Electrical Machines-Ch2-Dcmotor
description
Transcript of Electrical Machines-Ch2-Dcmotor
abdulsalam@pmj-2015/DET3043 1
ELECTRICAL MACHINES-CHAPTER 2-
DC MOTOR
2
Learning Objectives:
1. Understand the construction and principle operation of a DC motor
2. Apply the principle operation of DC motor.
abdulsalam@pmj-2015/DET3043
abdulsalam@pmj-2015/DET3043 3
Electric Motor
The input is electrical energy (from the supply source), and the output is mechanical energy (to the load).
abdulsalam@pmj-2015/DET3043 4
CONSTRUCTION
DC motors consist of one set of coils, called armature winding, inside another set of coils or a set of
permanent magnets, called the stator. Applying a voltage to the coils produces a torque in the armature, resulting in motion.
N S
Stator with with polesBrush
Rotor
Field• Stator: Stationary part of the machine.
The stator carries a field winding that is used to produce the required magneticfield by DC excitation. Often know as the field.• Rotor: The rotor is the rotating part of the machine. The rotor carries a distributed winding, and is the winding where the emf is induced. Also known as the armature.
abdulsalam@pmj-2015/DET3043 5
CONSTRUCTION
Stator
The stator is the stationary outside part of a motor.
The stator of a permanent magnet dc motor is composed of two or more permanent magnet pole pieces.
The magnetic field can alternatively be created by an electromagnet. In this case, a DC coil (field
winding) is wound around a magnetic material that forms part of the stator.
abdulsalam@pmj-2015/DET3043 6
CONSTRUCTION
Rotor
The rotor is the inner part which rotates.
The rotor is composed of windings (called armature windings) which are connected to the external
circuit through a mechanical commutator.
Both stator and rotor are made of ferromagnetic materials. The two are separated by air-gap.
abdulsalam@pmj-2015/DET3043 7
CONSTRUCTION
A winding is made up of series or parallel connection of coils.
Armature winding - The winding through which the voltage is applied or induced.
Field winding - The winding through which a current is passed to produce flux (for the electromagnet)
Windings are usually made of copper.
abdulsalam@pmj-2015/DET3043 8
CONSTRUCTION
• The rotor iron core is mounted on the shaft.
• Coils are placed in the slots.
• The end of the coils are bent and tied together to assure mechanical strength.
• Note the commutator mounted on the shaft. It consists of several copper segments, separated by insulation.
Commutator
Poles
Brushes
Rotor winding
Fan
Bearing
abdulsalam@pmj-2015/DET3043 9
DC MOTOR BASIC PRINCIPLES
Energy Conversion
If electrical energy is supplied to a conductor lying perpendicular to a magnetic field, the interaction of
current flowing in the conductor and the magnetic field will produce mechanical force (and therefore,
mechanical energy).
abdulsalam@pmj-2015/DET3043 10
DC MOTOR BASIC PRINCIPLES
Value of Mechanical Force
There are two conditions which are necessary to produce a force on the conductor. The conductor must
be carrying current, and must be within a magnetic field. When these two conditions exist, a force will be
applied to the conductor, which will attempt to move the conductor in a direction perpendicular to the magnetic
field. This is the basic theory by which all DC motors operate.
abdulsalam@pmj-2015/DET3043 11
DC MOTOR BASIC PRINCIPLES
The force exerted upon the conductor can be expressed as follows : F = B x i x l (unit Newton)
where B is the density of the magnetic field, l is the length of conductor, and i the value of current flowing in the conductor. The direction of motion can be found using Fleming’s Left Hand Rule.
Fleming’s Left Hand Rule
The first finger points in the direction of the magnetic field (first - field), which goes from the North pole to the South pole. The second finger points in the direction of the current in the wire (second - current). The thumb then points in the direction the wire is thrust or pushed while in the magnetic field (thumb - torque or thrust).
abdulsalam@pmj-2015/DET3043 12
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 13
DC MOTOR BASIC PRINCIPLES
Principle of operation
Consider a coil in a magnetic field of flux density B. When the two ends of the coil are connected across a DC voltage source, current I flows through it. A force is exerted on the coil as a result of the interaction of magnetic field and electric current. The force on the two sides of the coil is such that the coil starts to move in the direction of force.
abdulsalam@pmj-2015/DET3043 14
DC MOTOR BASIC PRINCIPLES
In an actual DC motor, several such coils are wound on the rotor, all of which experience force, resulting in rotation. The greater the current in the wire, or the greater the magnetic field, the faster the wire moves because of the greater force created.
At the same time this torque is being produced, the conductors are moving in a magnetic field. At different positions, the flux linked with it changes, which causes an emf to be induced (e = ) as shown. This voltage is in opposition to the voltage that causes current flow through the conductor and is referred to as a counter-voltage or back emf.
abdulsalam@pmj-2015/DET3043 15
DC MOTOR BASIC PRINCIPLES
Induced voltage in the armature winding of DC motor
abdulsalam@pmj-2015/DET3043 16
DC MOTOR BASIC PRINCIPLES
The value of current flowing through the armature is dependent upon the difference between the applied voltage and this counter-voltage. The current due to this counter-voltage tends to oppose the very cause for its production according to Lenz’s law. It results in the rotor slowing down. Eventually, the rotor slows just enough so that the force created by the magnetic field (F = Bil) equals the load force applied on the shaft. Then the system moves at constant velocity.
abdulsalam@pmj-2015/DET3043 17
DC MOTOR BASIC PRINCIPLES
Induced Counter-voltage (Back emf):
Due to the rotation of this coil in the magnetic field, the flux linked with it changes at different positions, which causes an emf to be induced The induced emf in a single coil, e = dc/dt
Since the flux linking the coil, c = Sin ωt
Induced voltage : e = ω Cos ωt
abdulsalam@pmj-2015/DET3043 18
DC MOTOR BASIC PRINCIPLES
Note that equation (induced voltage) gives the emf induced in one coil. As there are several coils wound all around the rotor, each with a different emf depending on the amount of flux change through it, the total emf can be obtained by summing up the individual emfs.
