ENGINE DRIVEN BRUSH CHIPPER
Transcript of ENGINE DRIVEN BRUSH CHIPPER
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2131 Loader
Make & Model Morbark EEGER BEEVER 2131 Loader
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 21"
Weight 15,500#
Engine type, model, HP, etc.Caterpillar C7.1L, Tier 4F, 275-HP
diesel engine
Fuel tank size 60 Gallon
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5"
Trailer suspension type & capacity Torflex 20,000#
Trailer Brakes Electric
Trailer hitch type 2 - 1/2" pintle
Feed table length 57 7/6"
Distance from feed roller to ground 98 1/4"
Feed rate 110
Feed roller size and configuration 23-3/4" X 36" Horizontal
Chipper cutting wheel size 37-3/8" X 23-3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 102 3/8"
Chute rotation 360°
Hydraulic tank capacity 41 Gallon
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 133,447.60
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __________Morbark, LLC.___________________________________________
MAKE AND MODEL OFFERED:________Morbark Eeger Beever 2131-Loader________Qty Price Subtotal
Unit Base Price: 133,447.60 -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 6068HFC08, Tier 4F, 250-HP diesel engine 3,076.63$ -$
-$ -$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc. 112.46$ -$
Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Spare 235/75R x 17.5 tire and rim 854.62$ -$ Spare tire mount 269.88$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 854.62$ -$ Operator's platform and seat in lieu of standard ground mounted operator's controls 2,563.86$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Variable speed flow control 359.84$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.42$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Remote control: wireless, 900MHz with tethered back-up system (CONTROLS LOADER FUNCTIONS) in lieu of standard ground mounted operator's controls and includes M.I.C.S (Morbark Integrated Control System) located in the instrument panel 4,453.02$ -$ Bottom bump bar 1,776.72$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: $Weekly Rental Rate: $Monthly Rental Rate: $
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
3” lunet ring in lieu of standard 2-1/2" pintle ring
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2131 SA
Make & Model Morbark EEGER BEEVER 2131 SA
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 21"
Weight 11,000#
Engine type, model, HP, etc. GM 5.7L 165-hp gasoline
Fuel tank size 60 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5"
Trailer suspension type & capacity Torflex 10,000#
Trailer Brakes Electric
Trailer hitch type 2-1/2" pintle
Feed table length 57 7/16"
Distance from feed roller to ground 98 7/8"
Feed rate 110
Feed roller size and configuration 23-3/4" X 36" Horizontal
Chipper cutting wheel size 37 3/8" X 23 3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 101 1/8"
Chute rotation 360°
Hydraulic tank capacity 41 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 57,156.14
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __________Morbark, LLC.___________________________________________
MAKE AND MODEL OFFERED:________Morbark Eeger Beever 2131-SA_________Qty Price Subtotal
Unit Base Price: 57,156.14$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 4045HFC04, Tier 4F, 140-HP diesel engine 20,600.84$ -$ Caterpillar C4.4, Tier 4F, 147-HP diesel engine 19,588.80$ -$ John Deere 4045HFC06, Tier 4F, 173-HP diesel engine 22,557.48$ -$ Caterpillar C4.4, Tier 4F, 174-HP diesel engine 21,208.08$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc. 112.46$ -$
Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Spare 235/75R x 17.5 tire and rim 854.62$ -$ Spare tire mount 269.88$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 854.62$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic front stabilizer in lieu of standard 10,000# tongue jack 1,731.74$ -$ Hydraulic rear stabilizers (right hand and left hand) 3,306.04$ -$ Variable speed flow control 359.84$ -$ Hydraulic swivel discharge chute 854.62$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.42$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Rubber infeed curtain 269.88$ -$ Bottom bump bar 1,776.72$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
3” lunet ring in lieu of standard 2-1/2" pintle ring
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2131 Track
Make & Model Morbark EEGER BEEVER 2131 Track
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 21"
Weight 15,500#
Engine type, model, HP, etc.Caterpillar C7.1L, Tier 4F, 275-HP
diesel engine
Fuel tank size 60 Gallon
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires N/A
Trailer suspension type & capacity N/A
Trailer Brakes N/A
Trailer hitch type N/A
Feed table length 57-7/16"
Distance from feed roller to ground 103-7/16"
Feed rate 110
Feed roller size and configuration 23-3/4" X 36" Horizontal
Chipper cutting wheel size 37-3/8" X 23-3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 107-11/16"
Chute rotation 360°
Hydraulic tank capacity 44 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 128,477.52
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __________Morbark, LLC.___________________________________________
MAKE AND MODEL OFFERED:________Morbark Eeger Beever 2131-Track___________Qty Price Subtotal
Unit Base Price: 128,477.52 -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Caterpillar C7.1, Tier 4F, 225-HP diesel engine (3,788.70)$ -$ John Deere 6068HFC08, Tier 4F, 250-HP diesel engine in lieu of standard 3,076.63$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.
Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. Caterpillar 305E2CR undercarriage with 400mm steel tracks, 4.84 PSI ground pressure, low speed travel range of 90 FPM (1.0 MPH) and high speed travel range of 160 FPM (1.8 MPH) in lieu of standard rubber tracks 449.80$ -$
-$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic rear stabilizers (right hand and left hand) 3,306.04$ -$ Variable speed flow control 359.84$ -$ Hydraulic swivel discharge chute 854.62$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.42$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Rubber infeed curtain 269.88$ -$ Bottom bump bar 1,776.72$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: $Weekly Rental Rate: $Monthly Rental Rate: $
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
3” lunet ring in lieu of standard 2-1/2" pintle ring
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2131 TA
Make & Model Morbark EEGER BEEVER 2131 TA
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 21"
Weight 12,200#
Engine type, model, HP, etc. Caterpillar C4.4 TF 174-HP
Fuel tank size 60 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5
Trailer suspension type & capacity Torflex 16,000#
Trailer Brakes Electric
Trailer hitch type 2-1/2" pintle
Feed table length 57 7/16"
Distance from feed roller to ground 98 1/4"
Feed rate 110
Feed roller size and configuration 23-3/4" X 36" Horizontal
Chipper cutting wheel size 37 3/8" X 23 3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 102 3/8"
Chute rotation 360°
Hydraulic tank capacity 41 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 80,545.74
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __________Morbark, LLC.___________________________________________
MAKE AND MODEL OFFERED:________Morbark Eeger Beever 2131-TA___________Qty Price Subtotal
Unit Base Price: 80,545.74 -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 4045HFC06, Tier 4F, 173-HP diesel engine 1,349.40$ -$ Caterpillar C7.1, Tier 4F, 225-HP diesel engine 14,123.72$ -$ John Deere 6068HFC08, Tier 4F, 250-HP diesel engine 21,140.60$ -$ Caterpillar C7.1, Tier 4F, 275-HP diesel engine 18,063.97$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc. 112.46$ -$
Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Spare 235/75R x 17.5 tire and rim 854.62$ -$ Spare tire mount 269.88$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 854.62$ -$ Dual 10,000# rear jacks mounted roadside and curbside 787.16$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic rear stabilizers (right hand and left hand) 3,306.04$ -$ Variable speed flow control 359.84$ -$ Hydraulic swivel discharge chute 854.62$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.42$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Rubber infeed curtain 269.88$ -$ Bottom bump bar 1,776.72$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
3” lunet ring in lieu of standard 2-1/2" pintle ring
File: C796-03-2016
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Base Unit Price QuoteInformation Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2230 Loader
Make & Model Morbark EEGER BEEVER 2230 Loader
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 22"
Weight 14,700#
Engine type, model, HP, etc.Caterpillar C9.3B, Tier 4F, 335-HP
diesel engine
Fuel tank size 58 Gallon
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5"
Trailer suspension type & capacity Torflex 20,000#
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 54 15/16"
Distance from feed roller to ground 94 3/8"
Feed rate 115
Feed roller size and configuration 28 1/2" Horizontal
Chipper cutting wheel size 37-3/8" X 29-1/8"
Number of chipper knives 6
Knife description information A8 Modified double edged
Height of discharge chute 122-9/16"
Chute rotation 360°
Hydraulic tank capacity 45 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 204,805.12
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.1 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __Morbark, LLC___________________________________________________
MAKE AND MODEL OFFERED:___EEGER Beever 2230 Loader_________________________Qty Price Subtotal
Unit Base Price: 204,805.12$ -$
Spec No. Description Qty Price Subtotal
2.2.1ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with Flexxaire fan in lieu of standard 2,249.00$ -$ John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with Flexxaire fan in lieu of standard 4,722.90$ -$ Caterpillar C9.3B, Tier 4F, 415-HP diesel engine 4,722.90$ -$
2.2.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Rubber infeed curtain 269.88$ -$ Dual feed stops on infeed 607.24$ -$ Spare 235/75R x 17.5 tire and rim 854.62$ -$ Spare tire mount 269.88$ 18" bolt-on tongue extension 337.36$
2.2.3 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.5LB ABC fire extinguisher with mount 202.42$ -$ Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$
2.2.4 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc.Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$
-$
2.2.5 OTHER OPTIONS: Use this section to offer other options
Remote control: wireless, 900Mhz with tethered back-up system (CONTOLS LOADER FUNCTIONS) in lieu of standard ground mounted operator's controls 4,453.02$ -$ Operator's seat and platform in lieu of standard ground mounted operator's controls and includes M.I.C.S (Morbark Integrated Control System) located in the instrument panel 2,563.86$ -$
Total Cost: -$
2.2.6 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.2.7 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.2.8 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 475Weekly Rental Rate: 1200Monthly Rental Rate: 4200
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.2.9 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.2.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-03-2016
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Base Unit Price QuoteInformation Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2230 Track
Make & Model Morbark EEGER BEEVER 2230 Track
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 22"
Weight 14,700#
Engine type, model, HP, etc.Caterpillar C9.3B, Tier 4F, 335-HP
diesel engine
Fuel tank size 65 Gallon
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires N/A
Trailer suspension type & capacity N/A
Trailer Brakes N/A
Trailer hitch type 2 1/2" pintle
Feed table length 93-5/8"
Distance from feed roller to ground 142-5/8"
Feed rate 115
Feed roller size and configuration 28 1/2" Horizontal
Chipper cutting wheel size 37-3/8" X 28-1/2"
Number of chipper knives 6
Knife description information A8 Modified double edged
Height of discharge chute 127-5/8"
Chute rotation 360°
Hydraulic tank capacity 43 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 222,560
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.1 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __Morbark, LLC___________________________________________________
MAKE AND MODEL OFFERED:___EEGER Beever 2230 Loader_________________________Qty Price Subtotal
Unit Base Price: 222,560.00$ -$
Spec No. Description Qty Price Subtotal
2.2.1ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with Flexxaire fan in lieu of standard 2,249.00$ -$ John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with Flexxaire fan in lieu of standard 4,722.90$ -$ Caterpillar C9.3B, Tier 4F, 415-HP diesel engine 4,722.90$ -$
2.2.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Dual feed stops on infeed 607.24$ -$
2.2.3 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.5LB ABC fire extinguisher with mount 202.42$ -$
2.2.4 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc.
