EuroStyle Design Ltd.Design Plan Build

Energy-Efficient Building Solutions Made Easy

•We will provide You with the most time, money and energy efficient solution for your building Project.•We will design and plan your project from initial consultation to permit.

THE DESIGN SOFTWARE

•We will provide you with energy efficient technology for your building:

THE BUILDING ENVELOPETHE WINDOWS

THE ROOFING SYSTEMDOMESTIC HOT WATER HEATERS AND HEATING SYSTEMS

THE DESIGN SOFTWARE

Chief Architect X1 The most advanced 3D Architectural Design & Drafting Software

available

Chief Architect uses parametric design technology.This means we create 3 dimensional models which are continuously updated as

we draw.

We customize door and window design as well as custom cabinets ,flooring and roofing.

We provide photo realistic renderings, room details and 3 dimensional walkthroughs.

Material list are always readily available.

The customer has access to design drawings with the Chief remote Viewer.It enables the customer to remotely view as well as annotate drawings.

THE BUILDING ENVELOPE

The Systems

The Processes

The Benefits

The Systems The ARXX© Wall and

Foundation system, Consisting of lightweight extruded polystyrene

blocks. Approved by the Canadian Green Build Council

Enforced with the designed engineered X-web.

The Arxx Wall and Foundation System

Standard Form Specifications

Length :48" (1219 mm) Height :16 ¾" Width: 4” Form 8” (200 mm)

6" Form 11 ½“ (292 mm) 8" Form 12 ½” (318 mm)

10" Form 14 & frac78” (378 mm)

The Arxx Wall and Foundation System

90° Corner Form Specifications

Length: 16” x 32” ( 406 x 813 mm) Height :16 ¾ “ (425 mm) Width : 4” Form: 8” (200 mm)

6” Form: 11 ½ ” (292 mm) 8” Form: 12 1/2 “ (318 mm)

10” Form: 14 &frac78” (378 mm)

The Arxx Wall and Foundation System Adjustable Corner Form

Specifications Length: 48” (1219 mm) Height: 16 ¾” ( 425mm) Width (6” only) : 11 ½” ( 292 mm)

The Arxx Wall and Foundation System Double 45° Corner

Form Specifications Length: 40” ( 1000 mm) Height: 16 ¾” ( 425 mm) Width: 6” Form: 11 ½” ( 292mm)

8” Form: 12 ½ ( 318 mm)

The Arxx Wall and Foundation System Extended Brick Ledge Form

Specifications Length: 48” (1219 mm) Height: 16 ¾” (425 mm) Width: 6” Form: 11 ½” ( 292mm)

8” Form: 12 ¼” ( 318mm)

The Arxx Wall and Foundation System Tapered Top Form

Specifications Length: 48” (1219 mm) Height: 16 ¾” ( 425 mm) Width: 6” Form: 11 ½” ( 292 mm)

The Arxx Wall and Foundation System End Cap Specifications Length: 2 ¼” ( 57 mm) Height: 16 ¾” ( 425 mm) Width: 4” Form: 4” (100mm)

6” Form: 6 ¼ (160 mm) 8” Form: 8” (200 mm) 10” Form: 10” (250 mm)

The Arxx Wall and Foundation System Height Adjuster

Specifications Length: 48” (1219 mm) Height: 3 &frac38” ( 89 mm) Width: 4” Form: 2” ( 50 mm)

All other: 2 ¼” (67 mm)

The Arxx Wall and Foundation System 12” high Form Specifications Length: 48” (1219 mm) Height: 12” ( 305 mm) Width: 6” Form: 11 ½ “ ( 292 mm)

8” Form: 12 ½” ( 318 mm)

The Arxx Wall and Foundation System The Bracing and Scaffold

System

The Processes The foundation strips or slap is

poured The forms are set Then connected with hooks and

ties. The special bracing and scaffolding

system aligns the walls. Rebar reinforcement is placed in

the forms and concrete is poured. 24 hours after pouring the floor

structure can be set on walls.

