EMC Standard.pdf

8/9/2019 EMC Standard.pdf

1/58


2/58


3/58


4/58

DD ENV 1954:1997 Internal and external fault behaviour of safety related electronicparts of gas appliances

BS EN 12015:1998 Electromagnetic compatibility. Product family standard for lifts,escalators and passenger conveyors. Emission

BS EN 12016:1998 Electromagnetic compatibility. Product family standard for lifts,escalators and passenger conveyors. Immunity

BS EN 12182:1999 Technical aids for disabled persons. General requirements andtest methods

BS EN 12184:1999 Electrically powered wheelchairs, scooters and their chargers.Requirements and test methods

BS EN 12368:2000 Traffic control equipment. Signal heads BS EN 12414:1999 Vehicle parking control equipment. Pay and display ticket

machine. Technical and functional requirements BS EN 12523:1999 External limb prostheses and external orthoses. Requirements

and test methods DD ENV 12646:1997 Bar coding. Test specifications for bar code scanners and

decoders

DD ENV 12647:1997 Bar coding. Test specifications for bar code verifiers BS EN 12830:1999 Temperature recorders for the transport, storage and distribution

of chilled, frozen, deep-frozen/quick-frozen food and ice cream.Tests, performance and suitability

BS EN 12895:2000 Industrial trucks. Electromagnetic compatibility BS EN 12919:1999 Workplace atmospheres. Pumps for the sampling of chemical

agents with a volume flow rate of over 51/min. Requirements andtest methods

BS EN 12957:2001 Machine tools. Safety. Electro discharge machines BS EN 13309:2000 Construction machinery. Electromagnetic compatibility of

machines with internal electrical power supply

BS EN 45502-1:1998 Active implantable medical devices. General requirements forsafety, marking and information to be provided by themanufacturer

BS EN 45510-8-1:1998 Guide for the procurement of power station equipment. Controland instrumentation

BS EN 50057:1999 Electrical apparatus for the detection and measurement ofcombustible gases. Performance requirements for Group IIapparatus indicating up to 100% lower explosive limit

BS EN 50081-1:1992 Electromagnetic compatibility. Generic emission standard.Residential, commercial and light industry

BS EN 50081-2:1994 Electromagnetic compatibility. Generic emission standard.Industrial environment

BS EN 50082-1:1992 Electromagnetic compatibility. Generic immunity standard.Residential, commercial and light industry

BS EN 50082-1:1998 Electromagnetic compatibility. Generic immunity standard.Residential, commercial and light industry

BS EN 50083-2:2001 Cabled distribution systems for television and sound signals.Electromagnetic compatibility for equipment

BS EN 50083-8:2002 Cabled distribution systems for television and sound signals.Electromagnetic compatibility for networks

BS EN 50085-1:1999 Cable trunking and cable ducting systems for electricalinstallations. General requirements

BS EN 50090-2-2:1997 Home and Building Electronic Systems (HBES). System overview.

General technical requirements


5/58

BS EN 50090-8:2001 Home and Building Electronic Systems (HBES). Conformityassessment of products

BS EN 50091-1:1993 Specification for uninterruptible power systems (UPS). Generaland safety requirements

BS EN 50091-2:1996 Specification for uninterruptible power systems (UPS). EMCrequirements

BS EN 50104:1999 Electrical apparatus for the detection and measurement of oxygen.Performance requirements and test methods

BS EN 50121-1:2000 Railway applications. Electromagnetic compatibility. General

BS EN 50121-2:2000 Railway applications. Electromagnetic compatibility. Emission ofthe whole railway system to the outside world

BS EN 50121-3-1:2000 Railway applications. Electromagnetic compatibility. Rolling stock.Train and complete vehicle

BS EN 50121-3-2:2000 Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus

BS EN 50121-4:2000 Railway applications. Electromagnetic compatibility. Emission andimmunity of the signalling and telecommunications apparatus

BS EN 50121-5:2000 Railway applications. Electromagnetic compatibility. Emission andimmunity of fixed power supply installations and apparatus

BS EN 50130-4:1996 Alarm systems. Electromagnetic compatibility. Product familystandard: Immunity requirements for components of fire, intruderand social alarm systems

BS EN 50131-1:1997 Alarm systems. Intrusion systems. General requirements

BS EN 50136-2-1:1998 Alarm systems. Alarm transmission systems and equipment.General requirements for alarm transmission equipment

DD ENV 50141:1994 Electromagnetic compatibility. Basic immunity standard.

Conducted disturbances induced by radio-frequency fields.Immunity test DD ENV 50142:1995 Electromagnetic compatibility. Basic immunity standard. Surge

immunity tests BS EN 50147-1:1997 Anechoic chambers. Shield attenuation measurement

BS EN 50147-2:1997 Anechoic chambers. Alternative test site suitability with respect tosite attenuation

BS EN 50165:1997 Electrical equipment of non-electric appliances for household andsimilar purposes. Safety requirements

BS EN 50178:1998 Electronic equipment for use in power installations BS EN 50199:1996 Electromagnetic compatibility (EMC). Product standard for arc

welding equipment DD ENV 50204:1996 Radiated electromagnetic field from digital radio telephones.Immunity test

BS EN 50215:1999 Railway applications. Testing of rolling stock after completion ofconstruction and before entry into service

BS EN 50227:1999 Control circuit devices and switching elements proximity sensors,d.c. interface for proximity sensors and switching amplifiers(NAMUR)

BS EN 50241-2:1999 Specification for open path apparatus for the detection ofcombustible or toxic gases and vapours. Performancerequirements for apparatus for the detection of combustible gases

BS EN 50263:2000 Electromagnetic compatibility (EMC). Product standard formeasuring relays and protection equipment


6/58

BS EN 50270:1999 Electromagnetic compatibility. Electrical apparatus for thedetection and measurement of combustible gases, toxic gases oroxygen

BS EN 50289-1-6:2002 Communication cables. Specifications for test methods. Electricaltest methods. Electromagnetic performance

BS EN 50289-1-11:2002 Communication cables. Specifications for test methods. Electricaltest methods. Characteristic impedance, input impedance, returnloss

BS EN 50293:2001 Electromagnetic compatibility. Road traffic signal systems.Product standard

BS EN 50295:1999 Low-voltage switchgear and controlgear. Controller and deviceinterface systems. Actuator sensor interface (AS-i)

BS EN 50310:2000 Application of equipotential bonding and earthing in buildings withinformation technology equipment

BS EN 50319:1999 Proximity devices. Requirements for proximity devices withanalogue output

BS EN 50325-1:2001 Industrial communication subsystem based on ISO 11898 (CAN)for controller-device interfaces. General requirements

BS EN 50325-3:2001 Industrial communication subsystem based on ISO 11898 (CAN)for controller-device interfaces. Smart distributed systems (SDS)

BS EN 55014-1:1997 Electromagnetic compatibility. Requirements for householdappliances, electric tools and similar apparatus. Emission. Productfamily standard

BS EN 55014-1:2001 Electromagnetic compatibility. Requirements for householdappliances, electric tools and similar apparatus. Emission

BS EN55014-2:1997*CISPR14-2:1997

Electromagnetic compatibility. Requirements for householdappliances, electric tools and similar apparatus. Immunity. Productfamily standard

BS EN 55015:1996*CISPR15:1996

Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment

BS EN 55020:2002 Sound and television broadcast receivers and associatedequipment. Immunity characteristics. Limits and methods ofmeasurement

BS EN 55022:1998*CISPR22:1997

Information technology equipment. Radio disturbancecharacteristics. Limits and methods of measurement

BS EN 55024:1998*CISPR24:1997

Information technology equipment. Immunity characteristics.Limits and methods of measurement

BS EN 55103-1:1997 Electromagnetic compatibility. Product family standard for audio,video, audio-visual and entertainment lighting control apparatusfor professional use. Emission

BS EN 55103-2:1997 Electromagnetic compatibility. Product family standard for audio,video, audio-visual and entertainment lighting control apparatusfor professional use. Immunity

BS EN 60034-1:1998 Rotating electrical machines. Rating and performance

BS EN 60118-13:1998*IEC60118-13:1997

Hearing aids. Electromagnetic compatibility (EMC). Productstandard

BS EN 60204-1:1993 Safety of machinery. Electrical equipment of machines.Specification for general requirements

BS EN 60204-31:1998 Safety of machinery. Electrical equipment of machines. Particularsafety and EMC requirements for sewing machines, units and


7/58

systems

BS EN 60255-22-6:2001 Electrical relays. Electrical disturbance tests for measuring relaysand protection equipment. Immunity to conducted disturbancesinduced by radio frequency fields

BS EN 60255-25:2000*IEC60255-25:2000

Electrical relays. Electromagnetic emission tests for measuringrelays and protection equipment

BS EN 60309-1:1999*IEC60309-1:1999

Plugs, socket-outlets and couplers for industrial purposes.General requirements

BS EN 60315-7:1996*BS4054-7:1996*IEC60315-7:1995

Methods of measurement on radio receivers for various classes ofemission. Methods of measurement on digital satellite radio (DSR)receivers

BS EN 60320-2-2:1999 Appliance couplers for household and similar general purposes.Specification of requirements for individual types of coupler.

