バイオマスからの 水素水素 テ ション構築ステー …...福岡水素エネルギー戦略会議高効率水素製造研究分科会 バイオマスからの 水素水素
個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2...
Transcript of 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2...
![Page 1: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/1.jpg)
個別要素法に関する検証と妥当性確認
東電設計 中瀬仁
非線形地震応答解析の検証と妥当性確認の方法と事例workshop 2019年2月13日(水)
1
![Page 2: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/2.jpg)
速度分布 (到達距離)
先端の位置
斜面崩落影響評価WG(PRAの枠組み:確率分布ベースの評価)
流下した土塊・岩塊が構造物に与える衝撃力
着目する現象・指標
集合体としての到達距離
堆積土量
設計外力を超えた場合の挙動評価
Reality of interest
土木学会原子力土木委員会地盤安定性評価小委員会
2
![Page 3: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/3.jpg)
個別要素法による簡易モデル
3
![Page 4: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/4.jpg)
Validation of the model
Target: Rock drop test
80cm
41°
177 lime stones with the diameters of 40-80mm dropped simultaneously
4
![Page 5: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/5.jpg)
Comparison of distributions of stopped rock positions by experiment and simulation
-0.5
0
0.5
1
1.5
2
2.5
3
-3 -2 -1 0 1 2 3
In th
e di
rect
ion
para
llel w
ith th
e sl
ope(
m)
In the direction perpendicular to the slope(m)
ExperimentDEM
Y Ax
is
Black points are experiment and red points are dem.
Of course they are not corresponding with one by one accurately, but the range of distribution generally correspond. X Axis
5
![Page 6: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/6.jpg)
-3 -2 -1 0 1 2 3 4
0
0.2
0.4
0.6
0.8
1
-4 -3 -2 -1 0 1 2 3
In the direction perpendicular to the slope
CD
F
In the direction parallel with the slope(m)
ExperimentDEM
Comparison of cumulative distributions of stopped rock positions
X axis Y axis
Y axis
X axis
⑥ 6
![Page 7: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/7.jpg)
モデル
・岩塊の形状 ・岩塊の物性 ・斜面,底面の凹凸
・斜面,底面の物性 (コンクリート,表土,アスファルト)
モデル化すべき項目
適用範囲
・単相(間隙水の影響なし)
7
![Page 8: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/8.jpg)
モデル
M1:岩塊の形状->球要素を直径間隔に配置 M2:岩塊の物性+斜底面の物性->反発係数と摩擦係数 M3:斜面,底面の凹凸 ->球要素を忠実に配置
モデル化の方法
8
![Page 9: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/9.jpg)
検証 (Verification)
妥当性確認 (Validation) -> ユーザ
要素モデル (材料特性)
Code Ver. -> プログラマ ① アルゴリズムが正しいか Calculation Ver.->ユーザ ①’ 離散化が正しいか
②
全体系モデル (線形)
Code -> ③ Calculation->③’
④
全体系モデル (非線形)
Code -> ⑤ Calculation->⑤’
⑥
H 実被害との比較-> ⑥
B 時間間隔やメッシュサイズと誤差の関係の調査,エネルギー収支-> ①’ ③ ’ ⑤’
A 理論との比較 -> ①’ ③ ’ ⑤’
C 検証の済んだ他のプログラム結果との比較 -> ① ③ ⑤ ①’ ③ ’ ⑤’
F 弾性材料(範囲)の模型実験,観測結果との比較④ G 非線形の模型実験,観測結果との比較との比較 ⑥
D 創成解->① ③ ⑤ ①’ ③ ’ ⑤’
E 要素試験との比較②
9
![Page 10: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/10.jpg)
U1 実験・観測値のばらつきを参照する(材料試験,模型,実被害)
Uncertainty Qualification 私見
U2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシミュレーション検討を実施しその応答値のばらつきを把握する
