En ISO 4624 - Pull-Off Test for Adhesion

5/19/2018 En ISO 4624 - Pull-Off Test for Adhesion

1/15

ICS 87.040

Beschichtungsstoffe Abreiversuch zur BeurteilungderHaftfestigkeit (ISO 4624 : 2002)

European Standard EN ISO 4624 : 2003 has the status of a DIN Standard.

National foreword

This standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, withoutalteration, International Standard ISO 4624 as a European Standard.

The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffeund Beschichtungen (Coatings and Coating Materials Standards Committee), Technical CommitteesLackrohstoffe andAllgemeine Prfverfahren fr Beschichtungsstoffe und Beschichtungen.

The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:

ISO Standard DIN Standard

ISO 1513 DIN EN ISO 1513



ISO 3270 DIN EN 23270ISO 15528 DIN EN ISO 15228

Amendments

This standard differs from DIN EN 24624, September 1992 edition, in that details of sampling and testequipment have been changed.

Previous editions

DIN EN 24624: 1992-09.

National Annex NA

Standards referred to(and not included in Normativereferences andAnnex ZA)

DIN EN 23270 Paints, varnishes and their raw materials Temperatures and humidities for condition-ing and testing (ISO 3270 : 1984)

DIN EN ISO 1513 Paints and varnishes Examination and preparation of samples (ISO 1513 : 1992)

DIN EN ISO 1514 Paints and varnishes Standard panels for testing (ISO 1514 : 1993)

DIN EN ISO 2808 Paints and varnishes Determination of film thickness (ISO 2808 : 1997)

DIN EN ISO 15528 Paints, varnishes and raw materials for paints and varnishes Sampling(ISO 15528 : 2000)

Ref . No. DIN EN ISO 4624 : 2003-08English pr ice group 11 Sales No.1111

xx.04

DEUTSCHE NORM

EN ISO 4624

{

EN comprises 13 pages.

No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen) .

Paints, varnishes and plasticsPull-off test for adhesion

(ISO 4624 : 2002)English version of DIN EN ISO 4624

August 2003

Supersedes DIN EN 24624,September 1992 edition.

NormCD-Issue2007-03

LINDE

AG

-

Vervielfltigung

lt.

DIN-

Merkblatt

3


2/15

NormCD-Issue2007-03


3/15

English version

ICS 87.040 Supersedes EN 24624 : 1992.

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for Standardization

Comit Europen de Normalisation

Europisches Komitee fr Normung

2003. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 4624 : 2003 E

Peintures, vernis et plastiques Essai

de traction (ISO 4624 : 2002)

Beschichtungsstoffe Abreiversuch

zur Beurteilung der Haftfestigkeit(ISO 4624 : 2002)

This European Standard was approved by CEN on 2003-03-17.

CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.

Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.

The European Standards exist in three off icial versions (English, French, German).A version in any other language made by translation under the responsibi lity of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ire-land, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.

EN ISO 4624

May 2003

Paints, varnishes and plasticsPull-off test for adhesion

(ISO 4624 : 2002)

NormCD-Issue2007-03


4/15

Page 2EN ISO 4624 : 2003

Foreword

International Standard

ISO 4624 : 2002 Paints and varnishes Pull-off test for adhesion,

which was prepared by ISO/TC 35 Paints and varnishesof the International Organization for Standardization,has been adopted by Technical Committee CEN/TC 139 Paints and varnishes, the Secretariat of which is heldby DIN, as a European Standard.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, and conflicting national standards withdrawn, by November 2003 at the latest.

In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:

Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and theUnited Kingdom.

Endorsement notice

The text of the International Standard ISO 4624 : 2002 was approved by CEN as a European Standard withoutany modification.

NOTE: Normative references to international publications are listed in Annex ZA (normative).

3

3

3

4

4

66

7

7

10

10

11

12

12

NormCD-Issue2007-03


5/15

Page 3EN ISO 4624 : 2003

NormCD-Issue2007-03


6/15

Page 4EN ISO 4624 : 2003

NormCD-Issue2007-03


7/15

Page 5EN ISO 4624 : 2003

NormCD-Issue2007-03


8/15

Page 6EN ISO 4624 : 2003

NormCD-Issue2007-03


9/15

Page 7EN ISO 4624 : 2003

NormCD-Issue2007-03


10/15

Page 8EN ISO 4624 : 2003

NormCD-Issue2007-03


11/15

Page 9EN ISO 4624 : 2003

NormCD-Issue2007-03


12/15

Page 10EN ISO 4624 : 2003

NormCD-Issue2007-03


13/15

Page 11EN ISO 4624 : 2003

NormCD-Issue2007-03


14/15

Page 12EN ISO 4624 : 2003

NormCD-Issue2007-03


15/15

Page 13EN ISO 4624 : 2003

NormCD-Issue2007-03

En ISO 4624 - Pull-Off Test for Adhesion

Documents

Transcript of En ISO 4624 - Pull-Off Test for Adhesion