Dealer Reference Guide

ShoreLand'r - LE

LEB2314CSW 1LEXR2314CSW 2LEB2314CLW 3LEXR2314CLW 4LEB30CBSW 5LEXR30CBSW 6LEB30CBLW 7LEXR30CBLW 8LEB30CBXLW 9LEXR30CBXLW 10LEB40TCBLW 11LEXR40TCBLW 12LEB40TCBBLW 13LEXR40TCBBLW 14LEB40TCBXLW 15LEXR40TCBXLW 16LEB40TCBBXLW 17LEXR40TCBBXW 18LEB46TCBS 19LER46TCBS 20LEB46TCBBS 21LER46TCBBS 22LEB46TCBL 23LER46TCBL 24LER46TCBBL 25LEB55TCBBL 26LER55TCBBL 27

Table of ContentsShoreLand'r - LE 20080729

Dealer Reference Guide

LEB2314CSW

Specifications

Minimum Hull Length 17' :Maximum Hull Length 19' :

Maximum Transom to Bow Eye 17' 4":Capacity 2300 lbs.:

Ship Weight 585 lbs.:GVWR 2995 lbs.:GAWR 2995 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 20' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Class II :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 9' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Optional) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 1 20080729

Dealer Reference Guide

LEXR2314CSW

Specifications

Minimum Hull Length 17' :Maximum Hull Length 19' :

Maximum Transom to Bow Eye 17' 4":Capacity 2300 lbs.:

Ship Weight 650 lbs.:GVWR 2995 lbs.:GAWR 2995 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 20' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Class II :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :

Rollers (# - type) 24 :Length of Roller Rack Front 25" Rear 57"

Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Optional) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style XR Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 2 20080729

Dealer Reference Guide

LEB2314CLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 2300 lbs.:

Ship Weight 595 lbs.:GVWR 2995 lbs.:GAWR 2995 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 21' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" swing Inches:

Coupler Size 2" Class II :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Optional) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 3 20080729

Dealer Reference Guide

LEXR2314CLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 2300 lbs.:

Ship Weight 660 lbs.:GVWR 2995 lbs.:GAWR 2995 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 21' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Class II :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :

Rollers (# - type) Front 8 :Rollers (# - type) Rear 16 :

Length of Roller Rack Rear 57 Inches:Length of Roller Rack Front 25 Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Optional) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 4 20080729

Dealer Reference Guide

LEB30CBSW

Specifications

Minimum Hull Length 17' :Maximum Hull Length 19' :

Maximum Transom to Bow Eye 17' 4":Capacity 3000 lbs.:

Ship Weight 660 lbs.:GVWR 3740 lbs.:GAWR 3740 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 21' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 9' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Standard) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 5 20080729

Dealer Reference Guide

LEXR30CBSW

Specifications

Minimum Hull Length 17' :Maximum Hull Length 19' :

Maximum Transom to Bow Eye 17' 4":Capacity 3000 lbs.:

Ship Weight 735 lbs.:GVWR 3740 lbs.:GAWR 3740 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 21' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :

Rollers (# - type) Rear - 16 :Rollers (# - type) Front - 8 :

Length of Roller Rack Rear - 57 Inches:Length of Roller Rack Front - 25 Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Standard) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 6 20080729

Dealer Reference Guide

LEB30CBLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 3000 lbs.:

Ship Weight 670 lbs.:GVWR 3740 lbs.:GAWR 3740 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 22' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Standard) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 7 20080729

Dealer Reference Guide

LEXR30CBLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 3000 lbs.:

Ship Weight 735 lbs.:GVWR 3740 lbs.:GAWR 3740 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 22' 5":

Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :

Rollers (# - type) Rear - 16 :Rollers (# - type) Front - 8 :

Length of Roller Rack Rear - 57 Inches:Length of Roller Rack Front - 25 Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Standard) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 8 20080729

Dealer Reference Guide

LEB30CBXLW

Specifications

Minimum Hull Length 19' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 3000 lbs.:

Ship Weight 670 lbs.:GVWR 3740 lbs.:GAWR 3740 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Max. Overall Length 22' 5":Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:Coupler Size 2" Brake actuator :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Standard) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 9 20080729

Dealer Reference Guide

LEXR30CBXLW

Specifications

Minimum Hull Length 19' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 3000 lbs.:

Ship Weight 700 lbs.:GVWR 3740 lbs.:GAWR 3740 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Max. Overall Length 22' 5":Frame Height 22.5 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:Coupler Size 2" Brake Actuator :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Rollers (# - type) Rear - 16 :Rollers (# - type) Front - 8 :

Length of Roller Rack Rear - 57 Inches:Length of Roller Rack Front - 25 Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 1 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc (Standard) :Brake Actuator Model UFP Model A70 :

Lighting Sealed LED :Wire Harness Fully Grounded :Trailer Style XR Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 10 20080729

Dealer Reference Guide

LEB40TCBLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 4000 lbs.:

Ship Weight 970 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 22' 5":

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25" Hook :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Overall Width (w/base pads) ' :

Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 11 20080729

Dealer Reference Guide

LEXR40TCBLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 19' :

Maximum Transom to Bow Eye 17' 2":Capacity 4000 lbs.:

Ship Weight 1025 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.75 Inches:

Max. Overall Length 22' 5":Frame Height 24 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65 Swing Inches:Coupler Size 2" Brake Actuator :

Axle Size or Style 2"x3"x7 ga. Tube :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Rollers (# - type) Rear - 16 Cushion :Rollers (# - type) Front - 8 Cushion :

Length of Roller Rack Rear - 57 Inches:Length of Roller Rack Front - 25 Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style XR Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 12 20080729

Dealer Reference Guide

LEB40TCBBLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 4000 lbs.:

Ship Weight 1020 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 22' 5":

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25" Hook :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 13 20080729

Dealer Reference Guide

LEXR40TCBBLW

Specifications

Minimum Hull Length 18' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 4000 lbs.:

Ship Weight 1070 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 12 Inches:Max. Overall Length 22' 5":

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25" Hook :Number of Leaves 5 :

Rollers (# - type) Rear - 16 Cushion :Rollers (# - type) Front - 8 Cushion :

Length of Roller Rack Front - 25 Inches:Length of Roller Rack Rear - 57 Inches:

Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10"Disc Standard 2 Axles

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 14 20080729

Dealer Reference Guide

LEB40TCBXLW

Specifications

Minimum Hull Length 19' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 4000 lbs.:

Ship Weight 980 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Max. Overall Length 22' 5":Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:Coupler Size 2" Brake Actuator :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25" Hook :

Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 15 20080729

Dealer Reference Guide

LEXR40TCBXLW

Specifications

Minimum Hull Length 19' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 2":Capacity 4000 lbs.:

Ship Weight 1035 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.75 Inches:

Max. Overall Length 22' 5":Frame Height 24 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65 Swing Inches:Coupler Size 2" Brake Actuator :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Rollers (# - type) Rear - 16 Cushion :Rollers (# - type) Front - 8 Cushion :

Length of Roller Rack Rear -57 Inches:Length of Roller Rack front - 25 Inches:

Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style XR Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 16 20080729

Dealer Reference Guide

LEB40TCBBXLW

Specifications

Minimum Hull Length 19' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 4000 lbs.:

Ship Weight 1030 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Max. Overall Length 22' 5":Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:Coupler Size 2" Brake Actuator :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25" Hook :

Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 10' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 17 20080729

Dealer Reference Guide

LEXR40TCBBXW

Specifications

Minimum Hull Length 19' :Maximum Hull Length 20' :

Maximum Transom to Bow Eye 18' 4":Capacity 4000 lbs.:

Ship Weight 1080 lbs.:GVWR 5440 lbs.:GAWR 2720 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x4"x11 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Max. Overall Length 22' 5":Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:Coupler Size 2" Brake Actuator :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25" Hook :

Number of Leaves 5 :Rollers (# - type) Rear - 16 Cushion :Rollers (# - type) Front - 8 Cushion :

Length of Roller Rack Front - 25 Inches:Length of Roller Rack Rear - 57 Inches:

Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1802A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axles

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style XR Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 18 20080729

Dealer Reference Guide

LEB46TCBS

Specifications

Minimum Hull Length 19' :Maximum Hull Length 23' :

Maximum Transom to Bow Eye 21' 8":Capacity 4600 lbs.:

Ship Weight 1119 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 25' :

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 12' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 19 20080729

Dealer Reference Guide

LER46TCBS

Specifications

Minimum Hull Length 19' :Maximum Hull Length 23' :

Maximum Transom to Bow Eye 21' 8":Capacity 4600 lbs.:

Ship Weight 1170 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 25' :

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :

Rollers (# - type) 24 :Length of Roller Rack 77 Inches:Keel Rollers (# - size) 6 - 8" :

Keel Protective Pads (# - size) 3 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 20 20080729

Dealer Reference Guide

LEB46TCBBS

Specifications

Minimum Hull Length 19' :Maximum Hull Length 23' :

Maximum Transom to Bow Eye 21' 8":Capacity 4600 lbs.:

Ship Weight 1155 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 25' :

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 12' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axles

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 21 20080729

Dealer Reference Guide

LER46TCBBS

Specifications

Minimum Hull Length 19' :Maximum Hull Length 23' :

Maximum Transom to Bow Eye 21' 8":Capacity 4600 lbs.:

Ship Weight 1206 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 25' :

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :

Rollers (# - type) 24 :Length of Roller Rack 77 Inches:Keel Rollers (# - size) 6 - 8" :

Keel Protective Pads (# - size) 3 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axles

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Roller :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 22 20080729

Dealer Reference Guide

LEB46TCBL

Specifications

Minimum Hull Length 20' 6":Maximum Hull Length 24' 6":