U4 異なるモデル間,計算手法間の応答値のばらつきを把握する
・・・
U3 入力の不確かさに対して複数のシミュレーション検討を実施しその応答値のばらつきを把握する
10
![Page 11: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/11.jpg)
Verification
Bounce
Slippage
Rotation
11
![Page 12: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/12.jpg)
岩球体-岩平板 sphere rock – rock base
岩カプセル-岩平板 岩体-モルタル平板
反発係数=0.6
岩球体-アスファルト sphere rock – asphalt base
反発係数=0.45
岩球,直径10cm
反発実験
変動係数0.2程度 12
![Page 13: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/13.jpg)
DEMの接触モデル
:バネ,K
:ダッシュポット,C
:スライダー
:no tension ジョイント
法線方向 接線方向
13
![Page 14: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/14.jpg)
14
( )
+−=⋅==
22 ln
ln22r
rcr
e
emKmKhhccπ
er:反発係数 c:粘性減衰係数
K:ばね係数 m:質量 h:粘性減衰定数
理論式
![Page 15: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/15.jpg)
15
0 0.2 0.4 0.6 0.8 1.0
0.2
0.4
0.6
0.8
1.0co
effic
ient
of r
estit
utio
n, e r
damping factor, h
collision between ball and rigid wall
![Page 16: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/16.jpg)
反発係数0.445
16
![Page 17: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/17.jpg)
Verification to Bounce R=v2/v1=(h2/h1)0.5 (1) R: Coefficient of restitution v1: Velocity at the moment before the collision v2: Velocity at the moment after the collision h1: Initial height h2: Bounce height
h2
Target coefficient of restitution
Element mass (kg)
Spring coefficient (N/m)
Viscous damping coefficient (N·s/m)
0.250 8.78kg 3.67×107 1.45×104 0.445 8.78kg 3.67×107 8.96×103
Table 1 Target coefficient of restitution and analysis parameters
Table 2 Experimental results
Targets results 0.250 0.249 0.445 0.445
検証 妥当性
材料 ①,①´ ②
モデル(線形) ③,③´ ④
モデル(非線形) ⑤,⑤´ ⑥ 17
![Page 18: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/18.jpg)
手法の検証 -反発-
最大反発係数
0.39
0.48
0.54
シミュレーション結果(誤差)
program(a)
0.372(4.7%)
0.475(1.0%)
0.532(1.5%)
program(b)
0.372(4.7%)
0.533(1.3%)
program(c)
0.381(2.3%)
0.487(1.5%)
0.542(0.4%) program(d)
0.371(4.8%)
0.532(1.5%)
1m
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Rebo
und
heig
ht(m
)
Time(s)
program(A)program(C)e=0.48
18
![Page 19: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/19.jpg)
検証 妥当性
材料 ①,①´ ②
モデル(線形) ③,③´ ④
モデル(非線形) ⑤,⑤´ ⑥
時間離散化に対する収束性について 反発係数1のシミュレーションの誤差
横軸:Log10(α)
計算の時間間隔⊿t=α×(m/k)0.5
筆者は,α<0.3としている 反発係数が小さい程誤差が大きくなる
時間積分は LEAP FRAG法なので離散化の次数は1.5次
19
![Page 20: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/20.jpg)
The model of single bounce
20
Irregular bounces of a real rock mass can be expressed by the impaction in spherical surface. (We used fixed ball which size is as same as free ball)
見かけの 反発係数 e=Vn/Vn’
Free ball fall
Ball fixed
Ball fixed
Ball fixed
bounce irregularly
