DESIGN GUIDE OVENS - Sub-Zero
Transcript of DESIGN GUIDE OVENS - Sub-Zero
ICB REVISED 5/ 2019
D E S I G N G U I D E O V E N S
TA B L E O F C O N T E N T S
3
1 5
2 7
M S E R I E S B U I L T- I N O V E N S
E S E R I E S B U I L T - I N O V E N S
C O N V E C T I O N S T E A M O V E N S
M I C R O W A V E O V E N S
W A R M I N G D R A W E R S
Features and specifications are subject to change at any time without notice.
Throughout this guide, dimensions may vary by ± 3 mm.
3 2
3 8
subzero-wolf.com.au | 3
M Series Built-In Ovens
Four striking looks are just the beginning. Superior perfor-mance features include our advanced Dual VertiCross™ convection fan system, touch-screen controls, convenient preset cooking programs and improved interior lighting. There is more usable space inside for deliciousness on a grand scale. M series ovens can be installed in a standard or flush inset application.
M SERIES OVENS
UPPER OVEN LOWER OVEN
M SERIES OVENS
TRANSITIONAL
ICBSO30PM/S/PH
ICBSO30TM/S/TH
ICBDO30PM/S/PH
ICBDO30TM/S/TH
PROFESSIONAL
ICBSO30CM/B
ICBDO30CM/B
CONTEMPORARY
ICBSO30CM/S
ICBDO30CM/S
BU
ILT
-IN
OV
EN
S
4 | English
M SERIES OVENS
M Series Built-In Ovens
TRANSITIONAL SINGLE OVEN
TRANSITIONAL DOUBLE OVEN
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
65mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
65mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 5
M SERIES OVENS
M Series Built-In Ovens
PROFESSIONAL SINGLE OVEN
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
83mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
759 mm
46 mm
543mm
83mm
22mm
36 mmCONDUITCHANNEL
218mm
51 mmUPPER OVEN LOWER OVEN
PROFESSIONAL DOUBLE OVEN
BU
ILT
-IN
OV
EN
S
6 | English
M SERIES OVENS
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51mm
759 mm
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
46 mm
543mm
22mm
36 mmCONDUITCHANNEL
218mm
51mm
759 mm
M Series Built-In Ovens
CONTEMPORARY SINGLE OVEN—STAINLESS STEEL
CONTEMPORARY DOUBLE OVEN—STAINLESS STEEL
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 7
M SERIES OVENS
OPEN OVEN DOOR
584 mmBEHIND FRAME
1291mm
1254mm
46 mm
543mm
25mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
OPEN OVEN DOOR584 mm
BEHIND FRAME
723mm
686mm
46 mm
543mm
25mm
36 mmCONDUITCHANNEL
218mm
51 mm
759 mm
M Series Built-In Ovens
CONTEMPORARY SINGLE OVEN—BLACK GLASS
CONTEMPORARY DOUBLE OVEN—BLACK GLASS
BU
ILT
-IN
OV
EN
S
8 | English
M SERIES OVENS
Planning Information
The M series oven can be installed in a standard or flush inset application. If a cooktop is being installed above an oven, a minimum of 6 mm is required between units. Loca-tion of the electrical supply within the oven opening may require additional cabinet depth.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Single Oven 115 kgDouble Oven 181 kg
TRIM OVERLAP
Top 25 mmBottom 0 mmSides 18 mm
DUAL INSTALLATION
Two 76 cm single M series ovens can be installed side by side in a standard or flush inset application. A dual instal-lation kit is required. To maintain appropriate airflow, the ovens must be installed into one opening. Any cosmetic or structural material placed between the ovens will impede airflow and is not recommended. Refer to illustrations on the following pages.
The dual installation kit is available through an authorized Wolf dealer.
ELECTRICAL
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply flush with the back wall and within the shaded area shown in the illustration for your spe-cific installation on the following pages. For ease of instal-lation, the electrical supply for the oven can be placed in an adjacent cabinet within reach of the conduit.
Performance may be compromised if the electrical supply is less than 220 volts.