Maximum Transom to Bow Eye 23' 2":Capacity 4600 lbs.:

Ship Weight 1139 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 26' 6":

Frame Height 23 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Axle Size or Style 2"x3"x7 ga. :

Hub Size 1 3/8" X 1 1/16" :Bolt Pattern 5 bolts on 4.5" :

Bearing Protectors Standard :Suspension Type Leaf Spring :

Spring Length 25 (Hook) :Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 14' :Keel Protective Pads (# - size) 2 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 23 20080729

Dealer Reference Guide

LER46TCBL

Specifications

Minimum Hull Length 20' 6":Maximum Hull Length 24' 6":

Maximum Transom to Bow Eye 23' 2":Capacity 4600 lbs.:

Ship Weight 1190 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 3"x5" I-beam :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 26' 6":

Frame Height 24 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Tongue Jack Optional :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Rollers (# - type) 24 :

Length of Roller Rack 77 Inches:Keel Rollers (# - size) 6 - 8" :

Keel Protective Pads (# - size) 3 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 1 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 24 20080729

Dealer Reference Guide

LER46TCBBL

Specifications

Minimum Hull Length 20' 6":Maximum Hull Length 24' 6":

Maximum Transom to Bow Eye 23' 2":Capacity 4600 lbs.:

Ship Weight 1226 lbs.:GVWR 5920 lbs.:GAWR 2960 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"X5"X10 ga.. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 26' 6":

Frame Height 24 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x11 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2" Brake Actuator :Tongue Jack Optional :

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Rollers (# - type) 24 :

Length of Roller Rack 77 Inches:Keel Rollers (# - size) 6 - 8" :

Keel Protective Pads (# - size) 3 - 15" :Keel Protective Pads (# - size) 2 - 12" :

Winch DL1800A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axle

:

Brake Actuator Model UFP Model A70 :Lighting Sealed LED :

Wire Harness Fully Grounded :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 25 20080729

Dealer Reference Guide

LEB55TCBBL

Specifications

Minimum Hull Length 20' 6":Maximum Hull Length 24' :

Maximum Transom to Bow Eye 22' 8":Capacity 5500 lbs.:

Ship Weight 1280 lbs.:GVWR 7040 lbs.:GAWR 3520 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 26' 8":

Frame Height 24 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x7 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2 5/16" Brake Actuator

:

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 14' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL2500A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axles

:

Brake Actuator Model UFP 8,000 lb. :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 26 20080729

Dealer Reference Guide

LER55TCBBL

Specifications

Minimum Hull Length 20' 6":Maximum Hull Length 24' :

Maximum Transom to Bow Eye 22' 8":Capacity 5500 lbs.:

Ship Weight 1280 lbs.:GVWR 7040 lbs.:GAWR 3520 lbs.:

Tire Size ST215/75R14-C :Wheel Style Chrome :Frame Size 2"x5"x10 ga. :

Frame Width 80.5 Inches:Overall Width 101.5 Inches:

Rear Cross Member Adjustment 18 Inches:Max. Overall Length 26' 8":

Frame Height 24 Inches:Fender Style 10" Poly W/Steps &

Alum. Treadbrite Skin

:

Width Between Fenders 84.5 Inches:Tongue Tube Size 3"x5"x7 ga. :

Tongue Length 65" Swing Inches:

Coupler Size 2 5/16" Brake Actuator

:

Axle Size or Style 2"x3"x7 ga. :Hub Size 1 3/8" X 1 1/16" :

Bolt Pattern 5 bolts on 4.5" :Bearing Protectors Standard :

Suspension Type Leaf Spring :Spring Length 25 (Hook) :

Number of Leaves 5 :Bunk Dimensions 2"x6" :

Bunk Length 14' :Keel Protective Pads (# - size) 2 - 12" :Keel Protective Pads (# - size) 2 - 15" :

Winch DL2500A :Winch Line 2" Nylon Strap :

Brake Size / Style 10" Disc Standard 2 Axles

:

Brake Actuator Model UFP 8,000 lb. :Lighting Sealed LED :

Wire Harness Fully Grounded :Trailer Style Bunk :

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 27 20080729

Dealer Reference Guide

Service Kits/Accessories

Part Number: Description:Accessory

6133300 ADJUSTABLE TRANSOM SAVERR (45"-57" LENGTH) WITH ATTACHING BRACKET FOR 3 X 3" CROSSMEMBER

6133400 ADJUSTABLE TRANSOM SAVER (26"-38" LENGTH) WITH ATTACHING BRACKET FOR 3 X 3" CROSSMEMBER.

SK0078 ONE PAIR, TIE-DOWN BRACKETS FOR ATTACHING TO A 3X3 REAR CROSS MEMBER. USED AS ATTACHING POINTS FOR TRANSOM TIE-DOWNS. INCLUDES MOUNTING HARDWARE.T

SS1154 UTILITY TIE DOWN KIT. BRACKETS ARE DESIGNED TO HOOK UNDER AND BE ATTACHED TO ANY 2" WIDE TUBING. KIT CONSISTS OF FOUR TIE DOWN BRACKETS AND ATTACHING SCREWS.