![Page 21: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/21.jpg)
The relationship between maximum restitution coefficient and apparent
restitution coefficient
0
0.2
0.4
0.6
0.8
1
0 0.2 0.4 0.6 0.8 1
Appa
rent r
estit
ution
coeff
icien
t
Maximum restitution coefficient
DEM roughness 2r,+σDEM roughness 2r,averageDEM roughness 2r,-σReal rock type1, averageReal rock type2, averageReal rock type3, averageReal rock type4, averageReal rock type5, average
21
![Page 22: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/22.jpg)
斜面落石実験の再現解析 単体落下n=300,直径の間隔
-0.5
0
0.5
1
1.5
2
2.5
3
3.5
4
-3 -2 -1 0 1 2 3
斜面
勾配
方向
(m)
斜面直行方向(m)
実験(粒径大)
DEM(粒径大)
岩塊の到達位置の分布の比較
350 168
°
180 290
55
x y
x=40 x=0 x= - 40
(cm)
x y x=0
80
Slope
Stone
41° Floor
55
22
![Page 23: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/23.jpg)
斜面落石実験の再現解析 単体落下n=300,直径の間隔
岩塊の到達位置の分布の比較 23
![Page 24: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/24.jpg)
Verification
Bounce
Slippage
Rotation
24
![Page 25: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/25.jpg)
DEMの接触モデル
:バネ
:ダッシュポット
:スライダー
:no tension ジョイント
法線方向 接線方向
25
![Page 26: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/26.jpg)
Verification to slippage and rotation
0.0000
0.0002
0.0004
0.0006
0.0008
0.0010
0.000 0.005 0.010 0.015 0.020 0.025変
位(m)
時間(s)
DEM(program(a)):摩擦角0°
DEM(program(a)):摩擦角10°
理論値:転がらずに滑る
理論解:滑らずに転がる
Chan
ge i
n di
spla
ceme
nt(m
)
Time (s)
Theoretical : sliding without rolling Theoretical : rolling without sliding
:Angle of friction 0° :Angle of friction 10°
Initial condition of analysis: Brown element comes in contact with the fixed
Results of the rotate and slip simulation
60°
26
![Page 27: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/27.jpg)
完全弾性衝突(まさつ0)
衝突前後で鉛直方向の速度vが0となり水平方向に速度vが発生していることを確認
固定球右45°の地点に衝突させる
27
![Page 28: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/28.jpg)
摩擦有
28
![Page 29: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/29.jpg)
Code Verification 「摩擦有」接触している間所定の作用力が発揮されているか
法線方向
荷重-変位関係
荷重-相対速度関係x成分 荷重-相対速度関係z成分
Target coefficient of restitution
Spring coefficient (N/m)
Viscous damping coefficient (N·s/m)
0.445 3.67×107 8.96×103
検証 妥当性
材料 ①,①´ ②
モデル(線形) ③,③´ ④
モデル(非線形) ⑤,⑤´ ⑥
バネ係数 粘性減衰係数
29
![Page 30: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/30.jpg)
接線方向
荷重-変位関係
荷重-相対速度関係x成分 荷重-相対速度関係z成分
Target coefficient of restitution
Spring coefficient (N/m)
Viscous damping coefficient (N·s/m)
0.445 3.67×107 8.96×103
検証 妥当性
材料 ①,①´ ②
モデル(線形) ③,③´ ④
モデル(非線形) ⑤,⑤´ ⑥
Code Verification 「摩擦有」接触している間所定の作用力が発揮されているか
バネ係数 粘性減衰係数
30
![Page 31: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/31.jpg)
モデル
M1:岩塊の形状->球要素を直径間隔に配置 衝突時の挙動評価のため
モデル化の方法
堆積時の影響は?
