Ditek DTK-4MB Data Sheet
2
DTK-MB Series wi th Snap Track Channel Quick-Install Mountin g Syst em for DTK-2MHLP and DTK-2MHTP One DITEK Center 1720 Starkey Road Largo, FL 33771 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com Doc. Number: SPS-100041-001 Rev 3 01/12 ©2011 DITEK Corp. Specification Subject to Change The DTK-MB Series, with Snap-Track, is the mounting base system for DTK-2MHLP surge modules. This mounting system allows the installer to protect multiple circuits terminating at the same point . Perfect for alarm panels, fire control systems, or other low voltage communications circuits. The DTK-MB makes for a quick and easy wire management solution. Features Available in arrays of 1, 2, 3, 4 or 5 Straight-in/straight- out terminal connections Single point ground for ease of installation Fast installation saves time Benefits Scalable up to 10 pairs of protection Protect multiple line voltages in one cabinet Up to 10 data, telco or other communication pairs protected with only one ground connection and only one backplane mount, simplifying installation. Ordering Guide Single unit: DTK-MB10 With surge module: DTK-2MHLPxxBWB (WB = With Base = DTK-MB10) Horizontal wiring across base: DTK-MBV Multiple bases: DTK-#MB - # indicates the array number of modular bases desired (2-5) Dimensions DTK- MBV (2 pair s): 3.25”H x 1. 50”W (82.5mm x 38. 1mm) DTK- MB10 (2 pairs) : 3.25”H x 1.50 ”W ( 82.5mm x 38.1 mm) DTK- 2MB (4 pairs) : 3.25”H x 3.00 ”W ( 82.5mm x 76. 2mm) DTK- 3MB (6 pairs) : 3.25”H x 4.50 ”W ( 82.5mm x 114. 3mm) DTK- 4MB (8 pairs) : 3.25”H x 6.00 ”W ( 82.5mm x 152. 4mm) DTK- 5MB (10 pairs): 3.25”H x 7.50”W (82.5mm x 190.5mm) DTK-5MB DTK-4MB DTK-3MB DTK-2MB DTK-MB10 DTK-MBV
-
Upload
jmac-supply -
Category
Documents
-
view
32 -
download
0
description
Buy the Ditek DTK-4MB at JMAC Supply.https://www.jmac.com/Ditek_DTK_4MB_p/ditek-dtk-4mb.htm?=scribd
Transcript of Ditek DTK-4MB Data Sheet
-
DTK-MB Series with Snap Track ChannelQuick-Install Mounting System for DTK-2MHLP and DTK-2MHTP
One DITEK Center1720 Starkey RoadLargo, FL 33771
1-800-753-2345 Direct: 727-812-5000Technical Support: 1-888-472-6100
www.ditekcorp.com
Doc. Number: SPS-100041-001 Rev 3 01/122011 DITEK Corp.
Specification Subject to Change
The DTK-MB Series, with Snap-Track, is the mounting base system for DTK-2MHLP surge modules. This mounting system allows the installer to protect multiple circuits terminating at the same point . Perfect for alarm panels, fire control systems, or other low voltage communications circuits. The DTK-MB makes for a quick and easy wire management solution.
FeaturesAvailable in arrays of 1, 2, 3, 4 or 5Straight-in/straight-out terminal connectionsSingle point ground for ease of installationFast installation saves timeBenefitsScalable up to 10 pairs of protectionProtect multiple line voltages in one cabinetUp to 10 data, telco or other communication pairs
protected with only one ground connection and only one backplane mount, simplifying installation.
Ordering GuideSingle unit: DTK-MB10 With surge module:
DTK-2MHLPxxBWB (WB = With Base = DTK-MB10)Horizontal wiring across base: DTK-MBVMultiple bases: DTK-#MB - # indicates the array number of
modular bases desired (2-5)
DimensionsDTK- MBV (2 pairs): 3.25H x 1.50W (82.5mm x 38.1mm)DTK- MB10 (2 pairs): 3.25H x 1.50W (82.5mm x 38.1mm)DTK- 2MB (4 pairs): 3.25H x 3.00W (82.5mm x 76.2mm)DTK- 3MB (6 pairs): 3.25H x 4.50W (82.5mm x 114.3mm)DTK- 4MB (8 pairs): 3.25H x 6.00W (82.5mm x 152.4mm)DTK- 5MB (10 pairs): 3.25H x 7.50W (82.5mm x 190.5mm)
DTK-5MB
DTK-4MB
DTK-3MB
DTK-2MB
DTK-MB10
DTK-MBV
Slide Number 1