TA0102 INBOARD PROP PROTECTOR FOR 80" WIDE FRAMES. FITS BOTH 2" X 4" AND 2" X 5" FRAME TRAILERS. SPECIFY COLOR WHEN ORDERING.

TA0120 RETRACTABLE TIE TOWNS THAT ARE SOLD IN PAIRS WITH ATTACHING HARDWARE. THESE WILL ONLY ATTACH TO THE NEW FULL GROUNDING TAILLIGHT BRKT. ANY OTHER ATTACHING METHOD WILL HAVE TO MODIFIED BY THE CONSUMER.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 28 20080729

Dealer Reference Guide

Part Number: Description:Accessory

TA0124 REAR BUNK LOADGUIDE FOR BOTH A 2X4 AND 2X5 FRAME. THIS LOADGUIDE ATTACHES TO THE SIDE FRAME AND CAN BE SLID UP AND DOWN THE FRAME FOR A FINER ADJUSTMENT AND IS PUNCHED WITH 5 ADJUSTMENT HOLES TO MOVE THE LOADGUIDE IN OR OUT TO FIT THE WIDTH OF THE BOAT. L

Part Number: Description:Chassis

4510644 WIRE RETAINER FOR UFP DISC BRAKE CALIPERS

SK0045 LEFT HAND UFP 9.75 DISC BRAKE CALIPER (4410289). INCLUDES THE MOUNTING HARDWARE AND THE BRASS BRAKE LINE FITTING.

SK0046 RIGHT HAND UFP 9.75 DISC BRAKE CALIPER (4410290). INCLUDES THE ATTACHING HARDWARE AND THE BRASS BRAKE LINE FITTING.

SK0103 BRAKE LINE MOUNTING CLIPS (4510520) FOR 3/16" DIAMETER BRAKE LINE. DOES NOT INCLUDE SCREWS. USE 1/4" X #10 SELF TAPPING SCREWS TO MOUNT CLIPS. FIVE (5) CLIPS PER KIT.

SK0104 90" BRAKE LINE KIT. INDLUDES THE 90" BRAKE LINE, MOUNTING CLIPS AND SELF TAPPING SCREWS.

SK0107 UFP 10" VENTED DISC BRAKE ROTOR (4410291). KIT INCLUDES BEARINGS, SEALS, HARDWARE AND BEARING BRA.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 29 20080729

Dealer Reference Guide

Part Number: Description:Chassis

SK0112 BEARING BUDDY PROTECTORS FOR 1 1/16" OUTER BEARING 5 LUG HUBS. 1.980" O.D. KIT CONTAINS ONE PAIR.

SK0202 TANDEM AXLE FENDER SKIN. OUTER SKIN TO COLOR MATCH THE FENDER WITH THE REST OF THE TRAILER. MUST ORDER CORRECT COLOR. ONE PIECE PER KIT.

SK0203 LT. REAR 24 1/2" RUNNING BOARD.FOR LE SERIES TRAILERS. COMPLETE WITH NON-SKID SURFACE AND MOUNTING HARDWARE.

SK0204 RT. REAR 24 1/2" RUNNING BOARD.FOR LE SERIES TRAILERS. COMPLETE WITH NON-SKID SURFACE AND MOUNTING HARDWARE.

SK0207 BLACK NONSKID GRIT FOR RUNNING BOARDS. SIZE: 6 X 16 5/8".

SK0208 BLACK NONSKID GRIT FOR RUNNING BOARDS. SIZE: 6 X 24".

SK0213 LE SERIES FENDER WIRE SHILD. LOCATED INSIDE THE FRONT AND REAR OF FENDER TO PROTECT WIRES FROM THE ELELMENTS. INCLUDES MOUNTING HARDWARE. ONE PC. PER KIT.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 30 20080729

Dealer Reference Guide

Part Number: Description:Chassis

SK0214 LE SERIES RUNNING BOARD MOUNTING BRACKET. USED FOR ATTACHING THE REAR STEP TO THE FENDER. INCLUDES MOUNTING HARDWARE. ONE PC. PER KIT.

SK0221 OUTER ACTUATOR HOUSING FOR UFP ACTUATOR. INCLUDES THE PLASTIC CAP. FITS 3X5" TONGUES. FOR EITHER DRUM OR DISC BRAKE SYSTEMS

SK0222 OUTER ACTUATOR HOUSING FOR UFP ACTUATOR. INCLUDES THE PLASTIC CAP. FITS 3X5" SWING TONGUES. FOR EITHER DRUM OR DISC BRAKE SYSTEMS

SK0225 INNER PORTION OF UFP DISC BRAKE ACTUATOR. SAME AS PART NO.3991015. INCLUDES THE REVERSING SOLENOID. FITS ALL UFP ACTUATOR HOUSINGS UP TO 8,000 LB. GVWR

SK0287 SMALL ROCKER FOR TANDEM TRAILERS 3000# THRU 6800# COMES WITH 1 ROCKER AND HARDWARE.

