Declaration of Compliance.For Plastic Food contact articles - PET.Item DescriptionArticles from PET sheet. Juice Cups (10, 12, 14, 16, 18, and 20 OZ),IC cups pet (120, 200, and 250 ml.)Water Cups (200, and 250 ml.)Filling temperature Max. 60°C.Combination ABA three layers structure.Recycle ( if founded ) In house rework In B layerStorage Temp. from 5 to 30°CHumidity 40 - 60 %

Intended Usage:Aqueous foods YesAcidic foods YesAlkali foods YesFatty foods YesDry foods YesCooled foods YesWarmed Food YesUse in conventional oven NoUse in microwave NoHot food No

This item supplied by PET for packaging is intended to come into contact with the indicated foodstuffsand comply with the following EU Commission regulations and directives under the filling/treatment andstorage conditions:

o Framework regulation (EC) 1935/2004 on materials and articles intended to come into contactwith food with following amendments.

o Framework EC/10/2011 relating to plastic materials and articles intended to come into contactwith foodstuffs with following amendments.

o Directive (EC) 2023/2006 on good manufacturing practice for materials and articlesintended to come into contact with food with following amendments.

Since March 23rd, 2015, PET for packaging materials / Egypt is also certified accordingto BRC IOP – Global Standard for Packaging. Place and date as above

All products are suitable for its intended use and have been tested for possible contamination and towardsproducts and consumers. Migration tests have therefore been carried out.

Further information available upon request.

Declaration of Compliance.For Plastic Food contact articles - PET.Migration tests:

The migration test conditions are as follows (EU Regulation 10/2011).

OVERALL MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

SPECIFIC MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

Overall migration limits are met.

Overall migration limits test available upon request.

International material recycling symbol:

The statement is based on documentation from PET for packaging materials. The declaration isindicative and applies to the product when used during normal conditions consistent with referredtemperature-, and contact constraints.

Jan. 2018.Sincerely yours.PET for packaging materials.

Declaration of Conformity.For Plastic Food contact articles - PS.Item DescriptionPS Sheets &Articles from PS sheet PS sheetsFilling temperature Max. 95°C.Combination ABA three layers structure. (HIPS & GPPS)Recycle ( if founded ) In house rework In B layer.Storage Temp. from 5 to 40°CHumidity 40 - 60 %Intended Usage:

Aqueous foods Yes

Acidic foods YesFatty foods No

Dry foods YesWarm Food Yes

Use in conventional oven Max. 95°C.

Use in microwave No

Hot food Yes

This item supplied by PET for packaging is intended to come into contact with the indicated foodstuffsand comply with the following EU Commission regulations and directives under the filling/treatment andstorage conditions:

o Framework regulation (EC) 1935/2004 on materials and articles intended to come into contactwith food with following amendments.

o Framework EC/10/2011 relating to plastic materials and articles intended to come into contactwith foodstuffs with following amendments.

o Directive (EC) 2023/2006 on good manufacturing practice for materials and articlesintended to come into contact with food with following amendments.

Since March 23rd, 2015, PET for packaging materials / Egypt is also certifiedaccording to BRC IOP – Global Standard for Packaging.

All products are suitable for its intended use and have been tested for possible contamination and towardsproducts and consumers. Migration tests have therefore been carried out.

Further information available upon request.

Declaration of Conformity.For Plastic Food contact articles - PET.Migration tests:

The migration test conditions are as follows (EU Regulation 2011/10).

OVERALL MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

SPECIFIC MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

All Overall & Specific migration limits are met.

Overall & Specific migration limits test available upon request.

International material recycling symbol:

The statement is based on documentation from PET for packaging materials. The declaration isindicative and applies to the product when used during normal conditions consistent with referred

temperature-, and contact constraints.

Jan. 2018Sincerely yours.PET for packaging materials.

Declaration of conformity.For Plastic Food contact articles - PET.Item DescriptionArticles from PET sheet_ Agricultural Fruit trays (250, 500, and 750) and their lidsClam shells (227, 250, 500, 750, and 750).Filling temperature Max. 60°C.Combination ABA three layers structure.Recycle ( if founded ) In house rework In B layerStorage Temp. from 5 to 30°CHumidity 40 - 60 %

Intended Usage:Aqueous foods NoVegetables YesFrozen vegetables YesAcidic foods YesAlkali foods YesFatty foods YesDry foods YesWarmed Food YesCooled food Yes

This item supplied by PET for packaging is intended to come into contact with the indicated foodstuffsand comply with the following EU Commission regulations and directives under the filling/treatment andstorage conditions:

o Framework regulation (EC) 1935/2004 on materials and articles intended to come into contactwith food with following amendments.

o Framework EC/10/2011 relating to plastic materials and articles intended to come into contactwith foodstuffs with following amendments.

o Directive (EC) 2023/2006 on good manufacturing practice for materials and articlesintended to come into contact with food with following amendments.