The Benefits The Strength Energy Efficiency Noise Transfer Reduction Ease of Installation Waste Reduction Interior and Exterior Finish Processes Less Man Hours

The Strength ARXX stay in place forms provide a

slow, moist cure which increases the strength of the concrete.

Fire Resistance is up to 4 times higher than conventional framing

Wind Resistance up to 150 Mph

The Strength

Energy and Sound Efficiency

The combination of up 5” expanded Polystyrene and 9 7/8” of reinforced concrete (10” forms) guarantees Insulation values up to R 50.

ARXX carries a sound reduction class (STC) of 50. Which means up to 4 times less sound transfer than wood frame construction

Energy and Sound Efficiency

Ease of Installation

Ease of Installation

Ease of Installation

Waste Reduction Due to the best fitting length

(4’) and the exact location of the cutting lines every inch, the amount of waist is reduced.

On a average size home 1 large garbage bag suffices for garbage removable

Interior and Exterior Finishing Processes Electricians Window installation Drywall Siding Stucco

Electric Installation Electricians just use head knifes or

small chainsaws with a guide wheel to lay their wiring as well as installing the electrical boxes.

No drilling of holes in Structural part of building necessary

Electric Installation

Window Installation Window installers work with

absolutely plain and square window openings, which are created with a non rotting window bucking system.

Interior Finish Dry walling is done with ease as

there is one solid surface to install the Dry wall sheets, and screws have to be placed only every 24”. Nail pops are virtually eliminated.

Vapour barrier does not have to be installed.

Interior Finish

Exterior Finish and Building Envelope

Due to the air tight nature of the ARXX wall system there is NO need of an Exterior building envelope.

Exterior Finish Stucco Installation

Siding Installation

Save Money Man Hour Savings:

Due to the ease of installation of the main structure as well as simplified finishing processes the amount of man hours saved in compares to conventional stick frame reaches up to 50% or more.

The crew needed to stand a average size residential home is three or less, depending on the time allotment.

The ARXX© wall system is the building system to be used if weather related delays are unacceptable.

Temperature changes are almost no influence to the material at all. The concrete needs fewer additives in cold weather as the product cures in a insulated environment

Cost Compares Item Conventional Home ARXX Home Comments

Building Costs $ 200.000 $ 208.00 4% more

Monthly Costs

Mortgage $ 1.119 $ 1.163 7.5 % interestTaxes $ 300 $ 312 15% tax rateInsurance $ 60 $ 48 20% savingsEnergy $ 145 $ 102 30% savings

Total monthly costs $1624 $1625 Cost only $ 1 more

The Systems Perfect Panel Wall Systems

The Panel The Floor and Roof Joists

Perfect Panel Wall Systems

The Panel This energy efficient, easily assembled wall

system saves time energy and money. Constructed using steel studs and EPS

(expanded polystyrene), these wall panels can be custom built for almost any application.

Perfect Panel Wall Systems The Metal Floor Joist Uniquely designed steel floor joists and small

roof trusses. All components are roll formed out of high

tensile galvanized steel. The components are assembled using TOX

technology. Each TOX button has 1259 pounds of shear

strength.

The Processes Savings in building materials and labor costs Our walls are designed to be easily installed,

reducing labor costs. The Slap or footings are poured The Panels arriving in pre-numbered 4’ sections

are erected The Panels are bolted and glued to the concrete

and screwed as well as glued to each other Joist and beams are inserted into special

designed pockets in the panel

The Benefits Savings in building materials and labor costs Our walls are designed to be easily installed,

reducing labor costs. Reduces noise levels as well as heating and

cooling costs The high R value of our wall panel system helps

cut down on noise travel in addition to providing excellent insulation.

Prevents insect infestation, mold and mildew Our panels are made of metal and EPS, both of

which cut down on insect infestation, mold and mildew.

The Benefits Up to 300% more energy efficient construction Energy efficiency was our top priority when we

designed our system. The walls have a true R30 value, much higher than traditional lumber construction.

Foundation and above grade panels are manufactured to engineered plans and specifications

Choose the pre-fabricated panels or Panels can be custom build to your specifications.