SK4510562 BRAKE HOSE ASSEMBLY. REPLACES TANDEM BRAKE AXLE CONNECTION.

SK4510563 TONGUE BRAKE HOSE ASEMBLY.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 31 20080729

Dealer Reference Guide

Part Number: Description:Chassis

SK4510564 FRAME BRAKE HOSE ASSEMBLY FOR ALL BRAKE MODEL TRAILERS 4000 LBS AND BELOW.

SK4510565 FRAME BRAKE HOSE ASSEMBLY FOR ALL BRAKE MODEL TRAILERS 4600 LBS. AND ABOVE.

SK4510566 AXLE BRAKE HOSE ASSEMBLY.

SS1101 BRAKE FLUSH KIT. COMPLETE WITH ALL HOSE, FITTINGS AND ATTACHING HARDWARE FOR A SINGLE AXLE TRAILER WITH BRAKES.

SS1102 BRAKE FLUSH KIT. COMPLETE WITH ALL HOSE, FITTINGS AND ATTACHING HARDWARE FOR A 2ND. AXLE ON TANDEM TRAILERS WITH BRAKES.

SS1163 9" FENDER REPLACEMENT KIT. INCLUDES ONE FENDER WITH ATTACHING HARDWARE. FENDER DRILLED TO FIT THE LEFT FRONT OR RIGHT REAR SIDE OF A TANDEM AXLE TRAILER.

SS1164 9" FENDER REPLACEMENT KIT. INCLUDES ONE FENDER INDIVIDUALLY BOXED WITH ATTACHING HARDWARE. FENDER IS DRILLED FOR CLEARANCE LIGHT. FENDER MOUNTS TO THE RIGHT FRONT OR LEFT REAR OF A TANDEM TRAILER.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 32 20080729

Dealer Reference Guide

Part Number: Description:Chassis

SS1187 10" DISC BRAKE KIT FOR SINGLE AXLE TRAILERS 2300-3000 LB. CAPACITY. FITS BOTH 74.5" AND 80" WIDE 2X4" FRAMES. CONTAINS 10" DISC ROTORS WITH BEARINGS AND SEALS, CALIPERS, ACTUATOR, AND BRAKE LINE TUBING AND HOSE TO CONNECT SYSTEM. INCLUDES MOUNTING HARDWA

SS1193 BRAKE BLEEDER KIT. FOR 8,000 GVWR UFP ACTUATOR. KIT ATTACHES TO THE ACTUATOR RESERVOIR FILL PORT SO YOU CAN CONNECT A POWER BLEEDER TO THE SYSTEM.

SS734 1&3/8 1&1/16 HUB & BEARING KIT. COMPLETE BEARING SET WITH DUST SEAL, FLAT WASHER, NUT, COTTER KEY, AND BEARING PROTECTOR WITH BRA. ALL INNER PARTS NEEDED FOR ONE HUB. ALSO INCLUDES FIVE LUG NUTS. REPLACES THE OLD T-89.

SSBK1163 fender with hardware no lights

SSBK1164 fender with hardware no lights

TA0007 BEARY BUDDY PROTECTORS FOR HUBS WITH A 1 1/16" OUTER BEARING. BEARING BUDDY O.D. IS 1.98 HUBS. REPLACES 4410247. INCLUDES BRAS. 2 PER KIT.

TA0013 DRUM BRAKE AXLE ASSEMBLY FOR 80IN WIDE FRAMES. DOES NOT INCLUDE AXLE PAD - MAINLY BUNDLED FOR SEARAY, CAN BE USED FOR SHORELANDR MODELS JUST ORDER THE PAD KIT ALSO.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 33 20080729

Dealer Reference Guide

Part Number: Description:Chassis

TA0014 DISCBRAKE AXLE ASSEMBLY FOR 80IN WIDE FRAMES. DOES NOT INCLUDE AXLE PAD - MAINLY BUNDLED FOR SEARAY, CAN BE USED FOR SHORELANDR MODELS JUST ORDER THE PAD KIT ALSO.

TA0016 ELECTRIC OVER HYDRAULIC BRAKE KIT, COMPLETE WITH WIRE HARNESSES AND REPLACEMENT COUPLER. FOR UNDER 6000 LBS. GVWR TRAILERS.