Interconnection couplers for household and similar equipment BS EN 60398:1999*IEC60398:1999

Industrial electroheating installations. General test methods

BS EN 60439-1:1999*IEC60439-1:1999

Specification for low-voltage switchgear and controlgearassemblies. Type-tested and partially type-tested assemblies

BS EN 60495:1994*IEC60495:1993

Single sideband power-line carrier terminals

BS EN60601-1-2:2002*IEC60601-1-2:2002

Medical electrical equipment. General requirements for safety.Collateral standard. Electromagnetic compatibility. Requirementsand tests

BS EN 60601-2-7:1998*BS5724-2.7:1998*IEC60601-2-7:1998

Medical electrical equipment. Particular requirements for safety.Specification for high voltage generators of diagnostic X-raygenerators

BS EN60601-2-18:1997*BS5724-2.18:1997*IEC60601-2-18:1996

Medical electrical equipment. Particular requirements for safety.Specification for endoscopic equipment

BS EN60601-2-19:1997*BS

5724-2.119:1997*IEC60601-2-19:1990

Medical electrical equipment. Particular requirements for safety.Specification for baby incubators

BS EN60601-2-24:1998*BS5724-2.124:1998*IEC60601-2-24:1998

Medical electrical equipment. Particular requirements for safety.Particular requirements for the safety of infusion pumps andcontrollers

BS EN60601-2-35:1997*BS5724-2.35:1997*IEC60601-2-35:1996

Medical electrical equipment. Particular requirements for safety.Specification for blankets, pads and mattresses intended forheating in medical use

BS EN60601-2-36:1997*IEC60601-2-36:1997*BS5724-2.36:1997

Medical electrical equipment. Particular requirements for safety.Specification for equipment for extra-corporeally inducedlithotripsy


8/58

BS EN60601-2-40:1998*IEC60601-2-40:1998*BS5724-2.40:1998

Medical electrical equipment. Particular requirements for safety.Specification for electromyographs and evoked responseequipment

BS EN60601-2-46:1998*IEC60601-2-46:1998*BS5724-2.46:1998

Medical electrical equipment. Particular requirements for safety.Specification for operating tables

BS EN 60669-1:2000*BS3676-1:2000

Switches for household and similar fixed electrical installations.General requirements

BS EN60669-2-2:1998*IEC60669-2-2:1996

Switches for household and similar fixed electrical installations.Particular requirements. Remote-control switches (RCS)

BS EN 60687:1993*IEC60687:1992

Specification for alternating current static watt-hour meters foractive energy (classes 0,2 S and 0,5 S)

BS EN 60799:1998*IEC60799:1998

Electrical accessories. Cord sets and interconnection cord sets

BS EN 60801-2:1993*IEC60801-2:1991

Electromagnetic compatibility for industrial-process measurementand control equipment. Electrostatic discharge requirements

BS EN 60831-1:1998*IEC60831-1:1996

Shunt power capacitors of the self-healing type for a.c. systemshaving a rated voltage up to and including 1000 V. General.Performance, testing and rating. Safety requirements. Guide forinstallation and operation

BS EN 60868:1993 Flickermeter. Functional and design specifications BS EN

60870-2-1:1996*IEC60870-2-1:1995

Telecontrol equipment and systems. Operating conditions. Power

supply and electromagnetic compatibility

BS EN 60931-1:1998*IEC60931-1:1996

Shunt power capacitors of the non-self-healing type for a.c.systems having a rated voltage up to and including 1000 V.General. Performance, testing and rating. Safety requirements.Guide for installation and operation

BS EN 60945:1997*IEC60945:1996

Maritime navigation and radiocommunication equipment andsystems. General requirements. Methods of testing and requiredtest results

BS EN 60947-3:1999 Specification for low-voltage switchgear and controlgear.Switches, disconnectors, switch-disconnectors andfuse-combination units

BS EN 60947-5-1:1998 Specification for low-voltage switchgear and controlgear. Controlcircuit devices and switching elements. Electromechanical controlcircuit devices

BS EN 61000-2-2:2002 Electromagnetic compatibility (EMC). Environment. Compatibilitylevels for low-frequency conducted disturbances and signalling inpublic low-voltage power supply systems

BS EN 61000-2-4:2002 Electromagnetic compatibility (EMC). Environment. Compatibilitylevels in industrial plants for low-frequency conducteddisturbances

BS EN61000-2-9:1996*IEC61000-2-9:1996

Electromagnetic compatibility (EMC). Environment. Description ofHEMP environment. Radiated disturbance. Basic EMC publication


9/58

BS EN61000-2-10:1999*IEC61000-2-10:1998

Electromagnetic compatibility (EMC). Environment. Description ofHEMP environment. Conducted disturbance

BS EN61000-3-2:2001*IEC61000-3-2:2000

Electromagnetic compatibility (EMC). Limits. Limits for harmoniccurrent emissions (equipment input current up to and including 16

A per phase) BS EN61000-3-3:1995*IEC61000-3-3:1994

Electromagnetic compatibility (EMC). Limits. Limitation of voltagechanges, voltage fluctuations and flicker in public low-voltagesupply systems, for equipment with rated current 16 A perphase and not subject to conditional connection

BS EN61000-3-11:2001*IEC61000-3-11:2000

Electromagnetic compatibility (EMC). Limits. Limitation of voltagechanges, voltage fluctuations and flicker in public low-voltagesupply systems. Equipment with rated voltage current 75 Aand subject to conditional connection

BS EN61000-4-1:1995*IEC61000-4-1:1992

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Overview of immunity tests. Basic EMC publication

BS EN61000-4-1:2001*IEC61000-4-1:2000

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Overview of IEC 61000-4 series

BS EN61000-4-2:1995*IEC61000-4-2:1995

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Electrostatic discharge immunity test. Basic EMCpublication

BS EN 61000-4-3:2002 Electromagnetic compatibility (EMC). Testing and measurementtechniques. Radiated, radio-frequency, electromagnetic fieldimmunity test

BS EN61000-4-4:1995*IEC61000-4-4:1995

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Electrical fast transient/burst immunity test. BasicEMC publication

BS EN61000-4-5:1995*IEC61000-4-5:1995

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Surge immunity test

BS EN61000-4-6:1996*IEC61000-4-6:1996

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Immunity to conducted disturbances, induced byradio-frequency fields

BS EN61000-4-7:1993*IEC61000-4-7:1991

Electromagnetic compatibility (EMC). General guide on harmonicsand interharmonics measurements and instrumentation, for powersupply systems and equipment connected thereto

BS EN61000-4-8:1994*IEC61000-4-8:1993

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Power frequency magnetic field immunity test. BasicEMC publication

BS EN61000-4-9:1994*IEC61000-4-9:1993

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Pulse magnetic field immunity test. Basic EMCpublication

BS EN61000-4-10:1994*IEC61000-4-10:1993

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Damped oscillatory magnetic field immunity test.Basic EMC publication

BS EN 61000-4-11:1994 Electromagnetic compatibility (EMC). Testing and measurementtechniques. Voltage dips, short interruptions and voltagevariations immunity tests

BS EN61000-4-12:1996*IEC61000-4-12:1995

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Oscillatory waves immunity test. Basic EMCpublication


10/58

BS EN61000-4-13:2002*IEC61000-4-13:2002

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Harmonics and interharmonics including mainssignalling at a.c. power port, low frequency immunity tests

BS EN61000-4-14:1999*IEC61000-4-14:1999

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Voltage fluctuation immunity test

BS EN61000-4-15:1998*IEC61000-4-15:1997

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Flickermeter. Functional and design specifications.Basic EMC publication

BS EN61000-4-16:1998*IEC61000-4-16:1998

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Test for immunity to conducted, common modedisturbances in the frequency range 0 Hz to 150 kHz

BS EN61000-4-17:1999*IEC61000-4-17:1999

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Ripple on d.c. input power port immunity test

BS EN61000-4-23:2001*IEC

61000-4-23:2000

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Test methods for protective devices for HEMP and

other radiated disturbances BS EN61000-4-24:1997*IEC61000-4-24:1997

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Test methods for protective devices for HEMPconducted disturbance. Basic EMC publication

BS EN61000-4-25:2002*IEC61000-4-25:2001

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Testing and measurement techniques. HEMPimmunity test methods for equipment and systems

BS EN61000-4-27:2001*IEC61000-4-27:2000

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Unbalance, immunity test

BS EN61000-4-28:2000*IEC61000-4-28:1999

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Variation of power frequency, immunity test

BS EN61000-4-29:2001*IEC61000-4-29:2000

Electromagnetic compatibility (EMC). Testing and measurementtechniques. Testing and measurement techniques. Voltage dips,short interruptions and voltage variations on d.c. input power portimmunity tests

BS EN61000-5-5:1996*IEC61000-5-5:1996

Electromagnetic compatibility (EMC). Installation and mitigationguidelines. Specification of protective devices for HEMPconducted disturbance. Basic EMC publication

BS EN 61000-5-7:2001 Electromagnetic compatibility (EMC). Installation and mitigationguidelines. Installation and mitigation guidelines. Degrees ofprotection by enclosures against electromagnetic disturbances(EM code)

BS EN 61000-6-1:2001 Electromagnetic compatibility (EMC). Generic standards.Immunity for residential, commercial and light-industrialenvironments

BS EN61000-6-2:1999*IEC61000-6-2:1999

Electromagnetic compatibility (EMC). Generic standards.Immunity for industrial environments

BS EN 61000-6-2:2001 Electromagnetic compatibility (EMC). Generic standards.Immunity standard for industrial environments

BS EN 61000-6-3:2001 Electromagnetic compatibility (EMC). Generic standards.Emission standard for residential, commercial and light-industrialenvironments

BS EN 61000-6-4:2001 Electromagnetic compatibility (EMC). Generic standards.Emission standard for industrial environments


11/58

BS EN61076-4-103:1999*IEC61076-4-103:1999

Connectors with assessed quality, for use in d.c., low-frequencyanalogue and in digital high speed data applications. Printed boardconnectors. Detail specification for two-part connectors withshielding and a basic grid of 2,5 mm

BS EN 61204-3:2001*IEC61204-3:2000

Low voltage power supplies, d.c. output. Electromagneticcompatibility (EMC)

BS EN 61242:1998 Electrical accessories. Cable reels for household and similarpurposes

BS EN 61268:1996*IEC61268:1995

Alternating current static var-hour meters for reactive energy(classes 2 and 3)

BS EN 61316:2000*IEC61316:1999

Industrial cable reels

BS EN 61326:1998*IEC61326-1:1997

Electrical equipment for measurement, control and laboratory use.EMC requirements

BS EN 61362:1998 Guide to specification of hydroturbine control systems BS EN 61400-2:1996*IEC61400-2:1996