The oven is supplied with a single phase and 3-phase convertible power inlet box. The wiring diagram covering the control circuit is provided with the oven.
ELECTRICAL REQUIREMENTS
SINGLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC50/60 Hz
380-415 V AC50 Hz
Maximum Connected Load 4.2–4.8 kW 3.0–3.6 kW
DOUBLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC50/60 Hz
380-415 V AC50 Hz
Maximum Connected Load 8.4–9.6 kW 4.2–4.8 kW
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 9
M SERIES OVENS
M Series Single Oven
STANDARD INSTALLATION
E127mm
E
E
102mm
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
591 mmOPENING
DEPTH
TOP VIEW
699 mmOPENINGHEIGHT
WOPENING WIDTH
OPENING WIDTH W
76 cm Model 724 mm
BU
ILT
-IN
OV
EN
S
10 | English
M SERIES OVENS
M Series Double Oven
STANDARD INSTALLATION
E127mm
102mm
E
E
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
1267 mmOPENINGHEIGHT
591 mmOPENING
DEPTH
WOPENING WIDTH
432 mmTYPICAL
TOP VIEW
OPENING WIDTH W
76 cm Model 724 mm
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 11
M SERIES OVENS
M Series Single Oven
FLUSH INSET INSTALLATION
E127mm
102mm
FRONT VIEWSIDE VIEW
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
729 mmFLUSH INSET
HEIGHT***
28 mm
3 mm
21 mm
610 mmFLUSH INSET
DEPTH
22 mmOR
25 mm**FINISHEDCLEATS*
WFLUSH INSET WIDTH***
TOP VIEW
E
E
FLUSH INSET WIDTH W
76 cm Model 765 mm
BU
ILT
-IN
OV
EN
S
12 | English
M Series Double Oven
FLUSH INSET INSTALLATION
E127mm
102mm
FRONT VIEWSIDE VIEW
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
1297 mmFLUSH INSET
HEIGHT***
28 mm
3 mm
21 mm
610 mmFLUSH INSET
DEPTH
22 mmOR
25 mm**FINISHEDCLEATS*
WFLUSH INSET WIDTH***
432 mmTYPICAL
TOP VIEW
E
E
FLUSH INSET WIDTH W
76 cm Model 765 mm
M SERIES OVENS
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 13
M SERIES OVENS
BU
ILT
-IN
OV
EN
S
E127mm
102mm
E127mm
102mm
E E
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.
TOP VIEW
591 mmOPENING
DEPTH
699 mmOPENINGHEIGHT W
OPENING WIDTH
M Series Single Oven
DUAL STANDARD INSTALLATION
DUAL OPENING WIDTH W
Two 76 cm Models 1486 mm
14 | English
M SERIES OVENS
BU
ILT
-IN
OV
EN
S
E127mm
102mm
E127mm
102mm
FRONT VIEWSIDE VIEW
TOP VIEW
EE
FINISHEDCLEATS*
*25 mm minimum depth. Shaded areas will be visible and should be finished to match cabinetry.**22 mm for transitional, professional and contemporary stainless steel models and 25 mm for contemporary black glass model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth. A dual installation kit is required for this installation.
729 mmFLUSH INSET
HEIGHT***
28 mm
3 mm
21 mm
610 mmFLUSH INSET
DEPTH
22 mmOR
25 mm**
WFLUSH INSET WIDTH***
M Series Single Oven
DUAL FLUSH INSET INSTALLATION
DUAL FLUSH INSET WIDTH W
Two 76 cm Models 1527 mm
subzero-wolf.com.au| 15
E Series Built-In Ovens
Stainless models feature a redesigned stainless steel touch-action control panel, helping to create great meals with ease, as well as adding a striking design feature to the kitchen. Smart technology gives the E series ten cooking modes, with Wolf’s innovative dual convection in single ovens and in the upper unit of double ovens. Wolf E series ovens are crafted of stainless steel. Tubular handles have been updated to match the rest of the new Wolf cooking appliance offering, providing a more cohesive look. E series ovens can be installed in a standard or flush inset application.
