” hex drive. Removable nosec-one.

Standard equipment: Two 20V MAX* batteries 2.0 A-H (DCB203) or 4.0 A-H (DCB204), multi-volt-age charger, belt hook, carrying bag.

Specifications: 0-4,400 RPM no-load VSR. 3.4 lbs. tool wt.

DCF620D2 DCF620M2

SPECIAL PRICE Call CallCOLLATED MAGAZINE ATTACHMENT (DCF6201) $91

DCF620D2

18V/20V MAX* 2 Gallon Wet/Dry VacDCV580H or DCV581HWashable HEPA filter traps 99.97% of dust at 0.3 microns. 31 CFM. Powered by 18V or 20V MAX* battery (not included). Order DCV581H for option of 18V/20V MAX* or AC/DC corded power source.

Specifications: 2 gallon tank, hose diameter 11/4”, hose length 5’, 9.9 lbs. shipping wt.

DCV580H DCV581H

SPECIAL PRICE Call CallReplacement filter (DCV5801H) $35

DCV580H

20V CORDLESS For every cordless DeWalt kit and/or bare tool purchased, you may purchase 1 of the DCB205-2 for $88 or DCB205-2CK for $138

Multiport SimultaneousFast ChargerDCB104

Four-port fast charger that charges 12V MAX* and 20V MAX* batteries at the same time. Charges 4.0 A-H 20V MAX* batteries in 40 minutes and 6.0 A-H batteries in 60 minutes. 8 amps output per port simultaneously. Thru hole wall mounts.

SPECIAL PRICE Call

CALL 800-821-5448 OR FAX 800-844-1199

DCB201 20V MAX* Li-ion 1.5 A-H Call*

DCB203 20V MAX* Li-ion 2.0 A-H Call

DCA2203C Two 20V MAX* Li-ion 2.0 A-H Call DCB101 charger, DCA1820 adaptor


DCB204 20V MAX Li-ion 4.0 A-H Call

DCB204BT 20V MAX Li-ion 4.0 A-H Bluetooth $145


DCB205CK 20V MAX* Li-ion 5.0 A-H with Call DCB115 charger & carrying bag

DCB205-2CK same as above w/two batteries Call



DCB230 20V MAX* Li-ion 3.0 A-H compact Call

DCB606 20V/60V MAX* Flexvolt 6.0 A-H Call



BATTERIES & CHARGERS

DCB205 DCB115

DCBL720B 20V MAX* Blower CallDCCS620B 20V MAX* Chainsaw CallDCD460B 60V MAX* Stud/Joist Drill CallDCD740B 20V MAX* 3/8” Right Angle Drill CallDCD780B 20V MAX* 1/2” Drill/Driver CallDCD791B 20V MAX* 1/2” Brushless Drill/Driver CallDCD985B 20V MAX* 1/2” Hammerdrill CallDCD991B 20V MAX* 1/2” Brushless Drill/Driver $139DCD996B 20V MAX* 1/2” Brushless Hammerdrill CallDCE100B 20V MAX* Blower CallDCE150B 20V MAX* Cable Cutting Tool CallDCE151B 20V MAX* Cable Stripper CallDCE511B 20V MAX* Jobsite Fan CallDCE531B 20V MAX* Pencil Vibrator 319DCE560B 20V MAX* Adhesive Dispenser-10 oz./300 ml 189DCE570B 20V MAX* Adhesive Dispenser-29 oz. 209DCE580B 20V MAX* Adhesive Dispenser-300-600 ml 209DCF620B 20V MAX* Brushless Drywall Screwgun CallDCF622B 20V MAX* XR Versa Clutch Screwgun CallDCF624B 20V MAX* XR Brushless Screwgun CallDCF880B 20V MAX* 1/2” Impact Wrench-detent CallDCF883B 20V MAX* 3/8” Impact Wrench-hog Call

DCF887B 20V MAX* 1/4” 3-speed Brushless Imp Screwdriver CallDCF889B 20V MAX* 1/2” Impact Wrench-detent CallDCF890B 20V MAX 3/8” Compact Impact Wrench CallDCF894B 20V MAX 1/2” Sq Dr Impact Wrench CallDCF897B 20V MAX* 3/4” Brushless Impact Wrench-hog CallDCF898B 20V MAX* 7/16” Sq Dr Brushless Impact Wrench $249DCF899B 20V MAX* 1/2” Brushless Impact Wrench-detent CallDCG412B 20V MAX* 41/2” Grinder CallDCG413B 20V MAX* 41/2” Grinder CallDCG413FB 20V MAX* 5” Flathead Grinder CallDCG414B 60V MAX* Grinder CallDCG426B 20V MAX* Die Grinder CallDCGG571B 20V MAX* Grease Gun CallDCH133B 20V MAX* 1” SDS Hammer CallDCH273B 20V MAX* Brushless 7/8” SDS Rotary Hammer CallDCH293B 20V MAX* Brushless 11/8” SDS Rotary Hammer CallDCH481B 60V MAX* Brushless 19/16” SDS Max Hammer CallDCH733B 60V MAX* Brushless 17/8” SDS Max Hammer CallDCL079B 20V MAX* Tripod Light (with FREE DCB204) CallDCN692B 20V MAX* 2-speed Nailer CallDCP580B 20V MAX* Brushless Planer CallDCS331B 20V MAX* Jig Saw CallDCS350B 20V MAX* Threaded Rod Cutter Call

DCS355B 20V MAX* Oscillating Multi-Tool $129DCS361B 20V MAX* 71/4” Sliding Miter Saw CallDCS367B 20V MAX* Brushless Reciprocating Saw CallDCS369B 20V MAX* Brushless Reciprocating Saw CallDCS371B 20V Cordless Band Saw CallDCS373B 20V MAX* 51/2” Metal Cutting Saw 189DCS374B 20V MAX* Brushless Band Saw CallDCS376B 20V MAX* Dual Switch Band Saw 359DCS380B 20V MAX* Reciprocating Saw CallDCS387B 20V MAX* Compact Reciprocating Saw 119DCS388B 60V Flexvolt Reciprocating Saw CallDCS391B 20V MAX* 61/2” Circular Saw CallDCS491B 20V MAX* 18 ga Swivel Head Shear CallDCS494B 20V MAX* 14 ga Swivel Head Double Cut Shear CallDCS496B 20V MAX* 18 ga Swivel Head Offset Shear CallDCS551B 20V MAX* Cut-Off Tool CallDCS570B 20V MAX* 71/4” Circular Saw CallDCS575B 60V Flexvolt 71/4” Circular Saw CallDCS577B 60V Flexvolt 71/4” Framing Saw CallDCS690B 60V Flexvolt 9” Cut-Off Saw CallDCS7485B 60V Flexvolt 81/4” Table Saw CallDCV517B 20V MAX* 1/2 Gal Wet/Dry Vac CallDCV581H 20V/18V AC/DC Wet/Dry Vac Call

BARE TOOLS

CHARGERSDC012 Worksite Radio/Charger (Li-ion) Call*DCR015 12V/20V MAX* Worksite Radio/Charger Call*DCR025 20V/60V MAX* Bluetooth Charger Radio CallDCB090 12V/20V MAX* USB Power Source Call*DCB095 8V MAX* Charger $ 42DCB102 2-port 12V/20V MAX* Charging Station 118DCB102BP same as above w/DCB204 battery CallDCB103 Dual Port Charger 99 Port 1 12V MAX*-20V MAX* Li-ion batteries Port 2 7.2V-18V NiCd/NiMH/Li-ion batteriesDCB104 4 Port 12V MAX* 20V MAX* Call Flexvolt 20V/60V MAX* Fast ChargerDCB115 12V MAX*-20V MAX* Li-ion Charger CallDCB118 20V/60V MAX* Fan Cooled Fast Charger CallDCB119 12V MAX*-20V MAX* Li-ion Call Vehicle ChargerDCB1800B 1800 Watt Portable Power Station CallDW0247 24V AC/DC Converter 49DC9310 7.2V-18V NiCd/NiMH/Li-ion 85 1-Hr. Charger DC9320 Same as DC9310 but dual port charger 105DC9319 7.2V-18V NiCd/NiMH/Li-ion Veh. Ch. 115*while supply lasts

BATTERIES

P/N DESCRIPTION PRICE

DW9057 7.2V 1.0 A-H $ 28DCB080 8V MAX* Li-ion 1.3 A-H 45DW9061 9.6V XR NiCd 1.7 A-H 47DCB127 12V MAX* Li-ion 2.0 A-H 41DC9091 14.4V XRP NiCd 2.4 A-H 78DC9096 18V XRP NiCd 2.4 A-H CallDC9144 14.4V XRP L-ion 2.0 A-H 109DC9182 18V XRP Li-ion 2.4 A-H 137DC9182C DC9182 18V battery plus 159 DC9310 charger

For every cordless DeWalt tool pur-chased, kit and/or bare tool, you may purchase one of the DCB205-2 or DCB205-2CK for a special price!

No batteries, charger or case.

BARE TOOLS, BATTERIES & CHARGERS

DCB205-2Contains two 20V 5.0 A-H batteries $88

DCB205-2CKContains two 20V 5.0 A-H batteries,DCB115 charger, canvas carrying bag$138

The 16 x 10 x 11” tall canvas carrying bag that comes with the DCB205-2CK may be purchased for only $18

For any box that has this symbol - that means that for every tool purchased in that box, unless otherwise stated in that box, you will get your choice, mix ‘n match 1 of the following options. You can select any item from Group One for free or any item from Group Two and you’ll take $100 off our 2020 price on any such item from Group Two.

For any box that has this symbol - that means that for every tool purchased in that box, you may also purchase 1 of any item in Group One for just $50, or you may purchase 1 of any tool in Group Two & subtract $50 from our standard selling price.

Group Two

DCE560B 10oz Caulk Gun DCG414B 60V 41/2” Grinder DCS371B Band Saw

DCF622B Versa-Clutch Scrugun DCG426B Die Grinder DCS374B Band Saw

DCF890B 3/8” Sq Dr Impact Wrench DCGG571B Grease Gun DCS388B 60V Recip Saw

DCF894B 1/2” Sq Dr Impact Wrench DCH133B 1” SDS Hammer DCS491B 18ga Shears

DCF897B 3/4” Sq Dr Impact Wrench DCH273B 1” SDS Hammer DCS570B 71/4” Circ Saw

DCF898B 7/16” Sq Dr Impact Wrench DCL079B Tripod Light DCS575B 60V 71/4” Circ Saw

DCF899B 1/2” Sq Dr Impact Wrench DCN692B Nailer DCS577B 60V 71/4” Circ Saw

DCG413B 41/2” Grinder

Group One

DCB115 Charger DCG412B 41/2” Grinder

DCB205 Battery DCS380B Recip Saw

DCE100B Blower DCS391B 61/2” Circ Saw

DCE511B Fan DCS551B Drywall Cut-Out Tool

DCF620B Drywall Scrugun DWH050K Larger Hammer

DCF880B 1/2” Sq Dr Impact Wrench DWH052K Breaker

DCF883B 3/8” Sq Dr Impact Wrench DWH053K Large Hammer Chipping

DCF887B 1/4” Hex Impacting Driver

= SPECIALOFFERSor

Don’t get stuck behind the 8-ball with the free product you receive that may be of little value to you. Instead, D•FD•F has custom tailored our free goods offering to al-low our customers to have exceptional flexibility to address your specific needs.

Never again will the free-goods that you receive leave you feeling as if you just scratched. Only with D•FD•F, you have ball-in-hand as you prepare to clear-the-table with your choice of the free-goods to be received, to best address your needs.


20V MAX* 1” SDS+Rotary HammerDCH273P2FREE 20V MAX* 4.0 A-H battery. SHOCKS Active Vibration Control. 3 modes: drill, chipping or rotary hammer. 2.1 joules impact energy. Order DCH273P2DHO which includes on board dust extractor (DWH303DH).

Standard equipment: Two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB101), 360° side handle, depth rod, utility hook, case.

Specifications: 0-1,100 RPM no-load speed VSR, 0-4,600 BPM, 6.8 lbs. tool wt., 11.7 lbs. shipping wt.

DCH273P2 DCH273P2DHO

SPECIAL PRICE Call Call

20V MAX* 1” SDSRotary HammerDCH133M23 modes: drill, chipping or rotary hammer. 2.6 joules impact energy. Dust Extractor ready (attach-ment D25301D).

Standard equipment: Two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB115), 360° side handle, depth rod, carrying bag.

Specifications: 0-1,500 RPM no-load speed VSR, 0-5,550 BPM, tool wt. 5.0 lbs., shipping wt. 10.6 lbs.

SPECIAL PRICE CallD25301D (DUST EXTRACTOR) Call

20V MAX* 11/8” SDSRotary HammerDCH293R2Shocks Active Vibration Control. 3 modes: drill, chipping or rotary hammer. E-Clutch®. 3.5 joules impact energy. Dust Extractor ready.

Standard equipment: Two 20V MAX* 6.0 A-H batteries (DCB206), charger (DCB115), 360° side handle, depth rod, utility hook, carrying bag.

Specifications: 0-1,000 RPM no-load speed VSR, 0-4,480 BPM, tool wt. 8.2 lbs.

SPECIAL PRICE CallDWH304DH (DUST EXTRACTOR) Call

20V MAX* 11/8” SDS+Rotary HammerDCH263R2Shocks Active Vibration Control. 3 modes: drill, chipping or rotary hammer. 3.0 joules impact ener-gy. LED light. Dust extractor ready (attachment D25205DH).

Standard equipment: Two 20V MAX* 6.0 A-H batteries (DCB206), charger (DCB115), low vibra-tion side handle, depth rod.

Specifications: 0-1,165 RPM no-load speed VSR, 0-4,300 BPM, drilling range 1/4” to 3/4”, 5.95 lbs. tool wt., 16.1 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*Dual Switch Band Saw DCS376P2Dual switch activation for safety and control. Brushless motor. LED light. Blade speed control dial. Integrated hang hook.

Standard Equipment: Two 20V MAX* 5.0 A-H batteries (DCB205), charger, one 447/8” 18 TPI blade, blade wrench, kit box.

Specifications: 0-490 FPM, 5” x 43/4” cutting capacity for rectangular, 4” for round, 13.1 lbs. tool wt., 24.7 lbs. shipping wt.


20V MAX* 71/4” Circular SawDCS570P157° bevel capacity. Two bevel stops. Brushless motor. Electric Brake.


Specifications: 0-5,500 RPM no-load speed, max output 900 watts, 5/8” arbor, 29/16” max cut at 90°, 9.0 lbs. tool wt., 12.4 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* 61/2” Circular SawDCS391P10-50° bevel capacity.


Specifications: 3,700 RPM no-load speed, max output 460 watts, 5/8” arbor, 21/4” max cut at 90°, 8.3 lbs. tool wt., 16.1 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* 51/2” Metal Cutting Circular SawDCS373P2Sight-Line™ window provides a clear view of material. 111/16” depth of cut at 90°.

Standard equipment: Two 20V MAX* 5.0 A-H batteries (DCB205), 1-hr charger (DCB101), 51/2” 30T carbide tipped metal cutting blade (20mm arbor), carrying case.

Specifications: 3,700 RPM no-load speed, 20mm arbor, 460 max watts out, 8.3 lbs. tool wt., 11.2 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* BandSaw, DCS371P1Deep Cut Band Saw, DCS374P2FREE bare tool. See pg 18 top/left box for offering. Integrated hang hook. LED light. Blade tracking adjustment increases blade life. Tool less blade changing lever.

DCS371P1 cuts 740 SFPM, max capacity is 21/2” round, and includes 20V MAX* 5.0 A-H battery (DCB205), charger, 327/8” 14/18 TPI blade, carrying bag. Tool wt. 9.4 lbs, shipping wt 15.1.

DCS374P2 has brushless motor and cuts 0-490 SFPM VS, max capacity is 43/4” round, 5” rectangu-lar, and includes two 20V MAX*, 5.0 A-H batteries (DCB205), charger, 447/8” 18 TPI blade, kit box. 13.8 lbs tool wt., 25 lbs. shipping wt.

DCS371P1 Call DCS374P2 Call

DCS371P1

20V MAX* Reciprocating SawDCS380B4-position keyless blade clamp. Pivoting adjustable shoe. Electric brake.

Specifications: 0-3,000 SPM VS, 11/8” stroke length, 6.0 lbs. tool wt., 6.5 lbs. shipping wt.

To order kit which includes a 20V MAX* 5.0 A-H battery (DCB205), charger (DCB101) and case, order DCS380P1.

SPECIAL PRICE CallKit (DCS380P1) Call

20V MAX* Reciprocating SawDCS369P1One-handed lightweight reciprocating saw is 37% lighter than DCS367. 12.5” length. LED light. Pivoting shoe.

Standard Equipment: One 20V MAX* 5.0 A-H battery (DCB205), 1-hour charger (DCB115), two blades, belt hook, carrying bag.


SPECIAL PRICE Call

20V MAX*Reciprocating SawDCS367P1Compact design – 143/4” in length. 4-position key-less blade clamp. LED light. Pivoting shoe.

Standard equipment: One 20V MAX* 5.0 A-H battery (DCB205), 1-hour charger (DCB115), car-rying bag.



DCS387P1 (while supply lasts) $209

20V CORDLESS For every cordless DeWalt kit and/or bare tool purchased, you may purchase 1 of the DCB205-2 for $88 or DCB205-2CK for $138

CALL 800-821-5448 OR FAX 800-844-1199

DCD995M2

20V MAX* 1/2” Premium HammerdrillDCD995M23-speed all-metal transmission. Ratcheting chuck. Adjustable clutch. LED light.

Standard equipment: Two 20V MAX* batteries, charger (DCB101), 360° side handle, carrying case.

Specifications: 0-450, 0-1,300 or 0-2,000 RPM no-load speed, 0-34,000 BPM in max speed, 650 max watts out, 5 lbs. tool wt., 12 lbs. shipping wt.

Part # Description Brushless A-H Price

DCD996P2 H-drill Yes 5.0 CallDCD991P2 Drill/Driver Yes 5.0 CallDCD985M2 H-drill No 4.0 CallDCD980M2 Drill/Driver No 4.0 Call

20V MAX* 1/2”HammerdrillDCD796D2

Dual speed range. Metal 1/2” ratcheting chuck. LED light. Adjustable clutch with 14 settings. 7.5” front to back.

Standard equipment: Two 20V MAX* 2.0 A-H batteries (DCB203), charger (DCB101), belt hook, bit holder, carrying case.

Specifications: 0-550 or 0-2,000 RPM no-load speed, 0-34,000 BPM in max speed, 460 max watts out, 3.6 lbs. tool wt., 8.4 lbs. shipping wt.

SPECIAL PRICE CallDrill/Driver Kit (DCD791D2) Call

20V MAX* 1/4” ImpactingScrewdriverDCF885C2

1/4” hex drive. Compact 5.55” length. 3 LED lights.

Standard equipment: Two 20V MAX* batteries (1.5 A-H DCB201), charger (DCB101), belt hook, carrying case.

Specifications: 0-2,800 RPM no-load speed, 0-3,200 IPM, max torque 1,400 in-lbs., 2.8 lbs. tool wt., 7.3 lbs. shipping wt.

SPECIAL PRICE CallDCF887D2 Call

20V MAX*1/2” ImpactWrenchDCF899P2DCF899HP23-speeds. 1/2” square drive. DCF899P2 has detent pin retention. DCF899HP2 (add $50) has hog ring retention. LED light.

Standard equipment: Two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB101), carrying case.

Specifications: 0-400, 0-1,200, or 0-1,900 RPM no-load speed, 0-2,400 IPM, max torque 700 ft-lbs., 7.2 lbs. tool wt., 12.3 lbs. shipping wt.

SPECIAL PRICE CallDCF899HP2 - Add $50

DCF899P2

20V MAX* 7/16” ImpactWrenchDCF898P23-speeds. Quick release 7/16” chuck. LED light.


Specifications: 0-400 or 0-1,200, or 0-1,900 RPM no-load speed, 0-2,400 IPM, max torque 500 ft-lbs., 7.2 lbs. tool wt., 12.3 lbs. shipping wt.



20V MAX* 3/8”Impact WrenchDCF890M2Brushless motor. Variable speed. 3/8” square drive with hog ring retention. 3 LED lights. Tool length 5.5”.


Specifications: 0-2,800 RPM no-load speed, 0-3,200 IPM, max torque 150 ft-lbs., 2.0 tool wt., 7.6 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*1/2” Impact WrenchDCF889M2

1/2” square drive with detent pin retention. Max torque 4,800 in-lbs. Variable speed trigger and electric brake. LED light for visibility. Battery fuel gauge.


Specifications: 0-1,500 RPM no-load speed, 0-2,300 IPM, max torque 400 ft-lbs., 6.8 lbs. tool wt., 12.0 lbs. shipping wt.



DCF880M2

20V MAX*ImpactWrenchDCF880M2DCF883M2FREE bare tool. See pg 18 top/left box for offering. Only the DCF880M2 receives the free bare tool. DCF880M2 has 1/2” square drive with detent pin re-tention, DCF883M2 has 3/8” square drive with hog ring retention.

Standard equipment: Two 20V MAX* 4.0 A-H bat-teries (DCB204), charger (DCB101), carrying case.

Specifications: 0-2,300 RPM no-load speed, 0-2,700 IPM, max torque 150 ft-lbs. (DCF880) or 130 ft-lbs. (DCF883), 3.4 lbs. tool wt., 8.7 lbs. shipping wt.


20V MAX* 3/4” Impact WrenchDCF897P23-speed transmission. 3/4” hog ring retention. LED light.


Specifications: 0-400, 0-1,200, or 0-1,900 RPM no-load speed, 0-2,400 IPM, max torque 700 ft-lbs., 7.2 lbs. tool wt., 12.3 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* 1/2” ImpactWrenchDCF894P21/2” detent pin anvil. Variable speed. LED light. Precision Wrench™ Control prevents overtighten-ing in forward and fastener run-off in reverse.


Specifications: 0-900 or 0-2,000 RPM no-load speed, 0-3,100 IPM, max torque 330 ft-lbs., 3.5 lbs. tool wt., 8.0 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* XRThreaded ClutchScrewgunDCF624P2Threaded Clutch Housing allows tool to be paired with most 3rd party collated fastening systems. Brushless motor. LED light.

Standard equipment: Two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB101), belt hook, carrying bag.

Specifications: 0-2,000 RPM no-load speed, 1/4” quick release hex drive, 2.8 lbs. tool wt., 7.8 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* XR Versa-Clutch™ScrewgunDCF622M2 See top of pg 18 for money sav ing o f fer . C o m p a r a b l e t o r q u e adjustment system to the DW268 on pg 4. Versa-Clutch™ Adjustable Torque System to help pre-vent damage to material and fasteners. Brushless motor. LED light.


Specifications: 0-2,000 RPM no-load speed, 132 in-lbs. max torque, 1/4” quick release hex drive, 2.8 lbs. tool wt., 8.2 lbs. shipping wt.

SPECIAL PRICE Call

20V CORDLESSFor every cordless DeWalt kit and/or bare tool purchased, you may purchase 1 of the DCB205-2 for $88 or DCB205-2CK for $138


60V MAX* 1/2” VSRStud & Joist DrillDCD460T2Two variable speed ranges. E-Clutch® system. Keyed chuck.

Standard equipment: Two 60V MAX* 6.0 A-H batteries (DCB606), charger (DCB118), 2-position side handle, adjustable bail handle, chuck key and holder, carrying bag.

Specifications: 0-300 or 0-1,250 RPM no-load speed, 12.9 lbs. tool wt., 24.3 lbs. shipping wt.

SPECIAL PRICE Call

60V MAX* 71/4”Circular SawDCS575T2Electric brake. Rear pivot. Up to 339 cuts per charge in 2”x4” pine. Bevel capacity 57°. 29/16” depth of cut at 90°, 15/8” at 45°.

Standard equipment: Two 60V MAX* 6.0 A-H batteries (DCB606), charger (DCB118), 71/4” blade, blade change wrench, carrying bag.

Specifications: 5,800 RPM no-load speed, 1,600 max watts out, 5/8” arbor, 7.6 lbs. tool wt., 14.6 lbs. shipping wt.

SPECIAL PRICE Call

60V MAX*Reciprocating SawDCS388T2Variable speed. Keyless blade clamp. Pivoting shoe for different applications. LED light.

Standard equipment: Two 60V MAX* 6.0 A-H batteries (DCB606), charger (DCB118), blade, carrying bag.


SPECIAL PRICE CallDCS388T1 Call

60V MAX* 61/2” Track Saw Kit w/TrackDCS520ST1Brushless motor. Bevel capacity 47°. Max cut at 90° 21/8”, at 45° 15/8”. 59” track. To purchase kit without 59” track, order DCS520T1.

Standard equipment: One 60V MAX* 6.0 A-H battery (DCB606), charger (DCB118), 61/2” blade, blade wrench, kit box.

Specifications: 1,750-4,000 RPM no-load speed, 5/8” arbor, 12.5 lbs. tool wt., 19.4 lbs. (T1) or 33.5 lbs. (ST1) shipping wt.

DCS520T1 Call DCS520ST1 Call

60V MAX* 17/8” SDS MaxRotary HammerDCH733X213.3 joules of impact energy. Brushless motor. Active Vibration Control® reduces vibration. E-Clutch® system. 3 modes: drill, chipping or rotary hammer.

Standard equipment: Two 60V MAX* 9.0 A-H batteries (DCB609), charger (DCB118), 360° side handle, depth rod, kit box.

Specifications: 177-355 RPM no-load speed, 1,350-2,705 BPM, Tool wt. 20 lbs., shipping wt. 40 lbs.

SPECIAL PRICE Call

60V MAX* 81/4”Table SawDCS7485T1Brushless motor. Telescoping fence rails. 24” rip capacity. Depth of cut at 90° 21/2”, at 45° 13/4”.

Standard equipment: One 60V MAX* 6.0 A-H battery (DCB606), charger (DCB118), 81/4” blade, two blade wrenches, blade guard, rip fence, miter gauge, metal roll cage base.

Specifications: 5,800 RPM no-load speed, 5/8” arbor, 48 lbs. tool wt., 59 lbs. shipping wt.


60V MAX* 71/4”Worm Drive SawDCS577X1Electric brake. Bevel capacity 53° with stops at 45° and 22.5°. 27/16” depth of cut at 90°.

Standard equipment: One 60V MAX* 9.0 A-H battery (DCB609), charger (DCB118), 71/4” blade, blade change wrench, rafter hook, carrying bag.

Specifications: 5,800 RPM no-load speed, 2,400 max watts out, 5/8” arbor, 10.9 lbs. tool wt.

SPECIAL PRICE Call

60V MAX* Pipe ThreaderDCE700X2Thread 1/2”-2” black iron pipe, rigid conduit, and more. Pipe clamp with depth gauge for quick setup. Anti-rotation E-Clutch® system. Compatible with Ridgid® 12R** style die heads.

Standard equipment: Pipe clamp with depth gauge, two 60V MAX* 9.0 A-H batteries (DCB609), charger (DCB118), hard case and soft bag.

Specifications: 30 RPM forward, 40 RPM reverse, peak HP 1,400 W, 20 lbs. tool wt., 60 lbs. shipping wt.

SPECIAL PRICE Call

60V MAX* 2” SDS MaxCombination HammerDCH773Y219.4 joules impact energy. E-Clutch® system reduces reactionary torque. 7 position variable speed dial. SHOCKS Active Vibration Control.

Standard equipment: Two 60V MAX* 12.0 A-H batteries (DCB612), charger, side handle, carrying case.

Specifications: 145-290 RPM no-load speed, 1,105-2,210 BPM, optimal concrete drilling 7/8”-17/8”, 21 lbs. tool wt., 41.4 shipping wt.

SPECIAL PRICE Call

60V MAX* 41/2”-6” GrinderDCG414T2See top of pg 18 for FREE offer.

60V MAX* power compares to 13-amp cord-ed grinders. E-Clutch® overload protection and Kickback Brake. Allows up to 6” wheel size for cutting and grinding.

Standard equipment: Two 60V MAX* 6.0 A-H bat-teries (DCB606), charger (DCB118), 41/2” Type 27 wheel, 41/2” Type 27 and 6” guards, wrench, flang-es, carrying bag.

Specifications: 9,000 RPM no-load speed, 1,700 max watts out, 5/8”-11 spindle, tool wt. 4.7 lbs.

SPECIAL PRICE Call

60V MAX* 13/4”SDS MaxCombination HammerDCH614X210.5 joules impact energy. E-Clutch® system reduces reactionary torque. 7 position variable speed dial. SHOCKS Active Vibration Control.

Standard equipment: Two 60V MAX* 9.0 A-H batteries (DCB609), charger, side handle, carrying case.

Specifications: 190-380 RPM no-load speed, 1,450-2,900 BPM, optimal concrete drilling 5/8”-11/4”, 15 lbs. tool wt., 32.8 lbs. shipping wt.

SPECIAL PRICE Call

60V MAX* 19/16”SDS MaxHammerDCH481X2FREE bare tool, see pg 18 top/left box for offering. 6.1 joules impact energy. E-Clutch® system reduc-es reactionary torque. SHOCKS Active Vibration Control reduces vibration.

Standard equipment: Two 60V MAX* 9.0 A-H batteries (DCB609), charger (DCB118), side han-dle, carrying case.

Specifications: 540 RPM no-load speed, 3,150 BPM, 11.9 lbs. tool wt., 25.7 lbs. shipping wt.

SPECIAL PRICE Call

20V & 60V CORDLESS


Other Popular Combo PacksDCK262M2–20V MAX* Brushless Drywall Screwgun (DCF620), Brushless 1/4” Hex Impacting Screwdriver (DCF886), two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB112), carrying bag. $319*

DCK286D2 - 20V MAX* 1/2” Brushless Hammerdrill (DCD795), 1/4” Brush- less Impacting Screwdriver (DCF886), two 20V MAX* 2.0 A-H batteries (DCB203), charger (DCB101), carrying bag. While supply lasts. $285*

DCK490L2–20V MAX* 1/2” Hammerdrill (DCD985), Recip Saw (DCS381), 1/4” Impacting Screwdriver (DCF885), LED Worklight (DCL040), two 20V MAX* 3.0 A-H batteries (DCB200), charger (DCB101), carrying bag. $459*

DCK491L2–20V MAX* 1/2” Hammerdrill (DCD985), Recip Saw (DCS381), 61/2” Circular Saw (DCS393), LED Worklight (DCL040), two 20V MAX* 3.0 A-H batteries (DCB200), charger (DCB101), carrying bag. $459*

DCK492L2–20V MAX* 1/2” Hammerdrill (DCD985), Recip Saw (DCS380), 1/4” Impacting Screwdriver (DCF885), LED Worklight (DCL040), two 20V MAX* 3.0 A-H batteries (DCB200), charger (DCB101), carrying bag. Call**While supply lasts

20V MAX”1” SDS Rotary Hammer1/4” Impacting DriverCombo Kit; DCK233P220V MAX* Li-ion 5.0 A-H battery operated brush-less tools include 1” SDS Rotary Hammer and 1/4” Impacting Screwdriver.Standard equipment: 20V MAX* Li-ion 1” SDS Rotary Hammer (DCH133) and 1/4” Brushless Impacting Screwdriver (DCF887), two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB115), carrying bag. 13.5 lbs. shipping wt.


20V MAX*Drywall ScrewgunCut-Out Tool Combo KitDCK263D220V MAX* Li-ion 2.0 A-H battery operated tools include 1/4” hex chuck Brushless Drywall screwgun and Cut-Out Tool. Both tools have LED lights.

Standard equipment: 20V MAX* Li-ion Brushless Drywall screwgun (DCF620) and Cut-Out Tool (DCS551), two 20V MAX* 2.0 A-H batteries (DCB203), charger (DCB112), carrying bag. 9.8 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*Drywall Screwgun1/4” Impacting DriverCombo Kit; DCK267D2/M220V MAX* Li- ion battery operated brushless tools include Drywall Screwgun and 1/4” Impacting Screwdriver.

Standard equipment: 20V MAX* Li-ion 1/4” hex drive Brushless Drywall Screwgun (DCF620) and 1/4” Brushless Impacting Screwdriver (DCF887), two 20V MAX* batteries, charger (DCB115), car-rying bag. Shipping wt. 9.9 lbs (D2) or 11.0 (M2).

DCK267M2 (4.0 A-H) Call DCK267D2 (2.0 A-H) Call*

*While supply lasts

DCK267M2

20V MAX”1/2” Drill/Driver1/4” Impacting DriverCombo Kit; DCK283D2Instead of buying this tool, buy the DCK287D2 - pictured right cuz it has a better drill, free bit set, for only $10 more. Standard equipment: 20V MAX* Li-ion 1/2” Brushless Drill/Driver (DCD791) and 1/4” Brushless Impacting Screwdriver (DCF887), two 20V MAX* A-H batteries (DCB203), charger (DCB112), carry-ing bag. 9.2 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* 1/2” Drill/Driver 1/4” Impacting DriverCombo KitDCK240C220V MAX* Li-ion 1.3 A-H battery operated tools include 1/2” Drill/Driver and 1/4” Impacting Screwdriver.

Standard equipment: 20V MAX* 1/2” Drill/Driver (DCD771) and 1/4” Brushless Impacting Screwdriver (DCF885), two 20V MAX* 1.3 A-H batteries (DCB207), charger (DCB107), carrying bag. 9.2 lbs. shipping wt.

SPECIAL PRICE Call

D•F ULTRA-PREMIUM IMPACT-TESTED™ NUT

RUNNERSHigher quality • Lower prices

Wider selection • Deeper inventory

ALL WITH MAGNET 1/4” 5/16” 3/8”LENGTH 10 100 10 100 10 1001-3/4” $2.15 $1.50 $2.15 $1.50 $2.35 $1.652-9/16” 2.50 1.75 2.50 1.75 2.65 1.854” 3.85 2.70 3.85 2.70 4.15 2.906” 5.35 3.75 5.50 3.85 5.90 4.1512” 13.20 9.25 15.65 11.00 16.85 11.85

Note: Combining very high torque and long length will severly hurt the life expectancy of most any item; the nipple on the male end will shear off of the 12” socket typically after drilling 250-300 #12 dia T-3 screws into .210” thick steel with a DCF887. Your results may vary.

20V MAX* 1/4” HexImpacting ScrewdriverDCF887M2 See top of pg 18 for a money saving offer.

Brushless motor. 1/4” hex drive. 3 LED lights. 3 speed settings. Tool length 5.3”.

Standard equipment: Two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB101), belt hook, carrying case.

Specifications: 0-1,000/0-2,800/0-3,250 RPM no-load speed, 0-3,600 BPM, max torque 0-240/1,500/1,825 in-lbs. 3.5 lbs. tool wt., 8.9 lbs. shipping wt.

SPECIAL PRICE Call

CORDLESS COMBOS

20V MAX* 1/2” Hammerdrill Reciprocating Saw Combo Kit; DCK294P220V MAX* Li-ion 5.0 A-H battery operat-ed brushless tools include 1/2” Hammerdrill and Reciprocating saw.

Standard equipment: 20V MAX* Li-ion 1/2” Brushless Hammerdrill (DCD996) and 20V MAX* Li-ion Brushless Reciprocating Saw (DCS367), two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB101), carrying bag. 16.4 lbs. shipping wt.

SPECIAL PRICE Call

For every cordless DeWalt kit and/or bare tool purchased, you may purchase 1 of the DCB205-2 for $88 or DCB205-2CK for $138

20V MAX* 1/2” Hammerdrill1/4” Impacting Driver Combo KitDCK287D2FREE 34-piece bit set included.

Standard equipment: 20V MAX* Li-ion 1/2” Brushless Hammerdrill (DCD796), 20V MAX* Li-ion 1/4” Brushless Impacting Screwdriver (DCF887), two 20V MAX* 2.0 A-H batteries (DCB203), charger (DCB112), carrying bag. 9.2 lbs. shipping wt.

SPECIAL PRICE Call

FREE

Before you buy this tool, checkout 287

to right


20V MAX* XR®

6-Tool Combo KitDCK695P220V MAX* XR® 5.0 A-H battery operated tools include: Hammerdrill, Impacting Screwdriver, Reciprocating Saw, 71/4” Circular Saw, Angle Grinder and LED Work Light.

Standard equipment: 20V MAX* Li-ion 5.0 A-H tools: 1/2” Hammerdrill (DCD996), 1/4” Impacting Screwdriver (DCF887), Reciprocating Saw (DCS367), 71/4” Circular Saw (DCS570), 41/2” Angle Grinder (DCG413) and LED Work Light (DC040). Two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB115), carrying bag. 31.5 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* XR®

6-Tool Combo KitDCK694P220V MAX* XR® 5.0 A-H battery operated tools include: Hammerdrill, Impacting Screwdriver, Reciprocating Saw, 71/4” Circular Saw, Oscillating Multi-Tool and LED Work Light.

Standard equipment: 20V MAX* Li-ion 5.0 A-H tools: 1/2” Hammerdrill (DCD996), 1/4” Impacting Screwdriver (DCF887), Reciprocating Saw (DCS367), 7 1/ 4” Circular Saw (DCS570), Oscillating Multi-Tool (DCS355) and LED Work Light (DC040). Two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB115), carrying bag. 31.5 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* XR®

5-Tool Combo KitDCK594P220V MAX* XR® 5.0 A-H battery operated tools include: Hammerdrill, Impacting Screwdriver, Reciprocating Saw, 71/4” Circular Saw and LED Work Light.

Standard equipment: 20V MAX* Li-ion 5.0 A-H tools: 1/2” Hammerdrill (DCD996), 1/4” hex Impacting Screwdriver (DCF887), Reciprocating Saw (DCS367), 71/4” Circular Saw (DCS570), LED Work Light (DCL040). Two 20V MAX* 5.0 A-H bat-teries (DCB205), charger (DCB115), carrying bag. 31.5 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*5-Tool Combo KitDCK590L220V MAX* Li-ion 3.0 A-H battery operated tools include 1/2” hammerdrill, 1/4” Impacting Screwdriver, Reciprocating Saw, 61/2” Circular Saw and LED Work Light.

Standard equipment: 20V MAX* Li-ion 1/2” Hammerdril l (DCD985), 20V MAX* 1/4” hex Impacting Screwdriver (DCF885), Reciprocating Saw (DCS381), 61/2” Circular Saw (DCS393), LED Work Light (DCL040), two 20V MAX* 3.0 A-H bat-teries (DCB200), charger (DCB101), carrying bag. 29.9 lbs. shipping wt.

SPECIAL PRICE Call

20V/60V MAX*1/2” Hammerdrill1/4” Impacting Driver DCK299D1T11/2” Brushless Hammerdrill and 1/4” Brushless Impacting Screwdriver. Includes one Flexvolt 20V/60V 6.0 A-H battery and one 20V 2.0 A-H battery.

Standard equipment: 20V MAX* Li- ion 1/ 2” Hammerdril l (DCD996), 20V MAX* Li-ion 1/4” Impacting Screwdriver (DCF887), 20V MAX* 2.0 A-H battery (DCB203), 60V MAX* 6.0 A-H battery (DCB606), charger (DCB118), carrying bag.

Specifications: see above box for specs for the DCD996 and DCF887. 10 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*4-Tool Combo KitDCK494P220V MAX* Li-ion 5.0 A-H battery operated tools include 1/2” Hammerdrill, 1/4” Impacting Screwdriver, Compact Reciprocating Saw and LED Work Light.

Standard equipment: 20V MAX* Li-ion Brushless: 1/ 2” Hammerdri l l (DCD996), 1/ 4” Impacting Screwdriver (DCF887), Compact Reciprocating Saw (DCS367), LED Work Light (DC040), two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB101), carrying bag. 17.1 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*4-Tool Combo KitDCK498P220V MAX* Li-ion 5.0 A-H battery operated brush-less tools include 1/2” Impact Wrench, 1/4” Impacting Screwdriver, 41/2” Cut-off Tool and LED Work Light.

Standard equipment: 20V MAX* L i - ion Brushless: 1/2” Impact Wrench (DCF894), 1/4” Impacting Screwdriver (DCF887), 41/2” Cut-off Tool (DCG412), LED Work Light (DCL040), two 20V MAX* 5.0 A-H batteries, charger (DCB115), carry-ing bag. 19.4 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*1/2” Hammerdrill1/4” Impacting DriverCombo KitDCK299P2 See top of pg 18 for a money saving offer. 20V MAX* Li-ion battery operated tools include 1/2” Brushless Hammerdrill and 1/4” Brushless Impacting Screwdriver.

Standard equipment: 20V MAX* Li-ion 1/2” Hammerdrill (DCD996), 20V MAX* Li-ion 1/4” Impacting Screwdriver (DCF887), two 20V MAX* 5.0 A-H (DCB205) batteries, charger (DCB101), kit box.

Specifications: DCD996: 0-450/0-1,300/0-2,250 RPM no-load speed, 0-38,250 BPM in max speed, 820 max watts out, LED light, tool wt. 4.7 lbs. DCF887: 1/4” hex drive, 0-1,000/2,800/3,250 RPM no-load speed, 0-3,600 BPM, max torque 1,825 in-lbs., LED light, 3.4 lbs. tool wt., 14.0 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* 1/2” Hammerdrill1/4” Impacting Driver Combo KitDCK290L2 See top of pg 18 for a money saving offer.

FREE 34-piece bit set included.

Standard equipment: 20V MAX* Li-ion 1/2” Hammerdrill (DCD985), 20V MAX* Li-ion 1/4” Impacting Screwdriver (DCF885), two 20V MAX* 3.0 A-H batteries (DCB200), charger (DCB101), carrying bag. 13.2 lbs. shipping wt.

SPECIAL PRICE Call

FREE

CORDLESS COMBO PACKS

20V MAX*1/2” Hammerdrill1/4” Impacting Driver DCKTS299P2 See top of pg 18 for a money saving offer.

1/2” Brushless Hammerdrill and 1/4” Brushless Impacting Screwdriver. Includes ToughSystem® storage box.

Standard equipment: 20V MAX* Li- ion 1/ 2” Hammerdrill (DCD996), 20V MAX* Li-ion 1/4” Impacting Screwdriver (DCF887), two 20V MAX* 5.0 A-H bat-teries (DCB205), charger (DCB115), ToughSystem®

storage box (DWST08130).

Specifications: see above box for specs for the DCD996 and DCF887. 18.4 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* 1/2” Hammerdrill Reciprocating Saw Combo KitDCK292L220V MAX* Li-ion 3.0 A-H battery operated tools include 1/2” Hammerdrill and Reciprocating saw.

Standard equipment: 20V MAX* Li-ion 1/2” Hammerdrill (DCD985) and 20V MAX* Li-ion Reciprocating Saw (DCS380), two 20V MAX* 3.0 A-H batteries (DCB200), charger (DCB101), carry-ing bag. 16.0 lbs. shipping wt.


CALL 800-821-5448 OR FAX 800-844-1199

Heat GunD26950Built-in overload protection. Variable temperature control allows for adjustment of the heat settings.

Standard equipment: Cone nozzle, fishtail sur-face nozzle, hang ring, kickstand support, 10 foot power cord.

Specifications: 13-amps (120V, AC), CFM 16 max, 120-1,100°F temp range, weight 2.1 lbs.


ToughSystem™ StorageDurable 4mm thick structural foam box wall gives robust strength. Integrated water seal. Metal carrier with adjustable foldable brackets allows tailored configuration. Music Player + Charger is stackable and cart compatible, runs on AC power, 12V MAX* or 20V MAX* batteries, and charges 12V MAX* and 20V MAX* batteries. Connectivity to Bluetooth®, 3.5mm auxiliary input, 5V/1A USB charger.

Description Capacity LxWxH Price

DS150C Case 66 lbs. 21”x13”x6” $ 42DS300C Case 88 lbs. 21”x13”x12” 47DS400C Case 110 lbs. 21”x14”x15” 54DSCarrier 26”x9”x37” 163DST38000 63 gal. 38”x23”x24” 88 Mobile ChestDST08810 Music Player + Charger 279

DS300C

DSCarrier

DST08810

Handheld Blower KitDCBL720P1Clear debris with an air volume up to 400 cubic feet per minute at 90 MPH. Lightweight design (7.1 lbs.) for easy control. Variable speed trigger and speed lock. Brushless motor.

Standard equipment: 20V MAX* 5.0 A-H battery (DCB205), charger.

Specifications: Air speed 90 MPH, 400 CFM, noise rating 61 dB(A). 7.1 lbs. tool wt., 10.7 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX*Corded/CordlessAir InflatorDCC020IBThree power sources available for maximum ver-satility. Digital air pressure gauge with automatic shutoff. LED light. High volume inflation and defla-tion modes.

Standard equipment: 133/4’ 12V DC power cord, 29” high-pressure hose, valve adapter, inflator needle.

Specifications: Powered by 20V MAX* battery, 12V DC or 110V AC (20V MAX* battery and AC power adapter sold separately), 3-160 PSI high pressure range, .5 SCFM high pressure, 15.2 SCFM high volume, 5.5 lbs. tool wt.

SPECIAL PRICE Call

18 GalWet DryShop Vac9625310Contractor grade wet/dry shop vac featuring 6.5 peak horsepower. Comes with Ultra-Web® car-tridge filter and high efficiency disposable filter bag. Convenient 18’ power cord.

Standard equipment: 11/2” diameter 12’ hose, two extensions wands, 14” wet/dry nozzle, crevice tool, claw utility nozzle and 11/2” adapter.

Specifications: 12-amp (120V, AC only), 6.5 peak horsepower, 195 cfm airflow, 60 in sealed pressure (inches of water), 32 lbs. shipping wt.


#906730 2-pack replacement bags $18.99

5 Spot CrossLine LaserDW0825LGGreen beam. 5 spot Cross Line laser accurate to ±1/8” at 33 ft. for horizontal line (level and tilt), ver-tical (plumb) line, plumb dot, and level dot square for multiple applications. Self-leveling range 5°. Built in magnetic pivoting bracket.

Standard equipment: Ceiling bracket, 12V MAX* 2.0 A-H battery (DCB127), charger, magnetic enhancement plate, laser enhancement glasses, target card, case.

Specifications: Indoor range 100’ (165’ with detector DW0892-G, not included), green beam.

SPECIAL PRICE Call

2 Spot CrossLine LaserDW0822LGGreen beam. 2 spot Cross Line laser accurate to ±1/8” at 33 ft. for horizontal and vertical alignment projects. Self-leveling range 5°. Built in magnetic pivoting bracket.

Standard equipment: Ceiling bracket, 12V MAX* 2.0 A-H battery (DCB127), charger, magnetic enhancement plate, laser enhancement glasses, target card, case.

Specifications: Indoor range 100’ (165’ with detector DW0892-G, not included), green beam.

SPECIAL PRICE Call

Cross Line LasersDW088LGDW088LRDW088KCross Line lasers accurate up to ±1/8” at 30 ft. for various leveling and layout applications. Self-leveling range 5°. Built in magnetic pivoting bracket.

DW088LG Green beam (4x brighter than red); visible range 100’; operates off of 12V MAX 2.0 A-H battery. Kit includes battery, charger, target card. Call

DW088LR Red beam; visible range 50’; operates off of 4 “AA” batteries (included) or 12V MAX* battery (not included). Kit includes target card, enhancement glasses. Call

DW088K Red beam; visible range 50’; operates off of 3 “AA” batteries (included). Call

DW088LG

12V MAX*3 X 360°Self-LevelingLine LaserDW089LGGreen beam laser technology is four times brighter than red. Accurate up to ±1/8” at 30 ft. Self-leveling range 5°. Indoor visibility range 100 ft. Built in magnetic pivoting bracket.

Standard equipment: Ceiling mount, 12V MAX* 2.0 A-H battery (DCB127), charger, target card, laser enhancement glasses.

Specifications: Indoor range 100’ (165’ with detector-not included), green beam.

SPECIAL PRICE Call

3 BeamSelf-LevelingLine LaserDW089K3 beam laser to aid in 90° layout. Micro adjust knob for accuracy. 2x brighter diode to increase visibility. Accurate to ±1/8” at 30 ft. Self-leveling range 5°. Indoor visibility range 50 ft. One button operation. Built in mag-netic pivoting bracket.

Standard equipment: Ceiling mount, 4 “AA” batteries, kit box.

Specifications: Indoor range 50’ (165’ with detector-not included), operates off of 4 “AA” batteries, red beam.

SPECIAL PRICE Call

3 Beam Laser PointerDW083KSelf-leveling point laser accurate to ±1/4” at 100 ft. Focused laser beam keeps dot size small over lon-ger distances for improved accuracy and visibility. Indoor visibility range 100’. Built-in magnetic piv-oting bracket. Overmolded housing for durability. Operates off of 4 “AA” batteries (included).

SPECIAL PRICE Call

For every cordless DeWalt kit and/or bare tool purchased, you may purchase 1 of the DCB205-2 for $88 or DCB205-2CK for $138


165 PSIPancake CompressorDWFP55126165 max PSI 6 gallon tank. Delivers 2.6 SCFM at 90 PSI, 3.7 SCFM at 45 PSI. 75.5 dBA noise level for quiet work environment. Oil free pump for main-tenance free operation. Two universal couplers to support two users.

Specifications: 10-amps (120V, AC only), .9 HP, 6 gallon tank, 30 lbs. tool wt., 34 lbs. shipping wt.

SPECIAL PRICE Call

60V MAX* 2.5 Gal CompressorDCC2560T1.4 HP brushless motor. Oil free pump. OneTurn™ regulator for fast, accurate pressure adjustments. Ball drain valve. Up to 1,220 nails per charge.

Standard equipment: One 60V MAX* 6.0 A-H battery (DCB206), charger (DCB115).

Specifications: 135 max PSI, 1.5 SCFM at 40 PSI, 1.2 SCFM at 90 PSI, one coupler, 21.5 lbs. tool wt., 28.8 lbs. shipping wt.

SPECIAL PRICE Call

8V MAX*GyroscopicScrewdriverDCF680N2 or DCF681N2Motion activation variable speed. 1/4” hex drive. LED light. Use for fastening into wood, plastic, or light-gauge metal.

DCF680N2 - Adjustable two-position handle - in-line or pistol grip. DCF681N2 - has conduit reamer feature which allows ream of 1/2”, 3/4” and 1” conduit.

Standard equipment: Two 8V MAX* Li-ion 1.0 A-H batteries (DCB080), 8V MAX* charger (DCB095), bit tip holder, carrying bag.

Specifications: 0-430 RPM VSR no-load speed, 1.1 lbs. tool wt., 3.0 lbs. shipping wt.

DCF680N2 Call DCF681N2 $139

20V MAX*Pencil

VibratorDCE531M1

11/8” diameter vibrator. 14,000 vibrations per min-ute under load. 4’ long flexible shaft.

Standard equipment: 20V MAX* 4.0 A-H battery (DCB204), charger.

Specifications: 14,000 VPM under load, 14.4 lbs. shipping wt.


20V MAX*Oscillating Multi-ToolDCS355D1 or DWE315KVariable speed. QUICK-CHANGE™ Accessory System. Universal Accessory Adaptor. LED light. Includes 28-piece cutting and sanding attachment accessory kit.

DCS355D1 - 20V MAX* 2.0 A-H battery (DCB203), charger (DCB101), carrying bag. Brushless motor. 0-20,000 oscillations per minute, 3.2 lbs. tool wt., 6.8 lbs. tool wt. Call

DWE315K - 3-amps (120V, AC only) 0-22,000 oscillations per minute, 3.1 lbs. tool wt., 7.3 lbs. tool wt. Call

SPECIALTY TOOLS

20V MAX* 41/2”Cut-Off ToolDCG412P2Trigger switch, two position side handle, spindle lock, quick change wheel release, battery fuel gauge.

Standard equipment: Two 20V MAX* 5.0 A-H batteries (DCB205), charger (DCB101), type 1 guard, wrench, carrying bag.

Specifications: 6,500 RPM no-load speed, 5/8” spindle, 6.5 lbs. tool wt., 15.5 lbs. shipping wt.

SPECIAL PRICE Call

20V MAX* Angle GrinderDCG413R2 – 41/2”DCG413FR2 – 5” FlatheadFREE bare tool. See pg 18 top/left box for offer-ing. Paddle switch, brushless motor, kickback brake, E-Switch ProtectionTM, two stage trigger, spindle lock.

Standard equipment: Two 20V MAX* Li-ion 6.0 A-H batteries (DCB206), charger (DCB115), type 27 guard, hex key, inner and outer flange, carrying bag.

Specifications: 9,000 RPM no-load speed, 800 max watts out, 5/8” spindle, 4lbs. tool wt.

DCG413R2 Call DCG413FR2 $449

DCG413R2

DCG413FR2

20V MAX*Grease GunDCGG571M1Variable speed trigger offers precise control of grease flow. 42” flexible hose reaches hard to access grease fittings. LED light for visibility.

Standard equipment: 20V MAX* 4.0 A-H battery (DCB204), charger (DCB101), shoulder strap, car-rying case.

Specifications: 10,000 psi max pressure, 5.0 oz/min max volume, 14.5 oz. cartridge capacity, tool wt. 9.5 lbs.

SPECIAL PRICE Call

20V MAX* 3/8”Li-ionRight Angle DrillDCD740C12-speed ranges. 3/ 8” ratcheting chuck. Multi-grip trigger.

Standard equipment: one 20V MAX* 1.5 A-H battery (DCB201), charger (DCB101), belt hook, carrying case.




Press Tool w/Jaws DCE200M2K CallPress 1/2” to 4” copper pipe and stainless steel. Press 1/2” to 2” black carbon steel and PEX pipe. Includes 20V MAX* 4.0 A-H battery (DCB204), charger (DCB115), five 1/2” to 2” crimping jaws, shoulder strap, kit box. 7.2 lbs. tool wt., 57.5 lbs. shipping wt.

Dieless Cable Crimper DCE350M2 CallSix ton force crimps up to 8 AWG/750 MCM copper and aluminum cable. Includes 20V MAX* 4.0 A-H battery (DCB204), charger (DCB115), shoulder strap, kit box. 11.2 lbs. tool wt., 24.7 lbs. shipping wt.

Cable Cutting Tool DCE150D1 CallCapable of cutting 750 MCM copper and 1,000 MCM aluminum cable. Hardened steel cutting blade. Includes 20V MAX* 2.0 A-H battery (DCB203), charger (DCB115), shoulder strap, hang hook. 6.7 lbs. tool wt., 13.8 lbs. shipping wt.

Cable Stripper Kit DCE151TD1 $379Strip copper (6 AWG to 750 MCM) or aluminum (5 AWG to 900 MCM) electrical cable without an exposed knife. Brushless motor. Includes 20V MAX* 2.0 A-H battery (DCB203), charger (DCB115), DCE1513-DCE1522 bushings, kit box. 2.4 lbs. tool wt., 13.1 lbs. shipping wt.

1” Expander Tool DCE400D2 CallExpand PEX Type-A tubing 3/8” to 1”. Automatically rotating head action for even expansion. Includes 20V MAX* 3.0 A-H battery (DCB200), charger (DCB115), 1/2”, 3/4”, and 1” expander heads, grease, kit box. 3.9 lbs. tool wt., 11.8 lbs. shipping wt.

DCE200M2K DCE350M2DCE150D1

DCE151TD1

DCE400D2

DCS355D1DCF680N2

CALL 800-821-5448 OR FAX 800-844-1199

Bench GrindersDW756 – 6” DW758 – 8”Durable cast iron motor housing with rear exhaust ports. Comes with 36 and 60 grit wheels, eye shields, spark deflectors, tool rests, adjusting wrench.

DW756 DW758

Wheel size 6” 8”AMPS (120V, AC only) 4.0 4.2Horsepower 5/8 3/4RPM no-load speed 3,450 3,600Spindle diameter 1/2” 5/8”Tool wt. 28.5 lbs. 39.5 lbs.

Regular Price $176 $241Special Price $98 $134

60V MAX*Dust ExtractorDCV585BOSHA table 1 compliant when paired with an appropriate dust shroud (see page 9). Wet or dry applications. Dual HEPA filters with automatic filter cleaning. Run on Flexvolt 20V/60V MAX batteries (not included - see page 18).

Standard equipment: One fleece bag, two HEPA filters.

Specifications: 2 gallon tank, 125 CFM, 8’ hose length, 17.6 lbs. tool wt., 19.5 lbs. shipping wt.

SPECIAL PRICE Call

HEPA DustExtractorsDWV012 (10 gal) 155 CFM or DWV010 (8 gal) 150 CFM - HEPA Dust Extractor powered by 15-amp motor. Table 1 O S H A c o m p l i a n t . Automatic Filter Clean for continuous operation. 15’ kink resistant hose. 2 HEPA filters included. See right for attachments.

*While supply lasts. Only 378 on hand.

DWV010 Call DWV012 CallDWV9330 Replacement HEPA Filter-2 pack 74.00

DWV9000 Universal Connector $19.85DWV9130 35mm Tool Adapter $9.75

DWV9400 Plastic Tank Liner-5 pack $13.95DWV9401 Paper Dust Bag-5 pack $13.95DWV9402 Fleece Dust Bag-5 pack $25.95

WET/DRY VACDCV581H - 2 gal wet/dry vac, 31 CFM, powered by 18V or 20V MAX* battery (not included) or 120V AC. Reusable filter traps dust with 99.97% efficien-cy at 1 micron. 5’ crush resistant hose. Call

DWV010

Right Angle AttachmentDWARA100Attach to your impact driver and drive screws and holes in tight, hard to reach spaces. Floating magnet secures fasteners. Can be used for bit tips, nutdrivers, impact hole saws, and spade bits. $23.9512” Right Angle Flex ShaftDWARAFSRapid Load head for easy bit changes. 1/4” hex shank. 90° head and flexible shaft reaches tight spaces. $29.9518 Ga Shear AttachmentDWASHRIRAttaches to most 18V/20V impact drivers and cuts up to 18 ga material. 360° head.1/4” hex shank. $54.95

DWARA100

DWARAFS

DWASHRIR

60V MAX*9” Cut-off SawDCS690X2Brushless motor. Rotatable 5-position guard. 3-position front handle enables cutting in horizon-tal or vertical position. Heavy load indicator light. Dual-sided water feed system when cutting con-crete or masonry for OSHA compliance.

Standard equipment: Two 60V MAX* 9.0 A-H batteries (DCB609), charger, one cut-off wheel and one diamond wheel.

Specifications: 6,500 RPM no-load speed, 7/8” arbor, 9” blade diameter, 31/4” depth of cut, 10.9 lbs. tool wt., 20.2 lbs. shipping wt.

SPECIAL PRICE Call

Die GrindersDWE4887/N – 11/2”Paddle switch. Order with (DWE4887) or without (DWE4887N) lock-on switch. 1/4” collet. 4.2-amps (120V, AC/DC) 25,000 no-load speed, 14” O/A length, 3.7 lbs. tool wt. $149

DW888 – 2”Trigger switch with lock-on. 1/4” collet. 5-amps (120V, AC/DC), 19,000 RPM no-load speed, spindle thread 1/4” collet and 1/8” sleeve, 19.2” O/A length, 7.5 lbs. tool wt. $239

DWE4997VS/NVS – 2”Variable speed paddle switch. Brushless. Order with (DWE4997VS) or without (DWE4997NVS) lock-on switch. 1/4” collet, 1/8” reducing sleeve. Kickback brake. 13-amps (120V, AC/DC), 7,500 -25,000 no-load speed, 4.3 lbs. tool wt. $279

8 PIECE CARBIDE BUR SET (DBBURK8) $99.95

20V MAX*11/2” Die GrinderDCG426M2Brushless motor. Variable speed. Dual position rocker switch. LED lights at the nose. 1/4” collet.

Standard equipment: Two 20V MAX* 4.0 A-H batteries (DCB204), charger (DCB115), 1/4” collet, two wrenches, carrying bag.

Specifications: Variable no-load speed 0-25,000 RPM, 3.95 lbs. tool wt., 10.3 lbs. shipping wt.

SPECIAL PRICE Call

2” 2-SpeedMagneticDrill PressDWE1622K

10-amp motor with overload protection. Quick Change Chuck system allows tool free change between 3/4” Weldon Shank and 1/2” keyed chuck. Handle and coolant bottle can be placed on either side of tool.

Standard equipment: Magnetic coolant tank, 1/2” keyed chuck, safety chain, adjustment tools, kit box.

Specifications: 10-amp motor (120V, AC only), 300 or 450 RPM no-load speed, 1/2” twist bit or 2” annular cutter capacity. 43/8” length of travel.


14” Diamond EdgeChop Saw Blade

DW8500Diamond Edge provides 100 times the life versus the standard DeWalt chop saw wheel. Advanced brazing technology cuts metal with the speed of a conventional abrasive blade. Steel blade core pro-vides constant cutting depth, capacity and stability of a solid core and the exposed diamond matrix allows the blade to cut concrete, plastic, fiberglass, rubber, non-ferrous metals and other soft materials without loading. 1” arbor.

SPECIAL PRICE Call

14” Chop Saw

D28715

Large cutting capacity: 5” round, 41/2” x 61/2” rect-angle. Quick-Change keyless blade change sys-tem. 45° adjustable fence. Adjustable spark guard. Quick-lock vise.

Standard equipment: Abrasive wheel, fence wrench, and tool free flange system.

Specifications: 15-amps (120V, AC/DC), 4,000 RPM no-load speed, 5.5 HP motor, 1” arbor, 39 lbs. tool wt., 44 lbs. shipping wt.


14” Chop SawD28710

Cutting capacity: 5” round, 4” x 75/8” rectangular. 45° pivoting fence for fast and accurate angle cuts. Spindle lock. Quick-lock vise allows fast clamping of material.

Standard equipment: Abrasive wheel and wrench.

Specifications: 15-amps (120V, AC/DC), 3,800 RPM no-load speed, 4.0 HP motor, 1” arbor, 37 lbs. tool wt., 45 lbs. shipping wt.

SPECIAL PRICE Call

14” MetalCutting SawDW872

Plus, FREE 41/2” grinder either DWE4120N (paddle switch without lock-on) or DWE4120 (paddle switch with lock-on).

Cuts pipe, rod, Uni-Strut™, angle iron and more. 14” 70 tooth blade provides virtually burr-free cuts. 45° tool-free pivoting fence. Designed for use with Slasher blades.

Standard equipment: 14” carbide blade, wrench and ver-tical clamp.

Specifications: 15-amps (120V, AC/DC), 1,300 RPM no-load speed, 4.0 HP motor, 1” arbor, 47 lbs. tool wt.


FOR BLADES, SEE PAGE 44

DWE4997NVS


Belt SanderNo. 352VS – 3” x 21”Variable speed. Designed for flush sanding up to vertical surfaces. Dust bag swivels 360°. Fingertip belt-tracking knob. Quick release belt-change lever. Includes sanding belt and dust bag assembly. (We stock sanding belts).

Specifications: 8-amps, (120V, AC only), 850-1,300 SFPM VS, 10.8 lbs. tool wt.

SPECIAL PRICE Call

20V MAX* Jig SawDCS331BBare tool only. Keyless blade clamp. Keyless shoe bevel with detents at 0°, 15°, 30° and 45° for easy bevel cutting. 4-position orbital action. Adjustable dust blower. Two T-shank blades included. Battery and charger sold separately.

Specifications: 0-3,000 SPM, 1” stroke length, tool weight 6.8 lbs.


11/4 HP Variable Speed RouterDWP61111/2” plunge stroke. Fixed base. 12 position spindle lock. LED light.

Standard Equipment: 1/4” collet chuck, wrench.

Specifications: 7-amps (120V, AC only), 11/4 HP, 16,000-27,000 RPM no-load speed, 1/4” collet diam-eter, 4.6 lbs. tool wt., 5.5 lbs. shipping wt.

SPECIAL PRICE Call

10”Jobsite Table SawDWE7491RS321/2” rip capacity. Rolling stand designed for easy set up and breakdown. 30° miter right and left, 0-45° bevel left. Telescoping fence. Dust collec-tion port. Includes 10” 24-tooth blade, two blade wrenches, blade guard, rip fence, miter gauge, rolling stand.

Capacities: 31/8” depth of cut at 90° and 21/4” at 45°.

Specifications: 15.0-amps (120V, AC only), 4,800 RPM no-load speed, 5/8” arbor, 90 lbs. tool wt., 110 lbs. shipping wt.

SPECIAL PRICE Call

PRAZIBEAM CUTTER

#PR-2700 12” cutting capacity – $195Fits 99% of all 71/4” circular saws

#PR-7000 12” cutting capacity – $195Fits SKIL or BOSCH 71/4” and 81/4” worm drive saws#PR-8000 18” cutting capacity – $295Fits SKIL, BOSCH, MAKITA and DEWALT 71/4”

and 81/2” worm drive sawsSAWS NOT INCLUDED

12” Sliding Compound Miter SawDWS70960° miter right and 50° left with 13 positive stops, 0-49° bevel left and right.

Capacities: 90° cross-cut and 45° bevel: 2” x 10”; at 45° miter: 4.5” x 6.8”; 8” crown molding laying flat.

Specifications: 15.0-amps (120V, AC only), 3,800RPM no-load speed, 5/8” or 1” arbor, 51 lbs. tool wt.

SPECIAL PRICE $449MITER SAW STAND (DWX723) Call

ROLLING SAW STAND (DWX726) $179

12” Double Bevel SlidingCompound Miter SawDHS790AT2Cordless or corded (with adapter). Miters 60° right and 50° left. Bevels 49° left and right. Dust collec-tion system. Cutline™ LED light. Includes two 60V MAX* 6.0 A-H batteries (DCB606), 120V AC power adapter, carbide blade, blade wrench, dust bag.

Capacities: at 90° cross-cut and 45° bevel: 2” x 16” with back fence; at 45° miter: 4” x 8”; 71/2” crown molding.

Specifications: Two 60V MAX* batteries or 15.0-amps (120V, AC only) w/adapter, 3,800 RPM no-load speed, 1” arbor, 56 lbs. tool wt., 78 lbs. shipping wt.

SPECIAL PRICE Call

12” Double BevelCompound Miter SawDHS716AT2Cordless or corded. Kit includes two 60V MAX* 6.0 A-H batteries (DCB606), dual port charger, 120 AC power adapter, carbide blade, blade wrench, dust bag.

Capacities: 50° miter left and right, 48° bevel left and right. 90° cross-cut and 45° bevel: 2” x 10” with back fence; at 45° miter: 4” x 6”; 65/8” crown molding.

Specifications: Two 60V MAX* batteries or 15.0-amps (120V, AC only) w/adapter, 3,800 RPM no-load speed, 5/8” arbor, 44 lbs. tool wt., 64 lbs. shipping wt.

SPECIAL PRICE $599**While supplies last

20V MAX* 71/4” SlidingMiter SawDCS361M1

Miters 48° right and left with 11 positive stops. Bevels 48° to the left and 3° to the right. Includes 20V MAX* battery (DCB204), charger (DCB112), 71/4” carbide blade, blade wrench, material clamp, LED light, and dust bag.

Capacities: at 90° cross-cut: 2”x8”; at 45° bevel: 1.5”x8”; at 45° miter: 2” max height and 5.5” max width; 35/8” crown molding.

Specifications: 20V MAX*, 3,750 RPM no-load speed, 5/8” arbor, 31.6 lbs. tool wt, 38.1 lbs shipping wt.

SPECIAL PRICE Call

12” Double Bevel CompoundMiter Saw, DW716

0-48° bevel left and right with bevel stops at 0°, 33.9°, 45° and 48° each way. Precision miters 0-50° left and right with 11 positive stops. Includes carbide blade, blade wrench and dust bag.

Capacities: at 90° cross-cut and at 45° left and right bevel: 2” x 10” with back fence; at 45° miter: 4” x 6” (max height), 2” x 8” (max width); 61/2” crown molding lying flat.

Specifications: 15-amps (120V, AC only), 3,600 RPM no-load, 5/8” or 1” arbor, 44 lbs. tool wt., 49 lbs. shipping wt.

SPECIAL PRICE CallMITER SAW STAND (DWX723) Call

ROLLING SAW STAND (DWX726) Call

12” Compound Miter SawDW715

Precision miters 0-50° left and right with 11 posi-tive stops. Bevels 0-48° to the left and 0-3° to the right with bevel stops at 0°, 33.9°, 45° and 48°. Includes carbide blade, blade wrench, extension kit, and dust bag.

Capacities: at 90° cross-cut: 4” x 6” (max height), 2” x 8” (max width); at 45° bevel: 2” x 8”, at 45° miter: 4” x 4” (max height), 2” x 6” (max width); 61/2” crown molding lying flat.

Specifications: 15-amps (120V, AC only), 4,000 RPM no-load speed, 5/8” or 1” arbor, 42 lbs. tool wt., 49 lbs. shipping wt.