Since March 23rd, 2015, PET for packaging materials / Egypt is also certifiedaccording to BRC IOP – Global Standard for Packaging.

All products are suitable for its intended use and have been tested for possible contamination and towardsproducts and consumers. Migration tests have therefore been carried out.

Further information available upon request.

Declaration of Conformity.For Plastic Food contact articles - PET.Migration tests:

The migration test conditions are as follows (EU Regulation 10/2011).

OVERALL MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

SPECIFIC MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

Overall migration limits are met.

Overall migration limits test available upon request.

International material recycling symbol:

The statement is based on documentation from PET for packaging materials. The declaration isindicative and applies to the product when used during normal conditions consistent with referredtemperature-, and contact constraints.

Jan. 2018.Sincerely yours.PET for packaging materials.

Declaration of Conformity.For Plastic Food contact articles - PS.Item DescriptionPS Sheets &Articles from PS sheet PS sheetsFilling temperature Max. 95°C.Combination ABA three layers structure. (HIPS & GPPS)Recycle ( if founded ) In house rework In B layer.Storage Temp. from 5 to 40°CHumidity 40 - 60 %Intended Usage:

Aqueous foods Yes

Acidic foods YesFatty foods No

Dry foods YesWarm Food Yes

Use in conventional oven Max. 95°C.

Use in microwave No

Hot food Yes

This item supplied by PET for packaging is intended to come into contact with the indicated foodstuffsand comply with the following EU Commission regulations and directives under the filling/treatment andstorage conditions:

o Framework regulation (EC) 1935/2004 on materials and articles intended to come into contactwith food with following amendments.

o Framework EC/10/2011 relating to plastic materials and articles intended to come into contactwith foodstuffs with following amendments.

o Directive (EC) 2023/2006 on good manufacturing practice for materials and articlesintended to come into contact with food with following amendments.

Since March 23rd, 2015, PET for packaging materials / Egypt is also certifiedaccording to BRC IOP – Global Standard for Packaging.

All products are suitable for its intended use and have been tested for possible contamination and towardsproducts and consumers. Migration tests have therefore been carried out.

Further information available upon request.

Declaration of Conformity.For Plastic Food contact articles - PET.Migration tests:

The migration test conditions are as follows (EU Regulation 2011/10).

OVERALL MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

SPECIFIC MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

All Overall & Specific migration limits are met.

Overall & Specific migration limits test available upon request.

International material recycling symbol:

The statement is based on documentation from PET for packaging materials. The declaration isindicative and applies to the product when used during normal conditions consistent with referred

temperature-, and contact constraints.

Jan. 2018Sincerely yours.PET for packaging materials.

Declaration of Conformity.For Plastic Food contact articles - PET.Item DescriptionArticles from PET sheet. Bowls (1000, 750, 500, 250, and 180 cc), Trays(1000, 750 cc, 12, 8, 6, and 4 Oz, Sauce 2 & 1.5 Oz)Filling temperature Max. 60°C.Combination ABA three layers structure.Recycle ( if founded ) In house recycle In B layerStorage Temp. from 5 to 30°CHumidity 40 - 60 %Intended Usage:

Aqueous foods YesAcidic foods YesFatty foods YesDry foods YesCooled foods YesWarm Food YesUse in conventional oven NoUse in microwave NoHot food No

This item supplied by PET for packaging is intended to come into contact with the indicated foodstuffsand comply with the following EU Commission regulations and directives under the filling/treatment andstorage conditions:

o Framework regulation (EC) 1935/2004 on materials and articles intended to come into contactwith food with following amendments.

o Framework EC/10/2011 relating to plastic materials and articles intended to come into contactwith foodstuffs with following amendments.

o Directive (EC) 2023/2006 on good manufacturing practice for materials and articlesintended to come into contact with food with following amendments.

Since March 23rd, 2015, PET for packaging materials / Egypt is also certifiedaccording to BRC IOP – Global Standard for Packaging.

All products are suitable for its intended use and have been tested for possible contamination and towardsproducts and consumers. Migration tests have therefore been carried out.

Further information available upon request.

Declaration of Conformity.For Plastic Food contact articles - PET.Migration tests:

The migration test conditions are as follows (EU Regulation 2011/10).

OVERALL MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

SPECIFIC MIGRATIONFood Simulant Contact conditionEthanol 10% v/v in aqueous solution 10 days at 40°C

Acetic acid in aqueous solution 3% w/v 10 days at 40°C

Rectified olive oil 10 days at 40°C

All Overall & Specific migration limits are met.

Overall & Specific migration limits test available upon request.

International material recycling symbol:

The statement is based on documentation from PET for packaging materials. The declaration isindicative and applies to the product when used during normal conditions consistent with referred

temperature-, and contact constraints.

Jan. 2018Sincerely yours.PET for packaging materials.