-$
2.2.5 OTHER OPTIONS: Use this section to offer other options
Total Cost: -$
2.2.6 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.2.7 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.2.8 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.2.9 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.2.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-03-2016
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Base Unit Price QuoteInformation Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 2230
Make & Model Morbark EEGER BEEVER 2230
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 22"
Weight 14,700#
Engine type, model, HP, etc.Caterpillar C9.3B, Tier 4F, 335-HP
diesel engine
Fuel tank size 65 Gallon
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5"
Trailer suspension type & capacity Torflex 20,000#
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 54 15/16"
Distance from feed roller to ground 94 3/8"
Feed rate 115
Feed roller size and configuration 28 1/2" Horizontal
Chipper cutting wheel size 37-3/8" X 29-1/8"
Number of chipper knives 6
Knife description information A8 Modified double edged
Height of discharge chute 122-9/16"
Chute rotation 360°
Hydraulic tank capacity 45 Gallons
Warranty 1 year complete
PRICE: 159,734.64
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.1 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __Morbark, LLC___________________________________________________
MAKE AND MODEL OFFERED:___EEGER Beever 2230__________________________________Qty Price Subtotal
Unit Base Price: 159,734.64$ -$
Spec No. Description Qty Price Subtotal
2.2.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 6090HFC09, Tier 4F, 350-HP diesel engine with Flexxaire fan 2,249.00$ John Deere 6090HFC09, Tier 4F, 400-HP diesel engine with Flexxaire fan 4,722.90$ Caterpillar C9.3B, Tier 4F, 415-HP diesel engine with Flexxaire reversing fan 4,722.90$
2.2.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Rubber infeed curtain 269.88$ -$ Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Spare 235/75R x 17.5 tire and rim 854.62$ -$ Spare tire mount 269.36$ -$ Dual 10,000# rear jacks mounted roadside and curbside 787.16$ -$ 18" bolt-on tongue extension 337.36$ -$
2.2.3 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic rear stabilizers (right hand and left hand) 3,306.04$ -$ Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Variable speed flow control 359.84$ -$
2.2.5 OTHER OPTIONS: Use this section to offer other optionsRemote control: wireless, 900Mhz with tethered back-up system, electric over hydraulic control bar actuator and emergency engine stop 5,105.24$ -$ 5LB ABC fire extinguisher with mount 202.42$ -$
Total Cost: -$
2.2.6 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.2.7 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.2.8 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.2.9 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.2.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1215
Make & Model EEGER BEEVER 1215
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 12"
Weight 4900
Engine type, model, HP, etc. PSI 2.4L 75 HP Gas Engine
Fuel tank size 24.5 Gallons
Battery size (CCA) 950
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/80R X 16"
Trailer suspension type & capacity Torflex 7,000#
Trailer Brakes Electric
Trailer hitch type 2 1/2 Pintle Ring
Feed table length 48 7/8"
Distance from feed roller to ground 91 1/2"
Feed rate 110
Feed roller size and configuration 18" Horizontal
Chipper cutting wheel size 14.2" X 21.4"
Number of chipper knives 2
Knife description information A8 Modified double edged
Height of discharge chute 105 11/16"
Chute rotation 360°
Hydraulic tank capacity 17 Gallons
Warranty 1 year complete
PRICE: $ 31,216.12
Morbark, LLCWayne Watts8507 S. Winn Road1000
Base Unit Price Quote
Winn, MI 48896(989) 866-2381(800) 831-0042(989) 866-2280
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: ______Morbark LLC_______________________________________
MAKE AND MODEL OFFERED:______________Morbark EEGER Beever 1215___________________Qty Price Subtotal
Unit Base Price: 31,216.12$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Kohler KDI 2504, Tier 4F, 74-HP diesel engine in lieu of standard 7,196.80$ -$ Caterpillar C3.4F,Tier 4F, 74-HP diesel engine in lieu of standard 7,646.60$ -$
-$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.2" ball hitch in lieu of standard 2-1/2" pintle ring 224.90$ -$ Amber strobe light 202.42$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,692.90$ -$ Spare 235/80R x 16" tire and rim 472.30$ -$ Spare tire mount 269.88$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.-$ -$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsChocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 539.76$ -$ Rubber infeed curtain 269.88$ -$ Bottom bump bar 1,776.72$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1415 Track
Make & Model Morbark EEGER BEEVER 1415 Track
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 14"
Weight 8500
Engine type, model, HP, etc.Caterpillar C3.4, Tier 4F, 122.5-HP
diesel engine
Fuel tank size 24 .5 Gallon
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires N/A
Trailer suspension type & capacity Cat 303.5 Track Undercarriage 300mm
Trailer Brakes N/A
Trailer hitch type N/A
Feed table length 48 7/8"
Distance from feed roller to ground 89 1/4"
Feed rate 110
Feed roller size and configurationTop 14 1/2" X 18" Bottom 14 1/2" X 9
1/2" Horizontal
Chipper cutting wheel size 21 3/8" X 14 1/2"
Number of chipper knives 2
Knife description information A8 Modified double edged
Height of discharge chute 86 5/16"
Chute rotation 360°
Hydraulic tank capacity 19 Gallon
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 79,992.43
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: ________Morbark LLC_____________________________________________
MAKE AND MODEL OFFERED:________Morbark EEGER BEEVER 1415 Track__________Qty Price Subtotal
Unit Base Price: 79,992.43$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.
-$ -$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Amber strobe light 202.42$ -$ Cone holder 224.90$ -$ Dual feed stops on infeed 607.24$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$
-$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Variable speed flow control 359.84$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other options
Rubber infeed curtain 269.88$ -$ Bottom bump bar 1,776.72$ -$
-$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: $Weekly Rental Rate: $Monthly Rental Rate: $
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1415
Make & Model Morbark EEGER BEEVER 1415
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 14"
Weight 5,500#
Engine type, model, HP, etc. PSI 2.4L 75hp Gasoline
Fuel tank size 24.5 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/80R X 16"
Trailer suspension type & capacity 7,000# Torflex
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle ring
Feed table length 48 7/8"
Distance from feed roller to ground 92"
Feed rate 110
Feed roller size and configurationTop 14 1/2" X 18" Bottom 14 1/2" X 9
1/2" Horizontal
Chipper cutting wheel size 14.5" X 21.4"
Number of chipper knives 2
Knife description information A8 Modified double edged
Height of discharge chute 104 3/8"
Chute rotation 360°
Hydraulic tank capacity 17 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 37,747.22
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: ______Morbark LLC_______________________________________
MAKE AND MODEL OFFERED:______________Morbark EEGER Beever 1415___________________Qty Price Subtotal
Unit Base Price: 37,747.22$ -$
Spec No. Description Qty Price Subtotal
2.3.1ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.PSI 4.3L, 145-HP gasoline engine with auto clutch 2,946.20$ -$ Kohler KDI 2504, Tier 4F, 74-HP diesel engine in lieu of standard 7,196.80$ -$ Caterpillar C3.4F,Tier 4F, 74-HP diesel engine in lieu of standard 7,871.50$ -$ Caterpillar C3.4, Tier 4F, 122.5-HP diesel engine 14,933.36$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.2" ball hitch in lieu of standard 2-1/2" pintle ring 224.90$ -$ Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$ Electronic fuel gauge located near control panel 179.92$ -$ Rubber infeed curtain 269.88$ -$
-$ 2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.
