Dynatel Diagnostic Testing...
Transcript of Dynatel Diagnostic Testing...
269269
Test, Measurement and Facilities Locating
3Dynatel™ Diagnostic Testing Equipment
Subscriber Loop Products 900 Series 270
Subscriber Loop Tester 946DSP 279
Qualification Test Sets 949 and 950 ADSL 284
Advanced Modular System 965AMS 288
How to Search this CatalogThis digital catalog provides you with two quick ways to find the products and information you’re looking for. Just point and click on the bookmarks to the left or the labeled sections of the table of contents. You can also use the “search” function built into Adobe Acrobat to jump directly to any textreference in this document.
Acrobat “Search” function instructions:1. Press CONTROL + F2. When the dialog box appears, type in the word or words you are
looking for and press ENTER.3. Depending on your version of Acrobat, it will either take you directly
to the first instance found, or display a list of pages where the text can be found. In the latter, click on the link to the pages provided.
How to Search the 3M Website3M Solutions ToolThe solutions tool is designed to show you the breadth of the 3M product lineand allow you to drill into specific categories to identify solutions. To use this free Internet support tool, visit: http://www.3M.com/Telecom.
270 www.3MTelecommunications.com 800-426-8688
3M™ Dynatel™ Subscriber Loop Test Products900 Series
Rugged and portable for harsh environments, Dynatel 900 series test sets offer the right mix of
functions, from loop diagnostic routines to fault locating, transmission testing and combination
test/terminal capabilities.
Subscriber Loop Analyzer965DSP
The 965DSP analyzer is a microprocessor-controlled integrated test set that provides full-
featured POTS, wideband and DSL-specific testing. The functions include fault location and
repair verification on twisted-pair and drop cables (utilizing capacitance bridge, resistance
bridge and Time Domain Reflectometer (TDR) functions).
The 965DSP analyzer executes a wide range of individual tests, or performs automatic test
routines to categorize and sectionalize problems. The hand-held set is housed in a lightweight,
ergonomically designed case for portability and ease of handling. It is weather-resistant and
weighs only 4.3 pounds (1.95 kg) with battery, test leads and soft case.
271
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
PRODUCT REFERRAL GENERATOR
Accessories and Replacement Parts . . . . . . . . . . pg. 282
Subscriber Loop Analyzer965DSP/SA
The 965DSP/SA subscriber loop analyzer delivers all the
multi-function capabilities of the 965DSP tester and provides a
spectrum analyzer and E, F and G noise-weighted filters. Wideband
noise measurements are made with the E (ISDN/ISDL), F (HDSL) and G
(ADSL) filters. The spectrum analyzer test function enables the
operator to view the DSL frequency spectrum and identify spectral
interferers such as crosstalk noise generated by other services.
Subscriber Loop Analyzers965DSP/ADSL and 965DSP/SA/ADSL
The 965DSP/ADSL and 965DSP/SA/ADSL subscriber loop analyzers
feature an Alcatel™ MTK-20150 modem chipset in the proven 965DSP
platform. The 965DSP/ADSL tester provides active ADSL testing to
address the growing number of residential and business ADSL
customers. It delivers all the multi-function capabilities of the 965DSP
tester plus the testing functions of the ADSL modem.
The 965DSP/SA/ADSL test set adds comprehensive DSL parametric
measurements to this integrated solution. Extended loss measurement
ranges, spectrum analyzer and E, F and G filtered wideband noise
measurements complete this comprehensive family of rugged
loop testers.
The units are weather resistant and weigh only three pounds (4.5 lbs.
with test leads and soft case). Preserving the rugged dependability of
all Dynatel products, the ADSL option incorporates a durable “spacer”
element to the current 965DSP molded plastic case to permit easy and
robust expansion of the ADSL circuit board.
Far End Device II
Designed to provide remote controlled far end testing assistance
during subscriber loop testing, the far end device II is a companion to the
Dynatel 965DSP family of subscriber loop analyzers where the “one
person out” concept has been implemented. The FED device can
enhance technician productivity by connecting to the far end of a cable
pair to enable diagnostic testing from the near end using the DTMF
signaling capability of the 965DSP, 965DSP/SA, 965DSP/ADSL and
965DSP/SA/ADSL test sets.
3M™ DYNATEL™ SUBSCRIBER LOOP TEST PRODUCTS 900 SERIES
272
Subscriber Loop Tester 945DSP
The Dynatel 945DSP subscriber loop tester is a microprocessor-
controlled test set that provides full-featured POTS testing. The tester
performs a wide range of voice band tests to analyze problems on
twisted-pair cables. Weather-resistant and weighing only 1 pound,
the hand-held 945DSP test set is housed in a lightweight case for
portability and ease of handling.
KIT CONTENTS
SUBSCRIBER LOOP TEST PRODUCTS 900 SERIES
PRODUCT DESCRIPTION 965DSP 965DSP/SA 965DSP/ADSL 965DSP/SA/ADSL 945DSP
Standard Accessories
Analyzer • • • • •
Nickel metal hydride battery pack • • • •
AC adapter • • • •
Specified test cables • • • • •
Alkaline battery holder • • • •
Conductor strap • • • •
Wire gauge • • • •
Self-test circuit board • • • •
Instruction manual • • • • •
ADSL modem Optional Optional • •
Spectrum analyzer Optional • Optional •
Specified batteries 4 alkaline AA
1030 conductor gauge 054007-31253 054007-31253 054007-31253 054007-31253 054007-31253
Alkaline battery holder/adapter 051138-57685 051138-57685 051138-57685 051138-57685 —
110/220 VAC adapter 051138-58628 051138-58628 051138-58628 051138-58628 —
Softcase (model 1151) 051138-87178 051138-87178 051138-87178 051138-87178 051141-04458
Nickel metal hydride battery pack 051138-57686 051138-57686 051138-57686 051138-57686 —
1144 black/red test lead, 051138-57648 051138-57648 051138-57648 051138-57648 051138-57648alligator, bed-of-nails
1142 blue/yellow test lead, 051138-57649 051138-57649 051138-57649 051138-57649 —alligator, bed-of-nails
1143 green test lead, 051138-57650 051138-57650 051138-57650 051138-57650 051138-57650alligator, bed-of-nails
Shorting strap, alligator 051138-58529 051138-58529 051138-58529 051138-58529 —
Optional Accessories
Black/red test lead, 4 mm banana 051138-57608 051138-57608 051138-57608 051138-57608 —
Blue/yellow test lead, 4mm banana 051138-57610 051138-57610 051138-57610 051138-57610 —
Green test lead, 4mm banana 051138-57612 051138-57612 051138-57612 051138-57612 —
Shorting strap, 4 mm banana 051138-58532 051138-58532 051138-58532 051138-58532 —
Video training tape 054007-71941 — — — —
Cigarette lighter adapter 051138-57744 051138-57744 051138-57744 051138-57744 —
IR adapter cable 051138-58764 051138-58764 051138-58764 051138-58764 —
Far End Device FED II 1342 with alligator clips 051138-87639 051138-87639 051138-87639 051138-87639 —
Far End Device FED II 1343 051138-87640 051138-87640 051138-87640 051138-87640 —(bed-of-nails test clips)
Far End Device FED II 1344 (single needle) 051138-89794 051138-89794 051138-89794 051138-89794 —
3M™ DYNATEL™ SUBSCRIBER LOOP TEST PRODUCTS 900 SERIES
273
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
FEATURES
3M™ DYNATEL™ SUBSCRIBER LOOP TEST PRODUCTS 900 SERIES
FEATURES 965DSP 965DSP-B 965DSP/SA 965DSP/ADSL 965DSP/SA/ADSL 945DSP
Resistance fault locate • • • • •
Open fault locate • • • • • •
Load coil count • • • • • Optional
Longitudinal balance • • • • • •
Caller Identification (CID) • • • • •
Split fault locate • • • •
Voltage measurement • • • • • •
Tone source • • • • • •
Current measurement • • • • • •
Ohms measurement • • • • • •
Soak test • • • • • •
Ohms-to-distance conversion • • • • •
Loss measurement • • • • • •
Noise measurement • • • • • •
Ringers count • • • • • Optional
Self-test and self-calibration • • • • •
Wideband noise/loss for • •ISDN and xDSL
Line prequalification tests for • • • • •basic rate ISDN service
TDR • • • •
IR port (communication port) • • • • •
Stored results internal memory • • • • •
Communications craft set • • • • •
Measurement units Feet, meters, Feet, meters, Feet, meters, Feet, meters, Feet, meters, Feet, meters,Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit,
Celsius Celsius Celsius Celsius Celsius Celsius
Graphic display (backlit) • • • • • •
Auto diagnostic DC testing (loop) • • • • •
Auto diagnostic AC testing • • • • •(transmission)
High insulation resistance test • • • • •
Resistance difference and • • • • •loop resistance
Spectrum analyzer Optional • • Optional •(includes E, F, G noise filters)
Fast kick test • • • • •
Onboard operating instructions • • • • •
ADSL active modem testing Optional Optional Optional • •
274 www.3MTelecommunications.com 800-426-8688
ORDERING INFORMATION
3M™ DYNATEL™ SUBSCRIBER LOOP TEST PRODUCTS 900 SERIES
965DSP-A 965DSP-B 965DSP-A/SA 965DSP-A/ADSL 965DSP-A/SA/ADSL 945DSP
Packaging 1/cs. 1/cs. 1/cs. 1/cs. 1/cs. 1/cs.