TA1188 2ND. AXLE BRAKE KIT. INCLUDES 1 PR. 10" DISC ROTORS WITH BEARINGS, CALIPERS AND ATTACHING BOLTS,BRAKE HOSE, BRAKE LINES, SCREWS AND CLIPS TO MOUNT THE BRAKE LINES TO THE AXLE. ALSO INCLUDES THE BRAKE LINE AND TEE TO CONNECT INTO THE FRAME BRAKE LINE. KIT

Part Number: Description:Conversion

SS913 1 PR. XR ROLLER ARM ASSEMBLIES COMPLETE WITH MOUNTING HARDWARE AND BRACKETS. SPECIFY COLOR WHEN ORDERING.

Part Number: Description:Lighting

SK0011 REPLACEMENT AMBER SIDE MARKER LIGHT. INCLUDES MOUNTING BEZEL AND RIVETS.

SK0038 THREE LIGHT CLUSTER COMPLETE WITH WASHERS AND SELF-TAPPING MOUNTING SCREWS. LIGHT HAS BOTH A BROWN AND WHITE 48" PIGTAIL FOR ATTACHING INTO THE FRAME HARNESS.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 34 20080729

Dealer Reference Guide

Part Number: Description:Lighting

SK0039 MOLDED PLASTIC LICENSE PLATE BRACKET THAT ACCOMMODATES MOST STANDARD SIZE LICENSE PLATES. INCLUDES THE MOUNTING HARWARE.

SK0108 AMBER SIDE MARKER LIGHT (5110456) REPLACEMENT KIT. USED IN LONG TONGUES IN COMBINATION WITH A JUMPER WIRE TO CONNECT THESE LIGHTS INTO THE FRAME HARNESS WITH THE STANDARD FRAME LIGHTS.

SK0123 RED SIDE MARKER LIGHT AND BEZEL. INCLUDES MOUNTING HARDWARE.

SK0211 RIGHT WESBAR OVER 80" TAILLIGHT ASSEMBLY. USED ON LE SERIES TRAILERS. COMPLETE WITH THE MOUNTING HARDWARE.

SK0212 LEFT WESBAR OVER 80" TAILLIGHT ASSEMBLY. USED ON LE SERIES TRAILERS. COMPLETE WITH THE MOUNTING HARDWARE.

SK3510368 ADHESIVE BACKED GRIP PAD. MOUNTS ON LOW-PROFILE STYLE TAIL LIGHT BRACKETS

SK3510598 SHORELAND'R STEP PAD THATIS MADE OF A POLY PLASTIC THAT FITS THE FULLY GROUNDED TAILLIGHT BRACKET.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 35 20080729

Dealer Reference Guide

Part Number: Description:Lighting

SK5110559 TONGUE HARNESS FOR TRAILERS WITHOUT BRAKES. FULLY GROUNDED HARNESS ONLY

SK5110560 TONGUE HARNESS FOR TRAILERS WITHOUT BRAKES. FULLY GROUNDED HARNESS ONLY. USED WITH LONG TONGUES WITH TONGUE-MOUNTED LED LIGHTS

SK5110561 TONGUE HARNESS FOR TRAILERS WITH BRAKES. FULLY GROUNDED HARNESS ONLY

SK5110562 TONGUE HARNESS FOR TRAILERS WITH BRAKES. FULLY GROUNDED HARNESS ONLY. USED WITH LONG TONGUES WITH TONGUE-MOUNTED LED LIGHTS

SK5110565 RIGHT SIDE FRAME HARNESS FOR 2X4 TRAILERS. FULLY GROUNED HARNESS ONLY.

SK5110566 LEFT SIDE FRAME HARNESS FOR 2X4 TRAILERS. FULLY GROUNED HARNESS ONLY.

SK5110567 RIGHT SIDE FRAME HARNESS FOR 2X5AND INBOARD TRAILERS. FULLY GROUNED HARNESS ONLY.

SK5110568 LEFT SIDE FRAME HARNESS FOR 2X5 AND INBOARD TRAILERS. FULLY GROUNED HARNESS ONLY.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 36 20080729

Dealer Reference Guide

Part Number: Description:Lighting

SK5110569 RIGHT HAND TAIL LIGHT. PETERSON LOW PROFILE LED.

SK5110570 LEFT HAND TAIL LIGHT. PETERSON LOW PROFILE LED.

SK5110571 ID BAR (3 LIGHT CLUSTER). PETERSON LED.

SK5110572 YELLOW SIDE MARKER OR CLEARANCE LIGHT. PETERSON LED. USE ONLY WITH FULLY GROUNDED HARNESS

Part Number: Description:Load Guide

SS1025 8' LONG 2X4" CARPETED LOADGUIDES. HARDWARE. MOUNTS TO TRAILER FRAME WITH A FRONT AND REAR UPRIGHT BRACKET. ADJUSTABLE FOR HEIGHT. FITS 2X4 AND 2X5 FRAMES. INCLUDES ATTACHING HARDWARE. AVAILABLE IN WHITE,BLACK AND GALVANIZED FINSIH. SPECIFY FINISH WHEN O

SS1025G 8' LONG 2X4" CARPETED LOADGUIDES. GALV. HARDWRE. MOUNTS TO TRAILER FRAME WITH A FRONT AND REAR UPRIGHT BRACKET. ADJUSTABLE FOR HEIGHT. FITS 2X4 AND 2X5 FRAMES. INCLUDES ATTACHING HARDWARE.

