Slide 1

ECSO 10/20101 An FDOT Project: Urban Roadway Design Example Presented By: Vern Danforth P.E., Florida Department of Transportation Engineering CADD Systems Office vern.danforth@dot.state.fl.us

Slide 2

ECSO 10/20102 So, Lets start here !

Slide 3

ECSO 10/20103 Slightly modified!

Slide 4

ECSO 10/20104

Slide 5

5

Slide 6

6

Slide 7

Template Library(s) Retrieve Standards Components Retrieve Component Groups Retrieve Typical Sections Create/Edit Job Sections Assign Rules and Parameters Define Geometry Constraints Roadway Designer Target Graphics Elements Template(s) Station Limits Point Controls Super elevation Milling/Overlay Criteria End Condition Exceptions Parametric Constraints ECSO 10/20107 itl ird Its a designers toolkit ! Broad StrokesTrim Out to Finish

Slide 8

Project Template Median crossovers Left Turn lanes in the median Traffic Separators Meandering sidewalk Variable width sidewalk Hand Rails on sidewalk -720 Gravity Walls 751 Urban Driveway Locations i Project Roadway Designer Special Ditch Profile 717 Retaining Walls 722 Intersections-dempsy ECSO 10/20108... As the design dictates!

Slide 9

DESIGN TIN OR DTM Surface Model Analysis Tools contours, slope vectors, drainage R/W limit boundary or hull Wetland Impacts Re-Wall Limits Gravity Wall Location Needs VISUALIZE 3D Perspectives of Roadway Design walk the design drive along fly over Render Photo-match Animate INTEGRATE other 3D MODELS Drainage Existing Utilities Proposed Utilities Structures/Bridges Google warehouse 3D Cells Etc. OUTPUT Automated Machine Guidance Land XML Cross Sections at any interval ECSO 10/20109... W hat's in it for me!

Slide 10

Questions Follow-up on behalf of the entire ECSO office. Thank you for attending ! ECSO 10/201010