Minimum order 1 each 1 each 1 each 1 each 1 each 1 each
Nickel metal hydride batteries, bed-of-nails clips 051138-57603 051138-58643 051138-88358 051115-14490 051115-14488 —
Nickel metal hydride batteries, bed-of-nails clips and 3M DynatelFar End Device 1343 051138-89791 051138-89790 051115-14740 — 051115-18506 —
Nickel metal hydride batteries, bed-of-nails clips and AC/DC chargers — — 051115-16144 — — —
Nickel metal hydride batteries, bed-of-nails clips, AC/DC chargers and1343 far end device — — 051115-16143 — — —
Nickel metal hydride batteries, 4mm banana plugs and multi-language 051138-70088 051138-87781 051138-87782 051115-14492 051115-14493 —
Nickel metal hydride batteries and single-needle clips — — — 051115-14491 051115-14489 —
Bed-of-nails clips/c-message weighting — — — — — 051115-104452
Bed-of-nails clips/c-message weighting,w/ soak, ringers and load count — — — — — 051115-17989
275
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
ELECTRICAL SPECIFICATIONS
3M™ DYNATEL™ SUBSCRIBER LOOP ANALYZER 965DSP (A, B AND SA)
MAIN FUNCTIONS RANGE RESOLUTION ACCURACY
Voltage (DC) 0 to 99.9 V 0.1 V 1% ± 0.5 V100 to 300 V 1 V 3%
Voltage (AC) 0 to 99.9 V 0.1 V 1% ± 0.5 V100 to 250 V 1 V 3%
Current 0 to 59.9 mA 0.1 mA 1% ± 0.3 mA60 to 110 mA 0.1 mA 2%
Resistance and soak test 0 to 9999 Ω 1 Ω 1% ± 5 Ωwith CO voltage 0 to 9999 Ω 1 Ω 1% ± 50 Ω
10 k to 99.9 kΩ 0.1 kΩ 1%100 k to 999 kΩ 1 kΩ 3% 1 M to 9.9 MΩ 0.1 MΩ 3% 10 M to 99 MΩ 1 MΩ 5% 100 M to 990 MΩ 10 MΩ 10%
Opens (no noise) 0 to 3,000 ft. (0 to 1000 m) 1 ft. (1 m) 1% ± 3 ft. (1 m)3,000 to 10,000 ft. (1 km to 3 km) 1 ft. (1 m) 3%10,000 to 50,000 ft. (3 km to 15 km) 10 ft. (10 m) 5%50,000 to 100,000 ft. (15 km to 30 km) 100 ft. (100 m) 10%
RFLFault range 0 to 20 MΩ — —Resistance to 0 to 99.99 Ω RTS 0.01 Ω 0.1% of RTS ± 0.01 Ωfault (no noise) 100 to 999.9 Ω RTS 0.1 Ω 0.2% of RTS ± 0.01 Ω
1 kΩ to 7 kΩ RTS 1.0 Ω 1.0% of RTS ± 0.01 Ω
Loss (and frequency)with 600 Ω Zin -40 to +10 dBm, 200 to 20kHz 0.1 dB, 1Hz, 1kHz 0.5 dB, 1%with 135 Ω Zin -50 to +2 dBm, 20 k to 1200 kHz 0.1 dB, kHz 2 dB, 1%
Noise metallic 0 to 50 dBrnc (-90 to -40 dBm0p) 1 dB 2 dB
Noise to ground 40 to 100 dBrnc (-50 to 10 dBm0p) 1 dB 2 dB
Longitudinal balance 0 to 70 dB 1 dB 2 dB70 to 85 dB 1 dB —
Tone outputID 200 to 1000 Hz, fixed level — —Precision - 600 Ω Zout 200 to 9999 Hz, -20 to +1 dBm 1 Hz, 0.1 dB 1% Hz, 0.2 dB
10 k to 19.99 kHz, -20 to +1 dBm 1 Hz, 0.1 dB 2% Hz, 1 dBWideband - 135 Ω Zout 20 k to 1200 kHz, 0 dBm 1 kHz 1 dB
Dial mode DTMF, Pulse — —
TDRUnder typical conditions a 100, 200, 500, 1,000, 2,000 1 ft. (1 m) 0.6% range500 ft bridge tap can be seen 5,000, 10,000, 20,000, 30,000 ft,at 18,000 ft on a 20,000 ft (30, 60, 150, 300, 600, 1,50024 AWG cable. (150 m bridge 3,000, 6,000, 10,000 m)tap at 5500 m on a 6000 m 0.5 mm cable).