Wind turbine generator systems. Safety of small wind turbines

BS EN 61496-1:1998*IEC61496-1:1997

Safety of machinery. Electro-sensitive protective equipment.General requirements and tests

BS EN 61543:1996 Residual current-operated protective devices (RCDs) forhousehold and similar use. Electromagnetic compatibility

BS EN 61547:1996*IEC61547:1995

Specification for equipment for general lighting purposes. EMCimmunity requirements

BS EN 61557-1:1997*IEC61557-1:1997

Electrical safety in low voltage distribution systems up to 1000 Va.c. and 1500 V d.c. Equipment for testing, measuring ormonitoring of protective measures. General requirements

BS EN 61800-3:1997 Adjustable speed electrical power drive systems. EMC productstandard including specific test methods

BS EN 61812-1:1997*IEC61812-1:1996

Specified time relays for industrial use. Requirements and tests

BS EN 61851-21:2002 Electric vehicle conductive charging system. Electric vehiclerequirements for conductive connection to an a.c./d.c. supply

BS EN 62053-31:1999*IEC62053-31:1998

Electricity metering equipment (a.c.). Particular requirements.Pulse output devices for electromechanical and electronic meters(two wires only)

BS CISPR16-1:1999*CISPR16-1:1999

Specification for radio disturbance and immunity measuringapparatus and methods. Radio disturbance and immunitymeasuring apparatus

BS CISPR16-2:1996*CISPR16-2:1996

Specification for radio disturbance and immunity measuringapparatus and methods. Methods of measurement ofdisturbances and immunity

BS CISPR 16-3:2000 Specification for radio disturbance and immunity measuringapparatus and methods. Reports and recommendations of CISPR

BS CISPR 16-4:2002 Specification for radio disturbance and immunity measuringapparatus and methods. Uncertainty in EMC measurements


12/58

DISC PD 1001:1996 A guide to electromagnetic compatibility and structured cabling

TH 42056 CE Marking for Electromagnetic Compatibility. A guide to the EMCDirective

TH 42071 EMC for IT and Related Equipment in the USA. A guide to therequirements for digital devices

88/33378 DC Amendment No. 3 to BS 6513. Wideband cabled distributionsystems. Part 2. Methods of measurement

91/22443 DC Electromagnetic compatibility (EMC) for secondary systems ingas-insulated metal-enclosed switchgear for rated voltages of 72.5kV and above [17C(Secretariat)102]

92/20257 DC IEC 1000-2-XXXX. Environment. Compatibility levels forlow-frequency conducted disturbances and signalling in publicmedium-voltage power supply systems [77(Sec)113]

92/29256 DC Characterization and classification of the asymmetricaldisturbance source induced in telephone-subscriber lines by AMbroadcasting transmitters in the LW, MW and SW bands

[CISPR/A(SEC)128]

92/33163 DC Signalling on low-voltage electrical installations in the frequencyrange 3 kHz to 148.5 kHz. Part 2. Immunity from interference [CLC105(Secretariat)66]

92/78601 DC Aerospace series. Static inverters for aircraft. General standard(prEN 3700)

93/705955 DC Road vehicles. Electrical disturbances by narrow band radiatedelectromagnetic energy. Component test methods. Part 1.General and definitions. Part 2. Absorber lined chamber. Part 3.Transverse electromagnetic mode (TEM) cell. Part 4. Bulk currentinjection

93/711458 DC [IEC/45B(Secretariat)120] Direct reading personal doseequivalent and/or dose equivalent rate monitors for X, gamma,

high energy beta and neutron radiations 94/202677 DC IEC 654-5. Operating conditions for industrial-processmeasurement and control. Part 5. Electromagnetic compatibility[65A(Secretariat)155] (possible new British Standard BS EN60654-5)

94/203050 DC International standard IEC 1000-4-Y. Electromagneticcompatibility (EMC). Part 4. Testing and measuring techniques.Section Y. RF emissions from digital radio telephones immunitytest. Basic EMC publication [77B(Sec)136] (possible new BritishStandard)

94/206372 DC Amendment to International Standard. Additional terms to IEVChapter 161, Publication 50(161) (1990)(08). Electromagneticcompatibility (1/77/CISPR(IEV 161)(Sec)1451/157/1066)

(possible amendment to BS 4727:Part 1:Group 09) 94/507475 DC BS ISO 12016. Passenger cars. Alarm systems (ISO/DIS 12016) 94/705161 DC Road vehicles. Electrical disturbances by narrow-band radiated

electromagnetic energy. Component test methods. Part 6. Parallelplate antenna (ISO/DIS 11452-6)

95/200129 DC prEN 50220. Generic standard for hearing aids 95/204625 DC Draft Amendment to International Standard IEC 50 (International

Electrotechnical Vocabulary) Chapter 161:Electromagneticcompatibility:1990 (1/1534/CD)

95/206188 DC IEC 1326-20. EMC requirements for electrical equipment formeasurement, control and laboratory use. Part 20. Particularrequirements for equipment used in laboratories or test and

measurement areas with a restricted electromagnetic environment(65A/176/C


13/58

95/206189 DC IEC 1326-30. EMC requirements for electrical equipment formeasurement, control and laboratory use. Part 30. Particularrequirements for portable test and measurement equipment that ispowered by battery or from the measured circuit (65A/177/CD)

95/207614 DC prEN 50217. EMC. Standard for in-situ emission measurements 95/208221 DC Radio interference from electric traction systems. CISPR/C/77/CD95/208740 DC IEC 1000-4-20 Electromagnetic compatibility (EMC). Part

4.Testing and measurement techniques. Section 20.TEM cells(77B/153/CD)

95/209012 DC IEC 1000-4-4. Electromagnetic compatibility (EMC). Part 4.Testing and measurement techniques. Section 4. Electricalfast/transient burst immunity test (77B/154/CD)

95/210789 DC IEC 1000-5-6. Electromagnetic compatibility (EMC). Part 5.Mitigation methods and installation guidelines. Section 6.Mitigation of external influences. Technical report type II(77B/157/CD)

95/212958 DC prEN 50226. Electromagnetic compatibility of rechargeable cellsor batteries

95/215048 DC Technical report CISPR XY. Predictability of radiation in verticaldirection. Part 1. Frequencies above 30 MHz. Technical reporttype 3 (CISPR/A/166/CD)

96/105749 DC Earth-moving machinery. Electromagnetic compatibility 96/201399 DC prEN 60255-1-00. All-or-nothing electrical relays (IEC

255-1-00:1975, modified) 96/208116 DC prEN 50236. Electromagnetic compatibility for power transformers96/210384 DC Application guide to the European Standard EN 50160 on "Voltage

characteristics of electricity supplied by public distributionsystems" (CLC/BTTF 68-6(Sec)7

96/210385 DC Measurement guide for voltage characteristics (CLC/BTTF 68-6(SEC)8)

96/210905 DC

Technical Report Type 3. Introduction to EMC screeningmeasurements of cables, cable assemblies and connectors.(46A/267/CDV)

96/211109 DC Limits relating to the influence of electric power supply and tractionsystems on telecommunications systems (CLC/TC 210(SEC)24)

96/211110 DC Basic standard for the calculation and measurement methodsrelating to the influence of electric power supply and tractionsystems on telecommunication systems (CLC/TC 210(SEC)23)

96/215334 DC Amendment 1 to IEC 1540. Requirements for electromagneticcompatibility of PRCDs (IEC 23E/276/CD)

96/215335 DC Amendment 1 to IEC 1543. Electromagnetic compatibility of RCDs(IEC 23E/277/CD)

96/216040 DC HEMP protection concepts. IEC/77C/39/CD 96/562496 DC BS 5724.Part 1.Section 1.2. Medical electrical equipment. Part 1.General requirements for safety. 2. Collateral standard.Electromagnetic compatibility. Requirements and tests

97/200727 DC Recommendations for shielded enclosures. Selection of shieldingmaterials, components and filters (CLC/TC 210(SEC)33/34)

97/200728 DC EMC conformity of equipment designed for military and otherpurposes (CLC/TC210(SEC)35/36)

97/200935 DC IEC 364. Electrical installations of buildings. Part 5. Selection anderection of electrical equipment. Revision of Chapter 54. Earthingarrangements and protective conductors (IEC 64/913/CD)

97/202102 DC IEC 1000-2-11. Electromagnetic compatibility (EMC). Part 2.Environment. Section 11. Classification of HEMP environment.77C/141/CD


14/58

97/206256 DC IEC 297-5. Dimensions of mechanical structures of the 482.6 mm(19 inch) series. Part 5. Subracks and associated plug-in for EMC,ESD injector/extractor. Keying etc. for IEC 603-2 connectors (IECdocument 48D/119/CD)

97/207175 DC IEC 61921. Low-voltage automatic power factor correction banks(IEC Document 33/269/CD)

97/209093 DC IEC 62040/ED.1. Uninterruptible compatibility (EMC)requirements (IEC Document 22B/107/CD)

97/210493 DC IEC 62041. First edition. Small power transformers, power supplyunits and similar devices. EMC requirements (IEC Document96/105/CD)

97/230888 DC IEC 61820. Electrical installation for lighting and beaconing ofaerodromes. Constant current series circuits for aeronauticalground lighting (IEC document 97/30/CD)

97/260450 DC IEC 61000-4-7. Electromagnetic compatibility (EMC). Part 4.Testing and measurement techniques. Section 7. General guideon harmonics and interharmonics measurements andinstrumentation, for power supply systems and equipmentconnected thereto (IEC/77A/1

97/260469 DC IEC 61000-3-9. Electromagnetic compatibility (EMC). Part 3-9.Limits for interharmonic current emissions (equipment with inputpower 16 A per phase and prone to produce interharmonicsby design) IEC/77A/196/CD

97/260470 DC IEC 61000-4-31. Electromagnetic compatibility (EMC). Part 4.Testing and measurement techniques. Section 31. Measurementsin the frequency range 2 kHz to 9 kHz. Basic EMC standard (IEC77A/198/CD)