SPECIAL PRICE $27910” COMPOUND MITER SAW (DW713) Call

MITER SAW STAND (DWX723) CallROLLING SAW STAND (DWX726) Call

12” Double BevelSliding Compound Miter SawDWS780

Cross cut positioning system provides better accu-racy and visibility of cut line. Miters 60° to the right and 50° to the left with 10 positive stops. Dust collection system. Includes carbide blade, blade wrench, dust bag, vertical material clamp.

Capacities: at 90° cross-cut and 45° bevel: 2” x 16” with back fence; at 45° miter: 2” x 12”; 71/2” crown molding.

Specifications: 15-amps (120V, AC only), 3,800 RPM no-load speed, 5/8” or 1” arbor, 56 lbs. tool wt., 66 lbs. shipping wt.

SPECIAL PRICE CallMITER SAW STAND (DWX723) Call

ROLLING SAW STAND (DWX726) Call

WOOD WORKING

CALL 800-821-5448 OR FAX 800-844-1199

18V 7-Piece Combo KitNo. 2997-27Standard equipment: 2804 hammer drill/driver, 2853 1/4” hex impacting screwdriver, 2720 sawzall, 2730 61/2” circ saw, 2861 1/2” sq dr impact wrench, 2780 41/2” grinder, 2735 work light, two 18V (5.0 A-H) batteries (48-11-1850), charger (48-59-1812), 2 contractor bags. 44 lbs. shipping wt.


M18 Fuel 4-Pack Combo KitNo. 2896-24Standard equipment: 2704 1/2” hammer drill/driver with 1,200 in-lbs peak torque, 0-550/0-2,000 RPM, 0-32,000 BPM, LED light, 7.75” long AND

2720 Sawzall 0-3,000 SPM, 11/8” stroke, keyless adjustable shoe and blade clamp, 173/4” long, 7.4 lbs. AND

2753 1/4” hex impacting screwdriver 0-3,000 RPM, 1,800 in-lbs. max torque 0-3,700 IPM, LED light, 5.25” long AND

2735 LED light 135° rotating head with TWO 18V (5.0 A-H) Redlithium™ XC batteries (48-11-1850), charger (48-59-1812), contractor bag, 23.6 lbs. shipping wt.


18V 4-Pack Combo KitNo. 2694-24M18 batteries have a built-in fuel gauge.

Standard equipment: 2602 1/2” hammerdrill/drill with 525 in-lbs. max torque, 0-450 or 0-1,700 RPM VSR, 0-29,000 BPM, LED light, 81/2” tool length, 4.4 lbs. tool wt AND 2620 Sawzall, 0-3,200 SPM, 1” stroke, up to 30 cuts of 2” x 12” lumber per charge, 173/4” long, 7.9 lbs. tool wt. AND 2630 61/2” circular saw, 3,500 RPM, 5/8” arbor, 21/8” cutting capacity @ 90° and 15/8” @ 45°, 50° bevel capacity, electric brake, 8.5 lbs. tool wt AND 49-24-0171 flashlight, two 18V XC (3.0 A-H) batteries (48-11-1828), charger (48-59-1801), blades, contractor bag. 29.3 lbs. shipping wt.

SPECIAL PRICE Call

CLOSEOUTBLOWOUT!!!

18V Combo Kit No. 2997-22Standard equipment: 2804 1/2” hammer drill/driv-er, brushless motor, 1,200 in-lbs. of peak torque, 0-550/0-2,000 RPM, LED light, 6.9” long, 3.2 lbs. 2853 1/4” hex impacting screwdriver with 2,000 in-lbs. max torque, 4 speeds: 0-1,900/0-2,800/0-3,600/ or “self-tapping mode”, 0-4,300 IPM, LED light, 4.6” long, 2.2 lbs., two 18V (5.0 A-H) Redlithium™ XC batteries (48-11-1850), charger (48-59-1812), carrying case. 19.9 lbs. shipping wt.

SPECIAL PRICE Call

18V Combo Kit No. 2897-22POIncludes a FREE 22” wide packout tray (48-22-8424) – a $75 value, AND a FREE 5.0 A-H battery (48-11-1850) – a $89 value. While supply lasts.

FREE 40-pc impacting screwdriver accessory kit (ME40) – a $35 value.

Standard equipment: 2704 1/2” hammer drill/driver with 1,200 in-lbs. peak torque, 0-550/0-2,000 RPM, 0-32,000 BPM, LED light, 7.75” long. 2753 1/4” hex impacting screwdriver, one-speed 0-3,000 RPM, 1,800 in-lbs max torque, 0-3,700 IPM, LED light, 5.25” long. Two 18V (5.0 A-H) Redlithium™ XC batteries (48-11-1850), charger (48-59-1812), carrying case. 21 lbs. shipping wt.


2897-22 $349

18V Combo Kit

No. 2796-22POThis ultra-premium kit includes 3 tools that are Milwaukee’s highest quality AND FREE PACKOUT rolling tool box (48-22-8426) - a $150 value AND a FREE 5.0 A-H 3rd

battery (48-11-1850) - a $89 value AND a FREE 2721 FUEL with ONE-KEY sawzall, brushless motor, 0-3,000 SPM, 11/8” stroke length, 173/4” long, 7.4 lbs. - a $225 value AND a FREE 40-piece bit set (48-32-4006) - a $35 value. While supply lasts.

Standard equipment: 2706 FUEL with ONE-KEY 1/2” hammer drill/driver, brushless motor, 1,200 in-lbs. peak torque, 0-550 or 0-2,000 RPM, 32,000 BPM, 7.6” long, 3.4 lbs. 2757 FUEL with ONE-KEY 1/4” hex impacting screwdriver, brushless motor, 0-3,000 RPM, 0-1,800 in-lbs. max torque, 0-3,700 IPM, 51/4” long, 2.1 lbs. Two 18V (5.0 A-H) batteries (48-11-1850), charger (48-59-1812). 50 lbs. shipping wt.


16”

22” 18”

$499 of FREE

goods!Crazy Blowout

Only 344 Available

18V Compact Combo KitNo. 2691-22FREE 3rd battery, 18V 2.0 A-H (48-11-1820) - $71 value. Fuel gauge on all M18 batteries. Both tools have a built-in LED light.

Standard equipment: 2606 1/2” compact drill with 500 in-lbs. max torque, 0-400 or 0-1,800 RPM VSR, 1/2” ratcheting single-sleeve chuck, 21 clutch settings, 71/4” tool length, 2.9 lbs. tool wt. AND 2656 1/4” hex impacting screwdriver with 1,500 in-lbs. max torque, 0-2,750 RPM VSR, 0-3,450 IPM, 51/2” tool length, 3.1 lbs. tool wt, two 18V (1.5 A-H) batteries (48-11-1815), charger (48-59-1812), carrying case. 14 lbs. shipping wt.

SPECIAL PRICE Call

For every cordless Milwaukee tool purchased, kit &/or bare tool, you may purchase 1 of:48-11-1852 (a 2-pak of 18V 5.0 A-H batteries) for $88

-OR-48-59-1850P starter kit (a 2-pak of 18V 5.0 A-H batteries, a char-ger 48-59-1812 and a canvas contractor bag) for $138.

Battery Bonanza

Part # Battery Price48-11-2402 12V (3.0 A-H) $ 6248-11-2440 12V (4.0 A-H) Call48-11-2460 12V XC (6.0 A-H) Call48-11-1820 18V (2.0 A-H) Call48-11-1828 M18 XC (3.0 A-H) 5948-11-1840 18V (4.0 A-H) Call48-11-1850 18V (5.0 A-H) 8948-59-1850P Two 18V (5.0 A-H) batteries, Call #1812 charger & canvas bag48-11-1880 18V (8.0 A-H) Call48-11-1890 18V (9.0 A-H) Call 48-11-2830 M28 (2.8 A-H) 149 Part # Charger Price

48-59-2401 M12 Charger Call48-59-1812 M12/M18 Charger Call48-59-1808 M12/M18 Fast Charger Call48-59-1806 M18 6-Bay Charger Call48-59-1807 Multi-bay Charger Call

Batteries & Chargers18V Combo Kit

No. 2799-22CXPOKit includes a FREE jobsite cooler (48-22-8250) with a food grade leak proof liner to keep ice cold for 24 hours without leak-ing. Holds 21.65 liquid quarts - a $65 value AND a FREE 5.0 A-H 3rd battery (48-11-1850) $89 value. While supply lasts.

Standard equipment: 2702 compact brushless 1/2” hammer drill/driver, 500 in-lbs. max torque, 0-450 or 0-1,800 RPM, 73/8” long. 2750 1/4” hex brushless impacting screwdriver, 0-2,800 RPM, 1,500 in-lbs. max torque, 0-3,600 IPM, 53/8” length, two 18V batteries (One 2.0 A-H & one 4.0 A-H batteries), charger (48-59-1812). 14 lbs. shipping wt.


F R E E 4 0 - p i e c e impact ing screw-driver accessory kit (48-32-4006)–a $35 value.

$189 of FREE goods!

Crazy BlowoutOnly 626 Available


18V Fuel1/4” HexImpacting ScrewdriverNo. 2853-22Standard equipment: Two 18V 5.0 A-H Redlith-ium™ XC batteries (48-11-1850) charger (48-59-1812), belt clip, bit holder, carrying case.

Specifications: 0-3,600 RPM, 0-4,300 IPM, 0-2,000 in-lbs. torque, 3.9 lbs. tool wt. with battery, 12.39 lbs. shipping wt.

SPECIAL PRICE Call

1/2” Sq Dr High TorqueImpact WrenchNo. 2767-22Delivers 1,000 ft-lbs. of fastening torque & 1,400 ft-lbs. of break away torque. Friction ring kit.

Standard equipment: Two 18V (5.0 A-H) Redlith-ium™ XC batteries (48-11-1850), charger (48-59-1808), carrying case.

Specifications: 4-modes: 0-950/0-1,500/0-1,800 or 1,800-750 RPM. IPM: 950/1,750/2,100/2,100, 1,000 ft-lbs. torque, 1,400 ft-lbs. break away torque, 5.9 lbs. tool wt., 15.6 lbs. shipping wt.

SPECIAL PRICE Call

1/2” Sq Dr High TorqueImpact Wrench No. 2766-22Delivers up to 750 ft-lbs. of fastening torque & 1,100 ft-lbs. of break away torque. Detent pin.


Specifications: 4-modes: 0-950/0-1,500/0-1,800 or 1,800-750 RPM. IPM: 1,150/2,100/2,400/2,400, 750 ft-lbs. max torque, 5.5 lbs. tool wt., shipping wt. 15 lbs.

SPECIAL PRICE Call

18V Fuel™1/2” Sq DrImpact WrenchNo. 2759-22INTEGRATED TOOL TRACKING Brushless motor. Fuel™ ONE-KEY™. With detent pin retention system.

Standard equipment: Two 18V 5.0 A-H Redlithi-um™ XC batteries (48-11-1850), charger (48-59-1812), belt clip, carrying case.

Specifications: 0-2,500 RPM, 0-3,200 IPM, 0-220 ft-lbs. max torque, 4.1 lbs. tool wt., 11.6 lbs ship-ping wt.

SPECIAL PRICE Call

1/2” Impact WrenchNo. 9070-20Detent pin socket retention. Strictly limited to stock on hand.

Specifications: 7-amps (120V, AC/DC), 1,800 RPM no-load VSR, 2,600 IPM, 300 ft-lbs. max torque, 6.0 lbs. tool wt., 7.3 lbs. shipping wt.

SPECIAL PRICE Call3/4” SQ. DR. (9075-20) ADD $100

18V 1/2” Sq Dr Impact WrenchNo. 2860-22

Delivers 450 ft-lbs. fastening torque & 600 ft-lbs. break away torque. Detent pin retention system.


Specifications: 0-1,700 or 0-2,100 or 0-2,400 RPM with 2,300 or 2,700 or 3,000 IPM, 450 ft-lbs. fastening torque & 600 ft-lbs. of break away torque, 5.3 lbs. with battery, 13.3 lbs. shipping wt.

SPECIAL PRICE Call

18V 1/2” Sq Dr Impact WrenchNo. 2755-22

Brushless motor. 210 ft-lbs. of torque. Detent pin.


Specifications: 0-2,400 RPM no-load VSR, 0-3,100 IPM, 210 ft-lbs. max torque, 6” long, 3.9 lbs. tool wt., 10.5 lbs. shipping wt.

SPECIAL PRICE Call

18V Caulking GunNo. 2641-21CTDispenses 10 oz. caulk tubes. To dispense 20 oz. sausage packs (only) then order 2642-21CT. To dispense 30 oz. quart tubes then order #1095 con-version kit for $45 and attach this kit to either caulk gun below.

Standard equipment: One 18V Redlithium™ bat-tery (48-11-1815), charger.

Specifications: 6 setting dial speed, variable speed, 0-21 IPM, 950 lbs. of pushing force, expels 220 tubes per charge, 5.8 lbs. tool wt., 6.4 lbs.shipping wt.

10 oz. Tubes 20 oz. Sausage Packs 2641-21CT 2642-21CTSPECIAL PRICE Call Call

18V 3/8” Sq Dr Impact WrenchNo. 2754-22Brushless motor. 210 ft-lbs. of torque. Friction ring.


Specifications: 0-2,500 RPM no-load VSR, 0-3,200 IPM, 210 ft-lbs. max torque, 6” long, 2.4 lbs. tool wt., 10.5 lbs. shipping wt.

SPECIAL PRICE Call

18V BARE TOOL FREE 5.0 A-H Battery 48-11-1850 ($89 Value) with each bare tool below, in this

box. While supply lasts.

2713-20 1” SDS Hammer Call2719-20 Hackzall Call2720-20 Sawzall Call2729-20 Band Saw Call2766-20 1/2” Sq Dr Impact Detent Pin Call2767-20 1/2” Sq Dr Impact Hog Ring Call2780-20 41/2” Grinder Call2782-20 53/8” Metal Cutting Circ Saw Call2783-20 41/2” Grinder Call2853-20 1/4” Hex Impacting Screwdriver Call2860-20 1/2” Sq Dr Impact Detent Pin Call2861-20 1/2” Sq Dr Friction Ring Call2862-20 1/2” Sq Dr Impact Detent Pin Call

18V BARE TOOL

0880-20 Wet/Dry Vac Call0884-20 Blower Call2550-20 Rivet Tool (12V!) Call2606-20 Compact Drill Call2607-20 Hammer Drill Call2621-20 Sawzall Call2625-20 Hackzall Call2629-20 353/8” Bandsaw Call2635-20 18 Ga. Shear Call2646-20 Grease Gun Call2659-20 1/2” Sq Dr Impact Call2704-20 FUEL Hammer Drill $1192754-20 FUEL 3/8” Sq Dr Impact Call2755-20 FUEL 1/2” Sq Dr Impact Call2762-20 FUEL 1/2” Sq Dr Impact 159

18V 1” Sq DrImpact WrenchNo. 2867-22Friction ring retention system delivers up to 1,500 ft-lbs. of fastening torque and up to 1,800 ft-lbs. of break away torque. At only 12.9 lbs. with battery, this tool is much lighter than corded units and it provides significantly more torque.

Standard equipment: Two 18V (8.0 A-H) XC bat-teries (48-11-1880), charger (48-59-1808), 270° adjustable side handle, lanyard loop, contractor bag.

Specif icat ions: 4-modes: 0-450/0-900/0-1,350/1,800 RPM, IPM: 1,330/1,620/2,100/2,450, 1,500 ft-lbs. torque, 1,800 ft-lbs. break away torque, 12.9 lbs. tool wt. with battery, 20.5 lbs. shipping wt.

SPECIAL PRICE Call

CALL 800-821-5448 OR FAX 800-844-1199

16 Gauge NibblerNo. 6890

AC/DC paddle switch. Cutter can be set in 8-positions.

Specifications: 3.8-amps (120V, AC/DC), 1,900 SPM, 13/4” smallest cutting radius, cutting capacity: 16 ga. steel, 18 ga. stainless, 4.8 lbs. tool wt., 6.2 lbs. shipping wt.


6+ MIX OR MATCH $54810 Gauge Nibbler (6880) Call

18 Gauge ShearNo. 2635-22Cut straight or contour lines in up to 18 ga. flat metal. NOT for use on corrugated metal.

Standard equipment: Two 18V (3.0 A-H) Redlithium™ XC batteries (48-11-1828), charger (48-59-1812), carrying case.

Specifications: 2,500 SPM, 3.9 lbs. tool wt., 10.9 lbs. shipping wt.

SPECIAL PRICE CallREPLACEMENT BLADE SET CONTAINS ALLTHREE BLADES AND A SPACER BUSHING

1-5 $53.95 6+ $49.70

18 Gauge Shear No. 6852-20Cut straight or contour lines in up to 18 ga. flat metal. NOT for use on corrugated metal.

Specifications: 6.8-amps (120V, AC only), 0-2,500 SPM, 4.1 lbs. tool wt., 5.12 lbs. shipping wt.

SPECIAL PRICE Call REPLACEMENT BLADE SET CONTAINS ALLTHREE BLADES AND A SPACER BUSHING

1-5 $53.95 6+ $49.70

18V 13/4” SDS-MAXHammer No. 2718-21HD8.1 ft-lbs. of impact force. One-Key™. Autostop™ electromagnetic clutch that prevents rotation in case the tool gets bound up when drilling in rebar or hard aggregate.

Standard equipment: One 18V 12.0 A-H battery (48-11-1812), rapid charger (48-59-1808), side handle, grease tube, carrying case.

Specifications: 380 RPM, 2,900 BPM, 8.1 ft-lbs. impact energy, 19.7 lbs. tool wt., 38.06 lbs. ship-ping wt.

SPECIAL PRICE Call

18V

11/8” SDS HammerWith DE Kit No. 2715-22DEDedicated Dust Extractor (2715-DE) delivers OSHA Table 1 Compliance. 3.3 ft-lbs blow energy. 3-modes of operation. AVS anti-vibration system. Powerstate™ brushless motor.

Standard equipment: Two 18V 5.0 A-H batter-ies (48-11-1850), charger (48-59-1812), depth rod, side handle, Dust Extractor (2715-DE), HEPA Filter, nozzles, carrying case.

Specifications: 0-1,350 RPM, 0-5,000 BPM, 3.3 ft-lbs. blow energy, 7.7 lbs. tool wt., 27.76 lbs. shipping wt.

SPECIAL PRICE Call

Dust ExtractorNo. 2715-DEHAMMERVAC™ dedicated dust extractor features an inline dedicated design engineered to connect directly to & be powered by the 11/8” SDS 2715 hammer (pictured at left).

Specifications: 12” tall, 4.5” long, 15.5” wide, achieves OSHA Table 1 Compliance, 4.7 lbs. tool wt.


18V

11/8” SDS HammerNo. 2715-223.3 ft-lbs blow energy. 3-modes of operation. AVS anti-vibration system. Powerstate™ brushless motor.

Standard equipment: Two 18V 5.0 A-H batteries (48-11-1850), charger (48-59-1812), depth rod, side handle, carrying case.

Specifications: 0-1,350 RPM, 0-5,000 BPM, 3.3 ft-lbs. blow energy, 7.7 lbs. tool wt., 20.44 lbs. shipping wt.

SPECIAL PRICE Call

M18 1” SDS RotaryHammer “High Demand”No. 2713-22HDMilwaukee offers tools that they designate “High Demand”, with an “HD” at the end of the part #. The only distinction is that these HD tools come standard with 9.0 A-H or 12.0 A-H batteries & a fast charger. The tools are the exact same if the 4-digit prefix part # is the same. 3 modes of operation.

Standard equipment: Two 18V 9.0 A-H batteries (48-11-1890), charger (48-59-1808), carrying case.

Specifications: 0-1,500 RPM, 0-4,400 BPM, 2.1 ft-lbs. blow energy, 6.0 lbs. tool wt., 22.1 lbs. ship-ping wt.

SPECIAL PRICE Call

19/16” Spline Rotary HammerNo. 5316-215.5 ft-lbs. (7.5J) of impact force. CPT - Constant Power Technology. Mechanical clutch. 2-modes: rotary hammer and hammer only.

Standard equipment: Side handle and hard car-rying case.

Specifications: 10.5-amps (120V, AC only), 450 RPM, 3,000 BPM, 5.5 ft-lbs. impact energy, 22.85 lbs. shipping wt.

SPECIAL PRICE CallSDS-MAX (5317-21) SUBTRACT $10

11/8” SDS Rotary HammerNo. 5268-21Variable position chisel stop. 3.6 ft-lbs of impact force. Mechanical clutch. 3-modes: rotary hammer, hammer only, drill only.

Standard equipment: Depth rod, side handle, carrying case.

Specifications: 8.0-amps (120V, AC only), 0-1,500 RPM no-load, 0-5,500 BPM, 7.5 lbs. tool wt., 13.1 lbs. shipping wt.

SPECIAL PRICE Call

1/2” HammerdrillNo. 5378-21Can operate in drill only mode or drill & hammer.

Standard equipment: Chuck key, depth gauge, side handle, case.

Specifications: 7.5-amps (120V, AC only), 0-1,350 or 0-2,500 RPM no-load VSR,0-20,000 or 0-40,000 BPM, 6.0 lbs. tool wt., 10 lbs. ship-ping wt.


6+ MIX OR MATCH $129.855378-20 (no case)

Strictly limited to stock on hand $109

1/2” Hammer Drill/Driver KitNo. 2704-22POWERSTATE™ brushless motor. 1/2” metal, sin-gle sleeve chuck.

Standard equipment: Two 18V 5.0 A-H batteries (48-11-1850), charger (48-59-1812), carrying case.

Specifications: 0-550/0-2,000 RPM, 32,000 BPM, 1,200 in-lbs. peak torque, 3.5 lbs. tool wt., 13.9 lbs. shipping wt.


Tool only (2704-20) $119

CLOSOUTBLOWOUT!ONLY 148

UNITS LEFT


SPECIAL PRICE CallSAME BUT NO CASE (6370-20) SUBTRACT $9

Metal Cutting 8”Circular SawNo. 6370-21

Cuts up to 3/4” thick steel plate. Not for use on hardened steel. For blades, see box at left.

Standard equipment: 42T 8” metal cutting blade (#8515), hex wrench, carrying case.

Specifications: 15-amps (120V, AC only), 3,700 RPM no-load speed, 5/8” arbor, 29/16” max depth cut, 13.7 lbs. tool wt., 25.3 lbs. shipping weight.

8” Metal Cutting Blades Use with 8” metal cutting circular saw No. 6370 pictured right.

P/N TEETH* APPLICATION 1-4 5+

8515 42 3/32” to 3/4” $52 $47SL848 48 24 Ga. to 1/8” 52 478520 50 24 Ga. to 3/32” 59 53SL860A 60 Aluminum 76 69

*42T & 50T blade are Milwaukee brand. 48T and 60T blades are Slasher brand.

M18 Dual Bevel SlidingCompound 10” Miter SawNo. 2734-21HDTall sliding/removable fences to support large base & crown against the fence. Dual bevel with 9 detents. Brushless motor.

Standard equipment: One 18V 9.0 A-H battery (48-11-1890), charger (48-59-1808), carbide blade, dust bag, wrench.

Specifications: 4,000 RPM, 5/8” arbor, up to 300 cuts/charge of 2x4” or 150 cuts of 2x10”, capaci-ties: 90° cross-cut 2x12”, 45° miter 2x8”, 45° bevel 2x12”, vertical (against fence) 53/4”, vertical (nested crown) 51/4”, miters 50° left & 60° right, bevel cap 48° left & right, 45 lbs. tool wt., 58 lbs. shipping wt.

SPECIAL PRICE Call

8” Metal CuttingCirc SawNo. 2982-21

C u t s 1 2 0 ’ o f s t e e l decking or 100 cuts of 2x2x1/4” angle iron per charge. Can cut up to 1” thick steel plate. Not for use on hardened steel. Chip collector.

Standard equipment: One 18V XC 8.0 A-H battery (48-11-1880), charger (48-59-1808), 8” 42T blade (48-40-4515), contractor bag.

Specifications: 4,000 RPM, 5/8” arbor, 29/16” max depth cut, 12.1 lbs. tool wt., 22.2 lbs. shipping wt.



101/4” Circular SawNo. 6470-21Can cut 4” board in a single pass with its 313/16” cutting capacity. Aircraft aluminum shoe won’t warp and is extremely light. Electric brake.

Standard equipment: Rip fence, steel carrying case.

Specifications: 15.0-amps (120V, AC only) 5,200 RPM no-load, 5/8” arbor, 3.1 peak HP, 60° bevel capacity, max cut: @ 90° 313/16”, @ 45° 23/4”, at 60° 13/4”, 17.8 lbs. tool wt., 41 lbs. shipping wt.



Tilt-Lok 71/4” Circular Saw, No. 6390-21Exclusive adjustable main handle can be adjusted to the work or to the users most comfortable work position. Padded handles. Magnesium upper and lower guard.

Standard equipment: Framing/rip carbide blade, hex blade wrench, carrying case.

Specifications: 15-amps (120V, AC/DC), 5,800 RPM no-load, 5/8” arbor, 3.25 peak HP, 50° bevel capacity, 10.4 lbs. tool wt., 18.1 lbs. shipping wt.

SPECIAL PRICE Call

12V Rivet Tool KitNo. 2550-22Only on the 2550-22, you will receive a FREE 12V 3.0 A-H battery (48-11-2402) - a $62 value.

With 2,000 lbs. of pulling force, this rivet tool can pull up to 3/16” stainless rivets. Once the mandrel is inserted into the tool, the tool will “hold” the rivet in any position - hands free. “Spent mandrel collector” on rear of tool.

Standard equipment: Two 12V 1.5 A-H bat-teries (48-11-2401), charger (48-59-2401), 4 silicone nose pieces: 3/32”, 1/8”, 5/32”, 3/16” & carry-ing case.

Specifications: 2,000 lbs. of pulling force, 0.8” stroke length. On a single charge with a 1.5 A-H battery, this tool pulls 450 1/8” steel rivets or 250 3/16” stainless rivets. 4.2 lbs. tool wt., 8 lbs. ship-ping wt.

REGULAR PRICE $585SPECIAL PRICE $3292550-20 (bare tool) Call

12V 3.0 A-H Battery (2402) $62Jaw Kit (0035) $14.95

4 Silicone Nose Pieces (0100) $34.30Mandrel Tube (2560) $1.99

#2402Adjustable TorqueSelf-Drilling ScrewdriverNo. 6780-20H See pages 4 and 5 for an additional 12 screw guns H

Specifications: 6.5-amps (120V, AC only), 0-2,500 RPM no-load VSR, max torque 140 in.-lbs., 3.8 lbs. tool wt., 4.9 lbs. shipping wt.





Battery Bonanza

CALL 800-821-5448 OR FAX 800-844-1199

11/2” Magnetic Drill PressNo. 2787-22HDBy utilizing permanent magnets, the magnetic base operates without electricity; ensuring that the magnet does not deactivate if the battery is drained. Equipped with auto-stop lift-off detection, power to the motor is automatically cut if excess rotational motion is detected while drilling.

Standard equipment: Two 18V 9.0 A-H batteries (48-11-1890), charger (48-59-1808), 3/4” weldon to 1/2” chuck adapter, plastic case.

Specifications: 11/2” hole capacity, permanent magnets, 2” depth capacity, 29.5 lbs. tool wt., 59.9 lbs. shipping wt.

SPECIAL PRICE Call

18V 9” Cut-Off SawNo. 2786-22HDONE-KEY™ integrated so you can wirelessly con-nect the tool with your smartphone to track and manage the tool. RAPIDSTOP™ blade brake. Onboard water connection; quick-connect.

Standard equipment: Two 18V (12.0 A-H) batter-ies (48-11-1812), charger (48-59-1808), diamond wheel, abrasive wheel, 2 wrenches, adjustable guard.

Specifications: 6,600 RPM, 7/8” arbor, 3.4” max cut depth, 10.6 lbs. bare tool wt., 18.5 lbs. ship-ping wt.

SPECIAL PRICE Call

18V 4-Gal BackpackWater Supply KitNo. 2820-21WSSWITCH TANK™ 4-gallon back-pack water supply kit is designed to meet your water supply needs for concrete cutting & coring. This bat-tery powered unit delivers instant, constant & adjustable pressure up to 60 PSI. 5-mode pressure regula-tor adjusts pressure between 20-60 PSI. 3.0 A-H battery provides up to 12 tanks of water delivery per charge. Dual diaphragm pump for increased durability & longer pump life. Wide mouth opening for easy pouring with strainer to filter debris. The isolated pump, hose & quick-connect design allows you to add on tank assemblies for different applications, eliminating cross-chemical contamination. OSHA Table 1 Compliant when concrete cutting and coring.

Standard equipment: Concrete sprayer (49-16-28CS), 4-gal sprayer (49-16-28PS), one 18V (3.0 A-H) battery (48-11-1828), charger (48-59-1812), 10’ hose with quick-connect, nozzle with quick-connect.

15.9 lbs. tool wt. (empty), 18.5 lbs. shipping wt.

SPECIAL PRICE $399

14” Cut-Off MachineNo. 6185-2020-amp overload protection switch: trips the tool, not a remote breaker, for greater convenience and minimal downtime. Blade rotation carries sparks and debris toward the operator reduces the chance of jamming or kickback. This downward or pulling rotation also allows your line of sight to remain clear of dust and debris. This blade rotation is nor-mally just found on gas powered demolition saws.

Standard equipment: Allen wrench, top flange, back flange, flange nuts.

Specifications: 15-amps (120V, AC/DC), 4,600 RPM no-load, 4.8 HP motor, 14” wheel, 1” arbor. 47/16” max cutting depth, 191/4” long, 27.3 lbs. tool wt., 28.1 lbs. shipping wt.


18V 1/4” Die GrinderNo. 2784-22Up to 25 minutes of grinding per charge with 5.0 A-H battery. Brushless motor.

Standard equipment: Two 18V (5.0 A-H) Li-ion batteries (48-11-1850), charger (48-59-1812), 1/4” collet, 2 wrenches, carrying case.

Specifications: 20,000 RPM brushless motor, 1/4” collet, up to 25 minutes of grinding per charge, 3.1 lbs. tool wt., 15 lbs. shipping wt.

SPECIAL PRICE Call

15/8” Die GrinderNo. 5192 or No. 5194Choose toggle switch (5192) or paddle switch (5194). Comes with 1/4” collet but will also accept an 1/8” collet.

Standard equipment: 1/4” collet, 1/2” and 11/16” open end wrenches.

Specifications: 4.5-amps (120V, AC/DC), 21,000 RPM no-load speed, 131/2” long, 4.5 lbs. tool wt., 4.7 lbs. shipping wt.

SPECIAL PRICE Call

18V 7”/9” Angle Grinder(Bare Tool)No. 2785-20Dual action trigger switch eliminates accidental trigger actuation, without lock-on. Provides the power and performance of a 15-amp corded 7”/9” grinder. Tool-free blade changes.

Specifications: 6,600 RPM, 5/8-11 spindle, 10.6 lbs. tool wt., 12 lbs. shipping wt.

SPECIAL PRICE Call

6” GrinderNo. 6161-XXConstant Power Technology™ maintains speed under load. Tool free wheel change. Two models have paddle switch: 6161-30 “with lock on” or 6161-31 “without lock on”. The 6161-33 has slide switch.

Standard equipment: Type-27 guard, side handle, spanner wrench.

Specifications: 13-amps (120V, AC only), 9,000 RPM even under load, 5/8-11 spindle, 5.7 lbs. tool wt., 7.1 lbs. shipping wt.

SPECIAL PRICE Call

18V 41/2”-6” Grinder (Bare Tool)No. 2980-20Paddle switch without lock-on design. It generates the power of a 13-amp corded grinder. Brakes in 3 seconds. 6” grinding capacity. Tool-free blade changes.

Standard equipment: Type-27 guard, wrench, side handle.

Specifications: 9,000 RPM, 5/8-11 spindle, 4.5 lbs. tool wt., 6.7 lbs. shipping wt.



M18 41/2”-5” GrinderNo. 2780-22Paddle switch without lock-on design. This cord-less grinder provides the performance of a corded grinder. Same tool but with a slide switch with lock-on, order 2781-22.

Standard equipment: Two 18V (4.0 A-H) Redlithium™ XC batteries (48-11-1840), char-ger (48-59-1812), wheel guard, spanner wrench, flange nuts, carrying case.

Specifications: 8,500 RPM no-load speed, 5/8-11 spindle, 5.8 lbs. tool wt., 17 lbs. shipping wt.

SPECIAL PRICE Call

41/2” Angle Grinder No. 6141-XXTool free wheel change. Paddle switch. Order 6141-30 for “with lock on” or 6141-31 for “without lock on”.

Standard equipment: Type-27 guard, side handle, spanner wrench.

Specifications: 11-amps (120V, AC only), 12,000 RPM no-load, 5/8-11 spindle, 5.4 lbs. tool wt., 6.95 lbs. shipping wt.

SPECIAL PRICE Call



Battery Bonanza


Portable Band SawNo. 6238-21This band saw is 300/380 SFPM straight speed. LED light, adjustable shoe, 2x more durable com-posite housing, direct drive.

Standard equipment: Case.

Specifications: 11-amps (120V, AC/DC), 300/380 SFPM straight speed, cutting capacity is 5”x5”, 14.5 lbs. tool wt., 21.9 lbs. shipping wt.

SPECIAL PRICE $285MINUS CASE (6238-20) SUBTRACT $20

BLADES: SEE PG 11

Portable Band SawNo. 6232-21This band saw is 0-380 SFPM variable speed with speed dial. CPT - Constant Power Technology. LED light, adjustable shoe, 2x more durable com-posite housing, direct drive.

Standard equipment: Case.

Specifications: 11-amps (120V, AC only), 0-380 SFPM variable speed, cutting capacity is 5”x5”, 14.5 lbs. tool wt., 21.9 lbs. shipping wt.

SPECIAL PRICE CallMINUS CASE (6232-20) SUBTRACT $20

BLADES: SEE PG 11

18V FUEL™ Deep Cut “High Demand” Band SawNo. 2729-22HDMilwaukee offers tools that they designate “High Demand”, with an “HD” at the end of the part #. The only distinction is that these HD tools come standard with 9.0 A-H batteries, & a fast charger. The tools are the exact same if the 4-digit prefix part # is the same.

Standard equipment: Two M18 9.0 A-H batteries (48-11-1890), charger (48-59-1808), blade, case.

Specifications: 0-380 SFPM, uses 447/8” blade, 5”x5” cutting capacity, 15 lbs. tool wt., 36 lbs. shipping wt.

SPECIAL PRICE Call

18V Fuel™ Deep CutBand SawNo. 2729-21Requires 447/8” blades. Cutting capacity 5”x5”.

Standard equipment: One M18 5.0 A-H lithium-ion battery (48-11-1850), charger (48-59-1812), blade, carrying case.

Specifications: 0-380 SFPM, uses 447/8” blade, 5”x5” cutting capacity, 15 lbs. tool wt., 25 lbs. shipping wt.

SPECIAL PRICE Call

18V 353/8” BandsawNo. 2629-22Requires 353/8” blade. Compact size (18x6x12”) and lightweight design (10.25 lbs) is ideal for cut-ting material in tight spaces. Blade ejection sys-tem. LED light. Can make flush cuts to ceiling or wall.

Standard equipment: Two M18 XC (2.8 A-H) lithium-ion batteries (48-11-1828) charger (48-59-1801), one blade, carrying case.

Specifications: 480 SFPM, uses special 353/8” blades, 31/4” x 31/4” cutting capacity, 18x6x12” size, 10.25 lbs. tool wt., 20 lbs. shipping wt.

SPECIAL PRICE Call353/8” blades. Choose 10, 14, 18 or 24 TPI

3 blades/pack. $5.97/blade6242-6 353/8” (electric) Call

53/8” Metal CuttingCirc SawNo. 2782-22Up to 370 cuts in 3/4” EMT per charge. Brushless motor.

Standard equipment: Two 18V (5.0 A-H) batter-ies (48-11-1850), charger (48-59-1812), 30T blade, allen wrench, contractor bag.

Specifications: 3,900 RPM, 20mm arbor, 5.9 lbs. tool wt., 12.8 lbs. shipping wt.

SPECIAL PRICE Call

TORCH™ & AX™ with Carbide Teeth

For metal cutting, the TORCH™ with carbide teeth has been engineered to deliver extreme life & unmatched versatility in thick & extreme metal cut-ting applications. Up to 50x life of standard blades. Cuts stainless steel, cast iron, black pipe, angle iron, rebar & high strength alloys.

For nail embedded wood cutting, the AX™ with carbide teeth will deliver 50x longer life over stan-dard bi-metal blades and 2x faster cutting than other carbide blades.

SPECIAL: Buy two 5 paks, any mix below, get a FREE 5 pak of equal or lesser value to the least expensive pak ordered.

CARBIDE PRICE*/P/N TPI LENGTH STYLE BLADE

5501 7 6” TORCH $ 9.995502 7 9” TORCH 12.355521 5 6” AX 7.375526 5 9” AX 9.925527 5 12” AX 12.97

*Must buy blades in multiples of 5

Orbital “Super Sawzall”No. 6538-21Constant Power Technology™ – maintains con-stant speed under load for unmatched cutting per-formance. Counter balance. Variable speed trigger and dial speed control. Quik-Lok blade clamp. Keyless adjustable shoe.

Standard equipment: Plastic carrying case.

Specifications: 15-amps (120V, AC only) 0-2,800 SPM even under load, 11/4” stroke length, 9.8 lbs. tool wt., 14.4 lbs. shipping wt.

SPECIAL PRICE

Orbital “Super Sawzall”No. 6536-21 Counter balanced for smooth operation with less vibration. Orbit action “dial” allows user to select the amount of orbital action for more aggresive cutting in wood. Quik-Lok™ blade clamp, keyless adjustable shoe.

Standard equipment: Plastic carrying case.


SPECIAL PRICE Call

Orbital SawzallNo. 6519-31 Quik-Lok blade system. Counter balance mecha-nism, gear protecting clutch.

Standard equipment: Carrying case.


SPECIAL PRICE Call

M18 SawzallNo. 2720-22Keyless Quik-Lok blade system. LED light. Keyless adjustable shoe. M18 Fuel.

Standard equipment: Two 18V (4.0 A-H) Redlithium™ XC batteries (48-11-1840), charger (48-59-1812), blade, carrying case.

Specifications: 0-3,000 SPM, 11/8” stroke length, 181/2” long, makes 48 cuts/charge thru 2” x 12” pine, 8.9 lbs. tool wt., 11.4 lbs. shipping wt.


Sawzall BladesMilwaukee Sawzall blades are stocked in both the original thin-kerf style and the torch style blade. Torch are thicker blades, have a longer cutting life and a quicker more aggressive cut. Many other Milwaukee recip blades are stocked.

THIN-KERF TORCH™LENGTH TPI 5-95 100+ 5-95 100+

6” 14 $1.95 $1.72 $2.95 $2.606” 18 1.95 1.72 2.95 2.606” 24 1.95 1.72 _ _8” 18 2.42 2.13 _ _9” 14 2.42 2.13 3.90 3.43Must buy blades in multiple of 5

CALL 800-821-5448 OR FAX 800-844-1199

18V Jobsite RadioNo. 2890-20High performance audio system. Digital AM/FM tuner with 10 station presets. 2.1A USB charger. 3.5 mm aux in port for wired playback (cable includ-ed). 10.34 lbs. tool wt., 11.66 lbs. shipping wt.

SPECIAL PRICE Call2792-20 Radio Call

2363-20

Part # Lighting Description Price

2110-21 USB Rechargable Call Tool Flashlight 2111-21 USB Rechargable Call Hard Hat Headlamp 2112-21 USB Rechargable Call Rover Pocket Flood Light 2130-20 M18 Rocket LED $169 Tower Light 2361-20 M18 Rover LED Call Flood Light2363-20 M18 LED Lantern/ Call Flood Light 2735-20 M18 LED Call Work Light

LIGHTING

2130-20

11/4” Large DrillNo. 2404-1

Spindle is a #3 internal Morse Taper socket. Provides the most hand held power available. Use this to turn the largest bits into thick steel or to power a grain auger.

Standard equipment: Pipe handle.

Specifications: 10-amps (120V, AC/DC), 250 RPM no-load with reverse, spindle #3 Morse Taper, 11/4” chuck size, 183/4” long, capacities: 11/4” twist bit in steel, 11/2” flat boring bit in wood, 6” hole saw in wood, 45/8” self-feed in wood, 23.8 lbs. tool wt., 24.08 shipping wt.


3/4” DrillNo. 1854-1Standard equipment: Handle, chuck key and holder.

Specifications: 10-amps (120V, AC/DC), 350 RPM no-load, 3/4” chuck size, spindle is #3 Jacobs taper, triple gear train, 19.0 lbs. tool wt., 23.4 lbs. shipping.


1/2” Super-Hawg DrillNo. 1680-20Back half of tool rotates 180°. T-bar front grip handle.

Can power up to 45/8” selfeed bit in low speed or 29/16” in high speed.

Standard equipment: Side handle, chuck key.

Specifications: 13.0-amps (120V, AC only), 450 or 1,750 RPM no-load reversible, 14.65 lbs. tool wt., 16.5 lbs. shipping wt.

SPECIAL PRICE CallPlus Case (1680-21) Add $20

1/2” Hole-Hawg® KitNo. 1675-6Can power up to 45/8” selfeed bit in low speed. Drill with up to 13/8” selfeed bit in high speed.

Standard equipment: Side handle, chuck key and chuck key holder.

Specifications: 7.5-amps (120V, AC only), 300 or 1200 RPM no-load speed reversible, 11.5 lbs. tool wt., 14.6 lbs. shipping wt.

SPECIAL PRICE CallPlus Case (1676-6) Add $20

1/2” Spade-Handle DrillNo. 1660-6 or 1610-1 or 1630-1Choose 1660-6 for 450 RPM or 1610-1 for 650 RPM or 1630-1 for 1,000 RPM. The 1660-6 are AC/DC. The other two are AC only.

Standard equipment: Handle, chuck key with holder.

Specifications: 7-amps (see above for voltage and for RPM), 121/2” long, 11.4 lbs. tool wt., 12.6 lbs. shipping wt.



1/2” “Magnum”Hole Shooter, No. 0234-6Magnum exclusive features: quick change brush system, 8’ long Quik-Lok power cord and heavy-duty construction.

Standard equipment: Quik-Lok power cord, chuck key, rubber flex key holder and side handle.

Specifications: 5.5-amps (120V, AC only), 0-950 RPM no-load speed VSR, 4.75 lbs. tool wt., 6 lbs. shipping wt.


Heat GunNo. 8975-6Three position rocker switch: off/high/low.

Specifications: 11.6-amps (120V, AC only), max CFM: 14.8, 570°F or 1,000°F air temperatures, 101/2” long, 1.8 lbs. tool wt., 2.28 shipping wt.


18V HeatGunNo. 2688-21Reaching operational temperature in under 7 sec-onds.

Standard equipment: One 18V 5.0 A-H battery (48-11-1850), charger (48-59-1812), two nozzles, carrying case.

Specifications: 6 max CFM, 875°F constant tem-perature, 1.7 lbs. tool wt., 3.3 lbs. shipping wt.

SPECIAL PRICE Call

3/8” CloseQuarterAngle DrillNo. 0370-20This tool replaces the 0375-6. Primary differences are: 1) trigger–the 0370-20 has large textured paddle for added comfort vs small paddle 2) motor housing–the 0370-20 has gear train enclosed in metal housing for greater stability and longer life vs part of clam shell motor housing 3) price–0370-20 costs less.

Specifications: 3.5-amps (120V, AC only), 0-1,300 RPM no-load speed VSR, 55° angled chuck, 3.9 lbs. tool wt. (with cord), 4.75 lbs. ship-ping wt.



18V/12V WirelessJobsite SpeakerNo. 2891-20The Milwaukee wireless jobsite speaker delivers the loudest & clearest sound - on or off the jobsite. The premium six speaker design provides unmatched clarity of sound with booming bass, clear mids, and sharp highs. Paired with a 40W dual channel digital amplifier, the speaker produces big sound to fill any room or work environment. Features impact resistant side caps and a reinforced honeycomb grill to withstand drops & abuse. The latest bluetooth technology ensures easy pairing with a smartphone, tablet or other mobile device from up to 100’ away. Compatible with all M18 & M12 batteries or able to run off AC power, this speaker maximizes versatility, functionality & performance to set a new standard in high definition jobsite sound. Includes AC adapter.

SPECIAL PRICE Call


Magnesium 101/4”Worm Drive Sawsquatch™No. SPT70WM-01Standard equipment: 40T carbide blade, wrench, saw hook.

Specifications: 15-amps (120V AC/DC) 4,600 RPM, diamond knockout arbor, 51° bevel cap, depth of cut: 311/16” at 90° and 23/4” at 45°. 16.45 lbs. tool wt, 23.6 lbs. shipping wt.


16” Worm DriveCarpentry Chain SawNo. SPT55-11Make impossible cuts possible. Backed by legend-ary worm drive gearing, this 16” carpentry chain-saw combines power & durability for extraordinary productivity. The “Full House Chain” (Means a cutter on every link - ALL standard chains have a cutter on every other link), produces precise, clean cuts in a fraction of the time. Magnesium construc-tion for lightweight design.

Standard equipment: 56T chain (90F056), auxil-iary handle, saw stand.

Specifications: 15-amps (120V, AC only) 6,300 RPM, max cut: 141/4” @ 90°, 93/4” @ 45°, 67/16” @ 60°, 18 lbs. tool wt., 26 lbs. shipping wt.


12” Worm Drive Dual Bevel Sliding Miter SawNo. SPT88-01FREE 13-amp recip saw (SPT44-00) with pur-chase. (see box to left). Worm drive gearing with electric brake. LED shadow light casts a shadow to assist with cutline.

Standard equipment: 60T carbide blade, dust bag, dust elbow, 2-size allen wrench.

Capacities: Max miter angle: 60° right, 50° left, max bevel angle: 48° right & left, miter detents: 0°, 15°, 22.5°, 31.6°, 45° right & left, 60° right, 50° left, bevel stops: 0°, 22.5°, 33.9°, 45°, 48° left & right.Max wood to miter cut; @ 0° 4x14”, @ 45° right 4x10”, @ 50° right 4x8”, @ 60° right 4x6”.

Specifications: 15-amps (120V, AC only), 4,000 RPM, 1” arbor, 51 lbs. tool wt., 67 lbs. shipping wt.


Recip SawNo. SPT44-00Anti-vibration. Soft start. Quick change release. Fixed shoe.

Specifications: 13-amps (120V, AC only), 0-2,800 SPM, 11/8” stroke, 8.8 lbs. tool wt.



81/4” WormDrive SawNo. SPT78W-01Standard equipment: 24T carbide blade, wrench.

Specifications: 15-amps (120V AC/DC) 4,700 RPM, diamond arbor, 60° bevel cap, max cut: 2.875” at 90° and 2.25” at 45°, tool wt 16.5 lbs., 18.8 lbs. shipping wt.



Magnesium 71/4” Worm Drive SawNo. SPT77WML-01Lightweight at just 11.5 lbs due to the magnesium foot and housing.

Standard equipment: 24T carbide blade, wrench, rafter hook.

Specifications: 15-amps (120V AC/DC) 5,300 RPM, diamond arbor, 51° bevel cap, magnesium housing, max cut: 2.375” at 90° and 1.9375” at 45°, tool wt. 11.5 lbs, 15.4 lbs. shipping wt.



71/4” Worm Drive SawNo. SPT77W-01

Standard equipment: 24T carbide blade, wrench, rafter hook.

Specifications: 15-amps (120V AC/DC) 5,300 RPM, diamond arbor, 51° bevel cap, aluminum housing, max cut: 2.4” at 90° and 1.96” at 45°, tool wt. 14.2 lbs, 18.8 lbs. shipping wt.

REGULAR PRICE $324SPECIAL PRICE $169.95


Outlaw™ Metal Cutting 8” WormDrive SawNo. SPT78MMC-01

FREE 8” 48T ® blade$52 Value.The first worm drive saw for metal, which provides left side blade and blade window for unique cutting visibility. Large chip collecting tray. Stainless steel foot.

Standard equipment: 42T Cermet blade, wrench and one FREE 48T ® blade.

Specifications: 15-amps (120V, AC/DC) 3,800 RPM no-load, 5/8” arbor, 15.4 lbs. tool wt, 20 lbs. shipping wt.



165/16 ” Magnesium Super Sawsquatch™

Worm Drive SawNo. SPT70V-11

The biggest/baddest worm drive saw on Earth. 61/4” cutting depth at 90° & 45/16” at 45°. Electric brake.

Standard equipment: 32T carbide blade, auxiliary handle, wrench, tool case which doubles as a saw stand.

Specifications: 15-amps (120V AC only), 2,500 RPM, 1” arbor, max cut is 61/4” at 90° & 45/16” at 45°,f 17/8” dust port, 27.3 tool wt., 49 lbs. shipping wt.


16” 80T BLADE TO CUT SANDWICH PANELS $425

48V Cordless 71/4”Worm Drive SawNo. SPTH77M-11FREE 2nd battery (SPTH15) with each tool. $199 value.

Brushless motor responds to challenging applications by boosting power & torque. All-magnesium construction for light weight.

Standard equipment: One 48V (5.0 A-H) lithium battery (SPTH15), 380W charger (SPTH14), 24T blade.

Specifications: 5,800 RPM, 7/8” diamond knockout arbor, 4.25 lbs. battery wt., 11.1 lbs. bare tool wt., 18.4 lbs. shipping wt.


CALL 800-821-5448 OR FAX 800-844-1199

36V 14” Chop SawNo. XWL01PTSimultaneously uses (requires) two 18V batteries. Brushless motor. “Tool-less” flange removal for quick blade changes. “Tool-less” fence. Soft start. Electric brake.

Standard equipment: Two 18V 5.0 A-H batter-ies (BL1805B), dual-port charger (DC18RD), one blade.

Specifications: 3,800 RPM, 1” arbor, max cutting: 5” round or 4” x 75/8” rectangular, 35.9 lbs. tool wt. with batteries, 49.5 lbs. shipping wt.


18V 57/8” MetalCutting SawNo. XSC04TChip collector. Brushless motor with electric brake.

Standard equipment: Two 18V 5.0 A-H batter-ies (BL1850B), charger (DC18RC), 32T blade, wrench, eye goggles, tool bag.

Specifications: 4,200 RPM, 5/8” arbor, 21/4” max cutting depth, 6.8 lbs. tool wt. with battery.


MetalCutting 71/4”Circular SawNo. 4131Heavy duty blade cover has window to allow oper-ator to see how full the chip collector tray is.

Standard equipment: 36T 5/8” arbor cermet metal cutting blade, hex wrench, wrench holder, safety goggles.

Specifications: 13-amps (120V, AC only), 3,500 RPM no-load speed, 5/8” arbor, 21/2” max cutting depth, 10.6 lbs. tool wt., 15.0 lbs. shipping wt.


SLASHER METAL CUTTING BLADES PG. 44

165/16” Circular SawNo. 5402NAMonster sized 165/16” diameter saw blade cuts 61/4” at 90° and 43/16 at 45°. Low noise level of 87 dB. Electric brake.

Standard equipment: 32T carbide blade (A-90956), wrench, rip fence.

Specifications: 15-amps (120V, AC only), 2,200 RPM, 1,800 watts out, 1” arbor, max cut is 61/4” at 90° and 43/16” at 45°, 28.7 lbs. tool wt., 37.4 lbs. shipping wt.


16” 80T BLADE TO CUT SANDWICH PANELS $425

1” SDS HammerNo. HR24753 modes of operation. 40 bit angle settings. 7 amps - 2.7 joules of impact energy.

Standard equipment: Side handle, depth gauge, tool case.

Specifications: 7-amps (120V, AC only), 0-1,000 RPM, 0-4,500 BPM, 31/8” max core bit, 2.7 joules impact energy, 6.6 lbs. tool wt. 11.9 lbs. shipping wt.


5” Angle GrinderNo. 9005BStandard equipment: Grinding wheel, wheel guard, side handle, inner flange, lock nut, spindle washer, wrench, trigger “with lock-on”.

Specifications: 9-amps (120V, AC/DC), 10,000 RPM no-load speed, 5/8-11 UNC spindle, 14” length, 6.6 lbs. tool wt., 9.3 lbs. shipping wt.



18V BARE TOOLS

XAG04Z 41/2” Grinder $ 123XFD12Z 1/2” Drill 109XRH04Z 7/8” SDS Hammer 145XRJ04Z Recip Saw 99XRT01ZK Rebar Tie-Wire 1,775XSJ02Z 16 ga Shear 285XSS02Z 61/2” Circ Saw 99XWT04Z 1/2” Sq Dr Impact 169

XSJ02Z

XAG04Z

Groove Cutter forAluminum Composites No. CA5000X45/8” blade cuts grooves in aluminum composite materials (A.C.M.). Built-in depth adjustments at 3 mm, 4 mm, & 6 mm. Close to edge cutting at 11/16”. Electronic controller provides constant speed, even under load & provides soft start. Mechanical brake.

Standard equipment: 45/8” aluminum grooving saw blade, wrench.

Specifications: 12-Amps (120V, AC only), 2,200-6,400 RPM, 13/16” arbor, 7/16” max cutting depth, 11.3 lbs. tool wt., 14.75 lbs. shipping wt.


18V 16 Gauge ShearNo. XSJ02ZSlide switch with lock-on capability. Externally accessible brushes.

Standard equipment: Hex wrench, thickness gauge.

Specifications: 4,300 SPM, capacity 16 ga mild steel, 18 ga stainless, radius cutting capability of 97/8” diameter, 4.4 lbs. tool wt., with battery, 4 lbs. shipping wt.


16 Gauge ShearNo. JS1602Large, easily replaceable blades with 8 cutting edges each blade. Lock-on switch for continuous operation.

Standard equipment: Shear blade set (383) and wrench.

Specifications: 3.3-amps (120V, AC only), 4,000 SPM 13/16 min. cutting radius, 3.4 lbs. tool wt., 4.9 lbs. shipping wt.


18V16 Gauge Nibbler No. XNJ01TDie holder rotates 360°. Lock-on sliding switch for continuous operation. Chip disposal is below cutting material. Battery capacity warning system turns on indicator light and automatically stops motor to notify user when it’s time to recharge the battery.

Standard equipment: Two 18V LXT (5.0 A-H) lith-ium-ion batteries (BL1850B), charger (DC18RC), punch (951), die (051), wrench, tool bag.

Specifications: 0-1,900 SPM no-load, 13/4” min. cutting radius, cutting capacity: 16 ga. mild steel, 18 ga. s/s, 12 ga. alum, 4.8 lbs. tool wt., 13.3 lbs. shipping wt.


16 Gauge Nibbler No. JN1601Standard equipment: Two wrenches.

Specifications: 5-amps (120V, AC only), 2,200 SPM no-load, smallest cutting radius 2”, capacities: 16 ga. mild steel, 10 ga. aluminum, 18 ga. stain-less, 3.6 lbs. tool wt., 4.9 lbs. shipping wt.



7/8” ShearWrenchNo. 6922NBThis tool can install 5/8”, 3/4” and 7/8” diameter tension control bolts. The 5/8” inner and outer sleeve neces-sary to install 5/8” bolts are not standard equipment. To order; 5/8” outer sleeve (5943211) $48/e and inner sleeve (5943261) $125/e. Tool has 3/4” sleeves factory installed.

Standard equipment: 3/4” outer sleeve (5943203), 3/4” inner sleeve (5943253), 7/8” outer sleeve (5943198), 7/8” inner sleeve (5943229), screw-driver, steel case.

Specifications: 12-amps (120V, AC only), 18 RPM no-load, max torque 593 ft-lbs., 12.2 lbs. tool wt., 21 lbs. shipping wt.


RENTTHIS

36V 7/8” Shear WrenchNo. XTW01PTSimultaneously uses (requires) two 18V batter-ies. 593 ft-lbs. of torque. Electric brake. Brush-less motor. Can install 5/8”, 3/4” & 7/8” tension control bolts. Up to 14% faster fastening than the 6922NB.

Standard equipment: Two 18V 5.0 A-H batteries (BL1850B), dual-port charger (DC18RD), 3/4” inner & outer sleeve, 7/8” inner & outer sleeve (these sleeves are same p/n’s used on 6922NB), screw-driver, shoulder strap, tool case.

Specifications: 14 RPM no-load, max torque 593 ft-lbs. 15.7 lbs. tool wt. with batteries, 34.6 lbs. shipping wt.


18V Rebar Tie-Wire ToolNo. XRT01ZKMultiple bar tying capability; ties up to two #5 dia bars or four #4 dia bars in under 1 second. Up to 5,300 ties of #3 x #3 dia rebar per charge using 5.0 A-H battery. 2 modes provide single or continuous wire tire actuation. Brushless motor. Approx 120 ties per reel of #3 x #3 rebar.

Standard equipment: Hex wrench, tool storage case.

Specifications: 6 tying strength levels, tying speed 0.8 seconds, rebar capacity: #3 x #3 to #5 x #5, wire diameter 21 gauge, 12” long, 5.7 lbs. tool wt. with battery, 11.7 lbs. shipping wt.


36V BlowerNo. XBU02PT1Simultaneously uses (requires) two 18V batteries. Brushless motor delivers up to 120 MPH air veloc-ity and 473 CFM of air volume. 6 stage air velocity dial with variable speed trigger. 61 dB(A). Up to 28 min of run time at mid-speed (15,800 RPM).

Standard equipment: Four 18V 5.0 A-H batteries (BL1850B), dual-port charger (DC18RD).

Specifications: 120 MPH max air velocity, 473 CFM air volume, 11,400-21,500 RPM, 61 dB(A) sound pressure, 365/8” length, 9 lbs. tool wt. with batteries, 20.5 lbs. shipping wt.


1” Impact WrenchNo. TW1000Powerful 738 ft-lbs. of torque.

Standard equipment: Steel tool case, side han-dle, hex wrench.

Specifications: 12-amps (120V, AC only), 1,400 RPM no-load speed, 1,500 IPM, max torque 738 ft-lbs., 18.5 lbs. tool wt., 28.6 lbs. shipping wt.


3/4” Impact WrenchNo. 6906Rocker type reversing switch for one handed for-ward-reverse operation. Max torque 433 ft-lbs.

Standard equipment: Steel tool case, grip assem-bly, hex wrench.

Specifications: 9-amps (120V, AC only), 1,700 RPM no-load speed, 1,600 IPM, max torque 433 ft-lbs., 11 lbs. tool wt., 22 lbs. shipping wt.


18V Brushless 2-PcsCombo KitNo. XT267M

Standard equipment: Two 18V 4.0 A-H lithi-um-ion batteries (BL1840B), charger (DC18RC), tool belt clip, depth gauge, side handle, tool case.

Specifications: 1/2” hammer 2-speed driver-drill (XPH07) 0-550 and 0-2,100 RPM brushless motor up to 1,090 in-lbs. max torque, 5.9 lbs. tool wt. with battery and 1/4” hex impacting screwdriver (XDT13Z) 0-3,400 RPM, 0-3,600 IPM, brushless motor up to 1,500 in-lbs. max torque, 3.3 lbs. with battery, 19.4 lbs. shipping wt.


18V Brushless 2-PcsCombo KitNo. XT269MStandard equipment: Two 18V 4.0 A-H lithi-um-ion batteries (BL1840B), charger (DC18RC), carrying case.

Specifications: 1/2” hammer 2-speed driver-drill (XPH12Z) 0-500 and 0-2,000 RPM brushless motor, 530 in-lbs. max torque, 3.3 lbs., and 1/4” hex impacting screwdriver (XDT13Z) 0-3,400 RPM, 0-3,600 IPM brushless motor, 1,500 in-lbs. max torque, 2.5 lbs. tool wt.


LITHIUM-IONPART # BATTERIES PRICE

BL1830B 3.0 A-H $50 BL1840B 4.0 A-H 78 BL1850B 5.0 A-H 79 DC18RC Charger 89

BL1830

Batteries & ChargersMany other Makita batteries are stocked for same day shipping. While supply lasts.

18V 6-Pcs Combo KitNo. XT610Kit includes: 1/2” hammerdrill/driver (XPH10Z), 1/4” hex impacting screwdriver (XDT11Z), reciprocating saw (XRJ04Z), 41/2” angle grinder (XAG03Z), 61/2” circular saw (XSS02Z), flashlight (DML185).

Standard equipment: Two 18V (3.0 A-H) lithi-um-ion batteries (BL1830), charger (DC18RC), contractor bag with wheels (831269-3).


18V 2-Pcs Combo KitNo. XT268TStandard equipment: Two 18V 5.0 A-H lithi-um-ion batteries (BL1850B), charger (DC18RC), tool bag.

Specifications: 1/2” hammer 2-speed driver-drill (XPH07Z) 0-550 & 0-2,100 RPM, brushless, 1,090 in-lbs. max torque, 5.9 lbs. with battery and 1/4” hex impacting screwdriver (XDT14Z) 3-speed 0-1,100/0-2,100/0-3,600 RPM & 0-1,100/0-2,600/0-3,800 IPM, brushless, 1,550 in-lbs. max torque, 3.3 lbs. tool wt. with battery, 15.3 lbs. ship-ping wt.


18V 3-PcsCombo KitNo. XT336T

Standard equipment: Two 18V 5.0 A-H lithi-um-ion batteries (BL1850B), charger (DC18RC), tool bag.

Specifications: 1/2” hammer 2-speed driver-drill (XPH07Z) 0-550 & 0-2,100 RPM, brushless, 1,090 in-lbs. max torque, 5.9 lbs. with battery and 1/4” hex impacting screwdriver (XDT14Z) 3-speed 0-1,100/0-2,100/0-3,600 RPM & 0-1,100/0-2,600/0-3,800 IPM, brushless, 1,550 in-lbs. max torque, 3.3 lbs. with battery and recip saw (XRJ07Z, 0-3,000 SPM, 13/16” stroke length, brush-less, 19.85 lbs. shipping wt.


CALL 800-821-5448 OR FAX 800-844-1199

6” Cut-Off Machine with Auto-BrakeNo. WEPBA17-150 QUICKThis tool reduces the chance of injury from kick back and loss of control of grinder. Helping to prevent injuries helps keep your EMR mode rating low. Auto-brake designed to stop grinding wheels in under two seconds and cut-off wheels in under one second. “S” automatic clutch helps prevent kickbacks. Autobalance aids in reducing operator fatigue, soft-start electronics.

Standard equipment: Wheel guard, anti-vibration, inner flange and nut, side handle, outer nut.

Specifications: 14.5-amps (120V, AC only), 9,600 RPM, 5/8-11 spin-dle, max torque 38.1 in-lbs., 6.2 lbs. tool wt., 7.23 lbs. shipping wt.


41/2” Angle GrinderNo. WP9-115 QuickPaddle switch with dead-man function: safe to operate due to an ergonomically integrated non-slip switch. “S-Auto Safety Clutch” helps user maintain control if the abrasive wheel jams and reduces likelihood of kick back. “Quick System” tool-free disc change. Tool-free adjustable guard.

Standard equipment: Wheel guard, side handle, inner flange and nut.

Specifications: 8.5-amps (120V, AC/DC), 10,500 RPM, 5/8-11 spindle thread, max torque 22.1 in-lbs., 4.6 lbs. tool wt., 6.03 lbs. shipping wt.


1-49 50 100+

41/2” x .045” Type 1 Wheels $1.84 $1.54 $1.34

41/2” Angle GrinderNo. W9-115 QuickSlide switch with lock-on. Gear housing can be rotated 180°. Exclusive “S-Auto Safety Clutch” helps user maintain control if the abrasive wheel jams and reduces likelihood of kick back. “Quick System” tool-free disc change. Tool-free adjustable guard.

Standard equipment: Wheel guard, side handle, inner flange and nut.

Specifications: 8.5-amps (120V, AC/DC), 10,500 RPM, 5/8-11 spindle thread, max torque 22.1 in-lbs, 4.6 lbs. tool wt., 6.03 lbs. shipping wt.


1-49 50 100+

41/2” x .045” Type 1 Wheels $1.84 $1.54 $1.34

6” Cut-Off MachineNo. WE15-150QUICKSlide switch with lock-on. Electronic Speed Stabilization maintains speed, even under load. “S-Automatic Safety Clutch” reduces kick-backs. “Quick System” tool-free disc change. “Soft Start” increases motor life.Or for dead-man non-locking bottom paddle switch (WEP15-150) add $10.Standard equipment: Wheel guard, anti-vibration side handle, inner flange and nut.Specifications: 13.5-amps (120V, AC only), 9,600 RPM, 5/8-11 spindle, max torque 34.5 in-lbs., 5.7 lbs. tool wt., 6.5 lbs. shipping wt.


1-49 50 100+6” x .040” Type 1 Wheels $2.58 $2.15 $1.86

DeWalt & Metabo .045” Thin Cutting Wheels

Super thin 60 grit abrasive wheels are specially formulated to cut fast and burr-free. Use to cut steel, pipe, rebar, channel, angle iron… Available in Type-1 (use 5/8-11 reusable adapter for angle grinders) and Type-27 (use standard Type-27 flange for angle grinders). Max RPM is 13,300 for 41/2” and 10,100 for 6”.

Three grades are offered. For general purpose metal cutting you may purchase DeWalt or Metabo. For cutting stainless, order the Metabo Slicer-Plus. For even faster cutting of stainless, order the Metabo Super-Slicer.

TYPE-1 TYPE-27DESCRIPTION 1-49 50 100+ 1-49 50 100+ 41/2 x .045 x 7/8” Gnrl Purpose $1.84 $1.54 $1.34 $2.09 $1.76 $1.54Ditto, But Slicer-Plus 2.37 1.98 1.72 2.75 2.29 1.99Ditto, But Super-Slicer 4.37 3.64 3.17 – – –6 x .045 x 7/8” Gnrl Purpose 2.58 2.15 1.86 2.71 2.25 1.96Ditto, But Slicer-Plus 3.42 2.96 2.50 4.39 3.66 3.18Ditto, But Super-Slicer 5.62 4.68 4.08 – – –

11/8” SDS Rotary Hammer No. RH228VC40 position vario-lock for chiseling. 3 modes of operation; rotary only, rotary and hammer, ham-mer only. Counter balance vibration control.


Specifications: 8-amps (120V, AC only), 0-1,300 RPM, 0-5,800 BPM, 23/4” max core bit size, 2.4 ft-lbs. impact energy, 6.9 lbs. tool wt., 11.7 lbs. shipping wt.

REGULAR PRICE $479SPECIAL PRICE $169.95

1” SDS Rotary Hammer No. 11255VSR

NOTICE: The RH228VC (pictured left) has more power, more features & costs $30 LESS than this tool & weighs just 0.2 lbs. more.


Specifications: 7.2-amps (120V, AC only), 0-1,300 RPM no-load VSR, 0-5,800 BPM, 2.2 ft-lbs. impact energy, 6.7 lbs. tool wt., shipping wt. 11.4 lbs.


Before ordering this tool, check out the RH228VC (left)

11264EVS 15/8” SDS-MAX Hammer $599

11316EVS SDS-MAX Demo Hammer 699

11321EVS SDS-MAX Demo Hammer 529

1821D 5” Grinder 119

AG4D-85PD 41/2” Grinder 85

BAT415 12V 2.5 A-H Battery 39

RH328VC 11/8” SDS Hammer 269

RH540M 19/16” SDS-MAX Hammer 399

RH540S 19/16” Spline Hammer 399

SG250 Tek Gun 119

CloseoutBlowoutOn All Of

These BoschToolsCloseout

BlowoutOnly 62

Units Left


12” Cut-Off Machine

No. CC12YMTool design directs sparks away from user. Autostop carbon brush protects armature.

Standard equipment: One wheel to cut metal, one wheel to cut concrete, two wrenches.

Specifications: 15-amps (120V, AC/DC), 5,000 RPM no-load speed, 1” arbor, 4” max cut, 23.1 lbs.


Rebar Cutter/Bender No. VB16YMCan easily cut or bend rebar. When bending, select 0-180° bends by a simple turn of a dial.

Standard equipment: Deflection guard, wrench.

Specifications: 8-amps (120V, AC only), makes 180° bends in 4.3 seconds, cut in two parts takes 2.5 seconds irrespective of rebar diameter up to and including #5 (5/8”), 39.7 lbs. shipping wt.


36V Cordless (VB3616DAM) $2,175

3/4” Impact WrenchNo. WR22SEMBrushless motor. Aluminum housing.

Specifications: 8.3-amps (120V, AC/DC), 1,400 RPM, 2,000 IPM, 460 ft-lbs. max torque, 10.1 lbs. tool wt.


1” Impact WrenchNo. WR25SEMBrushless motor. Aluminum housing. Improved efficiencies: minimal voltage drop while attached to 300’ of extension cords.