Pulse width 5 nS, 34 nS, 235 nS, 1600 nS — Fixed valuesVelocity input 0.50 to 0.99 (150 to 299 m/µs) 0.01 (1 m/µs) —Modes Single trace, dual trace, — —
differential, memory, crosstalk, peak
Auto-tests Same specifications as full tests See above See above
SA Functions (ISDN/IDSL, HDSL, ADSL)
ISDN (2B1Q)Link test Active/inactive — —Error test (US and Canada only) Near-end and far-end block errors 1 block error 1 block errorDSL Loss (and frequency) -75 to +5 dBm, 20 kHz to 1200 kHz 1 dB 1 dBwith 100 Ω or 135 Ω ZinNoise (with E, F, and G filters)Metallic with100 Ω/135 Ω Zin +10/+20/+30 to +90 dBrn 1 dB 2 dBLongitudinal with 10 kΩ Zin +40/+50/+60 to + 120 dBrn 1 dB 2 dB
Wideband Spectrum Analyzer
Range 10 kHz to 1.8 MHz — —5 spans from 120kHz to 2 MHz — —Dynamic range -90 to +10 dBm — —Frequency resolution 1% of span — —Input impedance 135Ω
276 www.3MTelecommunications.com 800-426-8688
SPECIFICATIONS
3M™ DYNATEL™ SUBSCRIBER LOOP ANALYZER 965DSP (A, B AND SA)
PHYSICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS
Size H x W x D in. (cm) 10.3 x 4.7 x 3.2 (26.2 x 12 x 8.1) Operating temperature 0° to 140°F (-18 to 60°C)
Net weight lbs. (kg) 4.3 (1.95) with battery Storage temperature -40° to 165°F (-40 to 75°C)and soft case
Shipping weight lbs. (kg) 7.8 (3.54) Humidity 0 to 95%, non-condensing
Material GE Xenoy
ACCESSORIES DESCRIPTION
Test leads U.S. – 5 ft. (1.5 m) test leads with 2 mm gold-plated banana plugs on one end and chrome-plated alligator clips on other end (black/red, blue/yellow, green)European – 5 ft. (1.5 m) test leads with 2 mm gold-plated banana plugs on one end and 4 mm gold-plated bananaplugs on other end (black/red, blue/yellow, green)
RFL strap U.S. – 1.5 ft. (0.5 m) with alligator clips on endsEuropean – 1.5 ft. (0.5 m) with banana plugs on ends
AC/DC battery charger 100-250 VAC (50/60 Hz) input; 12 VDC (1 A) output. For charging only. Do not operate when using charger.
Soft case Heavy-duty fabric case for unit and test leads
Battery holder Plastic holder for 6 AA (LR6) batteries
Battery pack Custom 1.5 amp-hour nickel metal hydride
TOOLBOX FUNCTIONS RANGE RESOLUTION ACCURACY
Load coil count 0 to 5 1 ±1
Ohms/distance calculator 0 to 9999 ohms 0.01 Ω —0 to 99999 ft (0 to 30 km) 1 ft (0.1 m) —
Caller ID (U.S. and Canada only) Date, time, number, name — —Carrier level -4 to -32 dBm 1 dBm 2 dBm
Self-calibrate Pass/fail — —
Loop resistance 0 to 99.9 Ω 0.01 Ω 0.1% ± 0.01 Ω100 to 999.9 Ω 0.1 Ω 0.2% ± 0.01 Ω1000 to 7000 Ω 1 Ω 1.0% ± 0.01 Ω
Resistance difference 0 to 99.99 Ω 0.01 Ω 1% of loop resistance ± 0.01 Ω
Ground resistance 5 to 500 Ω 1 Ω 1% ± 1 Ω
K-TestLoop resistance 0 to 7K Ω __ __Fault ratio (Fault Res1) > twice (Fault Res2) __ __Resistance to fault 0 to 99 Ω 0.01 Ω 5%(no noise) 100 to 999 Ω 0.1 Ω 5%
1K to 3.5K Ω 1 Ω 5%
Stored results (Autotest and TDR) 100 results of each, minimum — —
Ringers 0.0 to 4.0 0.1 ringer equivalent General specifications
GENERAL SPECIFICATIONS
Ruggedness Survives 5 ft. (1.5 m) drop in soft case
Water-resistance Splashproof; may be used in light to moderate rain
Standards Meets FCC part 15, class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity) EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe. Built to ISO9001 certification for manufacturing facilities. Built to Bellcore (Telcordia Technologies) TSY000078 manufacturing methods. Meets UL50 Rain Test.
Language English and multi-languages
Units Feet or meters, Fahrenheit or Celsius, dBrnC or dBm0p, m/uS or Vp
Battery life Rechargeable battery pack, 12 hours typical usage (no backlight), 4 hours typical (with backlight); typical usage defined as 30 minutes on, 30 minutes off
Charging time Minimum 2.5 hours from low to full
Keypad 24-key membrane keypad with tactile feedback
Display in. (cm) 2.5 x 2.5 (74 x 74), 192 by 192 pixel resolution, backlight
Note: Routine calibration is not recommended or required.
277
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
SPECIFICATIONS
3M™ DYNATEL™ SUBSCRIBER LOOP ANALYZER 965DSP SERIES WITH ADSL MODEM
PHYSICAL SPECIFICATIONS
Size H x W x D in. (cm) 10.3 x 4.6 x 3.75 (26.2 x 11.7 x 9.5)
Net weight lbs. (kg) with soft case and test leads 4.5 (2)
Shipping weight lbs. (kg) 8 (3.6)
ENVIRONMENTAL SPECIFICATIONS
Operating temperature 0˚ to 140˚ F (-18˚ to 60˚ C)
Storage temperature -40˚ to 165˚ F (-40˚ to 75˚ C)
Humidity 0 to 95%, non-condensing
Vibration Random 3-axis vibration for 20 minutes
Water resistance Meets UL50 Rain Test
Shock 10 drops on corners and sides from 30 in. (without soft case) and 10 drops on corners and sides from 60 in. (with soft case)
Safety IEC950
OPERATIONAL SPECIFICATIONS
Product will incorporate all the features of the 965DSP and/or 965DSP/SA subscriber loop analyzers at the accuracy currently specified for these products (see 965DSP family product documentation). ADSL datalink capability is limited to link synchronization. No ‘PING’ or data application capability is provided. Modem will initiate a connection with the far-end under operator command. Status messages indicating link progress will be returned.
ANSI/ITU standards supported ITU G.992.2 (G.Lite), ITU G.992.1 (G.DMT), ANSI T1.413 Issue 2
ADSL modes ANSI, G.DMT, G.Lite, MultiMode
Reach Designed to synchronize at distances from 0 ft. to 18,000 ft.
Statistics Actual and maximum upstream and downstream connect ratesUpstream and downstream percent used ADSL line capacityUpstream and downstream noise marginUpstream and downstream signal attenuationUpstream and downstream power levelsModem manufacturer identification (ANSI mode only)Upstream and downstream FEC, CRC, and HEC countsAlarm codes including LOS, LOF, LCD and LOMGraphical display of bits-per-bin count for the DMT signal
Operating modes Captured – Modem auto-disconnects from the far-end after statistics gatheredContinuous – Modem gathers statistics for up to ten minutes
278 www.3MTelecommunications.com 800-426-8688
SPECIFICATIONS
3M™ DYNATEL™ SUBSCRIBER LOOP TESTER 945DSP
MEASUREMENT FUNCTION RANGE RESOLUTION ACCURACY ±
Size H X W X D in. (cm) 7.5 x 4 x 1.5 (19 x 10.2 x 3.8)Cord length ft. (m) 5 (1.5)
Net weight lbs. (kg) 1 (.5)
Shipping weight lbs. (kg) 1.5 (0.7)
Operating temperature -30° to 140° F (-34° to 60° C)
Storage temperature -40° to 140° F (-40° to 60° C)
Relative humidity 0 to 95%
Display in. (cm) 2.25 x 1.25 (5.7 x 3.2)
AC voltage 0 to 75 V 1.0 V ±1 V75 to 250 V 1.0 V ±3 V
DC voltage 0 to ±100 V 1.0 V ±1 V±100 to ±350 V 1.0 V ±3 V
DC current 0 to ±110 mA 1.0 mA ±2 mA
Resistance 0 to 999Ω 1Ω ±5 Ω or 3%1kΩ to 9.9KΩ 100Ω ±3%
10kΩ to 999KΩ 1 kΩ ±3%1MΩ to 9.9MΩ 100kΩ ±3%10MΩ to 30MΩ 1 MΩ ±10%
Noise metallic (with C-message weighting*) 0 to 60 dBrnc 1 dB ±2 dB
Noise to ground (with C-message weighting*) 40 to 100 dBrnc 1 dB ±2 dB
Opens 0-9999 ft. 1 ft. ±20 ft., ±5%10k to 20k ft. 1k ft. ±5%0 to 6000 m 1 m ±6 m, ±5%
Ground resistance 0 – 50 Ohm 1Ω ±3 Ω
Loop loss -50 to +10 dBm 1 dB ±1 dB
Frequency during loss,single frequency only 200 to 5,000 Hz 1 Hz ±3 Hz
Longitudinal balance 0 to 65 dB 1 dB ±2 dB
Tone outputID 577.5 HzPrecision - 600 ΩZout 404,1004,2804Hz 0 ±.5 dBm
Power source 4 - Disposable Alkaline (AA or LR6) but will accept user provided Ni-Cad or NiMH batteries with user provided external charger
Typical battery life Alkalines: 40 hours of typical use, 15 hours continuous
Over voltage protection 450 VDC, 250 VAC Between any leads to protect the internal circuit.