97/261916 DC IEV Chapter 445. Specified time all-or-nothing relays(IEC/1/1684/CD)

97/706849 DC Nuclear power plants. Instrumentation. Methods and criteria for

electromagnetic interference testing (IEC 61503, Ed 1)

97/720195 DC Aerospace series. Design of electromagnetic hazard protection ofcivil aircraft. Part 3. Guide to clearance and testing (BS G 257:Part3)

98/103952 DC BS EN 12209-3. Building hardware. Locks and latches. Part 3.Electromechanically operated locks and striking plates.Requirements and test methods (prEN 12209-3:1998)

98/230449 DC prEN 133200:1998. Sectional specification. Passive filter units forelectromagnetic interference suppression (filters for which safetytests are required)

98/230450 DC prEN 133201:1998. Blank detail specification. Passive filter unitsfor electromagnetic interference suppression. Filters for which

safety tests are required 98/230451 DC prEN 133221:1998. Blank detail specification. Passive filter units

for electromagnetic interference suppression. Filters for whichsafety tests are required

98/232755 DC IEC 61936-1. Power installations exceeding 1 kV a.c. Part 1.Common rules (IEC document 99/35/CD)

98/262449 DC IEC 61131-2. Ed.2. Programmable controllers. Part 2. Equipmentrequirements and tests (IEC/65B/350/CD

98/263857 DC CISPR 21. Ed. 2. Interference to mobile radiocommunications inthe presence of impulsive noise. Methods of judging degradationand measures to improve performance (IEC/CISPR/D/210/CDV)

98/706158 DC Automatic gas burner control systems for gas burners and gasburning appliances with or without fans


15/58

98/717438 DC Road vehicles. Vehicle test methods for electrical disturbances bynarrowband radiated electromagnetic energy. Part 1. General anddefinitions

98/717439 DC Road vehicles. Component test methods for electricaldisturbances by narrowband radiated electromagnetic energy.Part 1. General and definitions

98/717440 DC Road vehicles. Component test methods for electricaldisturbances by narrowband radiated electromagnetic energy.Part 3. Transverse electromagnetic mode (TEM) cell

98/717441 DC Road vehicles. Component test methods for electricaldisturbances by narrowband radiated electromagnetic energy.Part 4. Bulk current injection (BCI)

99/201076 DC EN 61800-3 prA.1.1. Adjustable speed electrical power drivesystems. Part 3. EMC product standard including specific testmethods (CENELEC document CLC/TC 22X(secretariat)40)

99/202534 DC prEN 50323. General requirements for hearing aids 99/202943 DC IEC 60728-12. Ed. 1. Cable distribution systems for television and

sound signals. Part 12. Electromagnetic compatibility of systems(IEC document 100D/64/CDV)

99/203890 DC BS EN 50065-2-1. Signalling on low-voltage electrical installationsin the frequency range 3 kHz to 148,5 kHz. Part 2-1. Immunityrequirements for mains communications equipment and systemsoperating in the range of frequencies 95 kHz to 148,5 kHz and in

99/240907 DC BS EN 50314-2. Photovoltaic systems. Charge regulators. Part 2.EMC. Test requirements and procedures

99/240936 DC BS EN 50316-2. Photovoltaic lighting systems. Part 2. EMC. Testrequirements and procedures

99/240937 DC BS EN 50316-3. Photovoltaic lighting systems. Part 3.Performance. Test requirements and procedures

99/240938 DC BS EN 50322-1. Photovoltaic systems. Part 1. Electromagneticcompatibility (EMC). Requirements for photovoltaic pumpingsystems

99/240940 DC BS EN 50331-1. Photovoltaic systems in buildings. Part 1. Safetyrequirements

99/241076 DC IEC 61000-4-21. Electromagnetic compatibility (EMC). Part 4-21.Testing and measurement techniques. Reverberation chambers

99/241380 DC IEC 61000-6-5. Electromagnetic compatibility (EMC). Part 6-5.Generic standards. Immunity for power station and substationenvironments (IEC document 77/215/CD)

99/243697 DC Electromagnetic compatibility (EMC). Part 4-13. Testing andmeasurement techniques. Harmonics and interharmonics,

including mains signalling at a.c. power port, low frequencyimmunity tests. Basic EMC publication (IEC document77A/291/CD)

99/245066 DC IEC 61000-4-30. Electromagnetic compatibility (EMC). Part 4-30.Testing and measurement techniques. Power qualitymeasurement methods (IEC Document 77A/301/CD)

99/563276 DC ISO 7176-21. Wheelchairs. Part 21. Requirements and testmethods for electromagnetic compatibility of electronicallypowered wheelchairs and motorized scooters

99/712285 DC prEN 13646. Building control systems. Equipment characteristics 99/712286 DC prEN ISO 16484-1. Building control systems. Part 1. Overview and

definitions (ISO/DIS 16484-1:1999)

99/716810 DC ISO CD 14302. Space systems. Electromagnetic compatibilityrequirements


16/58

00/203618 DC IEC 60255-26. Measuring relays and protection equipment. Part26. Electromagnetic compatibility requirements for measuringrelays and protection equipment (IEC Document 95/99/CD)

00/203722 DC IEC 60118-13. Ed.2. Hearing aids. Part 13: Electromagneticcompatibility (EMC). Product standard

00/241586 DC Electromagnetic compatibility (EMC). Part 3-2. Limits. Limits forharmonic current emissions (equipment input current up to andincluding 16A per phase)

00/244020 DC IEC 61800-3 Ed. 2. Adjustable speed electrical power drivesystems. Part 3: EMC requirements product standard includingspecific test methods

00/244985 DC IEC 61000-3-12. Electromagnetic compatibility (EMC). Part 3-12.Limits for harmonic currents produced by equipment connected topublic low voltage systems with input current 75 A per phaseand subject to restricted connection [IEC Document 77A/325/C

00/246907 DC BS EN 61980-1. Electrical. Electric vehicle inductive chargingsystems. Part 1: General requirements (IEC Document69/125/CD)

00/645282 DC EN 50090-9-1. Home and Building Electronic Systems ( HBES).Part 9-1. Installation requirements. Generic cabling for HBESclass 1 twisted pair

00/705404 DC IEC 60474-10. Arc welding equipment. Part 10. EMCrequirements

00/709272 DC ISO/DIS 7637-1. Road vehicles. Electrical interference byconduction and coupling. Part 1. Definitions and generalconsiderations

00/709873 DC ISO/DIS 11452-5. Road vehicles. Component test methods forelectrical disturbances by narrowband radiated electromagneticenergy. Part 5. Stripline

00/712056 DC ISO/DIS 10605. Road vehicles. Test methods for electricaldisturbances from electrostatic discharge

01/200383 DC IEC 61000-4-6. Ed.2. Electromagnetic compatibility (EMC). Part4-6: Testing and measurement techniques. Immunity to conducteddisturbances, induced by radio-frequency fields

01/200798 DC IEC 61000-4-2. Ed.2. Electromagnetic compatibility (EMC). Part4-2: Testing and measurement techniques. Electrostatic dischargeimmunity test

01/201291 DC prEN 50370-2. Electromagnetic compatibility (EMC). Productfamily standard for machine tools. Part 2: Immunity

01/204134 DC IEC 62132-1. Ed.1. Integrated circuits. Measurement ofelectromagnetic immunity, 150 kHz to 1 GHz. Part 1: General anddefinitions

01/204271 DC

IEC 61000-1-4. Electromagnetic compatibility (EMC). Part 1-4:Rationale for limiting power-frequency conducted harmonic andinterharmonic current emissions from equipment, in the frequencyrange up to 9 kHz

01/204703 DC IEC 61000-4-20. Ed.1.0. Electromagnetic compatibility (EMC).Part 4-20: Testing and measurement techniques. Emission andimmunity testing in transverse electromagnetic (TEM) waveguides

01/204707 DC IEC 61000-6-6. Electromagnetic compatibility (EMC). Part 6-6:Generic standards. HEMP immunity for indoor equipment

01/205416 DC prEN 50373. Wind turbines. Electromagnetic compatibility 01/205765 DC IEC 61000-4-21. Electromagnetic compatibility (EMC). Part 4:

Testing and measurement techniques. Section 21: Reverberationchamber test methods


17/58


18/58

Amendment 2

CISPR 14-1 Edition 4.2 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 1: Emission /Note: Combines CISPR 14-1 (2000-03), AMD 1 (2001-08) and

AMD 2 (2002-08) CISPR 14-2 Electromagnetic compatibility - Requirements for household

appliances, electric tools and similar apparatus - Part 2: Immunity -Product family standard / Note: This document and its separateamendments continue to be valid together with the consolidated

CISPR 14-2 AMD 1 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 2: Immunity;Product family standard; Amendment 1

CISPR 14-2 Edition 1.1 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 2: Immunity;Product family standard / Note: Combines CISPR 14-2 (1997-02)and AMD 1 (2001-08)

CISPR 15 Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment / Note:This document and its separate amendments continue to be validtogether with the consolidated version

CISPR 15 AMD 1 Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment;

Amendment 1 CISPR 15 AMD 2 Limits and methods of measurement of radio disturbance

characteristics of electrical lighting and similar equipment; Amendment 2

CISPR 15 Edition 6.2 Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment / Note:Combines CISPR 15 (2000-08), AMD 1 (2001-10) and AMD 2(2002-08)

CISPR 16-2 Specification for radio disturbance and immunity measuringapparatus and methods - Part 2: Methods of measurement ofdisturbances and immunity / Note: This document and its separateamendments continue to be valid together with the consolidatedversion

CISPR 16-2 AMD 1 Specification for radio disturbance and immunity measuringapparatus and methods - Part 2: Methods of measurement ofdisturbances and immunity; Amendment 1

CISPR 16-2 AMD 2 Specification for radio disturbance and immunity measuringapparatus and methods - Part 2: Methods of measurement ofdisturbances and immunity; Amendment 2