TA1032 SPRING LOADED POST LOAD GUIDE USED ON THE INBOARD TRAILERS. MOUNTS TO THE REAR CROSS MEMBER. SAME AS THE OLD SS1032. CAN ALSO BE MOUNTED ON 2X4" AND 2X5" STANDARD FRAMES, LE, AND ALUMINUM REAR CROSS MEMBERS AS POST LOAD GUIDES. AVAILABLE IN PAINTED OR GA

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 37 20080729

Dealer Reference Guide

Part Number: Description:Load Guide

TA1134 30" CARPETED BUNK STYLE LOAD GUIDE THAT ATTACHES TO THE REAR CROSS MEMBER OF 2X3", 2X4" AND 2X5" FRAMES. ADJUSTABLE FOR WIDTH. AVILABLE IN MULTIPLE COLORS AND GALVANIZED. SPECIFY COLOR AND FINISH WHEN ORDERING.

Part Number: Description:Misc

SK0016 REPLACEMENT LEFT STEP PAD FOR TAILLIGHT BRACKET AND LEFT STEP ON THE DOCK LADDER. STEP PAD HAS THE RADIUS ON THE RIGHT HAND SIDE. INCLUDES THE MOUNTING HARDWARE.

SK0017 REPLACEMENT RIGHT HAND STEP PAD USED ON THE RIGHT TAILLIGHT BRACKET AND RIGHT STEP OF THE DOCK LADDER. STEP PAD HAS THE RADIUS ON THE LEFT HAND SIDE. INCLUDES THE MOUNTING HARDWARE.

Part Number: Description:Risers

SS1000 RISER KIT FOR RAISING THE REAR ROLLER RACKS OR BUNK SYSTEM ON 2X3" AND 2X4" FRAMES, LE, AND ALUMINUM TRAILERS. ALSO USED FOR RAISING THE XR ARMS ON THE FRONT CROSS MEMBER. KIT WILL ALLOW THE ROLLER RACKS TO BE RAISED 1" HIGHER THAN NORMAL SHIP POSITION.

SS1003 KEEL GUIDE ROLLER RISER KIT. USED TO RAISE THE FRONT KEEL ROLLER SYSTEM AN ADDITIONAL 3/4" ON ALL 2X4" AND 2X5" FRAMES, RB AND ROLLER ALUMINUM TRAILERS. TRAILERS ARE SHIPPED WITH ONE SS1003 ASSEMBLED INSIDE THE KEEL CRADLE BRACKET. THE SS1003 KIT IS USED

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 38 20080729

Dealer Reference Guide

Part Number: Description:Risers

SS1043 BUNK RISER KIT. MOUNTS TO THE TOP OF A STANDARD BUNK BRACKET EXTENDING IT BY 3". KIT INCLUDES THE MOUNTING BOLTS AND NUTS. KIT INCLUDES PARTS FOR RAISING 2 BUNK BRACKETS.

SS1212 3" RISER KIT FOR 6,000-15,000 LB. ALUMINUM TRAILERS. ALSO FITS 4,600-8,000 LB. STEEL TRAILERS. MOUNTS TO THE REAR CROSS MEMBER BETWEEN THE CROSS TUBE AND THE ROLLER OR BUNK MOUNTING ARMS. USE EXISTING U-BOLTS ON THE TRAILER TO ATTACH THE SS1212 WLEDMENTS

SS1403 FRONT KEEL GUIDER RISER KTI. INCLUDES TAPERED SHIMS FOR THE CROSS MEMBER. USED WHEN RAISING THE FRONT KEEL ROLLER CRADLE 3/4" ON ALL 2X4 AND 2X5 FRAMES, LE AND ALUMINUM RB AND ROLLER TRAILERS. NOT TO BE USED WITH V-FRAMES AND XR MODELS. THE SS1403 COMBIN

SSG2RR GALVANIZED 2" REAR RISER KIT. OBSOLETE. FITS 2X5" FRAMES IN THE STANDARD LINE, LE, AND 4600 LB. ALUMINUM TRAILERS. ALLOWS YOU TO RAISE THE REAR BUNKS 2" FOR ADDITIONAL FENDER CLEARANCE. INCLUDES ATTACHING HARDWARE.

SSG2RR 2X5 GALVANIZED 2" REAR RISER KIT. FITS 2X5" STANDARD FRAMES, LE AND 4600 LB. ALUMINUM TRAILERS. ALLOWS YOU TO RAISE THE REAR ROLLER RACKS 2" FOR ADDITIONAL FENDER CLEARANCE. INCLUDES ATTACHING HARDWARE.