Vibration Random 3-axis vibration at 12.5Grms for 20 minutes
Rain proof/splash proof Meets UL50, rain test
Shock 10 drops on corners and sides from 30 in. without the soft case and 10 drops from 60 in. in soft case
EMI/EMC Meets FCC part 15, Class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity),
EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe.
Keypad ON/OFF switch, numeric key pads, which also function as the function keys.
Function keys V (voltage), mA (loop current/ground resistance), Ω (resistance/soak test), OPENS, TONE, DB, AUTO Cal. Two non-testing function keys are ‘*’ and ‘#’.
*Psophometric filter is available as a special order.
279
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
3M™ DYNATEL™ SUBSCRIBER LOOP TESTER 946DSP
The 946DSP subscriber loop tester has all the features of the current
945DSP tester with the following additions specific to acceptance
testing of new telephone installations:
The ability to count up to 5 load coils, auto-test: V (T,R,Gnd), mA,
Ground Resistance, Ohms (T,R,Gnd), Opens (T,R,Gnd), Load Coil
Count, Noise, PI, LB and Loss (up to 10 frequencies), storage of up to
10 full sets of test results including the ability to review any of the 10
results in the field on the 946DSP, and upload stored results to a PC
using an adapter cable.
FUNCTION DESCRIPTION
Voltage (V) Detects and measures the presence of central office or foreign DC and AC voltages on R-T, R-G and T-G.
Current (mA) Measures DC loop current.
Ground resistance When measuring mA, press the set up key to measure and display the
ground path resistance (when supported by the switch).
Resistance test Measures conductor and insulation resistance up to 30 megohms. Accurate readings in the presence of foreign voltage. Full autoranging.
Insulation soak test Monitors the leakage resistance from the test leads to ground and indicates changes in the insulation resistance over time in the presence of high voltage. Increasing resistance is an indication of a wet fault and decreasing resistance is an indication of oxidation, which is breaking down and becoming more conductive.
Opens Measures the open length of tip, ring or cable pair at distances up to 100,000 ft, (30 km).
Tone Provides 577 Hz ID tone for conductor identification, and 404, 1004 and 2804 Hz precision tones for determining circuit loss.
Loss Measures voiceband loss up to 5KHz, displaying frequency and level.
Noise Measures circuit noise and power influence, and displays calculated balance. C-Message Weighting is used in the U.S. and Canada, and a Psophometric Filter where ITU (CCITT) Standards are used.
Longitudinal balance This test provides active measurement of line balance.
Dial key Allows storage of 10-14 digit numbers for testing of active lines.
Load coils Counts up to 5 load coils on an unterminated pair.
Result summary screen This screen shows the results from last V, mA, Ground Resistance, Ohms, Opens, Load Coil Count, Noise, PI, LB and Loss test in a tabular form for easy analysis. If desired, these results can then be saved to one of 10 result storage locations.
Result storage Storage will be provided for 10 sets of results. Each set will include a 10 digit numeric identifier and the following measurements: V (T-R), V (T-G), V (R-G), mA, Ground Resistance, Ohms (T-R), Ohms (T-G), Ohms (R-G), Open Length (T-R), Open Length (T-G), Open Length (R-G), Load Coil Count, Noise, Power Influence, Longitudinal Balance and Loss at up to 10 different frequencies.
Result review Means will be provided to review any result set on the screen of the 946DSP.
Result upload Results can be uploaded to a PC through the test leads using an adapter and pc software provided with the unit.
280 www.3MTelecommunications.com 800-426-8688
ELECTRICAL SPECIFICATIONS
3M™ DYNATEL™ SUBSCRIBER LOOP TESTER 946DSP
FUNCTION RANGE RESOLUTION ACCURACY* TEST LEADS
Voltage (AC) 0 to 75 VAC 1 V ±1 V R-T, R-G, T-G
75 to 250 VAC 1 V ±3 V R-T, R-G, T-G
Voltage (DC) 0 to ± 100 V 1 V ±1V R-T, R-G, T-G
±100 to ±350V 1 V ±3V R-T, R-G, T-G
Loop current (DC) 0 to ±110 mA 1 mA ±2m A R-T (Zin = 430 Ω)
Loop resistance 0 to 999 Ω 1Ω ± 5 Ω or 3% R-T, R-G, T-G
Leakage resistance 1kΩ to 9.9kΩ 10 Ω ± 3% R-T, R-G, T-Gand insulation soak 10kΩ to 99.9kΩ 100 Ω ± 3% R-T, R-G, T-G
100kΩ to 999kΩ 1kΩ ± 3% R-T, R-G, T-G1MΩ to 9.9MΩ 100kΩ ± 3% R-T, R-G, T-G10MΩ to 30MΩ 1MΩ ± 10% R-T, R-G, T-G
Loop loss -50 to +10 dBm 1 dB ±1 dB R-T (Zin=600)
200 to 5000 Hz
Noise metallic with 0 to 60 dBrnc 1 dB ±2 dB R-T (Zin=600)C-message weighting**
Noise to ground with 40 to 100 dBrnc 1 dB ±2 dB R and T-G(Zin=100K)C-message weighting**
Opens 0 to 9,999 ft. 1 ft. ± 20 ft. ±5% Ring, tip, mutual
10,000 to 99,999 ft 100ft +/- 5%(0 to 9,999 m) (1 m) ( ± 6m, ±5%)
(10,000 to 30,000m) (100m) (+/- 5%)
Frequency during loss, 200 to 5,000 Hz 1 Hz ±3 Hz R-Tsingle frequency only
Longitudinal balance 0 to 65 dB 1 dB ±2 dB TR-G
Ground resistance 0 to 50 Ω 1 Ω ± 3 Ω
Load coils Count 0,1,2,3,4 or >4 coils +/- 1 coil
Note: First load must be >3000’ from the unit and 3000’ of cable must extend beyond the last load coil for an accurate count
*Percent of reading
**C-message specification has additional frequency dependent tolerance. Refer to “Subscriber Loop Transmission Test Set Specification”, Bell System PUB 55020, January 1982.