Variable speed flow control 359.84$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Bottom bump bar 1,776.72$ -$
-$ 2.3.6 OTHER OPTIONS: Use this section to offer other options
Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 539.76$ -$ Spare 235/80R x 16" tire and rim 472.30$ -$ Spare tire mount 269.88$ -$ Turnbuckle for discharge height adjustment 292.38$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-03-2016
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Base Unit Price QuoteInformation Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1418
Make & Model Morbark EEGER BEEVER 1418
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 14"
Weight 5,350#
Engine type, model, HP, etc.PSI 2.4L, 75-HP gasoline engine with
auto clutch
Fuel tank size 24.5 Gallons
Battery size (CCA) 950
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/80R X 16"
Trailer suspension type & capacity Torflex 7,000#
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle ring
Feed table length 54 7/16"
Distance from feed roller to ground 90 3/16"
Feed rate 115
Feed roller size and configuration 18" X 17 1/4"
Chipper cutting wheel size 37" X 2"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 103 5/8"
Chute rotation 360°
Hydraulic tank capacity 9 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 34,482.24
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.1 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __Morbark, LLC___________________________________________________
MAKE AND MODEL OFFERED:___Morbark EEGER Beever 1418___________________________Qty Price Subtotal
Unit Base Price: 34,482.24$ -$
Spec No. Description Qty Price Subtotal
2.2.1ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Kohler KDI 2504, Tier 4F, 74-HP diesel engine with auto clutch in lieu of standard 7,196.80$ Caterpillar C3.4F, Tier 4F, 74-HP diesel engine with auto clutch in lieu of standard 7,871.50$ Caterpillar C3.4, Tier 4F, 122.5-HP diesel engine in lieu of standard 14,933.36$
-$
2.2.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Rubber infeed curtain 269.88$ -$ Dual feed stops on infeed 607.24$ Chocks and chock holders (complete set of 2) 224.90$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ 2" ball hitch in lieu of standard 2-1/2" pintle ring 224.90$ Amber strobe light 202.42$
2.2.3 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Discharge with turnbuckle for height adjustment and bottom clean-out door in lieu of standard discharge 359.84$ -$
-$ -$
2.2.4 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc.Winch package 4,498.00$ -$ Reversing auto feed system only (no hydraulic lift assist) 899.60$ -$ Rubber infeed curtain 269.88$ -$ Variable speed flow control 359.84$ -$ Hydraulic lift assist only 854.62$ -$
2.2.5 OTHER OPTIONS: Use this section to offer other optionsChipSafe 3,620.90$ -$ Bottom Bump Bar 1,776.72$ -$
-$
Total Cost: -$
2.2.6 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.2.7 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.2.8 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.2.9 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.2.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 8941
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1621
Make & Model Morbark EEGER BEEVER 1621
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 16"
Weight 7,200#
Engine type, model, HP, etc. PSI 4.3L 145hp Gasoline
Fuel tank size 32 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 215/75R X 17.5"
Trailer suspension type & capacity Torflex 8,000#
Trailer Brakes Electric
Trailer hitch type 2-1/2" pintle
Feed table length 55 3/4"
Distance from feed roller to ground 94 1/2"
Feed rate 110
Feed roller size and configuration 20" X 18" Horizontal
Chipper cutting wheel size 21 3/8" X 23 3/4"
Number of chipper knives 2
Knife description information A8 Modified double edged
Height of discharge chute 96 13/16"
Chute rotation 360°
Hydraulic tank capacity 13 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 44,904.16
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: ________Morbark, LLC_______________________________________________
MAKE AND MODEL OFFERED:____Morbark EEGER Beever 1621_____________________Qty Price Subtotal
Unit Base Price: 44,904.16$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Caterpillar C3.4,Tier 4F, 122.5-HP diesel engine 11,604.84$ -$ John Deere 4045HFC04, Tier 4F, 140-HP diesel engine 21,581.40$ -$ Caterpillar C4.4, Tier 4F, 147-HP diesel engine 20,681.80$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.2" ball hitch in lieu of standard 2-1/2" pintle ring 224.90$ -$ 2-5/16” ball towing hitch in lieu of standard 2-1/2" pintle ring 224.90$ -$ Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Spare 215/75R x 17.5" tire and rim 719.68$ -$ Spare tire mount 269.88$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Chocks and chock holders (complete set of 2) 224.90$ -$ Hydraulic swivel discharge chute 854.62$ -$ Rubber infeed curtain 269.88$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.
Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Variable speed flow control 359.84$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBottom bump bar 1,776.72$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps $ 3,620.90 -$ Electronic fuel gauge located near control panel 179.92$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1821 Track
Make & Model Morbark EEGER BEEVER 1821 Track
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 18"
Weight 13,500#
Engine type, model, HP, etc. GM 5.7L 165-hp Gasoline
Fuel tank size 32 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires N/A
Trailer suspension type & capacityCaterpillar 305 Track Undercarriage
400mm
Trailer Brakes N/A
Trailer hitch type N/A
Feed table length 61 3/4"
Distance from feed roller to ground 102 3/4"
Feed rate 115
Feed roller size and configurationTop 20" X 18" Bottom 20" X 9 1/2"
Horizontal
Chipper cutting wheel size 30" X 23-3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 102 1/8"
Chute rotation 360°
Hydraulic tank capacity 27 Gallon
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 82,289.50
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: ___________Morbark, LLC____________________________
MAKE AND MODEL OFFERED:____________Morbark EEGER BEEVER 1821 Track___________Qty Price Subtotal
Unit Base Price: 82,289.50 -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 4045HFC04, Tier 4F, 140-HP diesel engine 21,581.40$ -$ Caterpillar C4.4, Tier 4F, 147-HP diesel engine 20,681.80$ -$ John Deere 4045HFC06, Tier 4F, 173-HP diesel engine 23,650.48$ -$ Caterpillar C4.4, Tier 4F, 174-HP diesel engine 22,391.04$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Electronic fuel gauge located near control panel 179.92$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. Caterpillar 305E2CR undercarriage with 400mm steel tracks, 4.84 PSI ground pressure, low speed travel range of 90 FPM (1.0 MPH) and high speed travel range of 160 FPM (1.8 MPH) in lieu of standard rubber tracks 449.80$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Rubber infeed curtain 269.88$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.42$ -$ Bottom bump bar 1,776.72$ -$ Super Trapp muffler (only available on gasoline engines) 301.37$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1821
Make & Model Morbark EEGER BEEVER 1821
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 18"
Weight 9,000#
Engine type, model, HP, etc. PSI 4.3L 145-hp Gasoline
Fuel tank size 32 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5"
Trailer suspension type & capacity Torflex 9,000#
Trailer Brakes Electric
Trailer hitch type 2-1/2" pintle
Feed table length 61 3/4"
Distance from feed roller to ground 125 3/8"
Feed rate 115
Feed roller size and configurationTop 20" X 18" Bottom 20" X 9 1/2"
Horizontal
Chipper cutting wheel size 30" X 23 3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 101 3/4"
Chute rotation 360°
Hydraulic tank capacity 12 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 50,578.60
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __________Morbark LLC___________________________________________
MAKE AND MODEL OFFERED:_______EEGER BEEVER 1821______________________________Qty Price Subtotal
Unit Base Price: 50,578.60$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.GM 5.7L, 165-HP gasoline engine 2,689.80$ -$ John Deere 4045HFC04, Tier 4F, 140-HP diesel engine 21,581.40$ -$ Caterpillar C4.4, Tier 4F, 147-HP diesel engine 20,681.80$ -$ John Deere 4045HFC06, Tier 4F, 173-HP diesel engine 23,650.48$ -$ Caterpillar C4.4, Tier 4F, 174-HP diesel engine 22,391.04$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc. 112.46$ -$
Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 854.62$ -$
-$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic front stabilizer in lieu of standard 10,000# tongue jack 1,731.74$ -$ Hydraulic rear stabilizers (right hand and left hand) 3,306.04$ -$ Variable speed flow control 359.84$ -$ Hydraulic swivel discharge chute 854.62$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.42$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.90$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Rubber infeed curtain 269.88$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
3” lunet ring in lieu of standard 2-1/2" pintle ring
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Morbark EEGER BEEVER 1922
Make & Model Morbark EEGER BEEVER 1922
Is the Engine Tier IV Compliant (Yes/No) Yes where indicated
Chipper inch capacity 19"
Weight 9,550-11,500 #
Engine type, model, HP, etc. GM 5.7L 165-hp gasoline
Fuel tank size 44 Gallons
Battery size (CCA) 1400
Instrumentation Multifunction Electric Control Panel
Trailer tires 235/75R X 17.5"
Trailer suspension type & capacity Torflex 10,000#
Trailer Brakes Electric
Trailer hitch type 2-1/2" Pintle
Feed table length 56"
Distance from feed roller to ground 89 3/16"
Feed rate 110
Feed roller size and configuration 29 1/2" Horizontal
Chipper cutting wheel size 37-1/2" X 23-3/4"
Number of chipper knives 4
Knife description information A8 Modified double edged
Height of discharge chute 103 7/16"
Chute rotation 360°
Hydraulic tank capacity 26 Gallons
Warranty1 year complete with 2nd year on
Morbark components only
PRICE: 57,017.90
Base Unit Price Quote
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896(989) 866-2381(800) 831-0042(989) [email protected]
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: __________Morbark, LLC.___________________________________________
MAKE AND MODEL OFFERED:________Morbark Eeger Beever 1922___________Qty Price Subtotal
Unit Base Price: 57,017.90 -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.John Deere 4045HFC04, Tier 4F, 140-HP diesel engine 20,600.84$ -$ Caterpillar C4.4, Tier 4F, 147-HP diesel engine 19,588.79$ -$ John Deere 4045HFC06, Tier 4F, 173-HP diesel engine in lieu of standard 22,557.47$ -$ Caterpillar C4.4, Tier 4F, 174-HP diesel engine in lieu of standard 21,208.07$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc. 112.46$ -$
Amber strobe light 202.42$ -$ Dual feed stops on infeed 607.24$ -$ Spare 235/75R x 17.5 tire and rim 854.62$ -$ Spare tire mount 269.88$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Chocks and chock holders (complete set of 2) 224.90$ -$ Cone holder, lockable to hold (10) 28" long traffic cones 224.90$ -$ Folding infeed tray (1500 mm) with spring lift assist 854.62$ -$
-$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic front stabilizer in lieu of standard 10,000# tongue jack 1,731.73$ -$ Hydraulic rear stabilizers (right hand and left hand) 3,306.03$ -$ Variable speed flow control 359.84$ -$ Hydraulic swivel discharge chute 854.62$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options5LB ABC fire extinguisher with mount 202.41$ -$ ChipSafe® Operators Safety Shield includes (2) sets of wrist straps, (2) sets of ankle straps & (2) sets of boot straps 3,620.89$ -$ Winch package: heavy-duty, 5000# pull capacity with rope and 10' chafe guard 4,498.00$ -$ Rubber infeed curtain 269.88$ -$ Bottom bump bar 1,776.71$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: 375Weekly Rental Rate: 1050Monthly Rental Rate: 3100
Percent (%) of Rental Fee applied to purchase price: 100
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES % Discount (See Special Terms and Conditions)
Price List Date and Number: N/A
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
3” lunet ring in lieu of standard 2-1/2" pintle ring
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper Morbark M8D PTO
MAKE AND MODEL Morbark M8D PTO
Chipper inch capacity 8"
Weight 2,100 LBS
Required hitch category 3 point
PTO RPMs 540
Required minimum HP 25
Required maximum HP 50
Feed table length 57 7/8"
Distance from feed roller to ground 91 1/2"
Feed rate 75
Feed roller size and configuration 8 7/8" Dia. Horizontal
Chipper cutting wheel size 28"
Number of chipper knives 2
Knife description information Double Edge 3/8" X 4" X 10 1/2"
Height of discharge chute 78 11/16"
Chute rotation 360 degrees
Hydraulic tank size 9 gallons
Warranty 1 year complete with 2nd year on Morbark components only
PRICE: 18,955.00
Morbark, LLCWayne Watts8507 S. Winn Road1000
Base Unit Price Quote
Winn, MI 48896(989) 866-2381(800) 831-0042(989) 866-2280
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE PAGESC-796(5)
03-2016
Vendor Name: Morbark, LLC
Make/Model: M8D PTOQty Price Subtotal
Unit Base Price 18,955.00 -$
Spec No. Description Qty Price Subtotal3.3.1
Automatic feed system (requires additional power source from tractor) 1,890.00$ Bottom bump bar (requires auto feed system option) 1,777.50$ Variable speed flow control 360.00$
Total Cost: -$
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/A
3.3.4 NEW EQUIPMENT RENTAL PROGRAM
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS N/AAND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.