ICBSO30CE/B/TH
ICBSO30TE/S/TH
ICBDO30TE/S/TH
ICBDO30CE/B/TH
ICBSO30PE/S/PH
ICBDO30PE/S/PH
E SERIES OVENS
E SERIES OVENS
TRANSITIONAL
PROFESSIONAL
CONTEMPORARY
WARM LIGHT TEMP MODE TIMER TIME OFFOK
ICBSO24TE/S/TH
BU
ILT
-IN
OV
EN
S
16 | English
E SERIES OVENS
60 cm E Series Ovens
ICBSO24TE/S/TH
OPEN OVEN DOOR
546 mmBEHIND FRAME
597mm
591mm
64mm
559 mm
460mm
22 mm
597 mm
WARM LIGHT TEMP MODE TIMER TIME OFFOK
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 17
E SERIES OVENS
76 cm E Series Ovens
TRANSITIONAL SINGLE OVEN
603 mmBEHIND FRAME
708mm
759 mm
CONDUITCHANNEL 689
mm
70mm
76 mm
718 mm
559mm
244mm
225mm
25 mm
OPEN OVEN DOOR
OPEN OVEN DOOR
603 mmBEHIND FRAME
1280mm
1261mm
759 mm 70mm
CONDUITCHANNEL
718 mm
559mm
244mm
225mm
76 mm
25 mm
TRANSITIONAL DOUBLE OVEN
BU
ILT
-IN
OV
EN
S
18 | English
E SERIES OVENS
76 cm E Series Ovens
PROFESSIONAL SINGLE OVEN
603 mmBEHIND FRAME
708mm
759 mm
CONDUITCHANNEL 689
mm
86mm
76 mm
718 mm
559mm
244mm
225mm
25 mm
OPEN OVEN DOOR
OPEN OVEN DOOR
603 mmBEHIND FRAME
1280mm
1261mm
759 mm
CONDUITCHANNEL
718 mm
559mm
244mm
225mm
76 mm
25 mm
86mm
PROFESSIONAL DOUBLE OVEN
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 19
E SERIES OVENS
OPEN OVEN DOOR
603 mmBEHIND FRAME
1280mm
1257mm
759 mm 76mm
32 mm
CONDUITCHANNEL
76 mm
718 mm
559mm
244mm
225mm
OPEN OVEN DOOR
603 mmBEHIND FRAME
708mm
759 mm
32 mm
687mm
76mm
CONDUITCHANNEL
76 mm
718 mm
559mm
244mm
225mm
76 cm E Series Ovens
CONTEMPORARY SINGLE OVEN
CONTEMPORARY DOUBLE OVEN
BU
ILT
-IN
OV
EN
S
20 | English
BASE SUPPORT MIN
60 cm Single Oven 68 kg76 cm Single Oven 115 kg76 cm Double Oven 181 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 6 mm 13 mmBottom 0 mm 3 mmSides 17 mm 17 mm
ELECTRICAL
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply flush with the back wall and within the shaded area shown in the illustration for your specific installation on the following pages. For ease of installation, the electrical supply for the oven can be placed in an adjacent cabinet within reach of the conduit. The 76 cm units are supplied with terminal box convertible to single or 3-phase.
The wiring diagram covering the control circuit is provided with the oven.
ELECTRICAL REQUIREMENTS
60 cm SINGLE OVEN
Electrical Supply 220-240 V AC, 50 HzService 3400 WReceptacle grounding-type (earthed)Power Cord 1.8 m
ELECTRICAL REQUIREMENTS
76 cm SINGLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC50/60 Hz
380-415 V AC50 Hz
Max Connected Load 4.4 kW 4.4 kWTotal Amps 19 19
76 cm DOUBLE OVEN SINGLE PHASE 3-PHASE
Required Power Supply 220-240 V AC50/60 Hz
380-415 V AC50 Hz
Max Connected Load 7.4 kW 5.1 kWTotal Amps 32 22
E SERIES OVENS
Planning Information
The E series oven can be installed in a standard or flush inset application. If a cooktop is being installed above an oven, a minimum of 6 mm is required between units. Loca-tion of the electrical supply within the oven opening may require additional cabinet depth.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 21
E SERIES OVENS
60 cm E Series Oven
STANDARD INSTALLATION
FRONT VIEWSIDE VIEW
NOTE: Electrical supply must be located in adjacent cabinet within .9 m of opening.