CISPR 16-2 Edition 1.1 Specification for radio disturbance and immunity measuringapparatus and methods - Part 2: Methods of measurement ofdisturbances and immunity

CISPR 16-2 Edition 1.2 Specification for radio disturbance and immunity measuringapparatus and methods - Part 2: Methods of measurement ofdisturbances and immunity / Note: Combines CISPR 16-2(1996-11), AMD 1 (1999-06) and AMD 2 (2002-08)

CISPR 16-4 Specification for radio disturbance and immunity measuringapparatus and methods - Part 4: Uncertainty in EMCmeasurements

CISPR 24 AMD 1 Information technology equipment - Immunity characteristics -Limits and methods of measurement; Amendment 1

CISPR 24 AMD 2 Information technology equipment - Immunity characteristics -Limits and methods of measurement; Amendment 2 CISPR/A(CO)67 Amendment to CISPR 60016 part 3 section 3: a model for


19/58

calculation of limits CISPR/A/362/CDV*CISPR60016-2 AMD2*CISPR-PN 16-2/A2/f1

Amendment 2 to CISPR 16-2, Ed. 1: Specification for radiodisturbance and immunity measuring apparatus and methods -Part 2: Methods of measurement of disturbances and immunity((a) New subclause 2.3.5: Measurement times and scan rates forcontinuous

CISPR/A/363/CDV*CISPR60016-2 AMD2*CISPR-PN 16-2/A2/f6

Amendment 2 to CISPR 16-2, Ed. 1: Specification for radiodisturbance and immunity measuring apparatus and methods -Part 2: Methods of measurement of disturbances and immunity(Clause 2.6.2.9: Measurements in absorber-lined shieldedenclosures - Uniform

CISPR/A/364/CDV*CISPR60016-2 AMD2*CISPR-PN 16-2/A2/f4

Amendment 2 to CISPR 16-2, Ed. 1: Specification for radiodisturbance and immunity measuring apparatus and methods -Part 2: Methods of measurement of disturbances and immunity(Clause 2.6.2.9: Measurements in absorber-lined shieldedenclosures; Emission

CISPR/A/389/CDV*CISPR61000-4-21*CISPR-PN61000-4-21

Electromagnetic Compatibility (EMC) - Part 4-21: Testing andmeasurement techniques; Reverberation chamber test methods

CISPR/A/419/FDIS*CISPR61000-4-20*CISPR-PN61000-4-20

IEC 61000-4-20: Electromagnetic compatibility (EMC) - Part 4-20:Testing and measurement techniques; Emission and immunitytesting in transverse electromagnetic (TEM) waveguides

CISPR/F/358/CDV*CISPR60015 AMD 3*CISPR-PN15/A3

Amendment 3 to CISPR 15, Ed. 6: Limits and methods ofmeasurement of radio disturbance characteristics of electricallighting and similar equipment (concerns electrodeless lamps)

CISPR/TR 16-3 Specification for radio disturbance and immunity measuringapparatus and methods - Part 3: Reports and recommendations ofCISPR / Note: This document and its separate amendments

continue to be valid together with the consolidated version

CISPR/TR 16-3 AMD 1 Specification for radio disturbance and immunity measuringapparatus and methods - Part 3: Reports and recommendations ofCISPR; Amendment 1

CISPR/TR 16-3 Edition 1.1 Specification for radio disturbance and immunity measuringapparatus and methods - Part 3: Reports and recommendations ofCISPR / Note: Combines CISPR 16-3 (2000-05) and AMD 1(2002-06)*CD-ROM

CISPR/TR 30 Test method on electromagnetic emissions from electronicballasts for single- and double-capped fluorescent lamps

ECMA-328 Detection and measurement of chemical emissions fromelectronic equipment

ECMA/TR 74 A guide to the application of the EMC Directive to ITE TBR 7 Electomagnetic Compatibility and Radio spectrum Matters (ERM)

- European Radio Message System (ERMES) - Receiverrequirements

TBR 23 Electromagnetic Compatibility and Radio Matters (ERM) -Terrestrial Flight Telecommunications System (TFTS) - Technicalrequirements for TFTS

ETR 108 European digital cellular telecommunications system (phase 2);GSM electro magnetic compatibility (EMC) considerations (GSM05.90)

ETR 108/A1 European digital cellular telecommunications system (phase 2);GSM Electro Magnetic Compatibility (EMC) considerations (GSM05.90); Amendment A1

ETR 151 Equipment Engineering (EE) - Electro-Magnetic Compatibility(EMC) testing of telecommunication equipment above 1 GHz


20/58

ETR 238 CENELEC/ETSI standardization programme for the developmentof Harmonized Standards related to Electro-MagneticCompatibility (EMC) in the field of telecommunications

ETR 273-1-1 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 1: Uncertainties in the measurement of mobileradio equipment

ETR 273-1-2 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 1: Uncertainties in the measurement of mobileradio equipment

ETR 273-2 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 2: Anechoic chamber

ETR 273-3 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 2: Anechoic chamber with a ground plane

ETR 273-4 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 4: Open area test site

ETR 273-5 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 5: Striplines

ETR 273-6 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 6: Test fixtures

ETR 273-7 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Improvement of radiated methods of measurement (using testsites) and evaluation of the corresponding measurementuncertainties - Part 7: Artificial human beings

ETR 357 European digital cellular telecommunications system - GSMElectro Magnetic Compatibility (EMC) considerations (GSM 05.90version 5.0.0)

ETS 300065/prA1 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Narrow-band direct-printing telegraph equipment for receivingmeteorological or navigational information (NAVTEX) - Technicalcharacteristics and methods of measurement; Amendment A1

ETS 300113/A1 Radio Equipment and Systems (RES) - Land mobile service -Technical characteristics and test conditions for radio equipmentintended for the transmission of data (and speech) and having anantenna connector; Amendment A1

ETS 300133-1 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 1: Generalaspects

ETS 300133-2 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 2: Serviceaspects

ETS 300133-3 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 3: Network


21/58

aspects

ETS 300133-4 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 4: airinterface specification

ETS 300133-5 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 5: Receiverconformance specification

ETS 300133-6 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 6: Basestation conformance specification

ETS 300133-7 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Enhanced Radio Message System (ERMES) - Part 7: Operationand maintenance aspects

ETS 300135/A1 Radio Equipment and Systems (RES) - Angle-modulated Citizens'Band radio equipment (CEPT PR 27 radio equipment) - Technicalcharacteristics and methods of measurement; Amendment A1

ETS 300162 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Radiotelephone transmitters and receivers for the maritimemobile service operating in VHF bands - Technical characteristicsand methods of measurement

ETS 300224 Electromagnetic compatibility and Radio spectrum Matters (ERM)- On-site paging service - Technical and functional characteristicsfor on-site paging systems, including test methods

ETS 300279 Radio Equipment and Systems (RES) - ElectromagneticCompatibility (EMC) standard for Private land Mobile Radio (PMR)and ancillary equipment (speech and/or non-speech)

ETS 300279/A1 Radio Equipment and Systems (RES) - ElectromagneticCompatibility (EMC) standard for Private land Mobile Radio (PMR)

and ancillary equipment (speech and/or non-speech); Amendment A1 ETS 300296/A1 Radio Equipment and Systems (RES) - Land mobile service -

Technical characteristics and test conditions for radio equipmentusing integral antennas intended primarily for analogue speech;

Amendment A1 ETS 300326-1 Electromagnetic compatibility and Radio spectrum Matters (ERM)

- Terrestrial Flight Telecommunications System (TFTS) - Part 1:Speech services, facilities and requirements

ETS 300326-2 Electromagnetic compatibility and Radio spectrum Matters (ERM)- Terrestrial Flight Telecommunications System (TFTS) - Part 2:Speech services, radio interface

ETS 300326-3

Electromagnetic compatibility and Radio spectrum Matters (ERM)- Terrestrial Flight Telecommunications System (TFTS) - Part 3:Speech services, network aspects

ETS 300329 Radio Equipment and Systems (RES) - ElectromagneticCompatibility (EMC) for Digital Enhanced CordlessTelecommunications (DECT) equipment

ETS 300340 Radio Equipment and Systems (RES) - Electro-MagneticCompatibility (EMC) for European Radio Message System(ERMES) paging receivers

ETS 300340/A1 Radio Equipment and Systems (RES) - ElectromagneticCompatibility (EMC) for European Radio Message System(ERMES) paging receivers; Amendment A1


22/58

ETS 300341/A1 Radio Equipment and Systems (RES) - Land mobile service -Technical characteristics and test conditions for radio equipmentusing an integral antenna transmitting signals to initiate a specificresponse in the receiver; Amendment A1

ETS 300342-1 Radio Equipment and Systems (RES) - ElectromagneticCompatibility (EMC) for European digital cellulartelecommunications system (GSM 900 MHz and DCS 1800 MHz)- Part 1: Mobile and portable radio and ancillary equipment

ETS 300342-2 Radio Equipment and Systems (RES) - Electro-MagneticCompatibility (EMC) for European digital cellulartelecommunications systems (GSM 900 MHz and DCS 1800 MHz)- Part 2: Base station and ancillary equipment

prETS 300342-3 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) for European digital cellulartelecommunications systems (GSM 900 MHz and DCS 1800 MHz)- Part 3: Base station radio and ancillary equipment and repeatersmeeting Phase 2 GSM require

ETS 300385 Radio Equipment and Systems (RES) - ElectroMagnetic

Compatibility (EMC) standard for digital fixed radio links andancillary equipment with data rates at around 2 Mbit/s and above ETS 300385/A1 Radio Equipment and Systems (RES) - ElectroMagnetic

Compatibility (EMC) standard for digital fixed radio links andancillary equipment with data rates at around 2 Mbit/s and above;