NO FLATE RATES ALLOWED
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper Morbark M12R PTO
MAKE AND MODEL Morbark M12R PTO
Chipper inch capacity 12"
Weight 3520 lbs
Required hitch category 3-point
PTO RPMs 540 or 1000
Required minimum HP 50
Required maximum HP 100
Feed table length 48 3/8"
Distance from feed roller to ground 84 3/4"
Feed rate 103 fpm
Feed roller size and configuration Double feed wheel 18 1/4" Dia. & 8 7/8" Dia Horrizonal
Chipper cutting wheel size 21 3/16"
Number of chipper knives 2
Knife description information A8 Modified double edged
Height of discharge chute 85 1/6"
Chute rotation 360
Hydraulic tank size 9 gallons
Warranty 1 year complete with 2nd year on Morbark components only
PRICE: 23653.15
(800) 831-0042(989) [email protected]
Base Unit Price Quote
(989) 866-2381
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE PAGESC-796(5)
03-2016
Vendor Name: Morbark LLC
Make/Model: M12R PTOQty Price Subtotal
Unit Base Price 23,653.15$ -$
Spec No. Description Qty Price Subtotal3.3.1
Automatic feed system (requires additional power source from tractor) 1,890.00$ Bottom bump bar (requires auto feed system option) 1,777.50$ Variable speed flow control 360.00$
Total Cost: -$
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/C
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/C
3.3.4 NEW EQUIPMENT RENTAL PROGRAM
Hourly Rental Rate: $Weekly Rental Rate: $Monthly Rental Rate: $
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS N/CAND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
NO FLATE RATES ALLOWED
If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper Morbark M15R PTO
MAKE AND MODEL Morbark M15R PTO
Chipper inch capacity 15"
Weight 4,800 lbs
Required hitch category 3-point
PTO RPMs 540 or 1000
Required minimum HP 100
Required maximum HP 150
Feed table length 65 11/16"
Distance from feed roller to ground 98 5/8"
Feed rate 103 fpm
Feed roller size and configuration Double feed wheel 18 1/4" Dia. & 8 7/8" Dia Horrizonal
Chipper cutting wheel size 21 3/16"
Number of chipper knives 2
Knife description information A8 Modified double edged
Height of discharge chute 86 5/8"
Chute rotation 360
Hydraulic tank size 11 gallons
Warranty 1 year complete with 2nd year on Morbark components only
PRICE: 30415
(989) 866-2381
Morbark, LLCWayne Watts8507 S. Winn Road1000Winn, MI 48896
(800) 831-0042(989) [email protected]
Base Unit Price Quote
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE PAGESC-796(5)
03-2016
Vendor Name: Morbark LLC
Make/Model: M15R PTOQty Price Subtotal
Unit Base Price 30,415.00$ -$
Spec No. Description Qty Price Subtotal3.3.1
Automatic feed system (requires additional power source from tractor) 1,890.00$ Bottom bump bar (requires auto feed system option) 1,777.50$ Variable speed flow control 360.00$
Total Cost: -$
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/C
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: No chargeMINIMUM DELIVERY CHARGE (if applicable) N/C
3.3.4 NEW EQUIPMENT RENTAL PROGRAM
Hourly Rental Rate: $Weekly Rental Rate: $Monthly Rental Rate: $
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS N/CAND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
NO FLATE RATES ALLOWED
If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME
Morbark, LLC 357915 0018507 S. Winn Road Winn MI/48896 (800) 831-0042 Wayne Watts
Trenchers Plus Inc 209158 0012309 West Highway 13 Burnsville MN/55337 952-890-6000 John Rabideaux
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper AX19
Make & Model Vermeer AX19
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 19 Inches
Weight 11,000 Pounds
Engine type, model, HP, etc. 173HP John Deere 4045 Tier 4 Final
Fuel tank size 40 Gallons
Battery size (CCA) 950CCA
Instrumentation
Digital Display with tachometer, hourmeter, oil pressure, water temp,
battery voltage and engine error codes. Fuel and DEF gauges
Trailer tires LT285/75R16 LRE
Trailer suspension type & capacity Dual 7000 pound torsion axles
Trailer Brakes Electric Standard
Trailer hitch type Pintle Ring
Feed table length 60.5 inches
Distance from feed roller to ground 30.3 inches from feed table to ground
Feed rate 119 feet per minute
Feed roller size and configuration
Dual offset horizontal rollers. Upper roller is 28.25X11 inches and the lower
roller is 28.25X11 inches
Chipper cutting wheel size 36 inch diameter drum
Number of chipper knives 4
Knife description information A8 Chipper Steel
Height of discharge chute 108 inches
Chute rotation 270 degrees
Hydraulic tank capacity 20 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $94,470.00
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer AX19__________________________________Qty Price Subtotal
Unit Base Price: 94,470.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.
