DVM E-Solution registration and user manual · DVM E-Solution registration and user manual . ......
Transcript of DVM E-Solution registration and user manual · DVM E-Solution registration and user manual . ......
DVM E-Solution registration and user manual
HTTP://DVME.BIMPEERS.COM/PUBLISH_ENG.HTM
Download & Install program from Link. http://dvme.bimpeers.com/publish_eng.htm
Launch program, you will see the information registration.
Fill in the information as follow.
HOW TO REGISTER? HOW TO BE AUTHORIZED?
Register your information by program.
It will take minimum a week, if your information is validated.
Authorization code will be sent to your program directly.
If your information is poor and insufficient, such as wrong information or impersonate a SAMSUNG employee. You will be rejected and you authorization will not be issued .
Beware of registering right
Term of agreement
• Select use language.
• Mark on “I read term of agreement &accept.”
• Tap “Agree”
Register : SAMSUNG employee
• Step 1. Select country.
• Step 2. Select company name with “SAMSUNG” in a list.
• Step 3. Select type of business with “SAMSUNG” in a list.
• Step 4. Select the one of profession in a list.
• Step 5. Fill in your “Single e-mail” address. If not, you request and authorization will not be issued.
• Step 6. Fill in rest of items.
Register : B2B Partner
• Step 1. Select country.
• Step 2. Select company name in a list. If you company name is not listed in there, select “input value”. You can type your company name directly.
• Step 3. Select type of business in a list
• Step 4. Select the one of profession in a list.
• Step 5. Fill in rest of items
After you have done,
• Step 1. You will see the message that “You already requested the authorization. Please wait until your authorization issued.”
• Step 2. Your information will be displayed as figure.
• Step 3. If your information are validate and input faithfully, administrator of DVM E-Solution will verify you whom are the interested parties or not with SAMSUNG.
• Step 4. Authorization code will be delivered automatically into your program within a week.
Why my authorization is not issue yet?
• Case : If your information is poor and insufficient, such as wrong information or impersonate a SAMSUNG employee.
• Result : You will be released and you authorization will not be issued . Also DVM E-Solution program will be locked. You will never use DVM . E-Solution anymore, even you
uninstall it.
• Step 3. Beware of registering right information.
Specification
Capacity
SEER/SCOP
Energy Simulation
PDM KIT
Report
Setting
About
Specification
• You can browse the product detail specification in a various line-up.
• We support DVM/FJM indoor/outdoor & CAC model.
• EHS, hydro unit, ERV, ERV Plus model is not supported yet.
Capacity_Table
• It provides the product capacity table in a range of DVM model.
• It only support for air cooled DVM outdoor unit (Not DVM S Water)
Capacity_Chart
• It provides the product capacity chart in a range of DVM model.
• It only support for air cooled DVM outdoor unit (Not DVM S Water)
`
Capacity_Graph
• It provides the product capacity graph in a range of DVM model.
• It only support for air cooled DVM outdoor unit (Not DVM S Water)
SEER/SCOP
• It provides SEER and SCOP value at various conditions.
• It only support for air cooled DVM outdoor unit.
• Condition of temperatures, weight factors can be manipulated manually.
• It will show graphical result as you see.
Energy simulation
• It provides annual energy simulation result based on real temperature data of specific city & country.
• If you have temperature data(365days & 24 hrs) in a specific city, HQ can store it and apply into our system.
• More detail information will be noticed.
• Select & add indoor units.
• Select outdoor unit.
Energy simulation
• Select & input all conditions.
• Proceed energy simulation with tapping “Result”.
• Your request will be sent to HQ DVM E-Solution server, then you will get the energy simulation result after 10 sec later normally.
Energy simulation
• Annual energy simulation result
• Based on cooling or heating usage by partial loads.
• It can be printed or saved in PDF the Energy simulation result.
PDM KIT
• Simulation of PDM KIT
installation before
• Calculation of pressure
loss along the length of the
outdoor unit pipe.
• Upsize piping diameter can
be selected.
• Verifying the installation of
PDM KIT.
• Installation guide provides.
PDM KIT_Install guide
• PDM KIT Installation guide
provides.
Report
• Provided in report form of
various results.
(Specification, Capacity,
SEER/SCOP).
• Specification form can be
selected.
•Required menu add/remove.
Report_Printing
• It can be saved in various
formats.
• You can print the report.
Setting
• Display settings capacity, air volume, length, spec form, temperature. • Country If you have multiple authorizations in countries, you can change the country. • Language English or korean • Format of spec - General style - US style - Middle east style - Korean style
About
• Check the version of
DVM E-Solution.
• Registered user
information.
Technical supports : [email protected]