Specifications: 9.4-amps (120V, AC/DC), 1,100 RPM, 1,500 IPM, 740 ft-lbs. max torque, 17 lbs. tool wt.


MST 180i Specifications MST 220i Specifications

Max. Output 180 Amp 210 AmpMax. Plate thickness 1/4” (6.4mm) 3/8” (12.7mm)Mig (GMAW/FCAW) 180A/23V @ 20% Duty Cycle 110A/19.5V @45% Duty Cycle (115V)Welding Output @ 104°F (40°C) 145A/22.5V @ 30% Duty Cycle 210A/23.5V @ 20% Duty Cycle (230V)Stick (SMAW) 175A/27V @ 20% Duty Cycle 110A/24.8V @ 35% Duty Cycle (115V)Welding Output @ 104°F (40°C) 140A/25.6V @ 30% Duty Cycle 200A/25V @ 25% Duty Cycle (230V)Tig (GTAW) 175A/17V @ 25% Duty Cycle 150A/16V @ 35% Duty Cycle (115V)Welding Output @ 104°F (40°C) 160A/16.4V @ 30% Duty Cycle 200A/18V @ 25% Duty Cycle (230V)Current Range 10-180 Amp 10-150 Amp (115V), 10-210 Amp (230V)MIG Welding Voltage Range 14.5-26 Volt 14-30 VoltWirefeed Speed Range 100-650 IPM (2.5-16.5 m/min) 100-600 IPM (2.5-15.2 m/min) @ 230V 100-400 IPM (2.5-10.2 m/min) @ 115VNominal OCV Volt/DC 62 Volt 62 VoltWattage required for use with 9000 7500Generator $898 $1,299

Multi-Process Welding Systems

Using the Quick Start 4 step guide included with these machines you will be welding like a pro in no time. Two models are offered, a 230 volt 180 amp unit or the more versatile 115V/230V 210 amp unit. Both are spool gun capable for Aluminum MIG welding. Both include Flow meter regulator, gauge and hose, electrode holder and ground clamp, 2 driver rolls and contact tips.

CLOSEOUTWHILE

SUPPLY LASTS Plasma Cutting

MachinesPortable, affordable and

quality by Victor!

Cut steel, stainless steel, brass or aluminum with compact

units by Firepower®

AirCut™ 15C Cutmaster® 42

Cut Capacity 1/8” recommended, 3/16” max. 1/4” recommended, 7/8” maxAir Required Built in compressor 75 PSI (5.2 bar)Flow – 3.2 cfm (91 1/m)Input Power 120V (+-10%) 1 phase 12 amp 60 Hz 120-230V, 1 Phase, 50/60 HzDuty Cycle 35% @ 15 amp 40% @ 40 amp @ 230VAmperage Draw 15A @ 120V 29A @ 120V/15A @ 230VTorch Model PCH-10 SL40™Weight 29 lbs. (13.2 kg.) 26 lbs. (11.8 kg.)Generator wattage if used 2000 Watts 4000 WattsPower cable, torch and leads Included Included

$1,199 $1,275

CLOSEOUTWHILE

SUPPLY LASTS

16 Gauge NibblerNo. CN16SAM Three position indexing die holder for quick and easy direction changes. Most suitable for cutting corrugated and trapezoidal sheets.

Standard equipment: Wrench.

Specifications: 3.5-amps (120V, AC only), 2,300 SPM no-load, minimum cutting radius 137/64”, 5.2 ft./min. cutting speed in 18 ga. cold rolled steel, 3.5 lbs. tool wt.


EXTRA PUNCH (030) $13.85, DIE (039) $33.50, and DIE HOLDER (038) $128

18V 16 Gauge NibblerNo. CN18DSLQ4M

This cordless tool uses the same punch & die as our popular CN16SAM - pict left. Tool includes one FREE battery but no charger. See bottom of this box to order charger.

Standard equipment: A total of one FREE 18V 3.0 A-H battery (339782), wrench.

Specifications: 18V, 2,500 SPM, min cutting ra-dius 19/16”, 5.5 ft./min cutting speed in 18 ga. cold rolled steel, tool wt. with battery 4.6 lbs.


#339782 18V 3.0 A-H BATTERY $37UC18YSL3 CHARGER $46

030 PUNCH $13.85 039 DIE $33.50

16 Gauge ShearNo. CE16SAMCuts 26.7’ of 16 gauge mild steel per minute. Easily replaced blades have eight cutting edges.

Standard equipment: Stationary blade (001), moving blade (000), wrench, thickness gauge.

Specifications: 3.7-amps (120V, AC only), 4,200 SPM, 1” minimum cutting radius, 4.0 lbs. tool wt.

REGULAR PRICE $479SPECIAL PRICE $299EXTRA MOVING BLADE (000) $9 and

FIXED BLADE (001) $9

41/2” Angle GrinderNo. G12SE2MLarge paddle switch. Unique “toolless” wheel guard. Excellent overload durability.

Standard equipment: Side handle, wrench.

Specifications: 9.5-amps (120V, AC/DC), 10,000 RPM no-load, max watts out 2,100, 5/8”-11 spindle thread, 4.2 lbs. tool wt.


41/2” 6.2-AMP GRINDER (G12SR4) SUBTRACT $50

&

CALL 800-821-5448 OR FAX 800-844-1199

36V Cordless Power CutterLightweight battery powered cutter that features low vibration and excellent power to weight ratio. With a brushless motor this is a versatile tool for quick efficient cuts. It is suitable for concrete garden plates, granite or roof and floor tiles. Cuts wet/dry, comes with a 5.2 A-H battery, charger and tacti-cut battery blade. Arbor is .87”.

BLADE MAX BLADE PERIPHERAL TOOL SHIPPING PART # SIZE THICKNESS SPEED MAX FPM WEIGHT WEIGHT. PRICE

K535i Kit 9” .12” 13,800 FPM 7.7 lbs. 13 lbs. $899

PART # DESCRIPTION PRICE

575383225 Red 6” blade for Same Day cutting $89575383221 Purple 6” blade for Next Day cutting 89

Husqvarna Soff-Cut 150

The Soff-Cut 150 is designed for residential and light com-mercial applications. Designed for ease of use and conve-nience it is the lightest gas saw in the Soff-Cut range. Features a patented low noise blade enclosure and the low-dust blade block system allows the saw to cut dry, controlling debris.

BLADE FUEL TOOL SPECIALPART # HP SIZE ARBOR CAP. WEIGHT PRICE

966844805 4.3 6” Tri-arbor .7 gal. 87 lbs. $2,325

Husqvarna K760Cut-n-Break

Versatile power cutter for anyone that needs to cut up to 16” deep. Ideal for window and door openings where you don’t want overcutting at the corners. Cuts pipe in trenches, grooves for cabling, expansion joints and crack repairs.

Each cut can be up to 21/2” deep and 3/4” wide. Since the cutter has twin blades (one set included) a core is formed in the saw cut. The core can easily be broken off using the breaking tool (included). Continue with addition-al cuts to the desired depth. Maximum depth 16”.

Features • Digital ignition system • SmartCarb™ Fuel system • Active Air Filtration™ air cleaning. BLADE FUEL TOOL WT. SPECIALPART # HP SIZE CAP. W/O FUEL PRICE

967195701 5 9” .95 qt. 23.3 lb. $1,732576778501 General Purpose Replacement Blade Set $299

Husqvarna K4000 Electricwith Vac Attachment

The versatile K4000 uses 1,800 watts to ensure enough power for cutting depths up to 5”. Advanced Elgard™ elec-tronic overload protection varies the rotation speed to warn of approaching overload. Electronic Softstart™ provides normal starting with normal, slow acting fuses. Cutting in a downward or pulling rotation reduces the risk of jamming and kickback. Vac attachment works with any shop vac capable of handling concrete dust and uses 11/2” hose.

BLADE CUT TOOL PART # MOTOR CAP. DEPTH WGHT. PRICE

967084001 110V 14” 5” 20.7 lbs. $921

BLADES SOLD SEPARATELY

BLADE DISPLACEMENT TOOL HORSE SPECIALMODEL # CAPACITY CU.-INCH WT. (LBS.) POWER PRICE

K770 12”/14” 4.48 21.4 5 $ 919K970 Active 12”/14” 5.7 22.9 6.1 1,298

Husqvarna gas saws have the power professionals demand. Features include • Active Air Filtration™ for long service intervals • SmartCarb™ for extended filter life • DuraStarter™ dust protected for added life • Decompression valve which reduces the force required to start by 50% • Wet-cut kit • 1” arbor is standard. 20mm flange is included.

HusqvarnaGas Saws

BLADE SOLD SEPARATELY

5+PART # DIA 1-4 MIX/MATCH

DM9”FR3 9” $ 79 $ 75DM12”FR3 12” 174 163DM14”FR3 14” 190 176

Steel Decking BladeBlade is recommended to cut metal – perfect for steel decking. It will also cut wood, rebar, copper, PVC pipe, concrete and brick/block.

MASONRY EQUIPMENT


Part # Size Switch RPM/AMP Price

WSG7-115 41/2” Slide 12,500/8 $ 69WSG7-115PT 41/2” Dead Man 12,500/7 79WSG8-115 41/2” Slide 11,000/6.7 119*WSG12-125P 5” Slide 11,000/10 118*WSG15-125P 5” Slide 11,000/12.5 147

*While supply lasts

Grinders

WSG7-115PT

6” GrinderWSG17-150P1,500 watt grinder with POWERtronic for constant speeds under load. Soft start, self-start lock switch with kickback stop. Unrivaled copper content for enormous power. Long carbon brush life due to innovative design and optimum ventilation. Easy, fast replacement through two service caps. Optimum switch position for every appli-cation. Metal gear head rotates in 90° steps.

Standard equipment: Non-slip safety guard, one pair of flanges, accessory handle and wrench.

Specifications: 12.5-amps (120V, AC only), 8,500 RPM no-load speed, 5/8-11 spindle, 5.3 lbs. tool wt., 7.8 lbs. shipping wt.


14” Metal Cutting SawMCCS14

Cut metal faster and safer than abrasive saws. Low speed, high torque, long-life powerful 2,200 watt motor. Durable steel construc-tion and automatically retracting lower safety guard. Cuts mild steel, stainless steel, thin steel and aluminum.

Standard equipment: Mild steel blade, wrench, ear plugs and goggles.

Specifications: 15-amps, (120V, AC only) 1,800 watt, 60 Hz., 1,300 RPM, 14” blade diameter, 1” arbor. Capacity-round 45° 41/8”, 90° 51/8”; Square 45° 31/2”, 90° 43/4”; Rectangular 45° 31/2” x 43/8”, 90° 33/4” x 71/4”, 13.6 lbs. tool wt.


SLASHER METAL CUTTING BLADES PAGE 44

18 Gauge NibblerABLK18 1.3E

Cut flat, corrugated or trapezoidal sheet metal. Rotating punch for longer life. Cutting direction can be changed in 45° increments up to 360°.

Standard equipment: Case, rapid charger, two Li-ion batteries, .000 punch, and. 009 die.

Specifications: 18V 5-amp hour battery, variable speed, 7.5 ft/min. cutting speed, cutting width 3/16”, radius of smallest curve (inside/outside) 9/16” / 13/16”, 3.5 lbs. tool wt. with battery.


18 Gauge Nibbler, FN BLK 1.3CSThe fastest, most maneuverable and well balanced nibbler in the industry. The BLK 1.3CS is the finest nibbler available to cut flat or corrugated sheet metal up to 18 gauge thick. Cutting speed is a snappy 7.5 ft/min. Rotating punch system increases punch life by 30%. Eight die locations allow cutting direction to be adjusted in 45° increments without tools. No tools needed to change punch or die. No set screw on die, instead unscrew by hand the collar around the die.

Standard equipment: 000 punch and 009 die.

Specifications: 2.8-amps (120V, AC only), 0-1,800 VS SPM, input watts is 350 watts, smallest radius 3/4”, plunge diameter start hole 3/4”, cutting capacity: 18 ga. mild steel, 22 ga. S/S, 14 ga. alum., 3/32” plastics, 3.85 lbs. tool wt.


9” Metal Cutting SawMCSL09Slugger Metal Cutter cuts steel as easily as plywood with a built in laser guide and light. Cuts faster, cleaner, safer and more affordable than other metal cutting equip-ment. The specially designed cover collects virtually all chips and sparks.

Standard equipment: Carrying case, mild steel blade, wrench, guide plate, ear plugs and safety goggles.

Specifications: 15-amps, (120V, AC only), 1,800 watt, 2,300 RPM, 9” blade diam-eter, 21/4” max depth of cut at 45°, 35/16” max depth of cut at 90°, 1” arbor, overload switch, 21 lbs. tool wt.


6+ MIX OR MATCH $325Slugger 9” metal cutting bladesMCBL09 1-4 5+ MCBL09ALM 1-4 5+ MCBL09SS 1-4 5+

Steel 1/4”-1/2” $88 $80 Aluminum $109 $99 Stainless Steel $112 $103Steel to 1/4” $99 $91

New, more powerful 350 WATT version of the world’s first oscillating tool. Thirty five percent increase in work progress over the previous model. Maximum speed consistency thanks to “tacho generator” elec-tronics. Seventy percent less vibration and fifty percent quieter than previous models.

This unique, incredible tool does not saw or grind – it oscillates. This function creates a whole new way to cut, scrape, polish and sand. For metal building applications, one can cut up to 20 gauge steel without burns, distortion and heat build-up.

Your painted panels will be left with a like-new factory cut. Think of this tool as a nibbler for details. It allows you to do extremely fine and delicate work or to be aggressive – depending on the acces-sory blade selected. This tool performs all of these functions and yet is safe to the touch. This small, light weight, easily manuverable

tool can perform the job in tight areas where other tools could not “make the cut.”

Standard equipment: 1 Universal E-cut blade 13/4”, 1 backing pad, 3 ea. sanding sheets (80, 120, 180 grit), 1 nylon bag.

Specifications: 3.6-amps (120V, AC only), 350 watt, 10,000-19,500 oscillations per minute - 2x1.7 degrees (=3.4), Quick-IN rapid change system, variable speed, 7 lbs. tool wt.


Pictured above cutting 20 gauge steel with optional accessory P/N #485 – you can see the fine quality of the resulting cut.

FMM 350QSLStart

With “Starlock” Snapfit

3 SecondTool Change

& No Loose Parts

71/4” Metal Cutting SawMCSL07Slugger Metal Cutter cuts steel as easily as plywood with a built in laser guide and light. Cuts faster, cleaner, safer and more affordable than other metal cutting equip-ment. The specially designed cover collects virtually all chips and sparks.

Standard equipment: Carrying case, mild steel blade, wrench, guide plate, ear plugs and safety goggles.

Specifications: 11-amps (120V, AC only), 1,400 watt, 3,800 RPM, 71/4” blade diameter, 19/16” max depth of cut at 45°, 27/16” max depth of cut at 90°, 20mm arbor, overload switch, 15 lbs. tool wt.


6+ MIX OR MATCH $245Slugger 71/4” metal cutting bladesMCBL0725 1-4 5+ MCBL0725ALM 1-4 5+ MCBL0725SS 1-4 5+

Steel 1/4”-1/2” $59 $54 Aluminum $70 $64 Stainless Steel $72 $66Steel to 1/4” $59 $54

CALL 800-821-5448 OR FAX 800-844-1199

CUT-OFF BLADES FORHAND HELD SAWS

High speed, reinforced (with strands of fiberglass) abrasive wheels for hand held saws are used to cut: concrete • asphalt • metal • compositional materials • pipe • thin gauge steel • cor-rugated roof deck.These are Type-1 style wheels which means their shape is

straight, that is the wheel would appear completely flat when layed upon a table top. Specify if you are cutting metal or concrete. Specify arbor size of 1” or 20mm.

ANY MIX*SIZE 1-9 10-40* 50+

12 x 1/8 $ 6.50 $ 5.85 $4.7514 x 1/8 11.70 10.40 8.60

*MUST BUY IN MULTIPLES OF 10

CHOP SAW BLADES

Three styles of chop saw blades to choose from: The Ultimate is an exceptional stud cutting blade and a superior general cutting

blade - a really great blade at a really great price. Stud King is best suited when cutting steel thinner than 1/8” thick. Iron Worker is best suited when cutting steel thicker than 1/8”.

PRICE PER BLADE STEEL BLADES 50ITEM THICKNESS PER BOX 1 BOX BLADES*

14 x 7/64 x 1 Ultimate 0-1/2” 25 $4.99 $4.5014 x 3/32 x 1 Stud King 0-1/8” 10 6.20 5.6514 x 7/64 x 1 Iron Worker 1/8”-1/2” 10 6.20 5.65

*MUST BUY IN BOX QTY. ADD 10% FOR LESS THAN FULL BOX

Super thin A60S abrasive wheels are specially formulated to cut fast and burr-free. Use to cut steel, pipe, rebar, channel and angle

iron. Available in Type-1 (use 5/8-11 reusable adapter for angle grinders) and Type-27 (use standard Type-27 flange for angle grinders). Max RPM is 13,300 for 41/2”, 12,200 for 5”, and 10,100 for 6”. (MO)

GRINDINGWHEELS

Use on right angle grinders. These are the Type-27 style wheels which mean that the wheel is straight except for the depressed center. Specify 7/8” arbor or 5/8-11 hub. Add $1 to the below blade price if you wish to order the blade with the 5/8-11 hub attached. Specify if grinding metal or concrete.

ANY MIX*TYPE 1-24 25* 50+

41/2 x 1/4 x 7/8 $2.22 $2.08 $1.756 x 1/8 x 7/8** 3.05 2.80 2.356 x 1/4 x 7/8** 3.95 3.55 2.957 x 1/4 x 7/8 4.88 4.44 3.719 x 1/4 x 7/8 7.29 6.64 5.53

*MUST BUY IN MULTIPLES OF 25 **ONLY AVAILABLE TYPE 27

TYPE-1 TYPE-27 ANY MIX* ANY MIX*SIZE 1-49 50* 100+ 1-49 50* 100+

41/2 x .045 x 7/8 $1.84 $1.54 $1.34 $2.09 $1.76 $1.545 x .045 x 7/8 2.34 1.98 1.69 2.46 2.09 1.796 x .045 x 7/8** 2.58 2.15 1.86 2.71 2.25 1.966 x 1/16 x 7/8 – – – 2.95 2.70 2.15

*MUST BUY IN MULTIPLES OF 50 **6” TYPE-1 IS .040”

.045” THIN CUTTING WHEELS

THIN DIAMOND CUTTING WHEELS

METALMAXTM blades by Lenox last up to 30 times longer than standard bonded abrasive wheels. Since it is a diamond wheel the diameter remains the same. These blades cut with less odor and reduced dust. Cuts Steel, Stainless Steel and Cast Iron.

PRICESIZE MAX RPM TYPE 1 TYPE 241/2 x .050 x 7/8” 13,200 $16.25 $19.956 x .050 x 7/8” 10,100 29.75 34.65

ABRASIVES


DIAMOND PRODUCTSDri Disc® Diamond Blades

Vanguard “Standard” grade blades provide low initial cost and solid performance.Banner Line is Target’s best selling line of “Quality” grade blades, good for most jobs.Premier Grade blades are for heavy duty sawing/high production.

DESCRIPTION PRICE4 x .065 Tacti-Cut S $144 x .085 Vari-Cut Turbo 264 x .080 Tacti-Cut Turbo 1441/2 x .065 Tacti-Cut S 16

DESCRIPTION PRICE41/2 x .080 Vari-Cut Turbo $4941/2 x .080 Tacti-Cut Turbo 167 x .065 Tacti-Cut S 347 x .080 Tacti-Cut Turbo 34

DESCRIPTION PRICE7 x 0.80 Vari-Cut Turbo $ 5610 x .100 Tacti-Cut Turbo 6712 x .118 VH5 7112 x .125 HS5 143

DESCRIPTION PRICE14 x .118 FLX $ 4914 x .118 Orange Crush 5914 x .118 VH5 8414 x .125 HS5 157

Diamond Core Bits

Concrete Saw Diamond Blades

Diamond Core bits are offered in banner line or millenium. Both styles have built-in threaded adaptors, provide a 14” drill depth and are available from 3/4” to 14” diameters.

BANNER TURBO COREDIA. LINE #B101” $ 63 N/A11/4” 65 N/A11/2” 74 N/A2” 92 $ 9721/2” 113 1193” 124 1304” 165 1736” 249 2618” 346 35610” 456 46912” 567 356

DESCRIPTION REG. PRICE SPECIAL

12 x .125 HS 5 $215 $13314 x .125 HS 5 250 15912 x .250 Professional L3 648 48614 x .250 Professional L3 696 522

DESCRIPTION REG. PRICE SPECIAL14 x .125 FLX230 Cured $374 $28114 x .125 FLX280 Asphalt 403 30214 x .110 Banner Line (Blue Med.) 453 34014 x .110 Banner Line (Gold Hard) 453 340

Concrete Diamond Blade Recommendation Chart

Materials

Crit ically Hard concrete with Rebar Reinforcing

Cured concrete with Hard Aggregate

Cured Concrete w/Soft Aggregate, or Semi-Cured Concrete

Green concete with Medium to Hard Aggregateor Asphalt over Concrete

Asphalt

GHSeries

(Standard)

GH5

GH5

GH9

GH8

BannerLine

(Quality)

Gold 150B

Blue 200B

Blue 300P

Red 450Bs

Black 500Bs

ProfessionalGrade

(Premium)

F710C

F730C

F740C

F700G

F700A

Size

12” to 36”Call

Dynamic Fastener

for detailed selection or availability

† Indicates Recessed Core undercut protection is standard on these blades. s Recessed Core Protection is recommended on these blades.

Hard/Dense

Soft/Abrasive

FLX

VH10

VH5VH5QH5

VanguardVH5

TurboTurbo

Tacti-Cut

Tacti-Cut

Vari-Grind

Vari-Cut Turbo

DT5HS5HI8

HS8FR3FR3

BannerV10

Vari-Cut Turbo

Elite-Grind

DTR5NXSHI10

HI5NXSNXS

HI10

TactTactii--CutCut

QH5QH5 FLXFLX

AP5AP5

CALL 800-821-5448 OR FAX 800-844-1199

D•F® STEEL CUTTING

D•F metal cutting saw blade for circular saws is the answer to your metal cut-ting needs. Never before has steel cutt ing been so easy and econom-ical! For any material to be cut, clamp-ing that material to eliminate wob-ble is important fo r both safe ty & cutting perfor-m a n c e . W h e n cutting aluminum, using a lubricant is REQUIRED for both safety and c u t t i n g p e r f o r -mance. Ok to use: wax, WD-40, cut-ting oil,... as the lubricant. Using a

lube to cut stainless is recommended for better cutting per-formance but is not required. “Stealth” blades are the next generation of the blade. Patented 2-piece blade construction dampens vibration and reduces noise–producing cuts that are smoother and quieter. The 5 P/N’s that begin with a * are Stealth blades. 16SP80 is designed & approved to cut foam insulated panels (sandwich panels) with thin gauge (no thicker than 18 gauge) steel surfaces using the Skil SPT70V-11 2,500 RPM or Makita 5402NA 2,200 RPM circular saw. DO NOT cut ANY other materials such as steel plates, angles, tubing or ANY OTHER material with the 16SP80 blade while on these two saws. WARNING! If you are using a blade (other than our 16SP80) to cut insulated panels and if that blade manu-facturer will not put in writing that the blade IS PERMITTED to cut insulated panels (as we did above) then you are need-lessly exposing your company to unnecessary and potential-ly very costly liabilities.** SPECIFY 5/8” OR 20MM ARBOR

P/N MAX MILD STEEL CUTTING NO MIXTEETH ARBOR RPM KERF APPLICATION 1-4 5+

53/8SP30B 10MM 3200 .059” 18 Ga. to 3/16” $31 $2853/8SP50B 10MM 3200 .055” 18 Ga. & Lighter 43 3953/8SP32 20MM 4300 .059” 24 Ga. to 1/8” 35 3261/4SP48 5/8” 5300 .079” 1/8” & Lighter 47 4361/2SP48 5/8” 3900 .079” 18 Ga. to 3/16” 47 4363/4SP40 20MM 3500 .071” 26 Ga. to 3/16” 47 4371/4SP38** 5/8”/Gor 20MM 5800 .079” 1/8” to 1/4” 49 45*71/4ST38 5/8” & G 5800 .079” 1/8” to 1/4” (Stealth) 65 5971/4SP48** 5/8”/Gor 20MM 5800 .079” 24 Ga. to 1/8” 49 45*71/4ST48 5/8” & G 5800 .079” 24 Ga. to 1/8” (Stealth) 65 5971/4SP56 5/8” & G 5800 .071 24 Ga. & Lighter 59 5471/4SP70** 5/8”/Gor 20MM 5800 .069” 26 Ga. to 29 Ga. 64 588SP48 5/8” & G 4300 .087” 24 Ga. to 1/8” 52 4781/4SP48 5/8” & G 5800 .087” 20 Ga. to 1/4” 55 509SP48 1” 2700 .087” 18 Ga. to 1/8” 79 7210SP50 1” & 5/8” 1900 .098” 20 Ga. to 1/8” 98 8812SP54 1” 2000 .087” 1/8” to 1/2” 98 8912SP60 1” 2000 .098” 20 Ga. to 3/8” 106 96*12ST60 1” 2000 .094” 20 Ga. to 3/8” (Stealth) 128 116*12ST80 1” 2000 .091” 20 Ga. to 1/16” (Stealth) 203 18514SP72 1” 1700 .094” 20 Ga. to 1/4” 169 154*14ST72 1” 1700 .094” 20 Ga. to 1/4” (Stealth) 187 17014SP90 1” 1700 .094” 29 Ga. to 1/8” 219 19916SP80 1” 1700 .102” Foam Insulated Panel 425 39961/260A 5/8” 2600 .079” 49 4571/460A 5/8” & G 8300 .079” 63 57860A 5/8” & G 7300 .087” 76 6981/460A 5/8” & G 7300 .087” 76 691080A 5/8” 5870 .094” 103 9410100A 5/8” 5870 .094” 112 10212100A 1” 5000 .110” 139 12514100A 1” 4300 .118” 179 1611278S/S 1” 2000 .087” 225 2071490S/S 1” 1700 .087” 250 2307BP5 5/8” & G 8000 .091” Fiber Cement Board 57 52

STEEL CUTTING CIRCULAR SAW BLADES®

SLASHER is a registered trademark of Dynamic Fastener Service Inc.

Use these eight blades when

cutting ALUMINUM,COPPER, BRONZE

or BRASS}

8” MetalCutting SawNo. 6370-21See pg 31 bottom/right box for full product details.

SPECIAL PRICE Call

8” Worm Drive MetalCutting SawNo. SPT78MMC-22FREE 8” 48T Slasher blade. See pg 35 top/right box for full product details.



Cuts Stainless - but ONLY303 or 304 S/S, only

1/8” to 1/4” thick}

165/16 ” Magnesium Super Sawsquatch™ WormDrive SawNo. SPT70V-11

See pg 35 top/middle box for full product details.


14” Metal Cutting SawNo. DW872FREE 41/2” grinder. See pg 26 top/left box for full product details.



Heavy-duty Stiff Palmyra fill Floor Sweeps are rec-ommended for wet or dry sweeping on rough con-crete or wood floors. Knot Style Roof Brush handles many tasks including hot tar mopping. Economy version for use with cold coating only. BLOCK TRIM 1-9 10+P/N SIZE LENGTH DESCRIPTION PRICE ANY MIX

42023 24 x 21/2” 4” Floor Sweep $17.40 $15.3044010 61/4 x 13/4” 31/4” 3 Knot Roof Brush 17.95 15.6036617 7 x 21/2” 21/2” Economy Roof Brush 5.20 4.5544019 Handle for floor sweeps: 8.65 7.60 15/16” x 5’ length, die-cast threads

FLOOR SWEEPS,ROOF BRUSHES,HANDLES

BENCH GRINDER BRUSHESDesigned for automotive, do-it-yourself, farm and hardware applications, Bench Brushes provide a medium brushing action for applications including paint, flashing and surface corrosion removal, and surface preparation. (RPM) BRUSH FACE TRIM ARBOR MAX. 1-9 10+P/N DIA. WIDTH LENGTH HOLE SPEED PRICE ANY MIX

36200 6” 1/2” 11/16” 5/8”, 1/2” 6,000 $16.10 $13.95DW4905 6” 7/8” 11/8” 5/8”, 1/2” 6,000 16.50 14.35DW4906 8” 3/4” 21/16” 5/8” 6,000 20.15 17.55DW4907 8” 1” 13/8” 5/8” 4,000 20.15 17.55DW4908 10” 11/8” 2” 3/4” 3,600 29.95 26.15

STEM MOUNTED BRUSHES with 1/4” shank. Heat-treated steel wire. A variety of shapes to accessorize your hand drill or collet-equipped air and electric power tools. (RPM) BRUSH WIRE TRIM MAX 1-9 10+P/N DESCRIP. DIA. SIZE LENGTH SPEED PRICE ANY MIX

DW4902 Knot End 1” .020 1” 20,000 $11.80 $10.2536248 Crimped End 1” .014 7/8” 20,000 7.50 6.5536208 Crimped Wheel 11/2” .014 3/8” 20,000 6.15 5.3536211 Crimped Wheel 3” .014 7/8” 20,000 8.80 7.65

CUP BRUSHES FOR LARGE ANGLE GRINDERS

Choose knot style for aggressive brushing action, and crimped for a superior finish. Heat treated steel wire, 5/8-11 arbor hole. (RPM) WIRE WIRE TRIM MAX. 1-9 10+P/N STYLE DIA. SIZE LEN. SPEED PRICE ANY MIX

DW4916 Knot 4” .025 11/4” 9,000 $21.30 $18.55DW4917 Knot 6” .025 13/8” 6,600 43.25 37.60DW49101 Crimped 4” .020 13/8” 9,000 14.50 12.60DW49102 Crimped 6” .020 11/2” 6,600 21.70 18.90

BRUSHES FOR MINI-GRINDERS5/8-11 threaded brushes feature heavy duty construction with heat-treated steel wire. Knot wheel features 3/8” face width; stringer bead - 3/16” face for root pass and confined application areas. (RPM) WIRE WIRE TRIM MAX. 1-9 10+P/N STYLE DIA. SIZE LEN. SPEED PRICE ANY MIX

DW4930 Knot Wheel 4” .014 7/8” 20,000 $14.25 $12.40DW4925 Stringer Wheel 4” .020 7/8” 20,000 14.25 12.40DW4920 Crimped Cup 3” .014 1” 14,000 13.75 11.95DW4910 Knot Cup 23/4” .020 1” 14,000 13.75 11.95

Zirconium flap discs combine grinding and finishing into one step. They cut costs over resin fiber discs by 15 to 1 and reduce operator fatigue. Other types, sizes and grits available on request. 1-9 10+P/N DIA. ARBOR GRIT PRICE ANY MIX342040 41/2” 7/8” 40 $5.45 $4.50342060 41/2” 7/8” 60 5.45 4.50342080 41/2” 7/8” 80 5.45 4.50343H040 7 “ 5/8-11” 40 12.25 10.15343H060 7 “ 5/8-11” 60 12.25 10.15343H080 7 “ 5/8-11” 80 12.25 10.15

ZIRCONIUM FLAP DISCS

These shims are an inexpensive leveling device aid. They won’t rust, rot, stain or leach concrete. They are uniform in thickness and horseshoe shims are color coded by thickness.

Length B

Width A

Thickness DGap Width

Color

Box Qty.

Price Per Box 1-5 boxes 6+ boxes

Engineering Specifications: • 10,000 to 12,000 PSI compressive strengthApply to all above series • Classed as slow burning with no toxic fumes • Coefficient of linear expansion is 3 to 5 x 10-5 inches/inch/°c

* 16 shims 1/16”-Sealed 1” High** 17 shims 1/16”-Sealed 11/16” High

#16 SHIM STACKHORSESHOE

WITH END SHIM

35/8” Excluding end shim

115/16”1/16”5/8”

Black

125 Stacks

$135.60

119.80

SERIES TSROUNDED CORNERHORSESHOE SHIMS

2” O/A 2” O/A 2” O/A

11/2” 11/2” 11/2” 1/16” 1/8” 1/4” 1/2” 1/2” 1/2” Blue Red Black

1000 1000 1000

$24.60 $49.10 $83.50

21.60 43.50 72.60

SERIES TLSQUARED CORNERHORSESHOE SHIMS

4” O/A 4” O/A 4” O/A

3” 3” 3” 1/16” 1/8” 1/4” 7/8” 7/8” 7/8” Blue Red Black

1000 1000 500

$174.80 $255.00 $214.30

153.80 225.00 188.80

SERIES LH

RECTANGULAR SHIMS

4” O/A 4” O/A 4” O/A

2” 2” 2” 1/16” 1/8” 1/4” None None None Black Black Black

1200 1200 720

$159.84 $262.80 $292.32

141.12 231.00 258.48

SERIES TMROUNDED CORNERHORSESHOE SHIMS

31/2” O/A 31/2” O/A 31/2” O/A

11/2” 11/2” 11/2” 1/16” 1/8” 1/4” 1/2” 1/2” 1/2” Blue Red Black

1000 1000 1000

$50.70 $83.50 $121.90

44.50 72.60 107.10

TS TM TL LH#16

B

D

A

SHIMS, ,

CALL 800-821-5448 OR FAX 800-844-1199

$424.84

518.75

194.81

$321.75

392.25

158.50

Bright, durable, and virtually indestructible; the 36” tall Wobble Light is a self righting, highly durable work light that takes a severe beating from workers, vehicles, debris, and drops. Internal ventilation system keeps the light cool enough to touch. String them in series or use individually.

No Set-Up. Just Plug It In.

175w Metal Halide - 15,000 hr bulb life, 1.6 amp draw, spare outlet plug, convection cooled.

400w Metal Halide - 15,000 hr bulb life, 3.6 amp draw, spare outlet plug, fan cooled.

85w Fluorescent - 10,000 hr bulb life, .8 amp draw, convection cooled.

WL175MH 175w Metal Halide Work Light 15000 Lumens 30-42 ft Range

WL400MH 400w Metal Halide Work Light 40000 Lumens 78-110 ft Range

WL J85F 85w Fluorescent Work Light 5000 Lumens 20 ft Range

PART # DESCRIPTION LIGHT OUTPUT LIST PRICE PRICE

Professional GeneratorThe XC6500 contains all the features a contractor requires:

• X Frame - fully wrapped heavy duty 12 ga. steel tube with steel lifting pocket

• Generac G-Force engine with Best-In-Class power and full pressure lubrication

• Full panel GFCI protection with covered outlets. OSHA compliant

• Low oil pressure shutdown protection

• True Power™ technology that provides clean and smooth operation of electronics and tools

• Never flat tires on steel wheels

• Fuel gauge built-in tank, capacity 8.5 gal./32 liter with a run time of 14 hours @ 50% capacity

• EPA/49 state CSA Canada compliant

AC RATED OUTPUT RATED 120/240 SHIPPINGPART # RUNNING WATTS VAC AMPERAGE WEIGHT PRICE

6823 6500 54.2/27.0 263 lbs. $1,979*California requires EPA CARB compliant model. Available by special order. Call for price.

WATTS=Volts x AmpsAllow 2 times the listed running watts of a tool for starting watts requirements.

CommercialGeneratorThe XT8000E is an Economy Generator for the contractor:

• Single touch electric start, battery included

• Generac OHV engine with splash lubrication

• PowerBar™ easily monitors power usage

• Controlguard™ provides added protection to the control panel

• Low oil shutdown automatically safeguards engine

• Idle control reduces noise and conserves fuel

• Full-wrap heavy-duty 11/4” steel tube cradle

• EPA/49 state CSA Canada compliant

• 20’ four outlet cord and first oil maintenance kit included

AC RATED OUTPUT RATED 120/240 SHIPPINGPART # RUNNING WATTS VAC AMPERAGE WEIGHT PRICE

6433 8000 66.6/33.3 230 lbs. $1,563*California requires EPA CARB compliant model. Available by special order. Call for price.

WATTS=Volts x AmpsAllow 2 times the listed running watts of a tool for starting watts requirements.

GENERATORS, , FIRE STOP


ELECTRICAL ACCESSORIES3 wire replacement cord ends.

15-amp/ 125V UL listed 1-5 6+MODEL PRICE PRICE#5984 Male End,Yellow Vinyl $4.40 $3.95#5985 Female End, Yellow Vinyl $6.90 $6.30

EXTENSION CORDSWe offer a full range of extension cords to meet the contractors’ needs. 1) “SJTW” is flexible to 35°F. Standard color is either orange or yellow but many other color combinations are available to special order. 2) “SJEOW” Polar/Solar® is flexible to minus 20°F. Standard color is yellow or blue. Most cords below are available with lit ends and locking connec-tor. All are UL listed and meet OSHA requirements.

WIRE # of 1-5 6+ 1-5 6+ GAUGE LENGTH OUTLETS PRICE ANY MIX PRICE ANY MIX

14/3 50’ 1 $ 24.95 $ 21.95 $ 34.90 $ 30.75 14/3 100’ 1 46.25 40.75 66.65• 58.70 12/3 50’ 1 37.60• 33.15 51.75• 45.60 12/3 100’ 1 63.95 56.35 94.85• 83.55 12/3 2’ 3 7.50 6.85 12.70 11.45 12/3 50’ 3 44.35• 39.10 60.60 53.40 12/3 100’ 3 73.25• 64.50 103.35 91.05 10/3 100’ 1 136.45 120.25 159.80 140.80

• Typically stocked with lit ends

POLAR/SOLAR“SJEOW”“SJTW”

Ground Fault Circuit InterruptersThree types of GFCI’s are stocked. They are rugged, all weather, UL listed and meet OSHA requirements. Both are rated 15 amps/120 volts/1,800 watts. The 2832 has a GFCI at the end whereas the 2841 is an inline style. Both models have lit ends. CORD CORD # of 1-5 6+MODEL # LENGTH GAUGE OUTLETS PRICE ANY MIX2832 2’ 12/3 3 $27.15 $24.402841 2’ 12/3 3 31.10 27.90

POWER DISTRIBUTIONCENTER

X-TREME BOX™ is a NEMA Type 3R rainproof power center. The platform has a closure protected by an e-coat and yellow exterior paint finish. The sled base is powder coated black. Advanced GFCI technology with open neutral and over-voltage protection. All receptacles are weather resistant.

Overload and GFCI Protection: 50A–none, 30A–circuit breaker, 20A–GFCI circuit breaker on each.

50A Power 50A Power 30A Power 20A Power Inlet Outlet Outlet Outlets (6) 50A 125/250v 50A 125/250v 30A 250v L6-30R 20A 125v 5-20R Locking with Locking with Locking with Straight blades Covers Covers Covers with Covers

PART # DESCRIPTION WEIGHT PRICE01970 6 GFCI outlet Portable Power Distribution Center 34 lbs. $39901918 50’ 6/3 & 8/1 SEOW 50A 125/250v extension cord 27 lbs. 22801919 100’ 6/3 & 8/1 SEOW 50A 125/250v extension cord 54 lbs. 373

DYNAMIC EXTENSIONCORDS

Does it appear to you that extension cords seem to “disappear” long before the cords usefulness has expired? We have the colorful answer that deters theft and minimizes innocent confusion of which sub owns which extension cord. We now offer our single outlet 12/3 round wire extension cords in 2 color varieties. 1) “SJTW-A” is flexible to 35°F in a highly visible lime green with lit ends. 2) “SJEOW-A” (Polar/Solar) is flexible to minus 20°F in a hot pink with lit ends. Both are UL listed and meet OSHA require-ments for outdoor use. POLAR/SOLAR “SJTW-A” “SJEOW-A”WIRE # of 1-5 6+ 1-5 6+GAUGE LENGTH OUTLETS PRICE ANY MIX PRICE ANY MIX12/3 50’ 1 $39.95 $35.95 $53.75 $48.5512/3 100’ 1 73.25 65.95 99.30 89.70

LED PORTABLE FLOOD LIGHTS

Compact, durable and extremely lightweight LED ProLight™ floods are jobsite ready. Features include •Pure white light •IP65 Rated •Cool operation •5’ integrated power cord •Suitable for use in all weather conditions •50,000 hour lamp life •UL listed. (EC)

P/N DESCRIPTION LUMENS HEIGHT PRICE411015 15 Watt Floor Stand Flood 1,440 9” $ 61.50411215 15 Watt Single Telescoping 1,440 2’-6’ 97.45 Flood W/Tripod411315 15 Watt Twin Telescoping 2,880 2-6’ 205.50 Flood W/Tripod

, FLOOD LIGHTS,

LED STRING LIGHTSEasily light up jobsite areas with super bright LED worklights. No bulbs or lamps to replace. These are UL 1088, FCC/ICES certified, and meet IP65 enclosure standards. Daisy chain up to 10 of the 100’ or 20 of the 50’ units. One light module every 10’.

PART # LENGTH LUMENS 1-5 6+EC7164 50’ 4,000 $126.99 $119.99EC7165 100’ 8,000 216.99 199.99

CALL 800-821-5448 OR FAX 800-844-1199

– VOLUME DISCOUNTS –BUY $250.00 OR 100 PCS. (ANY MIX) OF

DEWALT &/OR LENOX &/OR MILWAUKEE PRODUCT and WE WILL DEDUCT AN

ADDITIONAL 12% OFF OFTHESE ALREADY LOW PRICES.

PART LENGTH USED ON

TEETHPERINCH RECOMMENDED USE

PRICEPER

BLADE

* Including nail-embedded wood1) DeWalt is 3 TPI not 4 TPI 2) DeWalt is 10/14 TPI not 10 TPI

PRICEPER

BLADE

PRICEPER

BLADE

PRICEPER

BLADE

The Lenox Gold™ Titanium edge bi-metal recip blade lasts 240% lon-ger than the leading competitor and cuts much, much faster. The more cuts made, the greater the speed differen-tial. One independent test showed the Lenox Gold blade to be over 325% fast-er on the 28th cut as compared to three leading competitors.

, & RECIPROCATING BLADES

414R 4” 14 Metal Heavy gauge metal 1/4”-1/2”/6-13mm, $1.73 $2.00 $2.98 $1.79614R 6” 14 Metal hard rubber, fiber & angle iron. $1.91 $2.57 $3.57 $2.02

418R 4” 18 Metal Heavy gauge metal 1/8”-1/4”/3.2-6mm, $1.78 $2.00 $2.98 $1.79618R 6” 18 Metal conduit & tubing, opening wood crates*, $1.91 $2.57 $3.57 $2.02818R 8” 18 Metal removing wood siding or shingles. $2.86 $3.29 $4.57 $2.50

318RC 3” 18 Metal Contours – metals under 1/8”/3.2mm $2.38 $3.06 –– $2.48

424R 4” 24 Metal Metal & galvanized pipe 18 gauge $2.02 $2.26 $2.98 $1.79624R 6” 24 Metal & under. $2.04 $2.57 $3.57 $2.02

656R 6” 6 Wood Rough work in wood*, fast cutting, $2.33 $3.06 $4.26 $2.16956R 9” 6 Wood used in remodeling and demolition $3.26 $4.08 $5.66 $2.92156R 12” 6 Wood work. $3.88 $4.99 $6.93 $3.11

676RC 6” 6 Wood Wood contours. $3.24 $4.10 $4.88 $4.42

606R 6” 6 Wood Wood*, all composition material. –– $2.91 –– ––

610R 6” 10 Wood Nail free woods, fast cutting. $2.04 $2.57 $3.57 $2.02

314RC 3” 14 General Irregular contours, wood, compositions $2.38 $3.06 –– $2.50 Purpose and metal over 1/2”/13mm.

634R 6” 41 General Wood*, compositions, plastic, cast $2.821 $3.55 –– –– Purpose aluminum & non-ferrous metals.

636RP 6” 6 General Plaster, plaster board. $3.24 $3.48 –– $2.15 Purpose

810R 8” 102 General Wood*, compositions, plastic, cast aluminum $2.622 $3.29 $4.57 $2.76 Purpose light non-ferrous metals, stainless steel.

800RG 8” Medium General Hard to cut abrasive materials, –– $9.10 –– $6.28 Carbide Purpose fiberglass, ceramic tiles, cast iron pipe. Grit

110R 12” 10/14 General All woods*, plastic, cast aluminum & –– $4.99 –– $4.35 Purpose light non-ferrous metal, stainless steel.

650R 6” 10/14 Demolition Heavy gauge metal 1/8”-1/2”/3.2-13mm. $1.91 $4.02 –– $2.02 Situations including rescue operations.

966R 9” 6 Demolition Rough work in wood*, straight cutting, $3.88 $4.44 $9.06 $4.25 demolition work, rescue operations.

960R 9” 10 Demolition Heavy gauge metal 1/4”/6mm and above, $3.99 $4.44 $9.06 $3.85 straight cutting, demolition and rescue work.

L6110 6” 10 Demolition Heavy gauge metal 3/16”-1/2”/4.8-13mm. –– $4.24 –– $2.69L9110 9” 10 Demolition –– $5.31 –– $4.04L12110 12” 10 Demolition –– $6.37 –– $5.18

L6114 6” 14 Demolition Heavy gauge metal 3/32”-3/8”/2.4-9mm. –– $4.24 –– $2.69L9114 9” 14 Demolition –– $4.79 –– $4.04L12114 12” 14 Demolition –– $6.37 –– $5.18

L6118 6” 18 Demolition Heavy gauge metal 1/16”-1/4”/1.6-6mm. $3.29 $4.24 –– $3.05L9118 9” 18 Demolition –– $4.79 –– $4.04L12118 12” 18 Demolition –– $6.37 –– $5.18


HOLE SAWS 11/2” CUTTING DEPTH

NO. OF SIZE RANGE LENOX HOLE SIZED (HOLE SPECIALCODE PER BIT DIAMETER) PRICE

VB1 13 1/8” to 1/2” $35.80VB2 9 1/2” to 1” 62.60VB3 9 1/4” to 3/4” 54.90VB4 6 3/16” to 1/2” 41.75VB6 2 3/8” & 1/2” 35.05VB7 1 7/8” 61.95VB11 2 7/8” & 11/8” 84.05VB12 5 7/8” to 13/8” 95.95VB14* 1 3/8” 17.30

VARI-BIT ®

*WHILE SUPPLY LASTS

SHEET METAL CUTTING KITS• Slugger thin metal cutters produce accurate holes up to 3” diameter in sheet metal, light tubing, sheet plastics and more.

• Reduces or eliminates dimpling in thin metals vs. standard twist drills.

• Cuts mild steel up to 1/4” thick maximum, CUTS METAL THREE TIMES FASTER THAN HOLESAWS.• Using the RPM chart included with the kit each cutter will last hundreds of holes. ANY ANYMODEL # KIT INCLUDES 1-4 5+

SM000 Case, 1/2” & 5/8” arbor, pilot, $188 $173 11/8”, 13/8”, 13/4”, 2” and 21/2” cutters10205 Cutting Paste for metal cutting. $20.55/tube

HOLE SAWKITS


49-22-4005 8 pcs gnrl purpose $ 3949-22-4145 10 pcs plumber’s kit Call49-22-4095 10 pcs electrician’s kit Call49-22-4175 15 pcs gnrl purpose Call49-22-4105 19 pcs electrician’s kit Call49-22-4185 28 pcs gnrl purpose Call

SPECIAL P/N DIA. PRICE 9L 9/16” $9.89 10L 5/8” 5.35 11L 11/16” 5.35 12L 3/4” 5.35 13L 13/16” 5.35 14L 7/8” 5.35 15L 15/16” 5.35 16L 1” 5.65 17L 11/16” 5.65 18L 11/8” 5.65 19L 13/16” 5.65 20L 11/4” 5.65

SPECIAL P/N DIA. PRICE 21L 15/16” $5.65 22L 13/8” 5.96 23L 17/16” 5.96 24L 11/2” 5.96 25L 19/16” 5.96 26L 15/8” 5.96 27L 111/16” 5.96 28L 13/4” 7.47 29L 113/16” 7.47 30L 17/8” 7.47 32L 2” 7.47 33L 21/16” 9.18

SPECIAL P/N DIA. PRICE 34L 21/8” $ 9.18 36L 21/4” 9.18 38L 23/8” 9.18 40L 21/2” 9.85 41L 29/16” 9.85 42L 25/8” 9.85 44L 23/4” 9.85 46L 27/8” 9.85 48L 3” 10.09 50L 31/8” 10.09 52L 31/4” 10.09 54L 33/8” 10.09

SPECIAL P/N DIA. PRICE 56L 31/2” $10.10 58L 35/8” 10.95 60L 33/4” 13.40 64L 4” 14.80 66L 41/8” 15.83 68L 41/4” 20.95 70L 43/8” 24.68 72L 41/2” 29.04 74L 45/8” 43.36 76L 43/4” 32.22 80L 5” 35.81 88L 51/2” 72.93 96L 6” 50.08


600634 Arbor complete 1/2-18 UNF $20.75600637 Arbor complete 3/8-20 UNF 20.75600645 HSS Pilot bit only, 1/2” 6.55600648 HSS Pilot bit only, 3/8” 6.55

SPYDER RAPID CORE EJECT™With RAPID SWITCH™

Simply the most versatile, user friendly hole saw arbor avail-able. Quickly eject cores or change hole saws. Fits most hole saws on the market.

WhileSupplyLasts

MORE & BLADES

WhileSupplyLasts

CALL 800-821-5448 OR FAX 800-844-1199

T7404 4’ $137T7406 6’ 177T7408 8’ 233T7410 10’ 292T7412 12’ 349T7414* 14’ 487T7416* 16’ 564

DOUBLESTEPLADDERT7400 SERIESType 1AA 375 lb. rated.

Orange fiberglass.

MODEL SIZE PRICE

7404 4’ $111

7406 6’ 150

7408 8’ 205

7410 10’ 243

7412 12’ 299

FIBERGLASS7400 SERIES

Our most rugged, top of the line, Type 1AA, 375 lb. rated, step lad-der. Orange fiberglass.

MODEL SIZE PRICE404 4’ $112AS1006 6’ 128408 8’ 234410 10’ 279412 12’ 347414* 14’ 467416* 16’ 608

ALUMINUM400 SERIES

Type 1AA, 375 lb. rated, aluminum. *Type 1A, 300 lb. rated MODEL SIZE PRICE

6204 4’ $ 716205 5’ 886206 6’ 996208 8’ 1266210 10’ 1876212 12’ 230


Our most economical Type 1A, 300 lb. rated, step ladder. Orange fiberglass. MODEL SIZE PRICE

7303 3’ $ 847304 4’ 957305 5’ 1097306 6’ 1207308 8’ 1657310 10’ 2307312 12’ 281


Our middle grade Type 1AA, 375 lb. rated, step ladder. Yellow fiber-glass. MODEL SIZE PRICE

3 styles of 2-section D-rung extension ladders: 1) series D1500 is aluminum 2) series D6200 orange fiberglass is our most economical 3) series D7100 yellow fiberglass is our high grade.

After each price there is a code that identifies the rating for each individual ladder. (1) is type 1 rated 250 lbs (1A) is type 1A rated 300 lbs (1AA) is type 1AA rated 375 lbs.

SAFE-T LADDEREXTENSION

According to the US Bureau of Labor Statistics, 80% of all falls from ladders occur at the top of the ladder and 50% of falls occur while the worker is attempting to transition from the ladder to the second surface. The high danger level that the worker is subjected to is greatly reduced by using the Safe-T ladder extension. Use on ladders with side rails 3.5” x 13/8” and under.

Also, this item will allow workers to comply with OSHA 1926.1053(b)(1) which states: “When portable ladders are used for access to an upper landing surface, the ladder rails shall extend at least 3’ above the upper landing surface to which the ladder is used to gain access.”

PART # PRICE

#10800 Call

Currently we are transitioningour ladder inventory from

ALUM FBRGLS FBRGLSLENGTH D1500 D6200 D7100

16’ $199 (1A) $179 (1A) $281 (1AA)

20’ 230 (1A) 201 (1A) 318 (1AA)

24’ 280 (1A) 233 (1A) 363 (1AA)

28’ 338 (1A) 274 (1A) 397 (1AA)

32’ 396 (1A) 341 (1A) 465 (1AA)

36’ 485 (1A) 402 (1A) 767 (1A)

40’ 541 (1A) 473 (1A) 819 (1A)

48’* 741 (1) – –

D6220-2

FIBERGLASS PODIUM LADDER PD6200 SERIES

Type 1A 300 lb. rated ProtopOrange fiberglass.

MODEL SIZE PRICE

PD6206 6’ $207PD6208 8’ 264PD6210 10’ 318*FXP1712 12’ 393

*FXP1712 is a platform style

* 48’ Aluminum is Louisville ladder

to

*300 lb rated.


STEP EXTENSION SCAFFOLD SHIPPINGMODEL# HEIGHT HEIGHT HEIGHT WEIGHT PRICEMT-13 3’-5’ 7’-11’ 23” 32 lbs. $177MT-17 4’-7’ 9’-15’ 35” 40.2 lbs. 222MT-22 5’-9’ 11’-19’ 46” 47.9 lbs. 275

MULTILADDEREasily convert this to: twin stepladder, stairway ladder, extension ladder or 2 scaffold bases (requires plank and tie downs). Type 1A duty rat-ing 300 lbs. load capacity per side.

• Double riveted steps for durability• Slip-resistant feet• Extra wide flared bottom allowing firm support• Telescoping design for maximum versatility• Tested to ANSI applicable codes

LEANSAFE® X33 IN 1 MULTI-PURPOSE

LADDEREasily changes from a step ladder to a straight ladder in one adjustment. Features include a one handed lock and non-marring top to protect work surfaces. Type 1AA 375lb duty rated with compact rear rails to fit between framing studs. Lightweight at 24.1 lbs.

STEP LADDER STRAIGHT LADDERMODEL# HEIGHT HEIGHT PRICELDP7306 6’ 9’ $189

LEANSAFETM

DUAL USE LADDERType 1A 300 lb. rated step or lean ladder. Front and back rails are differ-ent colors signifying a LeanSafe lad-der. Single latch rail locks, non-mar-ring foot pads and riveted non-mar top bumper. Use free standing against poles, walls and in corners.

MODEL SIZE PRICEL6204 4’ $ 81L6206 6’ 104L6208 8’ 136L6210 10’ 199L6212 12’ 242

SRS SERIES SCAFFOLD

Shown right the ST series features:• One person set up• Height adjustable in 2” increments• Locking pins prevent accidental unlocking• Deck pin to secure platform• Fits through 30” door frame• 5” locking casters (250# capacity ea.)• Stackable*

*OSHA limits these to a maximum 15’ height. Do not stack higher than 2 units totaling 12’. When stacking OSHA requires optional handrail and outriggers. WEIGHT MAX PLATFORMPART # WIDTH LENGTH CAPACITY HEIGHT PRICE

SRS-72 291/2” 733/4” 1000 lbs. 747/8” $275SRG-72 Handrail package 6’ (set of 2) 176SRO-72-4 Steel Outrigger package (set of 4) 48

PORTABLE SCAFFOLDThis versatile scaffold can be used as a work bench, push cart or storage shelf. Features heavy duty mar-resistant locking casters and S-hooks that are Tool Lanyard ready. Comes with a 2 planks, an extra wide 10” and stanard 6”. 250 lb rating per plank (500 combined) yet weighs only 60lb.

O/A O/A O/APart # Width Length Height PricePS-48 251/2” 46” 501/8” $163

PORTABLE WORK STANDVersatile. This item can act as: Plank/Stage support, double step-ladder or sawhorse. 30” wide top step. Aluminum. Type 1, 250 lb rated. Note: When used as a double step-ladder, the maximum total load PER SIDE shall not exceed 250 lbs. Color blue. OSHA. UL Listed. ShippingMODEL SIZE WT (lbs) PRICETW372-30 2’ 12.5 $121

TW373-30 3’ 17.5 157TW374-30 4’ 24 203

WORK STANDS & SHOVELS

CALL 800-821-5448 OR FAX 800-844-1199

Engineered to provide strong tack andadhesion to a wide range of substrates,Avery Dennison AFB tapes:

- Bond dissimilar materials- Expand and contract with environmental conditions- Resist contraction and expansion due to thermal stress- Help provide joint strength and flexibility when bonding metal panels for curtain walls or room dividers (HB)

Please refer to Tapes.AveryDennison.com for complete terms and conditions, including warranty terms, relating to this product. You should periodically review the site as terms and conditions are subject to change without notice.

© 2013 Avery Dennison Corporation. All right reserved. Avery Dennison® is a registered trademark of Avery Dennison Corporation. Avery™ and all other Avery Dennison brands, product names or service programs are trademarks of Avery Dennison Corporation. (HB)

Handi-Foam® E84 is designed to stop air infiltration and complete the building envelope by filling and insulating large voids and surfaces. The kits come complete with the patented Handi-Gun® Dispensing Unit for precise and accurate application. Handi-Foam E84 is available as a II-205 or II-605 board foot kit. Handi-Foam E84 formula is available in a 1.75 lb/ft3 density and provides an aged R-value of 6 at one inch thick. Handi-Foam E84 conforms to ASTM 84 as a Class 1 system (flame spread of 25 or less, smoke development of 450 or less). Handi-Foam E84 fully expands and dries tack-free within 30-60 seconds, can be cut in 2-5 minutes and fully cures within 1 hour. A GREENGUARD certified product. (HF)

Super-heavy-duty (3.0 mil thick!) poly bags can take just about anything that you throw in them. That includes the heavy stuff like lumber scraps, sheet rock, plumbing pipe,…42 gallon capacity per bag. 33” x 48” bag dimensions. Two box styles are stocked; 1) bulk box of 100 bags, five rolls of 20 bags per roll and 2) handy pop-up dispensing box

(like a Kleenex box) with one roll of 20 bags. These 3.0 mil bags are 2-3 times thicker than what many hardware stores sell as their “super-duty” bag. Contractors need our 3.0 mil bags. You will notice and appreciate the tremendous quality of these bags. (TT)

BOX BAGS/ 1-4 5-9 10+PART # STYLE BOX BOXES BOXES BOXES

BAG20 Pop-Up 20 $23.10 $21.30 $19.55 Dispenser

BAG100 Bulk 100 $80.75 $74.85 $69.40

10” Twist ties. 15 ties/gang. 15¢/gang.

CONTRACTOR QUALITY

CLEAN-UP BAGS

You are now able to use our D•F super-thick, high quality plastic bags around your shop. In exchange for you granting us the honor of having our D•F bags used at your shop, we will sell these bags to you under our actu-al true costs. If you will buy in full box quantity, then we’ll sell them to you at our cost plus a small adder for internal freight & such that is less than our actual overhead - as per below. Any “full-case” purchased is cheap, under $75. Must buy in full pak or case qty. (ZZ)

Price/Each BagPLASTIC BAG CASE 100 FULLDESCRIPTION THICKNESS QTY PAK CASE

4.4x6” Zipper 4.7 mil 1,000 $.088 $.0734.4x8” Zipper 4.7 mil 800 .100 .08310x12.4” 1-side open 6.0 mil 300 .23 .19

D•F® PLASTIC

BAGS

PLASTIC BAGS, HANDI-FOAM, HIGH BOND TAPE

Over 200 photo credits; Cathay Studios - WBW&M


CORRUGATED CLOSURES Polyethylene foam closures are the ideal answer to keeping the outside weather, outside. They are a 1” wide strip, from 25” to 38” long, cut to the exact profile of the panel. Once inserted between the panel and sidewall or panel and ridge cap, they will keep out unwanted wind and weather and deter critters from entering the building.

Our charcoal gray closures are made of 2 lb. crosslink polyethylene foam, for strength, uniform compression and to eliminate shrinkage. Most have interlocking dovetail joints which will stop gaps from forming and speed installation with no clo-sure sag-out. Specify with or without peel and stick adhesive when ordering.

When ordering, be sure to specify inside (used under the panel, typical roof panel/sidewall application) or outside (used on top of panel, typical roof panel/ridge cap application).

Universal Closures: Also stocked are 1” x 1”, 1-1/2” x 1-1/2” and 2” x 2” soft foam universal closures in 25’ rolls. These compress to fill gaps where standard precut closures cannot easily be used.

STRUCTURAL SEALANT M-1 is a multipurpose structural sealant designed for difficult bonding and sealing applica-tions on low-slope commercial roofing. It bonds aggressively to metal flashing details, many types of coated metal, EPDM, PVC, BUR, SBS mod bit, granulated APP, coal tar and FRP. M-1 is excellent for underwater emergency repairs. M-1 is a tough thermosetting adhesive that can be used to permanently bond structural assemblies such as coping, metal edge and skylights. It is capable of bonding steel deck to bar joists and metal sandwich panels to wall and roof purlins. A non-slump, self-fixturing mastic that cures to a durable rubber bond with exposure to atmospheric moisture. It develops 300 lbs. per square inch of shear strength on metal, mason-ry or wood. Has 300% elongation and can accommodate dimensional changes in construction materials down to minus 20°F. It is solvent free. It can safely be used in confined spaces and also bond solvent-sensitive materials such as expanded polystyrene foam (EPS). Twenty four 10.3 oz. cartridges per case. Available black, grey, limestone, tan and white. 1-23 CASES CASES24 TUBES PER CASE TUBES 1-4 5+

M-1 STRUCTURAL SEALANT $11.85/tube $9.65/tube $8.70/tube

3 of the more popular stocked Closures

Fits 2.67” Corrugated, UC600S

Fits 7.2” Corrugated 11/2” Rib, Classic Omega

Fits 3/4” Hi-Rib, Grand Rib III, Builtite, Max-Rib and more

Peel & Seal is a 45 mil. puncture and tear resistant surface roofing membrane. Used to repair gutters, valleys and low slope metal roofs. Self-seals around most punctures and won’t dry out. The aluminum surface reflects heat and requires no coating.

Each case contains 100 sq. ft. in 331/2 ft. long rolls. Other widths are available. Available in white, call for price.

ALUMA-GRIPREPAIRING

TAPE Aluma-Grip™ is a heavy duty, pressure sensitive, all weather tape that has an aluminum foil backing with a modified Butyl rubber adhe-sive that provides an instant water resistant bond on most surfaces. The aggressive tack assures a positive instant seal that conforms to surface variations and irregular areas. The backing is 2 mil aluminum. The adhesive is 33 mil modified Butyl rubber. Rolls are available 2” to 12” widths, 50’ long.

APPLICATIONSIn roofing use it for:Penetrations • Hips • Ridges • Valleys • Walls• Vent Stacks • Roof Drains • ChimneysOther Applications• Various metal building sealing applications• Indoor and outdoor low, medium and high pressure HVAC duct systems• Trailer Repair

4” x 50’ (if bought in case lot of 12 rolls)

$34.95/roll**Quantity Price Available

ROLL ROLLS CASE PRICE* ROLL PRICE** WIDTH PER/CS UNWRAPPED WRAPPED

4” 9 $140.95/cs $17.50/roll 6” 6 140.95/cs 26.25/roll 9” 4 140.95/cs 39.40/roll 12” 3 140.95/cs N/A

*Sold in full case only, quantity price available.**Sold per roll, quantity price available.

COBRA, CLOSURES, SEALANTS

UNIVERSAL VENT Universal Vent is a polyester-based ventilation product for roof ridge applications. It won’t absorb moisture which can freeze and block ventilation. Works on panels with rib heights up to 3/4”. Made from recycled material, it is ideal for all climate changes. Flame-resistant, clog-resistant and tear-resistant.

Specifications

• Air permeability: >760 CFM• Tensile strength: 16 PSI - Elongation 175%• Compressive strength: 1.8 PSI @ 75%• Temperature range: -70°F to 212°F• Stocked in 1” x 3” x 50’ rolls

CALL 800-821-5448 OR FAX 800-844-1199

HAND STAPLERSP6C-6 (Use STCR2619 Staples) ....................................................... $39.95 $36.50P6C-8 (Use STCR5019 Staples) ....................................................... 39.95 36.50P3 (Use SP19 Staples)................................. 21.70 20.40H30-8 Hammer Stapler (use STCR5019 Staples)............................ 50.30 46.40

STAPLESPrice Per Box of 5M StaplesSTCR2619 1/4” or 3/8” Staple (use with P6C-6) .......................................... $13.20 $11.40STCR5019 1/4” or 3/8” Staple (use with P6C-8) .......................................... 13.90 12.05

SP19 1/4” Staple (use with P3) ...................... $4.65 $4.30

1-5______ 6+______

1-19 Bx______ 20+ Bx______

1-39 Bx______ 40+ Bx______

STAPLES & STAPLERS3 Different Bostitch Hand Staplers and 5 different Bostitch Staples are

Stocked. Typical Use is to Staple the Seams of Blanket Insulation

PC6

1585 CWContractor Sheathing Tape

Primary Use: Used on all exterior gypsum sheath-ing boards and house wraps as a vapor barrier on seams. May be used in all types of weather condi-tions including cold weather down to -10°F.

Size: 17/8” x 165’

$13.30 per roll for full case of 16

1537 WMP-VRWhite metalized polypropylene/scrim/kraft lamina-tion tridirectionally reinforced. U.L. listed.

Primary Use: Closure system and vapor seal on Lamotite 2805 and Lamtec WMP-VR faced thermal insulation.

Size: 3” x 150’ roll


491 FSKFoil/Scrim/Kraft tridirectionally reinforced with 2x3 sq. in. fiberglass scrim. U.L. listed. ASTM C1136.

Primary Use: Vapor seal on FSK faced fiberglass ductboard and blanket systems.

Size: 2” or 3” x 150’ roll.

2” wide is $12.35 per roll for full case of 24

3” wide is $17.65 per roll for full case of 16

1531 WMP-10White metalized polypropylene/scrim/kraft lam-inated facing with 4x4 sq. in. tridirectional scrim reinforcement.

Primary Use: Closure system and vapor seal on Lamtec WMP-10 faced thermal insulation.

Size: 3” x 150’ roll


1700 FOAMGray, closed cell foam tape. Adhesive on 1 side.

Primary Use: Vapor seal where large spaces occur, and as a lap joint seal in corrugated metal building panels or pre-fabricated wall panels.

Size: 1/4” x 50’. 3 widths: 3/4”, 2” or 3”.

1/4 x 3/4” is $10.80 per roll for full case of 16

888 STXSTX means Super Tack Xtra strength. Very similar to 888 SSL except the 888 STX has twice the adhesive (6 mil vs 3 mil thick). Hence, STX has 170 ounces of peel strength while the SSL has 83 ounces of peel strength.

Primary Use: Use STX when dealing with cold, moist or any other difficult bonding application. Press tabs or temporary holding.

Size: 1” x 180’


375 EWVEmbossed white vinyl.

Primary Use: Seaming vinyl faced insulation in metal buildings and for water heater blanket instal-lation.

Size: 3” x 150’ roll.


488 ALUMINUMSmooth Dead Soft Aluminum in 1.5 or 2 mil.

Primary Use: Improved vapor sealing of fiberglass duct board, duct wrap, foil faced insulation and FSK systems.

Size: 1.5 mil 2” x 150’ roll or 2 mil 3” x 150’ roll.

1.5 mil 2” wide is $11.20 per roll for full case of 24

2.0 mil 3” wide is $18.10 per roll for full case of 16

594 CW4 mil thick acrylic transfer film tape. Also known as “booger” tape. U.L. 723 Classified.

Primary Use: For use in high stress bonding appli-cations. High peel, tack and sheer properties. Fills surface non-uniformities and provides a permanent bond on foams, plastics, metals and compos-ite materials. Excellent UV and heat resistance. Service temperature -40° to 300°F.

Size: 11/2” x 180’


888 SSLSelf-sealing lap of polyester film, coated on both sides with an extremely aggressive adhesive.

Primary Use: Press tabs or temporary holding. High performance insulation mounting and splicing of wide width insulation facings during lamination.

Size: 11/2” wide. 2 lengths: 180’ and 450’

180’ is $11.40 per roll for full case of 32

450’ is $32.20 per roll for full case of 8

INSULATION TAPE, HAND STAPLES & FOIL FACED REPAIRING TAPE


ELECTRICAL TAPEA general purpose f lame retardant PVC tape. Uses include wire splicing, har-ness wrapping, or weather proofing outdoor connections. It’s UL listed, 7 mil thick, has 175% elongation and tensile of 19 (lbs/in.). Stocked in black, white, red, blue, green and yellow. 3/4” x 66’ per roll. P/N IT707.