Supports building design that meets or exceeds wind load and building code requirements

The steel studs are inserted into the pre-cut EPS panels. This technology does not allow any bending or twisting of the metal stud, providing superior structural strength and stability.

The Benefits Pre-fabricated panel homes can be erected

quickly in a matter of hours The wall panels are designed to be easily

assembled. A home can be erected in a matter of hours, not weeks like traditional lumber construction.

Non-Combustible Both the steel studs and EPS Panels are non-

combustible, providing a safer home for you and your family.

THE WINDOWS We recommend DURABUILT windows. A Edmonton based window manufacturer

specialising in energy efficient Custom Made Windows.

Northlite (ICF) A window especially designed for ICF wall

systems

The Construction

Energy-Efficient Spacers

Energy-Efficient Glass

THE ROOF We recommend Interlock Industries Ltd.

Aluminum roofing system and installation services.

A Calgary based Company offering transferable lifetime warranty on their products

The Benefits Incredibly Strong Material

Aluminum has been proven to perform in tough weather conditions for over a century in all kinds of applications.

LightweightAt between 50 to 70 lbs. per square for the aluminum Interlock Roofing System, An Interlock Roof system is significantly lighter than any other conventional roofing products on the market today.

ToughAluminum keeps its toughness down to very low temperatures, without becoming brittle like carbon steels.

ReflectiveAluminum dissipates heat very quickly (taking foil out of the oven is a good example). Thus, your roof cools down quickly in the evening during the summer months.

The Benefits Recyclable

Aluminum is completely recyclable.. even the scrap produced on the job site is recycled.

DurableAluminum is highly resistant to weathering, even in industrial atmospheres, which often corrode other metals.

The Metal of Choice...- The Rolls Royce body panels are made from aluminum! - Boeing aircraft chassis are made from aluminum! - At the turn of the century Aluminum was used to cap the Washington Monument!

The Styles Interlock Slate

The Styles Interlock Tile

The Styles Interlock Shingle

The Styles Interlock Shakes

DOMESTIC HOT WATER and HEATING SYSTEMS We recommend uses VIESSMANN condensing

and non-condensing boilers for all energy efficient Heating and Domestic hot water needs.

VIESSMANN AG. A German company with a more than 60 year track record in Europe, Asia and North America with production facilities in Europe , Asia, USA, and Canada (Ontario).

The Condensing Boilers The Newest Energy-Efficient

heating and DHW technologie. These boilers are using the latent

Energy hidden in natural Gas and Propane to reach Efficiencies up to 98.9%

VITOGROSSAL 300 VITODENS 200

Vitogrossal 300

The Benefits

Vitodens 200 The Small Condensing Boiler for

individual Heating Needs (individually heated Apartments and House up to 3000 sq feet)

The Benefits

DHW Hot Water Tanks EuroStyleDesign uses VIESSMANN

vertical and horizontally placed stackable Hot Water Tanks.

These Hot water tanks are made out of Stainless Steel with Enamel coating.

Insulated with 2 ¼ “ PUR foam. VITOCELL 100 VITOCELL 300

Vitocell 100

Vitocell 300

SOLAR EuroStyleDesign uses VIESSMANN

Solar Technology The Ultimate in Environmental Friendly DHW The Ultimate in Environmental Friendly DHW

productionproduction VITOSOL 300VITOSOL 300 VITOSOL 100VITOSOL 100

Vitosol 300

Vitosol 100

The Bottom Line Using EuroStyleDesign and

the ARXX wall system will bring your project into the next century.

Your structure will stand the test of time for decades to come.

It will be saver. It will save you money. Your guest and tenants will notice

the difference.

The Bottom Line The initial cost of your project will be

higher than traditional stick frame, BUT EuroStyleDesign, the ARXX wall system, Windows, Roofs and Heating Systems used are not traditional.

We are using only the most energy and time efficient building materials and practices.

EuroStyleDesign Ltd.

Your One Stop Solution for your building Needs

Untraditional Solutions, for Untraditional Challenges