OUTPUT FREQUENCY AMPLITUDE ATTACHMENT REMARKS
ID tone 577.5 Hz 8 Vpp R-T Squarewave, interrupted Precision tone 404,1004, 0 ±0.5 dBm R-T 600Ω source, continuous
2804 Hz sinewave. <10%THD
281
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
PHYSICAL SPECIFICATIONS3M™ DYNATEL™ SUBSCRIBER LOOP TESTER 946DSP
SIZE WEIGHT SHIPPING DISPLAY(H X W X D) IN. (CM) (INCLUDING BATTERIES) WEIGHT SIZE
946DSP (7.5"H x 4"W x 1.5"D ) 1 lb. with battery and soft case 1.5 lbs (0.7 kg) 2.25" x 1.25" 19 cm x 10.2 cm x 3.8 cm (0.5 kg) (5.7 cm x 3.2 cm)
ENVIRONMENTAL SPECIFICATIONSSUBSCRIBER LOOP TESTER 946DSP
Operating temperature 0° to 140°F (-17° to 60°C)
Storage temperature -40° to 140°F (-40° to 60°C)
Humidity 0 to 95%
Vibration Random 3-axis vibration at 12.5 Grms for 20 minutes
Rain proof/splash proof Meets UL50, Rain test
EMI/EMC Meets FCC part 15, Class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity), EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe.
GENERAL SPECIFICATIONSSUBSCRIBER LOOP TESTER 946DSP
Batteries 4 - disposable alkaline (AA or LR6) but will accept user providedNi-Cad or NiMH batteries with user provided external charger
Battery life Alkaline: up to 25 hours continuous, dependent on temperature and use of backlight.
Dialing DTMF and pulse dialing - 10 number storage 12 hours typical use (50% on/off measures voltage)
Display Graphical LCD with universal icons
Test leads Removable red, black and green leads; 5 ft. (1.5 m)
Over voltage protection 450 VDC, 250 VAC. between any leads to protect the internal circuit
Keypad Field-rugged, waterproof membrane keypad
Function keys V (voltage), mA (loop current/ground resistance), ohms(resistance/soak test), OPENS, TONE, DB, AUTO Cal.Two non-testing function keys are ‘ * ’ and ‘#’
Note: Routine calibration is not recommended or required** Percent of reading** Psophometric filter is available as a special order
282 www.3MTelecommunications.com 800-426-8688
3M™ DYNATEL 900 SERIES SUBSCRIBER LOOP TEST PRODUCT ACCESSORIESPRODUCT NUMBER/PACKAGING INFO
1146PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-57744
1149PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-57685
1145PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-58628
1148PKG. (LBS.): 1 EACH (0.44)MIN. ORDER: 1 EACHUPC: 051138-57686
1151PKG. (LBS.): 1 EACH (0.20)MIN. ORDER: 1 EACHUPC: 051138-87178
1181PKG. (LBS.): 1 EACH (3.00)MIN. ORDER: 1 EACHUPC: 051115-15090
1147PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-58529
900-IRPKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-58764
DESCRIPTION
Cigarette Lighter AdapterFor 965DSP tester.
Alkaline Battery HolderFor 900 series tester.
Adapter 110/220 VACFor 965DSP tester.
Nickel Metal Hydride Battery PackFor 965DSP tester.
Soft Carrying CaseFor 965DSP and 965DSP/SA testers.
Soft Carrying CaseFor 965DSP/ADSL tester.
Ground Strap, Shorting, AlligatorFor 965DSP tester.
IR Adapter CableFor 900 series tester.
283
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
3M™ DYNATEL 900 SERIES SUBSCRIBER LOOP TEST PRODUCT ACCESSORIESPRODUCT NUMBER/PACKAGING INFO
1142PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-57649
1143PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-57650
1144PKG. (LBS.): 1 EACH (0.10)MIN. ORDER: 1 EACHUPC: 051138-57648
1342PKG. (LBS.): 1 EACH (2.00)MIN. ORDER: 1 EACHUPC: 051138-87639
1343PKG. (LBS.): 1 EACH (2.00)MIN. ORDER: 1 EACHUPC: 051138-87640
1344PKG.: 1 EACHMIN. ORDER: 1 EACHUPC: 051138-89794
1110PKG.: 1 EACHMIN. ORDER: 1 EACHUPC: 051115-13550
DESCRIPTION
Lead Test, Blue/Yellow Alligator Clip and Bed-of-NailsFor 965DSP tester.
Green Lead Test Alligator Clip and Bed-of-NailsFor 945DSP and 965DSP testers.
Black/Red Lead Test Alligator Clip and Bed-of-NailsFor 945DSP and 965DSP testers.
Far End Device IIUse with 965DSP tester with alligator clips.
Far End Device IIUse with 965DSP tester with bed-of-nails and alligator clips.
Far End Device IIWith alligator clip and long/single needle.
Test Lead with RJ45/Alligator Clip, 7 LeadsFor 1342 far end device II.
284 www.3MTelecommunications.com 800-426-8688
3M™ DYNATEL™ QUALIFICATION TEST SETS949 AND 950ADSL
The 949 and 950ADSL qualification test sets can provide a low-costsolution for POTS testing and verification of ADSL modem connectivity at customer locations.
Rugged Reliable Design
The Dynatel test sets are housed in a light-weight, hand-held casedesigned for ease-of-handling and portability. Each unit weighs less than 2.5 pounds with the rechargeable battery pack included. The Dynatel brand and its distinctive Dynatel yellow color are your assurances of rugged reliability.
ADDITIONAL POTS MEASUREMENT SPECIFICATIONS
QUALIFICATION TEST SET 950ADSL
FUNCTION RANGE RESOLUTION ACCURACY* TEST LEADS
Loop current (DC) 0 to ±110 mA 1 mA ±2mA R-T (Impedance = 430 ø)
Loop resistance 0 ohm to 999 ohms 1 ohm ± 5 ohm ± 3% R-T, R-G, T-G
Loop loss -50 to +10 dBm 1 dB ±1 dB R-T (Impedance = 600 ø)200 to 5000 Hz
Frequency during loss,single frequency only 200 to 5,000 Hz 1 Hz ±3 Hz R-T
Noise metallic withC-message weighting** 0 to 60 dBrnc 1 dB ±2 dB R-T (Impedance = 600 ø)
Noise to ground with C-message weighting** 40 to 100 dBrnc 1 dB ±2 dB R and T-G (Impedance = 100KW)
Opens 0 to 9,999 ft. 1 ft. ± 20 ft. ±5% Ring, tip, mutual10,000 to 99,999 ft 100ft +/- 5%
(0 to 9,999 m) (1 m) (± 6m, ±5%)(10,000 to 30,000m) (100m) (+/- 5%)
Longitudinal balance 0 – 65 dB 1 dB ±2 dB TR-G.
Ground resistance 0 to 50 ø 1 ø ± 3 ø
Load coils Count 0,1,2,3,4 or >4 coils +/- 1 coilNote: First load must be >3000’ from the unit and 3000’ of cable must extend beyond the last load coil for an accurate count
*Percent of reading
**C-message specification has additional frequency dependent tolerance. Refer to “Subscriber Loop Transmission Test Set Specification”, Bell System PUB 55020, January 1982.
GENERAL SPECIFICATIONS
QUALIFICATION TEST SET 950ADSL
POTS test storage 10 Sets of results, each identified with a 10 digit numeric identifier.Stored results can be viewed in the test set.
POTS auto-test Auto-test will run the following tests: V (T, R, G), mA, ground resistance, ohms (T, R, G), opens (T, R, G),load coil count, noise, PI, LB and loss (up to 10 voiceband frequencies).
285
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
3M™ DYNATEL™ QUALIFICATION TEST SETS949 AND 950ADSL
POTS and ADSL Tests
Metallic tests conducted by the 949 and 950ADSL qualification test sets include COand foreign voltage, insulation resistance, loop resistance, and longitudinal balance.
As a tone source, the testers are capable of generating 200Hz and 2MHz sinewave tones. Additional qualification tests include ADSL modem linkup and essential
performance measurements including connect rates, error statistics, and bin-graph. Test sets also have the capability to ping to an ISP. ADSL test results can be
saved and viewed in the unit or uploaded to a computer as needed. The 950 testset can perform a POTS autotest which can be saved and uploaded to a computer.