The total emf induced in the motor by several such coils wound on the rotor can be obtained by integrating equation, and expressed as:
where K is an armature constant, and is related to the geometry and magnetic properties of the motor, and ωm is the speed of rotation. The electrical power generated by the machine is given by:
abdulsalam@pmj-2015/DET3043 19
DC MOTOR BASIC PRINCIPLES
Generated EMF in a Real DC Machine
WhereZ = total number of conductors, P = total number of polesa = P for lap winding, a = 2 for wave winding, φ = flux,ω = speed in rad/s and n = speed in rpm.
abdulsalam@pmj-2015/DET3043 20
DC MOTOR BASIC PRINCIPLES
Counter EMF:
When the motor is running, internally generated
emf, (EG = EC) opposes the applied voltage, thus:
I=
V − E RA T C
A
Where: VT = terminal voltage, Ec = counter EMF, RA is the armature resistance and IA is the armature current
abdulsalam@pmj-2015/DET3043 21
DC MOTOR BASIC PRINCIPLES
The Relationship Between The Induced Emf And Torque
abdulsalam@pmj-2015/DET3043 22
DC MOTOR BASIC PRINCIPLES
Example 1
23
DC MOTOR BASIC PRINCIPLES
Example 2
abdulsalam@pmj-2015/DET3043
abdulsalam@pmj-2015/DET3043 24
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 25
DC MOTOR BASIC PRINCIPLES
Equivalent circuit
The equivalent circuit of DC Motors (and Generators) has two components:
•Armature circuit: It can be represented by a voltage source and a resistance connected in series (the armature resistance). The armature winding has a resistance, Ra.
•The field circuit: It is represented by a winding that generates the magnetic field and a resistance connected in series. The field winding has resistance Rf.
abdulsalam@pmj-2015/DET3043 26
DC MOTOR BASIC PRINCIPLES
•Shunt Motors
-Field and armature windings are connected in parallel.
•Series Motors
-Field and armature windings are connected in series.
•Compound Motors
-Has both shunt and series field so it combines features of series and shunt motors.
abdulsalam@pmj-2015/DET3043 27
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 28
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 29
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 30
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 31
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 32
DC MOTOR BASIC PRINCIPLES
Example 1
abdulsalam@pmj-2015/DET3043 33
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 34
DC MOTOR BASIC PRINCIPLES
Example 2
abdulsalam@pmj-2015/DET3043 35
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 36
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 37
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 38
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 39
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 40
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 41
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 42
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 43
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 44
DC MOTOR BASIC PRINCIPLES
Shunt Motor: Speed Control
abdulsalam@pmj-2015/DET3043 45
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 46
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 47
DC MOTOR BASIC PRINCIPLES
Shunt Motor : The effect of an open field circuit
abdulsalam@pmj-2015/DET3043 48
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 49
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 50
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 51
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 52
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 53
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 54
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 55
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 56
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 57
abdulsalam@pmj-2015/DET3043 58
abdulsalam@pmj-2015/DET3043 59
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 60
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 61
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 62
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 63
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 64
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 65
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 66
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 67
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 68
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 69
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 70
DC MOTOR BASIC PRINCIPLES
Compound Motor: Speed Control
abdulsalam@pmj-2015/DET3043 71
DC MOTOR BASIC PRINCIPLES
Torque-Speed Characteristics:
In order to effectively use a D.C. motor for an application, it is necessary to understand its characteristic curves.
For every motor, there is a specific Torque/Speed curve and Power curve.
The relation between torque and speed is important in choosing a DC motor for a particular application.
abdulsalam@pmj-2015/DET3043 72
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 73
DC MOTOR BASIC PRINCIPLES
DC Motor Speed Control
abdulsalam@pmj-2015/DET3043 74
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 75
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 76
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 77
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 78
abdulsalam@pmj-2015/DET3043 79
DC MOTOR BASIC PRINCIPLES
DC Motor Starting
abdulsalam@pmj-2015/DET3043 80
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 81
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 82
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 83
DC MOTOR BASIC PRINCIPLES
DC Motor Efficiency
abdulsalam@pmj-2015/DET3043 84
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 85
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 86
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 87
DC MOTOR BASIC PRINCIPLES
It is important to mention that the total input and output power can be calculated in many different ways using the power flow diagram, depending on the information given. Also note that the torque developed inside the rotor is different from the final (output) torque supplied to the load due to rotational losses.
abdulsalam@pmj-2015/DET3043 88
DC MOTOR BASIC PRINCIPLES
Example 1
abdulsalam@pmj-2015/DET3043 89
DC MOTOR BASIC PRINCIPLES
abdulsalam@pmj-2015/DET3043 90
DC MOTOR BASIC PRINCIPLES
Example 2
abdulsalam@pmj-2015/DET3043 91
abdulsalam@pmj-2015/DET3043 92
DC MOTOR BASIC PRINCIPLES
Self Test 1
abdulsalam@pmj-2015/DET3043 93
DC MOTOR BASIC PRINCIPLES
Self Test 2