-$ -$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.1. Hydraulic jack 1,303.00$ -$ 2. Manual Outriggers 990.00$ -$ 3. Hydraulic Jack and Outriggers 5,591.00$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. Smartfeed and Eco Idle Standard Features-No Charge -$ -$ 2. Chute-Manually adjustable height chute w/ hydraulic deflector and rotate 1,106.00$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.1. Live Hydraulics Standard Feature-No Charge -$ -$ 2. Winch-150 foot of 9/16 inch roper with 3250 pounds of line pull 6,300.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Remote Control-Tree Commander-Standard Feature-No Charge -$ -$ 2. Remote Control-Full Function Remote-Live display of machine parameters and full control of machine 2,884.00$ -$
-$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 Months or 2000 Hour warranty from date of delivery $4,146.0036 Months or 3000 Hour warranty from date of delivery $6,624.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $2,801.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $0.00MINIMUM DELIVERY CHARGE (if applicable) $0.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here:
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper BC900XL
Make & Model Vermeer BC900XL
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 9 Inches
Weight 2980 Pounds
Engine type, model, HP, etc. 35HP Briggs and Stratton Gas Engine
Fuel tank size 16 Gallons
Battery size (CCA) 580CCA, Group 24
Instrumentation Hour Meter, Fuel Tank Sight Gauge
Trailer tires ST215/75R14
Trailer suspension type & capacity Rubber Torsional, 3500 Pounds
Trailer Brakes None
Trailer hitch type Pintle Ring
Feed table length 66 inches to the Pinch Point
Distance from feed roller to ground 29 inches from feed table to the ground
Feed rate 146 Feet per Minute
Feed roller size and configuration1 horizontal roller, 15.8 inch diameter X
13.5 inches long
Chipper cutting wheel size 33 inch diameter disc
Number of chipper knives 2
Knife description information A8 Chipper Steel
Height of discharge chute 96.7 inches
Chute rotation270 degrees, dual handle manual
rotation
Hydraulic tank capacity 6.8 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $23,928.00
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer BC900XL_________________________________Qty Price Subtotal
Unit Base Price: 23,928.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.1. Centrifugal clutch in lieu of manual clutch-must choose electric brake axle in section 2.3.2 574.00$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.1. 3500 pound torsion axle w/ electric brakes 775.00$ -$ 2. 7-Way RV trailer plug in lieu of 6 way round plug---NO CHARGE UPGRADE -$ -$
-$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. Smartfeed Standard Feature-No Charge -$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.1. Live Hydraulics Standard Feature-No Charge -$ -$
-$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Engine Cover-if ordering this option, must choose electric brake option in section 2.3.2 118.00$ -$ 2. Cone Storage Mount-if ordering this option, must choose electric brake option in section 2.3.2 212.00$ -$ 3. Side Marker Lights 84.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 months or 2000 Hour warranty from date of delivery $1,116.0036 months or 3000 Hour warranty from date of delivery $1,629.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $769.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $0.00MINIMUM DELIVERY CHARGE (if applicable) $0.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper BC1000XL
Make & Model Vermeer BC1000XL
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 12 Inches
Weight 4680 Pounds
Engine type, model, HP, etc. 89HP PSI 3.0L EFI Gas Engine
Fuel tank size 20 Gallons
Battery size (CCA) 580 CCA, Group 24
Instrumentation Fuel and multi function display
Trailer tires ST235/80R16
Trailer suspension type & capacity Rubber Torsional Dexter, 5200 Pounds
Trailer Brakes Electric Standard
Trailer hitch type Pintle Ring
Feed table length 66.5 inches to pinch point
Distance from feed roller to ground 26 inches from feed table to ground
Feed rate 118 feet per minute
Feed roller size and configuration 1 horizontal roller, 20 X 17 inches
Chipper cutting wheel size 20 inch diameter drum
Number of chipper knives 2
Knife description information A8 Chipper Steel
Height of discharge chute 101 inches
Chute rotation270 degrees, manual rotate with pin
lock
Hydraulic tank capacity 7 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $32,751.00
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer BC1000XL__________________________________Qty Price Subtotal
Unit Base Price: 32,751.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.1. 49HP Duetz D2.9L Tier 4 Final diesel engine option-weight changes to 4995 pounds, battery changes to 950CCA, group 31 4,103.00$ -$ 2. 74HP Duetz TD2.9L Tier 4 Final diesel engine option, weight changes to 4995 pounds, battery changes to 950CCA, group 31 6,364.00$ -$
-$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.1. 7000 Pound Torsion Axle, Electric Brakes 455.00$ -$ 2. 5200 Pound Hydraulic Brake Axle 1,344.00$ -$
-$
2.3.3 TRACK OPTIONS: Use this section to list track options. N/A -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. Smartfeed and Eco Idle Standard Feature-No Charge -$ -$ 2. Deluxe Discharge Chute 351.00$ -$ 3. Deluxe Sound Reduction 313.00$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.1. Live Hydraulics Standard Feature-No Charge -$ -$
-$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Instrument Panel Cover 156.00$ -$ 2. Belt and knife service kit 306.00$ 3. Flag Mounts 178.00$ 4. Cone Storage mounts 208.00$ -$ 5. Tree Commander Remote Control Kit---IK013054 2,777.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 months or 2000 Hour warranty from date of delivery $1,688.0036 months or 3000 Hour warranty from date of delivery $2,245.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $1,142.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $0.00MINIMUM DELIVERY CHARGE (if applicable) $0.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper BC1200XL
Make & Model Vermeer BC1200XL
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 12 Inches
Weight 5680 Pounds
Engine type, model, HP, etc. 135HP, PSI 4X Gas Engine
Fuel tank size 25 Gallons
Battery size (CCA) 950 CCA, Group 31
Instrumentation
Fuel, Hour, Voltage, Water Temp, Oil Pressure, Tach Gauges and multi
function display
Trailer tires ST285/75R16 LRE Flotation Tires
Trailer suspension type & capacity Rubber Torsional Dexter, 7000 Pounds
Trailer Brakes Electric Standard
Trailer hitch type Pintle Ring
Feed table length 67.4 inches to pinch point
Distance from feed roller to ground 27.2 inches from feed table to ground
Feed rate 110 feet per minute
Feed roller size and configurationDual Offset Horizontal rollers. Upper is 15X17 inches, Lower is 11.1X17 inches
Chipper cutting wheel size 20 inch diameter drum
Number of chipper knives 2
Knife description information A8 Chipper Steel
Height of discharge chute 104 inches
Chute rotation270 degrees, manual rotate with pin
lock
Hydraulic tank capacity 12 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $45,684.00
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer BC1200XL__________________________________Qty Price Subtotal
Unit Base Price: 45,684.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.
-$ -$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.1. ST235/80R16 LRE Tires (432.00)$ -$
-$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. N/A -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. Smartfeed and Eco Idle Standard Features-No Charge -$ -$ 2. Deluxe Chute Rotate 370.00$ -$ 3. Deluxe Discharge Deflector 359.00$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.1. Live Hydraulics Standard Feature-No Charge -$ -$ 2. Winch-150 foot of 7/16 inch rope with detachable choker chain, 2000 pound line pull 4,352.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Tree Commander Remote control---IK013054 2,777.00$ -$
-$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 Months or 2000 Hour warranty from date of delivery $2,248.0036 Months or 3000 Hour warranty from date of delivery $3,025.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $1,520.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $0.00MINIMUM DELIVERY CHARGE (if applicable) $0.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper BC1500
Make & Model Vermeer BC1500
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 15 Inches
Weight 6960 Pounds
Engine type, model, HP, etc. 165HP, PSI 5.7L Gas Engine
Fuel tank size 50 Gallons
Battery size (CCA) 950 CCA, Group 31
Instrumentation Fuel Gauge and Multi Function Gauge
Trailer tires LT285/75R16E
Trailer suspension type & capacity Rubber Torsional Dexter, 8000 Pounds
Trailer Brakes Electric Standard
Trailer hitch type Pintle Ring
Feed table length 67.4 inches to pinch point
Distance from feed roller to ground 29.5 inches from feed table to ground
Feed rate 125 feet per minute
Feed roller size and configuration Dual vertical rollers. 21X20 inches
Chipper cutting wheel size 23.8 inch diameter drum
Number of chipper knives 2
Knife description information A8 Chipper Steel
Height of discharge chute 104 inches
Chute rotation 270 degrees, manual rotation
Hydraulic tank capacity 15 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $49,487.00
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer BC1500__________________________________Qty Price Subtotal
Unit Base Price: 49,487.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.1. Cummins 3.8L Tier 4 Final Diesel Engine-weight increase of 530 pounds and fuel tank goes to 45 Gallons 13,427.00$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.-$ -$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. N/A -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. Smartfeed and Eco Idle Standard Features -$ -$ 2. Hydraulic Discharge Chute 2,719.00$ -$
-$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.1. Live Hydraulics Standard Feature -$ -$ 2. Winch-150 foot of 7/16 inch rope with detachable choker chain, 2000 pound line pull 4,038.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Tree Commander Remote control---IK013054 2,777.00$ -$
-$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 Months or 2000 Hour warranty from date of delivery $2,598.0036 Months or 3000 Hour warranty from date of delivery $4,158.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $1,757.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $0.00MINIMUM DELIVERY CHARGE (if applicable) $0.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: $5,000.00
Percent (%) of Rental Fee applied to purchase price: 100%
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: _8.5% on a declining balance. Rent Purchase not to exceed 3 months.
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper BC1800XL
Make & Model Vermeer BC1800XL
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 19 Inches
Weight 8800 Pounds
Engine type, model, HP, etc. 165HP, PSI 5.7L Gas Engine
Fuel tank size 50 Gallons
Battery size (CCA) 950 CCA
Instrumentation
Digital Display with tachometer, hourmeter, oil pressure, water temp,
and engine error codes.
Trailer tires 235/75R17.5 LRH
Trailer suspension type & capacityRubber Torsional Dexter, 10,000
Pounds
Trailer Brakes Electric Standard
Trailer hitch type Pintle Ring
Feed table length 62.5 inches to pinch point
Distance from feed roller to ground 30.5 inches from feed table to ground
Feed rate 117 feet per minute
Feed roller size and configuration Dual vertical rollers. 23.5X18 inches
Chipper cutting wheel size 36 inch diameter drum
Number of chipper knives 4
Knife description information A8 Chipper Steel
Height of discharge chute 110 inches
Chute rotation 270 degrees, worm gear rotation
Hydraulic tank capacity 12 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $60,584.00
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer BC1800XL__________________________________Qty Price Subtotal
Unit Base Price: 60,584.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.1. Cummins 130HP 3.8L Tier 4 final diesel 9,154.00$ -$ 2. John Deere 139HP 4045 Tier 4 final diesel 14,563.00$ -$ 3. John Deere 173HP 4045 Turbo Tier 4 final diesel 18,186.00$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.1. Heavy duty hydraulic jack 2,077.00$ -$
-$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. Smartfeed and Eco Idle Standard Features-No Charge -$ -$ 2. Chute---Tall discharge, manual rotation 158.00$ 3. Chute---Manual height adjustable, manual rotate 595.00$ 4. Chute---Hydraulic discharge chute-rotate and deflector 2,745.00$ 5. Chute---Hydraulic tall discharge chute-rotate and deflector 2,897.00$ -$ 6. Chute---Hydraulic rotation and manual adjustable height 3,331.00$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.1. Live Hydraulics Standard Feature-No Charge -$ -$ 2. Winch. Winch is equipped with 150 foot of 7/16 inch rope with detachable choker chain, 2000 pound line pull. Depending on all options chosen, machine total weight may exceed 10,000 pounds. 4,056.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Tree Commander Remote Control Standard Feature-No Charge -$ -$
-$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 Months or 2000 Hour warranty from date of delivery $3,296.0036 Months or 3000 Hour warranty from date of delivery $5,273.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $2,230.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $0.00MINIMUM DELIVERY CHARGE (if applicable) $0.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: $6,000.00
Percent (%) of Rental Fee applied to purchase price: 100%
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: _8.5% on a declining balance. Rent Purchase not to exceed 3 months.