HOPENINGHEIGHT
572 mmOPENING
DEPTH
TOP VIEW
562 mmOPENING WIDTH
EE
OPENING HEIGHT H
Model ICBSO24TE/S/TH 591 mm
BU
ILT
-IN
OV
EN
S
22 | English
E SERIES OVENS
76 cm E Series Single Oven
STANDARD INSTALLATION
E127mm
E
E
102mm
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.
610 mmOPENING
DEPTH
TOP VIEW
692 mmOPENINGHEIGHT
724 mmOPENING WIDTH
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 23
E127mm
102mm
E
E
FRONT VIEWSIDE VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.
1264 mmOPENINGHEIGHT
610 mmOPENING
DEPTH
724 mmOPENING WIDTH
432 mmTYPICAL
TOP VIEW
76 cm E Series Double Oven
STANDARD INSTALLATION
E SERIES OVENS
BU
ILT
-IN
OV
EN
S
24 | English
603 mmFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
584 mmFLUSHINSETDEPTH22 mm
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.
NOTE: Electrical supply must be located in adjacent cabinet within .9 m of opening.
H FLUSH INSET
HEIGHT**
10 mm
6 mm
TOP VIEW
EE
24 mm
FINISHEDCLEATS*
60 cm E Series Oven
FLUSH INSET INSTALLATION
E SERIES OVENS
FLUSH INSET HEIGHT H
Model ICBSO24TE/S/TH 603 mm
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 25
E SERIES OVENS
E127mm
102mm
FRONT VIEWSIDE VIEW
*Will be visible and should be finished to match cabinetry.**25 mm for professional and transitional models and 32 mm for contemporary model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.
714 mmFLUSH INSET
HEIGHT***
19 mm
6 mm
20 mm
635 mmFLUSH INSET
DEPTHFINISHEDCLEATS*
765 mmFLUSH INSET WIDTH***
25 mmOR
32 mm**
TOP VIEW
981 mmTYPICAL
E
E
76 cm E Series Single Oven
FLUSH INSET INSTALLATION
BU
ILT
-IN
OV
EN
S
26 | English
76 cm E Series Double Oven
FLUSH INSET INSTALLATION
E127mm
102mm
E
E
FRONT VIEWSIDE VIEW
*Will be visible and should be finished to match cabinetry.**25 mm for professional and transitional models and 32 mm for contemporary model.***Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.Dashed line represents profile of unit.
1289 mmFLUSH INSET
HEIGHT***
432 mmTYPICAL
19 mm
6 mm
20mm
765 mmFLUSH INSET WIDTH***
635 mmFLUSH INSET
DEPTHFINISHEDCLEATS*
25 mmOR
32 mm**
TOP VIEW
E SERIES OVENS
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 27
CONVECTION STEAM OVENS
Convection Steam Ovens
The legacy of the “combination oven” goes back decades, to innovative chefs in America and Europe who embraced the combination of air movement with superheated steam to achieve superior results—from breads and roasts to delicate fishes, seafood and vegetables. Wolf combines the benefits of convection and steam for the most innovative steam oven on the market today. Virtually any dish prepared in a con-ventional oven, range or microwave can also be prepared in the Wolf convection steam oven—with more control. Two widths and three distinct styles compliment the look of Wolf ovens, ranges and cooktops. Convection steam ovens can be installed in a standard or flush inset application.