ROLL ROLLS PRICE PER ROLLSIZE PER CASE BROKEN CASE FULL CASE3/4” x 66’ 24 $1.51 $1.29

DUCT TAPEChoose either economy grade (SE171) or contractor grade (SE141) duct tape. SE171 has two mils of poly backing and is 81/2 mils in total thickness with acrylic rubber adhesion. SE141 has 21/2 mils of poly backing and is 10 mils in total thickness with a natural rubber adhesion that grabs quick and won’t release in cold weather. Silver backing. 2”x180’ per roll. 24 rolls per case. (IT)

ROLLS ROLLS ROLLSP/N GRADE 1-23 24-216 240+

SE171 Economy $6.55 $5.70 $5.30SE141 Contractor $7.95 $6.85 $6.35

Insulation PinsTYPICAL USE: To attach insulation to metals, galvanized duct work or non-weldable surfaces, such as masonry, glass or wood used on side walls or ceilings. See line art below. (IP)

The system consists of a 12 gauge nail assembled to a 2x2x.015” plate, adhesive, and a 11/2” O.D. round washer. Available in lengths from 3/4” to 121/2”.1) Clean and dry the non-painted surface.2) Apply a 1/16” film of hanger-adhesive to

the hanger plate.3) Quickly press the hanger into position

with a twisting motion. Pins to be 12” o/c or closer.

4) After allowing the adhesive to dry (at least 24 hours) hang the insulation and secure with a weld-pin washer. Snip pin flush to washer.

61/2” long pin w/2x2 plate . . . $273.30/m

11/2” O.D. 12 gauge round washer. . . . . . . . . . . . $48.80/m

Hanger adhesive, 1 gal. pail (may ship UPS ground) . . . . . . . . . . . . $66.50

6”

12”

24”

EXTERIOR INSULATION SCREWS AND INTERIOR INSULATION SCREWS

• Insulation fasteners come in lengths of 17/8”, 23/8”, 31/4”, & 4”. They are a #12 diameter with a 5/16” A.T.F. hex head.

• Use the proper length fastener to fasten rigid insulation from 7/8” to 3” thick.

• Fastener length of X attach Y thicknesses of rigid insulation such as; 17/8” attaches 3/4” to 1”, 23/8” attaches 11/8” to 11/2”, 31/4” attaches 15/8” to 23/8”, 4” attach-es 21/8” to 3”.

• For optimum fastening, these insulation screws have 12-14 (#12 diameter, 14 TPI) threads near the drill flute for proper attachment to red iron and have 14-10 (#14 diameter, 10 TPI) threads near the screw head for proper attachment to the light gauge sheet metal skin.

• When fastening 0-3” of blanket insulation, use a 12-14x11/4 H.W.H. T-3. When blanket insulation is 3-6” thick a 12-14x11/2 T-3.

• Dyna-Coat® 1,000 hour salt spray premium coating.

INSULATION PINS & TAPES

CALL 800-821-5448 OR FAX 800-844-1199 Drop-Stop® and the symbol “NO DRIPS INTO A BUCKET” areRegistered trademarks of Dynamic Fastener Service, Inc.

LEAKY METAL ROOF?LEAKY METAL ROOF?

White Drop-Stop is stocked in: 20 oz. sausage packs, 1 gallon

pails, 5 gallon buckets and 55 gallon drums.

A severe horizontal seam, before and after application of Drop-Stop®.The repair and maintenance of metal roofs has never been easier or more effective. Using Drop-Stop® on roof seams, fasteners, and other roof joints water tight sealing can be accomplished effectively and economically. Simply apply Drop-Stop® in a heavy bead over end laps and vertical seams, or in a dollop over defective fasteners. Drop-Stop® is a brush-grade mastic with unique physical properties. Unlike most asphaltic or acrylic coatings, Drop-Stop® will not crack or become brittle over numerous freeze/thaw cycles.

This unique material actually stretches and recovers to bridge roof joints in which thermal movement can be expected. With 1500 PSI Tensile Strength and 600% Elongation capabilities, Drop-Stop® can single-handedly tackle most metal repairs.

Drop-Stop® is typically stocked and purchased as white in color. Clear Drop-Stop® is also stocked for skylight panel restoration. White Drop-Stop® is U.V. stable but clear Drop-Stop® is only moderately U.V. stable.

PHYSICAL PROPERTIES OF WHITE DROP-STOP®: dry to touch: 2-3 hours • fully cured @ 72°F: 3 days • elongation (ASTM D-412) @ 77 F: 600% • recovery from 600% elongation: 99% • recovery from 100% elongation (ASTM D-412): 100% • tensile strength (ASTM D-412): 1500 PSI • permeability, water vapor (ASTME-96): 0.15 • color stability: excellent • resistance to sunlight: excellent • resistance to chemicals: excellent • weathering effect: slight chalking • adhesion to aluminum (ASTM 3359-80): 5 (highest rating) • adhesion to steel (ASTM 3359-80): 5 (highest rating) • cold temperature flexibility: excellent • abrasion resistance: excellent • resistance to foot traffic: excellent.

BEFORE AFTER

A factory sealed unopened can of Drop-Stop has more than a 5 year shelf life if stored in moderate temperatures. The relative freight cost of shipping Drop-Stop in quantity via LTL truck is much more cost effective than shipping 1 or 2 units at a time. Plus, our packaging costs are quite high when we ship 1 or 2 units at a time. For these reasons, please consider buying in quantity to stock Drop-Stop which will save your company substantial money in the long run.

DROP-STOP CASEPACKAGING SIZE COLOR QTY 1 2* 6* 12* 36*

1 Gal Pail White or 2 $ 54.40 $ 49.40 $ 46.95 $ 44.40 $ 41.40 Clear5 Gal Bucket White 1 199.00 192.00 185.00 178.00 175.0020oz Sausage White 12 15.85 12.50 12.25*Must buy 1 Gal pail & 20oz sausage in case qty to achieve price break.

NEW! DROP-STOPin 20 oz. sausage packs.

$12.50/e in case lots of 12.

D•F® DROP-STOPDROP-STOP®®

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Flash and the symbol “NO DRIPS INTO A BUCKET” are Registered trademarks of Dynamic Fastener Service, Inc.

PREP WORK: before applying Drop-Stop® the roof must be free from grease, dirt, moisture, and all foreign products. Using a power washer works best. But for small repair jobs one could use a brush and water (repeatingly if necessary) until the targeted repair area is properly clean. Remember to let dry before applying Drop-Stop®. Apply Drop-Stop® in a temperature range of 40° to 120°F. After application, Drop-Stop® has a service temperature range of -40° to 180°F.

6. Allow the repair to set for 2-3 hours before finish coating with Dyna-Flash®. For maximum longevity, finish coat the repair area with Drop-Stop®. Dyna-Flash® is not protected from U.V. rays but Drop-Stop® is protected from U.V. rays.

5. While still wet, polyester membrane is then carefully embedded into the Dyna-Flash®. Note: the polyester has a shiny and dull side, apply shiny side up. Use a soft bristle brush to smooth out any wrinkles or voids in the mem-brane.

4. On roof repairs which cannot be easily bridged with a brush grade mas-tic like Drop-Stop®, Dyna-Flash® should be used with polyester membrane. For best results, Dyna-Flash® is applied with a trowel over loose seams or holes in the roof deck.

3. A plastic water bottle is an ideal application tool when applying Drop-Stop® over fastener heads. For seam openings of 1/8th of an inch or less, apply Drop-Stop® in a heavy bead, using approximately 1 gallon per 75 linear feet. (75’ long by 12” wide).

2. Always remove dirt and debris from the area to be repaired. Residual rust should be removed with a wire brush. Grease or oil deposits should be removed with mineral spirits or similiar solvent. Always allow the roof to dry thoroughly before coatings are applied.

1. Badly corroded fasteners should be replaced with a larger sized fasten-er to assure strong adhesion to the surrounding metal. Also, large gaps between roof panels should be made flush using self tapping screws.

BASIC REPAIR METHODS WHEN USING DROP-STOPDROP-STOP® COATINGS:

The Drop-Stop® family of synthetic rubber coatings provide metal roofing solutions in spray, brush and trowel grade viscosities.

Always inspect the roof to determine the best combination of materials for the repairs at hand. While most repairs can be handled with only Drop-Stop®, a brush grade mastic, larger gaps may require Dyna-Flash® with polyester rein-forcement (see details below). For roofs with light surface rust throughout the roof, Dyna-Seal roof coating can pro-vide a total covering to protect the metal’s long-term integ-rity. From spot repairs to full system applications, Drop-Stop® products provide a long-term, economical solution to your metal roofing needs.

D•D•FF® DROP-STOPDROP-STOP® ®

CALL 800-821-5448 OR FAX 800-844-1199

Sikaflex® 201 (smooth) and Sikaflex® S116 (textured) are our two most popular sealants as pictured left. 201 and S116 are an odorless industrial polyurethane sealant that exhibits a user friendly 12 month shelf life vs many competing poly-urethanes having just a six month shelf life. Their tack free cure time is three times faster than other leading brands allowing quicker opportunities to paint over the product if needed and lessens the chance of airborne particles to accu-mulate on work. Cures to a tough, dura-ble elastic consistency with excellent cut and tear resistance. Adheres in most cases without a primer to aluminum, sil-

conized polyester painted metals, and other metals, glass, wood, tiles, fiber reinforced plastics, and similar materials. Exhibits high recovery (700% elongation at break) making it ideal for sealing dynamically moving joints. Self leveling sealant also stocked in 1CSL limestone.BASIC USES: Sealing and caulking critical SSR endlaps, exterior joints around roof curbs, roof jacks, skylights, smoke vents, air conditioning equipment, curtain wall joints, and for perimeter caulking of windows and doors.COLORS OF 201: White, aluminum gray, black, tan and Metal Building Bronze (custom colors available – 150 gallon mini-mum).APPLICATION: They are a one-component flexible polyurethane based non-sag system applied with conventional caulking equipment. One 10.3 ounce cartridge yields 24 lineal ft. of 1/4” x 1/4” joint, with a curing rate to tack-free of 4 to 8 hrs. at 73° and 50% relative humidity.PROPERTIES: Meets Federal spec TT-S-00230C, Type II Class A ASTM C920-79, Type S., Grade NS, Class 25 USDA, FDA and NSF approved.

SIKAFLEX 201 or S116 $4.75/TUBE – IN CASE LOTS OF 24 TUBES

SIKALASTOMER®-511 NON-SKINNING BUTYL

SEALANT FOR STANDING SEAM ROOFS

Sikalastomer®-511 is a high solids, non-hardening, non-drying, non-ox-idizing butyl rubber-based sealant designed for portable and factory rollformers to seal the female lip of standing seam roof and wall panels, and concealed endlaps. It has excel-lent adhesion to oily GALVALUME®, KYNAR 500®, aluminized metal, ZINCALUME®, siliconized polyester and polyvinyl fluoride painted metals. Available in 10.5 ounce cartridges or 5 gallon plastic pails. Color is off-white.

BACKER-ROD JOINT FILLERBacker-rod is the ideal backup material for sealants where a joint filler is necessary prior to sealant application. Joint fillers have two major func-tions: 1) to control the depth of the sealant in proper relation to joint width and 2) to provide a backing against which the sealant is applied, filling the joint from the bottom and forcing the sealant to the sides. Among the many types of joints in which backer-rod is used are:• metal panels • precast panels • coping joints • expansion joints • perim-eters of door frames • perimeters of window frames • glazing joints.Backer-rod is available from 3/8” diameter to 4” diameter.*The diameter of the backer-rod to use should be approximately 25% larg-er than the width of the joint. (JF)* Closed cell backer rod is stocked 3/8” - 21/2”. Soft rod hybrid rod is stocked 3/8”, 5/8”, and 7/8”.

SIKAFLEX® S116

SIKAFLEX® 201

SIKA SEALANTS & BACKER ROD


Titebond® WeatherMaster™ Metal Roof Sealant is specifically formulated to outperform all other sealant technologies, including silicones, tri-polymers, and polyurethanes. This superior polymer formula provides a waterproof seal against water, wind, dust and dirt. It offers exceptional adhesion to Kynar™ coated metal materials, along with standard metal, aluminum, steel, galvanized bonderized surfaces, plastics and glass. The product is ideal for use on a wide variety of metal roof, trim, architectural metal siding, aluminum, galvanized steel, galvanized gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, brass and other common building substrates. We stock 58 of Titebond’s 62 colors, all of which match today’s popular metal roof and

metal siding colors, regardless of the material or manufacturer. If touch-ups are necessary, it is paintable in one hour after application. It extrudes in extreme weather conditions (down to zero degrees Fahrenheit) and is UV-resistant, making it the ideal choice for exterior applications. It will expand and contract with the change of weather and temperature and will not crack. This sealant contains no solvents or isocyanates and is VOC-compliant. Can NOT combine colors to get to one full case. CAN combine full cases of different colors to get to 10 case price. 12 tubes per case.

1 CASE $4.65*/TUBE 10 CASES $4.40*/TUBE(12 TUBES) (120 TUBES)

*MUST buy any color in full case of 12 tubes or 30% upcharge.

GUTTER & SEAM SEALANTWeathermaster™ Gutter & Seam sealant provides a highly weather-resistant seal against water, wind, dust and dirt. This advanced polymer sealant remains flexible for years with a joint movement capability of 25%. It is formulated specifically to seal aluminum, galvanized and vinyl clad gutters or downspouts. VOC compliant in all 50 states, freeze thaw stable and paintable after 1 hour.Application Temperature: Above 0°F (-18°C)Service Temperature: -75°F to 300°F (-59°C to 149°C)Meets: ASTM C920, Type S, Grade NS, Class 25, USE NT, M (when primed), G and A. CASE 10 CASEDESCRIPTION PRICE PRICE7321 White $5.30*/tube $4.99*/tube7331 Grey 5.30*/tube 4.99*/tube*MUST buy in full case of 12 tubes per color or 30% upcharge

D•F BUTYL TAPE APPLICATOR

The Neanderthals learned to walk on their two hind legs and now you can too!! Instead of the old-fashioned, back breaking method of bending over to apply butyl tape onto your metal roofing panels, now you can apply butyl tape with the same speed and effort as if you were taking a brisk walk in the park. Durable tool made of light gauge steel with hardened plastic wheel. Tool can apply butyl tape 1/4” wide to 1” wide. 43” long. 7.4 lbs. tool wt.

Tacky Taper $155

BUTYL TAPE This grey colored butyl tape was specifically developed for sealing standing seam roof and endlaps in the metal building industry. This high performance permanently elastic modified butyl tape bonds through oily Galvalume™ metal without prewiping the surface. Its superior surface tack affords tenacious adhesion to Zincgrip™, aluminized steel, galvanized metal, polyurethane, polyvinyl fluoride, and siliconized polyester painted metal. Where superior tensile strength and extensibility (webbing/elongation) are critical, in both hot and cold climates, use our butyl tape.

FT/ ROLLS/ FT/ 1-4 5-9 10+DIMENSIONS (INCHES) CS CS RL CASES CASES CASES3/32 x 3/8 1200 16 75 $81.60 $74.16 $68.283/32 x 1/2 1200 16 75 83.76 76.20 69.241/8 x 1/4 1040 16 65 67.08 60.32 54.081/8 x 1/2 1200 20 60 99.96 90.72 82.561/8 x 1 650 10 65 100.88 92.17 83.721/8 x 2 320 8 40 96.96 88.32 80.323/16 Round 960 24 40 58.56 55.68 47.523/16 x 1/4 800 20 40 78.88 71.84 65.363/16 x 3/4 480 12 40 84.00 75.60 70.323/16 x 7/8 Web Section (H profile) 480 12 40 111.84 101.76 92.643/16 x 1 (White) 480 12 40 162.24 149.28 134.403/16 x 21/4 Web Section 240 12 20 116.64 106.08 96.4821/2” Triple Bead 200 8 25 90.64 83.22 74.90

ROTATING BARREL CAULK GUNOne of the most popular models on the market, this 10.3 oz. cartridge caulk gun has a 12:1 mechanical advantage to reduce application fatigue. Features include a switchable flow control, wear compensation, seal puncture rod and ladder hook. The rotating barrel facilitates applications around corners. For low to medium viscosity materials.

DUAL PURPOSE CAULK GUNSTwo guns are available that work on both sausage and 10.3 oz. cartridg-es. Both models come configured for sausages but include the plunger for cartridges. The 10 oz. version includes 2 white cone nozzles and cartridge plunger. The 20 oz. includes 3 yellow cone nozzles, a cartridge and bulk plunger. The 12:1 mechanical advantage greatly reduces application fatigue.

PART # GUN ACCOMMODATES PRICE

41004 Standard 10.3 oz. cartridges $24.95

PART # GUN ACCOMMODATES PRICE

51000 10 oz. sausage/10.3 oz. cartridge $42.2051001 10 oz./20 oz. sausage/10.3 oz. cartridge/bulk application 55.95PART # REPLACEMENT NOZZLES PRICE

2N1007 White cone for 51000 gun $1.252N1006 Yellow cone for 51001 gun 1.39

41004

111189D

Albion 139-3 1/10th Gal. Gun 375 $31.20/eAlbion 340-3 Quart Gun 375 41.65/e

#111 Hex Rod 200 $ 7.85/e#189D Drip Free 200 8.95/e#330 Hex Rod 250 15.50/e#250 Revolving barrel 350 29.50/e

NewBorn 1/10th Caulk

Guns

MAX LBSOF FORCE

MAX LBSOF FORCE

51000

CAULK GUNS

PRICE

PRICE139-3

51001

CAULK GUNS, BUTYL TAPE, APPLICATOR

CALL 800-821-5448 OR FAX 800-844-1199

ORDER ON-LINE @ DYNAMICFASTENER.COM Patch-Flash, 2-D & Versa-Flash are trademarks of Dynamic Fastener Service Inc.

10+ EPDM 10+ EPDM 10+ FDA WHITEPART # BLACK/GREY COLORS SILICONE2-D $7.10 $9.90 $12.35

DYNA-FL SH®

Use 2-D DYNA-FLASH (two dimensional) on sidewall and roof applications. The FDA white hi temperature silicone is approved by the FDA to be used near food. The EPDM are available in 12 colors.

Flashes up to 4” pipes. 61/4” outside dimensions. See bottom of pg 62 for service temperatures.

2-D™

OUTSIDE RETROFIT SQUARE PRICE PIPE PIPE BASE EPDMSIZE DIA. DIA. WIDTH 10+

#2 7/8”-4” 1/2”-31/2” 6” $10.35#3 1/4”-53/4” 2”-41/2” 8” 10.90#4 23/4”-7” 21/4”-61/2” 10” 15.85#5 4”-81/4” 31/2”-63/4” 11” 18.35#6 43/4”-10” 41/4”-91/2” 12” 25.10#7 51/2”-111/2” 5”-11” 14” 37.15#8 63/4”-131/2” 61/2”-12” 17” 42.25

Two applications-One solution. The Versa-Flash can be used in the tradi-tional pull-over method or cut down the designated track and used in retrofit ap-plications. Each flashing comes with a stainless steel gripper to secure for ret-rofit use. Only use the maximum pipe

diameters on minimal roof angles. For extreme pitches or surface irregularities use next larger size flashing. See bottom of page 62 for service temperatures.

Versa-Flash™DYNA-FL SH®

Use Severe-Slope DYNA-FLASH on roofs with a 3/12 to 16/12 pitch. Available in black EPDM and grey silicone.

FLASHESPART # UP TO 10+ EPDM 10+ SILICONESevere-Slope 1/4”-53/4” $20.70 $ 36.70Severe-Slope 2 4”-8” 76.45 129.95

DYNA-FL SH®

Severe-Slope

OUTSIDE SQ. RETRO SQUARE SQUARE DIMENSIONS DIMENSIONS BASE PRICESIZE WIDTH FLASHED WIDTH 10+#303SQB 3/8”-5” 11/2”-4” 8” $10.50#515SQB 1”-10” 13/16”-81/2” 163/4” 40.95#818SQB 2”-191/8” 13/4”-16” 243/4” 77.95

Position the seam of the flashing so that the seam is on the downslope.

One design for 2 applications. Use to flash pipes in new con-struction, or cut in designed

slot for retrofit applications. Each flashing includes stainless steel gripper and zip tie to secure on retrofit applications.

Zipper

ForSquare Pipe

DYNA-FL SH®

Use Patch-Flash DYNA-FLASH if an oversized hole was cut around the pipe to flash. Available in black and grey EPDM or red silicone.

Flashes up to 15” pipe. Base dimension is 191/2” x 191/2”. See bottom of pg 62 for service temperatures.

PART # 10+ EPDM 10+ SILICONE

Patch-Flash™ $54.60 $149.00

DYNA-FL SH®

Patch-Flash™

(SQUAREBASE)

Use this wrap-around DYNA-FLASH when a standard pull over DYNA-FLASH cannot be used. All four sizes are stocked in three choices: grey EPDM, grey silicone and red silicone. Service tempera-tures are the same as indicated in chart at bottom of pg 62.

Retrofit DYNA-FL SH®

Retrofit Outside Diameter DYNA-FLASH Retrofit 10+ ANY MIX of Pipe to be Base DYNA-FLASH Retrofit EPDM Flashed Diameter Height P/N Price 3/4” - 23/4” 63/10” 31/2” 801 $13.50 2” - 71/4” 103/4” 53/5” 802 19.25 31/4” - 10” 141/2” 54/5” 803 35.85 91/2” - 201/2” 25” 51/2” 804 79.75


CALL 800-821-5448 OR FAX 800-844-1199 DYNA-FLASH is a registered trademark of Dynamic Fastener Service, Inc.

$ 4.704.805.405.509.20

10.5015.6021.5025.8551.50

129.00

DYNA-FL SH® pipe flashings are made of EPDM in 12 colors or silicone in either red or grey, and are designed for maximum resistance to all weather conditions. Pipe diameters can be seen clearly for proper fitting. The base is designed to mold to most panel configurations and roof pitches regardless of pipe location.

Available in 12 colors:Brown • Black • Dark Grey • Light Grey • White

Dark Green • Light Green • Dark BlueLight Blue • Bright Red • Terra Cotta • Copper

Also Available in Red & Grey High Temp Silicone

DYNA-FL SH® PIPE FLASHING FOR METAL ROOFS


OUTSIDE BASE OVERALL

PRICE FOR

SIZE PIPE O.D. HEIGHT

GRAY or

DIA. DIA. BLACK 10+

ANY MIX

ORDER ON-LINE @ DYNAMICFASTENER.COM DYNA-FLASH is a registered trademark of Dynamic Fastener Service, Inc.DYNA-CAP is a trademark of Dynamic Fastener Service, Inc.

DYNA-FL SH® pipe flashings are now available in the most requested color. . .INVISIBLE

All 12 colors are in stock for all 11 sizes (mini-#10). Grey & Black Dyna-Flash® are priced on pg 62. Add 40% to those prices when ordering blue, brown, green, red or white. The copper & silicone

adder is even greater but varies by size.

Since we routinely stock 20,000-25,000 units of these flashings on pages 61-63 - we will ship today

whatever you order today.

HIGH TEMPERATURE DYNA-FL SH®

Available in: 10 Sizes • Pipe Range: 0” to 19”Made of High Temperature Grey or Red Silicone. These slip over silicone

flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

DYNA-CAP™APPLICATIONS:

Skylights • Metal Curbs • Ridge ApplicationsFlexible width allows for most panel configurations. Expansion feature accommodates all seam heights. Base features allow side wall of end cap to form on roof panels. Base allows application at both terminating points of the sheeting or roofing material.

A: OVERALL B: INNER C: BASESIZE USES HEIGHT DEPTH WIDTH 10+

DYNA-CAP Most Trapezoidal 31/4” 41/4” 71/4” $10.95 PanelsDYNA-CAP AG Most AG Panels 3/4” 2” 3” 4.65

DYNA-CAP AG

DYNA-CAP

DYNA-CAP

DYNA-CAP AG


CALL 800-821-5448 OR FAX 800-844-1199

EXPANSION JOINT COVERSOur expansion joint covers feature a 3-ply reinforced hypalon bellow with laminated closed-cell foam backing. The flexible closed-cell foam backing maintains bellow contour and flex-ibility. A 33/4” wide metal flange is factory double locked to both of the long edges of the bellow. The metal flange may be ordered in: aluminum, galvanized steel, stainless steel or cop-per. Bellows may be ordered from 4” to 12” wide.

PRICE PER ROLL EXPANDED BROKEN SIZE FT/RL RL/CASE CASE 1-2 CS. 3 CS. 3/4 x 5/8” 19.7’ 40 $ 9.80 $ 8.40 $ 7.50 1 x 1” 19.7’ 26 14.30 12.30 10.95 1 x 3” 19.7’ 26 40.85 34.95 31.30 11/4 x 5/8” 13.1’ 32 12.70 10.90 9.80 11/4 x 1” 13.1’ 24 14.75 12.60 11.25 11/2 x 1” 13.1’ 24 16.40 14.10 12.60 11/2 x 3” 13.1’ 8 50.15 42.95 38.40

EMSEAL UNIVERSALCLOSURE STRIP

AST Universal closure from EMSEAL has been the choice of metal roof and building manufacturers for over 30 years. It is suited for sealing troublesome hip and valley details. The oversized open cell foam strip is impregnated with a unique asphaltic adhesive. Shipped in a compressed form on reels, the foam self expands once opened to exert continuous back pressure on the surfaces it touches. (EJ)

Made of 7”, 9”, 12”, & 18” wide Grey ozone resistant EPDM rubber. Encapsulated expandable aluminum sides. Available in 50’ lengths.Applications: Transition Walls • Parapet WallsStepped Roofs • Corrugated Metal Roofs • SkylightsRoof Penetrations • Expansion Joint.

TRANSITION WALL ROOF PENETRATIONS STEPPED-ROOF

DECKSTRIPThermal plastic elastomer (TPE) flashing material eliminates cumber-some metal fabricated flashings. The concertina (accordion like) alu-minum edges stretch up to 25%. Once the edge is stretched it never retracts. Material may be painted. Product can withstand continuous temperatures ranging from -58°F to 239°F. Available in 7”, 9” and 12” widths in rolls of 75’ & 18” wide in rolls of 50’. (12” width only available cut to length in 1 ft. increments)

BOX GUTTER EXPANSION JOINT

FLASHINGS & EMSEAL


MAKE A CLAMPSTAINLESS STEEL BAND AND FASTENERS (DTC)

C4001 $110.00Clamp Kit(100 ft. band and 25 adjusting clamps)

C4003 $58.60Box of 25 adjusting clamps only

Make clamps any size 2” diameter and larger.

PART CURB BASE KIT # I.D. DIA. KIT CONTENTS WT. PRICE

F1331 3” 51/2” 10 curbs, 8 tubes pourable 12 lbs. $164.90 sealer, 2 tubes M1 sealantF1354 4” 73/4” 4 curbs, 1/2 gal. pourable 10 lbs. 95.70 sealer, 2 tubes M1 sealantF1358GR 4” Ditto above except the sealants which 9 lbs. 115.10 withstand 350° continuous, 450° intermittent

F1350 6” 101/2” 3 curbs, 3 pouches pourable 24 lbs. 113.10 sealer, 2 tubes M1 sealantF1359GR 6” Ditto above except the sealants which 19 lbs. 146.35 withstand 350° continuous, 450° intermittent

F1306P 71/2” 91/2” 2 curbs, 2 pouches pourable 179.95 sealer, 2 tubes M1 sealant

F1351 9” 13” 2 curbs, 2 pouches pourable 36 lbs. 113.55 sealer, 2 tubes M1 sealantF1426 1 pouch pourable sealer (1/2 gal.) 40.35

C-126 (2”-6” pipe)

C-412 4 @ (1”-2” pipe)

C-481 4 @ (.375”-1” pipe)

C-212 2 @ (.375”-1” pipe) 2 @ (1”-2” pipe)

PIPE AND RETROFIT FLASHINGSFor built-up, modified bitumen and single ply roofing

Large Medium Smallfor 1” to 12” nominal pipes

(POPB)

E-CURB KITS

The E-Curb system replaces old-style pitch pans with versatile, precast com-ponents and pourable sealants that can usually be installed in under 15 minutes – and never require flashing or mechanical attachment. Can seal single, multiple or irregular penetrations on a variety of roof surfaces including: granulated modified bitumen, asphalt, coal tar B.U.R., PVC, EPDM, PIB & TPO. A 10 year warranty against leaks is activated with submittal of completed card. (POF) NOTE: Always maintain a minimum distance of 1” between penetrations and the inside edge of the E-Curb in order to obtain a proper seal.

(PORF)

Interchangable rubber caps for versatility (POCF)Service Temperature -60°F to 270°F

Single and Double Pipe Portal Systems® (POCF)Roof curbs available separately (POCU)

PIPE PORTAL SYSTEMS and ALUMI-FLASH SYSTEMSfor watertight sealing at penetrations

PREMOLDED CORNERSfor securely sealing those tricky corner details (POCN)

Available WITH or WITHOUT cantin EPDM rubber or Neoprene for BUR and Modified Bitumen

VENTS and BREATHERSfor relief of trapped moisture in roofing systems (POVB)

Large Aluminum Standard HDPE Standard Aluminum

REROOF DRAINSfor quick and easy retrofits (PORD)

Stainless Steel or Aluminum Black ABS or White PVCall with solid CAST Clamping Ring

your choice of CAST or POLY Dome

ADAPTERSfor square tubes, angle irons and small round shapes (POAD)

Standard, Extra Wide (EW)Extra Tall (XT), and

Large Alumi-Flash Systems (POAF)

EPDM HEIGHT ADJUSTABLE

SUPPORTSPipe sizes up to 4”. Height Adj. ranges from 13/4” to 6” (POPS)

PROUDLYMade in the USAFLASHINGS, CLAMPS, DRAINS & VENTS

CALL 800-821-5448 OR FAX 800-844-1199

D•F, DYNA-GUARD, DYNA-CLIP, DYNA-CLAMP and SNO-DAM are registered trademarks of Dynamic Fastener Service Inc.

Although you will pay the lowest price of the quantity break that you achieved on any Dyna-Guard component, even if you don’t buy in full box quantity, please know that we very much appreciate it when you order in full box quantities!

6” Center PunchDyna-Guard

Unpunched Dyna-Guard

4” Center PunchDyna-Guard

Unpunched $23.20 $17.95 $17.25 $16.60 $15.958” Center Punch 24.50 18.95 18.25 17.50 16.856” Center Punch 24.50 18.95 18.25 17.50 16.854” Center Punch 26.25 20.20 19.40 18.65 17.95

Packed with splice connector PRICE PER 8’ STICK OF DYNA-GUARDDYNA-GUARD BACK STEM 1-11 12-47 48-119 120-239 240+

Priced per clip

DYNA-CLIPS® are used as an option to attach the Dyna-Guard to the DYNA-CLAMPS®. Dyna-Clips are necessary to use if the seams are not divisible by 4” or 6”, or if the Dyna-Guard is not being installed perpendicular to the seams. Use unpunched Dyna-Guard when using Dyna-Clips. If the Dyna-Guard is being installed in the common “perpendicular to the seams orientation” and if the seams are divisible by 4” or 6” then you may order & install prepunched Dyna-Guard. Then, the prepunched Dyna-Guard bolts directly to the Dyna-Clamp without using a Dyna-Clip. Where Dyna-Clips are required, the installer can field drill in lieu of using the Dyna-Clips. If field drilling, then check out the DYNA-GUIDES (on pg. 69).

PCS/BOX BROKEN BOX 1-2 Boxes 3-4 Boxes 5-6 Boxes 7-9 Boxes 10+ BoxesDYNA-CLIPS® 100 $1.99 $1.75 $1.50 $1.25 $1.10 $.99

DYNA-GUARD® snow retention system is a continuous rail-system designed to be used on metal roofs. This rail-system can be easily installed on a new construction project or retrofitted to an existing metal roof. Dyna-Guard is an 8’ long extruded aluminum stick with a T-shape profile. Simply insert a 2” wide paint-ed strip of metal from the same material as the roof to maximize roof line aesthetics and to provide year round protection from devastating snow and ice avalanches.

D•F® DYNA-GUARD®

DYNA-CLIPAssembled

DYNA-CLIP


BOX BROKEN 1 4+ITEM QTY BOX BOX BOX

Junior 100 $3.10/pc. $2.75/pc. $2.50/pc.Original 50 5.30/pc. 4.75/pc. 4.30/pc.DuraSil* 24 9.95/tube 7.45/tube 6.85/tube*1 Tube will adhere 8 original or 16 junior ORIGINAL

JUNIORSNOW SHOES

Snow shoes are molded from tough UV-stabilized polycarbonate plastic. These are easily attached to any metal roof using DuraSil adhesive. Two sizes are stocked for most applications. The original 5”x5” has a full 25 sq. in. of bonding surface and when installed diagonally has a generous 7” barrier for wider rib spaces. The junior 2” x 61/4” has 12.5 sq. in. of bonding surface and fits panels with narrow rib spacing. OPTIONS: both sizes are stocked in clear. Colors can be ordered in on request. In addition, either size can be ordered with a double stick, pre-applied tape. Call for pricing.

ROOF EAVE

1st ROW OF DYNA-GUARD TO BE INSTALLED 6”-12” FROM

EAVE OF ROOF

2nd ROW OF DYNA-GUARD (IF NEEDED) TO BE INSTALLED NO FURTHER THAN 1/5TH OF THE

“EAVE TO RIDGE” ROOF LENGTH BUT AT LEAST 6’

ABOVE 1st ROW

ROOF SLOPE

GENERAL GUIDELINE

FOR DYNA-GUARDINSTALLATION

LOCATION

SIMPLIFIED VIEW OF ROOF

SEGMENT

ROOF RIDGE

DYNA-GUARD on duty

Chief Building’s 2017 Building of the year: Martha’s Vineyard Airport Fire Station, built

by MMS Northeast Inc

Roof perimeters accented and protected with DYNA-GUARD

Attention architects / specifiers:For a CSI 3 part specification and CAD details on DYNA-GUARD products see our page on Arcat

https://www.arcat.com/arcatcos/cos50/arc50660.html

https://www.arcat.com/company/dynamic-fastener-50660/spec

https://www.arcat.com/company/dynamic-fastener-50660/cad

D•F® DYNA-GUARD®

Scan this code with your smart device to visit our ARCAT

page.

DC-U MINIDC-ZRDC-TS

DC-DFDC-NFDC-SLDC-U

DC-SL MINI

ONE PIECE CLAMP. NO INSERT.

ONE PIECE CLAMP. NO INSERT.

CALL 800-821-5448 OR FAX 800-844-1199 D•F, DYNA-GUARD & DYNA-CLAMP are registeredtrademarks of Dynamic Fastener Service Inc.


PCS/ BROKEN 1-4 5-9 10-19 20+DYNA-CLAMPS® BOX BOX BOXES BOXES BOXES BOXES

DC-U 30 $7.75 $5.95 $5.65 $5.25 $4.95DC-SL 30 7.35 5.65 5.35 5.00 4.75DC-NF 30 7.75 5.95 5.60 5.30 5.00DC-DF 60 5.65 4.35 4.10 3.85 3.65DC-TS 48 5.60 4.30 4.20 4.10 3.95DC-ZR 44 5.60 4.30 4.20 4.10 3.95DC-U MINI 50 5.40 4.15 3.95 3.70 3.50DC-SL MINI 50 5.40 4.15 3.95 3.70 3.50

DYNA-CLAMPS® are a non-ferrous non-piercing clamp for attachments to standing seam metal roofs. Dyna-Clamps are pre-packaged with stainless steel round-point setscrews that won’t pierce the panel and stainless steel bolts and 1 driver for setscrews per box. Our stainless bolts are the familiar English stan-dard 5/16-18 bolt — not metric.

DYNA-CLAMPS® have undergone extensive third-party testing by the esteemed Encon Technology Tulsa, OK. Above illustrates the four positions that a DC-U can be installed on standing seam. Plus, the clamp can be posi-tioned such that the bolt can be up slope or down slope, depending on your application. Eight different Dyna-Clamps with round-point setscrews are available to accommodate many different profiles of standing seam metal roofs. All DYNA-GUARD components are extruded from aircraft quality, high tensile aluminum “6005A T61 Aluminum”. All of these components are proudly manufactured in the U.S.A.

D•F® DYNA-CLAMPS®

Price Per Piece

ORDER ON-LINE @ DYNAMICFASTENER.COM VersaBracket is a trademark of Metal Roof InnovationsDYNA-CORR and DYNA-MOUNT are trademarks of Dynamic Fastener Service Inc.

DYNA-CLAMPPart # Accomodated Price

DYNA-GUIDE™ U DC-U $14.95DYNA-GUIDE™ N DC-NF & DC-DF 14.95

DYNA-GUIDE™ has proven to be a significant labor-saver when installing Unpunched DYNA-GUARD onto a DYNA-CLAMP if DYNA-CLIPS are not being used. After the clamp is attached to the standing seam, rest the DYNA-GUIDE on top of the clamp with the Unpunched DYNA-GUARD in the mouth of the guide. Be certain the guide is firmly butted against the DYNA-GUARD. Drill a 3/8” hole using the 3/8” finder hole on guide. Remove guide. Install bolt thru DYNA-GUARD into clamp. Move to next clamp & repeat.

DYNA-GUIDETM

Tighten setscrews and bolts with this precision torque wrench. Calibrated within ± 4% and ready to use. Wrench emits a "click" that can be heard & felt when the preset value is reached. Reversible ratchet head drives in both directions & measures torque in clockwise direction. 1/4" sq dr, 20-200 in lbs. range, 10.9" long, includes storage case.

PART # DESCRIPTION PRICEG20200 1/4" sq dr/20-200 in-lbs. torque $59.50

BODY PCS/ BROKEN 1-4 5-9 10-19 20+ HEIGHT THICKNESS BOX BOX BOXES BOXES BOXES BOXES

DYNA-MOUNT 1 1.86" .120" 100 $2.85 $2.40 $2.25 $2.10 $1.95DYNA-MOUNT 2 2.65" .120" 70 3.65 3.05 2.85 2.65 2.50VersaBracket™ 67 2.65" .100" 70 4.75 3.85 3.65 3.45 3.25

Price Per Piece

DYNA-GUARDfastened to

DYNA-MOUNTS Although you will pay the lowest price of the quantity break that you achieved on any Dyna-Guard component, even if you don’t buy in full box quantity, please know that we very much appreciate it when you order in full box quantities!

Use DYNA-MOUNTS™ as an attachment device to secure DYNA-GUARD or practically anything to almost any exposed fastener trapezoidal metal roof. These mounts are offered in two different heights: 1.86" and 2.65". No fasteners are included with any of these mounts.

PCS/ BROKEN 1-4 5-9 10-19 20+ BOX BOX BOXES BOXES BOXES BOXES

DYNA-CORR 54 $6.50 $5.40 $5.00 $4.70 $4.405/16-18x5/8" S/S Bolt 2,000 $ .38 $ .28

Price Per Piece

DYNA-CORR™ is a mounting attachment used to attach unpunched Dyna-Guard or practically any-thing to 7/8" or 3/4" corrugated roofing. Order the screws and 5/16-18x5/8" S/S bolts separately. Although you will pay the lowest price of the quantity break that you achieved on any Dyna-Guard component, even if you don’t buy in full box quantity, please know that we very much appreciate it when you order in full box quantities!

SNO-DAM 3SNO-DAM 2 SNO-DAMS® inhibit the ability of snow and ice to slide under the installed Dyna-Guard. They slide on the back of the Dyna-Guard from either end. Sno-Dams are necessary to have installed between every seam. Sno-Dams are 3" wide. "Retro Sno-Dams" are very similar to the standard Sno-Dams, but the retro style, instead of being slid on, are designed to be firmly pressed onto the back of the Dyna-Guard after installation. End user must drive in a screw (included with purchase) thru the hole in the Retro Sno-Dam.

USE VERTICAL PCS/ BROKEN 1-4 5-9 10-19 20+SNO-DAM® PART # SEAM HEIGHT BOX BOX BOXES BOXES BOXES BOXES

SNO-DAM 2 1" to 2" 66 $3.50 $2.85 $2.45 $2.20 $1.85SNO-DAM 3 13/4" to 3" 40 3.95 3.30 2.90 2.50 2.25Retro SNO-DAM 2 1" to 2" 66 4.30 3.50 3.10 2.70 2.35Retro SNO-DAM 3 13/4" to 3" 40 5.15 4.20 3.75 3.25 2.85


D•F® DYNA-GUARD® COMPONENTS

RETROSNO-DAM 3

RETROSNO-DAM 2

CALL 800-821-5448 OR FAX 800-844-1199

PRODUCTS

COMPONENTS

CorruBracket™ $ 7.50

S-5-BSF Brass Clamp 11.00

S-5-K Clamp 10.00

S-5-SS Mini Stainless Clamp 14.00

SnoClip™ II 1.50

VB-67 VersaBracket™ See pg 69

X-Clip II™ $2.75X-Gard 1.0™ 1.95X-Gard 2.0™ 4.75

S-5!® SnoFence™ ProductSnoPost™ Endpost Brass $ 5.00Aluminum 3/8” Rod 12’ Stick 4.50Brass 3/8” Rod 12’ Stick 26.00Stainless 3/8” Rod 12’ Stick 15.00

Fasteners for S-5!10MM dia x 5/8” long s/s bolt serrated face $.4010MM dia x 5/8” long s/s bolt with s/s washer .3510MM dia x .79” long s/s bolt no serrated face .308MM s/s serrated flange nut .20

X-Gard, X-Clip, CorruBracket, VersaBracket, SnoClip, SnoPost, and SnoFence are Trademarks of Metal Roof Innovations Ltd. S-5! is registered Trademark of Metal Roof Innovations Ltd.

IT IS TIME FOR A

CHANGING OF THEGUARD

DYNA-GUARD® is a snow retention system designed to be installed on metal roofs (see pages 66 thru 69). We are discontinuing the line of S-5!® and related products, as listed on the bottom half of this page. It is ok to break box quantity without price penalty. As our stock on hand gets depleted on any item then minimum order quantities on that item might be required.

1) DYNA-CLAMPS have undergone extensive testing by the esteemed Encon Technology, Tulsa, OK.

2) All DYNA-GUARD, DYNA-CLAMP and SNO-DAM items are extruded from aircraft quality, high tensile aluminum “6005A T61 Aluminum”.

3) All of these components are proudly manufactured in the U.S.A.4) Since 2000, our factory has produced over 5 million pounds of aluminum

snow retention components for metal roofs.

Therefore, when you buy DYNA-GUARD from us, you know that you are purchasing the highest quality parts manufactured by a proven veteran at supplying high quality snow retention components to our metal roof industry. Since we have a mutually exclusive relationship with our factory, you must purchase DYNA-GUARD and DYNA-CLAMPS to know that you’re receiving the true time-tested results/benefits of dealing with our high quality factory.

We are factory-direct on all of these components. Therefore, our valuable contractor customers benefit by paying substantially lower prices. Our valuable O.E.M. customers benefit by eliminating minimum order quantities and by eliminating any lead-time – which can stretch out to unacceptable lengths of 4 or even up to 6 weeks with some of our competitors. O.E.M’s; our huge inventory levels will translate into less of your cash tied up in your inventory and typically completely eliminate the frustration of dealing with needed items that are on backorder.

S-5!® X-Gard™

CorruBracket™

S-5-K

S-5-BSF

SnoClip™ II

S-5-SS MiniStainless




MAGNETIC 1/4” 5/16” 3/8”LENGTH 10 100 10 100 10 100

1-3/4” $2.15 $1.50 $2.15 $1.50 $2.35 $1.65

2-9/16” 2.50 1.75 2.50 1.75 2.65 1.85

4” 3.85 2.70 3.85 2.70 4.15 2.90

6” 5.35 3.75 5.50 3.85 5.90 4.15

12” 13.20 9.25 15.65 11.00 16.85 11.85

NON-MAGNETIC 1/4” 5/16” 3/8” 10 100 10 100 10 100

$1.70 $1.20 $1.75 $1.20 $1.90 $1.35

2.00 1.40 2.00 1.40 2.20 1.55

We also stock these D•F® mag nut runners Size 10 100 7/16x1-3/4 $3.95 $2.75 1/2x1-3/4 4.50 3.00 9/16x1-3/4 5.20 3.60


D•F® SOCKETS, EXTENSIONS, ADAPTERS

BIT HOLDERS TOOL HEX BITPART # TYPE WIDTH LENGTH MAG? 1-9 10+BH44M-2 1/4” Hex 1/4” 2-1/8” Yes $ 4.70 $ 4.25BH44M-3 1/4” Hex 1/4” 3” Yes 4.95 4.40BH44M-6 1/4” Hex 1/4” 6” Yes 9.25 8.30BH44M-12 1/4” Hex 1/4” 12” Yes 13.70 12.25BH45M-3 1/4” Hex 5/16” 3” Yes 5.25 4.70BH64N-1 3/8” Sq Dr 1/4” 1-3/8” No 5.25 4.70BH84N-2 1/2” Sq Dr 1/4” 1-3/4” No 5.25 4.70BH85N-2 1/2” Sq Dr 5/16” 1-3/4” No 5.25 4.70

UNIVERSAL JOINTS

Use for situations where your impact wrench can’t be in-line with the bolt head or nut.


UJ88 1/2” Sq Dr to 1/2” male with $21.50 locking pin retainerUJ1212 3/4” Sq Dr to 3/4” male 49.85 with pin hole

ANY MIX ANY MIXPART # LENGTH 1-9 10-24 25+XSQ88-3 3” $ 7.20 $ 6.55 $ 5.95XSQ88-5 5” 9.25 8.40 7.65XSQ88-7 7” 13.90 12.65 11.50XSQ88-10 10” 17.25 15.70 14.25

D•F® EXTENSIONS

FOR1/2” SQ DR IMPACTS

Most of the below come with “pin lock” retention, a much more secure retention system vs. “ball lock”.

TOOL TYPE SOCKETPART # ACCOMMODATED ACCOMMODATED LENGTH 1-9 10+AHX44-2 1/4” Hex 1/4” Sq Dr 2” $ 2.35 $2.10AHX44-4 1/4” Hex 1/4” Sq Dr 4” 3.10 2.75AHX44-6 1/4” Hex 1/4” Sq Dr 6” 3.60 3.25AHX44-12 1/4” Hex 1/4” Sq Dr 12” 10.95 9.95AHX46-2 1/4” Hex 3/8” Sq Dr 2” 3.15 2.85AHX46-4 1/4” Hex 3/8” Sq Dr 4” 4.95 4.50AHX46-6 1/4” Hex 3/8” Sq Dr 6” 5.50 4.95AHX48-2 1/4” Hex 1/2” Sq Dr 2” 3.95 3.60ASQ84-1 1/2” Sq Dr 1/4” Sq Dr 1-1/4” 8.50 7.65ASQ86-2 1/2” Sq Dr 3/8” Sq Dr 2” 8.50 7.65

TOOL TYPE SOCKETPART # ACCOMMODATED ACCOMMODATED LENGTH 1-9 10+XSQ88-3 1/2” Sq Dr 1/2” Sq Dr 3” $ 7.20 $ 6.55XSQ88-5 1/2” Sq Dr 1/2” Sq Dr 5” 9.25 8.40XSQ88-7 1/2” Sq Dr 1/2” Sq Dr 7” 13.90 12.65XSQ88-10 1/2” Sq Dr 1/2” Sq Dr 10” 17.25 15.70ASQ812-2 1/2” Sq Dr 3/4” Sq Dr 1-7/8” 13.75 12.50ASQ128-2 3/4” Sq Dr 1/2” Sq Dr 2-1/4” 23.50 21.20XSQ1212-3 3/4” Sq Dr 3/4” Sq Dr 3” 26.20 23.70XSQ1212-7 3/4” Sq Dr 3/4” Sq Dr 7” 30.75 27.65XSQ1212-10 3/4” Sq Dr 3/4” Sq Dr 10” 41.95 37.85ASQ1612-3 1” Sq Dr 3/4” Sq Dr 2-15/16” 32.85 29.85XSQ1616-7 1” Sq Dr 1” Sq Dr 7” 46.75 42.40

ADAPTERS & EXTENSIONS

1/4” BIT TYPE SIZE 1-49 50 100+1” Insert Phillips #1, 2, 3 $.38 $.29 $.241” Insert Slotted #1, 2, 3 .44 .36 .291” Insert Square #1, 2, 3 .44 .36 .2915/16” Power PH, SL, SQ #1, 2, 3 .66 .51 .4223/4” Power PH, SQ #1, 2, 3 1.19 .94 .781” Insert Torx, Wedged #20, 25, 30 1.70 1.55 1.4015/16” Power Torx, Wedged #20, 25, 27, 30 3.75 3.35 2.95

TAMPERPROOF1/4” BIT DESCRIPTION 1-49 50 100+1” Insert Torx: #15, 25, 27 $2.10 $1.90 $1.70Ditto, Wedged Torx Wedged: #20, 30 2.30 2.10 1.85115/16” Power Torx Wedged: #20, 30 4.25 3.85 3.50

1/2” Sq Dr to 1/2” Sq Dr - with pin lock.

CALL 800-821-5448 OR FAX 800-844-1199

FASTENER METAL

ZINC & ALUMINUM & BRASS,

MARTENSITIC AUSTENITIC BASE METAL GALVANIZED ALUMINUM

COPPER, STAINLESS STAINLESS

STEEL ALLOYS BRONZE,

410 302/304, 303, 305 MONEL

ZINC & GALVANIZED STEEL A B C C C

ALUMINUM & A A C NR B ALUMINUM ALLOYS

STEEL & CAST IRON AD A C C B

BRASS, COPPER, ADE AE A A B BRONZE, MONEL

AUSTENITIC STAINLESS ADE AE AE A A STEEL (302/304)

A. The corrosion of the base metal is not increased by the fastenerB. The corrosion of the base metal is somewhat increased by the fastenerC. The corrosion of the base metal may be distinctly increased by the fastenerD. The plating on the fastener is rapidly consumed, leaving the bare fastener metalE. The corrosion of the fastener is increased by the base metalNR. Not recommended, see below.

Note: Surface treatment and environment can change activity

D•F® Dyna-Coat® 1,000 Hour Long Life Premium Coating What is the definition of long life? The answer would vary greatly depending upon your subject. For instance, the life expectancy of an African elephant on the Serengeti would be substantially different than that of a mosquito on your forearm. Unfortunately for the contractor, the same nebulous and misleading signals are sent when some of our competitors claim that their fasteners have a long life coating. Once again, “long life” is just a relative phrase. To eliminate unnecessary concerns on behalf of our valued customers, we quantify the meaning of long life. Since Dyna-Coat passes the 1,000 hour salt spray test, we proudly proclaim “1,000 Hour” right next to the word Dyna-Coat. Rarely if ever do we see our competitors touting the tests that their screws pass. That is a suspicious omission. To paraphrase the famous commercial: “What’s on your fastener?” Removing the uncertainty on this very important topic is easy. Specify Dyna-Coat 1,000 hour salt spray premium coating on all of your screw requirements. Dyna-Coat is a premium organic polymer coating. It is designed to provide optimum corrosion resistance for metal fasteners. Fasteners that are coated with Dyna-Coat exhibit excellent resistance to marring, chipping and abrasion. The color of the coated fas-tener is metallic silver.

Test Parameters Dyna-CoatASTM B117 Passed for 1000+ hoursSalt-natrium chloride 5%Water-Distilled waterTemperature-95 degree F±2 degreePH of collected saltWater 6.50-7.20

Chamber Type/Model Salt spray Test cabinet YS-ST-60

Chip/Mar resistance Excellent

Our coating process insures that the fasteners will not have any hydrogen embrittlement. Dyna-Coat employs several forms of cor-rosion resistance, such as: replacement, inhibition, envelopment and electrochemistry. These coated fasteners also have strong resistance against acid and alkaline chemicals.

D•F® Dyna-Coat® & ENGINEERING DATA

GALVANIC ACTION CHART

There are only two types of selfdrilling screws that Dynamic Fastener recommends for drilling through or into aluminum: the all-300 stainless selfdrillers & bi-metal selfdrillers (see page 87 for our full offering). Aluminum has very unique properties that result in a highly critical fastener selection process. Two of the more apparent properties of aluminum are: it gets very hot when drilling into it and the fact that it can expand & contract a significant distance. When coupling the many unique properties of aluminum with the high core hardness of a carbon steel screw or a 410 stainless steel screw, a potential for screw failure due to stress corrosion cracking can too easily be created due to the lack of ductility/high core hardness on the Rockwell scale. When mechanically fastening dissimilar metals, such as steel & aluminum, once water is added, either directly or through the atmosphere, then a galvanic reaction will occur. That reaction causes the formation of hydrogen. This hydrogen is a necessary element for the creation of hydrogen assisted stress cracking. This condition which results in screw failure, can occur in 410 S/S & carbon steel screws due to their high core hardness. But the all-300 series stainless selfdrillers & bi-metal selfdrillers shown on page 87 have a low core hardness which prevents hydrogen assisted cracking. Impacting drivers and impact wrenches produce too much torque to be used to install screws. A D•F #12 dia T-3 selfdriller requires a minimum 92 in-lbs. of torque to install. Yet, an impacting driver produces about 1,825 in-lbs. of torque. Do not use either of those tools to install painted &/or selfdrilling screws. Using a screwgun with a clutch is recommended in lieu of depth sensitive. We recommend the Dewalt DCF622, DW267, DW268 or DW269 for screw installation.

Just because they SAY it doesn’t make it true. Make our competitors quantify their coating’s life expectancy in WRITING – as we do without even being asked.


NOMINALNOMINALSCREWSCREWSIZESSIZES

Thread Decimal Diameter Equivalent #6 .140 #7 .150 #8 .160 #9 .180 #10 .190 #11 .200 #12 .210 #13 .230 1/4 .240 #14 .250 #17 .285 #18 .304

SHEETSHEETSTEELSTEEL

GAUGESGAUGES Common Decimal Sheet Steel Equivalent Gauges 29 .014 26 .018 24 .024 22 .030 20 .036

18 .048

16 .060

14 .075

12 .105

10 .134

LIG

HT

ME

DIU

M

All tests were conducted under laboratory conditions. Ultimate values are listed. The user or specifier must determine and apply appropriate safety factors. Unless otherwise provided, a 4-to-1 safety factor is commonly used. Because actual applications vary and are uncontrollable by Dynamic Fastener, we assume no liability for the use of this data.

NOTE: Pullout values in wood will vary drastically more than pullout values in steel because of the vast inconsistencies of wood. These pullout values should be used as only a guideline. A job site pull test is required if you need to know the exact pullout values for your specific project. Users must determine and apply appropriate safety factors.

OUR PLYWOOD 2x4 PINECODE FASTENER 1/2” 3/4” 1” 11/2”

CS AS 8-15 T-17 S/S 212 551 662

MW 9-14 381 534 736 1047

MW 9-14 S/S 362 500 894 1272

MW 10-16 Hi-Lo 393 552 763 1289

CS AC 10-12 T-17 358 572 837 921 (11/4”)

CS AS 10-12 T-17 S/S 329 637 969 1299

CS AC 12-11 T-17 341 610 1027 1240

CS AS 12-11 T-17 S/S 444 623 766 1321

MW 12-16 Hi-Lo 422 626 855 956 (11/4”)

AC 14-10 T-17 449 641 870 1538

FASTENER STEEL GAUGE

DIA. POINT 26-26 24-24 22-22 20-20 18-18 16-16 14-14 12-12 1/8-1/8 1/4-1/4

#6 T2 290 351 531 758 845

#8 T2 296 391 550 740 1060

T1 416 523 742 884 1373

#10 T2 303 440 629 830 1206 T3 728 1263 1592 1674

T1 414 649 987 1018 1452

T3 769 1358 1774 2332 2478

#12 T4 2074 2207

T5 2198 2207 2364

T1 544 684 1143 1244 1764#14

T3 930 1442 1889 2697 28901/4-20 T5 3362 3448 3759

#18 T1 493 648 10215/16-12 T3 2399 3638 4482 46755/16-18 T3 2057 3120 5297 6493

FASTENER STEEL GAUGE

SIZE POINT 26 24 22 20 18 16 14 12 3/16” 1/4” 3/8” 1/2”

#6 T2 134 179 275 296 471 629 962

#8 T2 168 177 283 298 491 800 978

T17 218 261 444 480 585

T1 195 249 308 357 565 961 1163 #10

T2 148 244 283 368 547 853 1023 1436

T3 142 204 288 299 499 760 1041 1388

T17 203 283 388 495 670

T1 165 288 376 390 649 1179 1619 1991#12

T3 143 172 259 341 551 838 941 1630 2780

T4 495 742 1059 1587 3245 4013

T5 487 792 1027 1746 3796 4208

T1 224 313 545 562 800 1113 1547

#14 T2 244 268 355 420 615 1134 1385 1785

T3 161 225 296 346 613 1034 1297 1602 3382

T4 863 1181 1642 3415 5304

T5 5547 5593 6244

#17 AB 253 324 410 442 553 940 1144 1843 3672 4249

#18 T1 275 415 614 14695/16-12 T3 1007 1425 2218 4616 64865/16-18 T3 830 1147 1565 3633 4629

D.F

D.F

FASTENER VALUESFASTENER VALUES TENSILE TENSILE SHEAR TORQUEFASTENER (LBS. MIN) (AVG. LBS. ULTIMATE) (AVG. LBS. ULTIMATE) (MIN. IN-LBS.) (ULTIMATE IN-LBS.)

6-20 1284 1656 983 25 53

8-18 1544 2466 1319 42 74

10-16 1936 3298 1929 61 114

12-14 2778 4216 2741 92 215

12-24 T4 3020 3999 2365 100 206

12-24 T5 3188 4535 2289 150 215

14-14 4060 4769 3834 150 253

14-20 T5 4225 5940 3651 150 338

17-14 5300 6437 5188 180 569

D.F

D.F

ULTIMATE SHEAR VALUES (POUNDS)ULTIMATE SHEAR VALUES (POUNDS)

Drill 3/16” hole Drill 1/4” hole

ULTIMATE AVERAGE PULLOUT ULTIMATE AVERAGE PULLOUT VALUES IN METAL (POUNDS)VALUES IN METAL (POUNDS)

WARNING: You must specify or purchase D•F brand screws if you are referencing the data on this page. Otherwise, buyer beware!ULTIMATE AVERAGE ULTIMATE AVERAGE

PULLOUT VALUES PULLOUT VALUES IN WOOD (POUNDS)IN WOOD (POUNDS)

ENGR. DATA FOR D•F® BRAND 1022 CARBON STEEL SCREWS

CALL 800-821-5448 OR FAX 800-844-1199 Dyna-Coat & D•F are registered trademarks of Dynamic Fastener Service Inc.

12-14x3/4” TORX 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to steel fram-ing from .036” to .210” total steel thickness. #25 torx pan head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 10x3/4” T-2 or 12x3/4” T-3.

16)

12-14x1” T-3 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to steel framing from .036” to .210” total steel thickness. T-3. 5/16” HWH. Select with or without stainless sealing washer assembled. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 3/4”, 1”, 11/4”, 11/2”, 2” or 3”.

15)

12-14x11/4” PFH T-3

Wood to .036” to .210” thick steel. T-3. #3 PFH. Zinc plated. Choose 11/4” or 2”. (HT)

14)

12-14x3/4” T-3 TORX PAN HEAD

Sheet to steel framing from .036” to .210” total steel thickness. T-3. #25 torx pan head. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only 3/4”. (SN)

13)

12-14x3/4” T-3 “NARROW PPH”

Finally, a #10 headed (.365” wide head) screw for fastening in a caulk joint with-out panel deformation, yet maintains the shear and pullout values of a standard #12 diameter screw. T-3. #2 phillips nar-row pan head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4” or 11/2”. (SN)

12)

12-14x3/4” T-3 PPH

Sheet to steel framing from .036” to .210” total steel thick-ness. T-3. #3 phillips pan head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4” or 11/2”. (SN)

11)12-14x3/4” T-3 HWH

Sheet to steel framing from .036” to .210” total steel thick-ness. T-3. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4”, 1”, 11/4”, 11/2”, 2”, 21/2”, 3”, 4”, 5”, 6” or 8”.

1012-14x3/4” T-2.5 DYNA-GRIP

Framing screw from .035” to .198” total steel thickness. Unique T-2.5, serrated HWH face and other specially designed, proprietary geo-metric features results in the world’s best fram-ing screw, strip-out is practically impossible! 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4” or 1”. (SN)

EXCITINGNEWITEM

9)

12-14x3/4” T-1

Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16 HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 3/4”.

8)

10-16x3/4” T-2 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to steel framing from .035” to .175” total steel thickness. T-2. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 3/4”. (SS)

7)

10-16x3/4” PPH T-2

Sheet to steel framing from .035” to .175” total steel thick-ness. T-2. #2 phillips pan head. Zinc plated. Choose 1/2”, 5/8”, 3/4” or 1”. (SN)

6)

10-16x3/4” T-2 HEFTY-HEX

HEFTY-HEX has a giant head height of 0.2” which is 15-40% larger than other brands. Sheet to steel framing from .035” to .175” total steel thickness. T-2. 5/16” HWH. Zinc plated. Stocked only in 3/4”.

5)

10-16x3/4” T-2

Sheet to steel framing from .035” to .175” total steel thickness. T-2. 5/16” HWH. Coated stocked 3/4” and 11/2”. Zinc plated. Choose 1/2”, 3/4”, 1”, 11/2” or 2”.

4)

10-16x3/4” T-1

Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16 HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 3/4”.

3)

8-18x1/2” T-2 PPH

Sheet to steel framing from .036” to .100” total steel thick-ness. T-2. #2 phillips pan head. Zinc plated. Choose 1/2”, 5/8”, 3/4”, 1”, 11/4” or 11/2” . (SN)

2)

8-18x1/2” T-2 HWH

Sheet to steel framing from .036” to .100” total steel thick-ness. T-2. 1/4” HWH. Zinc plat-ed. Choose 1/2”, 5/8”, 3/4”, 1”, 11/2” or 2”. (SN)

1)

D•F® METAL TO METAL WITHOUT SEALING WASHER

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Coat, D•F & Fenderhead are registered trademarks of Dynamic Fastener Service Inc.

D.F

D.F

14-20x11/2” ® T-5

Steel to structural steel from .250” to .625” total steel thick-ness. (See pg 88). T-5. 3/8” HWH. 5/8” O.D. washer face. Dyna-Coat® 1,000 hour salt spray pre-mium coating. Choose 11/2”, 21/4”, 3”, 4”, 5”, 6”, 8” or 10”.

16)

14-14x7” T-4

These #14 diameter long fas-teners have a 3/8” HWH for most efficient installation of the screws. Install thru insu-lated panels or for retro-fit roofing. #14 diameter 14 TPI fastens to .036” to .375” total steel thickness at connec-tion. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 7” or 10” length. (SN)

15)

14-14x11/2” T-4

Steel to structural steel from .036” to .375” total steel thickness. T-4. 3/8” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked in 11/2”, 7” and 10”.

14)

12-24x11/2” T-5 TORX

Sheet to structural steel from .250” to .500” total steel thick-ness. T-5. #30 Torx low pro-file truss head. Dyna-Coat®

1,000 hour salt spray premi-um coating. Stocked only in 11/2”. (SN)

13)

12-24x11/4” T-5 410 S/S

410 STAINLESS STEEL. (See pg. 86). Steel to structural steel from .250” to .500” total steel thickness. T-5. 5/16” HWH. Select with or without an assembled 9/16” stainless sealing washer. Dyna-Coat® 1,000 hour salt spray pre-mium coating. Choose 11/4” or 2”.

12)12-24x11/4” T-5

Steel to structural steel from .250” to .500” total steel thick-ness. T-5. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 11/4”, 11/2”, 2” or 3”.

11)12-24x1” T-4 410

410 STAINLESS STEEL. (See pg 86). Steel to structural steel from .125” to .375” total steel thick-ness. T-4. 5/16” HWH. Select with or without an assembled 9/16” stainless sealing washer. Dyna-Coat® 1,000 hour salt spray premi-um coating. Stocked only in 1”.

10)12-24x1” T-4

Steel to structural steel from .125” to .375” total steel thick-ness. T-4. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1” or 11/2”.

9)

14-14x1” T-3 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to steel framing from .036” to .250” total steel thickness. T-3. 3/8” HWH. Dyna-Coat® 1,000 hour salt spray pre-mium coating. Select with or without an assembled 5/8” stain-less sealing washer. Choose 1”, 11/2”, 2”, 3”, 4”, 6” or 8”.

8)

14-14x11/4” T-3 5/16” HWH

Unique 5/16” HWH on this #14 dia. T-3 – instead of the stan-dard 3/8” HWH. Sheet to steel framing from .036” to .250” total steel thickness. T-3. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 11/4” or 3”.

7)

14-14x3/4” T-3

Sheet to steel framing from .036” to .250” total steel thickness. T-3. 3/8” HWH. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 3/4”, 1”, 11/4”, 11/2”, 2”, 21/2”, 3”, 4”, 6” or 8”.

6)

14-14x11/4” T-2

Framing screw from .035” to .195” total steel thickness. Unique T-2 (instead of standard T-3 on #14 dia). Serrated HWH face. 3/8” HWH. Dyna-Coat®

1,000 hour salt spray premium coating. Stocked only in 11/4”.

EXCITINGNEWITEM

5)

14-14x7/8” T-1

Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked in 7/8”.

4)

D.F

D.F

12-14x11/4” ® T-3

Integrated giant 5/8” washer face provides twice the bearing area and substantially improved pull-over values. Sheet to steel framing from .036” to .210” total steel thickness. T-3. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/4”.

3)

12-14x3/4” T-3 TAMPERPROOF

Tamperproof torx #30 truss head. Sheet to steel framing from .036” to .210” total steel thickness. T-3. Also stocked 10x3/4”. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4”, 11/4” or 2”. (TP)

2)

12-14x3/4” PAN HEAD BI-METAL

Attaches aluminum to aluminum or alumi-num to steel .036” to .210”. 300 series stain-less head and screw body fused to a carbon steel drill tip. T-3. Pan head #25 torx is ideal for fastening in recessed caulk joints with no “external driver” marring the finished metal. Dyna-Coat ® 1,000 hour salt spray premium coating. Other pan head stocked 10x3/4”, 12x3/4” and 12x11/2”. (See pg. 87). (SS.BM PH)

1)

D•F® METAL TO METAL WITHOUT SEALING WASHER

CALL 800-821-5448 OR FAX 800-844-1199 Dyna-Coat , D•F & Fenderhead are registered trademarks of Dynamic Fastener Service Inc.

14-14x11/4” T-3 ZINC HEAD

ZAMAK-5 ZINC CAST HEAD. (See pg. 86). Sheet to steel framing from .036” to .250” total steel thickness. T-3. 5/16” hex. 150 hour coating. Choose 11/4” or 11/2”. (ZH)

16)


ZAMAK-5 ZINC CAST HEAD. (See pg. 86). Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16” hex. 150 hour coating. Stocked only in 7/8”. (ZH)

15)14-14x7/8” T-1 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to sheet stitch-ing. Total steel thickness .024” to .095”. T-1. Choose 5/16” or 3/8” HWH. 5/8” O.D. stainless wash-er. Dyna-Coat ® 1,000 hour salt spray premium coating. Choose 5/16” or 3/8” HWH.

14)14-14x11/8” S/S CAP

STAINLESS CAP. (See pg. 86). Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16” hex. Screw body has Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 7/8” or 11/8”.

13)

14-14x7/8” T-1 S/S CAP

STAINLESS CAP. (See pg. 86). Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16” hex. Screw body has Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 7/8” or 11/8”.

12)

14-14x11/8” T-1

Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16” hex. U-Seal screws have a rubber ring assembled under the 9/16” wide one piece flange head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 7/8” or 11/8”.

11)

14-14x7/8” U-SEAL T-1

Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. 5/16” hex. U-Seal screws have a rubber ring assembled under the 9/16” wide one piece flange head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 7/8” or 11/8”.

10)

14-14x7/8” T-1 w/w 3/8” HWH

Unique 3/8” HWH on this stitch screw. Sheet to sheet stitching. Total steel thickness .024” to .095”. T-1. 3/8” HWH. 5/8” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Stocked only in 7/8”.

9)

14-14x7/8” T-1 w/w

Sheet to sheet stitching. Total steel thickness .024” to .095”. T-1. Choose 5/16” or 3/8” HWH. 5/8” O.D. washer. Dyna-Coat®

1,000 hour salt spray pre-mium coating. Stocked only in 7/8”.

8)

12-14x1” T-2 ZINC HEAD

ZAMAK-5 ZINC CAST HEAD. (See pg. 86). Sheet to steel fram-ing from .035” to .198” total steel thickness. T-2. 5/16” hex. 150 hour coating. Choose 1”, 11/4”, 11/2” 2” or 3”. (ZH)

7)

12-14x11/4” T-3 410 S/S 3/8” HWH

Unique 3/8” HWH on #12 dia. screw. 410 STAINLESS STEEL. (See pg. 86). Sheet to steel fram-ing from .036” to .210” total steel thickness. T-3. 3/8” HWH. Select with or without stainless sealing washer assembled. Dyna-Coat®

1,000 hour salt spray premium coating. Stocked only in 11/4”. (SS)

6)

12-14x1” T-3 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to steel framing from .036” to .210” total steel thickness. T-3. 5/16” HWH. Select with or without stainless sealing washer assembled. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 3/4”, 1”, 11/4”, 11/2”, 2” or 3”.