Amendment A1 ETS 300386-1Corrigendum

Equipment Engineering (EE) - Public telecommunication networkequipment Electromagnetic Compatibility (EMC) requirements -Part 1: Product family overview, compliance criteria and testlevels; Corrigendum

prETS 300386-2-2 Equipment Engineering (EE) - Public telecommunication networkequipment Electromagnetic Compatibility (EMC) requirements -Part 2: Product specific compliance criteria and operatingconditions - Subpart 2: Transmission equipment

prETS 300386-2-3 Equipment Engineering (EE) - Public telecommunication networkequipment Electromagnetic Compatibility (EMC) requirements -Part 2: Product specific compliance criteria and operatingconditions - Subpart 3: Power supply equipment

prETS 300386-2-4 Equipment Engineering (EE) - Public telecommunication networkequipment Electromagnetic Compatibility (EMC) requirements -Part 2: Product specific compliance criteria and operatingconditions - Subpart 4: Supervisory equipment

ETS 300390/A1 Radio Equipment and Systems (RES) - Land mobile service -Technical characteristics and test conditions for radio equipment

intended for the transmission of data (and speech) and using anintegral antenna; Amendment A1 ETS 300441/prA1 Electromagnetic compatibility and Radio spectrum Matters (ERM)

- Technical characteristics and methods of measurement formaritime radiotelephone watch receivers for the distress andcalling frequency 2182 kHz; Amendment A1

ETS 300445 Radio Equipment and Systems (RES) - Electro-MagneticCompatibility (EMC) standard for wireless microphones andsimilar Radio Frequency (RF) audio link equipment

ETS 300445/A1 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for wireless microphones andsimilar Radio Frequency (RF) audio link equipment; Amendment

A1


23/58

ETS 300446 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for second generation CordlessTelephone (CT2) apparatus operating in the frequency band 864,1MHz to 868,1 MHz, including public access services

ETS 300447 Radio Equipment und Systems (RES) - ElectroMagneticCompatibility (EMC) standard for VHF FM broadcastingtransmitters

ETS 300454/A1 Radio Equipment and Systems (RES) - Wide band audio links -Technical characteristics and test methods; Amendment A1

ETS 300673 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for 4/6 GHz and 11/12/14 GHz VerySmall Aperture Terminal (VSAT) equipment and 11/12/13/14 GHzSatellite News Gathering (SNG) Transportable Earth Station(TES) equipment

ETS 300680-1 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for Citizens' Band (CB) radio andancillary equipment (speech and/or non-speech) - Part 1:

Angle-modulated

ETS 300680-2 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for Citizen's Band (CB) radio andancillary equipment (speech and/or non-speech) - Part 2: DoubleSide Band (DSB) and/or Single Side Band (SSB)

ETS 300682 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for On-Site Paging equipment

ETS 300683 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for Short Range Devices (SRD)operating on frequencies between 9 kHz and 25 GHz

ETS 300684 Radio Equipment and Systems (RES) - ElectroMagneticCompatibility (EMC) standard for commercially available amateurradio equipment

ETS 300717

Electromagnetic compatibility and Radio spectrum Matters (ERM)- ElectroMagnetic Compatibility (EMC) for analogue cellular radiocommunications equipment - Mobile and portable equipment

ETS 300741 Electromagnetic compatibility and Radio spectrum Matters (ERM)- ElectroMagnetic Compatibility (EMC) standard for wide-areapaging equipment

ETS 300826 Electromagnetic compatibility and Radio spectrum Matters (ERM)- ElectroMagnetic Compatibility (EMC) standard for 2,4 GHzwideband transmission systems and High Performance RadioLocal Area Network (HIPERLAN) equipment

prEN 54-17 Fire detection and fire alarm systems - Part 17: Short circuitisolators

CLC/R 106-001

Guidelines for product committees on the preparation of standardsrelated to human exposure from electromagnetic fields CLC/R 210-003 Guidelines on how to use anechoic enclosures that do not fulfill the

requirements regarding normalized site attenuation forpre-compliance tests of products

CLC/R 210-004 Recommendations on filters for shielded enclosures CLC/R 210-005 Recommendations for shielded enclosures CLC/R 210-008 Guide to EMC conformity of apparatus designed for military and

other purposes CLC/R 210-009 Operation, composition and terms of reference of the Standards

Overview Group of CLC/TC 210 "EMC" CLC/R 210-010 Electromagnetic compatibility - Emission measurements in fully

anechoic chambers prEN 474-1 Earth-moving machinery - Safety - Part 1: General requirements


24/58

EN 474-1/A1 Earth-moving machinery - Safety - Part 1: General requirements; Amendment A1

EN 617 Continuous handling equipment and systems - Safety and EMCrequirements for the equipment for the storage of bulk materials insilos, bunkers, bins and hoppers

EN 618 Continuous handling equipment and systems - Safety and EMCrequirements for equipment for mechanical handling of bulkmaterials except fixed belt conveyors

EN 619 Continuous handling equipment and systems - Safety and EMCrequirements for equipment for mechanical handling of unit loads

EN 620 Continuous handling equipment and systems - Safety and EMCrequirements for fixed belt conveyors for bulk materials

EN 794-1 Lung ventilators - Part 1: Particular requirements for critical careventilators

EN 794-1/A1 Lung ventilators - Part 1: Particular requirements for critical careventilators; Amendment A1

prEN 3758 Aerospace series - Simplex high speed data transmission systemEN 12015 Electromagnetic compatibility - Product family standard for lifts,escalators and passenger conveyors - Emission prEN 12015 Electromagnetic compatibility - Product family standard for lifts,

escalators and passenger conveyors - Emission EN 12016 Electromagnetic compatibility - Product family standard for lifts,

escalators and passenger conveyors - Immunity prEN 12016 Electromagnetic compatibility - Product family standard for lifts,

escalators and passenger conveyors - Immunity EN 12182 Technical aids for disabled persons - General requirements and

test methods EN 12368 Traffic control equipment - Signal heads EN 12895 Industrial trucks - Electromagnetic compatibility EN 13309 Construction machinery - Electromagnetic compatibility of

machines with internal electrical power supply prCEN/TS 14507-1 Inhalational nitric oxide systems - Part 1: Delivery systems EN 50065-1 Signalling on low-voltage electrical installations in the frequency

range 3 kHz to 148,5 kHz - Part 1: General requirements,frequency bands and electromagnetic disturbances

EN 50065-2-2 Signalling on low-voltage electrical installations in the frequencyrange 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements formains communications equipment and systems operating in therange of frequencies 95 kHz to 148,5 kHz and intended for use

EN 50065-2-3 Signalling on low-voltage electrical installations in the frequencyrange 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements formains communications equipment and systems operating in therange of frequencies 3 kHz to 95 kHz and intended for use by el

EN 50083-2 Cable networks for television signals, sound signals andinteractive services - Part 2: Electromagnetic compatibility forequipment

EN 50083-5 Cabled networks for television signals, sound signals andinteractive services - Part 5: Headend equipment

EN 50083-8 Cable networks for television signals, sound signals andinteractive services - Part 8: Electromagnetic compatibility fornetworks

EN 50085-1 Cable trunking systems and cable ducting systems for electricalinstallations - Part 1: General requirements

EN 50085-1/A1 Cable trunking systems and cable ducting systems for electricalinstallations - Part 1: General requirements; Amendment A1


25/58


26/58


27/58

EN 50364 Limitation of human exposure to electromagnetic fields fromdevices operating in the frequency range 0 Hz to 10 GHz, used inElectronic Article Surveillance (EAS), Radio FrequencyIdentification (RFID) and similar applications

prEN 50369 Liquid tight sheathing systems for cable management prEN 50370-1 Electromagnetic compatibility (EMC) - Product family standard for

machine tools - Part 1: Emission EN 50370-2 Electromagnetic compatibility (EMC) - Product family standard for

machine tools - Part 2: Immunity EN 50371 Generic standard to demonstrate the compliance of low power

electronic and electrical apparatus with the basic restrictionsrelated to human exposure to electromagnetic fields (10 MHz - 300GHz) - General public

EN 50383 Basic standard for the calculation and measurement ofelectromagnetic field strength and SAR related to humanexposure from radio base stations and fixed terminal stations forwireless telecommunication systems (110 MHz - 40 GHz)

EN 50384 Product standard to demonstrate the compliance of radio basestations and fixed terminal stations for wireless telecommunicationsystems with the basic restrictions or the reference levels relatedto human exposure to radio frequency electromagnetic field

EN 50385 Product standard to demonstrate the compliance of radio basestations and fixed terminal stations for wireless telecommunicationsystems with the basic restrictions or the reference levels relatedto human exposure to radio frequency electromagnetic field

prEN 50392 Generic standard to demonstrate the compliance of electronic andelectrical apparatus with the basic restrictions related to humanexposure to electromagnetic fields (0 Hz - 300 GHz)

EN 55013 Sound and television broadcast receivers and associatedequipment - Radio disturbance characteristics - Limits andmethods of measurement (CISPR 13:2001, modified)

EN 55013/prA1 Amendment 1 to CISPR 13, Ed. 4: Sound and television broadcastreceivers and associated equipment - Radio disturbancecharacteristics - Limits and methods of measurement

EN 55014-1 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 1: Emission(CISPR 14-1:2000)

EN 55014-1/A1 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 1: Emission;

Amendment A1 (CISPR 14-1:2000/A1:2001) EN 55014-1/A2 Electromagnetic compatibility - Requirements for household

appliances, electric tools and similar apparatus - Part 1: Emission; Amendment A2 (CISPR 14-1:2000/A2:2002) / Note: Endorsementnotice

EN 55014-2 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 2: Immunityproduct family standard (CISPR 14-2:1997)

EN 55014-2/A1 Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus - Part 2: Immunity;Product family standard; Amendment A1 (CISPR14-2:1997/A1:2001)

EN 55014-2/prA2 Requirements for toys; Amendment A2 EN 55015 Limits and methods of measurement of radio disturbance

characteristics of electrical lighting and similar equipment (CISPR15:2000)


28/58

EN 55015/A1 Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment;

Amendment A1 (CISPR 15:2000/A1:2001) / Note: Endorsementnotice

EN 55015/A2 Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment;