BU
ILT
-IN
OV
EN
S
CONVECTION STEAM OVENS
TRANSITIONAL
ICBCSO30TE/S/THICBCSO30TM/S/TH
PROFESSIONAL
CONTEMPORARY
ICBCSO30PE/S/PHICBCSO30PM/S/PH
ICBCSO30CM/B/TH
ICBCSO24TE/S/TH
ICBCSO30CMBICBCSO30CMS
28 | English
CONVECTION STEAM OVENS
BU
ILT
-IN
OV
EN
S
OPEN OVEN DOOR
454mm
446mm
64mm
538 mm
360mm
22 mm
546 mmBEHIND FRAME
WWIDTH
Convection Steam Ovens
TRANSITIONAL
PROFESSIONAL
OPEN OVEN DOOR
454mm
446mm
83mm
538 mm
360mm
22 mm
759 mm 546 mmBEHIND FRAME
CONTEMPORARY
454mm
446mm
64mm
22 mm
759 mm
OPEN OVEN DOOR
538 mm
360mm
546 mmBEHIND FRAME
WIDTH W
60 cm Transitional 597 mm
76 cm Transitional 759 mm
subzero-wolf.com.au | 29
CONVECTION STEAM OVENS
ELECTRICAL
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Performance may be compromised if the electrical supply is less than 220 volts.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50 Hz
Service 3800 W
Receptacle grounding-type (earthed)
Power Cord 1.8 m
Planning Information
The convection steam oven can be installed in a standard or flush inset application. The electrical supply for the oven must be located in an adjacent cabinet.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Convection Steam Oven 45 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm
BU
ILT
-IN
OV
EN
S
30 | English
Convection Steam Oven
STANDARD INSTALLATION
FRONT VIEWSIDE VIEW
NOTE: Both 60 cm and 76 cm models require the same opening dimensions.Electrical supply must be located in adjacent cabinet within .9 m of opening.Dashed line represents profile of unit.
448 mmOPENINGHEIGHT
548 mmOPENING
DEPTH
TOP VIEW
WOPENING WIDTH
EE
CONVECTION STEAM OVENS
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 31
Convection Steam Oven
FLUSH INSET INSTALLATION
WFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
FINISHEDCLEATS*
584 mmFLUSH INSET
DEPTH25 mm
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.
NOTE: Electrical supply must be located in adjacent cabinet within .9 m of opening.Dashed line represents profile of unit.
460 mm FLUSH INSET
HEIGHT**
8 mm
3 mm
TOP VIEW
EE
A
CONVECTION STEAM OVENS
FLUSH INSET WIDTH W A
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
BU
ILT
-IN
OV
EN
S
32 | English
MICROWAVE OVENS
Microwave Ovens
As true cooking instruments, Wolf microwave ovens have features that make fast meals better meals. New drop down door microwaves feature a door that hinges at the bottom. Drop down door microwaves are designed to match Wolf transitional, professional and contemporary products. Microwave ovens can be installed in a standard or flush inset application.
DROP DOWN DOOR MICROWAVES
TRANSITIONAL
ICBMDD30TE/S/THICBMDD30TM/S/TH
PROFESSIONAL
CONTEMPORARY
ICBMDD30PE/S/PHICBMDD30PM/S/PH
ICBMDD30CM/B/TH
ICBMDD24TE/S/TH
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 33
MICROWAVE OVENS
546 mmBEHIND FRAME
OPEN OVEN DOOR
454mm
64mm
360mm
22 mm 538 mm
446mm
WWIDTH
WIDTH W
60 cm Model 597 mm
76 cm Model 759 mm
Drop Down Door Microwave Ovens
TRANSITIONAL
PROFESSIONAL
OPEN OVEN DOOR
454mm
446mm
83mm
538 mm
360mm
22 mm
759 mm 546 mmBEHIND FRAME
CONTEMPORARY
546 mmBEHIND FRAME
OPEN OVEN DOOR
454mm
64mm
360mm
22 mm 538 mm
446mm
759 mm
BU
ILT
-IN
OV
EN
S
34 | English
MICROWAVE OVENS
Planning Information
DROP DOWN DOOR MICROWAVE
The drop down door microwave oven can be installed in a standard or flush inset application.
Finish the edges of the opening. They may be visible when the door is open.