5)

12-14x1” T-3 S/S CAP

STAINLESS CAP. (See pg. 86). Sheet to steel framing from .036” to .210” total steel thickness. T-3. 5/16” hex. Screw body has Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1”, 11/4”, 11/2”, 2”, 3”, 4” or 6”.

4)

12-14x11/4” ® T-3

Integrated giant 5/8” washer face provides twice the bear-ing area and substantial ly improved pull-over values. Also acts to hide the 5/8” O.D. metal backed sealing washer. T-3. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/4”.

D.F

D.F

3)

12-14x11/4” U-SEAL T-3

Sheet to steel framing from .036” to .210” total steel thick-ness. T-3. 5/16” hex. U-Seal screws have a rubber ring assembled under the 9/16” wide one piece flange head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4”, 1”, 11/4”, 11/2” or 2”.

2)

12-14x1” T-3 w/w

Sheet to steel framing from .036” to .210” total steel thick-ness. T-3. 5/16” HWH. 9/16” O.D. washer. Dyna-Coat ® 1,000 hour salt spray premium coat-ing. Choose 3/4”, 1”, 11/4”, 11/2”, 2”, 21/2”, 3”, 4”, 5”, 6” or 8”.

1)

D•F® METAL TO METAL WITH SEALING WASHER

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Coat, D•F, & Fenderhead are registered, trademarks of Dynamic Fastener Service Inc.


ZAMAK-5 ZINC CAST HEAD. (See pg. 86). Steel to structural steel from .250” to .500” total steel thickness. T-5. 5/16” hex. Stocked only in 11/4”.

16)

12-24x11/4” T-5 410 S/S

410 STAINLESS STEEL. (See pg. 86). Steel to structural steel from .250” to .500” total steel thickness. T-5. 5/16” HWH. Select with or with-out an assembled 9/16” O.D. stain-less sealing washer. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 11/4” or 2”.

15)

12-24x11/2” T-5 S/S CAP

STAINLESS CAP. (See pg. 86). Steel to structural steel from .250” to .500” total steel thick-ness. T-5. 5/16” hex. Screw body has Dyna-Coat ® 1,000 hour salt spray premium coating. Choose 11/2”, 2” or 3”.

14)

12-24x11/2” T-5 w/w Torx

Sheet to structural steel from .250” to .500” total steel thick-ness. T-5. #30 torx low profile truss head. 15/32” O.D. wash-er. Dyna-Coat ® 1,000 hour salt spray premium coating. Stocked only in 11/2”.

13)

14-20x11/2” ® w/w

Steel to structural steel from .250” to .625” total steel thick-ness (see pg. 88). T-5. 3/8” HWH. 5/8” O.D. washer. Dyna-Coat ® 1,000 hour salt spray premium coating. Choose 11/2”, 21/4”, 3”, 4”, 5”, 6”, 8” or 10”.

D.F

D.F

12)

14-14x11/2” T-4 w/w

Steel to structural steel from .036” to .375” total steel thick-ness. 3/8” HWH. 5/8” O.D. wash-er. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked in 11/2”, 7” and 10”.

11)

12-24x11/4” T-5 w/w

Steel to structural steel from .250” to .500” total steel thick-ness. T-5. 5/16” HWH. 9/16” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 11/4”, 11/2”, 2” or 3”.

10)

12-24x1” T-4 w/w

Steel to structural steel from .125” to .375” total steel thick-ness. T-4. 5/16” HWH. 9/16” O.D. washer. Dyna-Coat ® 1,000 hour salt spray premium coat-ing. Choose 1” or 11/2”.

9)


Tamperproof torx #30 truss head. Sheet to sheet stitching. Total steel thickness of .024” to .095”. T-1. Order with or with-out assembled 7/16” O.D. wash-er. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 7/8”. (TP)

8)


Tamperproof torx #30 truss head. Sheet to steel framing from .036” to .210” total steel thickness. T-3. Order with or without assembled 7/16” O.D. washer. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 11/4” or 2”. (TP)

7)

14-14x3/4” TORX T-1

Sheet to sheet stitching. Total steel thickness .024” to .095”. T-1. #30 Torx low profile truss head. 7/16” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 3/4”.

6)

12-14x11/4” TORX T-3

Sheet to steel framing from .036” to .210” total steel thick-ness. T-3. #30 torx low profile truss head. 7/16” O.D. wash-er. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1”, 11/4”, 11/2”, 2” or 31/2”.

5)

14-14x1” T-3 410 S/S

410 STAINLESS STEEL. (See pg. 86). Sheet to steel framing from .036” to .250” total steel thickness. T-3. 3/8” HWH. Dyna-Coat® 1,000 hour salt spray pre-mium coating. Select with or with-out an assembled 5/8” O.D. stain-less sealing washer. Choose 1”, 11/2”, 2”, 3”, 4”, 6” or 8”.

4)

14-14x11/4” U-SEAL T-3 5/16” HEX

Unique 5/16” hex head on this #14 dia. T-3 – instead of the standard 3/8” hex. Sheet to steel framing from .036” to .250” total steel thickness. T-3 5/16” hex. U-Seal. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/4”.

3)

14-14x11/4” T-3 w/w 5/16” HWH

Unique 5/16” HWH on this #14 dia. T-3 - instead of the stan-dard 3/8” HWH. Sheet to steel framing from .036” to .250” total steel thickness. T-3. 5/16” HWH. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 11/4” or 3”.

2)

14-14x1” T-3 w/w

Sheet to steel framing from .036” to .250” total steel thick-ness. T-3. 3/8” HWH. 5/8” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 3/4”, 1”, 11/4”, 11/2”, 2”, 21/2”, 3”, 4”, 6” or 8”.

1)

D•F® METAL TO METAL WITH SEALING WASHER

CALL 800-821-5448 OR FAX 800-844-1199 Dyna-Coat & D•F are registered trademark of Dynamic Fastener Service Inc.

12x11/4” T-3 ZINC

Standing seam clips or archi-tectural clips to steel. Total steel thickness .036” to .210”. T-3. #2 phillips pancake head. Zinc plated. Choose 3/4” or 11/4”. (CSD)

16)

10-16x1” DYNA-COAT TORX T-2

Standing seam or architectural clips to steel. Total steel thick-ness .035” to .175”. T-2. #25 torx. Dyna-Coat ® 1,000 hour salt spray premium coating. Stocked only in 1”. (CSD)

15)

10-16x1” DYNA-COAT PHIL T-2

Standing seam clips or architectural clips to steel. Total steel thickness .035” to .175”. T-2. #2 phillips. (Torx #25 also stocked, 1” only). Dyna-Coat® 1,000 hour salt spray premi-um coating. Choose 5/8”, 3/4” or 1”.

14)

10-16x1” ZINC PHIL T-2

Standing seam clips or archi-tectural clips to steel. Total steel thickness .035” to .175”. T-2. #2 phillips. 12x3/4” also stocked. Zinc plated. Stocked only in 1”. (CSD)

13)

14-10x11/4” DYNA-COAT PHIL T-17

Standing seam clips or archi-tectural clips to wood. Type-17 point. #3 phillips. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/4”. (CSA)

12)

12-11x11/4” S/S TRUSS HEAD

Panel or flashing to wood or metal where a non-rusting, aesthetic look is required. Excellent for FRP. Type-17 point. #25 torx. 300 series stainless steel. Choose 11/4” or 2”. (AS12)

11)

12-11x11/4” STAINLESS

Standing seam clips or archi-tectural clips to wood. Type-17 point. #25 torx. 300 series stainless steel. Choose 3/4”, 11/4”, 2” or 3”. (CSB)

10)

12-11x11/4” DYNA-COAT TORX T-17

Standing seam clips or archi-tectural clips to wood. Type-17 point. #25 torx. Dyna-Coat®

1,000 hour salt spray premium coating. Stocked only in 11/4”. (CSA)

9)


Standing seam clips or archi-tectural clips to wood. Type-17 point. #2 phillips. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 11/4”, 2”, 3”, 41/2” or 6”. (CSA)

8)

12-11x11/4” ZINC PHIL T-17

Standing seam clips or archi-tectural clips to wood. Type-17 point. #2 phillips. Zinc plated. Stocked only in 11/4”. (CSA)

7)

10-12x2” PHIL STAINLESS

Standing seam clips or archi-tectural clips to wood. Type-17 point. #2 phillips wafer head. 300 series stainless. Choose 1” or 2”. (CSB)

6)

10-11x1” STAINLESS

Standing seam clips or archi-tectural clips to wood. Type-17 point. #25 torx pancake head. 300 series stainless steel. Choose 1”, 11/2” or 2”. (CSB)

5)

10-12x1” DYNA-COAT TORX T-17

Standing seam clips or archi-tectural clips to wood. Type-17 point. #25 torx. Dyna-Coat®

1,000 hour salt spray premium coating. Stocked only in 1”. (CSA)

4)

10-12x1” DYNA-COAT PHIL T-17

Standing seam clips or archi-tectural clips to wood. Type-17 point. #2 phillips. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 1” or 11/2”. (CSA)

3)

10-12x1” ZINC PHIL T-17

Standing seam clips or archi-tectural clips to wood. Type- 17 point. #2 phillips. Zinc plat-ed. Choose 1” or 11/2”. (CSA)

2)


Standing seam clips or archi-tectural clips to wood. Type-17 point. #2 phillips. 300 series stainless steel. Choose 1/2”, 3/4” or 11/4”. (CSB)

1)

D•F® CLIP SCREWS

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Coat & D•F are registered trademarks of Dynamic Fastener Service Inc.

12-13x15/8” PHILLIPS ROOFSCREW

Selfdrills into steel (16 ga. to 24 ga.) and wood. T-2. #3 phil-lips flat truss head. 200 hour salt spray coating. Choose 15/8”, 21/4”, 27/8”, 31/4”, 33/4”, 41/2”, 5”, 6”, 7” or 8”. (RS)

16)

12-13x15/8” HEX ROOFSCREW

Selfdrills into steel (16 ga. to 24 ga) and wood. T-2. 1/4” HWH. 200 hour salt spray coating. Choose 15/8”, 21/4”, 27/8”, 31/4”, 33/4”, 41/2” 5”, 6”, 7” or 8”. (RH)

15)

14x2” T-1 S/S

Modif ied 410 STAINLESS STEEL attaches to wood or up to .048” metal. #3 phillips low profile Truss head. Choose 11/2”, 2”, 3”, 4”, 5”, 6” or 7”. (RS)

14)

12x4” T-1 DI

TYPE DI screws designed for structural insulated panels self drills into wood or up to .048” metal. Large pancake head. #30 torx drive. 200 hour salt spray coating. Choose 3”, 4”, 41/2”, 5”, 6”, 7”, 8”, 9”, 10”, 11” or 12”. (CSDH)

13)

12-24x3” BI-METAL T-4.5

BI-METAL. (SEE PG 87) Use this screw when wood is green treated lumber, ACQ or whenever wood is corrosive. Screw attaches wood to .060” to .275” thick steel. T-4.5. #3 PFH. 300 series head and body fused to carbon steel body and drill tip. Dyna-Coat ® 1,000 hour salt spray premium coating. Stocked only in 3”. (SS BM HT)

12)

14-20x3” T-4.5

Wood to .125” to .275” thick steel. Use 3” screw for 5/8” to 13/4” thick wood, or 33/4” screw for 13/8” to 21/2” thick wood. T-4.5. #3 PFH. Never use winged screws in steel that is light-er than 16 gauge. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3” or 33/4”. (HT)

11)

12-24x21/4” T-4.5

Wood to .125” to .275” thick steel. 21/4” screw for 1/2” to 1” wood or 3” screw for 5/8” to 13/4” wood. T-4.5. #3 PFH. Never use winged screws in steel that is lighter than 16 gauge. Dyna-Coat®

1,000 hour salt spray premium coat-ing. Choose 21/4” or 3”. (HT)

10)

10-24x19/16” T-3

1/4” to 3/4” wood to .060” to .175” thick steel. T-3. #2 PFH extra wide head. Never use winged screws in steel that is lighter than 16 gauge. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 19/16”. (HT)

9)

10-16x113/16” T-3

1/4” to 3/4” wood to .036” to .175” thick steel. Eight nibs under head. T-3. #2 PFH. Dyna-Coat ® 1,000 hour salt spray premium coat ing. Stocked only in 113/16”. (HT)

8)

12-14x11/4” PFH T-3

Wood to .036” to .210” thick steel. T-3. #3 PFH. Zinc plated. Choose 11/4” or 2”. (HT)

7)


Standing seam clips or archi-tectural clips to steel. Total steel thickness .036” to .250”. T-3. #3 phillips. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/4”.

6)

12-14x1” DYNA-COAT POSI-DRIVE

Standing seam clips or architec-tural clips to steel. Total steel thickness .036” to .210”. T-3. #2 posi-drive Dyna-Coat ® 1,000 hour salt spray premium coating. Stocked only in 1”. (CSD)

5)


Standing seam clips or architec-tural clips to steel. Total steel thickness .036” to .210”. T-3. #25 torx. 410 series stainless steel. Choose 3/4”, 11/4”, 2” or 3”. (CSE)

4)


Standing seam clips or architectur-al clips to steel. Total steel thick-ness .036” to .210”. T-3. #2 phillips. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1”, 11/4”, 2”, 3”, 41/2” or 6”. (CSD)

3)

12-14x11/4” DYNA-COAT TORX T-3

Standing seam or architectural clips to steel. Total steel thick-ness .036” to .210”. T-3. #25 torx. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/4”. (CSD)

2)

12-14x1” MODIFIED PFH T-3

1/4” to 5/8” wood to .036” to .210” thick steel. T-3. Modified PFH, #3 phillips. Zinc plated. Stocked only in 1”. (HT)

1)

D•F® WOOD TO METAL & MORE


17-10x11/2” 3/8” HWH

Unusual large diameter sheet metal to wood or sheet to sheet, up to .048” thick steel. Type 17 point. 3/8” HWH. Choose with 5/8” O.D. washer or without. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 11/2”. (MW)

16)

14-10x1” 3/8” HWH W/O/W

Sheet metal to wood or sheet to sheet, up to .048” thick steel. Type A. Type-17 point. 3/8” HWH without 5/8” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 3/4”, 1”, 11/2”, 2”, 21/2”, 3”, 4”, 6”, 8” or 10”. (AC)

15)

14-10x1” 3/8” HWH

Sheet metal to wood or sheet to sheet, up to .048” thick steel. Type A. Type-17 point. 3/8” HWH with 5/8” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4”, 1”, 11/2”, 2”, 21/2”, 3”, 4”, 6”, 8” or 10”. (AC)

14)

14-10x1” 5/16” HWH

Sheet metal to wood or sheet to sheet, up to .048” thick steel. Type-17 point. 5/16” HWH. 5/8” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1”, 11/2” or 2”. (MW)

13)

14-10x11/2” T-17 ZINC HEAD

ZAMAK-5 ZINC CAST HEAD. Up to 18 gauge sheet metal to wood or sheet to sheet, up to .048” thick steel. Type-17. 5/16” hex. Choose 11/2” or 2”. (ZH)

12)

12-11x1” TORX

Trim fastener. Fasten sheet to wood or sheet to thin steel up to .036” thick without pre-drill-ing. Torx 27 low profile button head. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 1”. (AC)

11)

12-11x3/4” S/S CAP

STAINLESS CAP. Use to stitch metal sheet to sheet. 1/4” hex. Stocked only 3/4”. (MWS)

10)

12-11x3/4” STITCH

Use to stitch metal sheet to sheet. 1/4” HWH. 1/2” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Stocked only 3/4”. (MW)

9)

10-16x11/2” ZINC HEAD

ZAMAK-5 ZINC CAST HEAD. Up to 18 gauge sheet metal to wood. Hi-Lo threads. Type-17 point. 5/16” hex head except choose 1/4” or 5/16” hex head on the 1”. Also stock 9x11/2”. Choose 1”, 11/2”, 2”, 21/2” or 3”. (ZH)

8)

10-15x11/2” T-17 S/S CAP

STAINLESS CAP. Up to 18 gauge metal to wood. Hi-Lo threads. Type-17 point. 1/4” hex head. Screw body has Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1”, 11/2”, 2” or 3”. (SS)

7)


Up to .050” aluminum or 24 gauge sheet metal to wood. Type-17 point. 1/4” HWH. 1/2” O.D. stainless washer. 100 hour salt spray. Choose 1”, 11/2”, 2”, 21/2” or 3”. (MW)

6)

10-16x11/2” TRUSS HEAD

Low profile Truss head. Up to 18 gauge sheet metal to wood. #25 torx. Hi-Lo threads. T-17. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1”, 11/2”, 2” or 3”. (MW)

5)

12-16x11/2” T-17 HI-LO

Up to 18 gauge sheet metal to wood. Type-17. Hi-Lo threads. 5/16” HWH. 9/16” O.D. sealing washer. Dyna-Coat ® 1,000 hour salt spray premium coat-ing. Choose 11/2”, 2”, 3” or 4”. (MW)

4)

10x11/2” T-1 DUAL THREAD

Up to 16 gauge sheet metal to wood. 1/4” HWH. Choose with or without 1/2” O.D. wash-er. Dyna-Coat ® 1,000 hour salt spray premium coating. Stocked only in 11/2”. (MW)

3)

10-16x11/2” POLE BARN

Up to 18 gauge sheet metal to wood. 1/4” HWH. Hi-Lo threads. Type-17 point. Dyna-Coat® 1,000 hour salt spray premium coating for corrosion resistance. Choose 1”, 11/2”, 2”, 21/2” or 3”. (MW)

2)

9-14x11/2” POLE BARN

Up to 18 gauge sheet metal to wood. Fast (11/2 seconds) drill time. 1/4” HWH. 1/2” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coat-ing. Choose 1”, 11/2”, 2”, 21/2” or 3”. Also stock 12x3/4”. (MW)

1)

D•F® LIGHT GAUGE METAL TO WOOD

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Coat & D•F are registered trademarks of Dynamic Fastener Service Inc.

HARDY-HEX™ is a trademark of Dynamic Fastener Service Inc.

10x3/4” HVAC HWH SCREW

Exceptionally sharp pointed screw for sheet to duct work up to .048” max thickness with-out pre-drilling. Extra stout 5/16” head, dual threads, serrated face to avoid strip-out. Zinc plated. Stocked only in 3/4” (AC)

16)10x3/4” HVAC WAFER HEAD

Exceptionally sharp pointed screw for sheet to duct work up to .048” max thickness without pre-drilling. #2 phillips wafer head, dual threads, serrated face to avoid strip-out. Zinc plated. Stocked only in 3/4”. (AC)

15)10x3/4” HARDY HEX™

HARDY-HEX™, almost a full 1/4” tall head height to keep the screw head in the socket while driving screws at steep angles. Sheet to duct work up to .036” max thickness without pre-drilling. 5/16” slotted HWH. Zinc plated. Choose 3/4” or 11/2”. (ZI)

14)

10-12x3/4” HVAC SCREW

Sheet to duct work up to .036” max thickness with-out pre-drilling. Selectively stocked with 1/4” hex &/or 5/16” hex. Selectively stocked hex slotted &/or hex unslotted. Zinc plated. Choose 3/4”, 1”, 11/2” or 2”. (ZI)

13)

8-15x1/2” HVAC 410 S/S

Use when 410 stainless steel is required or beneficial. Sheet to duct work up to .036” max thickness without predrilling. 1/4” HWH – not slotted. Dyna-Coat® 1,000 hour salt spray pre-mium coating. Stocked only in 1/2”. (ZI)

12)

8-15x23/64” HVAC SCREW

Sheet to duct work up to .036” max thickness without pre-drill-ing. 1/4” hex head. Selectively stocked hex slotted &/or hex unslotted. Zinc plated. Choose 1/2”, 3/4”, 1”, 11/2” or 2”. (ZI)

11)

23/64x1 SCRUBOLT

Steel to steel. Requires a pre-punched or pre-drilled hole. (See pg. 95 for hole dia to drill). Choose 3/8” HWH or #45 torx pan head. Choose 11/32” or 23/64” diam-eter. Stocked from 7/8” to 6” long. (See pg. 95 for more info). (SC)

10)17-14x1” AB ZINC HEAD

ZAMAK-5 ZINC CAST HEAD. Used to plug a hole that was previously occupied by a #14 diameter screw. Type AB. 3/8” hex. Choose with or without 5/8” O.D. washer. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1” or 11/2” . (ZH)

9)

17-14x1” AB S/S CAP

STAINLESS CAP. Used to plug a hole that was previous-ly occupied by a #14 screw. Type AB. 5/16” hex. Screw body has Dyna-Coat® 1,000 hour salt spray premium coating. Choose 1” or 11/2”.

8)17-14x3/4” TYPE AB

Used to plug a hole that was previously occupied by a #14 diameter screw. Type AB. 3/8” hex. Choose 5/16” or 3/8” hex on 1”. Choose with or without 5/8” O.D. washer. Can assemble 3/4”, 1” or 11/2” O.D. washer. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 3/4”, 1” or 11/2”. (BC)

7)

14-14x1” AB S/S CAP

S T A I N L E S S C A P . S h e e t metal to 14 gauge or heavi-er steel. Type AB. Pre-drilling is required. 5/16” hex head. Choose 1” or 11/2”. (SS)

6)

14-14x1” AB ZINC HEAD

ZAMAK-5 ZINC CAST HEAD. Sheet metal to 14 gauge or heavier steel. Type AB. Pre-drilling is required. 5/16” hex head. Choose 1” or 11/2”. (ZH)

5)

14-14x11/2” TYPE B STAINLESS

300 SERIES STAINLESS. Sheet metal to 14 gauge or heavier steel. Pre-drilling is required. Selectively stocked in Type B or AB. 3/8” hex. 5/8” O.D. S/S washer. Also stock #17 S/S AB. Choose 3/4”, 1”, 11/2”, 2”, 21/2”, 3”, 4”, 5”, or 6”.

4)14-14x11/2” TYPE AB

Sheet metal to 14 gauge or heavier steel. Type AB. 3/8” hex. Pre-drilling is required. With 5/8” O.D. sealing washer. 23/4” and 33/4” are type B. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 3/4”, 1”, 11/2”, 2”, 23/4”, 33/4” , 6”, 8” or 10”.

3)

14-14x1” TYPE B

Sheet metal to 14 gauge or heavier steel. Type B. Pre-drilling is required. Product is frequently more readily avail-able as a Type-AB (box to right). Zinc plated. Choose 3/4”, 1”, 11/2”, 2”, 23/4”, 33/4”, 5”, 6” or 8”. (BC)

2)

14-10x1” TYPE A STAINLESS

300 SERIES STAINLESS. Sheet metal to wood or sheet to sheet, up to .048” thick steel. Pre-drilling is normally required. Type A. ONLY 1” has Type-17 point. 3/8” hex. 5/8” O.D. S/S washer. Choose 3/4”, 1”, 11/2”, 2”, 3”, 4”, 5”, 6”, 7” or 8”. (AS)

1)

D•F® SELF-TAPPING SCREWS & MORE

Dyna-Coat , D•F & DYNA-CON are registered trademarks of Dynamic Fastener Service Inc. CALL 800-821-5448 OR FAX 800-844-1199

FAC-10-4 FABLOK

Use to attach metal panels to structural steel where heavy internal movement occurs from operating machinery or excessive external movement occurs from high winds, jet engines,... (see pg 94). 6 varieties stocked. (FL)

16)

GROMMET FOR FIBERGLASS

Attaches fiberglass to steel. Typical use to attach fiberglass skylights to metal roof panel. Pre-drill 1/4” hole. Black neoprene grommet with concealed brass nut. 6-32x11/4” stainless machine bolt. Stocked only 1/4x1”. (SS)

15)

3/16”x.250 OLYMPIC RIVET

Olympic bulb-tite rivets provide high strength, high clamping force and multi-grip capabilities. Can be installed in fiberglass without crazing and plastics without cracking. They cannot be overdriven and cannot strip out. Aluminum rivet and aluminum mandrel with EPDM washer for pos-itive water tight resistance. Choose 3/16”, 1/4” or 9/32” dia. (see pg. 91). (OR)

14)

1/4-20x11/4” STAINLESS

Stainless hex cap screw. 3/8” hex head. F593A. Manufactured domesti-cally. Machined from annealed mate-rial & then re-annealed. Close-out price limited to stock on hand. Nut and washer cost extra. (MB)

CLOSE-OUT PRICE $120/m

BELOWCOST

BLOWOUT

13)

1/4x13/8” ZINC HEAD FOR CONCRETE

DYNA-CON ® concrete screws attaches item to concrete, block or brick. Unique Zamak-5 zinc cast head will never red rust. Embedded depth in ordinary concrete is 1” min. to 13/4” max depth. 5/16” hex. Stocked only in 13/8”. (TC)

12)

1/4x13/8” S/S CAP FOR CONCRETE

DYNA-CON ® conc re te sc rews attaches item to concrete, block or brick. Unique 300-series stainless HWH cap that will never red rust. Embedded depth in ordinary concrete is 1” min. to 13/4” max depth. 5/16” hex. 1/4” dia. Stocked only in 13/8”. (TC)

11)

1/4x11/4” CONCRETE SCREW

At taches i tem to conc re te . Embedded depth in ordinary con-crete is 1” min. to 13/4” max depth. Choose head style of HWH or PFH. Choose 3/16” or 1/4” diameter. Anchor length in; 3/16” dia. is 11/4” to 4” or 1/4” dia is 11/4” to 6”. (TC)

10)

1/4-20x1” T-3

(See pg. 100). Hang 1/4-20 or 3/8-16 all thread from .060” to .250” thick steel. Must use backside retainer nut for .075” and thinner steel. Zinc plated. Specify vertical mount or hor-izontal mount. Choose 1/4” or 5/16” diameter. (HM)

9)

5/16-12x1” T-3 w/w

Largest diameter self-driller available in the market. Attach steel to steel from .036” to .3125” total steel thickness. T-3. 3/8” HWH. Dyna-Coat ®

1,000 hour salt spray premium coating. Choose 1” or 11/2”.

8)

5/16-18x15/16” T-3

Largest diameter selfdriller available on the market. Attach steel to steel from .036” to .3125” total steel thickness. T-3. 3/8” HWH. Dyna-Coat®

1,000 hour salt spray premium coating. Choose 1” or 11/4”.

7)

18-9x1” T-1 w/w

Sheet to sheet stitching. Total steel thickness .024” to .095”. T-1. 5/16” HWH. 5/8” O.D. washer. Dyna-Coat ®

1,000 hour salt spray premium coating. Stocked only in 1”.

6)

12-14x1” T-3 BI-METAL

BI-METAL. (See pg. 87). Attaches aluminum to aluminum or aluminum to steel .036” to .210”. 300 series stainless head and screw body fused to a carbon steel drill tip. T-3. 5/16” HWH. Choose with or without 9/16” O.D. stainless washer. Dyna-Coat® 1,000 hour salt spray premi-um coating. Choose 1”, 11/2” or 2”. (SS BM)

5)

14-14x11/4” T-3 SHOULDER

Unique unthreaded shoulder under the head facilitates the need of a fastened clip to “float’. Commonly used in rake plate detail and with other clips. Steel to steel framing from .036” to .250” total steel thick-ness. T-3. 5/16” HWH. Dyna-Coat®

1,000 hour salt spray premium coating. Stocked only 11/4”.

4)

12-14x17/8” S/S CAP

STAINLESS CAP. Attaches 3” to 6” of blanket insulation to steel framing from .036” to .210” thick steel. T-3. 5/16” hex. Dyna-Coat ® 1,000 hour salt spray premium coating. on screw body. Stocked only 17/8”. (SS)

3)

12-14x17/8” INTERIOR T-3

SEE PG 57. Attaches rigid insulation to steel framing from .036” to .210” thick steel. T-3. 5/16” HWH.11/4” O.D. HDPE wash-er. Dyna-Coat ® 1,000 hour salt spray premium coating. Choose 17/8”, 23/8”, 31/4” or 4”. (IS)

2)

12-14x17/8” EXTERIOR T-3

SEE PG 57. Attaches rigid insulation to steel framing from .036” to .210” thick steel. T-3. 5/16” HWH. 5/8” O.D. wash-er. Dyna-Coat ® 1,000 hour salt spray premium coating. Choose 17/8”, 23/8”, 31/4” or 4”. (IS)

1)

D•F® INSULATION SCREWS & MORE

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Coat & D•F are registered trademarks ofDynamic Fastener Service Inc.

8-18x3/4” WAFER HD T-2 w/w

Fasten into steel from .036” to .100” total steel thickness. Assembled 1/2” O.D. metal backed rubber seal-ing washer to prevent leakage on an exterior application. T-2. #2 phillips. Lengths 21/2” and longer are #10 diam-eter. Zinc plated. Choose 1/2”, 3/4”, 1”, 11/4”, 15/8”, 2”, 21/2”, 3” or 4”. (DW)

16)8-18x3/4” WAFER HD SHARP w/w

Fasten into wood or thin steel up to .048”. Assembled 1/2” O.D. metal backed rubber sealing washer to pre-vent leakage on an exterior applica-tion. Sharp point. #2 phillips. Lengths 21/2” and longer have a T-17 point and are #10 diameter. Zinc plated. Choose 1/2”, 3/4”, 1”, 11/4”, 15/8”, 2”, 21/2”, 3” or 4”. (DW)

15)8-18x3/4” WAFER HEAD T-2

Fasten into steel from .036” to .100” total steel thickness. Wafer head lath screw has large head for increased bearing area, but with a low profile. T-2. #2 phillips. Lengths 21/2” and lon-ger are #10 diameter. Zinc plated. Choose 1/2”, 3/4”, 1”, 11/4”, 15/8”, 2”, 21/2”, 3” or 4”. (DW)

14)

8-18x3/4” WAFER HEAD SHARP PT

Fasten into wood or thin steel up to .048” thick. Wafer head lath screw has large head for increased bear-ing area, but with a low profile. Sharp point. #2 phillips. Lengths 21/2” and longer have a T-17 point and are #10 diameter. Zinc plated. Choose 1/2”, 3/4”, 1”, 11/4”, 15/8”, 2”, 21/2”, 3” or 4”. (DW)

13)

8-18x3/4” T-2 LATH 410 S/S w/w

410 stainless steel. Sheet to steel framing from .036” to .100” total steel thickness. Assembled 1/2” O.D. stainless steel backed rubber seal-ing washer to prevent leakage on an exterior application. T-2. #2 phil-lips lath head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4” or 11/4”. (SS8)

12)

8-18x3/4” T-2 LATH 410 S/S

410 stainless steel. Sheet to steel framing from .036” to .100” total steel thickness. T-2. #2 phillip lath head. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 3/4” or 11/4”. (SS8)

11)

10-16x3/4” T-3 410 S/S UNDERCUT

410 stainless steel. The flat undercut #2 phillips head is perfectly mated for attaching certain clips. Also available in all 300 stainless - see top of pg 87. Fastens .036” to .210” total steel thickness. T-3. Stocked only in 3/4”.(SS)

10)

10-16x1/2” T-2 FLAT TRUSS

Pre-punched brackets to steel-perfect for door frames. Total steel thickness .035” to .175”. T-2. #2 phillips flat truss head. Serrated face. Zinc plat-ed. Stocked only in 1/2”. (DW)

9)

8-18x3/4” PFH 410 S/S

410 stainless steel. Steel with pre-punched countersunk holes to steel from .036” to .100” steel thickness. T-2. #2 PFH. Also available in all 300 stainless for aluminum - see top of pg 87. Dyna-Coat® 1,000 hour salt spray premium coating. Stocked only in 3/4”. (SS8)

8)

12-11x1” T-4 300 STAINLESS

Aluminum to aluminum or composite to aluminum .048” to .250” material thickness. Screw is COMPLETELY 300 series stainless. Unique 11 TPI tri-lobular thread ideal for tapping and holding in aluminum. T-4. #25 torx pancake head. Dyna-Coat ®

1,000 hour salt spray premium coat-ing. Stocked only in 1”. (SS)

7)

12-14x1” BI-METAL SCREW

SEE PG 87. BI-METAL. Aluminum or composite to aluminum or to steel. Select with or without an assembled stainless sealing wash-er. Dyna-Coat ® 1,000 hour salt spray premium coating. See pg 87 for size options. (SS)

6)

12-14x1” T-3 300 STAINLESS

Aluminum to aluminum or composite to aluminum .048” to .250” material thickness. Screw is COMPLETELY 300 series stainless. T-3. 5/16” HWH. Select with or without an assembled 9/16” stainless sealing washer. Dyna-Coat ® 1,000 hour salt spray premium coating. Stocked only in 1”. (SS)

5)

8x11/4” STAINLESS

SEE PG 86. Wood to wood. Type-17 point. #2 square drive modified bugle head. 2” and shorter are #8 diameter. 21/2” and longer are #10 diameter. 300 series stainless steel. Choose 11/4”, 15/8”, 2”, 21/2”, 3”, 31/2” or 4”. (DK)

4)8x11/4” DECKING SCREW

SEE PG 86. Wood to wood. Type-17 point. #2 square drive modified bugle head. 2” and shorter are #8 diameter. 21/2” and longer are #10 diameter. Dyna-Coat® 1,000 hour salt spray pre-mium Coating. Choose 11/4”, 15/8”, 2”, 21/2”, 3”, 31/2” or 4”. (DK)

3)SELF-DRILL DRYWALL SCREWS

Drywall to heavy gauge steel studs 20-12 gauge steel thick-ness. Phillips bugle head or trim head. Choose 1”, 11/8”, 11/4”, 15/8”, 17/8”, 2”, 21/4”, 21/2” or 3”.

2)SHARP POINT DRYWALL SCREWS

Drywall to 26-20 gauge steel (standard/fine thread) or dry-wall to wood stud (coarse thread). #2 phill ips bugle head. Choose 1” , 1 1/ 8” , 11/4”, 15/8”, 17/8”, 2”, 21/4”, 21/2” or 3”.

1)

D•F® ALUMINUM TO ALUMINUM & MORE

CALL 800-821-5448 OR FAX 800-844-1199

The standard roof screw is #12 diameter with a #3 Phillips or 1/4” hex head. Available from 15/8” to 8”. Excellent fastener for 16 to 24 gauge steel deck, wood, plywood and OSB. They have a long life coating that is typically black. Both feature a unique backout resistant thread design. Typical back-out in 18-24 ga. steel deck is 10 – 14 in. lbs.

Heavy duty #14 diameter roof screws have a #3 Phillips head. Available from 11/2” to 12”. Use in metal (16 ga. to 24 ga.), wood, plywood or concrete. For concrete a pre-drill of 3/16” diameter is required. Minimum embedment in concrete is 1”. They have a long life coating that is typically black.

Extra heavy duty #15 diameter roof screws have a #3 Phillips head. Available from 11/4” to 24”. Use in metal (18 ga. to 22 ga.), wood, plywood or concrete. For concrete a pre-drill of 7/32” diameter is required. Minimum embedments in concrete is 1”. They have a long life coating that is typically black.

• FM and Metro-Dade County approved• Coating meets or exceeds FM4470 corrosion standards• Can be used with either steel or plastic stress plates

These screws for structural insulated panels have a large pancake head with a #30 torx drive. The DI style screw can self-drill metal up to 18 gauge. It is designed for corrugated steel deck and wood applications. DI style screws available from 3” to 18”.

PURLIN FASTENERSThese #14 diameter long fasteners have a 3/8” HWH for most efficient installation of the screws. Install thru insulated panels or for retro-fit roofing. #14 diameter 14 TPI fastens to .036” to .375” total steel thickness at connection. Dyna-Coat® 1,000 hour salt spray premium coating. Choose 7” or 10” length.

#12 PHILLIPS

#12 HEX

#14 PHILLIPS

#15 PHILLIPS

SINGLE-PLY ROOFSCREWS

STRUCTURAL INSULATEDPANEL FASTENER

TP

DI

HD

PURLIN FASTENERSThese #12 fasteners are designed to attach single-ply membrane systems to structural steel purlins up to 3/16” thick. They feature a low profile #3 square drive pancake head and coating that meets or exceeds FM4470. Allow a minimum 3/4” penetration through the purlin. For best drilling results install no faster than with an 1800 rpm screwgun.

O/A Length Usable Length Thread Length

13/8” 3/4” 3/4” 23/4” 2” 2” 33/4” 3” 25/8” 43/4” 4” 25/8” 53/4” 5” 25/8” 63/4” 6” 25/8” 73/4” 7” 25/8”

Pull-out Values in Steel

3/16 thick - 2000 lbs.**

12 Ga. - 1200 lbs.

16 Ga. - 500 lbs.

18 Ga. - 375 lbs.

** Tester’s maximum reading is 2000 lbs.

ROOFING FASTENERS TRUFASTTRUFAST


You are now able to use our D•F super-thick, high quality plastic bags around your shop. If you will buy in full box quantity, then we’ll sell them to you under our actual true costs - as per below. Any “full-case” purchased is cheap, under $75. Must buy in full pak or case qty. (ZZ)

Price/Each Bag PLASTIC BAG CASE 100 FULLDESCRIPTION THICKNESS QTY PAK CASE

4.4x6” Zipper 4.7 mil 1,000 $.088 $.0734.4x8” Zipper 4.7 mil 800 .100 .083 10x12.4” 6.0 mil 300 .23 .191-side open

D•F®

PLASTICBAGS

Dyna-Coat and D•F headed screws are registered trademarks of Dynamic Fastener Service Inc.

WANT TO SLASH YOUR HIGH COST OF LABOR? Ultra-premium D•F brand self-drilling screws typically drill in half the time as compared to all of the other brand screws that they were tested against. That translates to a 50% cost reduction in your labor costs with respect to the time that you budget for drilling screws. Just like the finest quality, most expensive drill bits on the market – D•F brand screws work best when one allows the precision made screws to perform the work and the drilling. The operator should apply only about 35 lbs. of pressure. Many of our competitors’ screws ONLY work if the opera-tor “sits-on” the screw during the drilling process, frequently exerting over 100 lbs. of force. (And just like the finest drill bits, D•F screws do not perform under these barbaric con-ditions). This labor intensive drilling process results in: A) excessive operator fatigue; B) higher fastener failure due to point burn-out because of the excessive heat build-up; C) unsafe working conditions if the operator is leaning from the side of a ladder yet trying to generate the neces-sary forces to allow the inferior screws to drill; D) shortened tool life due to heavier work load; E) higher labor dollars due to slower drill times. If you want to sit on something then go find a park bench. But if you want to realize all of the advantages detailed above then specify D•F brand screws on all of your proj-ects. Plus, most D•F brand self-drilling screws come standard with Dyna-Coat ® a 1,000 hour salt spray premium coating. D.F screws have taller, stout hex heads which create better engagement with the socket facilitating a more efficient drilling operation. Under totally unbiased laboratory conditions* drill times were tested for three different screw manufacturers. The three manufacturers were Dynamic Fastener, “Brand X” and “Brand Y”. X and Y are two of the most well known screw manufacturers in the self drilling market. The test results were as follows:

Unbelievably, D•F screws were TWICE as fast as the sec-ond best screw manufacturer. Even worse, (for our com-petition) the 3rd place screw failed. It literally could not drill with just 34 lbs. of force. In addition, to see how superior the drill point of the D•F screws is vs. the competition, the exact same D•F screw (12-24x11/4 T-5) was drilled three different times thru 3/8” thick steel under these same laboratory conditions. The first time the screw drilled in 18 seconds; the second time it drilled in 24 seconds and the third time it drilled in 38 seconds. Amazingly, the third time of 38 seconds was still 1.7 seconds faster than the 2nd best manufacturer’s time on their first installation! Not only will you “feel” how much quicker and easier D•F screws are to install, you will also “see” their superiority. During the above described test D•F screws always pro-duced some 1/4” to 1/2” long waste curls of steel which is, once again, the same result that the finest quality drill bits provide. The two competitive brands NEVER produced such a waste curl. The waste matter that they produced were tiny metal shavings similar to a grinding application, further proving that D•F brand screws cut quickly thru steel but the famous name brand competition rely on brute fric-tion. The simple conclusion is that D•F brand self-drillers are the best screws that money can buy.

*The unbiased laboratory conditions were established as follows: A 2500 RPM scru-gun was rigged in drill-press like fashion. A weighted fulcrum arm simulated 34 lbs. of pressure. A stop-watch and limit switch were part of the rig. The stop watch starts as soon as the scrugun is turned on. The stop watch stops as soon as the fastener fully penetrates the steel which triggers the limit switch. The exact same steel is slid over and drilled by the next screw to be tested. As you can tell, this test eliminates ANY human intervention.

STEEL LBS. OF AVG. DRILL TIMEPART THICKNESS FORCE D•F X Y

12-14 x 3/4 T-3 .112” 34 4.7 sec. 11.5 sec. Fail12-24 x 11/4 T-5 .375” 34 20.3 sec. Fail 39.7 sec.

D•F® WAFER HEAD SCREWSDue to the vast array of uses for this incredibly popular fastener, we have substan-

tially enhanced this product offering. These #2 phil wafer head screws are now avail-able in lengths of: 1/2”, 3/4”, 1”, 11/4”,15/8”, 2”, 21/2”, 3” and 4” in both sharp point and T-2 point. Lengths up to 2” are #8 dia. Lengths 21/2” and longer are #10 dia. The 21/2” and longer sharp points have a T-17 point. Zinc plated. (DW)

#8 DIA#10 DIA

® D•F® SCREWS


D•F® STAINLESS CAP HEADSUnique design incorporates a 300 series stainless cap mechani-cally formed around a high strength carbon steel fastener. Screw body has Dyna-Coat® 1,000 hour salt spray premium coating.

D•F® DECKING SCREWS

We provide the high-est quality and complete line of decking screws. Available in carbon steel with our premium Dyna-Coat® 1,000 hour salt spray. The coating has a slight green tint to prop-erly match a wood deck. Also available in 300 series stainless steel. All screws have a #2 square dr ive, Type-17 point. Deep coarse threads for excellent attaching of wood to wood. Unlike many of our competitors, our longer screws increase in screw diam-eter to properly match the increase of stress and pressure that the screw will be expected to endure.

We have started the slow transition from stocking square drive to torx drive screws. Up to 2” length will be #20 torx drive. 21/2” and longer will be #25 torx drive. Sizes available in both carbon steel with premium Dyna-Coat® and stainless. Choose #8x11/4”, #8x15/8”, #8x2”, #10x1 S/S only, #10x21/2”, #10x3”, #10x31/2”, or #10x4”.

TAPPING SCREWS#14 dia. Type-AB 5/16” S/S Hex. Choose1” or 11/2”.#17 dia. Type-AB 5/16” S/S Hex. Choose1” or 11/2”.

POLE BARN SCREWS#10 dia. Type-17 point 1/4” S/S HexHi-Lo. Choose 1”, 11/2”, 2” or 3”.#12x3/4” stitch or plug 1/4” Hex.#14x11/2” Type-17 point 5/16” S/S Hex.

T-1 STITCH SCREWS#14 dia. T-1 5/16” S/S Hex. Choose 7/8” or 11/8”. The 11/8” screw has a 1/4” unthread-ed lead-point.

T-3 METAL TO METAL SCREWS

#12 dia. T-3 5/16” S/S Hex. Choose 1”, 11/4”, 11/2”, 2”, 3”, 4” or 6”.

#14x11/4” T-3 5/16” S/S Hex.

T-5 SCREWS FOR STRUCTURAL STEEL

#12 dia. T-5 5/16” S/S Hex. Choose 11/2”, 2” or 3”.

D•F® ZINC CAST HEADZinc cast head of Zamak-5 zinc alloy long life fastener is offered in the following options:

POLE BARN SCREWS#9x11/2” 5/16” Zinc-Hex.#10 dia. T-17 5/16” Zinc-Hex. Choose1”, 11/2”, 2”, 21/2” or 3”.#14 dia. T-17 5/16” Zinc-Hex. Choose11/2” or 2”

T-1 STITCH SCREWS

#14x7/8” T-1 5/16” Zinc-Hex.

T-3 METAL TO METAL SCREWS

#12 dia. T-3 5/16” Zinc-Hex. Choose 1”, 11/4”, 11/2”, 2” or 3”.#14 dia. T-3 5/16” Zinc-Hex. Choose 11/4” or 11/2”.

T-5 SCREWS FOR STRUCTURAL STEEL

#12-24x11/4” T-5 5/16” Zinc-Hex.

SELF-TAPPING SCREWS#14 dia. Type-AB 5/16” Zinc-Hex. Choose 1” or 11/2”#17 dia. Type-AB 5/16” Zinc-Hex.Choose 1” or 11/2”

D•F® 410 STAINLESS STEELThe following 410 stainless steel screws are stocked and come standard with Dyna-Coat® 1,000 hour salt spray premium coating.

SCREWS FOR STRUCTURAL STEEL#12-24x1” 5/16” HWH T-4.

#12 dia. 5/16” HWH T-5. Choose 11/4”or 2”.

#8 DIA. T-2#8-18x1/2” 1/4” HWH T-2.#8-18x3/4” #2 phillip flat head T-2.#8 dia #2 phil wafer head T-2. Choose 3/4” or 11/4”.

#10 DIA. T-2#10x3/4” 5/16” HWH T-2.#10x3/4” #25 Torx Pan Head T-2.#10x3/4” #2 phillip undercut T-3 (see pg 83 box #10).#12 DIA. T-3 (WITH OR WITHOUT ASSEMBLED

9/16” O.D. S/S WASHER)#12 dia. 5/16” HWH T-3. Choose 3/4”, 1”, 11/4”, 11/2”, 2” or 3”.#12x11/4” 3/8” HWH T-3.#12x3/4” #25 Torx Pan Head T-3.

#14 DIA. T-3 (WITH OR WITHOUT ASSEMBLED 5/8” O.D. S/S WASHER)

#14x11/4” 5/16” HWH T-3.#14 dia. 3/8” HWH T-3. Choose 1”, 11/2”, 2”, 3”, 4”, 6” or 8”.

#14 DIA. T-1 STITCH SCREW

#14x7/8” 5/16” HWH T-1.#14x7/8” 3/8” HWH T-1.

T-3 STANDOFF FOR INSULATION#12x17/8” T-3 dual-thread 5/16” S/S Hex.Use when installing 3”-6” of blanket insu-lation. Large #17 dia neck helps to pre-vent over compression of the insulation.

D•F® LONG LIFE SCREWS

ORDER ON-LINE @ DYNAMICFASTENER.COM Dyna-Coat & D•F are registered trademarks of Dynamic Fastener Service, Inc.

D•F® BI-METAL SCREWS

There are applications for screws where a carbon steel point is required to avoid the dreaded “pre-drilling” but a completely 300 series stainless steel head is required. Bi-Metal screws are the answer to this fastener quandary. As the drawing to the left illus-trates, a solid shank and head of 300 series stainless is actually fused to carbon steel. Our D•F Bi-Metal screws come standard with our premium Dyna-Coat ® 1,000 hour salt spray coating. The current list of our line of Bi-Metal screws is below. The load-bearing length of a D•F bi-metal screw is limited to the point of the fusion. All of the carbon steel portion of the screw must be through the connection and not in the load-bearing portion of the connection. Please call us for the distance on any given screw.

HEADING MACHINE;CARBON STEEL

HEADING MACHINE;

FUSION WASHERREMOVAL

POINTING THREADING HEATTREATMENT

FINISH(COATING)

#10 DIA. T-2

#10 dia. 5/16” HWH T-2. Choose 3/4”, 1” or 11/2”

#10x3/4” #25 Torx Pan Head T-2

#12 DIA. T-3#12 dia. 5/16” HWH T-3. Choose 1”, 11/2” or 2”

#12 dia. #25 Torx Pan Head T-3. Choose 3/4” or 11/2”

#12 DIA. T-3

#12x11/2” #25 Torx Pancake Head (clip screw) T-3

#12 DIA. T-3 WITH WASHER

#12 dia. 5/16” HWH with 9/16” O.D. stainlesssealing washer. Choose 1”, 11/2” or 2”

#14 DIA. T-1

#14x7/8” T-1 5/16” HWH with 5/8” stainless sealing washer

#14 DIA. T-3 (WITH OR WITHOUT 5/8” O.D. STAINLESS SEALING WASHER)

#14-14 3/8” HWH T-3. Choose 1”, 11/4”, 11/2” or 2”

#14-20 3/8” HWH T-3. Choose 1” or 11/2”

FOR HEAVY METAL#12-24x3” T-4 #3 PFH with wings#12 dia. T-5 5/16” HWH. Choose 11/2” or 2”#14-20x4” T-5 3/8” HWH ®

There are only two types of selfdrilling screws that Dynamic Fastener recommends for drilling through or into aluminum. Both screw types are on this page: the all-300 stainless selfdrillers & bi-metal selfdrillers. Aluminum has very unique properties that result in a highly critical fastener selection process. Two of the more apparent properties of aluminum are: it gets very hot when drilling into it and the fact that it can expand & contract a significant distance. When coupling the many unique properties of aluminum with the high core hardness of a carbon steel screw or a 410 stainless steel screw, a potential for screw failure due to stress corrosion cracking can too easily be created due to the lack of ductility/high core hardness on the Rockwell scale. When mechanically fastening dissimilar metals, such as steel & aluminum, once water is added, either directly or through the atmo-sphere, then a galvanic reaction will occur. That reaction causes the formation of hydrogen. This hydrogen is a necessary element for the creation of hydrogen assisted stress cracking. This condition which results in screw failure, can occur in 410 S/S & carbon steel screws due to their high core hardness. But the screws on this page have a low core hardness which prevents hydrogen assisted cracking. Impacting drivers and impact wrenches produce too much torque to be used to install screws. A D•F #12 dia T-3 selfdriller requires a minimum 92 in-lbs. of torque to install. Yet, an impacting driver produces about 1,825 in-lbs. of torque. Do not use either of those tools to install painted &/or selfdrilling screws. Using a screwgun with a clutch is recommended in lieu of depth sensitive. We recommend the Dewalt DCF622, DW267, DW268 or DW269 for screw installation.

#8 x 3/4” T-2 #2 PFH. All-300 series stainless with Dyna-Coat®.

#10 x 3/4” T-3 #2 PFH with undercut all-300 series stainless with Dyna-Coat®.

#12 x 1” T-3 #25 torx drive truss head all-300 series stainless with Dyna-Coat®.

#14 x 1” T-3 #30 torx drive truss head all-300 series stainless with Dyna-Coat®.

#12 dia. T-3 #25 torx pancake head clip screw al l -300 ser ies stain-less with Dyna-Coat®. Choose 3/4” or 1”.

#12 dia. T-3 5/16” HWH. Al l -300 series stain-less with Dyna-Coat®. Choose 1” or 11/2”.

#12 dia. T-3 5/16” HWH. 9/16” O.D. stainless seal-ing washer. All-300 series s ta in less wi th Dyna-Coat®. Choose 1” or 11/2”.

#14 dia. T-3 3/8” HWH. Choose with or without 5/8” O.D. stain-less sealing washer. All-300 series stainless with Dyna-Coat®. Choose 1” or 11/2”.

SELFDRILLING SCREWS FOR ALUMINUM

D3 headmark = Bi-metal screw

#12-11x1” T-4 #25 torx pancake head clip screw all-300 series stainless with Dyna-Coat®.

3D headmark = all 300 series stainless selfdriller

CALL 800-821-5448 OR FAX 800-844-1199 DYNA-COAT, D•F & FENDERHEAD are registered trademarks of Dynamic Fastener Service, Inc.

D•F®

STOUT T-5s are the stout T-5 with a built in fender washer like washer face under the head. These extra large T-5s pro-vide many advantages over their puny brethren. 1) The screw shank is a #14 diameter vs. the common #12 diameter. The larger #14 diameter will provide better pull-out and shear values than the #12 diameter screws. 2) The giant washer face measures 5/8” O.D. It provides superior pull-over values and creates more than 100% addi-tional bearing area as compared to the common 7/16” O.D.

washer face. (.3066 sq.-in. vs. .1502 sq.-in.). 3) can self-drill thru 5/8” thick steel vs a 1/2” capacity for #12 diameter T-5s. 4) The extra stout head of these fasteners measures a whopping 37% taller than their puny #12 brethren. This extra stout-ness of the head height a l lows the screwgun’s torque to be more efficient-ly transferred to the screw’s drill tip. It also ELIMINATES

the wobble that is frequently experienced when one is starting the drilling process. Usually the operator experiences an increasing amount of wobble (and frustration!) when using longer screws. But that problem is history. 5) Milled thread reliefs insure that the threads will tap quickly and reliably – every time. 6) Milled notched tap relief positioned at end of drill flute sub-stantially reduces the spike in torque that is created as threads first start to tap. This feature will 1) reduce the torque spike that is felt in the user’s wrist and 2) reduce screw snapage associated with the torque spike. (Milled notched tap relief is a new feature. It is current-ly provided on most, but not all T-4’s and T-5’s in #12 or #14 diame-ters). These stout T-5’s do not wobble as one starts drilling them. In fact, these screws are installed with one hand on the screw-gun. Period. The second hand does not need to be holding the shank of the screw steady. This one hand operation is true for all Fenderheads, including the longest. Due to the 5/8” washer face, some contractors have used this screw for decking in lieu of burning 5/8” puddle welds. This eliminates the aggravation of testing weld quality and eliminates the hassle of repairing weld burn throughs. All Fenderheads are coated with Dyna-Coat ® which is a 1,000 hour salt spray premium coating. Fenderheads are available in lengths of 11/2”, 21/4”, 3”, 4”, 5”, 6”, 8” and 10”. 4” and under are fully threaded. Stocked with a metal backed EPDM washer and without the EPDM washer.IMPORTANT INSTALLATION INSTRUCTIONS: 1) When drilling through 1/4” or thicker steel it is very important to use a slow rpm/high torque screwgun. A DeWalt 269 with 1,000 rpm’s is a perfect example of a suitable tool. See page 4 for more

info on the DW269. If you use the very common 2,500 rpm screw gun (DW268) or 2,000 rpm screwgun (DW267) to drill into 1/4” or thicker steel then you will prematurely burn up the motor in the screwgun. Plus, you will burn up the points of your screws at an unacceptably high rate. Everyone knows that there is a direct trade-off between high speed and high torque. When drilling thick steel, high torque is what you need! 2) Installation pressure must be light. 30-40 lbs. of force is all that need be applied to these ultra-premium screws. Just like the finest quality drill bits, these superior screws work best when one allows the screw to do the drilling and the work. With a 1,000 rpm screwgun and the proper force of 30-40 lbs. of pressure, your screw failure rate will be less than 1%. When drilling 1/4” or thicker steel, the synergistic benefits of coupling these premium T-5’s and a 1,000 rpm screwgun are many: 1) less fastener waste 2) easier fastener installation 3) worker productivity increases since the down time is eliminat-ed in which the worker waits for the tool to be cool enough to pickup 4) worker satisfaction improves by providing the right tool for the right job 5) the unnecessary costs associated with premature motor burn up is eliminated 6) you WILL spit out 1”+ waste curls of steel. This fact reinforces to the operator that this is a highly efficient drilling process 7) particularly difficult applications such as drilling through dead-air trapped between two pieces of steel are greatly simplified. In numerous tests not once did the point chip, split or burn off in this difficult applica-tion. Amazingly, these stout T-5’s were installed using a DW269 through 3/8” thick steel into another piece of 3/8” thick steel with 1/8” of space between the two plates of 3/8” steel. Our competi-tor’s screw could not perform this very difficult application. If you currently do not own any DW269s — we are not sug-gesting that you need to buy more screwguns. On the contrary, instead of company X buying say 30 DW268’s each year, we are suggesting that company X should buy 20 DW268’s and five DW269’s. By buying the right tool for the job, your annual screwgun purchases will decrease not increase. The DW269 can drill any point — from T-1 to T-5. But for the very most common drilling applications of 1/8” and lighter steel, the DW269 is not as efficient as the DW267 or DW268. Some customers tell us that they use a 1/2” impact wrench to install T-5’s. Although not recommended, an impact wrench will quickly install a T-5. But the user must be cautioned to not over torque the screw. An impact wrench can easily shear off the head of the screw during installation. An over torqued screw head could create excessive stress on the screw. This stress can fatigue the fastener over time resulting in potential fastener failure after installation.

ENGINEERING DATA (Pounds)

PULL-OUT VALUES SHEAR

Steel Gauge 1/4” 3/8” 1/2”

Ultimate Value 5528 5593 6244 3651All tests were conducted under laboratory conditions. Ultimate values are listed. The user or specifier must determine and apply appropriate safety factors. Unless otherwise provided, a 4-to-1 safety factor is commonly used. Because actual applications vary and are uncontrollable by Dynamic Fastener, we assume no liability for the use of this data.

D.F

D.F

D.F

D.F

D.F

D.F

Actual size photo comparing 12-24 x 11/2” T-5 vs

14-20 x 11/2” Fenderhead.

®

D.F

D.F

#14 DIA STOUT T-5 WITH 5/8” DRILL CAPACITYD•F®

ORDER ON-LINE @ DYNAMICFASTENER.COM HARDY-HEX™ is a trademark of Dynamic Fastener Service Inc.

DRIL-FLEX® STRUCTURALSELF-DRILLING FASTENERS

Dril-Flex fasteners utilize the Flex Technology® dual hardening process to ensure optimum ductility and hardness. Tested in accordance with ASTM standards, Dril-Flex fasteners provide the same resistance to hydrogen-assisted cracking as a Grade 5 fastener. Available lengths 3/4”-4”.

Meets SAE J429 Grade 5 and ASTM A449 strength and duc-tility standards.Approvals: ICC ES ER-4780 Legacy Report; COLA (City of Los Angeles).PULL-OUT TESTS – STEEL PULL OUT VALUES SHOWN ARE IN LBS.SCREW POINT DRILL STEELSIZE TYPE CAP. 18 16 14 12 1/8 3/16 1/4 5/16

10-16 3 .150 396 501 634 1595 169312-14 3 .187 396 527 710 1678 2061 2898 1/4-14 3 .187 398 530 686 1950 2264 39191/

4-20 4 .312 516 649 1912 2296 2928 3561 44885/16-24 4 .312 2148 2573 4226 5424 6622

SHEAR TESTS – STEEL PULLOUT VALUES SHOWN ARE IN LBS. STEELSCREW POINT DRILL 18-18 18-14 16-16 14-14 1/8”- 3/16”- 1/4”-SIZE TYPE CAP. gauge gauge gauge gauge 3/16” 1/4” 12 gauge10-16 3 .150 1362 1733 146212-14 3 .187 1315 2118 1655 18161/4-14 3 .187 1395 2313 1681 2417 26001/4-20 4 .312 1350 2086 1582 2450 2814 2810 27065/16-24 4 .312 5486 5283 4761

TIP-PROPROTECTIVE

CAPS Tip-Pro Protective Caps are used to increase safety or to enhance aesthet-ics. Push the pliable vinyl cap over the top of the protruding screw to elinimate the exposure of the sharp metal screw point. Order the same diameter Tip-Pro as the screw that you are covering. Howev-er, a 14x7/8 T-1 screw requires a #12 dia. Tip-Pro. Must purchase in full bag qty of 1,000 per bag.

SCREW DIA. TIP-PRO QTY/ PRICE/TO CAP LENGTH COLOR BAG BAG

#12 3/4” or 1” White or Gray 1,000 $ 99.00#14 3/4” or 1” White or Gray 1,000 99.0011/32” (Butler 1” Black 1,000 190.00Scrubolt)

3/4” TIP-PRO WHITE #14 DIA.

If you are tired of dealing with the aggravation of using those puny headed HVAC screws then step-up to our D•F brand HVAC screw. Instead of having a head that practically looks like a hex sided nail, our D•F brand have an ultra stout head which is SUBSTANTIALLY taller than the inferior competition. Our stout head creates a more than 100% additional engagement of the screw head into the socket which drastically reduces the occurences of the tool “slipping off” during installation. D•F HVAC screws have a serrated washer face and unique thread design which practically eliminates screw strip-out! Your wrist will feel a slight torque when the screw is fully set. These D•F screws get set so tight that the metal will actually dimple at the fastener connection. The same dimple effect as if the metal were spot welded. Specially engineered threads and a super sharp point result in a super-quick drilling installation time of about one second. HVAC screws are available in: #8 or #10 diameter • 1/2” to 2” lengths • HWH slotted or HWH unslotted • 1/4” or 5/16” head • optional 1/2” O.D. metal backed, rub-ber sealing washer. Also stock the 8x1/2” in 410 stainless. HARDY-HEX™ have an incredible .229” tall head. Especially helpful when an overkill of the hex head material is desired in the socket for engagement driving purposes. 5/16” HWH slotted. Choose 10 x 3/4” or 10 x 11/2”.

D•F HVAC SCREWS

LOOK and COMPARE!

Brand“X”

D•FBrand

SERRATED WASHER FACE AVOIDS STRIPOUT

ULTRA-STOUT HEAD REDUCES SOCKET SLIP-OFF

DEEP THREADS PROVIDE BETTER PULLOUT VALUES

SUPER-SHARP POINTMAKESDRILLING FASTER

.182” .090”

10 x 3/4”

.229”

D•FHARDY-HEX™

This exceptionally sharp pointed screw will self-pierce up to 18 gauge steel (.048”). Since it self-pierces instead of drilling, metal shavings are practi-cally eliminated. Dual-threads: The fine threads near the point facilitate the extra quick time to fasten and the coarser threads under the head create a proper bite into the metal.

Other features include an extra stout head for positive socket engagement and serrated washer face to resist strip-out.

Choose 5/16” HWH or #2 phillips wafer head.

The geometrical combination of the special point, threads, & stout head allow this screw to be driven at angles. (AC)

HVAC SCREWS, , DRIL-FLEX

Fasten • Metal Roofing Fasten • Metal Roofing • Steel Framing • Decking • Steel Framing • Decking • Subflooring • Tile Roofing • Subflooring • Tile Roofing • Fiber Cement Board • Fiber Cement Board • Drywall and more with labor • Drywall and more with labor saving speed and no wasted saving speed and no wasted fasteners.fasteners.

CALL 800-821-5448 OR FAX 800-844-1199

TESTERS, EXPLOSION VENTING & BRACING

CABLE BRACING Cable bracing is attached to the structural steel in an “X” pattern in the walls and roof. The purpose is to decrease the building’s lateral/horizontal movement to enhance the building’s wind resistance to failure. Cable brace kits are stocked in: 1/4”, 5/16”, 3/8” and 1/2” dia. The following hard-ware is included: two zinc eyebolts, two zinc nuts, two zinc flat washers, two plain hillside washers, two deadend grips. Cable brace kits are sold unassembled and do not include the wire cable. Kits can be ordered pre-assembled with an additional charge. Wire for cable bracing is cut to length per order and consequently is not eligible for material return for credit. (WC)

SAG STRAP Sag strap is screwed to the purlins and girts to help keep them from rolling or sagging. Sag strap can also be used to increase the windloads and snow loads of a building by tying the purlins and girts together. 26 gauge metal. 250’/roll. Please call for width, color and pricing as stock may change which affects those three variables. (WC)

CABLE BRACING

SAG STRAP

GENERAL INSTALLATIONPROCEDURES

RELEASECONDITIONINTERIOR

EXPLOSION

“Explosion Venting” or “Pressure Release” fasteners are highly

engineered fasteners that are typically specified and used in which the immediate area contains highly volatile liquids, fumes, powders…hence an explosion is an ever-present danger. Since the potential of an explosion can’t always be eliminated, these fasteners–when properly installed–will help minimize the loss of life and destruction of the building.

EXPLOSIONVENTING

FASTENERS

PULL-OUT TESTERS Make sure you meet architectural requirements with an easy to use pull-out tester. We offer 2 options to fit any need. The RS1000 pull tests up to 1,000 lbs. For use on steel fas-teners including screws, toggle bolts, threaded and drive-in concrete fasteners or plastic tectum and gypsum fasteners. Use in all types of substrates. It comes with a 21/2” diameter analog dial with maximum reading pointer.

The RS2000 pull tests up to 2,000 lbs. and features a large analog dial. It includes separate lifting feet for roof screws (1/4” shank - 5/8” head), rawl type fasteners (7/16” shank - 1” head) and NTB type fasteners (15/32” shank - 2” head).

RS1000 with case $675 RS2000 with case $1,210

SEALTESTER Designed specifically for the metal building industry to check fastener seals on both old and new installations. The SealTester is designed to detect leaks around fasten-ers by testing from the top side of the roof. Easy to use — just place the unit over the fastener, pull the top handle & read the vacuum gauge — If the gauge’s needle holds steady then you have a good seal. Simple!

SD SealTester $427/ea.

RS1000 RS2000


LEVER HAND TOOLRV-200A two handed, manual, lever-action rivet tool. It can pull the 9/32” Bulb-tite rivet (most commonly used in Butler Buildings) or any rivet up to 1/4” diameter in any material. This tool requires a pulling head. Order separately. Pulling heads are shown in the box to the left.

Specifications: .394” stroke, 231/4” long, 4.0 lbs. tool wt.

Price $338

PULLING HEADS

Olympic tools require different pulling heads to pull differ-ent diameter rivets.

PART# SPECIFY DIA OF RIVET PRICE

RV8840B-X 3/16”, 1/4” or 9/32” $219

THE VERY POPULAR RV74G

Tool was discontinued in January 2017. We have a handful available in our rental fleet, but not any for sale.

PART # RENTAL RATE

RV74G Pistol Grip $85/weekPulling Head $25/week

LEVER HAND TOOL RV-BTA two handed, manual, lever-action rivet tool. This tool is modified with special jaws and 4 nosepieces designed to set all diameters of Bulb-tite rivets without using a pulling head.

Specifications: .394” stroke, 223/4” long, 4.1 lbs. tool wt.

Price $311

POWERBIRD® PRO 3300 If you have the proper nosepiece then the PowerBird Pro 18V tool will pull any standard rivet or Olympic Bulb-tite rivets with its 3300 lbs. of pulling force. NO additional adapter or pulling head is required to pull the Bulb-tite rivets. Minor adjustments must be made to the tool before you can pull 1/8” standard rivets. Includes 18V 2.1 A-H battery, charger, 4 nosepieces. WARNING! When changing a nosepiece, it is CRITICAL and MANDATORY that you first “pull and hold” the trigger, with a charged battery inserted in the tool. Then change nosepiece. Release trigger ONLY AFTER the new nosepiece is fully attached to the tool.

ITEM DESCRIPTION PRICE

PowerBird Pro 3300 18V cordless blind rivet tool $1,585Nosepieces For Bulb-tites 67Nosepieces For Standard Rivets 14

NOTE: Above values are shown as a guide only and may vary depending upon the application. Shear and tensile strength tests were conducted in hardened alloy steel sheets with a thickness equal to the fastener diameter.

Rivet Olympic NOMINAL Identification Configuration Number DIAMETER

Rivet Nominal Nominal Nominal Shear Tensile Clamp-Up Body Drill # & Body Head Head (Typical) (Typical) (Typical) Dia. Hole Size Grip Range Length Dia. Height (Lbs.) (Lbs.) (Lbs.)