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper WC2300XL
Make & Model Vermeer WC2300XL
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 23 Inches
Weight 32,700 pounds
Engine type, model, HP, etc. 440HP CAT C13 Tier 4 Final
Fuel tank size 150 Gallons
Battery size (CCA) Dual 1155 CCA, Group 8D
InstrumentationRemote Control w/ Full Function
Display
Trailer tires 385/65R22.5 Super Singles
Trailer suspension type & capacity Dual Axle Leaf Spring
Trailer Brakes Air
Trailer hitch type Pintle Ring
Feed table length 10 foot table with conveyor chain
Distance from feed roller to ground N/A
Feed rate 98 Feet per Minute
Feed roller size and configuration28X34 INCH HORIZONTAL FEED
ROLLER
Chipper cutting wheel size 36 inch diameter drum
Number of chipper knives 8
Knife description information A8 Chipper Steel
Height of discharge chute 132 inches
Chute rotation
14 DEGREES LEFT AND RIGHT, 14 DEGREES DOWN AND 22 DEGREES
UP
Hydraulic tank capacity 42 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $332,750.00
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer WC2300XL__________________________________Qty Price Subtotal
Unit Base Price: 332,750.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.
-$ -$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.-$ -$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. -$ -$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. High wear belly band 1,231.00$ -$ 2. Overs reduction-8 dividers 163.00$ 3. Tall discharge chute 2,709.00$ 4. Macro Drum Standard cut of 1 1/8-1 1/4 inches. Decrease depth of cut to 5/8-3/4 or 7/8-1 inch 2,281.00$ 5. Change to Micro Drum---Standard Depth of Cut is 1/2-5/8 inch 4,381.00$ -$ 6. Change Micro depth of cut to 3/16-3/8 inch 2,461.00$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.-$ -$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Work Lighting 395.00$ -$ 2. Artic Package and Air Compressor w/ enclosure, air dryer and heater 24,274.00$ -$
-$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 Months or 2000 Hour warranty from date of delivery $17,661.0036 Months or 3000 Hour warranty from date of delivery $23,544.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $11,946.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $6.00MINIMUM DELIVERY CHARGE (if applicable) $300.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: 6000Monthly Rental Rate: $18,000.00
Percent (%) of Rental Fee applied to purchase price: 90%
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: 8.5% on a decling balance. Rent Purchase not to exceed 3 months.
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
INSTRUCTIONS FOR DOWNLOADING AND SUBMITTING AN EXCEL® PRICE SCHEDULEWHEN RESPONDING TO A SWIFT EVENT
PRICE SCHEDULE INSTRUCTIONS:A Price Schedule in Excel® 97-2003 WORKSHEET (.xls), Microsoft Excel® 2010 Worksheet (.xlsx), or later version is attached to the ‘Line
Details’ of this Event. You must ‘download’ and save the Excel® Price Schedule to your desktop before you can enter information or pricing.
On the Excel® Price Schedule, type your responses to the requested information. Type in the yellow/shaded cells only. Keep descriptions to less than 250 characters per cell. Use the TAB KEY to advance to the next cell.Do not change pre-typed cells.On the Excel Price Sheet(s), make sure the spec numbers (e.g., A.1, A.2, A.3.) are recorded in the proper sequence when you are filling in those lines with information. To insert additional lines, use the "Insert Row" function.On the Excel Price Sheet(s), the price should represent the industry standard unit of measure for that item or option. If clarification of the unit of measure is needed, contact the AMS/Buyer prior to the Event End Date. Type the catalog price list discount amount or percentage information in the space provided. If more than one discount applies to a catalog, state the different discounts along with the sections/products that they pertain to in the shaded space provided. Save your completed Price Schedule.
FOR FIXED PRICE METHOD – For each “Make & Model” create a Price Sheet Tab at the bottom of the workbook (example: Craftsman - # 4237 Skill Saw). After equipment Information and Pricing Sheets have been filled in, save your workbook. Do this by choosing the "File" menu, "Save As" and then type the appropriate information for the workbook as the file name (example: Craftsman Tools Price Schedule).Attach your File attachment to your Event response in the Supplier Portal.IF YOUR FILES ARE TOO LARGE, USE A ZIP FILE
ZIP FILE INSTRUCTIONS:If the Solicitation instructions require submittals to be uploaded/attached in a "ZIP" file, do the following:Create one Price Schedule for each make and model offered in the Excel Workbook and title each tab with the Make and Model Number (i.e., John Deere Model #1) offered.When all of the files have been completed in the proper format, CREATE A “ZIP” FILE that will contain all of the data that is being offered for the Event. “Upload” the “Zip” file.
If the offer returned with the Event includes multiple Price Schedules and Technical Data, and is not submitted in a “ZIP” file, the State reserves
the right to reject the offer in its entirety.
UPLOADING/ATTACHING INSTRUCTIONS:To "Upload/Attach" the completed Price Schedule Workbook, you must ‘upload/attach’ the completed Price Schedule Workbook where
indicated and select the ‘I HAVE ATTACHED MY PRICE SCHEDULE’ box where directed in the Line Details section of the Event.
DO NOT SELECT: ‘I DECLINE TO BID ON THIS LINE’ ! Selecting this box may cause your response to be rejected.
Responses will only be accepted on the Price Schedule Workbook included with the Event. The completed Price Schedule Workbook should be uploaded in either a Microsoft Excel® 97-2003 Worksheet (.xls), or Microsoft Excel® 2010 Worksheet (.xlsx). The State reserves the right to reject Price Schedules submitted in any other format. Other Excel® file extensions that MAY be compatible are: .xlsm, .xlt, .xltm, and .xlw.
Responders MUST use the Excel Price Schedule included in the SWIFT Solicitation. The State reserves the right to reject any offer that is not submitted on the Price Schedule included in the SWIFT solicitation.
Once you have completed and submitted your response, you will receive a system confirmation message that your response has been ‘accepted’.
Lines with a Price Schedule attached to them will show as $0.00. Print and save the confirmation for your file. If you’re having trouble submitting
your response or attaching your Price Schedule, call the Help Desk at 651-201-8100 – Option No. 1.
"DO NOT" SUBMIT THE EXCEL PRICE SCHEDULE AS PDF FILES. The State reserves the right to reject responses if the Excel Price Schedule are submitted as PDF files or any other format not supported by SWIFT. Prices must be submitted as outlined above.
12/2015
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMERDO-Vermeer, LLC VN0000291783_1 001 1675-126th Street West, Burnsville MN, 55337 612-499-2147 Mark Rieckhoff
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper WC2500XL
Make & Model Vermeer WC2500XL
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 25 Inches
Weight 38,000 Pounds
Engine type, model, HP, etc. 600HP Cummins QSX15 Tier 4 Final
Fuel tank size 200 Gallons
Battery size (CCA) Dual 1400 CCA, Group 8D
InstrumentationRemote Control w/ Full Function
Display
Trailer tires 385/65R22.5 Super Singles
Trailer suspension type & capacity Dual Axle Leaf Spring
Trailer Brakes Air
Trailer hitch type Pintle Ring
Feed table length 10 foot table with conveyor chain
Distance from feed roller to ground N/A
Feed rate 98 Feet per Minute
Feed roller size and configuration28X34 INCH HORIZONTAL FEED
ROLLER
Chipper cutting wheel size 36 inch diameter drum
Number of chipper knives 8
Knife description information A8 Chipper Steel
Height of discharge chute 132 inches
Chute rotation
14 DEGREES LEFT AND RIGHT, 14 DEGREES DOWN AND 22 DEGREES
UP
Hydraulic tank capacity 33 gallons
Warranty1 year or 1000 hours, whichever occurs
first, parts and labor
PRICE: $376,861.00
RDO-Vermeer, LLCMark Rieckhoff1675-126th Street West
Base Unit Price Quote
Burnsville, MN 55337952-890-6144888-562-7062952-882-2980
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: _RDO-Vermeer, LLC____________________________________________________
MAKE AND MODEL OFFERED:__Vermeer WC2500XL__________________________________Qty Price Subtotal
Unit Base Price: 376,861.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.
-$ -$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.-$ -$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. 1. WC2500TX Track Option. Comes with 20 Inch Single or Double Grouser Steel Pads. 80,261.00$ -$ A. All of the below options apply to the track option. Standard machine comes with macro depth of cut at 1 1/8-1 1/4 inches, except the warranty pricing and rental rates. Warranty changes to $18,904 for 24 months, $30,194 for 36 months and $12,771 for the 4 services. Rental rates change to $7,500/week and $22,500/month. Terms remain the same. -$
-$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.1. High wear belly band 1,231.00$ -$ 2. Overs reduction-8 dividers 180.00$ 3. Macro Drum Standard cut of 1 1/8-1 1/4 inches. Decrease depth of cut to 5/8-3/4 or 7/8-1 inch 2,281.00$ 4. Change to Micro Drum---Standard Depth of Cut is 1/2-5/8 inch 4,381.00$ -$ 5. Change Micro depth of cut to 3/16-3/8 inch 2,461.00$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.-$ -$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other options1. Air Compressor Assembly-includes compressor, dryer, and enclosure 6,729.00$ -$
-$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
24 Months or 2000 Hour warranty from date of delivery $15,644.0036 Months or 3000 Hour warranty from date of delivery $24,989.00
4 Planned Maintenance Packages (250/500/750/1000 hour OEM scheduled maintenance) $10,569.00
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip Burnsville, MN 55337
PRICE PER LOADED MILE: $6.00MINIMUM DELIVERY CHARGE (if applicable) $300.00
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: $7,000.00Monthly Rental Rate: $21,000.00
Percent (%) of Rental Fee applied to purchase price: 90%
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: 8.5% on a decling balance. Rent Purchase not to exceed 3 months.
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 0% Discount (See Special Terms and Conditions)
Price List Date and Number: 11/4/2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper Chipper
MAKE AND MODEL Wallenstein BX52S-yel
Chipper inch capacity 5"
Weight 505 lbs.