ガラスビーズ等の球の粒状体に比べ,砂等凹凸のある粒子はインターロッキング効果によりせん断強度が大きくなる
31
![Page 32: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/32.jpg)
実験装置②( Round robin test )
箱の内部に粒状体を投入し,側面の壁を下方へ移動させることで安息角を発生させる. 安息角が形成されていく過程も撮影可能. 山口大 中田先生,梶山先生
32
![Page 33: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/33.jpg)
0 10 20 30 40 50 60 70 80 90 10015
20
25
30
35
0 10 20 30 40 50 60 70 80 90 1000.0
2.5
5.0
7.5
10.0
DB5, HB=0.5WB, HL8experiment
Mean angle of reposeSample standard deviation
Mea
n an
gle
of r
epos
e (o )
Sa m
p l e s ta nd a rd d e vi at i on ( o)
Particle size - width of base ratio WB/Dp
Comparison of experiment and analysis for repose angle
HL≈ 1 HL≈ 1
HL≈ 1
細かいガラスビーズ(球)の安息角は25度 33
![Page 34: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/34.jpg)
Comparison of experiment and analysis for repose angle
HL≈ 1
砂(非球)の安息角は33度以上 34
![Page 35: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/35.jpg)
検討に用いるDEMの接触モデル
CUNDALLの接触モデル
:バネ
:ダッシュポット
:スライダー
:no tensionジョイント
法線方向 接線方向
:バネ
:ダッシュポット
:スライダー
:no tensionジョイント
法線方向 接線方向
Kn Ks
+ R
δ:R×μr
F
M
F*
Mr Mr=F*×δ
転がり摩擦
阪口モデル 35
![Page 36: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/36.jpg)
Round robin testのシミュレーション
36
![Page 37: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/37.jpg)
転がり摩擦0.0 転がり摩擦0.1 転がり摩擦0.05
転がり摩擦のパラメトリックスタディ
検証 妥当性
材料 ①,①´ ②
モデル(線形) ③,③´ ④
モデル(非線形) ⑤,⑤´ ⑥ 37
![Page 38: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/38.jpg)
実被害のシミュレーション
Bedrock collapse of Shono, Erimo-cho in 2004 38
![Page 39: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/39.jpg)
実被害のシミュレーション
39
![Page 40: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/40.jpg)
転がり摩擦のパラスタ
(a)Rolling friction 0 (b)Rolling friction 1.0 (c)Rolling friction 2.0 (d)Actual damage
Coeficient of Ristitution 0.1 0.1 0.1 0.1 actualRotational Friction 0 0.1 0.15 0.2 survey
line1 0.22 0.38 0.47 0.53 0.43line2 0.36 0.34 0.53 0.57 0.51line3 0.40 0.37 0.54 0.66 0.53line4 0.38 0.42 0.60 0.69 0.60
average 0.34 0.37 0.53 0.61 0.52
Critical repose angle by survey line
40
![Page 41: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/41.jpg)
まとめ
検証 妥当性 材料 ①,①´ ② モデル(線形) ③,③´ ④ モデル(非線形) ⑤,⑤´ ⑥
41
![Page 42: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/42.jpg)
課題
• 自由な要素間衝突のVelification ->③,③´,⑤,⑤´ • アスファルト,表土に対するValidation • 斜面の凹凸に対するValidation • ④は?
42
![Page 43: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/43.jpg)
重量 1.60t,形状 多面体,底面形状 平底,落下高さ 5m,角落し
43
![Page 44: 個別要素法に関する検証と 妥当性確認€‹別...Uncertainty Qualification 私見 U 2 要素モデルのV.V.の不確かさに対して取り得る範囲内で複数のシ](https://reader030.fdocuments.net/reader030/viewer/2022012003/60af72909f6cae54d31956aa/html5/thumbnails/44.jpg)
参考文献 • 中瀬仁・曹国強・田部井和人・栃木均・松島亘志;個別要素法による原子
力発電所周辺の地震起因性斜面崩落挙動のモデル化と適用性;土木学会論文集A1(構造・地震工学),Vol.71,No.4(地震工学論文集第34巻),I_476-I_492,2015.
• 中瀬仁・岩本 哲也・曹国強・田部井和人・阪口秀・松島亘志;個別要素法簡易モデルによる地震起因性斜面崩落土の堆積範囲評価法の提案;土木学会論文集A1(構造・地震工学),Vol.73,No.4(地震工学論文集第36巻),I_694-I_703,2017.
• 栃木均:地震時崩落岩塊の到達距離に関する影響要因の検討-斜面崩壊を想定した振動台実験と二次元個別要素法解析による影響予測手法の開発,電力中央研究所報告, N08084, 2009.
• 栃木均:地震時崩落岩塊の到達距離に及ぼす岩塊の大きさと形状の影響,電力中央研究所報告, N09021, 2010.
• The effect of initial conditions on the variation of angle of repose simulation using a Discrete Element Method, S. Kajiyama & Y. Nakata, Geo-Mechanics from Micro to Macro in Research and Practice (IS-Atlanta 2018) (in print).
44