RIVETS

RV6604-6-36-46-66-8

RV6604-8-48-68-8

RV6605-9-6 9-10

RV6606-8-48-68-8

RV6603-9-69-10

RV6604 SeriesStandard Dome HeadAluminum RivetAluminum Mandrel

RV6605 SeriesLarge Flange HeadAluminum RivetAluminum Mandrel

RV6606 SeriesLow Profile Dome HeadAluminum RivetAluminum Mandrel

RV6603 SeriesDome HeadAluminum RivetAluminum Mandrel

3/16”

1/4”

9/32”

1/4”

9/32”

.205 #4 .020-.187 .687 .443 .088 740 460 130 (.209-.221) .062-.250 .750 .443 .088 .187-.375 .875 .443 .088 .312-.500 1.000 .443 .088

.246 1/4 .062-.250 .795 .560 .113 1100 675 250 (.250-.263) .125-.375 .920 .560 .113 .250-.500 1.045 .560 .113

.304 5/16 .042-.375 1.090 .743 .145 1500 1100 375 (.308-.327) .250-.625 1.340 .743 .145

.246 1/4 .040-.250 .795 .543 .111 1100 675 250 (.250-.263) .125-.375 .920 .543 .111 .250-.500 1.045 .543 .111

.304 5/16 .042-.375 1.090 .615 .145 1500 1100 375 (.308-.327) .250-.625 1.340 .615 .145

CALL 800-821-5448 OR FAX 800-844-1199

REC DOME ACTUAL BODY DRILL HEAD GRIP RANGE BODYDIA. BIT DIA. OF MTRL LENGTH AA AF CB FF® NF NN®

.031 - .062 .188 AA41 AF41 FF41 NF41 NN41 .031 - .125 .250 AA42 AF42 CB42 FF42 NF42 NN42 .062 - .187 .313 AA43 AF43 CB43 FF43 NF43 NN43

1/8” #30 .250” .125 - .250 .375 AA44 AF44 CB44 FF44 NF44 NN44 .187 - .312 .438 AA45 AF45 FF45 NF45 NN45 .250 - .375 .500 AA46 AF46 FF46 NF46 NN46 .375 - .500 .625 AA48 AF48 FF48 NF48 NN48 .500 - .625 .750 AA410 AF410 FF410 NF410 NN410

.031 - .125 .275 AA52 AF52 FF52 NF52 NN52 .062 - .187 .338 AA53 AF53 FF53 NF53 NN535/32” #20 .312” .125 - .250 .400 AA54 AF54 FF54 NF54 NN54 .250 - .375 .525 AA56 AF56 FF56 NF56 NN56 .375 - .500 .650 AA58 AF58 FF58 NF58 NN58

.031 - .125 .300 AA62 AF62 FF62 NF62 NN62 .062 - .187 .362 AA63 AF63 FF63 NF63 NN63 .125 - .250 .425 AA64 AF64 FF64 NF64 NN64 .250 - .375 .550 AA66 AF66 FF66 NF66 NN66

3/16” #11 .375” .375 - .500 .675 AA68 AF68 FF68 NF68 NN68 .500 - .625 .800 AA610 AF610 FF610 NF610 NN610 .625 - .750 .925 AA612 AF612 FF612 NF612 NN612 .750 - .875 1.050 AA614 AF614 FF614 NF614 NN614 .875 - 1.00 1.175 AA616 AF616 FF616 NF616 NN616

.125 - .250 .475 AA84 AF84 FF84 NF84 NN84

1/4” F .500” .250 - .375 .600 AA86 AF86 FF86 NF86 NN86 .375 - .500 .725 AA88 AF88 FF88 NF88 NN88 .500 - .625 .850 AA810 AF810 FF810 NN810 NN810

Our rivet P/N explanation is as follows:First letter is the material of the rivet body: A = Aluminum, C = Copper, F = (Ferrous) Steel, N = (Non-ferrous) Stainless steel.Second letter is the material of the mandrel: A = Aluminum, B = Brass, F = (Ferrous) Steel, N = (Non-ferrous) Stainless steel.If it is a standard dome head rivet then there are no more letters. Otherwise, CS = 120° countersunk head, CE = Closed end, LF = Large flange, MG = Multi-gripThen, the first number is the rivet diameter. As an industry standard, simply take this # and divide by 32 to determine body diameter. The second number is the max grip range. Also as an industry standard, take this # and divide by 16 to determine the maximum grip. 1/8” is the “range of grip” for a standard D•F Rivet.

When one is working with copper, a copper rivet with a copper mandrel would, theoretically, be desired. But a copper mandrel is not practical because the material is too soft to be able to “upset” (or bucked/deformed) & collapse the rivet tightly. The closest, highest quality option is a copper rivet with a brass mandrel. Unfortunately for the contractor, the other common answer is a copper rivet with a copper plated steel mandrel. Although these rivets look beautiful in the box and they are substantially cheaper to buy and make - WARNING: once the copper plated steel mandrel is pulled, then the result is an unprotected broken steel mandrel in the center of a copper rivet which will display the ugly shimmer of cold steel against your otherwise beautiful (& expensive!) copper mastery. Plus, one should expect the almost instantaneous rust streaks that an uncoated, severed steel fastener would routinely display. When buying copper rivets, always insist on brass mandrels.

AA = 5052 Aluminum Body/Aluminum Mandrel, IFI-114 Grade 11, RoHS compliant.AF = 5056 Aluminum Body/Steel Mandrel, IFI-114 Grade 19, RoHS compliant.CB = 110 Copper Body/Brass Mandrel, IFI-114 Grade 20, RoHS compliant.FF® = 1006 Steel Body/Steel Mandrel, IFI-114 Grade 30, RoHS compliant.NF = 304 Stainless Steel Body/Steel Mandrel, IFI-114 Grade 50, RoHS compliant.NN® = 304 Stainless Steel Body/Stainless Steel Mandrel, IFI-114 Grade 51, RoHS compliant.In addition to standard dome head rivets, we also stock: Countersunk, large flange, closed-end & multi-grip. Our open-end rivets are made per IFI-114 spec’s & our closed-end rivets are made per IFI-126 spec’s.

Give us a call... you can ask for Rosie, I’m your D•F rivet boss!

TM

R VET BOSS®

The iconic image of Rosie the Riveter is a trademark of Dynamic Fastener Services Inc.

D•F® RIVET SPECIFICATIONSTM

Rivet Boss, FF & NN are registered trademarks of Dynamic Fastener Services Inc.

B.L.


RIVET TOOLHand rivet tool will pull rivets up to 3/16” diame-ter in all materials.

MODEL # 1-5 PRICE 6+ PRICE

HP-2 $32.55 $29.30

D•F® RIVETS RIVET BOSS™

D•F Rivets are now available in the most requested color . . . . INVISIBLEThe above photo illustrates our actual stock of JUST the size 43 all stainless rivet. We stock the 43 ALL S/S rivet in plain and

these 66 different colors pictured above, in convenient bags of 250 pieces – all for the same day shipping.

With stock levels on rivets of over 75 MILLION pieces, of which over 55 MILLION are prepainted, we can handle your rivet needs. Our rivets are almost exclusively stocked in bags of 250 pieces – for your ease of ordering and your efficient disbursing to your crews.

D•F prepainted rivets never have any paint on the mandrels to gum-up the jaws of your rivet tool. Also, there is never a “paint set-up charge” when purchasing prepainted rivets. Our goal is to typically have in stock the rivet that you need, already painted, to precisely match your panel supplier’s standard colors. However, please be aware that when matching paint colors for relatively small lot sizes, there will always be a certain degree of inconsistencies – thus, there must always be a few color-shades of tolerance.

12V Rivet Tool KitNo. 2550-22FREE 3rd battery, a 12V 3.0 A-H (2402) - $62 value.

With 2,000 lbs. of pulling force, this rivet tool can pull up to 3/16” stainless rivets. Once the mandrel is inserted into the tool, the tool will “hold” the rivet in any posi-tion - hands free. “Spent mandrel collector” on rear of tool.

Standard equipment: Two 12V 1.5 A-H batteries (48-11-2401), charger (48-59-2401), 4 silicone nose pieces: 3/32”, 1/8”, 5/32”, 3/16” & carrying case.


TM

BATTERYRIVET TOOL

The Accubird can pull 1/8” to 3/16” standard rivets. The Pow-erbird can pull 3/16” to 1/4” stan-dard rivets (but NOT 1/8” rivets). Spent mandrels get collected in back of tool. The Accubird has 2,248 lbs. pulling force, .79” stroke & pulls 1,100 all steel rivets on a charge with the enclosed 1.3 A-H battery. The Powerbird has 3,147 lbs. pulling force, .79” stroke and comes with one 2.6 A-H battery.

Accubird 14.4V Rivet Tool Kit ......................... $981

Powerbird 14.4V Rivet Tool Kit .................... $1,140

CALL 800-821-5448 OR FAX 800-844-1199

FAB-LOKFAB-LOK Vibration, either from inside or outside of a building, can make ordinary fasteners loosen and back out. Fab-Lok fasteners combine a slotted aluminum sleeve, EPDM washer and threaded fastener to provide high resistance to vibration loosening. Excellent for use with insulated panels.

TYPICAL APPLICATIONS Metal panels to structural steel on buildings where heavy internal movement occurs from operating machinery or excessive external movement occurs from high winds, jet engines,... Metal panels to structural steel on buildings subjected to high level of expan-sion/contraction. Blind hole applications, such as attaching insulated panels. Repairing sepa-rated metal panels and acidic environments such as hog confinements. NOTE: product not intended for structurally loaded joints. Slotted aluminum sleeve assembled to your choice of carbon steel or 300 series stainless steel screw. Choose 1 of 3 grip ranges: .062-.250”, .250-.500” or .500-.750”. *DYNA-LOK designed to fit DeWalt® DCF622M2, DC668KA, DW267, DW268 and DW269. Max 1000 RPM during installation.

FAS-10-4 FAB-LOK w/carbon screw (grip 1/16” to 1/4”) .................. $953.70/m*A Full Box of 1m pcs.* Quantity Pricing Available

DW268

Pull-Out (lbs.) Single Sheet Pull-Out (lbs.) Double Sheet STEEL PULL-OUT FAILURE MODE MATERIAL PULL-OUT FAILURE MODE

26 Ga. 612 Sheet Split 26 Ga. Steel 816 Sheet Split 24 Ga. 776 Sheet Split 20 Ga. Steel 1084 Fastener Broke 20 Ga. 888 Sheet Split 18 Ga. 934 Sheet Split .032” Alum 833 Fastener Broke 16 Ga. 1011 Fastener Broke 14 Ga. 1069 Fastener Broke

Ultimate Shear (lbs.) CARBON SCREW STAINLESS SCREW

2159 1950

DYNA-LOK*

BOXBOLT®

BoxBolts provide a fully tested and approved* blind connection solution. Suitable for use with rectangular, square and even circular hollow sections. Simple to install using a stan-dard wrench and torque wrench. Available in zinc plated, hot dip galvanized and stainless steel to suit your needs. Listed below is the technical data on just a few popular sizes.

*Above loads have a partial reduction factor of 0.75 applied to the ultimate tensile and shear strength to give the available strength. The physical testing in hollow structural section was verified by Lloyds Register Type Approval. It is also tested and approved by DIBt (Deutsches Institut fur Bautechnik) which complies with the DIN 18800 and Eurocode 3 design methods for bolted steel connections.

BOLT SET SCREW CLAMPING RANGE SLEEVE HOLE SIZE AVALABLE STRENGTH TORQUEPART # DIA. LENGTH MIN MAX DIA. DIA. TENSILE LB. SHEAR LB. (FT.LB.)

BQ1Z08 5/16” 2” 3/16” 1” 1/2” 9/16” 5071 5917 18BQ1Z10 3/8” 2” 3/16” 7/8” 11/16” 3/4” 9718 10985 33BQ1Z12 1/2” 23/16” 3/16” 1” 3/4” 13/16” 13015 12676 59BQ1Z16 5/8” 3” 3/16” 13/8” 1” 11/16” 26199 29578 140BQ1Z20 3/4” 4” 5/16” 15/8” 11/4” 15/16” 36932 33804 2211/2” x 23/16” zinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.60 ea

BOLTSFlat head (grade 2), finished hex (A-307) and heavy hex structural (A-325) bolts are stocked from 1/2-13 to 11/4-7 diameter and in lengths from 3/4” to 8”. Available finishes include plain, zinc and hot dipped galvanized. Currently, these bolts mainly ship from our Houston warehouse. (BZ)

Bin Bolts with a washer are stocked in the Kansas City warehouse. 5/16 x 3/4, 1” in grade 8.2 and 3/8 x 1”, 11/4” in grade 5. (MB)

FAB-LOK, BOXBOLT, BOLTS


SEALING WASHERS Metal backed sealing washers are pri-marily used to prevent leakage on assem-bled fasteners. They also act as a cush-ionary, non-abrasive agent against assem-bled parts. They may also be used to dampen vibration or simply act to provide bearing area. The metal is available in galvanized steel, stainless steel, and aluminum. Most have an EPDM rubber. A limited number have neoprene rubber. The washers’ outside diameter and inside diameter have many different vari-ations and combinations. The O.D.’s range from 3/8” to 11/2”. The I.D.’s range from one to fit on a #6 diameter screw to one to fit on a 1” dia. bolt.

DYNAFIND HOLE FINDER The Original Dynafind 1000 was designed by Butler Builder® associates to locate and drill mark the wall and roof panels for precise alignment to factory punched structurals on Butlerib® panels. The Dynafind 6000 will completely span the panel of Butler’s Shadowall™ wall system. The Dynafind 6000 is 12” longer and has one more center pin as compared to the 1000. The Dynafind 9600 was designed to be used on Butler’s CMR-24 roof system. It has five pins on 2’ centers. Unlike the other Dynafinds which have one fixed end pin at each end of the bar, the Dynafind 9600 starts with two end pins to help steady and center this 8’ beast. A spring loaded center punch goes in each of the last three holes. Dynafinds are used from the buildings exterior so as to eliminate the outwardly pointing dimple mark on the panel. This undesirable type of dimple will cut away the rubber seal under the fastener head, causing potential leaks.Dynafind 1000 Complete 51” Long ........................................................................... $104.00Dynafind 6000 Complete 63” Long ........................................................................... $123.00Dynafind 9600 Complete 99” long ............................................................................ $245.00End Pin Assembly (P/N 1002) ............................................................................................ $13.00Center Punch Assembly (P/N 1003) .................................................................................. $17.00

Butler Builder® and Butlerib® are registered trademarks of Butler Manufacturing. Shadowall™ is a trademark of Butler Manufacturing.

HEAD LENGTHDIA. STYLE MATERIAL 7/8” 1” 11/4” 11/2” 2” 21/4” 23/4” 31/2” 6”11/32” HWH Steel • •23/64” HWH Steel • • • • • • •11/32” Torx Pan Steel • • •11/32” HWH 410 Stainless • •23/64” HWH 410 Stainless •

Scrubolt™ Fasteners Scrubolt™ fasteners are a large self-tapping fas-tener developed for attaching standing seam roofing panel clips to pre-punched or pre-drilled framing members. Scrubolt™ nuts are stocked for both 11/32” and 23/64”.

STOCK SIZES

11/32” Scrubolt 23/64” ScruboltMaterial Thickness Drill Size Material Thickness Drill Size

.010-.060 19/64” .010-.120 5/16”

.060-.130 5/16” .120-.250 Ltr. “Q” (.322)

.130-.250 21/64” .250-.500 11/32”

.250-.500 Ltr. “Q” (.322)

Scrubolt is a registered trademark of Butler Manufacturing

IN-HOUSE PAINTING Our high quality, profession-al In-House painting operation enables us to custom match and paint most any screw or rivet with a short lead time. Typical lead time is just one or two days (days NOT weeks). Depending on the circumstances, we can paint and ship the same day that your order is received. We use $75/gallon polyurethane paint and then oven bake. Our painting system coupled with Jonathan, Bug, Eric, Andy, Jesse, Will, Miguel, James, and Austin, our meticulous painters, ensure your total satisfaction.

Center Punch End Pin

#1000

#6000

SEALING WASHERS, HOLE FINDER, SCRUBOLTS & IN-HOUSE PAINTING

CALL 800-821-5448 OR FAX 800-844-1199

CONVENTIONAL ANCHOR BOLTS A complete line of conventional Anchor bolts is in stock for same day shipment. “L” style anchor bolts are in stock from 3/8 x 6” to 11/2 x 36”. Typically, our anchor bolts are manufactured of A-36 steel. (A-36 steel is slightly stronger than A-307 steel.) Special materials, such as stainless steel and special platings, such as Zinc, are readily available. Special bolt dimensions that we do not inventory can be manufactured to your specifications. Typical lead time on specials is 2-10 days. Machine bolts, lag screws and all other standard fasteners are available with little if any lead time.

REPRESENTATIVE PRICING Description Price3/4 x 15” “L” style anchor bolt with nut and washer ............................................$ 3.45/E3/4 x 15” “Hex Head” anchor bolt with nut and washer .........................................5.60/E1 x 21” “L” style anchor bolt with nut and washer ................................................9.05/E1 x 24” “Hex Head” anchor bolt with nut and washer ........................................11.60/E11/4 x 36” “L” style anchor bolt with nut and washer ...........................................22.85/E11/2 x 24” “L” style anchor bolt with nut and washer ...........................................22.75/E

3/8 x 21/4” Power-Stud+™SD1 ........................................................................................................................................ $ 34.15/C*1/2 x 23/4” Power-Stud+™SD1 ........................................................................................................................................... 57.80/C*1/2 x 33/4” Power-Stud+™SD1 ........................................................................................................................................... 67.90/C*3/8 x 33/4” Power-Stud+™304 Stainless Steel ................................................................................................................. 210.00/C*

*Quantity Pricing Available

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent perfor-mance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over steel deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.

Ultimate Load Capacities for Power-Stud+™SD1 in Normal-Weight Concrete1,2

HEX RETHREAD DIE SETS IN WOODEN CASEP/N DESCRIPTION PRICE

DBD10PC 10 pc. UNC 1/4” to 1” $161

PLAIN FINISH PRICE/EA. 1/2” $1.95 5/8” 2.12 3/4” 2.63 7/8” 3.67

1/4 / (6.4)

3/8 / (9.5)

1/2 / (12.7)

5/8 / (15.9)

3/4 / (19.1)

1 / (25.4)

Minimum Embed. Depthhy

in (mm)

Anchor Diameterd

in. (mm)

4,000 PSI (27.6 MPa) Tension lbs. (kN) Shear lbs. (kN)

1/8 / (28) 1,660 / (7.4) 1,255 / (5.6) 13/4 / (25.4) 2,775 / (12.4) 1,255 / (5.6) 15/8 / (48) 3,100 / (13.8) 2,540 / (11.3) 23/8 / (60) 4,410 / (19.6) 2,540 / (11.3) 21/4 / (57) 4,800 / (21.4) 4,195 / (18.7) 21/2 / (64) 4,950 / (22) 4,195 / (18.7) 33/4 / (95) 10,065 / (44.8) 4,195 / (18.7) 23/4 / (70) 6,285 / (28) 6,815 / (30.3) 33/8 / (86) 8,380 / (37.3) 6,815 / (30.3) 45/8 / (117) 14,245 / (63.4) 6,815 / (30.3) 33/8 / (86) 9,075 / (40.5) 12,685 / (56.4) 4 / (102) 12,060 / (53.6) 12,685 / (56.4) 41/2 / (114) 20,915 / (93.4) 21,155 / (94.1) 51/2 / (140) 20,915 / (93.4) 21,155 / (94.1)

1. The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4.0 or greater to determine allowable working loads. Consideration of safety factors of 10 or higher may be necessary depending on the application, such as life safety or overhead.

2. The tabulated load values are applicable to single anchors installed in uncracked concrete at critical edge distance.

• Structural connections, i.e., beam and column anchorage• Safety-related attachments• Interior application/low level corrosion environment• Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers• Seismic and wind loading

HILLSIDEWASHERS

POWER-STUD+™ SD1(Wedge Anchor)

L ANCHOR BOLTS, & ANCHORS


CONCRETE SCREWS, POWER-BOLT & SCREW-BOLT

POWER-BOLT®

The Power-Bolt (previously known as Rawl-Bolt) is a single-unit, vibration-re-sistant, removable anchor bolt assem-bly with a finished hex or flat head design. Since the anchor size is hole size, the Power-Bolt eliminates layout or hole-spotting. As the anchor is driv-en into the hole, the slotted, over-sized annular ring on the bottom of the cone is compressed until it mates perfectly with the hole. This action prevents the anchor from spinning while it is being tightened.

• Removable• Use in concrete, block, brick, stone

5/8 x 4” Power-Bolt .............................................................................$620.00/c**Quantity Pricing Available

PULLOUT LOAD TESTS** OF POWER-BOLT

**NOTE: Test data above represent average ultimate load sustained in concrete having minimum com-pressive strength as indicated.

Embed. Torque 2,000 PSI 4,000 PSISize Depth (ft-lbs.) Shear Tension Shear Tension

3/8” 2” 35 6,525 4,015 7,875 4,840 3/8” 21/2” 35 7,270 5,200 8,155 5,590 3/8” 31/2” 35 8,525 5,585 8,770 6,150

1/2” 21/2” 60 9,455 5,935 9,675 7,415 1/2” 3” 60 10,150 7,325 10,690 9,780 1/2” 5” 60 12,930 8,060 14,740 10,855

5/8” 23/4” 100 15,005 8,070 15,005 8,440 5/8” 3” 100 19,825 8,615 19,995 9,905 5/8” 4” 100 20,065 10,450 20,290 12,685 5/8” 6” 100 20,545 11,255 20,895 15,070

3/4” 3” 120 20,140 10,460 20,140 10,475 3/4” 4” 120 22,935 11,545 26,525 12,345 3/4” 5” 120 25,175 12,610 28,705 15,700 3/4” 7” 120 29,725 14,170 33,125 18,210

SCREW-BOLT+™

The Screw-bolt+ is a one-piece heavy duty screw anchor with a finished hex head. Suitable base mate-rials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. Designed for standard ANSI tolerance bits with a patented thread that offers low installation torque. Ratchet teeth under the hex wash-er head lock against the fixture. Fully removable and re-installable in the same hole.

ULTIMATE LOAD CAPACITIES** IN NORMAL-WEIGHT CONCRETE

**NOTE: The values listed above are ultimate load capacities in pounds which should be reduced by a minimum safety factor of four or greater to determine the allowable working load.

Nominal Anchor Min. Nominal 4,000 PSI Concrete Diameter Embedment Tension Shear (inches) Depth (inches) (pounds) (pounds)

1/4 1 1,530 1,910 1/4 15/8 3,265 1,910 1/4 21/2 4,200 2,335 3/8 11/2 3,330 4,490 3/8 2 4,645 5,465 3/8 31/4 9,065 8,000 3/8 41/2 13,795 8,000 1/2 13/4 3,595 7,570 1/2 21/2 8,450 10,160 1/2 41/4 16,480 11,885 1/2 51/2 19,900 11,885 5/8 21/2 7,255 13,425 5/8 31/4 12,340 15,265 5/8 5 18,280 17,295 5/8 61/4 25,955 17,295 3/4 21/2 7,635 14,690 3/4 41/4 15,050 21,575 3/4 5 24,055 21,575 3/4 61/4 25,920 21,575

1/2 x 4” Screw-Bolt+ ...........................................................................$135.00/c**Quantity Pricing Available

CONCRETE AND MASONRY SCREW ANCHORS

• Fast installation…drill a hole…drive an anchor.

• Available in 3/16”, 1/4” and 3/8” diameters and in lengths 11/4” to 6”.

• Replaces expansion anchors, plugs and screws.

• No need to pre-spot holes… and no inserts required.

• Reversible and removable… can be installed close to an edge.

• Blue ceramic coating on 3/16” and 1/4” diameters. Zinc plating on 3/8” diameters. White and Silver available on Phillips head only.

NOTE: 1” minimum and 13/4” maximum embedment recom-mended in concrete, brick, and block. Additional hole depth 1/4” minimum.

1. Concrete must be 1.5 x embedment. 2. Spacing and edge distance requirements available on request.

PERFORMANCE DATAThe following load capacities are based on testing conducted according to ASTM Standard E 488.ULTIMATE LOAD CAPACITIES - CONCRETE (CARBON STEEL)

NOTE: The values listed in the tables above are ultimate load capacities in pounds which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load in concrete, the ultimate load capacities in pounds should be reduced by a safety factor of 4 or greater for masonry base materials depending upon anchor application and governing building code. The consistency of hollow block and brick varies greatly. The load capacities listed should be used as guidelines only. Job site tests should be conducted to determine actual load capacities in block and brick.

ANCHOR EMBED. 2,000 PSI CONCRETE 4,000 PSI CONCRETE 6,000 PSI CONCRETESIZE DEPTH TENSION SHEAR TENSION SHEAR TENSION SHEAR(IN) (IN) (LBS.) (LBS.) (LBS.) (LBS.) (LBS.) (LBS.)

3/16” 1” 330 700 615 775 710 9803/16” 1-1/2” 880 980 1,055 1,060 1,275 1,1801/4” 1” 620 830 1,060 1,015 1,140 1,3201/4” 1-1/2” 1,000 1,430 1,630 1,635 1,770 1,980

ULTIMATE LOAD CAPACITIES - C-90 HOLLOW BLOCK AND SOLID RED BRICK (CARBON STEEL)

ANCHOR EMBED. ASTM C-90 HOLLOW BLOCKSIZE DEPTH TENSION SHEAR(IN) (IN) (LBS.) (LBS.)

3/16” 1” 445 9203/16” 1-1/4” 530 1,0203/16” 1-3/8” 610 1,2253/16” 1-1/2” 610 1,2253/16” 1-3/4” 610 1,2251/4” 1” 720 1,1501/4” 1-1/4” 880 1,2701/4” 1-3/8” 1,205 1,8251/4” 1-1/2” 1,205 1,8251/4” 1-3/4” 1,205 1,825

APPROVALS AND LISTINGS• In ternat ional Code Counci l , Evaluation Service (ICC-ES), ESR-3889 for Concrete. Code compliant with 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC and 2009 IRC.• Tested in accordance with ACI 355.2 and ICC-ES AC193 for use in structur-al applications in concrete under the design provisions of ACI 318 (Strength Design Method).• Evaluated and qualified by an accred-ited independent testing lab for rec-ognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).• Evaluated and qualified by an accred-ited independent testing lab for reliabil-ity against brittle failure, e.g. hydrogen embrittlement.

CALL 800-821-5448 OR FAX 800-844-1199

METAL ROOF WALKWAY, ZAMAC & SLEEVE ANCHORS

ZAMAC NAILIN® & HAMMER-SCREW®

The Zamac Nailin (pictured above) has a body of Zamac #7, a special zinc alloy developed for its resistance to corrosion. The expansion device is a nail which can be supplied in either plat-ed steel or stainless steel depending on the degree of corrosion resistance required. These fasteners are manufactured in mush-room head and flat head configurations.

The ZAMAC HAMMER-SCREW (not pictured) provides 40% higher tension load capacity in concrete than the Zamac Nailin. To install, hammer the screw into the anchor body. The screw insert may be backed-out with a #2 phillips screwdriver.

PULLOUT LOAD TESTS** OF ZAMAC NAILIN

• Use in concrete, block, brick and stone• Zamac Nailins are available from 3/16 x 7/8 to 1/4 x 2• Zamac Hammer-Screws are available in 7 lengths from 1/4 x 3/4” to 1/4 x 3”.• Available with a mushroom or flat head• Available with a carbon steel or stainless steel nail1/4 x 11/4” Zamac Nailin (Boxed; 100 Per) ......................$152.85/m*1/4 x 11/4” Zamac Nailin (Bulk; 1,000 Per) ........................139.20/m*1/4 x 11/4” Zamac Hammer-Screw (Boxed; 100 Per) ........221.20/m*1/4 x 11/4” Zamac Hammer-Screw (Bulk; 1,000 Per) ........214.45/m**Quantity Pricing Available

Anchor Diameter 3/16” 1/4” 1/4” 1/4” 1/4”

Embedment Depth 3/4” 5/8” 3/4” 1” 11/4”

Tension Load (lbs.) 400 580 765 875 990

**NOTE: Test data above represents ultimate and allowable load capacity in concrete having mini-mum compressive strength of 4,000 PSI.

3/8 x 17/8” Hex Head Lok-Bolt AS™ .....................................................$24.15/c**Quantity Pricing Available

1. The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4.0 or greater to determine the allowable working load. Consideration of safe-ty factors of 10 or higher may be necessary depending on the application, such as life safety or overhead.

• Door and Window Frame Installations

• Masonry Applications

• Electrical / Mechanical Applications

• Mounting Fixtures on Walls

LOK-BOLT AS™ (SLEEVE ANCHOR)

The Lok-Bolt AS™ anchor is a pre-assembled single unit sleeve anchor available in carbon steel and stainless steel which can be used in con-crete, block, brick and stone. Extension sleeves are added to create longer lengths.Ultimate Load Capacities for Lok-Bolt AS™Carbon and Stainless Steel in Normal-Weight Concrete1

5/8 / (15.9) 620 / (2.8) 1,200 / (5.4)

11/8 / (28.6) 1,150 / (5.1) 1,520 / (6.8)

5/16 / (7.9) 11/2 / (38.1) 2,040 / (9.0) 1,520 / (6.8)

3/8 / (9.5) 15/8 / (41.3) 2,680 / (12.1) 2,440 / (11.0)

1/2 / (12.7) 21/4 / (57.2) 5,015 / (22.6) 4,220 / (19.0)

5/8 / (15.9) 21/4 / (57.2) 5,860 / (26.4) 7,200 / (32.4)

3/4 / (19.1) 21/4 / (57.2) 8,420 / (37.9) 11,670 / (52.5)

Anchor Minimum Diameter Embed. Depth d hv in. in. (mm) (mm)

MaximumTightening

Torquemax ft-lbs.Carbon Stainless

3-4 2-3

6-8 –

12-16 8-11

20-28 15-20

45-60 30-40

70-90 45-60

Tension Shear lbs. lbs. (kN) (kN)

Min. Concrete Compressive Strength4,000 PSI (27.6 MPa)

1/4 / (6.4)

METAL ROOF WALKWAY

ROOF WALKWAY PRODUCT SPECIFICATIONS• 18 GA galvanized steel • M-clips, fasteners and supports• 12” wide x 120” long x 21/2” high • Pitch corrected when specified• Interlocking plank design • Optional safety handrail / toe board• Pierced / punched anti-skid surface • R-panel or standing seam roof

Provides safe access to rooftop equipment while eliminating the poten-tial for damage to expensive metal roof systems.

Attaches to standing seam roof panels with non-penetrating clamps and hat channel sup-ports. R-panel application utilizes hat channel support plates that secure directly to the purlins.

Walkway can be fitted with hand-rails as required by local code / OSHA standards. Other options include toe boards, pitch correc-tion and painted.

SKYLIGHT FALL PROTECTION• Tested to comply with national and

local OSHA standards

• Ideal for R-panel, standing seam or curb mount skylight systems

• Installs over flat skylights or under domed skylights

• Includes all mounting hardware and supports for complete install

Fall protection for flat or domed skylights. Utilizes OSHA-compliant galva-nized steel safety screen with a maximum 4” x 4” opening. Screen secured with Zinc-coated carbon steel clips and long-life self-drilling fasteners. All required mounting supports and hardware included in kit.

All systems factory-sized to install quickly. Roof-mounted models maintain low profile to create a clean and finished look. Curb mount applications hid-den beneath dome skylight. System can be custom painted to match building exterior.

Application has been tested to comply with both national and local OSHA standards. Test reports available upon request.

TYPE INSTALLATIONR-Panel / High Rib Perimeter channel supports create structural frame. Steel clips secured to frame and screen.

Trapezoidal or Vertical Utility clamps mount to standing seam roof. SteelStanding Seam clips secured to clamp and screen.

Curb-Mount Steel clips secure directly to curb with self drillers. System mounts under skylight dome.


PE1000+PE1000+ is a two-component, high strength adhesive anchoring system. It is designed for bonding threaded rod and reinforcing bar into drilled holes in concrete base materials. Evaluated for installation and use in dry and water-saturated concrete includ-ing water-filled holes. Qualified for seismic and wind loading (see ESR-2583). The system requires injection adhesive in plastic cartridges, mixing nozzles, dispensing tool and hole cleaning equipment. Available in 13 oz. and 20 oz. for use with manual tools or 47 oz. for pneumatic tool.

•Tested in accordance with AC308 for use in structural concrete according to ACI 318 Appendix D (strength design) and as amended by provisions of ICC-ES AC308 Annex A Section 3.3 (www.icc-es.org).•Evaluated and qualified by an accredited independent testing laboratory for use in uncracked concrete.•Compliant with NSF/ANSI Standard 61 for drinking water sys-tem components – health effects; minimum requirements for materials in contact with potable water and water treatment.•Each cartridge comes with one free static mixing nozzle.

Both adhesives are evaluated for use in cracked or uncracked concrete; evaluated for freeze/thaw performance, can be installed in a wide range of base material temperatures and have a cartridge design that allows multiple uses using extra mixing nozzles. Both are available in 10 oz. (use standard caulk gun), 12 oz. or 28 oz. dual cartridges and ship with one mixing nozzle.

All-Thread RodA complete selection of All-Thread Rod is available for immediate ship-ment. Diameters from 1/4” to 2” are available. A wide selection of materials are available including: Carbon Steel (both plain and plated), Hot Dipped Galvanized, 304 Stainless, 316 Stainless, B-7 High Strength and A-242 Corten-Type. The Threaded Rod is available in 3’, 6’, 10’, and 12’ lengths. We can cut-to-length your All-Thread with little or no delay. We also have a wide variety of Hex Coupling Nuts.

C-ClampsA variety of C-Clamps to hang All-Thread Rod from steel purlins are stocked. Typically to accommodate 3/8” All-Thread, C-Clamps are available to accom-modate 3/8” to 7/8” diameter All-Thread.

Setting Times

Cure Time Gel Time

10 hrs minimum at 68°F (20°C) 20 minutes at 68°F (20°C)

Installation Specifications

Anchor Dia. 3/8” 1/2” 5/8” 3/4” 7/8”

ANSI Drill Dia. 7/16” 9/16” 3/4” 7/8” 1”

Min. embedment 23/8” 23/4” 31/8” 31/4” 31/4”

200 SeriesSteel C-Clamp

300 SeriesMalleable Iron Clamp

AC100+ Gold• AC100+ is a good general purpose vinyl-ester adhesive for masonry, block or concrete installation of threaded rod or reinforcing bar. Can use in water saturated concrete.Approvals and listings:ICC-ES ESR-2582 for concrete ESR-3200 for Masonry.

Code compliant with 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC and 2009 IRC.

Tested in accordance with ASTM E 488/ACI 355.4 and ICC-ES AC308 for use in structural concrete with ACI 318-14 Chapter 17 or ACI 318-11/08 appendix D.

Compliant with NSF/ANSI Standard 61 for drinking water system components-health effects; meets requirements for materials in contact with potable water and water treat-ment.

Conforms to requirements of ASTM C 881 and AASHTO M235, types I II, IV and V, Grade 3, Classes A & B.

AC200+• AC200+ is an acrylic adhesive with approx-imately double the strength of AC100+. Use when the specs call for structural installations of threaded rod or reinforcing bar into hard-ened concrete. AC200 is an excellent alterna-tive to HY200 by Hilti.

Approvals and listings:ICC-ES 4027 for cracked and uncracked con-crete.

Code compliant with 2015 IBC, 2015 IRC, 2012 IRC, 2009 IBC and 2009 IRC.

Tested in accordance with ACI 355.4, ASTM E 488 and ICC-ES AC308 for use in structur-al concrete (Design according to ACI318-14, Chapter 17 and ACI 318-11/08 appendix D).

Compliant with NSF/ANSI 61 for drinking water system components-health effects; minimum requirements for materials in con-tact with potable water and water treatment.

Setting Times Base Material Temp Max Work Time (minutes) Full Curing Time AC100+ AC200+ AC100+ AC200+ 23°F 90 50 14 hours 5 hours 32°F 45 25 7 hours 3.5 hours 41°F 25 15 2 hours 2 hours 50°F 15 10 90 min. 1 hour 68°F 6 3 45 min. 40 min. 86°F 4 2 25 min. 30 min.

Installation Specifications AC100+ AC200+Threaded Rod 3/8” 1/2” 5/8” 3/4” 7/8” 1” 11/4” – 3/8” – 1/2” – 5/8” – 3/4” 7/8” 1” – 11/4” –Reinforcing Bar #3 #4 #5 #6 #7 #8 #9 #10 – #3 – #4 – #5 #6 #7 #8 #9 – #10ANSI Drill Dia. 7/16” 9/16” 11/16” 7/8” 1” 11/8” 13/8” 11/2” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 7/8” 1” 11/8” 13/8” 13/8” 11/2”NOTE: HILTI IS A REGISTERED TRADEMARK OF HILTI FASTENING SYSTEMS, TO WHICH DYNAMIC FASTENER SERVICE, INC. HAS NO AFFILIATION.

EPOXIES, C-CLAMPS & ALL-THREAD ROD

CALL 800-821-5448 OR FAX 800-844-1199

PINS AND GASThe TRAK-IT® C5 gas fastening system is designed for use in light-duty applications including; drywall track to concrete, block or steel, lath to con-crete or block, furring strips to concrete or block, and plywood to concrete or block base materials. Fast, efficient and consistent this gas system does not require licensing.

Approvals and listing: International Code Council, Evaluation Service (ICC-ES), ESR-3275 Code compliant with the 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC and 2006 IRC.

A box containing 1,000 3/4” pins and a fuel cell $71.40/box

HANGERMATE THREADED ROD ANCHORING SYSTEM

Use this unique, solid, one-piece threaded rod anchor to support fire sprinklers, piping, cable trays, HVAC/R systems…Specify anchor that accepts 1/4-20 or 3/8-16 threads.Specify if fastening into wood or concrete or steel.Select 3/8-16 anchors with nuts are UL listed and FM approved for 4” pipe in 16 ga. steel (.060”) or thicker steel.

Ultimate Load Capacities when Installed in Steel*: Pounds Steel Thickness .060” .075” .105” .125” .187”PFM2231100 3/8” rod vertical 785 1,140 1,740 2,375 4,695PFM2241100 3/8” rod horizontal 1,740 1,945 2,420 2,570 2,810PFM223110N 3/8” rod w/nut vert 3,435 4,025 4,280 4,690 5,810*The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 3.0 or greater todetermine allowable working load.

Ultimate Tension Load in Pounds**PFM2251000 full embedment to shoulder in Douglas Fir, Pine or Spruce 1,510PFM2211200 1-5/8” embedment in 3,000 PSI concrete 2,545**The loads indicated are average ultimate values achieved under laboratory conditions and appropriate safety factors shouldbe applied for design purposes

Hangs HangsSize Material Support Type 1/4-20 Rod 3/8-16 Rod1/4-20 x 1T3 Steel Overhead Vertical $75.35/c $79.15/c1/4-20 x 1T3 Steel Sidemount Horizontal N/A 95.35/c1/4 x 15/8” Concrete Overhead Vertical 99.55/c 99.95/c1/4 x 2” Wood Overhead Vertical 66.50/c 67.25/c1/4 x 1” Wood Sidemount Horizontal 90.60/c 84.95/cCall for quantity pricing.

KRAFT TOOL CONTRACTOR GRADE FIBERGLASS HANDLE SHOVEL features a resilient 48” long fiberglass handle and heavy 14 gauge tempered steel blade.

PART # POINT BLADE DIM. WT.-LBS. PRICE

GG864F Round 81/2 x 111/2” 5 $27.75GG861F Square 81/4 x 11” 5 27.75

THIS JACKSON® BRAND BLUE MAX™ DIRT SHOVEL was designed to meet the challenges of the demanding contractor. Rolled steps. Dual rivet construction. Ash handle. By True Tem-per. PART # POINT BLADE DIM. WT.-LBS. PRICE

BMDLS Square 10 x 12” 5.0 $19.95

While supplylasts

JACKSON® BRAND BLUE MAX™ CONTRACTOR GRADE DIRT SHOVEL has a 48” handle, hollow back #2 size. By True Temper.

PART # POINT BLADE DIM. WT.-LBS. PRICE

BMTLS Square 10” x 12” 4.0 $17.35

While supplylasts

DH 19mm-37mm & DHW 22mm-37mm fit Hilti DXE37, DXE72, DX400, DX35, DX350, DX35m, DX451, DXA40, DXA41, DX100, DX200 • Other pins and load types are available.

Call for more information.IMPORTANT NOTICE: OSHA regulations require the training and licensing of all powder

actuated tool operators.

NOTE: ALL PRICES ARE FOR ORDERS OF 500 PINS AND 500 LOADS. Call for additional quantity discounts.

Note: Hilti is a Registered Trademark of Hilti Fastening Systems, to which Dynamic Fastener Service Inc. has no affiliation.

PINS FOR POWDER

ACTUATEDTOOLS

SHANK LENGTH

5/8” or 19mm* $5.35/c N/A $ 5.05/c N/A $12.41/c $15.50/c

3/4” or 20mm 4.30/c N/A 8.37/c N/A 9.05/c 12.95/c

1” or 27mm 4.45/c N/A 9.29/c $19.93/c 11.54/c 14.79/c

11/4” or 32mm 5.70/c $12.25/c 9.99/c 21.22/c 11.65/c 14.48/c

11/2” or 37mm 7.10/c 12.45/c 10.50/c 22.24/c

2” or 52mm 8.25/c 13.95/c 12.58/c 23.35/c

21/2” or 62mm 9.05/c 14.20/c N/A 18.48/c 25 Caliber $11.76/c

3” or 72mm 9.15/c 14.45/c 12.30/c 15.18/c 27 Caliber 11.76/c

LOW VELOCITY LOADS“CS SERIES” STRIP

.300 Head .300 Head 8mm Head 8mm Head “D” Series “DW” Series “DH” Series “DHW” Series *Knurled for Steel With 7/8” Washer With 1” Washer

.300 Head 8mm Head “TH” “DHT” Series Series

P.A.T. & HANGEHANGERRMate®


MORTAR TOOLFor removing old mortar, tuck pointing, caulking and seaming. (HAMT)

DIMEN-PART # SIONS TOOL ACCOMMODATED PRICE

HS1820 11/8” x 15” Spline $33.95HS1920 11/8” x 15” SDS-Max 28.30

CONCRETE SLOTTING TOOLFor slotting, cutting concrete, enlarging openings and web breaking between pre-drilled holes. (HAST)

DIMEN-PART # SIONS TOOL ACCOMMODATED PRICE

DW5772 11/8” x 12” Spline $36.700971 11/8” x 12” SDS-Max 36.70

SCALING CHISELFor removing weld spatter, scale or concrete from overflow and seepage. (HASC)

DIMEN- TOOLPART # SIONS ACCOMMODATED PRICE

CHSPSC15012 11/2” x 12” Spline $18.95DW5774 2” x 12” Spline 22.95DW5349 11/2” x 8” SDS-Plus 18.85DW5837 2” x 12” SDS-Max 22.85

COLD CHISELSFor chiseling, scaling, chipping, edging, channeling in brick or concrete. (HACC) DIMEN-PART # SIONS TOOL ACCOMMODATED PRICE

DW5350 7/8” x 10” SDS-Plus $11.65DW5779 7/8” x 12” Spline 13.250952 1” x 12” Spline 14.35DW5780 7/8” x 18” Spline 21.650953 1” x 18” Spline 21.750967 1” x 12” SDS-Max 17.250968 1” x 18” SDS-Max 18.90

CORE BITS, 1 PIECE OR 2 Core bits save effort and drilling time because they do not twist drill the dead center area of the hole. Drill 11/2” to 5” holes through concrete and screening (not rebar). No water or diamond bits necessary. Rope type thread design on driver facili-tates easy disassembly of core bit. (HACB)3” Core Bit (Bit Only) ........................................$1997” Driver (SDS-MAX) ..........................................$6912” Driver (Spline or SDS-MAX) .........................$99

SDS-MAX FOR LARGE HILTI™ HAMMERS Save lots of money on your bits to fit certain DeWalt, Bosch & Hilti large rotary hammers. Bits accommodate current or later Hilti model #: TE52, TE54, TE72, TE74 and TE92 or Bosch 11216 or 11309. Available in 12 diameters from 1/2 to 11/2” and from 13” to 36” over-all lengths. (Note: subtract 5” from the over-all length to determine this bits usable length.) This bit has a Quatro 4-cutter head which increases cutting speed by 15%, extends bit life by 30%, reduces vibration by up to 60% and reduces noise by up to 30% as compared to single tipped carbide bits. The Quatro head design spots accurately and produces rounder holes. Even the life of the rotary ham-mer is improved because, typically, the amperage draw is reduced. (CH)3/4 x 13” O/A SDS-Max Shank (12 Pcs. Any Mix).................................. $39.90/e

SDS-PLUS and SDS-MAX HOLLOW BITSWhen used with a dust extractor, DeWalt’s Hollow drill bit extracts dust while drilling. This reduces operator exposure to dust, speeds up adhesive anchor installation and is OSHA table 1 compliant. SDS-Plus is available in 4 diameters, 1/2” - 3/4” (CNH). SDS-Max are available in 5 diameters, 5/8” - 1-1/8” (CHH).

3/4” x 14-1/2” O/A SDS-Plus (10 pcs. Any Mix) $79.95 ............ 3/4” x 23-3/4” O/A SDS-Max (10 Pcs. Any Mix) $144.00

SDS-PLUS CARBIDE TIPPED DRILL BITSThe very popular SDS-Plus carbide tipped drill bits are available in a wide range of sizes and fit a wide variety of tools. The bits are available in 18 different diameters from 5/32” to 1” and over-all lengths from 4” to 24”. (Note: Subtract 2” from the over-all length to determine a SDS bits usable length.) (CN)

1/4 x 6” O/A SDS-Plus (25 Pcs. Any Mix) ................................................ $3.55/e

BULL POINT BITSStandard Demolition Chisel (HABP)

PART # LENGTH TOOL ACCOMMODATED PRICE

DW5770 12” Spline $12.75DW5771 18” Spline 15.75DW5832 12” SDS-Max 14.30DW5833 18” SDS-Max 16.80

BUSHING TOOL1 or 2 piece tool for roughing concrete to prepare for resurfacing. (HABT)


CHBTH25T 25 tooth Bushing-Head only $40.90CHBHSPL12 Bushing Driver-Spline 31.850975 1-pc. tool for SDS-Max 59.15

ADDITIONAL ADAPTERSWe stock the following adapters: (HAAA)

PART # CONVERTS FROM TO ALLOW FOR PRICE

ADSP2PL Spline Tool SDS-Plus Bits $78.950396 SDS-Max SDS-Plus Bits 73.45DW5351 SDS-Plus Tool 1/2-20 Chuck 17.30DW5353 1/2 Chuck & Key to fit above item 29.95

SPLINE SHANK CARBIDE TIPPED BITS For the larger rotary hammers, there are more hammers manufactured to accom-modate the spline drive system than any other system on the market. The bits are avail-able in 16 different diameters from 3/8” to 2” and over-all lengths from 12” to 36”. (Note: Subtract 5” from the over-all length to determine a spline bits usable length.) Available in standard single cutter bit or the four surface cutting “Quatro™”. The four cutting faces of the Quatro bit increase cutting speed by 15% and extend bit life by 30% – plus vibration is reduced by up to 60% and noise is reduced by up to 30%. The Quatro head design spots accurately and produces rounder holes. Even the life of the rotary hammer is improved because, typically, the amperage draw is reduced. Spline drive bits with Quatro heads are available in 5/8” to 11/2” diameters. (CR)3/4 x 10” O/A SPLINE (Single Cutter) (12 Pcs. Any Mix) .......................$26.90/e3/4 x 10” O/A SPLINE (Quatro Cutter) (12 Pcs. Any Mix) ......................$38.50/e

QUATROQUATRO

STRAIGHT SHANK CARBIDE TIPPED BITSStraight shank carbide tipped bits are designed to accommodate hammer drills requiring a chuck key. They are available in 13 different diameters from 1/8” to 7/8” and in lengths from 3” to 24” over-all. (Note: Deduct 1” to 2” from the over-all length to determine the bits usable length.) (CS)1/4 x 6” O/A Length (25 Pcs. Any Mix) ...................................................... $2.60/e

CARBIDE HAMMER BITS, CHISELS,…

CALL 800-821-5448 OR FAX 800-844-1199

Our supplier is gradually and selectively changing their packaging for our drill bits for steel. Rest as-sured, the new green box and the famous red box are the same premium quality bit made by the same company.

Tap Tap Tap Tap Tap Sizes Sizes Sizes Sizes SizesFrac. Inch Gauge mm To be Frac. Inch Gauge mm To be Frac. Inch Gauge mm To be Frac. Inch Gauge mm To be Frac. Inch mm To be used with used with used with used with used with drills as drills as drills as drills as drills as indicated indicated indicated indicated indicated

.0135 80 .0689 1.75 .1575 4. .2660 H 27/64 .4219 1/2-13 .0138 .35 .0700 50 #2-64 .1590 21 #10-32 .2677 6.8 .4331 11. .0142 .36 .0709 1.8 .1610 20 .2717 6.9 7/16 .4375 1/4-18 Pipe .0145 79 .0728 1.85 .1614 4.1 .2720 I 5/16-24 .4528 11.5 .0150 .38 .0730 49 .1654 4.2 .2756 7. 29/64 .4531 1/2-201/64 .0156 .0748 1.9 .1660 19 .2770 J 15/32 .4688 .0157 .4 .0760 48 .1673 4.25 .2795 7.1 .4724 12. .0160 78 .0768 1.95 .1693 4.3 .2810 K 31/64 .4844 9/16-12 .0165 .42 5/64 .0781 #3-48 .1695 18 9/32 .2812 .4921 12.5 .0173 .44 .0785 47 11/64 .1719 .2835 7.2 1/2 .5000 .0177 .45 .0787 2. .1730 17 #12-24 .2854 7.25 .5118 13. .0180 77 .0807 2.05 .1732 4.4 .2874 7.3 33/64 .5156 9/16-18 .0181 .46 .0810 46 #3-56 .1770 16 .2900 L 17/32 .5312 5/8-11 .0189 .48 .0820 45 .1772 4.5 .2913 7.4 .5315 13.5 .0197 .5 .0827 2.1 .1800 15 #12-28 .2950 M 35/64 .5469 .0200 76 .0846 2.15 .1811 4.6 .2953 7.5 .5512 14. .0210 75 .0860 44 .1820 14 19/64 .2969 9/16 .5625 .0217 .55 .0866 2.2 .1850 13 .2992 7.6 .5709 14.5 .0225 74 .0886 2.25 .1850 4.7 .3020 N 37/64 .5781 5/8-18 .0236 .6 .0890 43 #4-40 .1870 4.75 .3031 7.7 .5906 15. 3/8-18 Pipe .0240 73 .0906 2.3 3/16 .1875 .3051 7.75 19/32 .5938 .0250 72 .0925 2.35 .1890 4.8 .3071 7.8 39/64 .6094 .0256 .65 .0935 42 #4-48 .1890 12 .3110 7.9 .6102 15.5 .0260 71 3/32 .0938 .1910 11 5/16 .3125 3/8-16 5/8 .6250 .0276 .7 .0945 2.4 .1929 4.9 .3150 8. .6299 16. .0280 70 .0960 41 .1935 10 .3160 O 41/64 .6406 .0292 69 .0965 2.45 .1960 9 .3189 8.1 .6496 16.5 .0295 .75 .0980 40 .1969 5. .3228 8.2 21/32 .6562 3/4-10 .0310 68 .0984 2.5 .1990 8 1/4-20 .3230 P .6693 17.1/32 .0312 .0995 39 #5-40 .2008 5.1 .3248 8.25 43/64 .6719 .0315 .8 .1015 38 .2010 7 .3268 8.3 11/16 .6875 3/4-16 .0320 67 .1024 2.6 13/64 .2031 21/64 .3281 .6890 17.5 .0330 66 .1040 37 #5-44 .2040 6 .3307 8.4 45/64 .7031 .0335 .85 .1063 2.7 .2047 5.2 .3320 Q 3/8-24 .7087 18. .0350 65 .1065 36 #6-32 .2055 5 .3346 8.5 23/32 .7188 1/2-14 Pipe .0354 .9 .1083 2.75 .2067 5.25 .3386 8.6 .7283 18.5 .0360 64 7/64 .1094 .2087 5.3 .3390 R 1/8-27 Pipe 47/64 .7344 .0370 63 .1100 35 .2090 4 .3425 8.7 .7480 19. .0374 .95 .1102 2.8 .2126 5.4 11/32 .3438 3/4 .7500 .0380 62 .1110 34 .2130 3 1/4-28 .3445 8.75 49/64 .7656 7/8-9 .0390 61 .1130 33 #6-40 .2165 5.5 .3465 8.8 .7677 19.5 .0394 1. .1142 2.9 7/32 .2188 .3480 S 25/32 .7812 .0400 60 .1160 32 .2205 5.6 .3504 8.9 .7874 20. .0410 59 .1181 3. .2210 2 .3543 9. 51/64 .7969 .0413 1.05 .1200 31 .2244 5.7 .3580 T .8071 20.5 .0420 58 .1220 3.1 .2264 5.75 .3583 9.1 13/16 .8125 7/8-14 .0430 57 1/8 .1250 .2280 1 23/64 .3594 .8268 21. .0433 1.1 .1260 3.2 .2283 5.8 .3622 9.2 53/64 .8281 .0453 1.15 .1280 3.25 .2323 5.9 .3642 9.25 27/32 .8438 .0465 56 .1285 30 .2340 A .3661 9.3 .8465 21.53/64 .0469 #0-80 .1299 3.3 15/64 .2344 .3680 U 7/16-14 55/64 .8594 .0472 1.2 .1339 3.4 .2362 6. .3701 9.4 .8661 22. .0492 1.25 .1360 29 #8-32 .2380 B .3740 9.5 7/8 .8750 1-8 .0512 1.3 .1378 3.5

#8-36 .2402 6.1 3/8 .3750 .8858 22.5

.0520 55 .1405 28 .2420 C .3770 V 57/64 .8906 .0531 1.35 9/64 .1406 .2441 6.2 .3780 9.6 .9055 23. .0550 54 .1417 3.6 .2460 D .3819 9.7 29/32 .9062 .0551 1.4 .1440 27 .2461 6.25 .3839 9.75 59/64 .9219 3/4-14 Pipe .0571 1.45 .1457 3.7 .2480 6.3 .3858 9.8 .9252 23.5 .0591 1.5 .1470 26 1/4 .2500 E .3860 W 7/16-20 15/16 .9375 1-14 .0595 53 #1-64 .1476 3.75 .2520 6.4 .3898 9.9 .9449 24. .0610 1.55

#1-72 .1495 25 #10-24 .2559 6.5 25/64 .3906 61/64 .9531

1/16 .0625 .1496 3.8 .2570 F 5/16-18 .3937 10. .9646 24.5 .0630 1.6 .1520 24 .2598 6.6 .3970 X 31/32 .9688 .0635 52 .1535 3.9 .2610 G .4040 Y .9843 25. .0650 1.65 .1540 23 .2638 6.7 13/32 .4062 63/64 .9844 1-1/8-7 .0669 1.7 5/32 .1562 17/64 .2656 .4130 Z 1 1.0000 .0670 51 #2-56 .1570 22 .2657 6.75 .4134 10.5

=

DRILL BITS FOR STEEL


MODEL HANDLE PILOT NO. TYPE SIZE USED ON PRICEK1 “T” 5/32” 1 $ 4.95K2 THUMB 1/4” 2 7.10K3 THUMB 5/16” 3, 34 & 14N 8.40K4 THUMB 3/8” 36, 16 & 18N 12.65K7 THUMB 7/32” 7 5.95K30 THUMB 15/64” 31 & 81/2N 6.85K32 THUMB 1/4” 32, 33 & 11N 7.25KK “T” 9/32” DC8, SM8, 5.75 74K, 22BA, 23BA, 24BA, 26BA, 29-33 KG1 “T” 1/4” 1/4” & 3/8” 3.55 MULTI-CRAFTANY KEYLEASH FOR ABOVE 4.85

CHUCK KEYS

HAND-TITE™ KEYLESS CHUCK* provides faster bit changeover and 25% higher gripping power than conventional chucks. CHUCKMODEL # CAPACITY MOUNT PRICE30354 3/8” 3/8”-24 $33.1031038 1/2” 1/2”-20 50.9031037 1/2” 3/8”-24 50.90*ASK ABOUT KEYED CHUCKS IN STOCK AS WELL.

CAR REAMERS

Perfect for re-aligning offset or misdirected holes. Three flats across on the shank. Available from 1/4” to 15/16” diameter. (DBR)

STAKE FLAGSUse for all of your marking, survey or flagging needs. 21/2” x 31/2 x 21” stake flags come packaged in a bun-

dle of 100 flags.

10+ 1-9 per ANY MIXPART # COLOR BUNDLE /BUNDLE

64100 Glo-Orange $12.15 $10.5564101 Glo-Pink 12.15 10.5564102 Glo-Lime 12.15 10.55P/N PCS. DIAMETERS LENGTH 1-4 5+

18SM 29 1/16” to 1/2” by 1/64” Stubby (Short) $131.55 $112.6018HD 29 1/16” to 1/2” by 1/64” Jobber (Long) 143.25 122.60

DRILL BIT SETS Our same supreme quality drill bits that come in those popular red square plastic tubes are also available in sets. These bits are designed to drill steel. The two sets below contain 29 fractional bits starting at 1/16” dia. and ending at 1/2” dia. in 1/32” incre-ments. All organized in a retract-able steel case.

UPSIDE-DOWNMARKING PAINTS The conven ience and ease of a remov-able spray-through cap and non-clogging spray tip are featured on all Krylon’s Upside Down Marking Paints. Two varieties of high-solids, fluorescent upside-down paints are stocked:

1) Solvent-based paint formulas are faster dry-ing than water-based and will work at lower tem-peratures. Fine spray increases marking control and drives pigment into surface or soil creating a mark that lasts longer than water-based also pro-vides brighter colors for greater visibility. 2) Water-based paint formulas are less-per-manent markings than solvent-based and are better suited for environmentally-sensitive areas. Improved economical fluorescent colors. VOC. “Clear” upside down solvent based protective coating will extend wear and impede fading on chalk lines and such.

WATER BASED OR SOLVENT BASED*

CANS CANS CANSCOLOR 1-11 12-119 120+

Fluorescent Alert Red Orange, $5.95 $4.95 $4.60Fluorescent Hot-Pink or APWAWhite, Blue, FluorescentGreen or Clear*Add 10% for Alert Red Orange Solvent Based

34” Long Pistol Grip Marking Wand............ $25.50Can Holster..................................................... 9.95

• 17 oz. can. 12 cans per case

ZINC-RICH COLDGALVANIZINGCOMPOUND

This high performance epoxy-based coating fuses zinc to the metal substrate to protect against corrosion – equal to or better than hot-dipped galvanizing! A fast-drying, high solids coating that provides maximum protection to steel exposed to severe corrosive environments. Color dull grey.

Zinc-Rich (#740) has the following properties:• 97%-pure zinc dust.• Excellent anti-sag and anti-setting properties.• May be topcoated with conventional metal

primers or finish coats.• Highly resistant to salt corrosion and water.• Authorized by USDA.• Meets or exceeds performance requirements

for: MIL-P-26915A, MIL-T-26433, MIL-P-21035, MIL-P-46105 and Preece tests.• 14 oz. can. 12 cans per case.

Also available is “Brite Zinc Cold Galvanizing Compound” (#739). Excellent touch-up for welds or repair of galvanized substrates. It is a sacrificial coating that inhibits rust and corrosion to ferrous metals. 14 oz. can. Color brite grey. CANS CANS CANSP/N DESCRIPTION 1-11 12-119 120+

740 Zinc-Rich Compound $10.80 $8.55 $8.10739 Brite Zinc Compound 12.10 9.75 8.45

TAPS AND DIES HIGH SPEED STEEL GROUND THREADTAPS are pictured above in three varieties (from

left to right) Taper, Plug and Bottoming styles. The Taper style is our most popular – accounting for

70% of our tap sales. CARBON STEEL HEXAGON RETHREADING BOLT DIES are primarily used for dressing over bruised or rusty threads, but may be used for occasional cutting of new threads. No special holder is required for this type of die, any wrench large enough will suffice. All taps and dies are available in UNC or UNF thread style. (DBD)

TAPS, DIES, &

CALL 800-821-5448 OR FAX 800-844-1199

VG20EXTension/VG20REPlacement18” chains for 20R $15.90/e

You may combine any VISE-GRIP Product on pages 96 and 97 (except replacement parts and Quick-Grip spring clamps) to reach the 10 pcs. price. Less than 10 pcs. add 15%. All VISE-GRIP products are readily available.

SPRING CLAMPS 10+ITEM NO MIX

58100 $2.70/e58200 3.70/e58300 9.20/e

10+ 20R $25.85/e

LOCKING CHAIN CLAMP

LARGE JAW LOCKING PLIERS

JAW PRICE 10+ITEM LENGTH ADJUSTMENT ANY MIX

12LC® 12” 31/8” $17.9518DR 18” 71/2” 31.95

12LC

18DR

LONG NOSE LOCKING PLIERSWITH WIRE CUTTER

Long nose jaws reach into tight spots where other tools can’t. Built-in wire cutter. Adjusts easily for proper locking pressure. Available in 9”, 6” and 4” sizes. JAW ADJ. JAW PRICE 10+ITEM LENGTH (OPENS TO) THICKNESS ANY MIX

9LN® 9” 3” at tips, 3/16” at tips, $14.15 13/4” at base 13/32” at base 6LN® 6” 21/4” at tips, 1/8” at tips, 11.80* 1” at base 5/16” at base 4LN® 4” 13/4” at tips, 1/8” at tips, 11.10 3/4” at base 1/4” at base *ADD 20% FOR SOFT GRIP VERSION

STRAIGHT JAW LOCKING PLIERSTwo sizes–10” and 7” are available in both standard or soft grip handles. Vice-Grip tools lock instantly, release quickly and adjust to pliers action.

JAW JAW PRICE 10+ITEM LENGTH ADJ. THICK. ANY MIX10R® 10” 11/2” 5/8” $11.457R® 7” 11/8” 7/16” 10.90**ADD 20% FOR SOFT GRIP VERSION

01SG

10R

CURVED JAW LOCKING PLIERSWITH OR WITHOUT WIRE CUTTER JAW JAW WIRE PRICE 10+ITEM LENGTH ADJ. THICK. CUTTER ANY MIX

10CR® 10” 17/8” 3/8” No $11.25*FR10CR 10” 17/8” 3/8” No 13.157CR® 7” 15/8” 5/16” No 11.55*10WR® 10” 17/8” 3/8” Yes 11.25FR10WR® 10” 17/8” 3/8” Yes 12.157WR® 7” 15/8” 5/16” Yes 10.75*FR7WR® 7” 15/8” 5/16” Yes 11.555WR® 5” 11/4” 1/4” Yes 11.254WR® 4” 15/16” 1/4” Yes 9.50*ADD 20% FOR SOFT GRIP VERSION

LOCKING SHEET METAL TOOL AND WELDING CLAMP

The 8R® locking sheet metal tool allows smooth and accurate bends or seams. The 9R® helps keep your welding work aligned by utilizing unique U-shaped jaws. JAW THROAT PRICE 10+ITEM LENGTH WIDTH DEPTH ANY MIX8R® 8” 31/8” 13/4” $16.109R® 9” 23/4” 15/8” 19.90

18SP

SWIVEL PAD LOCKING C-CLAMPS JAW THROAT THROAT PRICE 10+ ITEM LENGTH ADJ. HEIGHT DEPTH ANY MIX

24SP 24” 121/2” 41/2” 151/2” $33.85 18SP 18” 8” 41/2” 91/2” 27.20 11SP 11” 33/4” 33/4” 21/2” 17.75 9SP 9” 41/2” 31/2” 43/4” 16.35 6SP 6” 2” 21/4” 13/8” 12.20 4SP 4” 11/2” 17/8” 1” 10.20

9SP11SP

LOCKING C-CLAMPS JAW THROAT THROAT PRICE 10+ ITEM LENGTH ADJ. HEIGHT DEPTH ANY MIX

24R 24” 121/2” 41/2” 151/2” $32.15 18R 18” 8” 41/2” 91/2” 25.95 11R 11” 33/4” 33/4” 21/2” 15.40 9DR 9” 41/2” 31/2” 43/4” 14.70 6R 6” 2” 21/4” 13/8” 9.55

18R

11R9DR

HAND TOOLS

10WR8R

9R

9LN


Unibit step drill bit can drill up to 13 different size holes 1/8” thick with just one bit. (UB)

ITEM HOLES SIZES SHANK PRICE 10+ ANY MIX#1 13 from 1/8” to 1/2” 1/4” $19.95#2 6 from 3/16” to 1/2” 1/4” 19.95#3 9 from 1/4” to 3/4” 3/8” 36.70#4 12 from 3/16” to 7/8” 3/8” 42.95#5 10 from 1/4” to 13/8” 7/16” 76.15#9 2 holes 7/8” & 11/8” 7/16” 57.65

PART # DESCRIPTION PRICEKL631 7-Piece Nut Driver Set $59.95KL85076 7-Piece Screwdriver Set 64.70

NUT DRIVER OR

SCREW DRIVER

SETS

Both are 7-piece with cushion grip. Nut driv-ers contain 3/16” to 1/2”. Screwdrivers contain 2 Phillips, 3 cabinet tip and 2 keystone tip. Each set contains only nut drivers or only screwdrivers.

CUSHION-GRIP DEMOLITION

DRIVERHeat treated metal shaft runs from strike cap to tip to aid in prying or chiseling.

BLADE TIP WIDTH X SHANKPART # LENGTH X O/A LENGTH PRICE

602-4DD 1/4” x 4” x 9” $17.85602-7DD 5/16” x 7” x 123/8” 23.95

CUSHION-GRIPROUND SHANK

SPECIALPROFILATED®

PHILLIPS TIP (KL)

Tips are profilated to provide a more consistent geometric symmetry than conventional phillips drivers.

POINT SIZE X SHANK PART # LENGTH X O/A LENGTH PRICE

603-1 #2 x 11/4” x 31/8” $ 8.60603-3 #1 x 3” x 63/4” 8.65603-4 #2 x 4” x 83/4” 9.45603-6 #3 x 6” x 11” 13.25603-7 #2 x 7” x 113/8” 11.15603-10 #2 x 10” x 143/8” 12.65

CUSHION-GRIP HEAVYDUTY

SQUARE SHANK

SLOTTED KEYSTONE TIP

Designed for the most demanding uses. With heavy square shank for wrench-as-sisted turning.

BLADE TIP WIDTH X SHANKPART # LENGTH X O/A LENGTH PRICE

KL600-1 1/4” x 11/2” x 37/16” $ 8.45KL600-4 1/4” x 4” x 811/32” 11.60KL600-6 5/16” x 6”x 1015/16” 13.60KL600-8 3/8” x 8” x 131/16” 18.70KL600-12 1/2” x 12” x 177/16” 22.85

EXPANDING SCREWDRIVER

This versatile screwdriver accepts insert or power bits. Expands from 5” to 11” locking at 1” increments to reach hard-to-reach places. Comes with #1, 2 and 3 phillips, 6-8 and 8-11 slotted insert bits. Integrated bit holder accepts insert and power bits.

PART # DESCRIPTION PRICE1948779 Expanding Screwdriver $8.99

CLOSEOUTBLOWOUT

FOLDING HEX KEY SETSNYLON GRIP

PART # DESCRIPTION PRICE70575 9 Keys. .050” to 3/16” $ 6.9070574 9 Keys. 5/16” to 1/4” 8.2070570 5 Keys. 3/16” to 3/8” 11.4570573 12 Keys. 5/64” to 5/32” (6) 11.15 & 1.5mm to 5mm (6)

METAL GRIP

PART # DESCRIPTION PRICE70581 8 Keys. .050” to 5/32” $ 6.9070591 9 Keys. 5/64” to 1/4” 10.4070579 5 Keys. 3/16” to 3/8” 12.7070582 7 Keys. 1.5mm to 6mm 7.95

PART # SIZES PRICE

394002 5/16”, 10mm, 13mm, 11/16” & 3/4” $ 25.75* 1876229 Deepwell set, 1/4”/6mm, 137.00* 5/16”/8mm, 3/8”, 10mm, 7/16”/11mm, 12mm, 1/2”, 13mm, 9/16”/14mm, 5/8”/16mm, 17mm, 11/16”, 3/4”/19mm, 3/8” drive, 1/4” to 3/8” adapter *WHILE SUPPLY LASTS

PART # SIZES PRICE

394100 3/16”, 1/4” 5/16”, 3/8” 7/16”, 1/2” & 10mm $31.95

is designed to grip and re-move rusted tight, rounded off, painted over, and just plain nasty nuts and bolts. 3/8” sq. dr.

Bolt extractors work much like the bolt grip above but have a 1/4” hex shank to fit most drills and impact drivers.

SL300 BAR CLAMPOne-hand bar clamp provides 300 lbs. of clamping force. Features an I-beam bar to pre-vent flexing, removable pads and 31/4” throat depth (VG)

MAX. PRICE 10+ITEM OPENING ANY MIX506QCN 6” $23.85512QCN 12” 28.50518QCN 18” 31.60524QCN 24” 33.80536QCN 36” 38.40

BAR CLAMPF-style heavy duty I-beam bar clamp capable of up to 1150 lbs. of clamping force. Resists flexing, bowing and features a passive lock. CLAMPING THROATITEM CAPACITY DEPTH PRICE

223212 12” 47/8” $26.75223218 18” 47/8” 31.15223224 24” 47/8” 33.95223230 30” 47/8” 38.70

& HAND TOOLS

CALL 800-821-5448 OR FAX 800-844-1199

WRENCH AND SOCKET SETS

PART # SETS DESCRIPTION PRICE85-450 Wrench 11-Pieces, 3/8” to 1” $43.4085-990 Wrench 14-Pieces, 3/8” to 11/4” 74.1585-783 Wrench 20-Pieces, 1/4” to 7/8” 53.20 8mm-18mm85-388 Socket 1/4” Drive, 21-Piece 28.6585-404 Socket 3/8” Drive, 20-Piece 45.8585-425 Socket 1/2” Drive, 17-Piece 59.95

142 PIECE MECHANICS TOOL SET

This rugged tool set includes: 1/4”, 3/8” pear head ratchets, 1/4” and 3/8” drive sockets in SAE and Metric with exten-sions, 10 combination wrenches in SAE and Metric, 22 pc bit set, 15 nut driver bits in SAE and Metric, hex key set and vinyl handle multi-driver. The sockets feature DirectTorque™ technology to provide a better grip and help prevent rounding of fasteners.

