ELECTRICAL STATIC DISCHARGE (ESD) SOLUTIONS
1
24/Seven ® ESD LockSafe ® PRODUCT PART NUMBER SIZE COLOR 24/Seven® LockSafe® Solid ESD Grease Resistant 770.58x3x3GRBK 3' x 3' BK POSITIVE INTERLOCKING TILES WITH ESD PROTECTION! Static Electricity can produce damaging sparks that can ruin and destroy expensive equipment. 24/ Seven LockSafe ESD eliminates static, while providing an ergonomic worksurface for your team to perform. Made to cover large areas quickly, the 770 ESD can be placed directly atop a conductive coating or floor, eliminating the need for messy grounding cords. For more conventional installa- tions, each tile comes with the grounding snap already installed for use with a grounding cord. The ‘positive interlock’ technology allows the rubber tiles to lock in, while remaining easy enough to ‘unzip’ for reconfiguration. Around electronics keeping a work area clean is very important. The Locksafe connection system allows the mat to be rolled up to make keeping a cleaning easier. • Tiles interlock securely and can be easily reconfigured • EOS/ESD: Dissipative range- 1x10^6 to 1 x 10^10 • Grounding snap on each mat • 3’x 3’(91x91cm) rubber tiles • Overall thickness 5/8” (15.9 mm) Drainage Tile Corner Edges CONDUCTIVE STATIC DISSIPATIVE ADDED RESISTANCE LOW RESISTANCE = HIGH ENERGY FLOW High Flow = Low Resistance Low Ohm rating Low Flow = High Resistance High ohm rating HIGH RESISTANCE = LOW ENERGY FLOW (1x10 3 Ω to 1x10 6 Ω) (>1x10 6 Ω to 1x10 10 Ω) ELECTRICAL STATIC DISCHARGE (ESD) 101
Transcript of ELECTRICAL STATIC DISCHARGE (ESD) SOLUTIONS
24/Seven® ESD LockSafe®
PRODUCT PART NUMBER SIZE COLOR
24/Seven® LockSafe® Solid ESD Grease Resistant 770.58x3x3GRBK 3' x 3' BK
POSITIVE INTERLOCKING TILES WITH ESD PROTECTION!
Static Electricity can produce damaging sparks that can ruin and destroy expensive equipment. 24/ Seven LockSafe ESD eliminates static, while providing an ergonomic worksurface for your team to perform. Made to cover large areas quickly, the 770 ESD can be placed directly atop a conductive coating or floor, eliminating the need for messy grounding cords. For more conventional installa-tions, each tile comes with the grounding snap already installed for use with a grounding cord. The ‘positive interlock’ technology allows the rubber tiles to lock in, while remaining easy enough to ‘unzip’ for reconfiguration. Around electronics keeping a work area clean is very important. The Locksafe connection system allows the mat to be rolled up to make keeping a cleaning easier.
• Tiles interlock securely and can be easily reconfigured
• EOS/ESD: Dissipative range- 1x10^6 to 1 x 10^10
• Grounding snap on each mat
• 3’x 3’(91x91cm) rubber tiles
• Overall thickness 5/8” (15.9 mm)Drainage
Tile
Corner
Edges
ELECTRICAL STATIC DISCHARGE (ESD) SOLUTIONS
CONDUCTIVE STATIC DISSIPATIVE
ADDED RESISTANCE
LOW RESISTANCE = HIGH ENERGY FLOW
High Flow =
ESD Heel Grounder
ESD 6' Coil Cord and Wrist Strap
Wrist Strap ClipConnection Point
ESD Work Surface Material
15’ ESD Ground Cord
15’ ESD Ground Cord
ESD Anti-Fatigue Mat
Low ResistanceLow Ohm rating
Low Flow =High ResistanceHigh ohm rating
HIGH RESISTANCE = LOW ENERGY FLOW
FLOOR TABLE
Electro static discharge can destroy sensitive electronics, damage magnetic media, and even cause fires and explosions. Conductive, anti-static and static dissipative mats and accessories are used to minimize these risks.
Electrical resistance is measured in ohms; the smaller the rating, the more conductive the material.
(1x103Ω to 1x106Ω) (>1x106Ω to 1x1010Ω)
Electrical Static Discharge (ESD) 101:
ELECTRICAL STATIC DISCHARGE (ESD) 101
