Element Card 2 Experimenting with Mixtures, Compounds, and...

1
EXPERIMENTING WITH MIXTURES, COMPOUNDS, AND ELEMENTS The STC Program™ © Smithsonian Institution Element Card 2 Experimenting with Mixtures, Compounds, and Elements Lesson 7 Argon THIS SCIENTIST IS PERFORMING RESEARCH USING AN ARGON LASER. PHOTO: Courtesy of the U.S. Department of Energy Argon makes up about 1% of air. It is the third most common gas in air and is obtained by the distillation of air. –189.2°C –185.7°C 0.0017 g/cm 3 Argon does not react with substances (except fluorine). It is odorless and nontoxic. Argon is used in lightbulbs, lasers, and arc welders. Crystals for making computer chips are grown in an inert, argon atmosphere. Melting Point Boiling Point Density Appearance Other Physical Properties Chemical Properties Compounds Uses Notes Follow these steps: 1. The gas inside the lightbulb in the lamp is argon. Describe it. 2. Plug in the lamp. Does the wire burn or glow? What does this suggest to you about argon gas?

Transcript of Element Card 2 Experimenting with Mixtures, Compounds, and...

Page 1: Element Card 2 Experimenting with Mixtures, Compounds, and …mrfiegel.weebly.com/uploads/5/4/0/3/54031661/element... · 2019-09-10 · experimenting with mixtures, compounds, and

EXPERIMENTING WITH MIXTURES, COMPOUNDS, AND ELEMENTSThe STC Program™© Smithsonian Institution

Element Card 2 • Experimenting with Mixtures, Compounds, and Elements • Lesson 7 Argon

THIS SCIENTIST IS PERFORMING RESEARCH USING AN ARGON LASER. PHOTO: Courtesy of the U.S. Department of Energy

Argon makes up about 1% of air. It is the third most common gas in air and is obtained by the distillation of air.

–189.2°C

–185.7°C

0.0017 g/cm3

Argon does not react with substances (except fluorine). It is odorless and nontoxic.

Argon is used in lightbulbs, lasers, and arc welders. Crystals for making computer chips are grown in an inert, argon atmosphere.

Melting Point

Boiling Point

Density

Appearance

Other Physical Properties

Chemical Properties

Compounds

Uses

Notes

Follow these steps:

1. The gas inside the lightbulb in the lamp is argon. Describe it.

2. Plug in the lamp. Does the wire burn or glow? What does this suggest to you about argon gas?