Dimensions - TYGSA · T1 T3 T4T2 % 37* 37 63 63 75 89 89 115 115 141101 **200,000 LBS. only with...
Transcript of Dimensions - TYGSA · T1 T3 T4T2 % 37* 37 63 63 75 89 89 115 115 141101 **200,000 LBS. only with...
GMK41002
Dimensions
11' 6" (3620)
30' 0" (8930)
20' 8" (8120)
19' 5" (5420) 12' 7"
(4070)
36' 5" (10 650)
28' 3" (9070)
38' 9" (11 570)
31' 6" (10 150)
27' 5" (8350)
10' (3050)
9' (2750)
15' 8" (4770)
23' 7" (7200)
9' (2750)
27' 5" (8350)
18' 4" (5600)
17' 5" (5300)
20° 21°
12' 5" +6-1/2"
-5" (3778)
4' 8" (1413)
7' 2" (2190)
5' 9" (1750)
4' 1" (1250)
5' 5" (1650)
35' 4" (10 775)
7' 10-1/2" (2400)
27' 5" (8350)
5' 5" (1650)
4' 7" (1400)
5' 11" (1807)
5' 1" (1540)
6' 10" (2080)
42' 8" (13 010)
8-11/16" (220)
6" (150)
36' 9" (11 200)
12' 5" (3782)
43' 3" (13 185)
ADDITIONS:
MODEL GMK 4100 EQUIPPED WITH:8 x 6 x 8, Tires 20.5R25, 9,260 lbs. (4200 kg)counterweight
FRONT2 AXLE LINES
51,920 lbs.
GVW
102,835 lbs.
REAR2 AXLE LINES
50,915 lbs.
Outrigger Floats
Auxiliary Hoist
16.00R25 Tires in lieu of 20.5R25
14.00R25 Tires in lieu of 20.5R25
Spare Tire & Wheel - 14.00R25 & Bracket
Spare Tire & Wheel - 16.00R25 & Bracket
Spare Tire & Wheel - 20.5R25 & Bracket
26' - 43' Lattice Extension w/Brackets
8 x 8 Drive
159 lbs.-2,147 lbs.
-370 lbs.
-900 lbs.
-416 lbs.
-516 lbs.
-589 lbs.
3,382 lbs.
212 lbs.
1,398 lbs.
-1,067 lbs.
824 lbs.
1,232 lbs.
1,000 lbs.
-900 lbs.
-370 lbs.
4,837 lbs
172 lbs.
809 lbs.
2,315 lbs.
1,036 lbs.
716 lbs.
584 lbs.
-1,800 lbs.
-740 lbs.
2,690 lbs.331 lbs.
REMOVAL:9,260 lbs. Counterweight
2 X Front Outriggers (Beams & Jacks)
2 X Rear Outriggers (Beams & Jacks)
Weights may vary due to manufacturing tolerances and scale accuracy.
5,315 lbs.
-4,167 lbs.
1,940 lbs.
-14,575 lbs.
1,411 lbs.
-5,467 lbs.
-9,260 lbs.
-2,756 lbs.
-3,527 lbs.
Note: ( ) Reference dimensions in mm
Note: With addition of auxiliary hoist, tailswing increases to 14’ 2” (4320 mm)
GMK4100
1020304050607080901001101201301401501600
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240 0°30°
16°
141' + 62'
37'
62'
90'
115'
141'
141' + 26'
141' + 43'
FEET
AXIS OF ROTATION
FEET
141' + 82'
70°
60°
50°
40°
30°
20°
10°
0°
9'-7"7'-0" 9'-7"DIMENSIONS ARE FOR LARGEST GROVE FURNISHED HOOK BLOCK AND HEADACHE BALL, WITH ANTI-TWO BLOCK ACTIVATED.