PART # DESCRIPTION PRICEDWMT73802 142 pc. 1/4” & 3/8” Drive Mechanics Set $114.00

RATCHET DRIVES• Fine tooth (72 teeth) design or a 5 degree swing.• Chrome Vanadium steel for extra strength.• Meets ANSI load specs.

PART # DRIVE SIZE O/A LENGTH PRICE

RD08BK 1/4” Square 51/2” $14.25RD12BK 3/8” Square 81/8” 19.60RD16BK 1/2” Square 10” 24.40

# OFPART # PIECES SQ DR PRICE

CTK148MPSET 148 1/4”, 3/8”, 1/2” $133.15CTK170MP 170 1/4”, 3/8”, 1/2” 159.65

TOOL SETSBeauty and brawn. These tool sets are tough enough to meet all of the new ANSI and ASME strength specifications.

CTK170MP

VALUE PACKWhat a great package deal. By far, Stanley’s #1 most popular power tape (1” x 25’ Chrome Powerlock #33-425) coupled with Stanley’s #1 utility knife (once again, by far Stanley’s most popular retractable utility knife 10-099).

90-082 VALUE PACK $11.80

or UTILITY KNIVES AND BLADES

STANLEY IRWINDESCRIPTION P/N PRICE P/N PRICERetractable Knife 10-099 $ 4.90 2082101 $ 4.84Non-Retractable Knife 10-299 3.40 2081101 4.74Blades (5 Pack) 11-921 1.46 2084100* 1.78Blades (100 Pk. Dispenser) 11-921A 15.65 2084400* 25.95Blades (400 Pk. Bulk) 11-921B 58.15 N/A N/AHooked Blade (100 Pack) 11-961A 57.95 2087102 35.55*Bi-metal blade stays sharp three times longer and is virtuallyunbreakable.

POWER TAPESChoose from either chrome finished Powerlock or the new Fat Max extra wide series. Both have Mylar coated blades to reduce friction and extend blade life. The Fat Max features 11’ of stand out, heavy duty bumper, spring and top forward lock. Best of all the Fat Max has a non-slip cushion grip built into the case.

PRICEPART # DESCRIPTION 1-23 24+33-116 3/4” x 16’ Chrome Powerlock $11.20 $10.6033-425 1” x 25’ Chrome Powerlock 11.80 11.8033-430 1” x 30’ Chrome Powerlock 14.70 13.9533-835 1” x 35’ Chrome Powerlock 18.15 17.2033-355* 1” x 8M Yellow Powerlock 11.95 11.95*Closeout limited to stock on hand

PRICEPART # DESCRIPTION 1-23 24+33-716 11/4” x 16’ Fat Max $19.65 $18.7033-725 11/4” x 25’ Fat Max 21.55 20.5033-730 11/4” x 30’ Fat Max 24.75 23.5533-735 11/4” x 35’ Fat Max 32.45 30.80


POWER TAPESThe Lufkin line of tapes includes Hi-Viz P1000 series and the Chrome P2000 series that feature:• Up to a 9 foot standout on the 1” wide blades.• Ny-Clad™ nylon powder coated blades that last 5x longer than other heavy duty blades.• Quad Hook® 4 rivet end hook on 1” tapes to outlast the competition. • Forward convenient toggle locks and cushioned blade returns.• Lightweight cases designed to withstand tough jobsite conditions.

STEEL TAPESHigh impact polystyrene case. Easy wind nylon drum.

PART # BLADE SIZE PRICE

50 3/8” x 50’ $16.95ST100 3/8” x 100’ 33.40

FIBERGLASS TAPESSturdy open case has a long handle for fast and effortless winding.

PART # DESCRIPTION PRICE FE100 1/2” x 100’ Fiberglass–Open $20.90 ReelFE200 1/2” x 200’ Fiberglass–Open 32.30 ReelFE300 1/2” x 300’ Fiberglass-Open 51.40 Reel

NYLON CLADIntroducing Lufkin’s New Atlas Ny-Clad™, 1/2” flex-ible steel blade (not 3/8” like many others) coated with a thick layer of nylon. Bright yellow blade with black and red markings.

PART # DESCRIPTION PRICEPS1806N 1/2” x 100’ Steel Nylon Clad $60.60PS1808N 1/2” x 200’ Steel Nylon Clad 96.15

FOLDINGWOOD RULES

Lufkin’s Red End® series. Marked both sides, both edges to 1/16”. Inside markings. Numbering begins on inside of rule; measurement lies close to the work. 16” stud centers in red. 6’ x 5/8”.


066F 6’ Folding Wood Ruler $14.25

PRICE PRICEPART # HI-VIZ CASE 1-23 PC. 24+ PART # CHROME CASE 1-23 PC. 24+PHV1312 3/4” x 12’ $10.70 $ 9.85 P2312 3/4” x 12’ $13.60 $12.50PHV1316 3/4” x 16’ 12.25 11.25 P2125 1” x 25’ 19.35 17.80PHV1425 1” x 25’ 15.85 14.60 P2133 1” x 33’ 22.95 21.20PHV1433 1” x 33’ 18.85 17.35 L525 Self-centering tapes 1” x 25’ CLOSEOUT 6.45HV1048CME 1” x 25’ 12.80 11.90 while supplies last (7.6m) eng./metricL725MAG 1” x 25’ 12.30 11.30 Magnetic tip

So, you can’t believe this low price? Well rest assured. These tapes come with a 30 day unconditional 100% satisfaction guarantee or your money back. These power tapes have less than a 1% return rate which is comparable to the high cost competition.

The blade stays stiff extended out 71/2’. Black bold numbers on bright yellow acrylic coated blade. Steel belt clip. (EL)

SIZE PART # 1-47 48+

1” x 25’ 626 $8.65 $7.981” x 30’ 636 9.95 9.25

1” x 25’ POWER TAPE

12” PROFESSIONAL SAE MEASURING

WHEEL• Bolstered folding joint for compact storage• Glare-resistant counter displays grad-uations in feet/inches.• Gear-based measuring system is more accurate than the traditional belt counter.• Aggressive wheel tread for improved traction.• Built in kickstand supports wheel while recording the measurement.• Analog counter dial resets at 10,000 ft.

Model # PSWM48N $81.75

MEASURING TAPES

CALL 800-821-5448 OR FAX 800-844-1199

MODEL FREQ. BAND CHANNELS BUILT-IN FREQ. PRICE (1-5) PRICE (6+)

DTR600 900 MHz ISM 30 Frequency Hopping $339 $319

RDU4100 UHF 438 -470 MHz 10 89 $299 $279

RDU2080 UHF 450 -470 MHz 8 99 $259 $239

MODEL DESCRIPTION PRICE

HKLN4606 External speaker with Push-to-Talk mic $ 63PMPN4465A 6-unit charger for DTR600 349RLN6309 6-unit charger for RD models 229PMLN6384 6-unit charger for RM models 239RLN6351 Standard li-ion battery for RD models 70PMNN4434 Standard li-ion battery for RM models 65PMNN4578A Standard li-ion battery for DTR600 66

RADIOS

ACCESSORIES

,

DTR600 RDU4100 RMU2080

If your workers are not using Motorola radios, you are wasting thousands of dollars every year.

TWO-WAY BUSINESS RADIOS & ACCESSORIES

REDUCE YOUR LABOR COSTS

MANUFACTURERS CONTRACTORS

STOPWASTING

TIME

LENGTH MAX FULL BOXPART # (w/hooks) STRETCH 1-9 10-49 OF 50

52210 14” 18” $1.89 $1.66 $1.4552215 19” 27” 2.29 1.99 1.7552221 24” 36” 2.57 2.25 1.9652231 35” 54” 3.18 2.79 2.4352241 45” 66” 4.55 3.98 3.47Different sizes are NOT combinable for quantity price break.

GOLDLINE® tie down straps are made of heavy duty fleet grade EPDM rubber. These made in USA straps are weather resistant and have a temperature range of -20F to +130F. Packaged 10 straps per bag. Maximum stretch is conveniently stamped on the back of every strap. Do not exceed maximum stretch.

RUBBER TIE DOWN STRAPS

40% lighter than cast iron and easier to maneuver. Drop-forged jaw and easy spin adjusting nut are heat-treated for durability. Hammer head design provides a flat surface for hammering. (RT)

LENGTH/ LENGTH/PART # CAPACITY PRICE PART # CAPACITY PRICE

2074110 10”/11/2” $34.40 2074124 24”/3” $112.002074112 12”/2” 56.40 2074136 36”/5” 173.002074114 14”/2” 48.60 2074148 48”/6” 299.002074118 18”/21/2” 60.95

CAST ALUMINUM

PIPE WRENCHES

Drop forged jaw is heat-treated with hard-ened teeth for a better bite. Easy-spin adjusting nut is heat-treated for durability. Hammer head design provides a flat surface for hammering. (RT)

LENGTH/ LENGTH/PART # CAPACITY PRICE PART # CAPACITY PRICE

274105 8”/1” $19.85 274103 18”/21/2” $33.95274101 10”/11/2” 24.95 274104 24”/3” 58.95274106 12”/2” 31.65 274107 36”/5” 119.00274102 14”/2” 27.30 274108 48”/6” 179.00

CAST IRON PIPE

WRENCHES

SUPER HEAVYDUTYTARPAULINSGreen/black 10.0 mil super heavy duty industrial poly tarps. The 8x12 weave has plastic corner bars and is double lam-in-ated. Heat sealed seams and rust proof grommets every 18”. (RPTP) LBS. LBS.SIZE WT. 1-5 6+ SIZE WT. 1-5 6+

12x16’ 5.7 $18.45 $16.95 25x40’ 29.8 $95.95 $88.3016x20’ 9.4 30.75 28.25 30x40’ 35.3 115.25 105.9520x30’ 17.7 57.60 52.95 40x60’ 68.4 229.95 211.60

CONSTRUCTION MASTER PRO HAND HELDCONSTRUCTION MATH CALCULATOR

• Work in and convert between any building dimension, including metric.• Built-in right angle solutions.• Calculate areas, volumes and perimeters.• Complete stair layouts.• Roof, rafter and framing solutions.• Circular calculations: Arcs, circumference, segments and more.

CONSTRUCTION MASTER PRO TRIG• Same as above yet includes full trigonometric function.• Find weight per volume.

CONCRETE CALCULATOR• Calculate area, volume and square-ups.• Stake-out for drops and drainages.• Block and footing for material estimates.• Complete Stair layouts.• Weight per volume for any material.• Rebar linear feet and weight for various rebar sizes.• Truck loads required based on load size.• Equal sided polygons.• Circle area, circumference, arcs, post-holes and more.

All 3 include the paperless tape which saves the last 20 entriesConstruction Master Pro Calculator ..................................................$89.95Pro with Trig Plus ................................................................................$99.95Concrete Calculator ............................................................................$89.95


DOUBLE FACE SLEDGE HAMMERS

Carbon steel forged head, quenched and tempered to 50 HRc hardness. Beveled and polished faces. American Hickory handle. (Never use to strike anoth-er hammer. Never use with a loose or damaged handle.) NET WEIGHT HEAD HANDLEPART # (HEAD ONLY) LENGTH FACE LENGTH PRICE1433DFE 2 LBS. 41/2” 15/8” 16” $18.201434DFE 3 LBS. 51/8” 13/4” 16” 20.601435DFE 4 LBS. 55/8” 21/16” 16” 25.601436DFG 6 LBS. 6” 23/16” 36” 34.551437DFG 8 LBS. 61/2” 23/8” 36” 37.951438DFG 10 LBS. 67/8” 21/2” 36” 41.651439DFG 12 LBS. 711/16” 211/16” 36” 46.401440DFG 16 LBS. 87/16” 215/16” 36” 59.55

COMPO-CASTSOFT-FACE HAMMERS

Non-sparking polyurethane constructed hammers are of one-piece design with no exposed metal. Soft face “dead blow” won’t mar surfaces and doesn’t absorb liquids. (SL) HAMMER OVERALLPART # WEIGHT LENGTH PRICE57-530 10 oz. 101/8” $23.4557-531 18 oz. 111/4” 29.4557-532 21 oz. 123/4” 34.3057-533 42 oz. 14” 48.3557-534 52 oz. 16” 66.3057-550 5.0 lbs. 195/8” 94.30

ANTI VIBE HAMMERSThese one piece forged steel hammers feature a patented tuning fork design. They offer three times more vibration reduction than the leading one piece forged steel hammer. Featuring ergonomic handles with a rubber grip molded directly onto the shaft. (SL)

CLAW HEADPART # TYPE WEIGHT FACE PRICE51-162 Curved 16 oz. Smooth $25.7051-163 Ripping 16 oz. Smooth 25.7051-165 Ripping 20 oz. Smooth 28.1051-167 Framing 22 oz. Checkered 31.75

ADJUSTABLE WRENCHES Crescent, the original name in adjustable wrench-es. Polished head and satin finished handle. Chrome plated. (CW)

O/A MAX. JAWPART # LENGTH OPENING PRICEAC26VS 6” 3/4” $16.15AC28VS 8” 15/16” 16.75AC210VS 10” 11/8” 22.10AC212VS 12” 15/16” 33.85AC215VS 15” 111/16” 50.45AC218VS 18” 21/16” 85.75

BOLT CUTTERSH.K. Porter’s center and end cut bolt cutters. Our AC series cutters have precision cast, aircraft grade aluminum handles. The MC, MCD and ME series cutters have all steel tubular handles. (HK)

(LBS.) CUTTING CUTTINGPART # WEIGHT LGTH. STYLE CAPACITY PRICE0090MCD 5.00 18” Center 3/8” $ 710090MC 3.50 18” Center 3/8” 1040190MC 5.25 24” Center 7/16” 1210290MC 8.50 30” Center 7/16” 1440390MC 12.88 36” Center 1/2” 1710590MC 17.13 42” Center 9/16” 223

FIBERGLASS HAMMERSLightweight, durable fiberglass handle with comfort-able cushion grip. Three different grades available with either curved claw or ripping claw. (PH) CLAW HEADPART # TYPE WEIGHT GRADE LENGTH PRICE11-400 Curved 20 oz. Premium 131/2” $23.8011-414 Ripping 22 oz. Premium 131/2” 25.3011-405 Curved 20 oz. Standard 131/2” 21.9511-418 Ripping 20 oz. Standard 131/2” 21.9511-894 Ripping 28 oz. Wood Hndl. 171/2” 29.80**WHILE SUPPLIES LAST

PORTABLE RECHARGEABLE BATTERY

Designed to charge mobile devices like cell phones, tablets, portable headphones and other smaller USB devices.

QUICK USBC TO LED mAh TOTAL CHARGE 12.5W 15W USBC WORKPART# CAP. POWER USBA USBA USBC CABLE INC. LIGHT PRICEKTB1 10050 18W Yes No Yes Yes No $44.75KTB2 13400 28W Yes Yes Yes Yes No $56.75

ENERGIZER®

ALKALINE BATTERIES PACK BROKE PKG. PACKPART # SIZE QTY. PRICE/ea PRICE/eaEN91 AA 24 $ .63/e $ .54/eEN92 AAA 24 .63/e .54/eEN93 C 12 1.18/e 1.15/eEN95 D 12 1.98/e 1.68/eEN22 9V 12 2.59/e 2.20/e

EVEREADY® LIGHTSWATER & IMPACT RESISTANT

BATTERIESPART # DESCRIPTION LUMENS INCLUDED PRICE1151L 2AA LED Flashlight 30 No $ 3.90*1251L 2D LED Flashlight 35 No 6.95*HDA32E 3AAA 2 mode LED 80 Yes 17.25* Pivoting Headlight*While supplies last

1251L

HDA32E

CALL 800-821-5448 OR FAX 800-844-1199

PATTERN SNIPSThree styles are stocked for tradesmen: straight, duckbill and bulldog patterns. All have cushion handles and are hand edged for maximum cutting efficiency. (MPW) O/A BLADE PART # PATTERN LENGTH LENGTH CAPACITY* PRICE

A11N Straight 93/4” 21/4” 23 Ga. $22.95A10N Straight 11” 21/2” 21 Ga. 27.15A9N Straight 121/2” 3” 20 Ga. 27.70W5N Bulldog 161/2” 21/2” 16 Ga. 66.35V19 Duckbill 13” 3” 21 Ga. 29.75*RECOMMENDED MAX. CAPACITY FOR LOW CARBON COLD ROLLED STEEL

HANDSEAMER

High leverage compound action handles for easy metal bending and flattening. Produces a per-manent tight fitting seam. 1/4” incremental depth marks on jaw. Polished metal finish and cush-ioned grips. JAW JAWPART # DEPTH WIDTH LENGTH PRICEMPWS3 1/4”-11/4” 31/4” 83/4” $45.95MPWS4 1/4”-11/4” 31/4” 9” $48.95

HANDCRIMPER AND NOTCHER

Crimpers used up to 22 ga. sheet metal. Ideal for joining sheet metal pipes of the same size. Notcher produces a true 30° v-shaped cut in sheet metal without slippage. All have compound action and cushioned handles. (MPW) THROAT O/A # OFPART # USE DEPTH LENGTH BLADES PRICEWC3S Crimp 11/4” 91/4” 3 $29.65WC5S Crimp 11/4” 91/4” 5 28.85HN-1 Notch 13/16” 81/2” – 42.55

SNIPSWiss Metalmaster Snips have “non-slip” serrated jaws made of extra tough and wear-resistant spe-cial molybdenum steel. This provides the extra service demanded by the compound lever action. Maximum recommended cutting capacity is 18 gauge mild steel, unless otherwise noted. (MPW)

PART # DESCRIPTION PRICEM-1R Cuts Straight and Left, Red Grips. Max cut 13/8” $16.60M-2R Cuts Straight and Right, Green Grips. Max cut 13/8” 16.60M-3R Cuts Straight, Yellow Grips. Max cut 13/8” 16.60M-300 Cuts Straight, Orange Grips, Max cut 3” 18.70M-6R Offset, Straight and Left, Red Grips 19.35M-7R Offset, Straight and Right, Green Grips 19.35M-80S Offset, Straight, Yellow Grips, 3” Blade Length 19.35M-400* Offset, Straight and Left, 3” Tinner Length Blade 16.90Holster Leather or Ballistic Nylon Holster for any Snip 2.95

PART # DESCRIPTION PRICEM-1R-S1 Special series to cut up to 18 Ga. S/S $30.95M-2R-S1 Special series to cut up to 18 Ga. S/S 30.95M-5R “Bulldog” to cut up to 16 Ga. Steel 27.30Replacement spring for any snip .49*While supplies last

BENDER/SEAMING TOOL

We offer 2 tools for forming flashing, ductwork, fascia and other sheet metal materials. The MWS59 comes with a 5” and 9” blade. It has a 2” deep jaw with the first 1” marked in 1/4” graduations. Capacity is .030 aluminum. The MWS36 comes with a 3” and 6” blade. It has a 11/4” deep jaw marked in 1/4” graduations. The capacity with steel blades is 22 ga. cold rolled steel, 24 ga. stainless steel, 20 ga. aluminum, 22 ga. copper and 22 ga. galvanized. (MP)

PART # DESCRIPTION PRICEMWS36 Tool w/3” and 6” steel blades $59.70MWS59 Tool w/5” and 9” aluminum blades 69.40

PART # UPRIGHT SNIP PRICE

MPMP6900-L Cuts Left. Red Grips $22.95MPMP6900-R Cuts Right. Green Grips 22.95

90° ANGLED SNIPS

90° angled snips by . Cutting action creates less fatigue because user’s wrist isn’t forced to bend. Makes cutting easier if mate-rial can’t be turned or when cutting in confined areas. Handle spread is only 51/2”. Max cut is 11/4”. Cutting capacity is 24 gauge cold rolled steel.

MPWS3 MPWS4

SHEET METAL TOOLS


These Snips can cut up to 18 gauge cold rolled steel. Double overwind spring is guaranteed for life. 93/4” nominal length. KUSH’N-POWER® grips comfort user’s hand and prevents steel handles from wearing through. (MPMP)

Bends and flattens soft sheet metal up to 22 gauge. Straight handle or high leverage offset handle. 11/4” jaw depth. 81/4” nomi-nal length. Only M-S2 has offset handle. (MPMF) JAWP/N WIDTH PRICEM-S1 33/16” $44.25M-S2 33/16” 49.35M-S6 6” 45.55M-S9 9” 53.80

SEAMERS

ITEM DESCRIPTION PRICE101 (2073111) Cuts left & straight, Red. $15.20102 (2073112) Cuts right & straight, Green. 15.20103 (2073113) Cuts straight only, Yellow. 15.20

AVIATION SNIPSIrwin® Aviation snips have Precision-Formed™ blades for ease of cut, lon-ger life and greater strength than forged blades. Over-molded soft grips provide better comfort. Cutting capacity in cold rolled steel is 18 ga. and stainless steel 22 ga. length of cut is 15/16” and O/A length is 10”. (VG)

SNIPSOffset snips keep hands comfortably above work. Precision-Formed™ blades are stronger and last longer than forged blades. Cutting capacity in cold-rolled steel is 18 ga. and in stainless steel 22 ga. Length of cut is 13/16” and O/A length is 91/2”. (VG)

ITEM DESCRIPTION PRICE

20SL (2073211) Cuts left & straight, Red $17.7520SR (2073212) Cuts right & straight, Green 17.75

M-S1

SNIPS

P/N DESCRIPTION PRICEP6716-L Cuts Straight and Left. Red Grips $14.85P6716-R Cuts Straight and Right. Green Grips 14.85P6716-S Cuts Straight. Yellow Grips 14.85P6510-L Offset. Straight and Left. Red Grips 20.55P6510-R Offset. Straight and Right. Green Grips 20.55

P/N DESCRIPTION PRICEP6516 Offset Long. Cuts 20 ga. and lighter including $22.65 most low profile corrugations. 1” openingP657N Needle Nose Utility Shear/Snip. 14.90 Capacity 26 ga. steel

The is used to put the hem on an edge detail for architectural panels (gables and eaves). Made of lightweight aluminum. 24” long mouth. The original can only be used with flat panels. DESCRIPTION WT. PRICE

2 LBS. $62.95MP

Double sided throat with preset depths. Use one side for 1” or the opposite side for 3/8”. Simply slide folding tool over edge of material to stop and bend to any angle desired.

FOLDING TOOLS

CAPACITYSTAINLESS COLD ROLLED STEEL STEEL ALUMINUM COPPER 28 ga. 22 ga. 22 ga. 22 ga.

PART # BLADE LENGTH PRICEMWF2 18” $29.95MWF3 24” 30.80

MWF2

SHEET METAL TOOLS

CALL 800-821-5448 OR FAX 800-844-1199

Bending metal on the jobsite JUST GOT EASIER. The Versa-Bender fab-ricates metal such as counter flashing, saddles, fascia, tile pans and metal panels on the jobsite. It quickly adjusts to the desired bending depth of 5/8” to 71/2”. Bends metal along continuous line up to 90° by sliding rollers back and forth along edge of steel. It bends 24 gauge painted metal and .040 alu-minum. 5-point adjustable handle. Auxiliarily handle on roller shaft for more leverage and less fatigue. Extra roller bearings on the face plate helps keep the metal in place while bending. Foam comfort grips on shafts.

The Double Station Versa-Bender has an additional set of rollers to allow for maximum efficiency, better uniform bending and less operator fatigue as compared to the original single station Versa Bender. (MPV)

VERSA-BENDER PRICE

Single Station $535 Double Station 785

The Versa-Hemmer compliments the Versa-Bender by completing the 90° bend to a complete 180° fold. The Versa-Hemmer is easy to use on the jobsite with no special training needed. It can bend a depth of 1/2” to 11/2”. The Versa-Hemmer can bend up to 24 gauge painted steel and .040” aluminum, copper and zinc. Simply insert the metal that is already bent to 90° between the metal disc and the rollers. Slowly slide the disc back and forth to gradually bend the edge of the metal down to 180°. Tool has a top handle and a 3-point adjustable bottom handle for ease and comfort. The Versa-Hemmer is great for hemming panels for valleys, rake edges and interlocking metal. (MPV) VERSA-HEMMER $885

VERSA-BENDER

VERSA-HEMMER

ITEM No. DESCRIPTION PRICEM48AR0 PBR/R Panel Shear - 36” coverage $995 panel, 11/4” rib height, 12” O.C.M48FG0 AG Panel Shear - 36” coverage 995 panel, 3/4” high ribs, 9” O.C.48050* PBR/R panel extra blade set 29948323* Butler Rib II extra blade set 29948046* AG Panel extra blade set 29948092* U Panel blade set. 3/4” high ribs, 6” O.C. 299

Over the last sixty years, Swenson’s tried and true pivot shears have proven to be an essential tool out on the job site and in the shop. Easily shear exposed fastener profiles in one quick, clean chop. Blades are specificto the desired panel profile allowing for the best possible, straight cut. Manual operation leaves a clean, burr-free edge and eliminates the hassle of power cords, hot flying metal and hand snips. (MPS)

PITTSBURGH SEAM LOCKERF 301-2

This tool is loved by HVAC contractors. It provides a quick, easy, whisper quiet alternative to close a pittsburgh lock for air ducts, downspouts and radius trim. Automatic feed control.

NOTE: A lip of 5/16” or 3/8” is ideal for the seam that you need to close – but a 1/4” lip is the minimum amount of material necessary to allow the use of this tool.

Standard equipment: Universal oil, plastic case.

Specifications: 4.3-amps (120V, AC only), thickness of steel that tool can bend: min. is .018” (26 gauge) and max is .042” (19 gauge), resulting flange height: .250” if steel is .018 to .030” or .433” if steel is .031” to .042”. Working speed is 13 to 20 ft./min. on curved elbow ducts the smallest workable radius is: 6” inner and 12” outer, 12 lbs. tool wt.

SPECIAL PRICE$2,430

*Must specify M42 or M48 shear when ordering replacement blades

SHEET METAL TOOLS

MODEL #48SHEAR

*Must specify M42 or M48 shear when ordering replacement blades


DIAGONAL CUTTING PLIERS (KL)

PART # DESCRIPTION PRICED248-9ST 9” Angled Head Pliers for Rebar Work $31.35D228-8 8” with Red Plastic-Dipped Handles 29.90D2000-28 Ditto with Ultra-Durable Cutting Knives 35.25D248-8 8” with Angled Head 31.10D2000-48 Ditto with Ultra-Durable Cutting Knives 37.95

D248-9ST

SIDE CUTTING PLIERS (LINEMAN’S PLIERS) (KL)

PART # DESCRIPTION PRICED213-9NE 91/4” with Blue Plastic-Dipped Handles $36.90J213-9NE 91/4” with Comfort Grip Handles 46.50D2000-9NE With Ultra-Durable Cutting Knives 47.70J2000-9NE With Ultra-Durable Cutting Knives/Comfort Grip Handles 51.90

J213-9NE

SIDE CUTTING PLIERS (IRONWORKER’S/RODMAN’S PLIERS) (KL)

PART # DESCRIPTION PRICED213-9ST 99/32” with Blue Plastic-Dipped Handles $44.90D2000-9ST Ditto With Ultra-Durable Cutting Knives 57.60D201-7CST 83/4” For Cutting Soft Annealed Tire Wire 45.90D2000-7CST Ditto with Ultra-Durable Cutting Knives 56.50

D2000-7CST

AGGRESSIVE KNURL SIDE CUTTING PLIERS (KL)

PART # DESCRIPTION PRICED201-7CSTA 83/4” for Cutting Soft Annealed Tie Wire $45.90

D201-7CSTA

TONGUE & GROOVE PLIERS (CK)


420 91/2” Tongue & Groove Plier 11/2” Capacity $16.20430 10” Tongue & Groove Plier 2” Capacity 16.94440 12” Tongue & Groove Plier 21/4” Capacity 19.25

440

CUTTING PLIERS (CK)


337 7” Diagonal Cutter, Lap Joint $20.40447 73/4” Diagonal Cutter, Box Joint 25.95357 7” End Cutting Plier (Nipper) 23.55

337

PLIERS (CK)


317 71/2” Long Nose Plier with Side Cutter $22.603017 71/2” Long Nose Plier without Cutter 19.30369 9” Lineman’s Plier Hi-Leverage Round Nose 29.60350S 9” Ironworker’s Plier with Coiled Spring 30.85

317

Industrial Grade Sealerfor Steel BandingSpecify 1/2” or 3/4” $99

Steel Banding CartFor 16” coils $314

Industrial Grade Tensioner for Steel BandingFits 1/2” or 3/4” wide $265

Seals for Steel Banding1/2” Box of 5000 $1793/4” Box of 5000 $179

Coiled Steel Banding(nominal 100 lbs.)1/2” or 3/4” x .020 $142

CURRENTLY, THIS PRODUCT IS FOB OUR KANSAS CITY WAREHOUSE (BM)

BANDING, & TOOLS

CALL 800-821-5448 OR FAX 800-844-1199

CONNECTING BARSProvide extra leverage when positioning steel

members and aligning bolt holesPART # DESCRIPTION 1-5 6+KL3245 Round Bar 3/4” x 30” $54.85 $50.45KL3246 Round Bar 7/8” x 36” 68.15 62.70KL3247 Round Bar 3/4” x 24” 45.95 42.33KL3248 Round Bar 7/8” x 30” 62.20 57.25KL3241 Similar to 3245 but Chisel 49.65 45.70 End is straightKLGN3243 Gooseneck Hex Bar 7/8” x 30” 78.95 70.95

BARUse to pull spikes, pry, strip forms, roll pipe, a crow bar, remove shingles,… Efficient blade angle. 3” wide hardened alloy blade with keyhole nail-pulling slot in center and V-notch in tapered edge. Heavy-duty tubular steel handle. 551/2” O/A length. 12.25 lbs.

PART # PRICEKL64306 $99.95

REBAR HICKEYS BENDS HEAD TYPE HICKEY REBAR & BENDING HANDLEPART # SIZE SIZE ANGLE LENGTH PRICE64309 1A #3, 4 Double 24” $158.45 650 & 900

64310 2 #5 Single 650 40” 151.7064311 3 #6 Single 650 40” 170.7064312 4 #7, 8, 9 Single 650 60” 240.95

TAPERED (spud) HANDLERATCHET REVERSIBLE

CONSTRUCTION WRENCHES1/2” square drive. 15” O/A length.

6+MFR. PART # 1-5 ANY MIX

D•F Brand DF3238 $73.25 $66.55

KL3238 89.60 81.50

CONNECTING BAR HOLDER

WITH LOCK COLLARDesigned for use with Klein 7/8” round connecting bars (3246 and 3248). Collar locks onto your bar and allows you to keep your connecting bar on your belt. Prevents the bar from slipping through the loop. Tunnel loop fits belts up to 3 1/2” wide.


5459SLVR Sleeve Bar Holder with Collar $24.355459C Lock Collar only 6.20

D•F is a registered trademark of Dynamic Fastener Service Inc.

TAPERED (spud) HANDLEADJUSTABLE HEAD

CONSTRUCTION WRENCHES

O/A JAW 6+MFR. PART # LGTH WIDTH 1-5 ANY MIX

CW3239 15” 11/2” $77.50 $70.55 CW10JR 105/8” 11/8” 37.75 33.95

KL3239 15” 11/2” 88.60 79.75 KL3227 11” 15/16” 58.55 52.65

D•F Brand DF3239 15” 11/2” 71.50 65.10

NOMINALPART # BOLT SIZE OPENING

TO FIT U.S. HEAVY HEX NUTS

3210 1/2” Bolt Size 7/8”3211 5/8” Bolt Size 11/16”3212 3/4” Bolt Size 11/4”3213 7/8” Bolt Size 17/16”3214 1” Bolt Size 15/8”

TO FIT U.S. REGULAR HEX NUTS

3219 1/2” Bolt Size 3/4”3220 1/2” Bolt Size 13/16”3221 5/8” Bolt Size 1”3222 3/4” Bolt Size 11/8”3223 7/8” Bolt Size 15/16”3224 1” Bolt Size 11/2”

TO FIT U.S. UTILITY HEX NUTS

3231 5/8” Bolt Size 15/16”3232 3/4” Bolt Size 11/16”Metric Sizes available by order. Call for Quote.

D•F (PT)

6+ 1-5 ANY MIX

$33.75 $30.45 36.15 32.25 39.90 35.95 57.55 51.80 64.55 57.95

$33.75 $30.45 N/A N/A 38.95 35.05 39.90 35.95 55.60 50.05 62.25 56.05

N/A N/A N/A N/A

6+ 1-5 ANY MIX

$39.90 $35.90 42.30 38.05 45.55 41.05 64.95 58.50 72.90 65.50

$39.90 $35.90 44.50 39.95 44.50 39.95 47.20 42.45 63.45 57.10 71.05 63.95

$44.50 $39.95 49.50 44.50

(KL)

SPUDERECTION

WRENCHES

BOX ERECTION WRENCHES (12 point)

D•F PART NOMINAL 1-5 6+NUMBER OPENING Price Price

2613 13/16” $ 32.70 $29.452614 7/8” 33.95 30.552615 15/16” 34.15 30.752616 1” 39.10 35.102617 11/16” 40.55 36.502618 11/8” 43.90 39.502620 11/4” 50.90 45.802621 15/16” 55.70 50.152623 17/16” 67.45 60.702624 11/2” 70.70 63.652626 15/8” 86.50 77.852627 111/16” 87.85 79.102629 113/16” 99.75 89.802630 17/8” 101.85 91.702632 2” 105.60 95.05

TOOLS&D•F®,

ORDER ON-LINE @ DYNAMICFASTENER.COM D•F is a registered trademark of Dynamic Fastener Service Inc.

#411/2 55/8” o/a Center Punch 1/2” Hex, Sharp Point

#963/8 10” o/a Drift Punch

3/8” Hex 3/16” Point

#155/8 16” o/a Aligning Punch 5/8” Hex 3/16” Point

1 to 5 6+ PRICE ANY MIX $ 7.15 $ 6.20

10.65 9.60

22.85 20.35

D•F PUNCHES

DESCRIPTION

PART # DESCRIPTION PRICEKL68222 7-Piece Ratcheting Box Wrench Set $155.00KL68245 5-Piece; Offset and Fully Reversible 104.00KL68242 3/4” x 7/8” Offset 29.409700* 7-piece Pivot Head Ratchet Combination 143.00 Wrench Set 3/8”, 7/16”, 1/2”, 9/16” 5/8”, 11/16”, 3/4”*GearWrench Brand

RATCHETING BOX

WRENCHES

12-PC PUNCH & CHISEL SETA professional punch and chisel set in a handy vinyl pouch.Contains:1/4”x43/4”x1/4” cold chisel, 3/8”x5”x5/16” cold chisel,1/2”x6”x3/8” cold chisel, 5/8”x61/2”x3/8” cold chisel,3/8”x5” center punch, 3/32”x43/4”x5/16” pin punch,1/8”x5”x5/16” pin punch, 5/32”x51/4”x5/16” pin punch,3/16”x51/2”x5/16” pin punch, 1/8”x8”x3/8” long taper punch, 3/16”x5”x3/8” starter punch, 1/8”x41/2”x5

16” starter.PART # DESCRIPTION PRICE

82305 Punch & chisel set $64.15

BULL PINS(Broad Head)

A special feature of these Bull Pins is their added resistance to “Mushrooming” from repeated pound-ing. Below the head, squared-off shoulders have been forged to provide a surface for applying a wrench to loosen wedged Bull Pins. Design of the head also reduces chance of pin slippage.

PART # TOP DIA. x POINT DIA. x LENGTH 1-5 6+

KL3255 11/4” x 5/16” x 13” $29.65 $26.95KL3256 11/16” x 1/4” x 10” 27.35 24.90KL3258* 13/16” x 7/16” x 12” 24.50 22.30AJ3269* 19/16” x 7/16” x 12” 93.60 85.20*Has a standard (straight) head, not broad as shown.

SCRATCH AWLSPART # DESCRIPTION PRICEKL650 Cushion Grip, 31/2” Blade, $14.10 7” O/A LengthKL66385 All Steel, 31/2” Blade, 14.60 7” O/A LengthKL650DD Demolition Awl, Metal Strike 19.45 Cap, 31/2” blade, 75/8” O/A Length

650

66385

650DD

PRY BARForged high carbon steel and heat treated for toughness. All three tools have cutting edges that are beveled and polished. All three tools are 13/4” wide. The Super Wonder Bar features a built-in leverage bump. (SL)

PART # DIMENSIONS PRICE55-045 7” Wonder Bar $ 5.8055-515 123/8” Wonder Bar 11.2555-525 159/16” Super Wonder Bar 14.35

55-515

55-525

BARREL-TYPEDRIFT PIN

Tapers are uniform and blend into body diameter. Tough, drop-forged steel, will properly end-pein in use.

PART # MAX. DIA. x POINT DIA. x O/A LENGTH PRICEKL3260 11/16” x 5/16” x 71/2” $ 8.20KL3261 13/16” x 7/16” x 8” 8.40KL3262 15/16” x 1/2” x 8” 9.60KL3263 11/16” x 9/16” x 8” 12.95AJ3264 13/16” x 3/4” x 8” 16.85AJ3265 15/16” x 3/4” x 8” 18.50

TORQUE WRENCHTighten bolts with this precision torque wrench. Accuracy within + or –3% and guaranteed to meet or exceed Federal Spec #GGW-00686. All parts, including shaft are heat treated, carbonized, quenched and twice tempered for long life and performance. Metric scale included and comes in a convenient blow molded case.PART # CAPACITY PRICE

9703B* 1/2” sq. dr. 30-250 ft. lbs. torque $99.95WE ALSO STOCK A 1/4” SQ. DR. 20-200 IN. LBS. FOR TORQUING SET SCREWS. PART #24320 $61.35

4-PIECE PRY BAR SETThis set provides all you need for positioning steel, prying or aligning holes.

PART # CONTENTS PRICE70758 5/8” x 16” Pry bar 3/4” x 24” Pry bar 1/2” x 15” Rolling head bar

$113 5/8” x 18” Rolling head bar

METAL WORKING TOOLS

CALL 800-821-5448 OR FAX 800-844-1199

WEB SLINGSWeb slings. Specify “Flat Eye” or “Twisted Eye”. Ultimate rated capacities for 2” wide 2-ply is: Vertical 6,400 lbs., choke 5,000 lbs., basket 12,800 lbs. Made by Safeway Sling with their top quality “Gold Standard Webbing.” Hot branded leather ID tag on each sling for traceability. Red core safety yarn warning signal. (WS)

TWISTED ORFLAT EYE PLY 1-5 6+

2” x 6’ 2 $23.30 $20.504” x 6’ 2 42.20 36.902” x 8’ 2 27.25 23.902” x 8’ 4 71.10 62.304” x 8’ 4 140.20 122.952” x 10’ 2 32.20 28.352” x 10’ 4 83.95 73.652” x 12’ 2 37.15 32.55

TWISTED ORFLAT EYE PLY 1-5 6+

2” x 12’ 4 $93.55 $87.554” x 12’ 2 76.30 65.904” x 12’ 4 183.95 160.952” x 16’ 2 46.95 41.253” x 16’ 2 75.85 66.802” x 20’ 2 56.95 49.954” x 20’ 2 110.85 97.554” x 20’ 4 269.95 238.70

WIRE ROPE SLINGSWire rope slings. Gold painted sleeves guarantees swagging is properly completed. Improved plow steel. Comprehensive ID tag for traceability. Ultimate rated capacities for 3/8”: vertical 1.4 tons, choker 1.1 tons, basket 2.9 tons; for 1/2”: vertical 2.5 tons, choker 1.9 tons and basket 5.1 tons. (WS)

SIZE 1-5 6+3/8” x 6’ $21.60 $18.953/8” x 8’ 24.60 21.653/8” x 10’ 27.65 24.353/8” x 12’ 30.70 26.95

SIZE 1-5 6+1/2” x 6’ $27.95 $24.601/2” x 8’ 31.85 27.901/2” x 10’ 35.90 31.651/2” x 12’ 40.15 34.75

HEAVY-DUTY BOTTLE JACKS

JHJ Series hydraulic bottle jacks function in upright, angled or horizontal positions for increased versatility. Precision machined and polished cylin-ders for a leak free durable performance. The piston and rams are chrome plated for additional corrosion resistance. JHJ series jacks comply with ANSI/ASME B30.1 and PALD-1 standards.

LOAD PISTON SHIPPINGPART # CAP.(TONS) LIFT (in.) WT. LBS. PRICE

453305 5 45/8” 9 $ 86.60453312 121/2 57/8” 18 134.45453322 221/2 61/4” 29 188.50

RATCHET TIE

DOWN STRAPS

Use to secure cargo on trucks, flat bed trailers or other restraint needs. Available in heavy duty 2” wide or medi-um duty 1” wide. (MP)

Hook Strap Strap Working 1-5 6+Part # Type Width Length Load Limit Price Price

10P27F Flat 2” 27’ 3,333 lbs. $23.75 $20.90

10P27FH J-Hook 2” 27’ 3,333 lbs. 23.75 20.90

22R16VS J-Hook 1” 16’ 1,000 lbs. 11.95 10.45

22R16VS

10P27FH

10P27F

CABLE PULLERGeneral purpose pullers designed to lift, lower or pull heavy loads. Features include 3/16” aircraft quality cable and drop forged hooks with safety latches. A concealed spring lever control prevents accidental release. Double solid cast aluminum ratchet wheel brake system holds load securely in any position. Load tested to 125% of capacity. Complies with ANSI/ASME B30.21 standards.

SNATCH BLOCKPART # CAPACITY LIFT INCLUDED PRICE

180410 1 ton 12’ No $47.50180420 2 ton 6’ Yes 50.80180440 4 ton 6’ Yes 71.10

The double pawl and grade 80 load chain increases hoist safety and durability. Alloy steel hooks rotate 360° for easy rigging. Load tested to 125% of capacity. Complies with OSHA Regulations, ANSI/ASME B30.21 and HST-3 stan-dards. *Model 104220 is a hand chain lift.

LOAD CAPACITY HEADROOMPART # (TONS) LIFT (INCHES) PRICE

187506 Mini 1/2 10’ 9.84 $180187607 3/4 10’ 12.80 263187609 3/4 20’ 12.80 291104220* 1 20’ 11.62 356187613 11/2 20’ 14.96 348187615 3 10’ 18.88 459

RATCHET LEVERHOIST

, SLINGS, TIE DOWNS, JACKS


SCREW PIN ANCHOR SHACKLESMade in the USA from forged carbon steel. Meets Federal Spec. RR-C-271D, Type IV. Size and working load limit permanently shown on every shackle. (WC) WORKING 1-49 50+PART # SIZE LOAD LIMIT* PRICE MIX/MATCH

5410605 3/8” 1 Ton $ 6.23 $ 5.595410705 7/16” 11/2 Ton 7.59 6.765410805 1/2” 2 Ton 8.28 7.375411005 5/8” 31/4 Ton 14.30 12.735411205 3/4” 43/4 Ton 21.42 19.05*Do not exceed working load limit

ROPE & TWINE

MINIMUM BREAK**Diameter LBS./CFT. RSWL* STRENGTH IN LBS. 100’ 600’

/4” 1.2 192 1,130 $ 4.95 $20.703/8” 2.8 414 2,440 9.95 43.751/2” 4.7 642 3,780 17.25 88.155/8” 7.5 952 5,600 119.953/4” 10.7 1,300 7,650 182.40

MINIMUM BREAK**Diameter LBS./CFT. RSWL* STRENGTH IN LBS. 100’ 600’

1/4” 2.0 54 540 $ 8.30 $ 29.503/8” 4.1 122 1,215 15.10 61.451/2” 7.5 264 2,385 25.50 115.60

LENGTH PRICE

WHITE #18 TWISTED 8 OZ. TUBE 500 FT. $4.50WHITE #18 BRAIDED 8 OZ. TUBE 500 FT. 4.95COLORS #18 BRAIDED 8 OZ. TUBE 500 FT. 4.95

* RECOMMENDED SAFE WORKING LOAD IN LBS.** MINIMUM BREAK STRENGTH IN LBS. FOR “NEW ROPE”

WARNING: DO NOT USE FOR OVERHEAD LIFTING

AIRCRAFT CABLE1x7 GALVANIZED CABLE

7x19 GALVANIZED CABLE

Diameter Weight Breaking Spool Length Price* (in.) (100 ft.) Strength in Feet Per ft.

1/4 13 4,750 1,000 $ .292 5/16 21 8,000 2,000 .420 3/8 28 10,800 1,000 .654 1/2 52 18,800 1,500 1.200

Diameter Weight Breaking Spool Length Price* (in.) (100 ft.) Strength in Feet Per ft.

3/8 25 14,400 500 $.618

DYNA

MIC FASTENER

HEAVY-DUTY CABLE SHEAR #63016 Cuts 1/4” mild steel or 3/16” aircraft cable. 71/2” long $86

CABLECLAMP

1-99 100+ 3/8” Galvanized Cable Clamp $.670 $.575

*PRICING IS FOR FULL SPOOLS ONLY. ALL OF THESE PRODUCTS ARE FOB HOUSTON, TX

MASONS LINE 100% NYLON SEINE

MANILA 3 STRAND TWISTED

POLY PROPYLENE 3 STRAND TWISTED SPOOLS AND MINI COILSUV STABILIZED

POLY-DACRON FALL PROTECTION ROPE. MEETS ANSI/OSHA SPECIFICATIONS MINIMUM BREAK**SIZE LBS./CFT. RSWL* STRENGTH IN LBS. PRICE5/8” X 600’ 9.5 1,804 7,214 $199.00

POLY PROPYLENE RED HOLLOW BRAID MINIMUM BREAK**SIZE LBS./CFT. STRENGTH IN LBS. PRICE1/4” X 1,000’ .5 1,000 $ 38.50

POLY-DACRON

RED HOLLOW BRAID

POLYPROPYLENEMANILA

MASONS LINEGreen, orange, pink or yellow

SHACKLES, WIRE CABLE, ROPE

CALL 800-821-5448 OR FAX 800-844-1199

PRICE 3+ PRICE$129

$119

GPL3 3-Beam GPL3 3-Beam• ±1/4” @ 100’ (6.4mm @ 30m) Accuracy, Interior Range 100’ (30m), Self-leveling

GLL3-330C Red GLL3-330C Red 3-Plane Laser 3-Plane Laser $399GLL3-330CG Green GLL3-330CG Green 3-Plane Laser 3-Plane Laser $549• ±3/32” @ 30’ (2.4mm @ 9m) Self-Leveling, Bluetooth connected, Dual Power 12V/4AA • 12V Battery, Charger, AA Adapter, Target, Positioning Device, Case

PLS 5R

PLS 3R

PLS180 1/8” @ 30’

PACIFIC LASERSYSTEMS

• Case, magnetic wall bracket

PLS6R 1/8” @ 30’• Case, AA batteries, Mag bracket, Floor stand, Target

1/4” @ 100’• Case, AA Batteries, Mag bracket, Floor stand, Target

1/8” @ 50’• Case, AA batteries, Mag bracket, floor stand, Pendulum target

$334

$366

$245

$429

The Professional Standard

$299

GLM400CL Laser Measure GLM400CL Laser Measure w/Adjustable Zoom Cameraw/Adjustable Zoom Camera• Up to ±1/16”, Range 400’, Bluetooth, 11 measure functions, Stores up to 600 images

RL25HCKRL25HCKSelf-LevelingSelf-Leveling• Level, Detector w/bracket, Tripod, Grade Rod ±3/32” @ 100’ (2.4mm @ 30m) accuracy 2000’ (610m) Range with Detector

$788

LEVEL-HEADED DECISIONLEVEL-HEADED DECISIONPERFORMANCE AND PRICE THAT ARE BOTH RIGHT ON.PERFORMANCE AND PRICE THAT ARE BOTH RIGHT ON.

$349AutoLevel KitsAutoLevel KitsGOL26CKGOL26CK• 1/16” @ 100’ (1.5mm @30m) Accuracy, 330’ (101m) Range

GPL5 5-BeamGPL5 5-Beam• ±1/4” @ 100’ (6.4mm @ 30m) Accuracy, Interior Range 100’ (30m), • Self-leveling, Includes Case, Multi-purpose Attachment

PRICE 3+ PRICE$249

$229

$199

GCL2-160 Cross-Line GCL2-160 Cross-Line w/Plumb Pointsw/Plumb Points• ±3/8” @ 100’, Range to 165’, Self leveling

PLS H2 Kit PLS 3G

1/4” @ 100’• Case, AA batteries, Mag bracket, Floor stand, Target, 3x’s brighter than typical red lasers

$318• Fully automatic self-leveling, horizontal red rotary laser • Case, rechargeable batteries, detector, target, 5/8-11 tripod and 16’ grade rod• Working range 1,000’

$1,300

PLS 480 System • Case, magnetic wall bracket, floor stand, universal tripod adapter and detector

$560

1/8” @ 60’

&

While supply lasts


ADJUSTABLE C-CLAMPSIrwin adjustable c-clamps feature a double-rolled thread for faster clamping and greater durability. The larger swivel pad reduces marring on the work surface and increases stability. Reduce hand fatigue and use less effort to clamp with the larger handle. (WT) SCREW TEST PRICEPART # OPENING DEPTH DIA. LOAD LB. 1-5 6+225102 2” 15/16” 3/8” 450 $ 3.20 $ 2.90225103 3” 21/4” 1/2” 900 6.55 5.95225104 4” 3” 9/16” 1350 8.95 8.15225106 6” 31/2” 5/8” 1350 15.15 13.60225108 8” 4” 3/4” 1575 24.35 22.15

Irwin I-Beam levels are made of aluminum in a pat-ented Dual Chamber design that resists twisting 2X more than traditional I-Beams. The MagnaVials™ are easy to read and Guaranteed Accurate for life to within .058°. Rare earth magnets grip metal 5X stronger than traditional strip magnets. (EL)


1794107 48” non-magnetic I-beam $42.301794108 48” magnetic I-beam 48.40

I-BEAM LEVELS

BOX BEAM LEVELS•Heavy-duty 6061 aircraft aluminum construction with shock absorbing end plates.•True Blue™ vials accurate to within .00050” in all working positions.•Large ergonomic eTread™ hand grips.•Milled edges to ensure accuracy and a 300° view top reading vial. (EL)

Made in U.S.A. and features Empire’s Pro Lifetime Warranty.PART # TYPE LENGTH PRICE

E75.24 Non-magnetic 24” $40.85E75.48 Non-magnetic 48” 55.80EM75.24 Magnetic 24” 46.70EM75.48 Magnetic 48” 69.95

RAFTER SQUAREHeavy-duty Magnum™ rafter square is made in the U.S.A. from solid extruded aluminum that will not bend, rust or corrode. Common rafter conversion tables are stamped in the face. The thick edge makes for a safer saw guide. (EL)2990 71/4” Rafter Square $9.45

TORPEDO LEVELThree torpedo levels are offered. 8” aluminum billet with magnet, V groove and VARI-PITCH™ vial that reads slope at 1/8”, 1/4”, 3/8” or 1/2” per foot of horizon-tal run. 9” aluminum/polycast frame with magnet and V groove. 9” polycast non-conductive frame with magnet. All read Plumb, level and 45°. (EL)

EM71.8 (pictured) 8” Billet Aluminum $19.95EM81.9 9” Aluminum 9.95331-9 9” Polycast 5.95

WORKSHOPVISE

H e a v y d u t y vises built with the best mate-rials to handle any job. (WT)

• Captured safety jaw to prevent slide from falling out• Swivel base• Aggressive replaceable steel jaws• Incorporated anvil

JAW JAW THROATPART # WIDTH CAPACITY DEPTH WEIGHT PRICE

226304 4” 41/4” 21/2” 24 LBS. $ 86.95226305 5” 61/2” 33/8” 39 131.00226306 6” 83/4” 33/8” 59 156.00

P/N 226304

Framing / Trim CarpentryPART # DESCRIPTION PRICE37416 16” with Handholes $ 60.0037424 24” with Handholes 80.0037448 48” with Handholes 130.00EL Case Polyethylene Case for 4’ Level 4.0037472 72” with Handholes 200.0037478 78” with Handholes 220.0037496 96” no Handholes 260.00MagneticPART # DESCRIPTION PRICE25100 Die-Cast Torpedo $ 50.0038616 16” no Handholes 70.0038624 24” no Handholes 90.0029924 48”, 24” & Torpedo Pro Set 150.0038648 48” with Handholes 150.00EL Case Polyethylene Case for 4’ Level 4.0038672 72” with Handholes 230.0038532 Jamber Set® 78” & 32” 280.0038696 96” no Handholes 280.00

IRWIN Box beam levels feature retractable end caps to allow for scribing into and through corners. The continuous edge protects the center vial and allows scribing along the entire length. The Plumb Site® offers dual sided undistorted viewing for easy accurate plumb readings. These are Guaranteed Accurate for life to within .029°. The rare earth magnets are 5X stronger than traditional strip mag-nets. (EL)


1794077 48” non-magnetic Box beam $67.751794078 48” magnetic Box beam 74.95

BOX BEAM LEVELS

I-BEAM LEVELS•Super strong anodized aluminum construction with shock absorbing end plates.•True Blue™ vials accurate to within .00050” in all working positions.•Milled edges to ensure accuracy and center vial has a top read. (EL)

Made in U.S.A. and features Empire’s Pro Lifetime Warranty.PART # TYPE LENGTH PRICE

E80.24 Non-magnetic 24” $19.95E80.48 Non-magnetic 48” 39.95E80.78 Non-magnetic 78” 59.95EM81.24 Magnetic 24” 24.95EM81.48 Magnetic 48” 49.95EM81.78 Magnetic 78” 84.9568-048 Case for 4’ level – 4.00

VISES, CLAMPS & LEVELS

CALL 800-821-5448 OR FAX 800-844-1199

Lumber Crayons and HolderStandard 1/2” hex shape crayon marks on metal, wood, concrete and more. Colors: black, blue, red, yellow and white. (MA)

12-132 144+Any one color (MA#200) $1.10/e 88¢/eCrayon holder with slide advance (MA#109) $9.98 each

King Size™ Marker

Specially formulated permanent ink marker even marks on damp and oily surfaces. The metal bar-rel and heavy-duty wool felt tip make it perfect for workshop or jobsite use. (MA#25)

1-11* 12-36 48+Black Marker $2.55/e $2.11/e $1.70/e*BROKEN BOX PRICE

Sharpie® markers feature a quick drying ink that is permanent on most hard surfaces. They are non-toxic, fade and water resistant. The Sharpie fine is the original pen style permanent marker. The twin tip increases functionality with both a fine and ultra fine tip. The metallic is perfect for marking on dark surfaces.

CTN. NO MIX PART # DESCRIPTION QTY. BROKEN CTN. CTN.

MA 35010-SH Sharpie Fine 36 $1.28/e $1.09/eMA 32174-SH Twin Tip 4 Pack 12 $9.10/pk $7.99/pk Black, Red, Blue, GreenMA 39108-PP Metallic 2 Pack 12 $3.80/pk $3.35/pk

Sharpie® Fine

Sharpie® Twin Tip

Sharpie® Metallic

Kynar® Paint Pen The Drexmet Paint Pen is the first of its kind in the industry and utilitizes a fluoropolymer (Kynar® 500) air dry system. This paint pen is a quick ’n easy solution to touch-up scratches on metal panels. It provides a very high quality result in an incredibly inexpensive form. No waste, no spillage, no brushes, no cleanup, no hassles, no problem! This paint pen will not precisely match the gloss of the paint finish that is factory installed. But it will provide the same Kynar® 500 paint quality. It provides great weatherability. It won’t chalk. It will fade along with your painted panels. It is the most eco-nomical and effective remedy for panel touch-up work on the market today. Available in all Drexel Metals stock colors except metallic paints. Six year shelf life if stored in mild temperature conditions. We stock every color that Drexel Metals offers. These are the 28 Drexmet colors available: bone white, regal white, terra cotta, colonial red, brilliance red, burgundy, pacific blue, deep blue sea, slate blue, aged copper, patina green, everglade moss, hem-lock, forest green, teal blue, hartford green, island blue, charcoal gray, slate gray, dove gray, sandstone, surrey beige, sierra tan, buckskin, medium bronze, dark bronze, mansard brown, matte black. We also stock MBCI lite stone. Usage 144 linear inches per pen. (PP)

12+ANY COLOR 1-11 ANY MIX

Kynar® Paint Pen $24.95 $23.65

Micro-fine for more marking power. Available in 6 colors: blue, red, yellow, white, black and fluores-cent orange. Plastic squeeze bottles. (IW)

8 Oz. 5 Lb. 1-23 24+ 1-3 4+

Blue, Red, Yellow, $1.75 $1.55 $11.55 $10.15Black or White Chalk

Fluorescent 3.24 2.67 19.23 16.72Orange Chalk

1-5 6+

100’ Chalk Line Reel 1932872 $ 6.99 $ 5.89100’ Fast reel (31/2:1 speed) 1932874 10.85 9.35100’ MACH 6 reel (6:1 speed) 17.44 14.43100’ replacement line 1.83 1.69

1932874

Carpenters Pencils and SharpenerMedium lead provides consistent lines and easy sharpening. 7” length.PART # DESCRIPTION 1-71 72+MA66300 Pencils 92¢/e 76¢/eMA233250 Sharpener $4.15 each

INKZALL® MarkerINKZALL® by Milwaukee writes on dusty, wet or oily surfaces. The durable fine tip writes on con-crete, OSB and rough surfaces. Features a handy built-in hard hat clip and non-toxic ink that dries in seconds.

CTN. FULL PART # DESCRIPTION QTY. BROKEN CTN. QTN.

48-22-3100 Black Marker 36 $1.89/e $1.60/e

1932872

KYNAR® PAINT PEN, CHALK & MARKERS

Permanent AP-certified oil based paint that resists water damage, fading and abrasion. Marks on metal, plastic, wood, glass, rub-ber & more. Colors: silver, black, blue, green, orange, red, yellow and white. (MAV) 1-11* 12-36 48+Any one color $3.30 $2.45 $2.25*BROKEN BOX PRICE


HANG-TYPE MAGNETIC SWEEPER Hang the magnetic sweeper from the forks on your fork truck or from the front bumper of your car or truck. An eyebolt is factory installed at each end of the sweeper to facilitate the hanging process. Maximum operating speed is 5 mph. Although the sweeper will pick up a 31/2” long 16 penny nail from 5” off the ground, it is recommended that the sweeper height should be set at 2” to 4” above the terrain. Use rope or chain to hang from a vehicle’s front bumper. Use a long rod run thru the eye-bolts to hang from a fork truck. The chain, rope, hanging rod, S-hooks are NOT included. This super powered, permanent magnet measures 5” wide and 13/4” deep. Two lengths are stocked: 36” long and 78” long. Pick-up capacity from a height of 2” for 8 penny nails is: 16.5 lbs. for the 36” magnet and 35.75 lbs. for the 78” magnet. There is no “release lever” to unload the collection of unwanted ferrous metal objects. To unload, one must wipe the magnet’s face with a heavy cloth. Shipping wt: 36” is 38 lbs. and 78” is 80 lbs. (WB)

36” – $247 78” – $435

MAGNETICPUSH TYPE SWEEPER

This heavy duty sweeper features an easy load-re-lease. To unload, simply push the sweeper to the desired dumping area (i.e. a piece of cardboard) and pull the lever. As the Magnet rises, collected material is released from the collector plate. This model will pick up 6 lbs. of 8-penny nails, approxi-mately 600 pieces. Use it to clear work sites and important traffic areas of dangerous scrap iron or scattered ferrous metal objects.

SPECIFICATIONS: 24” sweeping width, 120 sq. in. permanent magnetic sur-face area, 42” handle, 301/2” overall width, 40 lbs. shipping wt. (WB)

PART # SWEEPING WIDTH PRICE

WB DFSM24 24” $167

& MAGNETIC SWEEPERS

Bull Floats2 magnesium bull floats are stocked. A 4 rib that is “broken-in” and a multi-ribbed heavy duty version. Both are 48”x8” and include bracket. Order handle separately.


CC806 4 rib broke-in $112.00 floatCC802 Multi-rib heavy 114.00 duty floatCC236 13/4” x 6’ threaded 27.90 alum. handle

CC236

CC806

Magnesium FloatsCast magnesium blades are durable and offer superb floating action. The ends are beveled and corners are rounded for a “broke-in” feel.


CF150 MAG-150™ bevel end float $22.95 16” x 31/2” blade CF064 ThinLine Pro bevel end float 22.95 16” x 31/8” blade

CF150

Brick TrowelsPrecisely forged from high quality car-bon steel; tough, yet flexible. Handle is hard wood held in place with a steel ferrule.

PART # BLADE DESCRIPTION PRICE

GG432 5” x 2” Margin Trowel $14.95GG422 51/2” Pointing Trowel 14.95

Concrete FinishingTrowels

Cross ground blades with a high-s t reng th a luminum mount ing . Compression fit stainless steel riv-ets with oversized toe rivet add extra strength. Camel back wood handle.

PART # SIZE PRICE

CF217C 14” x 4” $26.15CF222C 16” x 4” 28.25CF227C 18” x 4” 30.85

Concrete FinishingBroom

Soft, plastic fibered, solid stock broom designed for the brushing down of soft, newly laid concrete surfaces. Bracket and handle not included. By Kraft.PART # DESCRIPTION PRICE

CC172 36” Broom $75.70CC266 6’ Handle 22.80CC494 Bracket 5.75

Concrete PlacerGrade, smooth and spread concrete with ease at the proper working angle. Made of 14 gauge steel – reinforced with blade length U-rib stiffening channel plus two full length stiffening breaks. 54” handle included.


CC019 191/2” x 4” Blade with hook $19.95

CALL 800-821-5448 OR FAX 800-844-1199

MODEL # DIMENSIONS CU. FT. WT. LBS. PRICE

1-652990 36x20x233/4” 8.3 103 $4321-653990 42x20x233/4” 9.3 150 4831-654990 48x24x273/4” 15.4 150 5931-655990 60x24x273/4” 19.3 182 7171-656990 48x30x333/8” 24.3 190 7181-658990 72x24x273/4” 23.2 205 815601040 4” CASTER SET 124602040 6” CASTER SET 139

BLACK ALUMINUMCROSSOVER

Fits full size Ford, Chevy, Dodge, GMC short and long wheelbase trucks, excluding Ford super-du-ty and F150 crew cab. Fits 8’ long bed full size Ford, Chevy, Dodge and GMC wide bed trucks, excluding Ford super-duty and F150 crew cab.

PART # DESCRIPTION CU. FT. WT. PRICE

JAC1387982 Full size/deep 10.7 75 $854 JAC1389982 Full size/deep/wide 17.5 97.5 940

ALUMINUM TOPSIDEHeavy gauge tread plate construction with 12” high reinforced doors.

PART # LENGTH CU. FT. WT. PRICE

572003 72” 9.4 69 $761573003 88” 11.5 81 816

ALUMINUM INNERSIDEFits all long and short wheelbase trucks.

PART # LENGTH CU. FT. WT. PRICE

JAN1444980 47” 2.9 36.5 $579JAN1445980 58” 3.6 41.5 614

651990

MODEL # DIMENSIONS CU. FT. WT. LBS. PRICE

1-681990 48x31x50” 38 286 $1,1171-682990 61x30x50” 47.5 334 1,1171-688990 60x30x38” 34.5 270 1,0641-689990 74x31x50” 56.5 430 1,383601040 4” CASTER SET 124602040 6” CASTER SET 139

Other “JOBOX” and “PAYLOAD PLUS” products that are currently stocked include:

MODEL # DESCRIPTION PRICE

651990 Utility chest 31” x 18” x 15.5” $398JSC1397980* Single lid cross over truck 599 box for compact trucks9810* Dual lid cross over truck 299 box for compact trucks

*Close-out, limited to stock on hand.

CHESTS

Site-Vault™ Locking mecha-nism requires only one padlock yet offers 50% more locking points. Forklift access from all four sides now.

PIANOBOXES

Si te -Vau l t™ Lock ing mechanism requires only one padlock yet offers 50% more locking points. Forklift access from all four sides now.

SLOPE LIDMODEL # DIMENSIONS CU. FT. WT. LBS. PRICE

1-680990 609/16x30x371/2” 32.7 330 $1,041601040 4” CASTER SET 124602040 6” CASTER SET 139

WELDERSTOOL CHEST

Made of heavy duty 16 gauge steel to last a lifetime. Features swing down side handles, padlock hasp and dura-ble textured powder paint finish. Can ship UPS.

DIMEN- CU. WT. MODEL # SIONS FT. LBS. PRICE

650990 30”x16”x12” 3.3 37 $184

LIFTING SOLUTIONSTEEL CHEST

Recessed lifting points. Added 12 ga. steel plate bottom reinforcement. Site-Vault™ security system with bolt cutter proof housing. JOBOX lifting sling assembly sold separately.PART # DIMENSIONS CU.FT. WT. PRICE

1-659990 48x24x273/4” 15.4 150 $90288000 6’ Sling Assy. N/A 54 807

MESH ROLLING CHESTS

See through mesh chests feature a commercial duty 3 point lock, 2 fixed and 2 swivel casters. 5 adjustable shelves with a rear lip to prevent slide of items. Shelves can hold up to 200 lbs each. Both chests are 33” wide and 55” tall.

WEIGHTPART # LENGTH CAPACITY WT. PRICE

1401990 591/2” 1,200 lbs. 328 $1,2891400990 75” 1,500 lbs. 375 1,643


Why pay list price at the hardware store

when you can SAVE OVER 40% on your

Master Locks from us?

New lower prices on Master Locks. The below prices are valid unless you are purchasing a specific key # that we do not carry and the pur-chase quantity is not a master carton. Orders for specific key #’s that are not a stocked item require a 15% upcharge and must be ordered in mul-tiples of 6. But there are not any pricing conditions if you are ordering a stocked item or if you are ordering a full case quantity.

Pro Series Weather Tough® (pictured above) features body and cylinder covers to protect from water, dirt and grime. Body width 2-1/8”.

Model #6121KA…$20.85/ePro Series High Security Locks (not pic-tured) feature a solid metal shroud to pro-tect against bolt cutters. Body width 2-1/8”.

Model #6321KA…$27.99/e

PART # 1KA 1KD 1LJKA 3KA 3KD 3LFKA 5KA 5KD 7KA 7KDBody Width 13/4” 13/4” 13/4” 11/2” 11/2” 11/2” 2” 2” 11/8” 11/8”Shackle Dia. 5/16” 5/16” 5/16” 9/32” 9/32” 9/32” 3/8” 3/8” 3/16” 3/16”Horizontal Shackle Clearance 3/4” 3/4” 3/4” 5/8” 5/8” 5/8” 15/16” 15/16” 1/2” 1/2”Vertical Shackle Clearance 15/16” 15/16” 21/2” 3/4” 3/4” 11/2” 1” 1” 9/16” 9/16”Keyed Alike? Yes No Yes Yes No Yes Yes No Yes NoCarton Quantity 24 24 24 24 24 24 24 24 24 24Less than Carton Qty. Price $11.25 $10.28 $13.88 $9.95 $8.95 $11.88 $14.05 $13.05 $8.08 $7.11Carton Qty. Price $9.89 $9.04 $11.77 $8.70 $7.87 $10.45 $12.35 $11.50 $7.12 $6.26

Also in stock is Master Lock’s Model #175. It is a resettable combination lock–makes remembering your combination easy. You program in any 4 digit combination from the 10,000 possible settings. Perfect for giving others temporary access. 2” body width. Solid brass case.

MODEL #175 ................................................................................................ $19.10

MAKE SADDLE TIESAND FIGURE EIGHTS WITH EASE

USING OUR POPULAR 16 GA. BLACK ANNEALED

TIE WIRE AND DOUBLE LOOP TIES

WIRE STOCKED IN31/2 LB. COILS

MOST DOUBLE LOOPTIES 5M ROLL

TYPICAL REBAR TIE SIZES

OTHER GAUGES AND COATINGS AVAILABLE ON REQUEST

NO. NO. NO. NO. NO. NO. NO. NO. NO. 2 3 4 5 6 7 8 9 10 5 5 5 6 6 8 8 8 8 5 5 6 6 8 8 8 8 10 6 6 6 8 8 8 8 10 10 8 8 8 8 8 8 10 10 10

SERIES 700This made in the U.S.A. solid steel body lock provides industrial security. The 5-pin cylinder is pick resistant and the case hardened body has a double-ball lock mechanism to resist pryout.