Required hitch category Cat. I & II
PTO RPMs 540-1,000 rpm
Required minimum HP 22 HP for operation / 40 HP for max capacity
Required maximum HP 50 HP
Feed table length manual
Distance from feed roller to ground manual
Feed rate manual
Feed roller size and configuration manual
Chipper cutting wheel size 24.75"
Number of chipper knives 4
Knife description information reversible
Height of discharge chute 66"
Chute rotation 360 degree
Hydraulic tank size none
Warranty 2-years
PRICE: $4,590.00
Base Unit Price Quote
Lake Mary, FL 32746407-359-2373
407-359-2372
Technology International, Inc.Shaji Habib1349 S. International Parkway, Suite 2411
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE PAGESC-796(5)
03-2016
Vendor Name: Technology International, Inc.
Make/Model: Wallenstein BX52S-yelQty Price Subtotal
Unit Base Price $4,590.00 4,590.00$
Spec No. Description Qty Price Subtotal3.3.1
-$ -$ -$
Total Cost: 4,590.00$
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: $
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: $MINIMUM DELIVERY CHARGE (if applicable) $
3.3.4 NEW EQUIPMENT RENTAL PROGRAM
Hourly Rental Rate: $Weekly Rental Rate: $Monthly Rental Rate: $
Percent (%) of Rental Fee applied to purchase price: %
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price $
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS % AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.
NO FLATE RATES ALLOWED
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMETRI-STATE BOBCAT INC 206308 1200 HWY 13 E BURNSVILLE MN/55337
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Yes
Make & Model Bandit 12XP
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 12"
Weight 4,900 pounds
Engine type, model, HP, etc. Ford 2.5L 84 hp gas
Fuel tank size 25 gallons
Battery size (CCA) 1,000 CCA
Instrumentation Bandit control panel
Trailer tires 225/75R 15"
Trailer suspension type & capacity 7,000 Torsion
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 30"
Distance from feed roller to ground 88"
Feed rate 115 FPM
Feed roller size and configuration Horizontal
Chipper cutting wheel size 24" diameter
Number of chipper knives 4
Knife description information Dual Edge
Height of discharge chute 98"
Chute rotation 360 degree
Hydraulic tank capacity 12 gallons
Warranty 1 year / 1,000 hours
PRICE: 36160
Base Unit Price Quote
Little Canada, MN 55117952-894-0894
Tri-State BobcatNick Kentros71 Minnesota Avenue
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: Tri-State Bobcat
MAKE AND MODEL OFFERED: Bandit Model 12XPQty Price Subtotal
Unit Base Price: 36,160.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Cat C3.4, 74 horsepower diesel with NACD spring loaded clutch - Tier 4 Final 9,345.00$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.n/a -$
-$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. n/a -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic swivel discharge 748.00$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic winch w/ rope 4,268.00$ -$
-$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBolt on chock holder and chocks 194.00$ -$ Weld on hoop style cone holder 154.00$ -$ Telecscoping tongue 506.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: N/AMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES N/A (See Special Terms and Conditions)
Price List Date and Number: 11/13/19 2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Yes
Make & Model Bandit 15XP
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 15"
Weight 7,500 pounds
Engine type, model, HP, etc. PSI 4.3L, 145 hp gas
Fuel tank size 25 gallons
Battery size (CCA) 1,000 CCA
Instrumentation Bandit control panel
Trailer tires 215/75R 17.5"
Trailer suspension type & capacity 10,000 Torsion
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 30"
Distance from feed roller to ground 88"
Feed rate 115 FPM
Feed roller size and configuration Horizontal
Chipper cutting wheel size 37" diameter
Number of chipper knives 4
Knife description information Dual Edge
Height of discharge chute 104"
Chute rotation 360 degree
Hydraulic tank capacity 12 gallons
Warranty 1 year / 1,000 hours
PRICE: 45055
Base Unit Price Quote
Tri-State BobcatNick Kentros71 Minnesota Avenue
Little Canada, MN 55117952-894-0894
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: Tri-State Bobcat
MAKE AND MODEL OFFERED: Bandit Model 15XPQty Price Subtotal
Unit Base Price: 45,055.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Cat C3.4, 120 horsepower diesel with NACD spring loaded clutch - Tier 4 Final 15,250.00$ -$ GM 5.7, 165 horsepower gas engine with NACD spring loaded clutch 3,027.00$ -$
-$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.n/a -$
-$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. n/a -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic swivel discharge 748.00$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic winch w/ rope 4,268.00$ -$
-$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBolt on chock holder and chocks 194.00$ -$ Weld on hoop style cone holder 154.00$ -$ Solid infeed tray in lieu of fold down 286.00$ -$ Telecscoping tongue 506.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: N/AMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES N/A (See Special Terms and Conditions)
Price List Date and Number: 11/13/19 2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Yes
Make & Model Bandit 18XP
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 18"
Weight 9,200 pounds
Engine type, model, HP, etc. GM 5.7L, 165 hp gas
Fuel tank size 30 gallons
Battery size (CCA) 1,000 CCA
Instrumentation Bandit control panel
Trailer tires 215/75R 17.5"
Trailer suspension type & capacity 10,000 Torsion
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 30"
Distance from feed roller to ground 88"
Feed rate 115 FPM
Feed roller size and configuration Horizontal
Chipper cutting wheel size 37" diameter
Number of chipper knives 4
Knife description information Dual Edge
Height of discharge chute 104"
Chute rotation 360 degree
Hydraulic tank capacity 12 gallons
Warranty 1 year / 1,000 hours
PRICE: 50215
Base Unit Price Quote
Tri-State BobcatNick Kentros71 Minnesota Avenue
Little Canada, MN 55117952-894-0894
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: Tri-State Bobcat
MAKE AND MODEL OFFERED: Bandit Model 18XPQty Price Subtotal
Unit Base Price: 50,215.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Cat C4.4, 174 horsepower diesel with NACD spring loaded clutch - Tier 4 Final 21,485.00$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.Single 12,000 pound Leaf Spring axles (must be selected with Cat 174) 594.00$ -$ 235/75R 17.5" tires (must be selected with 12,000 pound axle) 190.00$ -$
-$
2.3.3 TRACK OPTIONS: Use this section to list track options. n/a -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic swivel discharge 748.00$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic winch w/ rope 4,268.00$ -$
-$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBolt on chock holder and chocks 194.00$ -$ Weld on hoop style cone holder 154.00$ -$ Solid infeed tray in lieu of fold down 286.00$ -$ Hydraulic tongue 1,210.00$ -$ Telecscoping tongue 506.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: N/AMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES N/A (See Special Terms and Conditions)
Price List Date and Number: 11/13/19 2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Yes
Make & Model Bandit 19XPC
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 19"
Weight 9,800 pounds
Engine type, model, HP, etc. GM 5.7L, 165 hp gas
Fuel tank size 30 gallons
Battery size (CCA) 1,000 CCA
Instrumentation Bandit control panel
Trailer tires 235/75R 17.5" tires
Trailer suspension type & capacity 12,000 pound Leaf Spring
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 30"
Distance from feed roller to ground 88"
Feed rate 115 FPM
Feed roller size and configuration Horizontal
Chipper cutting wheel size 37" diameter
Number of chipper knives 4
Knife description information Dual Edge
Height of discharge chute 104"
Chute rotation 360 degree
Hydraulic tank capacity 12 gallons
Warranty 1 year / 1,000 hours
PRICE: 58268
Base Unit Price Quote
Tri-State BobcatNick Kentros71 Minnesota Avenue
Little Canada, MN 55117952-894-0894
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: Tri-State Bobcat
MAKE AND MODEL OFFERED: Bandit Model 19XPCQty Price Subtotal
Unit Base Price: 58,268.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Cat C4.4, 174 horsepower diesel with NACD spring loaded clutch - Tier 4 Final 21,485.00$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.-$ -$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. n/a -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic swivel discharge 748.00$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic winch w/ rope 4,268.00$ -$
-$ -$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBolt on chock holder and chocks 194.00$ -$ Weld on hoop style cone holder 154.00$ -$ Solid infeed tray in lieu of fold down 286.00$ -$ Hydraulic tongue 1,210.00$ -$ Telecscoping tongue 506.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: $
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: N/AMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES N/A (See Special Terms and Conditions)
Price List Date and Number: 11/13/19 2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Yes
Make & Model Bandit 90XP
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 9"
Weight 4,500 pounds
Engine type, model, HP, etc. Ford 2.5L 84 hp gas
Fuel tank size 24 1/2 gallons
Battery size (CCA) 1,000 CCA
Instrumentation IEC Tach
Trailer tires 225/75R 15" tires
Trailer suspension type & capacity 6,000 pound Torsion
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 30"
Distance from feed roller to ground 88"
Feed rate 90 FPM
Feed roller size and configuration Horizontal
Chipper cutting wheel size 30" diameter
Number of chipper knives 4
Knife description information Dual Edge
Height of discharge chute 96"
Chute rotation 360 degree
Hydraulic tank capacity 7 gallons
Warranty 1 year / 1,000 hours
PRICE: 23595
Base Unit Price Quote
Tri-State BobcatNick Kentros71 Minnesota Avenue
Little Canada, MN 55117952-894-0894
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: Tri-State Bobcat
MAKE AND MODEL OFFERED: Bandit Model 90XPQty Price Subtotal