37 -141 ft. (11.2 - 43.0 m)
360°26 - 43 - 62 - 82 ft. (8.0 - 13.0 - 19.0 - 25.0 m)
34,850 lbs. (15 800 kg)
3
Working range
GMK4100
Superstructure specifications
4
Boom
37 ft. to 141 ft. (11.2 m to 43 m) five-section full powerboom.Maximum tip height: 150 ft. (46 m).
Lattice ExtensionTwo-stage, 26 ft. to 43 ft. (8 m to 13 m) lattice extensionoffsettable at 0°, 16° and 30°. Stows alongside baseboom section.Maximum tip height: 194 ft. (59 m).
*Optional Lattice ExtensionBoom extension, lattice design 26, 43, 62, 82 ft. (8, 13,19, 25 m) - includes 26 ft. to 43 ft. (8 m to 13 m) swing-away (offsets 0°, 16° and 30°) plus 20 ft. (6 m) latticeextensions.Maximum tip height: 230 ft. (70 m).
Boom ElevationSingle cylinder with integral holding valve provides elevation from -3° to 84°.
Load Moment & Anti-Two Block SystemLoad moment and anti-two block system withaudio-visual warning and control lever lock-out.These systems provide electronic display of boomangle, length, radius, tip height, relative load moment,maximum permissible load, load indication andwarning of impending two-block condition.
CabFull vision aluminum cab, safety glass windows,adjustable operator’s seat with hydraulic suspension,engine-independent heating, instrumentation andoperating controls for superstructure.
SwingAxial piston motor with planetary gear. Holding and service brake. Swing speed variable from 0 - 1.9 RPM.
Counterweight34,850 lbs. (15 800 kg) total. Hydraulically installed andremoved.
EngineMercedes-Benz OM366A, diesel, 6 cylinders, watercooled, turbocharged, 104 kW at 1800 RPM.Maximum torque: 566 Nm at 1500-1600 RPM.
Hydraulic SystemThree separate pump circuits: two axial piston pumpswith integrated infinitely variable speed and loadcontrol and two fixed displacement pumps for swing.
349 gallon (1320 L) reservoir capacity.
All crane movements infinitely variable by hydraulicpilot circuit control levers with automatic reset to zero.
Electrical System24 V lighting system and signals.Generator: 28 V/55 A.Two batteries: 12 V/170 Ah each.
HOIST SPECIFICATIONSMain HoistAxial piston fixed displacement motor withintegrated planetary gear and multiple disk brake.Rope drum with special grooving.
Single line pull: 13,700 lbs.(61 kN)
Single line speed: 400 FPM(120 m/min)
Rope diameter: 19 mm
Rope length: 788 ft.(240 m)
Auxiliary HoistAxial piston variable displacement motor withintegrated planetary gear and multiple disk brake.Rope drum with special grooving.
Single line pull: 13,700 lbs.(61 kN)
Single line speed: 400 FPM(120 m/min)
Rope diameter: 19 mm
Rope length: 590 ft.(180 m)
Carrier specifications
5GMK4100
ChassisFour-axle, all-welded, torsion-resistant, box-typeconstruction of high strength steel.
OutriggersFour hydraulically telescoping beam outriggers withvertical cylinders and outrigger pads. Independenthorizontal and vertical movement control on eachside of chassis. Crane level indicators at eachcontrol station.
EngineDaimler Benz OM 442 A diesel, 8 cylinders,water-cooled with turbocharger, 335 hp (250 kW) @2100 RPM.Maximum torque: 1500 Nm at 1200 RPM.
Fuel Tank Capacity127 gallons (500 L).
TransmissionAutomatic powershift transmission with 5 forwardand 1 reverse gears.Two speed transfer case withlongitudinal differential lock.
Drive8 x 6 x 8
Axles1st axle line - drive/steer.2nd axle line - drive/steer.3rd axle line - steer (off road only).4th axle line - drive/steer.
Drive axles with planetary hub reduction and centermounted gearing.
SuspensionExclusive "MEGATRAK™" independenthydropneumatic suspension and hydraulic axlelock-out. Dual level control. Suspension range: +6.7in. (170 mm) to -5.0 in. (-130 mm). Possiblecombination for transverse slope.