700 Keyed Different

1-23 pc. $29.80 24+ $26.95

700 Keyed Alike

1-23 pc. $30.50 24+ $27.60

REBAR NOM. SIZE DIA. 4 1/2” 5 5/8” 6 3/4” 7 7/8”

, , TIE-WIRES


NUT RUNNERS, TORX BITS, SOCKETS, FANS & HEATERS

30” COMMERCIALCIRCULATORPEDESTAL FANThis commercial grade air cir-culator features steel hub/spi-der aluminum paddle blades and coated steel guards with retaining clips. Comes with an SJT type 3 conductor, 9’ long cord and operates with a pull chain switch.

Pedestal pole adjusts center of fan from 43” to 60”. Meets OSHA standards. UL listed. 1-year limited warranty. Can ship UPS as an oversized package.

Specifications: 3-speed, 6000/5500/4800 CFM, 1/4 hp motor, 1-phase, 120V ball bearing, permanently lubricat-ed, open ventilated, perma-nent split capacitor. 66 lbs. shipping weight.

NO MIXPART # DESCRIPTION 1-2 3+

CACU 30P 30” Pedestal Fan $314 $282

COMBINATION RADIANT &FAN FORCEDHEATER

Specifications: 120V single phase, 5120 BTU’s max per hour, 6’ 3 conductor cord, temp control thermo-stat, safety systems; tip switch and over heat thermostat, dim 11”x15”x12”, 9 lbs. shipping wt.

NO MIXPART # DESCRIPTION 1-2 3+

198TMC Radiant & Fan $124 $111 Forced Heater

36” DIRECT DRIVE PORTABLE BLOWERPowder coated 20 ga. steel housing with spiral wire front and rear guards. 5” rubber wheels. Aluminum blades, rotary switch and SJT type - 3 conductor 10’ cord. Meets OSHA standards. UL listed. 1-year limited warranty.

Specifications: 2-speed 1/3 hp motor, single phase, 120V, ball bearing, open vented, permanently lubricated. 8200/7000 CFM, 70 lbs. shipping weight. NO MIXPART # DESCRIPTION 1-2 3+

CPB 36D 36” Direct Drive Fan $474 $427


SQ. 1-4 5+PART # DR. LENGTH PCS. INCLUDES PRICE PRICE

2650 1/2” STD 11/2” 13 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, $ 59 $ 52 15/16, 1, 11/16, 11/8, 11/4” sockets in plastic case2651 1/2” Deep 3” 13 Ditto above but deepwell & in a plastic case 96 862824 1/2” Deep 3” 24 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1,11/16, 11/8, 211 189 13/16, 11/4, 15/16, 13/8, 17/16, 11/2 sockets • 3”, 5” and 10” extensions and 1/2” universal joint in plastic case2845 1/2” Deep-XL 5” 5 1, 11/16, 11/8, 11/4, 15/16 175 1542848 1/2” Deep-XL 5” 8 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 199 1784681 3/4” Deep 33/8” 8 1,11/16, 11/8, 11/4, 15/16, 13/8, 17/16, 11/2 sockets 134 120 in plastic case4638 3/4” Deep 33/8” 14 3/4, 13/16, 7/8, 15/16, 1, 11/16, 11/8, 13/16, 11/4, 219 198 15/16, 13/8, 17/16, 11/2, 15/8 in plastic case5681 1” Deep 31/2” 8 7/8, 15/16, 1, 11/16, 11/8, 13/16, 11/4, 11/2” sockets 187 168 in plastic case

DEEPWELL AND STANDARDLENGTH IMPACT SOCKET SETS

2824

These square-drive socket sets are designed to withstand the extreme forces that are generated by high torque electric impact wrenches. Sockets are manufactured with high quality alloy steel (chrome-molybdenum) that meets or exceeds ASME specifications. The radius corners on the hex and square drive result in extended life and reduced wear on fasteners. All sockets are non-magnetic.

TORX BITSAll of our bit drivers for torx screws have a wedged end to bite into the torx screw.

CHOOSE DESCRIPTION 1-49 50 100

2D, 25, 27 or 30 1-5/16” Power drive $3.75 $3.35 $2.9525 or 30 2-3/4” Power drive 4.75 4.25 3.8530 1/4” Hex insert bit 1.70 1.55 1.4045 5/16” Hex NOT wedged insert bit 1.85 1.65 1.5045 5/16” Hex insert bit 3.25 2.85 2.50

Note: To install the T-30 selfdrilling screw, using a scrugun is preferred and recommended vs. an impact wrench.


MAGNETIC 1/4” 5/16” 3/8”LENGTH 10 100 10 100 10 100

1-3/4” $2.15 $1.50 $2.15 $1.50 $2.35 $1.65

2-9/16” 2.50 1.75 2.50 1.75 2.65 1.85

4” 3.85 2.70 3.85 2.70 4.15 2.90

6” 5.35 3.75 5.50 3.85 5.90 4.15

12” 13.20 9.25 15.65 11.00 16.85 11.85

NON-MAGNETIC 1/4” 5/16” 3/8” 10 100 10 100 10 100

$1.70 $1.20 $1.75 $1.20 $1.90 $1.35

2.00 1.40 2.00 1.40 2.20 1.55


We also stock these D•F® mag nut runners SIZE 10 100 7/16x1-3/4 $3.60 $2.55 1/2x1-3/4 4.50 3.00 9/16x1-3/4 5.20 3.60

TOOL BIT TIP PART # DRIVE HELD MAG? 1-9 10+

BH44M-3 1/4” Hex 1/4” Yes $4.95 $4.40BH85N-2 1/2” Sq Dr 5/16” No 5.25 4.70

BIT HOLDERS


CANVAS TOOLBAG

PART # PRICE

5102-24 $79.50

LEATHER BOTTOMBUCKET

#1 CANVAS, 100 LB. RATING12” DIAMETER X 17” HEIGHT

PART # PRICE

5104 $81.95

TOOL LANYARDSSee pg 137 bottom/left for more details about complete offering. LOAD NO MIX!PART # CAP CARABINER 1-9 10+

7AL 7 Alum $ 8.55 $ 7.5015AL 15 Alum 11.70 10.2515SS 15 S/S 18.50 16.2530SS 30 S/S 22.50 19.85

15AL15SS

TIE-WIRE REELRugged, lightweight reel feeds pre-coiled wire smoothly. 61/4” x 215/16” (See Pg. 123 for Tie-Wires).PART # PRICE

27400 $51.45

STRAIGHT-WALLBUCKET

#6 DUCK CANVAS. 12” DIAMETER X 15” HEIGHT

PART # PRICE

5109 $47.75

WRENCHHOLDER

PLEASE SPECIFY TUNNEL LOOPOR 2 SLOTS

PART # STYLE PRICE

5459T TUNNEL LOOP $19.955460 2 SLOTS 20.25

54605459T

BULL PINHOLDER

PLEASE SPECIFY TUNNEL LOOPOR 2 SLOTS

PART # STYLE PRICE

5417T TUNNEL LOOP $23.905417 2 SLOTS 18.90

54175417T

SNIP HOLDER(Snip not included)

Choose either Leather or ballistic NylonPART # PRICE

5858 $3.95

FLAME RESISTANTBOLT BAG

#4 CANVAS, TUNNEL LOOP FITS BELTS UP TO 3” WIDE

PART # PRICE

5416TFR $24.95

CANVAS BAG 4 PACK

Each pack contains 4 colors: Olive, Orange, Blue, & Yellow. Made in USA of rugged #10 canvas with a brass zipper. Use to store pliers, wrenches, screwdrivers, nut drivers and spare parts.PART # BAG DIMENSIONS PRICE

5140 12-1/2” x 7” x .7” $42.95

2” BELTSPART # SIZES BUCKLE MATERIAL PRICE

5705 Universal Quick Release Nylon Web $18.90 to 54” max Metal 5415(size) S,M,L or XL Double Prong Leather 33.75 XL add 10%

5415

5705

BULL PIN/BOLTBAGS

AVAILABLE IN CANVAS OR LEATHER.TUNNEL LOOPS OR 2 LOOPS

PART # STYLE PRICE

5416 2 LOOPS $19.855416T TUNNEL LOOPS 20.955416L DITTO BUT LEATHER 59.25

5416T

CANVAS WELD ROD BAG

#4 CANVAS, 21/2” DIAMETERX 151/2” BACK DEPTH

PART # PRICE

5471 $21.30

NAIL & TOOLPOUCH

RIGHT OR LEFT HAND

PART # PRICE

42245 (R) $40.2042246 (L) 40.20

42245

FRAMERS COMBOAPRON

19 POCKETAdjustable padded suspenders, 5” padded belt with double roller buckle and patented pouch handles.

PART # PRICE

DG5641 $78.25

ITEMS BELOW ARE WHILE SUPPLIES LAST


19449U 18 Pocket framers oiled apron $75.9519427 12 Pocket oiled work apron 49.95174274 12 Pocket work apron 29.95427 12 Pocket suede leather 23.25 work apron367 Gel Knee pads 19.255625U 5” padded belt S-L waist 19.95

LEATHER GOODS

CALL 800-821-5448 OR FAX 800-844-1199

Sqwincher®

The best at muscle preservation, isotoniccomposition, electrolytes and great taste!MAXIMUM HYDRATION: Liquids that are not isotonically formulated (like water) are absorbed into the bloodstream slowly so you do not get fully hydrated. Sqwincher is isotonically formulated to absorb quickly.BUILD AND KEEP STRONG MUSCLES: When you sweat you lose more than just water. Along with water you can lose magnesium, potassium, sodium and calcium. Sqwincher replaces all those and more, so you can keep your muscles and bones strong and healthy.ELECTROLYTE REPLACEMENT: Have you ever felt like you’d been run over by a truck after you were done exercising? That’s the feeling you get when you are low on electrolytes. Sqwincher replaces those missing electrolytes so you can keep your energy up.GREAT TASTE: With Sqwincher, you’ll never have to remind yourself to drink fluids. Great taste guarantees that you’ll stay hydrated because you enjoy what you are drinking. No more choking down drinks that taste like cough syrup because you have to.

QUIK STICK® Zero calorie turns a 20 oz. bottle of water into an individual serving of Sqwincher. Available in Orange, Fruit Punch, Mixed Berry, Lemonade, Grape, Raspberry, Peach Tea, Strawberry and Cool Citrus. (SQ) CASE 1-9 CASE 10-49 CASE 50+ CASEYIELD PACK MIX/MATCH MIX/MATCH MIX/MATCH

20 oz. 50 $26.54/cs $23.66/cs $20.79/cs SQWINCHER 23.83 oz. makes 21/2 gallons. Available in Cherry, Mixed Berry and a Variety pack (in full case only) containing Lemon-lime, Fruit Punch, Grape and Orange. (SQ)

CASE BROKEN 1-4 CASE 5+ CASEYIELD PACK CASE MIX/MATCH MIX/MATCH

21/2 Gal. 32 $4.93/pk $4.40/pk $3.87/pk

Two styles of Solo Cups are stocked. 1) Model #4R is 4 oz. cup with a rolled rim and 2) Model #156 is 6 oz. cup with rolled rim.

MODEL CUPS/ SLEEVES/ PRICE/ PRICE/NUMBER OZ. SLEEVE CASE SLEEVE CASE

IL4R 4 200 6 $6.95 $38.45IL156 6 200 12 11.50 122.25

SARGE GRUNT

Features a 21/2” partially serrated 440C stainless steel blade. Knife is 31/4” long closed. It is 51/2” open with 6061 Aircraft black aluminum handle, liner lock and pocket clip.

SARGE P/N LIST PRICE

SK800 $23.95 $21.55

SARGE MULTI-TOOLFeatures 14 tools and a safety tool lock/release mechanism for added protection. Anodized aluminum handle and 420 stan-less steel tools for durability. Tool folds to just 4.25” and comes with a black nylon pouch.

SARGE P/N DESCRIPTION PRICE

SKT50BK Multi-tool $25.95

COOLER ACCESSORIESA universal mounting bracket and universal cup dispenser are in stock to accommodate Gott water coolers. (RM)


8257 Cup dispenser for $15.15 4-6 oz. cups1640 Universal Bracket for 61.15 3-10 gal. coolers

SARGE PISTOLFeatures a 31/4” 440C stainless steel blade. Knife is 45/8” long closed. It is 77/8” open with a tex-tured pakkawood pistol grip han-dle, liner lock and pocket clip.


SK405 $20.95 $18.85

SARGE SHADOWFeatures a 31/2” 440 stainless steel blade. Knife is 43/8” long closed. With a swift assist opening it is 77/8” long. Includes a black nylon fiber handle, liner lock and pocket clip.


SK819 $24.95 $22.45

# PER PRICE BOUGHT INSIZE CASE /EACH CASE LOTS11 Oz. Smart 12 $ 9.95 $ 8.45 Straw1 Gal. 4 37.85 30.30Spray Applicator 4 6.20 5.15

COMMERCIAL COOLERS

These are not the cheap style of coolers that relies on air pockets as the provider of insulation. These coolers are manufactured with double wall high density polyethylene with urethane foam injected between the walls. Extra thick insulation will keep your drinks hot or cold. Fast flow faucet resists clogging. Meets OSHA requirements. (RM)

PART # COLOR CAPACITY PRICE

1683-01 Orange 3 gal. $34.451685-01 Orange 5 gal. 37.301610-01 Orange 10 gal. 74.50

1685-01


ANSI EN388 EN388 CASE CUT CUT PUNCTURE NO MIX NO MIXDESCRIPTION QTY LEVEL LEVEL LEVEL 12+ FULL CASE

A) Brown Jersey, Clute Pattern, Cotton Poly Blend, 8 oz. 300 - - - $ 1.03/pr $ .69/prBB) Thermal Glove, Latex Grip, Knit Wrist, Terry Liner 72 N/A 2 1 10.23/pr 8.52/prC) Welders Glove, Mig/Tig, Cowhide Lined 120 - - - 12.92/pr 11.50/prD) Leather Palm, Economy Grade, Denim Cuff, Denim Back 120 - - - 2.75/pr 2.42/prEE) Nitrile Disposable, Ambidextrous, Fish Scale Grip, 25 pair/box* 250 - - - 7.85/bx 6.99/bxF) General Duty Urethane Coated, Seamless Knit Nylon 300 A1 1 1 1.24/pr 1.10/prG) Drivers Gloves, Top Grain Cowhide, M/L/XL 120 - - - 7.64/pr 6.67/prH) Kevlar Cut/Puncture Resistant, PVC Dots 72 A3 N/A N/A 7.97/pr 7.16/pr I) Latex Coated Palm Cotton Glove 72 - - - 3.06/pr 2.75/prJ) Sheet Metal Gloves, Nitrile Coated Nylon 144 A1 1 1 4.45/pr 3.95/prK) Sheet Metal Gloves, Nitrile Coated Engineered Knit, Reinforced Thumb 72 A2 3 1 9.95/pr 8.25/prL) Sheet Metal Gloves, Nitrile Coated MAXICUT® Yarn, Reinforced Thumb 72 A2 3 1 10.55/pr 9.50/prM) Sheet Metal Gloves, Nitrile Coated Kevlar Blend 72 A3 4 1 16.95/pr 15.35/prNN) Sheet Metal Gloves, POLYKOR® Microsurface Nitrile Palm Coat 72 A5 N/A 2 10.45/pr 9.30/prOO) Sheet Metal Gloves, Micro-foam Nitrile Coat, MAXICUT® Yarn 72 A3 5 2 16.30/pr 14.25/pr*Sold in full box only ADD 25% FOR LESS THAN 12

WORK GLOVES

WATERLESS HAND WIPESPremoistened heavy duty towel that cleans and conditions your hands. Quickly removes: dirt, tar, paint, oils, urethane, grease, caulk, adhesives, sealants, epoxy, lubricants, ink & dye.75 - 101/2” x 121/4” towels per bucket. (MAS)

SHOP TOWELSTeri® reinforced wipes by Kimberly-Clark® are an ideal substitute for shop rags. More uniform than shop rags and less expensive than rental towels. Reinforced to withstand extra scrubbing.126 - 9.1” x 16.8” towels per dispenser box. 1-9 10+PART # DESCRIPTION PRICE PRICE

91371 Waterless Hand Wipes $20.55 18.2534790 Shop Towels 14.80 13.60

CUT RESISTANT PROTECTIVE SLEEVES

2-ply spun DYNEEMA®/Nylon blend sleeves for ANSI A3 cut protection. Offers unparalleled com-fort while providing cut and abrasion resistance. Elastic ends have a snug fit and prevent debris from entering.

Laundering extends the life. Wash in slightly warm water (104°F or less) on a 5-10 min. cycle. Hang dry.

PART # DESCRIPTION 12-132 PRICE* 144 PRICE*

20TG14 14” Gray Protective Sleeve $5.49 $4.4920TG18 18” Gray Protective Sleeve 5.99 4.99

*Price is per sleeve. Must buy in multiples of 12.

(BB)

HAND TOWELS, PROTECTIVE SLEEVES & WORK GLOVES

(A) (C) (D) (EE)

(F) (G) (H) (I) (J)

(K) (L) (M) (NN) (OO)

CALL 800-821-5448 OR FAX 800-844-1199

LED HEAD LIGHT – Super bright 120 lumen head lamp. Adjustable lamp, 3 light modes and adjustable strap. 3 AAA batteries included. (SE) DESCRIPTION 1-11 12+

H00692 Head lamp $8.95 $7.95

DISPOSABLE RESPIRATORS: Two types of respirators are stocked. Both meet NIOSH N95 and OSHA require-ments. Both feature an adjustable nose clip to reduce fogging and a secure fit. The valve version is ideal for eas-ier breathing in hot humid environments. Without valve is stocked 20 per box with 12 boxes to a case and valve has 10 per box with 12 boxes per case. (SE)

LESS BOX CASEPART # THAN BOX QTY. QTY.

10102481 without valve $1.54/e $1.16/e $.92/e 10102483 with valve 2.52/e 1.92/e 1.67/e

RESPIRATOR AND CARTRIDGES – Soft facepiece includes a unique “Hygiene Guard” for clean storage. Has an easy positive pressure seal check. APF 10 when properly fit tested and used with compatible filters and cartridges. Order facepiece and cartridge seperately. (MI)

ITEM DESCRIPTION 1-3 4+SWX386 Medium facepiece only $10.95/e $9.85/eSWX387 Large facepiece only $10.95/e $9.85/eSWX391 Multi-gas with P100, (Ammonia, Chlorine Dioxide, $26.30/pr $23.65/pr Formaldehyde, Hydrogen Sulfide, Methylamine, Organic Vapor, Sulfur Dioxide all particulates and more)SWX392 P100 Particulate, 99.97% filter efficiency. $9.25/pr $8.30/pr Effective against all solids and oil particulate Aerosols. Filter has hard outer shell.SWX395 P100 Pancake disc, 99.97% filter efficiency. $8.75/pr $7.85/pr Effective against all solids and oil particulate Aerosols. Filter has hard outer shell.

FR treated cotton, up to 30 washes, two layers - Cotton Twill/ Fleece. Detachable mouthpiece, ear barrier and ear warmer pockets. (SE) 12+PART # 1-11 NO MIX

364ML2FMP $11.95 $10.70

FR treated cotton, up to 30 washes, two layers - Cotton Twill/ Fleece, silver reflective strip on back. Shoulder length with wide wrapped collar and ear warmer pockets. (SE) 12+PART # 1-11 NO MIX

364SL2FB $11.60 $10.30

FR treated cotton, up to 30 washes, two layers - Cotton Twill/ Fleece. Mid length with ear barrier and ear warmer pockets. (SE) 12+PART # 1-11 NO MIX

364ML2FB $8.95 $7.95

PART # 1-11 12+

396800 $10.35 $9.10

EZ-COOL® HI-VIS hard hat visor and neck shade. Extended visor to block the sun from workers eyes and a drape to shade the neck. 100% polyester high visibility fab-ric with silver reflective tape. Elastic band ensures a secure fit to most hard hats. (SE)

V-Gard® Advance™ caps are vented to improve air circu-lation. They also have 6-point ratchet suspension, con-tours above ear for use with hearing protection and Glare Gard™ under brim to reduce reflective glare. Choice of white or yellow. (MI) 20+DESCRIPTION 1-19 NO MIX

Advance w/Ratchet $26.35 $23.70

V-Gard® caps by feature Fas-Trac® ratchet sus-pension. It has a large adjustment knob, adjustable nylon crown straps and a perforated vinyl sweat band that wipes clean easily. Choice of white or yellow. (MI) 20+DESCRIPTION 1-19 NO MIX

V-Gard w/Ratchet $20.80 $18.70

Starter Kits for the new hires on your crews. Kits include 6 point ratchet suspension Hard Hat, Hi Vis vest, wrap around safety glasses, ear plugs and cut resistant gloves. Choose kit with vest and gloves in Large or X-L vest and gloves. PART # 1-11 12+

SESKL $21.95 $19.75SESKXL 21.95 19.75

Vented EVOLUTION™ full brim hard hats have the most comfortable 6 point suspension and improve air circula-tion available. The wheel ratchet is easy to adjust for a firm comfortable fit. The CHAMLON™ sweatband has an Egyptian cotton core with a porous PU coating for maxi-mum sweat absorption. PH neutral and dermatologically tested. Choice of white or yellow. (SE) 10+DESCRIPTION 1-9 NO MIX

Vented Evolution™ w/wheel ratchet $18.45 $17.15

Two types of 6 point safety hats are available. Titanium™ is a nylon ratchet suspension available in white or yellow. Granite™ is a pinlock suspension available in white or red. Both come with a soft brow band that is washable and reusable. (SE) 12+DESCRIPTION 1-11 NO MIX

Granite™ $ 9.75 $8.75Titanium™ 10.60 9.55

TITANIUM™

SAFETY EQUIPMENT


SAFETY SPECTACLES: “Recon” from PIP features the ultimate anti-fog protection. Fogless® 3Sixty™ is integrated in the lens for the best anti-fog performance available. The rimless design features a base 9 curve and 99.9% UVA and UVB absorption. Meets ANSI Z87.1-2015. 12+RECON 1-11 NO MIXClear Lens $6.95 $6.15Smoke Lens 6.95 6.15

1-4 5-9 10+PART # BOXES BOXES BOXES

252-LCT100 $6.95 $6.35 $5.75

L E N S C L E A N I N G TOWELETTES: Pro-per lens cleaning will prolong the life of your safety glasses, gog-gles and shields. The anti-fog, anti-static for-mula is ideal for plastic, glass and polycarbonate lenses. 100 individual-ly pre-moistened tow-elettes per box. (SE)

EAR PLUGS: Resistor™ 32 ear plugs made in the USA by Radians are a slow-recovery polyurethane foam. They provide a noise reduction rating of 32 per ANSI S3.19-1974. (MI) BROKEN 1-9 10+ RESISTOR BOX BOXES BOXES

Uncorded $.17/pr. $.13/pr. .11/pr. Corded .35/pr. .27/pr. .23/pr.

SNUG PLUGS™ are made of a super soft FDA approved washable, reusable and non-toxic material. They provide a noise reduction rating of 28.

SNUG PLUGS™ 1-11 12-24 25-49 50+

Uncorded $ .96/pr. $ .87/pr. $ .79/pr. $.68/pr. Corded 1.21/pr. 1.14/pr. 1.04/pr. .90/pr.

SAFETY SPECTACLES: “Zenon 12™ Foam” by PIP are a rimless glass with foam padding around the edges to seal out dust and airborne particles. The 9.5 Base curve glass also features anti-scratch and anti-fog coatings. Meets Z87.1-2015. 12+ZENON 12 FOAM 1-11 NO MIXClear Lens $4.15 $3.65 Grey Lens 4.15 3.65 Indoor / Outdoor Lens 5.50 4.80

SAFETY SPECTACLES: “Zenon Z12™” by PIP has a relaxed bridge design to fit most users. Thin, flexible tem-ples add a secure fit with no pressure points. Meets ANSI Z87.1+9.5 base curve. (SG) 12+ZENON Z12 1-11 NO MIX

Clear Lens $1.55 $1.35 Smoke Lens 1.55 1.35 Indoor / Outdoor Lens 1.85 1.60 Silver Mirror Lens 1.85 1.60

HEADGEAR AND WINDOWS – We stock two varieties of head-gear and one variety of window. All comply with ANSI Z87.1 standards. The HG-400 features a ratchet suspension and is worn without a hard hat. The 5225 attaches to most hard hats. The V40815-CP is a clear Petg plastic window .040x8”x151/2”. Wear with spectacles or goggles. (SE)

12+PART # DESCRIPTION 1-11 NO MIX

HG-400 Ratchet headgear $ 7.60 $6.805225 Cap mount headgear 9.40 8.45102 Aluminum face shield frame 10.15 8.95V40815-CP Clear Petg face shield 2.85 2.50

SAFETY SPECTACLES: “Adversary™” by PIP is a wrap around glass with base-8 lens curve for added protection. Each glass includes an adjustable black sports cord. Provides 99.9% UV protection and meets ANSI Z87.1-2015. (SG) 12+ADVERSARY 1-11 NO MIX

Clear Lens $3.80 $3.40 Grey Lens 3.80 3.40 Indoor/Outdoor Lens 3.95 3.60Silver Mirror 3.95 3.60

SAFETY SPECTACLES: “Rad-Atac™” by Radians is a polycarbonate wrap around lens with integrated nose piece. Hinged rubber tipped temples provide a comfortable fit. Provides 99.9% UVA/UVB protection. Meets ANSI Z87.1 and CSA Z94.3 standards. 12+RAD-ATAC 1-11 NO MIX

Clear Lens $1.95 $1.80 Clear Anti-fog Lens 2.55 2.25 Smoke Lens 2.55 2.25 Indoor/Outdoor Lens 2.55 2.25Silver Mirror 2.75 2.40

SAFETY SPECTACLES: “24SEVEN” by Radians are ultra-lightweight for all day comfort. The single lens design offers additional coverage. Flexible temples further add to the comfort of these glasses. 99.9% UVA and UVB absorption. Meets ANSI Z87.1. 12+24SEVEN 1-11 NO MIX

Clear Lens $4.10 $3.65Smoke Lens 4.10 3.65 Indoor/Outdoor Lens 4.40 3.95Blue Mirror Lens 4.40 3.95

SAFETY SPECTACLES: “Apocalypse™” by Radians are sleek and sporty yet offer soft rubber temples. A handy neck cord is included. They meet ANSI Z87.1+ impact standards and provide 99.9% UV protection. (SG) 12+APOCALYPSE 1-11 NO MIXClear Lens $3.90 $3.50 Smoke Lens 4.30 3.85 Indoor / Outdoor Lens 4.30 3.85 Silver Mirror Lens 4.30 3.85

SAFETY SPECTACLES: “Commander” from PIP is a safety glass designed with style and fit for all day comfort. Bayonet style temples and non-slip rubber pads provide a secure fit. Provides 99.99% UVA and UVB light absorp-tion. Meets ANSI Z87.1-2015 9.5 base curve and CSA Z94.3. (SG) 10+COMMANDER 1-9 NO MIX

Clear Lens - Anti-scratch & Anti-fog $ 8.45 $7.45 Grey Lens - Anti-scratch & Anti-fog 8.45 7.45 Polarized Grey Lens - Anti-scratch 32.25 28.45

SAFETY SPECTACLES: “Mag Readers™” by PIP are bifocals available in 5 popular strength levels. Durable nylon frame with extra wide bridge pad and soft temple pads increase comfort. Meets ANSI Z87.1-2015 8 base curve. (SG) 12+MAG READERS STRENGTH 1-11 NO MIXClear Lens 1.0, 1.5, 2.0, 2.5, 3.0 $5.85 $5.35 Smoke Lens 1.0, 1.5, 2.0, 2.5, 3.0 5.85 5.35

CALL 800-821-5448 OR FAX 800-844-1199

SAFETY ITEMSSky Web II fall protection and

insulation support system is a light-weight, economical mesh system that provides passive fall protec-tion during construction and then keeps on working as an insula-tion support system after the job is finished.

The two and three quarter inch diamond nylon mesh is easily installed once structural members are in place providing leading edge protection so workers can move about freely over the mesh without the inconvenience and lost produc-tivity associated with tie-off systems that will still be required for work on the perimeter of the roof.

When the project is completed, the Sky Web II system remains in place, serving as an almost invisible insulation support system for the life of the building.

Sky Web II systems are cus-tom made to precisely fit almost any building configuration, and complete hardware and installation tools are supplied with each order.

To obtain a quote, please tell us 1) length and width of building 2) bay spacing and 3) roof pitch

Sky Web II™ is a trademark of Butler Manufacturing Co.

Sky WebII™

66+*1-51-5

$79.50 $8.25

$69.507.25

GRIPPERS SANDALEXTRA PADS

*Different sized sandals combine for price break. But different sized pads do not combine for price break.

IA5300FOR METAL ROOFS

provide much greater traction on metal roofs; including sur-faces that are oily, wet or even light frost covered. WARNING: Grippers do not take the place of or reduce the need for fall protection equipment.

will pay for themselves in short order by increasing work time, increasing worker mobility, reducing muscle tension and increasing comfort. Non-abrasive sole will not scratch or mar painted surfaces. The high quality sandal should be worn only while on the roof, keeping the soft foam sole away from dirt. Wear and longevity of the soft foam sole depends on a variety of factors including roof pitch, surface texture, moisture, exposed fasteners, user weight etc. Rates of deterioration can vary and pads should be replaced fre-quently. Walk on flat panel areas while avoiding panel ribs, seams and fasten-er heads. If your shoe size is 7 to 91/2, then order a medium; 10 to 111/2 is large; 12 to 131/2 is x-large; 14 to 15 is xx-large.

are a slip resistant sandal that provides much greater traction and easily fits over any type of work shoe or boot with instantly replaceable soles.

SAFETY FENCEThis orange safety fence is made from U.V. sta-bilized hi-density polyethylene with a service tem-perature of -22°F to 185F. Use as a visual barrier around construction job sites to delineate barriers, discourage entry or control access points. Sold in rolls 4’x100’ weighing 9 lbs. each. (SE)

PRICE PER ROLLDESCRIPTION SIZE 1-5 6+

Orange safety fence 4’x100’ $39.95 $35.95


SAFETY PRODUCTSPERSONAL

SAFETY LIGHT This is a L.E.D. light, not a strobe light. Therefore, this light will not interfere with lazer measuring devices on the jobsite as a strobe light can. This magnetic mounted battery powered light will eliminate the necessi-ty to hard wire to the battery or ignition switch which eliminates the chance of the light draining the battery of the equipment over night. Plus, you do not need to pay the rental company to install this required warning light on every (or any!) rental for job after job after job. Thereby, this item pays for itself on your first job! 300-400 hours of operation from 2 “D” batteries (not included). Amber. 60 triple flashes/minute. Photocell operation for night time use.

ECPSLM2-A Closeout Price $49.95

Alkaline “D” Battery $1.95 ea.

MISCELLANEOUSPART # DESCRIPTION PRICE

216097 Nitrile gloves 6 pr./pkg. $ 2.95450635 Nitrile gloves 50 pr./pkg. 13.95237010* Scissors 4” .65237015 Scissors 6” EMT style 3.95242005* Splinter remover 1.40*WHILE SUPPLIES LAST

ADHESIVE BANDAGESAdhesive that sticks and won’t hurt when removed. Stretches for comfort. (FA)


220202 Woven bandage 3/4”x3” 100/box $4.45220205 Woven bandage 1”x3” 100/box 5.15220213 Med. size fingertip bandage 50/box 5.55220220 Knuckle bandage 50/box 5.60

237010

Choice of 3 1st aid kits. All meet OSHA standards. A) P/N 28582 is economy grade appropriate for 8-10 people, plastic case no gasket B) P/N 28537 is appropriate for 20-25, plastic case with gasket C) P/N 28590 is appropriate for 40-50 people, plastic case with gasket. (FA)

KIT # USERS 1-11 12+

28582 8-10 People $18.65 $15.8528537 20-25 People 25.75 21.1528590 40-50 People 51.95 46.40

FIRST AID KITS

EYEWASHEye and skin wash for acid or alkalie burns. Stations are wall mountable and refillable. (FA)

STATION # DESCRIPTION PRICE611018 16 oz. 16”x12”x4” 2/box $21.95508016 4 oz. eyewash 3.60511017 1 oz. eyewash 2.95229018 Plastic eye cups 6/box 2.10

REFLECTIVE STRIPE & MAGNETIC TAPEEngineered reflective stripe tapes provide an extra margin of safety in blackout, night or low light situations. Weather resistant for indoor or outdoor use. Mark vehicles, jobsite equipment or any haz-ard where visibility is critical. Permanent adhesive back allows direct placement to most surfaces. 2” x 10 yd. rolls stocked in four strip combina-tions: Orange/White, Red/White, White/Black and Yellow/Black. Also offered is a 2” wide magnetic strip for temporary applications. Apply the striped hazard marking tape to the magnetic strip, apply mag-netic stripe to vehicle or metal surface and simply remove when done for later use on other equip-ment. (TA) 1-11 12+DESCRIPTION PRICE ANY MIX

Reflective stripe tape $22.20/roll $19.95/roll

1-5 6+DESCRIPTION PRICE ANY MIX

Magnetic tape .030”x2”x50’ $90.25/roll $81.35/roll

OSHA COMPLIANT BAR GUARD

• CAL-OSHA approval #C1718AG• Meets federal OSHA spec. #1926.701(b).• Designed to prevent impalement of a 250 lb. worker from a height of 71/2 ft.*• Fits rebar #3-#8. Once used on rebar greater than #6 positioning fins must be inspected for damage before re-use on rebar smaller than #6.• Contains a curved steel plate for additional pro tection against falls that occur from an angle.

*Protective covers are not allowed for fall distances in excess of 6 ft. Above 6 ft. fall restraint systems and protective railing is required.

PCS. BX WT./BX. 1-99 Pc. 100+**

SEBARGUARD 100 48 $1.86/e $1.55/e

**MUST BUY IN MULTIPLES OF 100

WhileSupplies

Last

CALL 800-821-5448 OR FAX 800-844-1199

NEWPREMIUM FULL BODY SAFETY HARNESS“PARAGON” vest style harness has full shoulder & upper back padding, padding at the waist belt & hips, all offering the wearer relief from pressure points. The PARAGON is the harness for the highly skilled & discriminating craftsman.

“PROFESSIONAL TRADES” full bodyharness has all the features & qualities thattop professional trades demand: heavy dutyback support positioning pad & adjustableshoulder pads; tongue buckle legskeep the harness adjustedexactly where it’s wanted.

Both models have a removable toolbelt to add your tools & bags.

PART # SIZE 1-5 6+DF159P-BK1 Small $189 $176DF159P-BK2 Medium 189 176DF159P-BK3 Large 189 176DF159P-BK4 Ex Large 189 176

PART # SIZE 1-5 6+DF129PT-1R Small $144 $134DF129PT-2R Medium 144 134DF129PT-3R Large 144 134DF129PT-4R Ex Large 144 134

FALL PROTECTIONLANYARD

6’ Lanyard with BUILT-IN D-ring extender.

Stretch legs that stay up and out of the way when not in use and loop top shock pack chokes onto the back D for lighter weight and less cost.

The large Surelock twist lock mechanism has a side gate open-ing of 1.87”.

PART # DESCRIPTION 1-5 6+DF22XLB11 Original Surelock $139 $129DF22XLB22 Large Surelock 162 151

All lanyards come with RetainerRing to velcro to your harness.

Also available with the original Surelock.

PART # DESCRIPTION 1-5 6+DF339TC-048 48” Cable $19 $18DF339TC-072 72” Cable 26 24DF339TC-096 96” Cable 36 34

TIE OFF CABLES

Tie Off Cables are vinyl coated galvanized steel cables. Resists cutting and heat (weld/arc) damage. Wrap any structural member able to withstand 5,000 lbs. for an instant anchorage. Vinyl coat also guards against abraiding the contact surface.

OSHA

COMPLIANT

SWIVEL GUARD

PICT PART # DESCRIPTION 1-5 6+A DF200LWEXT-12 12-15” Ext. w/Loop $20 $19B DF200WDEXT-18 18” Ext. w/Snap 28 26C DF230LR 18” Extender w/Loop 26 24D DF230DR 16” Extender w/Snap 41 38

PART # DESCRIPTION 1-5 6+DF390MS-B Swivel/Bolt $ 75 $ 70DF390MS-W Swivel/Weld 115 107DF390MS-C1 Swivel/Expansion 75 70DF390MS-C2 Swivel/Epoxy 87 81

10,000 lb. anchor point. Swivel ring design that allows the D-ring to rotate 360° as well as flip back & forth 180°. 4 options: Bolt thru or Weld for Steel, Expansion Bolt or Epoxy Rod for concrete. Permanent or Removable.

Replacement applications available when it’s time to move the Swivel to a new location or to the next job.

D-RING EXTENDERS

Back D-ring Extenders make it easier for a

worker to attach an SRL without assistance.

Shock Absorbing D-ring Extenders have the same easy connect and disconnect plus the additional shock absorber decreases forces of a fall.

PART # CAPACITY 1-5 6+ Any Mix7110100 1 gal./4 L Type I $ 46.40 $ 44.207125100 2.5 gal./9.5 L Type 1 52.85 51.157150100 5 gal./19L Type I 54.10 52.357150200* 5 gal./19 L Type I 67.10 64.957225120 2.5 gal./9.5 L Type II 104.90 99.907250130 5 gal./19 L Type II 108.85 103.4511202Y Type I pour funnel 8.70 8.30OSHA required, Safety Can Labels:Gasoline Label 21” x 6” 5.25 4.70Diesel Label 21” x 6” 5.25 4.70*DIESEL YELLOW

SAFETY CANS Type I safety cans feature a self-venting self-closing lid to prevent pressure buildup and spills. Built in stainless steel flame arrest-er stops flashback ignition while allowing a faster liquid flow. Type II safety cans feature a patent-ed AccuFlow™ Manifold that automatically vents for smooth, glug-free liquid flow. Safe-Squeeze® trigger offers maximum control when pouring. In addition a stainless steel flame arrester and 9” flexible hose are includ-ed. Both types meet the requirements of OSHA and NFPA, are FM approved, UL/ULC listed, Carb compliant and TUV certified.

Rechargeable fire extinguishers. Both have metal handles, vehicle brackets and are UL™ listed. These meet or exceed Class A&B requirements for light and ordinary occu-pancy as recommended by the National Fire Prevention Association. Rated for fires involving trash, wood, paper, liquids or electrical devices. (SEF)

EFFECTIVE RATED AGAINST SHIPPINGPART # SIZE CLASS WEIGHT 1-5 6+

466227-01 2.5 lb. ABC 4.2 lb. $68.20 $61.40466112-01 5 lb. ABC 8.5 lb. 89.80 80.80

A

B

C

D

Preferred for Quality and Practicality™Select Safety Products™Preferred by Craftsmen and Employers™

Preferred Safety Products, Inc.Steel and Metal Building Specialists






BEAMGUARD II™HORIZONTAL LIFELINE SYSTEM

PART # DESCRIPTION 1-5 6+DF357BG2-060 60’ System $1,259 $1,175DF357BG2-120 120’ System 1,933 1,795

Patent Pending

Easiest to install,easiest to use. Just likethe well-known original

market leader, Beamguard™

Designed by & for ironworkers.Shortest fall distance of any

comparable system.Complete 10’-60’ System with

2 posts and all cable &hardware.

No in-line shockabsorber needed.

Walk right to the post.

Also available in a 3 post system for up to 120’.

SWIVEL METAL ROOF ANCHOR

Made for metal deck & roof panels.

• Use with lifelines, rope/cable grabs or retractors.

• Temporary or Permanent application.

• Designed to fit in the valleys of lighter R panels and capture the purlin below.

• Unique design keeps the anchor point above the high point of the panels.

• Supplied with 14-14x11/2” T4 fasteners.

• Installer waterproofs to job specification.PART # DESCRIPTION 1-5 6+DF390RSA-01 Swivel Metal Roof Anchor $159 $148

V

V

V

V

V

V

Swivelsfull

360°

PART # DESCRIPTION 1-5 6+DF386ROOFWBG-01 Weld/Bolt 1 Tab Top $229 $214DF386ROOFWBP Weld/Bolt PassThru 229 214

PERMANENT ANCHORSHigh-strength steel anchors are 31/2” o.d. x 20” pipe base with clear zinc electroplate finish.

Meets all specifications for single fall protection anchor point or for use with any pre-engineered lifeline systems.

Base footprint is 51/2” x 51/2” and can be bolted or welded to steel.

The 387ROOF Anchor has a D-ring top.

The386ROOF Anchor has 6” shock absorbing tab tops for single direction or 4-tab for multi-directional pre-engineered horizontal lifeline.

PassThru top aids as an interior support for the lifeline and allows worker to slip the lanyard snap thru the curl without disconnecting from the lifeline (PassThru not for direct tie-off).

Patent Pending

PART # DESCRIPTION 1-5 6+DF415SSHL-060C 60’ Steel Cable $1,295 $1,195

STANDING SEAMHORIZONTAL LIFELINE

Pre-Engineered Standing Seam Horizontal Lifeline incorporates the DFSSRC-03. Steel Cable adjustable up to 60’.

All components included to instantly set up a horizontal life line on a standing seam roof.

PART # DESCRIPTION 1-5 6-9 10+

DFSSRC-03 2-Way, Butler MR24®/Butler VSR® & similar $219 $209 $198

STANDING SEAM ROOF CLAMP

Standing Seam Roof Clamp installs over clip on a completely seamed, attached roof section minimum 4 ft. or further from the edge with no damage to roof panels or finished seams and no roof penetrations. Unique “flip” design of the DFSSRC-03 allows for fit on both the Butler MR24®- and Butler VSR®-style seams just by removing the bolts, turning one side of the clamp around the ring and replacing the bolts.

Any roof that meets similar loadings, specifications, and codes of the Butler styles above will accept these anchors for safety tie off.

Clamps have been tested to meet and exceed the following OSHA standards1926.502 (d) (2), (3), (4) and (15): Anchorages for attachments of personal fall arrest equipment.

Unique “flip” design of the DFSSRC-03allows for seams up to 1” wide.

Configured forButler VSR®-style roof or equal

Configured forButler MR24®-style roof or equal

Patent Pending

MULTIPLE

WORKERS

VV180° + MOVEMENT

IN THE D-RING

1-Plate

PassThru4-Plate

D-Ring Top

PART # DESCRIPTION 1-5 6+DF386ROOFWBG-04 Weld/Bolt 4-Tab Top $320 $298DF387ROOFWBG Weld/Bolt D-Ring Top 264 246



CALL 800-821-5448 OR FAX 800-844-1199

SAFE-T LADDER™ EXTENSION SYSTEM• Meets all applicable OSHA & ANSI standards• Allows for safe & easy access to rooftops• Easily attaches to most standard extension ladders• Makes compliance with OSHA’s ladder regulation a snap. See PG 50 for for more info.


10800 Safe-T Ladder Call

* Almost 80% of all falls from ladders happen while entering and exiting around the top side of a ladder.

HALO RETRACTABLE LIFELINES

• Meets all applicable OSHA & ANSI standards• Compact and lightweight design• Quick action breaking system• Stainless steel and non-corrosive components• Sold with carabiner & tag line• 20’ thru 65’ units need recertification every 2 yrs.• All units have an impact indicator

10915

10917

HALO LEADING EDGE SRL’s

These four SRL’s meet ANSI Z359.14 for lead-ing edge (LE) use. These SRL’s have a built-in shock absorber. 3/16” cable with carabiner.

PART # “LE” SRL CABLE Price

10920 20’ Halo Call10925 30’ Halo Call10967 65’ Diablo Call10968 50’ Diablo Call

10968

PART # DESCRIPTION Price

10900 11’ Nylon Web Retractable Call10910 20’ Cable Retractable Call10912 25’ Cable Retractable Call10915 30’ Cable Retractable Call10917 50’ Cable Retractable Call10918 65’ Cable Retractable Call

BUCKET OF SAFE-TIECOMPLETE ROOFERS KIT

PART # DESCRIPTION Price00815 HUV, Temper, Call VLA 50’

ROPE GRABFits 5/8” or 1/2” diameter safety ropes. Locks automati-cally when a fall occurs.


01508 Rope Grab Call

ROOF CLAMP FORSTANDING SEAM METAL ROOFS

Designed to provide a tie-off point on standing seam metal roofs. It is adjustable to handle roof seams from 24” to 36” wide. Photo shows a S.R.L. But a S.R.L. is not included in price below. 6+PART # S.S.R.C. USED WITH: 1-5 ANY MIX

SSC351 Use with S.R.L. Under 50’ $235 $215SSC888XL Use with S.R.L. 50’ & Larger 325 298

T h e n e w D i a b l o Grande SRL features a 33’ cable lifeline, ergo-nomic handle, carabin-

er and swivel steel snaphook. It is available in standard galva-nized cable, nylon coated cable, leading edge and nylon coated leading edge. The nylon coated cable is ideal for painted metal decks to avoid roof scratches caused by a standard bare cable.

DIABLO GRANDE SRL


42009 33’ Galv cable Call42011 33’ Nylon Coated Galv Cable Call42010 33’ Leading Edge Call42012 33’ Nylon Coated Leading Edge Call

• Velocity Harness (01700)• Vertical Lifeline Assembly with shock pack and permanently attached positioning device with 18” lanyard extension to keep device within reach

• 1HD Temper Reusable Anchor (00455)


SERAPH HARNESSES

• 6 points of Adjustment

• ‘Quick-adjust’ torso buckles

• Stretchability

• Hammer Loops

• Web Keepers

• Tongue Buckle Leg Straps

11173


11164 HUV tongue buckle legs (M-L) Call11166 HUV tongue buckle legs (XL-XXL) Call11173 Construction side D-Rings (M-L) Call11171 Construction side D-Rings Call (XL-XXL)


01700 Pass through buckles (S-L) Call01701 Pass through buckles (XL-XXL) Call01703 Pass through chest and Call tongue buckle legs (S-L)01704 Pass through chest and tongue Call buckle legs (XL-XXL)

VELOCITY HARNESSES

• Break Away Lanyard Keepers

• Identification Label

• Finished Webbing Ends

• Webbing ‘Wear’ Indicator

1703

25’ POLY STEEL VERTICAL LIFELINE ASSEMBLY

The complete assembly includes: Shock absorber, positioning device, 18” extension lanyard, 2 double locking snap hooks & 25’ 5/8” dia poly steel rope. Resists cuts and abrasions.


01310 Vert. lifeline assembly Call

CB-12 & CB-18 ROOF ANCHOR• Permanent or temporary Anchor Point• For use on wood, steel or concrete• Universal base plate with galvanized finish• Round post works with most off-the-shelf flashing kits• Use with retractables or horizontal lifelines• 00680 Swivel top cradle installs on any “CB” anchor & accomodates most SRL’s up to 50’• 00604 Spanner plate required with; CB12 attaching to 22 gauge -or- CB18 attaching to 20 or 22 gauge decks

POSTPART # FOR USE ON LENGTH Price00604 Backer Plate - Call00645 Steel/Wood/Concr. 12” Call00656 Concrete 18” Call00657 Steel/Wood 18” Call00680 Cradle for SRL - Call

00680ATTACHED

TO CB

WARNING LINE SYSTEM• Meets all OSHA regulations• Totally portable, reusable and sets up in minutes• Flags are large, yellow and extremely durable

PART # DESCRIPTION 1-5 6+

SEDPFLAG 100’ Flag Line $ 19.95 $ 18.5015227 Single Stanchion Call

The Goose Warning Line Stanchion System is designed to be used as a fall protection system to protect work-ers from leading edge work, unprotect-ed side hazards, holes and any other applicable fall hazard where a passive Goose Warning Line Stanchion System can perform properly. Do not hang lifelines, support tools or any equipment from a Goose Warning Line Stanchion components.

HORIZONTAL LIFELINES

Pictured is the Web HLL 65’ lifeline. It features ease of set-up - no additional tools to tension. Built into ratchet system. All 3 units allow max of 2 workers tied-off to one-system - but see instruction manual first.

PART # DESCRIPTION Price04662 65’ Web HLL Call04639 60’ Kernmantle Call04640 100’ Kernmantle Call

Visua l t ens ion indicator so user does not need to measure slack.


00101 Beamer 2000™ $179 $164

BEAMER 2000™ BEAM CLAMP ANCHOR

• Weather resistant• Reusable• Lightweight• Fits 3.5”-14” beams• Slides easily in both directions• No tools or pins required

ANCHOR POINTS


00485 Screw down metal $ 98 $ 89 roof anchor. Accom- modates up to 50’ SRL “AS IS”

00691 4-Way plate anchor Call

00485Show with SRL. SRL

NOT included in price.

00691

CALL 800-821-5448 OR FAX 800-844-1199

CAUTION TAPETwo varieties of caution tape are stocked. 1) Shield- Gard® is our most popular and is 4.0 mils. thick or 2) DuraGard™ is a specially reinforced tape composed of a woven 4-ply structure 7.0 mils. thick and an amazing tensile strength of 500 lbs. per 3” width and is reusable. NOTE: a roll of ShieldGard is 3” x 1000’ and stocked in Yellow “Caution”. A Red “Danger Do Not Enter” is also stocked in 3.0 mils. A roll of Duragard™ is 3”x500’ and is stocked Yellow “Caution/Cuidado” or Red “Danger”. (SE)

DESCRIPTION SHIELDGARD DURAGARD

THICKNESS ASTM D/21-3 4.0 MILS. 7.0 MILS.TENSILE STRENGTH ASTM D882 5 LBS./INCH 167 LBS./INCH ELONGATION ASTM D882/75B 600-% @ BREAK 0.00% @ BREAK VIRGIN COMPOSITION LLDPE/LDPE WOVEN-HDPEROLL SIZE 3” x 1,000’ 3” x 500’PRICE PER ROLL (1-11 ROLLS) $19.55/e $24.75/ePRICE PER ROLL (12+ ROLLS) 16.95/e 20.75/e

Comply with OSHA warning line requirements when working on roofs. Our post is made of Hi-impact, UV resistant low density Polyethylene. It meets 39” tie-off height requirements and passes the 16# horizontal pull test. Stackable with or without base. The 100%

recycled rubber 30 lbs. base is 30” x 14”. Flag line meets 500 lb. tensile strength

requirements and contains 42 (11” wide x 17” long) flags at 14” spacing. Complies with OSHA 1926.502(f)(2)(ii) and (iii).

DELINEATOR POST & FLAG

LINEHeaviest

in the industry.30 lbs.base.

The most comfortable work shirt that you will ever wear. Both styles are 100% polyester Moisture Wicking Fabric for fast drying comfort. The non-compliant version is available in Hi-Vis orange or yellow and has a chest pocket. The ANSI compliant has 2” silver reflective tape, a grey collar that helps hide dirt, chest pocket and meets ANSI/ISEA 107 class 2. Available in Hi-Vis orange or yellow. Both stocked S-XXL. 3XL-4XL available by special order. (SV)

ANSI 107PART # STRIPING COMPLIANT 1-11* 12-35* 36+*

310CNTSN* No No $12.75 $11.50 $10.403121200* Yes Yes 16.20 14.50 13.15*Specify yellow or orange when ordering

LINED BOMBERS JACKETANSI 107 Class 3 compliant jacket. PU coated waterproof polyester shell and zip-out polyester fleece lining; zipper closure with storm flap and snaps; 2 external hand warmer pockets, 2 internal pockets, 1 radio pocket; 2” silver reflective tape; knit cuffs and waist. Stocked M-3XL, 4X-5X available by special order. Chest size: M-54”, L-56”, XL-59”, XXL-63”, 3XL-66”.

PART # DESCRIPTION PRICE3331762 Lined bombers jacket $50.70

SAFETYVESTS

SV2Z series economy vest meets ANSI class 2. Comfortable 100% polyester mesh with 2” silver reflective tape material, 1 upper left front pocket and 1 lower right inside pocket. Zippered closure.SV6 series surveyors vest meets ANSI class 2. Two tone 2” tape solid front/mesh back with zipper closure. Pockets included; 1 split pad/pencil, 1 radio, 2 lower flap covered, 2 deep inside pockets.Both are available in Hi-Viz green or Hi-Viz orange. Sizes M thru 5XL.The width across the chest when the vest is laid flat will be as follows by size; M-25”, L-26”, XL-28”, 2X-30”, 3X-32”, 4X-34”.

PART # 1-11 12-35 36+

SV2Z* $ 9.70 $ 8.75 $ 7.80SV6* 17.65 15.95 14.30*Specify size and green or orange when ordering

PRIVATE LOGOSAFETYVESTS

PROUDLY WEAR YOUR NAME. Having your com-pany logo screen printed on these vests is a simple and inexpensive process! The user has options deal-ing with: # of colors in logo, # of locations printed on a given vest and quantity of vests purchased.

Three example pricing of private labeled vests are below. Although many printing options exist for you to choose from, the following assumes 1-color and 1-position logo. Also, there is a $25 per logo per color set-up charge. That is charged on the first order ONLY. Any future re-orders using the exact same logo have a ZERO charge for set-up.

Add these printing costs below to price of vests (box to left) to calculate your cost for a private labeled vest. Example: 24 SV2Z private logo’d is $8.75 + 3.15 = $11.90/vest + one-time $25 set-up fee.

ADDITIONAL COST TO LOGO PER VEST 24-71 72-144 145-287

1-Color 1-Location Logo $3.15 $1.90 $1.25

SAFETY T-SHIRTS

SAFETY PRODUCTS

PRICE PRICE PRICEPART # DESCRIPTION 1-5 6-19 20+

SEDPCONE 39” Post with 30 lb. base $51.55 $47.40 $42.60SEDPFLAG 100’ Yellow pennant flag line 19.95 18.50 16.65



7400160 60’ Lifeline $950 $8857400047 Stanchion 320 2997400008 Bypass Kit 46 43

7400160SECURASPAN® HORIZONTAL LIFELINE SYSTEMEngineered system that islightweight, easy to install and safe• Extremely lightweight • Single clamp/wingnut design for fast attachment• Does not require tie-back • Add intermediates for unlimited length • Fits beam flanges up to 12” wide and 21/4” thick, options available to fit up to 36” flange.• Includes 2 stanchions, Zorbit energy absorber with turnbuckle.

TOOL LANYARDS These tool lanyards are designed to avoid dropped tools and the associated risk of personal injury. Made with either aluminum key chain carabiner (AL-K-C), stainless steel screw gate carabiner (S/S-S-G), or aluminum twist lock.

LOAD TYPE OF NO MIX!PART # CAPACITY CARABINER 1-9 10+

7AL* 7 AL-K-C $ 8.70 $ 7.6015AL* 15 AL-K-C 11.95 10.4515SS* 15 S/S-S-G 19.20 16.4530SS* 30 S/S-S-G 23.40 20.601500013** 35 N/A 21.95 20.201500050** 35 Twist Lock 38.95 35.85

TOOL TAPE WEIGHTFOR LANYARDS SIZE CAPACITY PRICE1500168 1” x 9’ 2 lbs. $21.95

*All elements and sub-assemblies meet or exceed ANSI Z359.1-2007. Full assemblies meet ANSI Z359.1. It attaches to a harness or belt.**Meets ANSI/ISEA 121-2018

7AL

15AL15SS

30SS


2104710 Glyder™2, fits 31/2”-14” $203 $189 wide up to 11/4” thick

2108406 Fixed Anchor, fits 21/2”-12” 399 375 wide up to 11/4” thick

1246167 Force2™ Lanyard, 6ft. 128 119

BEAM ANCHORS The Glyder™2 sliding beam anchor prov ides hor izonta l

mobility. Attach overhead or at your feet. The Force2™ lanyard must be used when attach-ing at your feet. It can handle up to a 12’ free fall. Fixed beam anchors can be mounted to the I-beam in any orientation or direction for added versatility. Both incorporate quick and easy adjustment as well as a 5,000 lb. strength.

*Beam anchors are available to accomodate bigger flanges.


2199803 “Compliance-in-a-Can” $128 $119

2199803 “COMPLIANCE IN A CAN”

Complete roofer’s fall protection kit• Kit complete with 5-point harness, rope grab, 50’ of lifeline and reusable roof anchor


7600506 60’ System $725 $6757600510 100’ System 740 690

7600506 SAYFLINE™ SYNTHETIC HORIZONTAL LIFELINE SYSTEM

• Extremely lightweight and portable system • Installs in seconds, no special tools needed • Synthetic system includes rope lifeline assembly with shock absorber, tensioning device, two tie-off adaptors to anchor the system and a storage bag • Up to two workers per system - regardless of length • Meets OSHA and ANSI - Other lengths avail.


1202794 50 ft. Lifeline $ 84 $ 781202844 100 ft. Lifeline 137 127CP600 5/8” x 600’ Bulk 199 192 Safety Rope, Bare Ends

1202794ROPE LIFELINE

Ideal for Rope Grab Systems

• 5/8” polyester/polypropylene blend rope• Snap hook at one end, taped at other • 50 foot length • Weight = 5.6 lbs.


5000335 Rope Grab $144.00 $134.001246012 3’ Lanyard 102.35 95.20

5000335LAD-SAF® ROPE GRAB

Hands-Free Mobile Type for use on 5/8” Lifeline

• Mobile hands free design automatically follows user• Inertia and cam locking systems for added safety• Energy absorbing design• Detachable, attach or remove anywhere along the lifeline• Durable but lightweight stainless steel and thermoplastic construction


1340005 Rope Adjuster $119 $111

1340005ROPE ADJUSTER LANYARD

Ideal for SlopedRoof Work orLeading EdgeFall Restraint

• Manual design allows user to fix unit in place for positioning or restraint• Attached 2’ shock absorbing lanyard• For use on 5/8” polyester/ polypropylene rope lifeline

1500013

1500168

1500050

CALL 800-821-5448 OR FAX 800-844-1199


1003000 3 ft. tie-off adapter $44.85 $41.751003006 6 ft. tie-off adapter 51.50 47.902000114 2” carabiner 79.50 74.002000113 13/16” carabiner 84.75 78.852000112 3/4” carabiner 44.85 41.75

ANCHORAGE CONNECTORS

Combines ease of use & high strength (5,000 lb. min.)

• Tie-off adaptor; 13/4” polyester with 3” wear pad, 3 ft. in length• Saflok® carabiners are self locking and closing for complete safety

Designed to provide fundemental fall protection with exceptional value.• Engineered for hard work, strong and durable.• Exceptional comfort, performance and fit• First by Protecta harness have 310 lbs. capacity• First by Protecta snap hooks do NOT meet 3600 # ANSI standard

PART # DESCRIPTION 1-5 6+AB17510 3-point Adj, back D, pass-thru legs $35.25 $32.80AB17520 3-point Adj, back/side D-rings, pass thru legs 42.90 39.90AB17550 5-point Adj, back D, tongue buckle legs 44.95 41.95AB17560 5-point Adj, back/side D-rings, tongue buckle legs 52.50 48.851341001 6’ shock absorbing lanyard, snap hooks 44.30 41.201340180 6’ 100% twin-leg shock absorbing lanyard, rebar hooks 83.50 77.601342001 6’ 100% twin-leg shock absorbing lanyard, snap hooks 55.90 52.005900578 6’ web strap choker anchor sling 25.40 23.60

• Suspension Trauma Strap helps prevent the effects of suspension trauma after a fall• Allows worker who is suspended to stand up in their harness to relieve pressure• A safety accessory that can be attached to most harness brands/styles right in the field.

TRAUMASTRAP


9501403 Trauma Strap $34.85 $32.40

1101655CONSTRUCTION VEST STYLE HARNESS

Belt & pad for added back support and tool carrying options.

• Tongue buckle legs• Spring loaded “stand-up” back D-ring• Belt with side D-rings• Sewn-in back pad and shoulder pads• Revolver™ vertical torso adjuster • Size: Large (XS-XL avail)• 420 lbs. capacity


1101654 size medium $181 $1691101655 size large (shown) 181 1691101656 size X-large 181 169

1102000VEST STYLE HARNESSLightweight design for maximum comfort and durability.• Tongue buckle leg straps• Spring loaded “stand-up” back D-ring• Parachute buckles on lower shoulder straps• Revolver™ vertical torso adjuster• Size: Universal• 420 lbs. capacityPART # DESCRIPTION 1-5 6+1102000 Shown $109.50 $101.851102008 with side D-rings 132.40 123.201103321 pass-thru leg straps 128.20 119.201103875 with side D-rings 148.85 138.401102001 parachute leg straps 128.95 119.951101828 with shoulder D-rings 142.75 132.80

The Most Comfortable and User Friendly Harness Ever Designed Includes ALL of the features of the original ExoFit PLUS the following;• Removable and washable padding• 3-D mesh wicks moisture keeping you cool • Spring loaded “stand-up” dorsal D-ring• “X” design for comfort & no-tangle donning• One-handed quick-connect buckles• Size: Small, Medium & Large Available• 420 lbs. capacity

PART # DESCRIPTION 1-5 6+1110101 XP, back D-ring (med) $299 $2821110102 1110101 but large size 299 2821110151 XP, back D-ring, body belt, pad with side D-rings (med) 362 3391110152 1110151 but size large 362 339

EXOFIT Revolutionary harness designed for maximum comfort & performance.

• One-handed quick-connect buckles• Moisture-wicking lining keeps you dry and comfortable• Custom edging is soft & prevents chafing• Built-in shoulder, back & leg padding provides comfort• Soft, lightweight mesh in back provides full ventilation• 5-point adjustment provides a custom fit for everybody• Size: Small, Medium & Large Available• 420 lbs. capacity

PART # DESCRIPTION 1-5 6+1107975 ExoFit™, back D-ring (small) $252 $2341107976 1107975 but size medium 252 2341107977 1107975 but size large 252 234

1108500 ExoFit™, back D-ring, body belt, 333 310

pad with side D-rings (small) 1108501 1108500 but size medium 333 3101108502 1108500 but size large 333 310

EXOFIT



3101366 Single Leg $264 $246 Connector3101374 Twin Leg Quick 499 465 Connector3101373 Twin Leg Fixed 499 465 D-Ring Connector

NANO-LOK™ TIE-BACK SRL’S• Compact and lightweight;

only 2.4 pounds• Versatile – use a

standard SRL or as tie-back for unrivaled jobsite flexibility and mobility

• Impressive 420 lbs. user capacity

• The 3 P/N’s below have 5,000 lbs. gated snap hook and 9’ lifeline

PART # LEGS HOOKS SRL’s 1-5 6+

3101228 Single 1: 3/4” 1 $170 $1593101280 Twin 2: 21/4” 2 414 385

NANO-LOK™ SELFRETRACTING LIFELINE

• At only 1.6 lbs, it is virtually unnoticeable on your back

• Whether your application requires single or twin leg configurations, mounting to an overhead anchor or for connection directly to a harness, there are more than 30 models to choose from to suit almost any application

• Nano-Lok™ stops quickly – stopping a fall within inches – providing more protec-tion at low heights. In addition, tension is always kept on the lifeline, which reduces dragging, snagging and trip falls. Both features are key safety improvements

• 420 lbs. weight capacity• 6’ lifeline

3504450ULTRA-LOK® SELFRETRACTING LIFELINEMinimal weight withpolyurethane housing• Corrosion resistant stainless steel components• Reserve lifeline system • Anti-ratcheting twin disc brake and audio indicator• 50 ft. of 3/16” galvanized cable, stainless steel avail• Self locking swivel hook with impact indicator• Limits forces to 900 lbs. or less


3504433 20 ft. galvanized $ 736 $ 6853504430 30 ft. galvanized 1,111 1,0353504450 50 ft. galvanized 1,118 1,040

3590540 10 ft. Protecta “LE” $ 521 $ 4853504500 30 ft. DBI “LE” 1,343 1,2503504600 55 ft. DBI “LE” 1,665 1,550

LEADING EDGE SRL’s

THERMOPLASTICHOUSING P/N LENGTH 1-5 6+

3590500 33’ $392 $3653590550 50’ 548 5103590590 66’ 885 8253590630 85’ 892 830

REBEL CABLESELF RETRACTINGLIFELINE• Lightweight, yet rugged thermoplastic housing. Aluminum housing is also available• Stainless steel working components• Capacity is 420 lbs. (total) of attached worker • No annual re-certifica- tion is required unless involved in a fall • 2-year warranty on parts and workmanship• 5mm (thicker than the standard 3/16”) galvanized wire cable priced below. • 5mm stainless cable also available

TALON™ WEB SELF RETRACTING LIFELINE Engineered for reliable protection that locks when it should; won’t lock when it shouldn’t!

• Extremely light weight design (only 3 lbs.)• 1” nylon web lifeline, 8 or 16 ft. length• Quick-connect handle eliminates the need for a separate carabiner (8 ft. model only). Swiveling anchorage loop prevents twisting/tangling of the lifeline (16 ft. model only)• Self locking hook with impact indicator

P/N DESCRIPTION 1-5 6+

3101000 8 ft. long $269 $2503101051 16 ft. long 321 299

REBEL™ WEB SELF RETRACTING LIFELINE

• Extremely light weight design (11 ft. model weighs only 2.8 lbs.)• 11 ft. or 20 ft. retractable line delivers the greatest working range for economy SRL’s• Best lifeline length-to- weight ratio • Unique super- strength thin webbing

P/N DESCRIPTION 1-5 6+

3100425 11 ft. with swivel $160 $149 and carabiner 3100431 20 ft. with carabiner 295 275


1244006 Shown $ 76.60 $ 71.251244024 21/4” hook one end 112.70 104.85

1224006EZ STOP® III SHOCK ABSORBING LANYARD

Lightweight one-piece design.

• 13/8” tubular web jacket and polyester core• Self locking snap hooks at each end• Limits forces to 900 lbs. or less• 6 ft. in length• Snap hook gates meet the 3600 # ANSI standard

1244412SHOCKWAVE2™ TWIN-LEG SHOCK ABSORBING LANYARD

Keep one leg attached to anchorage while other leg is ready to be hooked to the next.

• Expands to 6 ft. and contract to 41/2 ft.• Self locking snap hooks at center, 21/4” flat steel hooks at ends• Impact indicator• Limits forces to 900 lbs. or less• 6 ft. in length


1244306 Shown $ 86.90 $ 80.851244321 21/4” hook one 123.00 114.00


1244412 Shown $210 $1951244406 Snap hooks all ends 132 123

1244306SHOCKWAVE2™ SHOCK ABSORBING LANYARDExpands and retracts reducing trip fall hazards, dragging and snagging

• Expands to 6 ft. and contract to 41/2 ft.• Self locking snap hooks at ends• Impact indicator• Limits forces to 900 lbs. or less• 6 ft. in length• Snap hook gates meet the 3600 # ANSI standard

CALL 800-821-5448 OR FAX 800-844-1199 Order online @ www.dynamicfastener.com

2020© COPYRIGHT 2020 D.F.S.

www.dynamicfastener.com PRSRT BPMUS POSTAGE PAIDLIBERTY, MOPERMIT NO. 1123

CHANGE SERVICE REQUESTED

Dynamic Fastener Service, Inc.9911 E. 53rd St.Raytown, MO 64133

PRICE Call PAGE 22

20V Brushless Combo Kit.See top of pg 18 for a money saving offer.

DCK299P2

2799-22CXPO

M18 Brushless Combo Kit with

free Cooler,free 3rd Battery (5.0

A-H) & free40 Pcs Bit Set

PRICE $199 PAGE 28

2796-22PO

M18 Brushless Combo Kit with

free Rolling Pack-out, free Sawzall (2721), free 3rd Battery (5.0 A-H)

& free40 Pcs Bit Set

PRICE $399 PAGE 28

PRICE Call PAGE 23

PRICE $719 PAGE 14

DWE1622K2” MagPress

DCF887M2

20V Impacting Screwdriver Kit. See top of pg 18 for a money

saving offer.

DWV010

PRICE Call PAGE 26

$189 of FREE goods! $499 of FREEgoods!

Crazy blowout. Only 626 available.

Crazy blowout. Only 344 available.

Good while supply lasts. Crazy blowout. Only 378 available.

DCF880M2

20V 1/2” Sq Dr Impacting Wrench Kit. See top of pg 18 for a free offer.

PRICE $269 PAGE 20

Everything for the Metal Builder & Roofer C 2020 …...4” quick release hex drive, 2.8 lbs. tool...

Documents

Transcript of Everything for the Metal Builder & Roofer C 2020 …...4” quick release hex drive, 2.8 lbs. tool...