Unit Base Price: 23,595.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Ford 2.5L, 84 horsepower gas engine with NACD spring loadeed clutch 6,388.80$ -$ Cat C3.4L, 74 horsepower diesel engine with NACD spring loaded clutch - Tier 4 FINAL 15,734.00$ -$
-$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.-$ -$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. n/a -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic swivel discharge 748.00$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic winch w/ rope 4,268.00$ -$ Hydraulic lift cylinder 924.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBolt on chock holder and chocks 194.00$ -$ Weld on hoop style cone holder 154.00$ -$ 45" wide infeed hopper in lieu of 35" 348.00$ -$ Telecscoping tongue 506.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: N/AMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES N/A (See Special Terms and Conditions)
Price List Date and Number: 11/13/19 2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 2.2 Information Requested Answer
Furnish separate price quote for: Engine Driven Brush Chipper
Engine Driven Brush Chipper Yes
Make & Model Bandit 200XP
Is the Engine Tier IV Compliant (Yes/No) Yes
Chipper inch capacity 12"
Weight 5,300 pounds
Engine type, model, HP, etc. Ford 2.5L 84 hp gas
Fuel tank size 24 1/2 gallons
Battery size (CCA) 1,000 CCA
Instrumentation Bandit control panel
Trailer tires 235/80R 16" tires
Trailer suspension type & capacity 7,000 pound Torsion
Trailer Brakes Electric
Trailer hitch type 2 1/2" pintle
Feed table length 30"
Distance from feed roller to ground 88"
Feed rate 120 FPM
Feed roller size and configuration Horizontal
Chipper cutting wheel size 40" diameter
Number of chipper knives 4
Knife description information Dual Edge
Height of discharge chute 101"
Chute rotation 360 degree
Hydraulic tank capacity 12 gallons
Warranty 1 year / 1,000 hours
PRICE: 33015
Base Unit Price Quote
Tri-State BobcatNick Kentros71 Minnesota Avenue
Little Canada, MN 55117952-894-0894
ENGINE DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 2.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.2 - Engine Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
PRICE SCHEDULEC-796(5)
03-2016
VENDOR NAME: Tri-State Bobcat
MAKE AND MODEL OFFERED: Bandit Model 200XPQty Price Subtotal
Unit Base Price: 33,015.00$ -$
Spec No. Description Qty Price Subtotal
2.3.1 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with, etc., until you have listed all engine options. Use as many numbers as you need.Cat C3.4, 74 horsepower diesel with NACD spring loaded clutch - Tier 4 Final 9,345.00$ -$
-$ -$
2.3.2 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, etc.-$ -$ -$
2.3.3 TRACK OPTIONS: Use this section to list track options. n/a -$
-$ -$
2.3.4 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc.Hydraulic swivel discharge 748.00$ -$
-$ -$
2.3.5 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic winch, etc.Hydraulic winch w/ rope 4,268.00$ -$ Hydraulic lift cylinder 924.00$ -$
-$
2.3.6 OTHER OPTIONS: Use this section to offer other optionsBolt on chock holder and chocks 194.00$ -$ Weld on hoop style cone holder 154.00$ -$ Telecscoping tongue 506.00$ -$
Total Cost: -$
2.3.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)
Price: N/A
2.3.8 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED
DELIVERY STARTING POINT - City, State, Zip
PRICE PER LOADED MILE: N/AMINIMUM DELIVERY CHARGE (if applicable) N/A
2.3.9 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/AMonthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance charges are applicable for the actual rental term only,state the actual interest rate here: ________________
2.3.10 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A
2.3.11 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES N/A (See Special Terms and Conditions)
Price List Date and Number: 11/13/19 2019
ENGINE DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 2.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 2.3 - Engine Driven Brush Chipper-Options," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper US DITCHER WC90
MAKE AND MODEL US DITCHER WC90
Chipper inch capacity 6"
Weight 2446
Required hitch category THREE POINT CAT 2
PTO RPMs 540
Required minimum HP 40
Required maximum HP 100
Feed table length 47.25"
Distance from feed roller to ground 34"
Feed rate Feed rate: 4.5 to 8.5Y3/h
Feed roller size and configuration 5.5x7.8 horizontal
Chipper cutting wheel size 30"
Number of chipper knives 4
Knife description information Blade: Dual Edge 8.25”x2.125”x.4”
Height of discharge chute 32"
Chute rotation 360
Hydraulic tank size USE TRACTOR HY
Warranty 1 YEAR
PRICE: 14,950
763-682-2200
Trueman Welters incSeth Strehler1600 highway 55 east
Buffalo,Mn 55313
Base Unit Price Quote
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
Vendor Name: Trueman Welters Inc
Make/Model: usditcherQty Price Subtotal
Unit Base Price 0 $ -
Spec No. Description Qty Price Subtotal3.3.1 OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
none $ - $ - $ - $ - $ - $ -
Total Cost: $ -
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)Price: none
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLATE RATES ALLOWED
DELIVERY STARTING POINT - City, State, Zip Buffalo Mn 55313
PRICE PER LOADED MILE: 3.5MINIMUM DELIVERY CHARGE (if applicable) 250
3.3.4 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.Hourly Rental Rate: no bidWeekly Rental Rate: no bidMonthly Rental Rate: no bidPercent (%) of Rental Fee applied to purchase price: no bid
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price no bid
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper US DITCHER WC92
MAKE AND MODEL US DICHER WC92
Chipper inch capacity 8"
Weight 1820
Required hitch category THREE POINT CAT 2
PTO RPMs 540
Required minimum HP 50
Required maximum HP 120
Feed table length 55"
Distance from feed roller to ground 34"
Feed rate 8.5x11 y3/h
Feed roller size and configuration 2 ROLLERS size: 7.5” x 12.5”
Chipper cutting wheel size 35"
Number of chipper knives Blade: Dual Edge 8.25”x2.125”x.4”
Knife description information STEEL
Height of discharge chute 32.3"
Chute rotation 360
Hydraulic tank size no tank
Warranty 1 year
PRICE: 16,500.00
763-682-2200
Trueman Welters incSeth Strehler1600 highway 55 east
Buffalo,Mn 55313
Base Unit Price Quote
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
Vendor Name: Trueman Welters Inc
Make/Model: usditcherQty Price Subtotal
Unit Base Price 0 $ -
Spec No. Description Qty Price Subtotal3.3.1 OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
none $ - $ - $ - $ - $ - $ -
Total Cost: $ -
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)Price: none
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLATE RATES ALLOWED
DELIVERY STARTING POINT - City, State, Zip Buffalo Mn 55313
PRICE PER LOADED MILE: 3.5MINIMUM DELIVERY CHARGE (if applicable) 250
3.3.4 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.Hourly Rental Rate: no bidWeekly Rental Rate: no bidMonthly Rental Rate: no bidPercent (%) of Rental Fee applied to purchase price: no bid
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price no bid
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
File: C796-10-2019
Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:
Spec No. 3.2 Information Requested Answer
Furnish separate price quote for: PTO Driven Brush Chipper
PTO Driven Brush Chipper US DITCHER WC94
MAKE AND MODEL US DITCHER WC94
Chipper inch capacity 11"
Weight 1890
Required hitch category THREE POINT CAT 2
PTO RPMs 540/1000
Required minimum HP 50
Required maximum HP 130
Feed table length 55"
Distance from feed roller to ground 34"
Feed rate Feed rate: 8 x 12Y3/h
Feed roller size and configuration Feed roller size: 7.5” x 12.5”
Chipper cutting wheel size 39"
Number of chipper knives 4
Knife description information Blade: Dual Edge 8.25”x2.125”x.4”
Height of discharge chute 32"
Chute rotation 360
Hydraulic tank size USE TRACTOR HY
Warranty 1 YEAR
PRICE: 34,850
763-682-2200
Trueman Welters incSeth Strehler1600 highway 55 east
Buffalo,Mn 55313
Base Unit Price Quote
PTO DRIVEN BRUSH CHIPPER BASE UNIT REQUIREMENTS
SPECIFICATION NO. 3.2SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.2 - PTO Driven Brush Chipper," and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
Vendor Name: Trueman Welters Inc
Make/Model: usditcherQty Price Subtotal
Unit Base Price 0 $ -
Spec No. Description Qty Price Subtotal3.3.1 OPTIONS: Use this section to list options, such as chute discharge extensions, tail-light package, etc.
none $ - $ - $ - $ - $ - $ -
Total Cost: $ -
3.3.2 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options.(Specify years, miles or hours extended term covers.)Price: none
3.3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLATE RATES ALLOWED
DELIVERY STARTING POINT - City, State, Zip Buffalo Mn 55313
PRICE PER LOADED MILE: 3.5MINIMUM DELIVERY CHARGE (if applicable) 250
3.3.4 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions.Hourly Rental Rate: no bidWeekly Rental Rate: no bidMonthly Rental Rate: no bidPercent (%) of Rental Fee applied to purchase price: no bid
If the new rental equipment is purchased and financecharges are applicable for the actual rental term only,state the actual interest rate here: ________________
3.3.5 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price no bid
3.3.6 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0AND ACCESSORIES - (See Special Terms and Conditions)Price List Date and Number
PTO DRIVEN BRUSH CHIPPER OPTIONS
SPECIFICATION NO. 3.3SWIFT EVENT NO. 10142
Note: Responder must provide a response to the lines highlighted in yellow below. Upload catelogs on a separate attachment, Label the catelog attachment as "Attachment 3.3 - PTO Driven Brush Chipper,-Options" and submit with the response. The line items highlighted in yellow for each price schedule must be filled out. Enter N/A for line items you do not have a price or are not bidding. The State reserves the right to reject responses with incomplete price schedule.
COMPANY NAME SWIFT ID LOC CODE OMPANY ADDRES ST /ZIP PHONE CONTACT NAME Trueman Welters 193702 1 1600 highway 55 eMn/55313 763-682-2200 Seth Strehler
SWIFT EVENT TITLE : Chippers, Brush, PTO and Engine Driven
1. Following is a list of all distributors that are authorized to sell the equipment listed above. 2. The Swift Vendor Number (SWIFT ID) must be complete, including the vendor Swift ID and Location Code (LOC CODE).3. All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditions before any State Contract
may be executed.