PRODUCT FEATURES
QUALIFICATION TEST SET
TESTS PERFORMED 949ADSL TEST SET 950ADSL TEST SET
Volts – AC and DC • •
Loop current •
Resistance test • •
Soak test •
Ground resistance •
Opens •
Loss and noise •
Longitudinal balance • •
Dial key •
Load coils •
POTS autotest •
Precision tones to 2MHz • •
ADSL connectivity • •
PING testing • •
FEATURES 949ADSL TEST SET 950ADSL TEST SET
Backlit LCD • •
RJ45 attachment for test leads • •
Rechargeable NiMH battery • •
Serial upload to PC • •
Storage for 200 ADSL results • •
Storage for 10 POTS results •
286 www.3MTelecommunications.com 800-426-8688
GENERAL SPECIFICATIONS
QUALIFICATION TEST SET 949ADSL
Size 60 mm high x 100 mm wide x 200 mm long
Weight Less than 2.5 lb. with battery
Battery NiMH 2.1 Ahr – shrink wrap pack, user replaceable through access door on back of unit
Battery life 8 hours standby (Backlite Off) + 20 full ADSL qualification testsAC/DC adapter connects to the unit through the RJ45 test lead jackThe unit cannot make measurements while powered by the AC/DC adapterAuto shutoff after 5 minutes with no activity, except during charging
Display 64 x 128 pixel, 57 mm x 31 mm viewing area with LED backlight
Test leads Red, black and green leads. 1.5 meter long. Connected to unit via RJ45 jack
Breakdown voltage 360 VDC, 250 VAC. (the unit will be damaged if exposed to voltages exceeding these limits)
Operating temperature -10°C to 60°C except for ADSL and battery charger functions0°C to 60°C ADSL functions (temperatures > 50°C performance could degrade)0°C to 50°C battery charger operation
Humidity 0 to 80% non-condensing
Rain proof/splash proof Conforms to IP42
Shock Will survive 3 foot drop to concrete
Regulatory CE / FCC
ADSL test storage 200 sets of results identified with an alphanumeric labelStored results can be viewed in the test set.
Languages English
RS232 port An RJ45 to DB9 adapter cable is provided to permit connecting the 949 and 950ADSL to a PCThe serial connection supports the following:• Upload of test results to the PC• Field software updates
ADSL MEASUREMENT SPECIFICATIONS
3M™ DYNATEL™ QUALIFICATION TEST SETS 949 AND 950ADSL
ADSL standards ANSI T1.413ITU-T G.992.2 (G.LITE)ITU-T G.992.1 (G.DMT) - Annex A
IP encapsulation LLC SNAP or VC MUX
IP transport protocols DHCPoE – IP on Ethernet over ATMDHCPoA - IP over ATMStaticIPoE – IP on Ethernet over ATMStaticIPoA - IP over ATMPPPoE - PPP over Ethernet over ATMPPPoA - PPP over ATM
PPP authentication CHAP or PAP
Line impedance 100 ohms, nominally
FUNCTION MEASUREMENT ACCURACY
ADSL status Fast rate up/down +/- 1 kbpsInterleaved rate up/down +/- 1 kbpsMax rate up/down +/- 1 kbpsMargin up/down +/- 1 dBAttenuation up/down +/- 1 dBCapacity up/down +/- 1 %
ADSL information FEC errors up/down +/- 1CRC errors up/down +/- 1HEC errors up/down +/- 1Bin graph
ADSL alarms Loss of Signal (LOS)Loss of Frame (LOF)Loss of Power (LOP)Loss of Margin (LOM)
Ping Connection time +/- 10mS
287
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
POTS MEASUREMENT SPECIFICATIONS3M™ DYNATEL™ QUALIFICATION TEST SETS 949 AND 950ADSL
FUNCTION RANGE RESOLUTION ACCURACY* TEST LEADS
AC voltage 0 to 250 VAC ± 1 V ± 2% R-T, R-G, T-G(input resistance = 1M Ohm ± 5%)
DC voltage 0 to 250 VDC ± 1 V ± 2% R-T, R-G, T-G(input resistance = 1M Ohm ± 5%)
Resistance 0 ohm to 999 ohms 1 ohm ± 5 ohm ± 3% R-T, R-G, T-G1k ohm to 9.9k ohms 10 ohms ± 3%
10k ohms to 99.9k ohms 100 ohm ± 3%10k ohms to 999k ohms 1k ohm ± 3%
1M ohm to 9.9M ohms 100k ohms ± 3%10M ohms to 30M ohms 1M ohm ± 10%
Active pair: 0 to -60 VDC R-T voltage, 600 ohm to 7k ohmsInactive pair: 0 to -90 VDC R-T voltage, 600 ohms to 1 Megohm
Longitudinal balance 0 – 65 dB 1 dB ±2 dB TR-G
Precision tone Frequency 404Hz, 1004Hz, 2804Hz (preset) Amplitude 0 ± 0.5 dBm R-TSource Impedance 600 ohms +/- 5%
Frequency 8000 – 2MHz (user settable) +/- 10% Amplitude 0 ± 0.5 dBm R-TSource Impedance 100 ohms +/- 5%
577 Hz intermittent trace tone Amplitude 5V P-P
*Percent of reading
ORDERING INFORMATIONPRODUCT NUMBER DESCRIPTION PKG. (LBS.) MIN. ORDER UPC 051115-
CE100699624 949ADSL qualification test set 1 each (3.60) 1 each 18042
CE100699632 950ADSL qualification test set w/enhanced testing capability 1 each (3.60) 1 each 18073
CE100700687 AC/DC adapter, 120VAC input 1 each 1 each 19407
CE100700695 Test leads 949/950, red/black/green 1 each 1 each 19408
CE100700711 Serial cable 1 each 1 each 19409
CE100700729 Telephone patch cord 1 each 1 each 19410
CE100700737 Soft carry case 1 each 1 each 19411
CE100700745 Rechargeable NiMH battery pack 1 each 1 each 19412
CE100700752 AC/DC adapter, 220VAC – – –
288 www.3MTelecommunications.com 800-426-8688
3M™ Dynatel™ Advanced Modular System 965AMS
The new 965AMS advanced modular system contains every feature of our previous
965 model plus a larger, brighter display that features 3M™ Vikuiti™ Display Enhancement
technology, a user-friendly icon-based interface and rugged field-swappable module.
The external modules can be shared between technicians and allows transmission testing
of a variety of OSP technologies. The platform is available with an optional ADSL2+ modem
module. Development for future modules may include such features as: VDSL2, FTTx fiber
test, VoIP, DS1, DS3 and new technologies yet to come.
289
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
The complete testing platform for all outside plant telecommunications.
This microcomputer-controlled flexible test set family provides
full-featured testing for the triple play—voice, video and data circuits.
Because it’s a Dynatel 965 series tester, the AMS model is easy to use,
requiring minimal training for testing professionals. And because
it emphasizes fault diagnosis and fault location, customer can use
the tester to assist in quick problem solving.
Autotest
The knowledge-based smart autotest function allows
automatic test of active and inactive lines with pass/fail limits. Autotest
capabilities also include expert system analysis of test results with
advice on how to repair or how to locate faults. 3M™ Dynatel Far End
Device FED II and customizable selections of tests are supported
by the autotest feature of the 965AMS platform.
External Modules
965AMS modules support special circuits technicians who work on a
variety of circuit standards during a typical day. Because the modules
are field swappable, the technicians can share them. The ADSL2+
module is currently available. The following is a list of future modem
protocols: VDSL2, FTTx fiber test and VoIP.