Tires8 - 20.5R25 radials.
SteeringDual-circuit. Automatic switch-in of standby steeringpump in case of main pump failure.
BrakesService brake: pneumatic dual circuit acting on allwheels. Air dryer.Auxiliary brake: hydraulic retarder integrated withautomatic transmission.
Parking brake: pneumatically operated spring-loadedbrake acting on 2nd and 4th axle line.
CabAluminum, two-man design, safety glass, driver's seatwith hydraulic suspension, engine hot water heater.Complete instrumentation and driving controls. Cabcan be tilted forward by 60° for easy access toengine, transmission, hydraulic pumps, heater andbatteries.
Electrical System24 V lighting system and signals.Generator: 28 V/55 A.Two batteries: 12 V/170 Ah each.
Maximum Speed47 mph (75 kph)
Gradeability (Theoretical)60%
Miscellaneous Standard EquipmentHydraulic oil cooler; spare tire and wheel - 20.5R25with carry bracket; spare parts/service manuals; hoistdrum rotation indicators; f lashing amber warninglight on carrier cab; working light; tool kit, wheelchocks, fire extinguisher; rooster sheave; radio/cassette in carrier cab.
*Optional Equipment* 8 x 8 x 8 drive* Hook blocks and headache balls* Motor-independent heating with engine preheater.
*Denotes optional equipment.
6
37 - 141 ft. (11.2 - 43 m)
34,850 lbs. (15 800 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
37* 37 63 63 75 89 89 115 115 141101
**200,000 LBS. only with special equipment
128
All main boom charts available with 50% outriggers.
GMK4100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
7GMK4100
37 - 141 ft. (11.2 - 43 m)
22,000 lbs. (10 000 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
37* 37 63 63 75 89 89 115 115 141101 128
All main boom charts available with 50% outriggers.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
8 GMK4100THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
37 - 141 ft. (11.2 - 43 m)
9,300 lbs. (4200 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
37 63 63 75 89 89 115 115 141101 128
All main boom charts available with 50% outriggers.
37 - 141 ft. (11.2 - 43 m)
0 lbs. (0 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
37 63 63 75 89 89 115 115 141101 128
All main boom charts available with 50% outriggers.
9GMK4100
141 ft. (43 m)
34,850 lbs. (15 800 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
0° 16° 30° 0° 16° 30° 0° 16° 30°
26 FEET 43 FEET 63 FEET
26 - 43 - 62 - 82 ft. (8 - 13 - 19 - 25 m)
0° 16° 30°
82 FEET
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
10
141 ft. (43 m)
22,000 lbs. (10 000 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
0° 16° 30° 0° 16° 30° 0° 16° 30°
26 FEET 43 FEET 63 FEET
26 - 43 - 62 - 82 ft. (8 - 13 - 19 - 25 m)
0° 16° 30°
82 FEET
GMK4100THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
11GMK4100
141 ft. (43 m)
9,000 lbs. (4200 kg)
360°
Pounds
100%
(Feet)
T2T1 T3 T4 %
0° 16° 30° 0° 16° 30°
26 FEET 43 FEET
26 - 43 ft. (8 - 13 m)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
82' Boom Extension
12 GMK4100
Length (ft.)
BI-FOLD SWINGAWAY
BASE SECTION TIP SECTION
26'
43'
62'
20'(6 m)
_______
_______
1 X
4'(1.4 m)
1 X
1 X
1 X
22'(6.6 m)
1 X
1 X
1 X
17'(5 m)
_______
1 X
1 X
82' 2 X 1 X 1 X 1 X
Rated lifting capacities
Impor tant Notes:
War ning: THIS CHART IS ONLY A GUIDE.The notes below ar e for illustration only andshould not be r elied upon to operate the crane.The individual crane's load char t, operatinginstructions and other instruction plates must ber ead and understood pr ior to operating the crane.