For standard installations, face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Drop Down Door Microwave 57 kg
TRIM OVERLAP 60 cm MODEL 76 cm MODEL
Top 5 mm 5 mmBottom 0 mm 0 mmSides 18 mm 98 mm
Electrical
Installation must comply with all applicable electrical codes and be properly grounded (earthed).
Locate the electrical supply as shown in the illustrations on the following pages. The receptacle may also be located in an adjacent cabinet within reach of the power cord. Refer to the illus-tration below for minimum power cord plug clearance.
ELECTRICAL REQUIREMENTS
Electrical Supply 220-240 V AC, 50/60 Hz
Service 1600 W
Receptacle grounding-type (earthed)
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 35
MICROWAVE OVENS
Drop Down Door Microwave Oven
STANDARD INSTALLATION
E
FRONT VIEWSIDE VIEW
NOTE: Both 60 cm and 76 cm models require the same opening dimensions.Dashed line represents profile of unit.
448 mmOPENINGHEIGHT
548 mmOPENING
DEPTH
TOP VIEW
WOPENING WIDTH
OPENING WIDTH W
60 cm Model 562 mm
76 cm Model 562 mm
BU
ILT
-IN
OV
EN
S
36 | English
MICROWAVE OVENS
Drop Down Door Microwave Oven
FLUSH INSET INSTALLATION
E
WFLUSH INSET WIDTH**
FRONT VIEWSIDE VIEW
FINISHEDCLEATS*
584 mmFLUSH INSET
DEPTH25 mm
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.
NOTE: Dashed line represents profile of unit.
460 mm FLUSH INSET
HEIGHT**
8 mm
3 mm
A
TOP VIEW
FLUSH INSET WIDTH W A
60 cm Model 603 mm 21 mm
76 cm Model 765 mm 102 mm
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 37
Warming Drawers
Wolf warming drawers are designed to take care of pre-pared foods until it’s time to serve them. You can adjust the temperature, keeping moist foods moist and crisp foods crisp. Warming drawers are ideal for proofing dough. Drawer fronts are available to match the look of Wolf ovens and sealed burner rangetops. The integrated drawer front allows for a custom panel and handle.
WARMING DRAWERS
TRANSITIONAL CONTEMPORARYPROFESSIONAL
CUSTOM PANEL
WARMING DRAWER FRONTS
M | E SERIES
INTEGRATED
BU
ILT
-IN
OV
EN
S
38 | English
578 mm
718 mm
229mm
264mm
A
BWWIDTH
546mm
OPEN DRAWER
DIMENSIONS
WARMING DRAWERS
Warming Drawers
DRAWER FRONT OPTIONS
Wolf warming drawer fronts allow for many design options, but the warming drawer itself will be the same for all appli-cations. A panel mounting kit is required when installing a custom panel. The panel mounting kit is available through an authorized Wolf dealer.
The 51 mm thick drawer front, in 76 cm and 91 cm widths, is designed to be installed below a sealed burner rangetop, so the panel aligns properly with the front of the rangetop. Dimensions for the warming drawer remain the same, even though the drawer front may be wider to match a Wolf 91 cm oven or sealed burner rangetop.
DRAWER FRONT
MODEL W
76 cm Drawer Front 759 mm91 cm Drawer Front 911 mm
M SERIES A B
Transitional | Professional 22 mm 83 mmContemporary 25 mm 86 mm
E SERIES A B
Transitional | Professional 29 mm 89 mmProfessional (51 mm thick) 54 mm 114 mmContemporary 35 mm 95 mm
INTEGRATED DRAWER FRONT
CUSTOM PANEL W H D
Typical Dimensions 759 mm 264 mm 19 mmMin Thickness 16 mm
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 39
WARMING DRAWERS
Planning Information
The warming drawer must be installed with a Wolf drawer front, avail able through an authorized Wolf dealer. Specific installation instructions are included with the drawer front.
The warming drawer can be installed in a standard or flush inset application.