Rugged, Weather-Resistant Design
The hand-held 965AMS product is housed in a lightweight,
ergonomically-designed case. The weather-resistant unit weighs
only 5 lbs (2.2kg) and operates on a desktop, on the ground, in aerial
environments and underground locations.
3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
290
PHYSICAL SPECIFICATIONSSIZE (H X W X D) IN. (CM) WEIGHT (INCLUDING BATTERIES)
965AMS (includes ADSL2+ module) 11.5 x 5.75 x 3.25 (29 x 14.5 x 8.3) 5 LB (2.2 KG)
ACCESSORIESPRODUCT NAME DESCRIPTION
Test Leads Five 5-ft (1.5 m) test leads with 2 mm gold-plated banana plugs one end and chrome-plated alligator clips on other end (black/red, blue/yellow, green)Lead styles include bed of nails, no nails, spike and Canadian test leads
European Test Leads Five 5-ft (1.5 m) test leads with 2 mm gold-plated banana plugs one end and 4-mm gold-plated banana plugs on other end (black/red, blue/yellow, green)
RFL Strap 1.5 ft (0.5 m) with alligator clips on ends
AC/DC Adapter 100-250 VAC (50/60 Hz) input, 12 VDC (1 A) output Power cord with IEC socket, US cord included
ENVIRONMENTAL SPECIFICATIONSOperating temperature 0° to 140°F (-18 to 60°C)
Storage temperature -40° to 165°F (-40 to 75°C)
Moisture: rain, water and humidity proof Meets or exceeds 1P65, 1P67
FEATURES BENEFITS3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
Communications Capability to work with a PC or handheld computer supporting software upload and data downloads
Flexible architecture Supports various data modem protocols such as ADSL2+
Graphical user interface User-friendly, icon-based display of test results
Help function An internal help and tutorial provides information as needed during operation
Backlight High resolution/high contrast black and white LCD display
Vehicle power adapter Plugs into standard vehicle accessory outlet
Windows/CE operating system Provides open architecture software environment
Keyboard Allows rapid access to twelve different “blue key” functions, reducing menu levels. Also has cursors, and supports alpha-numeric entry1
Yellow and green LED lights Signal battery state and communication status
Software TDR and auto-test knowledge based systems aids technicians during test interpretation
Bright big screen Highly visible even in bright sunlight due to proprietary 3M™ Vikuiti™ brightness enhancement technology, 80% larger than 965DSP
Modular design All you need is a new module to increase test capability (no need to replace test set)
Dynatel yellow Rugged, dependable
291
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
ELECTRICAL SPECIFICATIONS3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
FUNCTION RANGE RESOLUTION ACCURACY ±
Voltage (DC) 0 to 99.9 V 0.1 V 1% ± 0.5 V100 to 300 V 1 V 3%
Voltage (AC) 0 to 99.9 V 0.1 V 1% ± 0.5 V20 to 4 KHz 100 to 250 V 1 V 3%Meter resistance 100 K or 1 M
Current 0 to 59.9 mA 0.1 mA 1% ± 0.3 mA60 to 110 mA 0.1 mA 2%
Shunt resistance 430 Ω
Resistance 0 to 9999 Ω 1 Ω 1% ± 5 ΩWith CO voltage 0 to 9999 Ω 1 Ω 1% ± 50 Ω
10 k to 99.9 kΩ 0.1 kΩ 1%100 k to 999 kΩ 1 kΩ 3%1 M to 9.9 MΩ 10 kΩ 3%10 M to 99 MΩ 0.1 MΩ 5%
100 M to 990 MΩ 1 MΩ 10%
Opens (no noise) 0 to 3,000 ft (0 to 1,000 m) 1 ft (1 m) 1% ± 3 ft (1 m)3,000 to 10,000 ft (1 km to 3 km) 1 ft (1 m) 3%
10,000 to 50,000 ft (3 km to 15 km) 10 ft (10 m) 5%50,000 to 100,000 ft (15 km to 30 km) 100 ft (100 m) 10%
RFLFault range 0 to 20 MΩ — —Resistance to 0 to 99.99 Ω RTS 0.01 Ω 0.1% of RTS ± 0.01 ΩFault (no noise) 100 to 999.9 Ω RTS 0.1 Ω 0.2% of RTS ± 0.01 Ω
1 k to 3 kΩ RTS 1.0 Ω 1.0% of RTS ± 0.01 Ω
Wet section test Loop resistance 0 to 7 kΩ — —Resistive balance 0 to 3.5 kΩ — 5%
Loop resistance 0 to 99.9 Ω 0.01 Ω 0.1% ± 0.01 Ω100 to 999.9 Ω 0.1 Ω 0.2% ± 0.01 Ω1000 to 7000 Ω 1 Ω 1.0% ± 0.01 Ω
Resistance difference 0 to 99.99 Ω 0.01 Ω 1% of loop resistance ± 0.01 Ω
Tone outputID tone 200 to 1000 Hz, fixed level 8 volt peak to peak +1 Hz Precision tone- 600 Ω Zout 200 to 9999 Hz, -20 to +1 dBm 1 Hz, 0.1 dB 1% Hz, 0.2 dB
10 k to 19.99 kHz, -20 to +1 dBm 1 Hz, 0.1 dB 2% Hz, 1 dB
Ringers 0.0 to 4.0 ringer 0.1 ringer0 to 2000 nF 10 nF
Load coil count 0 to 5 1 ±1 load coil
Ground resistance 5 to 500 Ω 1 Ω 1% ± 1 Ω
Ohms/distance calculator 0-9999 Ω 0.01 —0-99999 ft (0-30 km) 1 ft (0.1 m) —
Note: 1All resistance to fault measurement accuracies have an added factor of (2x10-8) Rf ohms (Rf=fault resistance in ohms)
292 www.3MTelecommunications.com 800-426-8688
ELECTRICAL SPECIFICATIONS (CON’T FROM PREVIOUS PAGE)3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
FUNCTIONS RANGE RESOLUTION ACCURACY
TDR *Ranges 100 ft, 200 ft, 500 ft, 1,000 ft, 1 ft (1 m) 0.3% range
2,000 ft, 5,000 ft, 10,000 ft, 20,000 ft,30,000 ft (30 m, 60 m, 150 m, 300 m,
600 m, 1.5 km, 3km, 6 km, 10 km) 5 nS, 34 nS, 135 nS, Fixed values1600 nS, 600 nS
Velocity input 0.50 to 0.99 (150 to 299 m/µs) — —
Modes Single trace, dual trace, differential, — —memory, crosstalk, Peak, memory diff.