1. All rated loads have been tested to and meetminimum requirements of SAEJ1063 NOV93 -Cantilevered Boom Crane Structures - Method of Test,and do not exceed 85% of the tipping load onoutriggers as determined by SAEJ765 OCT90 CraneStability Test Code.
2. Capacities given do not include the weight of hookblocks, slings, auxiliary lifting equipment and loadhandling devices.Their weights must be added to theload to be lifted.When more than minimum requiredreeving is used, the additional rope weight shall beconsidered part of the load.
3.Tipping should never be relied upon as a capacitylimitation.
4. All capacities are for crane on firm, level surface. Itmay be necessary to have structural supports under theoutrigger f loats or tires to spread the load to a largerbearing surface.
5.When either boom length or radius or both arebetween values listed, the smallest load shown at eitherthe next larger radius or boom length shall be used.
6. For outrigger operation,ALL outriggers shall beproperly extended with tires raised free of groundbefore raising the boom or lifting loads.
AP308Fixed10ft.Boomextension
AP308Tele.Boomextension
GMK4100
Distributed By:
Constant improvement and engineering progress make it necessary that we reserve the right to makespecification, equipment, and price changes without notice. Illustrations shown may include optionalequipment and accessories and may not include all standard equipment.
Form No.: SBGMK4100 Part No.: 3-961 797-12M Printed in U.S.A.
Grove Worldwide – World HeadquartersGrove North America1565 Buchanan Trail East P.O. Box 21 Shady Grove, Pennsylvania 17256, U.S.A.Tel: [ Int + 1] (717) 597-8121Fax: [ Int + 1] (717) 597-4062Western Hemisphere, Asia/Pacific
Grove Europe Limited* Sunderland SR4 6TT, England Tel: [ Int + 44] 191 565-6281Fax: [ Int + 44] 191 564-0442Europe, Africa, Middle East
Grove Europe Limited*P.O. Box No. 2684A Kimber RoadAbingdon, Oxfordshire, 0X141SGTel: [ Int + 44] 1235 55-3184Fax: [ Int + 44] 1235 55-3218*Grove Europe Limited, Registered in England,Number 1845128, Registered office, Crown Works,Pallion, Sunderland, Tyne & Wear, England SR4 6TT
Deutsche Grove GmbHSales and Service Helmholtzstrasse 12, Postfach 5026D-40750 Langenfeld, GermanyTel: [ Int + 49] (2173) 8909-0Fax: [ Int + 49] (2173) 8909-30
Wilhelmshaven WorksIndustriegelande West, Postfach 1853D-26358 Wilhelmshaven, Germany Tel: [ Int + 49] (4421) 294-0Fax: [ Int + 49] (4421) 294-301
Grove France S.A. 16, chaussée Jules-César, 95520 OSNYB.P. 203, 95523 CERGY PONTOISE CEDEXFranceTel: [ Int + 33] (1) 30313150Int: [ Int + 33] (1) 30386085
Grove Asia/Pacific - Regional Office 171 Chin Swee Road#06-01 San Centre Singapore 0316Tel: [ Int + 65] 536-6112 Fax: [ Int + 65] 536-6119 Asia/Pacific, Near East
Grove China - Representative OfficeBeijing Hotel Room 6074No. 33 East Chang An Avenue Beijing, 100004, China Tel: [ Int + 86] (10) 513-7766Fax: [ Int + 86] (10) 513-7307
Grove Product Support Western Hemisphere, Asia/Pacific1086 Wayne AvenueChambersburg, Pennsylvania USATel: [ Int + 1] (717) 263-5100Fax: [ Int + 1] (717) 267-0404
Europe, Africa, Middle EastSunderland SR4 6TT, EnglandTel: [ Int + 44] 191 565-6281Parts Fax: [ Int + 44] 191 510-9242Service Fax: [ Int + 44] 191 510-9560
http://www.groveworldwide.com