Amendment A2 (CISPR 15:2000/A2:2002) / Note: Endorsementnotice

EN 55015/prA3 Amendment to CISPR 15, Ed. 6.0: Limits and methods ofmeasurement of radio disturbance characteristics of electricallighting and similar equipment (concerns electrodeless lamps)

EN 55020 Sound and television broadcast receivers and associatedequipment - Immunity characteristics - Limits and methods ofmeasurement (CISPR 20:2002)

EN 55020/prA2 Draft Amendment 2 to CISPR 20, Ed. 5: Sound and televisionbroadcast receivers and associated equipment - Immunitycharacteristics - Limits and methods of measurement

prEN 55024-3 CISPR 24: immunity of information technology equipment (ITE);part 3: radiated radio frequency fields requirements

prEN 55101-2 Electromagnetic compatibility requirements for informationtechnology equipment; part 2: electrostatic dischargerequirements (CISPR/G(CO)10:1991)

EN 55103-1 Electromagnetic compatibility - Product family standard for audio,video, audio-visual and entertainment lighting control apparatusfor professional use - Part 1: Emission

EN 55103-2 Electromagnetic compatibility - Product family standard for audio,video, audio-visual and entertainment lighting control apparatusfor professional use - Part 2: Immunity

prEN 55105 Electromagnetic compatibility immunity requirements fortelecommunication terminal equipment

prEN 55106 Electromagnetic compatibility immunity requirements forinformation technical equipment excluding telecommunicationterminal equipment

EN 60034-1 Rotating electrical machines - Part 1: Rating and performance(IEC 60034-1:1996, modified)

EN 60034-1/A1 Rotating electrical machines - Part 1: Rating and performance; Amendment A1 (IEC 60034-1:1996/A1:1997)

EN 60034-1/A2 Rotating electrical machines - Part 1: Rating and performance; Amendment A2 (IEC 60034-1:1996/A2:1999)

EN 60034-1/A11 Rotating electrical machines - Part 1: Rating and performance; Amendment A11

EN 60076-1 Power transformers - Part 1: General (IEC 60076-1:1993,modified)

EN 60076-1/A1 Power transformers - Part 1: General; Amendment A1 (IEC60076-1:1993/A1:1999)

EN 60076-1/A12 Power transformers - Part 1: General; Amendment A12 EN 60077-1 Railway applications - Electric equipment for rolling stock - Part 1:

General service conditions and general rules (IEC 60077-1:1999,modified)

EN 60118-13 Hearing aids - Part 13: Electromagnetic compatibility (EMC) (IEC60118-13:1997)

prEN 60118-13 IEC 60118-13: Hearing aids - Part 13: Electromagneticcompatibility (EMC); Product standard

EN 60146-2 Semiconductor converters - Part 2: Self-commutatedsemiconductor converters including direct d.c. converters (IEC60146-2:1999)


29/58


30/58


31/58

EN 60730-1/prAA Automatic electrical controls for household and similar use - Part1: General requirements; Amendment AA

EN 60730-1/prAB Automatic electrical controls for household and similar use - Part1: General requirements; Amendment AB

EN 60730-2-9/prA2 Amendment 2 to IEC 60730-2-9, Ed. 2: Automatic electricalcontrols for household and similar use - Part 2-9: Particularrequirements for temperature sensing controls

EN 60730-2-13 Automatic electrical controls for household and similar use - Part2: Particular requirements for humidity sensing controls (IEC60730-2-13:1995, modified)

EN 60730-2-13/A1 Automatic electrical controls for household and similar use - Part2: Particular requirements for humidity sensing controls;

Amendment A1 (IEC 60730-2-13:1995/A1:1997) EN 60730-2-13/A2 Automatic electrical controls for household and similar use - Part

2: Particular requirements for humidity sensing controls; Amendment A2 (IEC 60730-2-13:1995/A2:2000, modified)

EN 60831-1 Shunt power capacitors of the self-healing type for a.c. systems

having a rated voltage up to and including 1 kV - Part 1: General -Performance, testing and rating - Safety requirements - Guide forinstallation and operation (IEC 60831-1:1996)

EN 60868 Flickermeter; functional and design specifications (IEC60868:1986 + A1:1990)

EN 60870-2-1 Telecontrol equipment and systems - Part 2: Operating conditions- Section 1: Power supply and electromagnetic compatibility (IEC60870-2-1:1995)

EN 60898/A12 Circuit-breakers for overcurrent protection for household andsimilar installations; Amendment A12

EN 60938-1 Fixed inductors for electromagnetic interference suppression -Part 1: Generic specification (IEC 60938-1:1999)

EN 60938-2 Fixed inductors for electromagnetic interference suppression -Part 2: Sectional specification (IEC 60938-2:1999) EN 60938-2-1 Fixed inductors for electromagnetic interference suppression -

Part 2-1: Blank detail specification - Inductors for which safetytests are required - Assessment level D (IEC 60938-2:1999)

EN 60938-2-2 Fixed inductors for electromagnetic interference suppression -Part 2-2: Blank detail specification - Inductors for which safetytests are required (only) (IEC 60938-2-2:1999)

EN 60947-1 Low-voltage switchgear and controlgear - Part 1: General rules(IEC 60947-1:1999, modified)

EN 60947-1/A1 Low-voltage switchgear and controlgear - Part 1: General rules; Amendment A1 (IEC 60947-1:1999/A1:2000)

EN 60947-1/A2 Low-voltage switchgear and controlgear - Part 1: General rules; Amendment A2 (IEC 60947-1:1999/A2:2001)

EN 60947-2 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers(IEC 60947-2:1995)

EN 60947-2/A1 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment A1 (IEC 60947-2:1995/A1:1997)

EN 60947-2/A2 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment A2 (IEC 60947-2:1995/A2:2001)

EN 60947-2/prA3 Low-voltage switchgear and controlgear - Part 2: Circuit-breakersEN 60947-3 Low-voltage switchgear and controlgear - Part 3: Switches,

disconnectors, switch-disconnectors and fuse-combination units

(IEC 60947-3:1999)


32/58

EN 60947-3/A1 Low-voltage switchgear and controlgear - Part 3: Switches,disconnectors, switch-disconnectors and fuse-combination units;

Amendment A1 (IEC 60947-3:1999/A1:2001) EN 60947-4-3 Low-voltage switchgear and controlgear - Part 4-3: Contactors and

motor-starters - AC semiconductor controllers and contactors fornon-motor loads (IEC 60947-4-3:1999)

EN 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuitdevices and switching elements - Electromechanical control circuitdevices (IEC 60947-5-1:1997)

EN 60947-5-1/A1 Low-voltage switchgear and controlgear - Part 5-1: Control circuitdevices and switching elements - Electromechanical control circuitdevices; Amendment A1 (IEC 60947-5-1:1997/A1:1999)

EN 60947-5-1/A2 Low-voltage switchgear and controlgear - Part 5-1: Control circuitdevices and switching elements - Electromechanical control circuitdevices (IEC 60947-5-1:1997/A2:1999); Amendment A2

EN 60947-5-1/A12 Low-voltage switchgear and controlgear - Part 5-1: Control circuitdevices and switching elements - Electromechanical control circuit

devices; Amendment A12 EN 60947-5-1/prA3 Amendment 3 to IEC 60947-5-1 (1997-10) EN 60947-5-2 Low-voltage switchgear and controlgear - Part 5-2: Control circuit

devices and switching elements - Proximity switches (IEC60947-5-2:1997, modified)

EN 60947-5-2/A1 Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches; Amendment

A1 (IEC 60947-5-2:1997/A1:1999) EN 60947-6-1/A2 Low-voltage switchgear and controlgear - Part 6: Multiple function

equipment - Section 1: Automatic transfer switching equipment; Amendment A2 (IEC 60947-6-1:1989/A2:1997)

EN 60947-6-2/A1 Low-voltage switchgear and controlgear - Part 6: Multiple functionequipment - Section 2: Control and protective switching devices(or equipment) (CPS); Amendment A1 (IEC60947-6-2:1992/A1:1997)

EN 60947-6-2/A2 Low-voltage switchgear and controlgear - Part 6-2: Multiplefunction equipment - Control and protective switching devices (orequipment) (CPS); Amendment 2 (IEC 60947-6-2:1992/A2:1998)

EN 60947-6-2/prA3 Amendment 3 to IEC 60947-6-2, Ed. 1.0 prEN 60947-8 IEC 60947-8: Low-voltage switchgear and controlgear - Part 8:

Control units for built-in thermal protection for rotating electricalmachines

prEN 60974-10 Arc welding equipment - Part 10: Electromagnetic compatibility(EMC) requirements

prEN 60974-10/prAA Arc welding equipment - Part 10: Electromagnetic compatibility(EMC) requirements; Amendment AA EN 60998-1/A1 Connecting devices for low voltage circuits for household and

similar purposes - Part 1: General requirements; Amendment A1(IEC 60998-1:1990/A1:1998)

EN 61000-2-2 Electromagnetic compatibility (EMC) - Part 2-2: Environment;Compatibility levels for low-frequency conducted disturbances andsignalling in public low-voltage power supply systems (IEC61000-2-2:2002) / Note: Endorsement notice

EN 61000-2-4 Electromagnetic compatibility (EMC) - Part 2-4: Environment;Compatibility levels in industrial plants for low-frequencyconducted disturbances (IEC 61000-2-4:2002) / Note:

Endorsement notice


33/58

EN 61000-2-9 Electromagnetic compatibility (EMC) - Part 2: Environment -Section 9: Description of HEMP environment - Radiateddisturbance - Basic EMC publication (IEC 61000-2-9:1996)