Loss (and frequency) -40 to +10 dBm, 200 to 3000 Hz, 0.1 dB, 1 Hz, ± 0.5 dB, 2 HzWith 600 Ω Zin -40 to +10 dBm, 3000 to 9995 Hz, 0.1 dB, 10 Hz ± 0.5 dB, 10 Hz
-40 to +10 dBm, 10 k to 19.9 kHz 1 dB, 10 Hz ± 1 dB, 20 Hz
Noise metallic 600 Ω Zin 0 to 50 dBrnc (-90 to –40 dBm0p) 1 dB ± 2 dBC and psophometric
Noise to ground 600 Ω Zin 40 to 100 dBrnc (-50 to 10 dBm0p) 1 dB ± 2 dB
Longitudinal balance 0 to 85 dB 1 dB ± 2 dB
Dial mode DTMF, Pulse Standard Standard
Caller ID (U.S. and Canada only) Date, time, number, name —Carrier level -4 to –32 dBm 1 dBm ± 2 dBm
Short range wideband specifications (without SA option)Wideband loss -50 to +2 dBm, 20 kHz to 1.2 MHz .1 dB, 100 Hz ± 2 dB, 1% Hz100, 135 Ω ZinWideband tone output–100,135 Ω Zout 0 dBm, 20 k to 2.2 MHz 1 kHz ± 1 dB at 2.2 MHz
SA wideband specificationsWideband loss -85 to +5 dBm, 20 kHz to 2.2 MHz .1 dB, 100 Hz ± 1 dB, 1%Hz100, 135 Ω Zin
Wideband noise metallic E filter 10-90 dBm 1 dB ± 2 dB100, 135 Ω Zin F filter 20-90 dBm 1 dB ± 2 dBE, F, G, and G2 filters G filter 30-90 dBm 1 dB ± 2 dB
Wideband spectral analysis 10 kHz to 2.2 MHz 0.5% of span 1%100, 135 Ω Zin – 90 dBm to +10 dBm 1dBDynamic RangeWideband tone output–100,135 Ω Zout 0 dBm, 20 k to 2.2 MHz 1 kHz ± 1 dB at 2.2 MHz
± 0.1% frequency ± 0.5 kHz
Impulse noise countingE, F, G, and G2 filters
Counting interval 1-60 minutes 1 minute ±5%
Threshold Lower limits: 30 dBrnC and E 1 dB ±1 dB (typical)40 dBrnF50 dBrnG
100 dBrn upper limitAll 30 dB higher for N to Ground
Count capacity 9999 1 —
293
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
GENERAL SPECIFICATIONSDrop test Survives 3 ft (1 m) drop onto concrete, using ASTM D4169 assurance
level I method 5276
Vibration Meets Mil 810F method 514.5
Water, dust and chemical proof Meets IP65 per IEC 529(1989) for rain and dustImmersion test IP67 0.15 m deep
Emissions Standards meet FCC part 15, class A: Digital Devices for the US, and EN55022 (radiated emissions)
Built to ISO9001/2000 certification for manufacturing facilities and TL9000 compliant
Built to ANSI/IPC A610-C manufacturing standards
Language English, Spanish, and French Canadian*
Units Feet or meters, Fahrenheit or Celsius, dBrnC or dBm0p, m/uS or Vf
Battery Rechargeable battery pack or alkaline, 9 hours typical use (50% on/off measures voltage)
Display 4.1" x 3.1"(104 x 79 mm), 320 x 240 pixel resolution, high visibility in bright sunlight due to 3M™ Vikuiti™ film technology
Stored results (All results) 100 results total of all types maximum
Note: Routine lab calibration is not recommended or required*Available late 2005
ELECTRICAL SPECIFICATIONS3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
FUNCTIONS RANGE
Filters: C and Psophometric 300 Hz – 3400 HzE filter 1 kHz – 50 kHzF filter 4.9 kHz – 245 kHzG filter 20 kHz – 1.1 MHz – 3 dB pointsG2 filter 20 kHz – 2.2 MHz
FEATURESMODEL NAME 965AMS 965AMS 965AMS 965AMS 965AMS BASIC 965AMS
BASIC TDR TDR+SA BASIC+ADSL2+ TDR+ADSL2+ SA+ADSL2+
FEATURES
Basic VOM and POTS • • • • • •
TDR • • • •
Short range wideband loss/tone • • • •
Wideband spectrum analysis + loss/tone • •
ADSL2+ modem • • •
294 www.3MTelecommunications.com 800-426-8688
FEATURES
3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
Interconnectivity All modules include
RS232 Communicates with a PC using a supplied cable
USB active synch client 1.1 Includes required USB cables
Battery charger port
Test lead connectors
Basic VOM All versions have these features
Voltage Detects and measures the presence of central office (exchange) or foreign DC or AC voltages, including ringer voltages
Current Measures DC loop current with a 430-ohm shunt
Resistance Measures conductor and insulation resistance up to 1GigaOhms
Soak test High voltage extended period resistance measurement that will expose corrosion-induced faults
Opens Locates opens at distances up to 100,000 ft. (30 km)
Resistive fault location Displays distance to fault
Special resistance Measures the loop resistance and the resistance differencebetween two conductors on a pair
Wet section test Allows RFL measurement when both wires in a pair are faulted and there is no separate good pair available
Ringers Measures and displays capacitance associated with one or more ringers and the equivalent count
Ground resistance Measures the resistance of the ground path
ID tone High power interrupted signal for tracing and identification
Kick test Rapid, fast combination of resistance, voltage and opens for quickly evaluating cable pairs
Voice band tests Noise, loss, tone, longitudinal balance, load coil counting and FED compatibility
Load coil count Indicates the presence of load coils in a loop circuit and distance to the first load coil
Loss Measures voiceband loss
Noise Measures noise metallic and noise to ground in dBrnC or dBm0p
Longitudinal balance Provides active measurement of line balance
Level trace Measures and displays the impedance of the un-terminated line as a function of frequency
Tone Provides test tones for conductor identification and transmission testing. 10 default tones, user selectable. Voiceband to 20 kHz, ID tones to 1000 Hz
Autotest Supports 3M Dynatel Far End Device FED II
Dialing Offhook, dialing capability, monitoring capability
Microphone and speaker capability Speaker has 1-watt power output for noisy environments
Caller ID functionality Displays number, name, date, and time just like the customers callbox
Wideband shortrange testing Wideband loss with limited range, wideband tone. This feature set is enabled in the basic and TDR units. Wideband loss measurements for short range orlow frequency
Test impendance 135 ohms only
Tone 20kHz to 1.2MHz at OdBm
295
Test, M
easure
ment a
nd
Facilitie
s L
ocatin
g —
Dia
gnostic
Testin
g E
quip
ment
OPTIONAL FEATURES3M™ DYNATEL™ ADVANCED MODULAR SYSTEM 965AMS
TDR Full-featured TDR with user-selectable pulse widths, length, gain zoom, filter and Vp. The TDR feature is enabled in the TDR and SA models
Single trace Provides graphical representation of events on a pair. Including expert system analysis of trace results
Dual trace Allows active comparison of two traces
Differential Displays difference between two circuits
Crosstalk Displays the crosstalk from one pair to another
Memory Allows comparison of an active trace with a trace stored in memory
Memory diff Difference between memory and live trace
Peak Displays a history of maximum and minimum values with the live trace
WideBand tests Wideband loss, wideband noise, wideband tone, spectrum analyzer this feature set is enabled in the SA models
WideBand Continuous sine wave insertion loss and noise measurements
Test impedances 100 and 135
Wideband loss Loss measurements to 2.2 MHz for pre-qualifying xDSL
Tone 20 kHz to 2.2 MHz at 0dBm
E, F, G, G2 filter Weighted noise and impulse noise counting
ORDERING INFORMATIONPRODUCT NUMBER STOCK NUMBER
965AMS-TDR/SA/ADSL2+/AC/DC/BON 80-6113-1614-4
965AMS-TDR/SA/ADSL2+/AC/DC/NN 80-6113-1660-7
KIT COMPONENTS965AMS BASIC
965AMS Basic 965AMS base unit storage bag, blue, yellow, green, red and black test leads. Conductor strap, NiMH battery pack (packed in unit), alkaline battery holder, wire gauge, self test circuit board and chain bead, 110/220V AC adapter, certificate of calibration, vehicle power adapter, instruction manual, warranty card, quick reference cards, USB cable and ethernet cable (with ASDL2 options).
For ordering information, please contact your local 3M representative.
296 www.3MTelecommunications.com 800-426-8688296