For a standard installation, the drawer collar and front panel sit proud of the cabinet face frame. A recessed installation requires the cabinetry be recessed by 5 mm so the collar is flush with the cabinet face frame but the drawer front will sit proud. A flush inset installation requires the drawer collar and front panel be recessed to be flush with surrounding cabinetry. Refer to illustrations on the following pages for minimum cabinet dimensions for your specific installation.
Finish the edges of the opening. They may be visible when the drawer is open.
For standard installations, face trim will overlap stiles and rails. Refer to the chart below.
For flush inset installations, a minimum 3 mm reveal is required on all sides. To ensure consistent reveals, each corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT MIN
Warming Drawer 90 kg
TRIM OVERLAP
Top, Bottom and Sides 16 mm
ELECTRICAL
Installation must comply with all applicable electrical codes and be properly grounded (earthed). A 10A power is needed.
Locate the electrical supply flush with the back wall and within the shaded area shown in the illustrations on the following pages. For ease of installation, the electrical supply for the warming drawer can be placed in an adjacent cabinet within reach of the power cord.
ELECTRICAL REQUIREMENTSElectrical Supply 220-240 V AC, 50/60 Hz
Service 850 W
Receptacle grounding-type (earthed)
Power Cord .9 m
BU
ILT
-IN
OV
EN
S
40 | English
WARMING DRAWERS
Warming Drawer
STANDARD INSTALLATION
FRONT VIEWSIDE VIEW
TOP VIEW
NOTE: Location of electrical supply within opening may require additional cabinet depth.
584 mmOPENING
DEPTH
E
727 mmOPENING WIDTH
232 mmOPENINGHEIGHT
ANTI-TIP BLOCK
BU
ILT
-IN
OV
EN
S
subzero-wolf.com.au | 41
Warming Drawer
FLUSH INSET INSTALLATION
FRONT VIEWSIDE VIEW
TOP VIEW
*Will be visible and should be finished to match cabinetry.**Dimension provides minimum reveals.
NOTE: Location of electrical supply within opening may require additional cabinet depth.
610 mmFLUSH INSET
DEPTH
ADRAWERFRONTDEPTH
270 mmFLUSH INSET
HEIGHT**
765 mmFLUSH INSET WIDTH**
19 mm
19 mm
19 mm E
E
FINISHEDCLEATS*
ANTI-TIP BLOCK
WARMING DRAWERS
DRAWER FRONT DEPTH (A) M SERIES E SERIES
Transitional | Professional 22 mm 29 mm
Professional (51 mm thick) NA 54 mm
Contemporary 25 mm 35 mm
Custom front panel depth is dependent on panel thickness.
BU
ILT
-IN
OV
EN
S
Wolf Appliance International Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
LIMITED THIRD THROUGH FIFTH YEAR WARRANTY
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: gas burners (excluding appearance), electric heating elements, blower motors (ventilation hoods), electronic control boards, magnetron tubes and induction generators. The part(s) will be repaired or replaced, free of charge, with the owner paying for all other costs including labor. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-ties must comply to all country, state, city, local and or ordinance.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited60-day parts and labor warranty for cosmetic defects.
Wolf Appliance International Outdoor Limited Warranty*
FOR RESIDENTIAL USE
FULL ONE YEAR WARRANTY**
For one year from the date of original installation, this Wolf Appliance product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Wolf Appliance under the above warranty must be performed by Wolf factory certified service, unless otherwise specified by Wolf Appliance, Inc. Service will be provided during normal business hours.
LIMITED FIVE YEAR WARRANTY
For five years from the date of original installation, Wolf Appliance will repair or replace the following parts that prove to be defective in materials or workmanship: stainless steel briquette trays, gas valves, drip pans, electronic control boards and electric heating elements. If the owner uses Wolf factory certified service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certified service, the owner must contact Wolf Appliance, Inc. (using the information below) to receive repaired or replacement parts. Wolf Appliance will not reimburse the owner for parts purchased from non-certified service or other sources.
For more information regarding your Wolf product warranty, contact your authorized Wolf dealer. Warran-ties must comply to all country, state, city, local and or ordinance.
*Product must be approved for outdoor use, designated by model and serial number.
**Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.
subzero-wol f .com.au