EN 61000-2-10 Electromagnetic compatibility (EMC) - Part 2-10: Environment -Description of HEMP environment - Conducted disturbance (IEC61000-2-10:1998)

prEN 61000-2-11 IEC 61000-2-11: Electromagnetic compatibility (EMC) - Part 2-11:Environment - Classification of HEMP environments

prEN 61000-2-12 Electromagnetic Compatibility (EMC) - Part 2-12: Environment;Compatibility levels for low-frequency conducted disturbances andsignalling in public medium-voltage power supply systems; BasicEMC publication

prEN 61000-2-24 IEC 1000-4-24: Electromagnetic compatibility (EMC) - Part 4:Testing and measuring techniques - Section 24: Test methods forprotective devices for HEMP conducted disturbance - Basic EMCpublication

EN 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits forharmonic current emissions (equipment input current up to and

including 16 A per phase) (IEC 61000-3-2:2000, modified) EN 61000-3-2/prA1 Amendment 1 to IEC 61000-3-2, Ed. 2: Electromagnetic

compatibility (EMC) - Part 3-2: Limits; Limits for harmonic currentemissions (equipment input current 16 A per phase)

EN 61000-3-3 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3:Limitation of voltage fluctuations and flicker in low-voltage supplysystems for equipment with rated current 16 A (IEC61000-3-3:1994)

EN 61000-3-3/A1 Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitationof voltage changes, voltage fluctuations and flicker in publiclow-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional

connection

EN 61000-3-3/prA11 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3:Limitation of voltage fluctuations and flicker in low-voltage supplysystems for equipment with rated current 16 A

EN 61000-3-11 Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitationof voltage changes, voltage fluctuations and flicker in publiclow-voltage supply systems; Equipment with rated current 75 A and subject to conditional connection (IEC 61000-

EN 61000-4-1 Electromagnetic compatibility (EMC) - Part 4-1: Testing andmeasurement techniques; Overview of IEC 61000-4 series (IEC61000-4-1:2000)

EN 61000-4-2 Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 2: Electrostatic dischargeimmunity test - Basic EMC publication (IEC 61000-4-2:1995) EN 61000-4-2/A1 Electromagnetic compatibility (EMC) - Part 4-2: Testing and

measurement techniques - Electrostatic discharge immunity test; Amendment A1 (IEC 61000-4-2:1995/A1:1998)

EN 61000-4-2/A2 Electromagnetic compatibility (EMC) - Part 4-2: Testing andmeasurement techniques; Electrostatic discharge immunity test;

Amendment A2 (IEC 61000-4-2:1995/A2:2000) EN 61000-4-2/prA3 Amendment to IEC 61000-4-2 EN 61000-4-2/prAA Amendment to IEC 61000-4-2: A test set-up for portable and/or

double insulated table top equipment EN 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and

measurement techniques; Radiated, radio-frequency,electromagnetic field immunity test (IEC 61000-4-3:2002)


34/58

EN 61000-4-3/A1 Electromagnetic compatibility (EMC) - Part 4-3: Testing andmeasurement techniques; Radiated, radio-frequency,electromagnetic field immunity test; Amendment A1 (IEC61000-4-3:2002/A1:2002) / Note: Endorsement notice

EN 61000-4-4 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques - Section 4: Electrical fast transient/burst

immunity test - Basic EMV publication (IEC 61000-4-4:1995) EN 61000-4-4/A1 Electromagnetic compatibility (EMC) - Part 4-4: Testing and

measurement techniques; Electrical fast transient/burst immunitytest; Amendment A1 (IEC 61000-4-4:1995/A1:2000)

EN 61000-4-4/A2 Electromagnetic compatibility (EMC) - Part 4-4: Testing andmeasurement techniques; Electrical fast transient/burst immunitytest; Amendment A2 (IEC 61000-4-4:1995/A2:2001)

EN 61000-4-4/prAA Amendment to IEC 61000-4-2: Revision of clause 9: Test resultsand test report

EN 61000-4-4/prAB Amendment to IEC 61000-4-4 (1995) EN 61000-4-5 Electromagnetic compatibility (EMC) - Part 4: Testing and

measurement techniques - Section 5: Surge immunity test (IEC61000-4-5:1995)

EN 61000-4-5/A1 Electromagnetic compatibility (EMC) - Part 4-5: Testing andmeasurement techniques; Surge immunity test; Amendment A1(IEC 61000-4-5:1995/A1:2000)


EN 61000-4-5/prAB Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climaticconditions

EN 61000-4-6 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques - Section 6: Immunity to conducteddisturbances, induced by radio-frequency fields (IEC61000-4-6:1996)

prEN 61000-4-6 Electromagnetic Compatibility (EMC) - Part 4-6: Testing andmeasurement techniques; Immunity to conducted disturbances,induced by radio-frequency fields

EN 61000-4-6/A1 Electromagnetic compatibility (EMC) - Part 4-6: Testing andmeasurement techniques; Immunity to conducted disturbances,induced by radio-frequency fields; Amendment A1 (IEC61000-4-6:1996/A1:2000)

EN 61000-4-7 Electromagnetic compatibility (EMC); part 4: testing andmeasurement techniques; section 7: general guide on harmonicsand interharmonics measurements and instrumentation, for powersupply systems and equipment connected thereto (IEC61000-4-7:1991) / No

EN 61000-4-8 Electromagnetic compatibility (EMC); part 4: testing andmeasurement techniques; section 8: power frequency magneticfield immunity test; basic EMC publication (IEC 61000-4-8:1993)

EN 61000-4-8/A1 Electromagnetic compatibility (EMC) - Part 4-8: Testing andmeasurement techniques; Power frequency magnetic fieldimmunity test; Amendment A1 (IEC 61000-4-8:1993/A1:2000)



EN 61000-4-9 Electromagnetic compatibility (EMC); part 4: testing andmeasurement techniques; section 9: pulse magnetic fieldimmunity test; basic EMC publication (IEC 61000-4-9:1993)


35/58

EN 61000-4-9/A1 Electromagnetic compatibility (EMC) - Part 4-9: Testing andmeasurement techniques; Puls magnetic field immunity test;

Amendment A1 (IEC 61000-4-9:1993/A1:2000) EN 61000-4-9/prAA Amendment to IEC 61000-4-2: Revision of clause 9: Test results

and test report EN 61000-4-9/prAB Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic

conditions EN 61000-4-10 Electromagnetic compatibility (EMC); part 4: testing and

measurement techniques; section 10: damped oscillatorymagnetic field immunity test; basic EMC publication (IEC61000-4-10:1993)

EN 61000-4-10/A1 Electromagnetic compatibility (EMC) - Part 4-10: Testing andmeasurement techniques; Damped oscillatory magnetic fieldimmunity test; Amendment A1 (IEC 61000-4-10:1993/A1:2000)



EN 61000-4-11 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques - Section 11: Voltage dips, shortinterruptions and voltage variations immunity tests (IEC61000-4-11:1994)

EN 61000-4-11/A1 Electromagnetic compatibility (EMC) - Part 4-11: Testing andmeasurement techniques; Voltage dips, short interruptions andvoltage variations immunity tests; Amendment A1 (IEC61000-4-11:1994/A1:2000)



EN 61000-4-12 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques - Section 12: Oscillatory wavesimmunity tests - Basic EMC publication (IEC 61000-4-12:1995)

EN 61000-4-12/A1 Electromagnetic compatibility (EMC) - Part 4-12: Testing andmeasurement techniques; Oscillatory waves immunity test;

Amendment A1 (IEC 61000-4-12:1995/A1:2000) EN 61000-4-12/prAA Amendment to IEC 61000-4-2: Revision of clause 9: Test results

and test report EN 61000-4-12/prAB Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic

conditions EN 61000-4-13 Electromagnetic compatibility (EMC) - Part 4-13: Testing and

measurement techniques; Harmonics and interharmonicsincluding mains signalling at a.c. power port, low frequencyimmunity tests (IEC 61000-4-13:2002) / Note: Endorsement notice

EN 61000-4-14 Electromagnetic compatibility (EMC) - Part 4-14: Testing andmeasurement techniques - Voltage fluctuation immunity test (IEC61000-4-14:1999)

EN 61000-4-15 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques - Section 15: Flickermeter - Functionaland design specifications (IEC 61000-4-15:1997)

EN 61000-4-15/prA1 Amendment 1 to IEC 61000-4-15: Electromagnetic compatibility(EMC) - Part 4-15: Testing and measurement techniques;Flickermeter; Functional and design specifications


36/58

EN 61000-4-16 Electromagnetic compatibility (EMC) - Part 4-16: Testing andmeasurement techniques - Test for immunity to conducted,common mode disturbances in the frequency range 0 Hz to 150kHz (IEC 61000-4-16:1998)

EN 61000-4-17 Electromagnetic compatibility (EMC) - Part 4-17: Testing andmeasurement techniques - Ripple on d.c. input power port

immunity test (IEC 61000-4-17:1999) prEN 61000-4-20 IEC 61000-4-20: Electromagnetic compatibility (EMC) - Part 4-20:

Testing and measurement techniques; Emission and immunitytesting in transverse electromagnetic (TEM) waveguides

prEN 61000-4-21 Electromagnetic Compatibility (EMC) - Part 4-21: Testing andmeasurement techniques; Reverberation chamber test methods

EN 61000-4-23 Electromagnetic compatibility (EMC) - Part 4-23: Testing andmeasurement techniques; Test methods for protective devices forHEMP and other radiated disturbances (IEC 61000-4-23:2000)

EN 61000-4-24 Electromagnetic compatibility (EMC) - Part 4: Testing andmeasurement techniques - Section 24: Test methods forprotective devices for HEMP conducted disturbance - Basic EMCpublication (IEC 61000-4-24:1997)

EN 61000-4-25 Electromagnetic compatibility (EMC) - Part 4-25: Testing andmeasuring techniques - HEMP immunity test methods forequipment and systems (IEC 61000-4-25:2001)

EN 61000-4-27 Electromagnetic compatibility (EMC) - Part 4-27: Testing andmeasurement techniques; Unbalance, immunity test (IEC61000-4-27:2000)

EN 61000-4-28 Electromagnetic compatibility (EMC) - Part 4-28: Testing andmeasurement techniques - Variation of power fr

EMC Standard.pdf

Documents

Transcript of EMC Standard.pdf