SSG3RR GALVANIZED 3" REAR RISER KIT. OBSOLETE. FITS 2X5" FRAMES, LE AND 4600 LB. ALUMINUM TRAILERS. ALLOWS YOU TO RAISE THE REAR BUNKS 3" FOR ADDITIONAL FENDER CLEARANCE. INCLUDES ATTACHING HARDWARE.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 39 20080729

Dealer Reference Guide

Part Number: Description:Risers

SSG3RR 2X5 GALVANIZED 3" REAR RISER KIT. FITS 2X5" STANDARD FRAMES, LE, AND 4600LB. ALUMINUM TRAILERS. ALLOWS YOU TO RAISE THE REAR ROLLER RACKS 3" FOR ADDITIONAL FENDER CLEARANCE. INCLUDES ATTACHING HARDWARE.

Part Number: Description:Spare Tire

TA0028 SPARE TIRE KIT FOR 2X4 & 2X5 FRAMES. BRACKET MOUNTS ON THE SIDE FRAME OF TRAILER. HAS 5-BOLTS ON 4.5" BOLT CIRCLE RIM PATTERN. SPECIFY COLOR WHEN ORDERING.

Part Number: Description:Support

SK0012 2x6x10" BUNK HULL STABILIZER ASSEMBLY USED ON ROLLER AND ROLLER BUNK SERIES 2 X 4 AND 2 X 5 SIDE FRAME TRAILERS.

SK0014 BUNK BRACKET WITH MOUNTING HARDWARE FOR 2 X 3 TUBE CROSS MEMBERS.

SK0015 PLASTIC CUSHION PAD ASSEMBLY USED ON 2 X 3 CROSS MEMBERS. ALSO USED ON AXLES. HAS 3 3/4" CENTER MOUNTING BOLT.

SK0041 MOLDED 15" REAR PIVOT PAD, FORMED IN A V-SHAPE TO CONFORM TO THE BENT CROSS MEMBER. INCLUDES THE MOUNTING HARDWARE.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 40 20080729

Dealer Reference Guide

Part Number: Description:Support

SK0043 BUNK BRACKET (60850) AND MOUNTING HARDWARE TO ATTACH TO A 3X3 TUBE.

SK0051 MOLDED CROSS MEMBER PAD FOR THE FLAT 3X3 CROSS MEMBERS. INCLUDES THE MOUNTING HARDWARE.

SK0118 5" ROLLER REPLACMENT KIT. INLCUDES ROLLER HUB, WASHERS AND HOG RING.

SK0218 ONE ONLY GALV. BUNK BRKT, COMPLETE WITH SCREWS AND MOUNTING HARDWARE FOR 2X6" CARPETED BUNK.

SS1165 PAINTED REAR RB BUNK KIT. FOR PAINTED 2X5" FRAMES.REPLACES THE REAR ROLLER RACK ON A ROLLER TRAILER. CONSISTS OF TWO- 2X6" X 89" CARPETED BUNKS AND SUPPORTING HARDWARE.

SS1217 MOLDED CROSS MEMBER PAD FORMED FOR 3X3 V CROSS MEMBERS COMES WITH MOUNTING HARDWARE.

SSBK1165 REAR BUNK KIT 2X5

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 41 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

4510645 INNER SLIDE ASSEMBLY FOR GDC120 AND GDC80 - ACTUATORS 4510354 AND 4510353 UFP.8000/10000 LBS.

4510646 REPLACEMENT SLIDE BEARING FOR THE NEW GDC120 AND GDC80 ACTUATORS.

4510648 REPLACEMENT BREAKAWAY CABLE FOR GDC120 AND GDC80 ACTUATORS.

4510649 REPLACEMENT RESERVOIR CAP FOR GDC120 AND GDC80 ACTUATORS.

4510650 REPLACEMENT PIN FOR UFP GDC120 AND GDC80 ACTUATOR.

4510651 REPLACEMENT STOP/RETAINING RING FOR UFP GDC120 AND GDC80 ACTUATORS.

4510652 REPLACEMENT SHOCK ABSORBER FOR THE UFP GDC120 AND GDC80 ACTUATORS.

4510653 REPLACEMENT MASTER CYLINDER FOR THE GDC120 AND GDC80 UFP ACTUATORS.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 42 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

SK0001 2" CLASS II COUPLER WITH MOUNTING HARDWARE. FITS TRAILERS WITH A CARRYING CAPACITY UP TO 2400 LB. TOTAL GROSS VEHICLE WEIGHT NOT TO EXCEED 3500 LB.

SK0002 1/4 X 20 LINK SAFETY CHAIN (PART NO. 2201300). TO BE USED ON TRAILERS WITH A GVWR NOT GREATER THAN 5,000 LB. KIT INCLUDES TWO CHAINS AND ATTACHING HARDWARE.

SK0192 SAFETY CHAINS W/SAFETY LATCH HOOKS. COMPLETE WITH ATTACHING HARDWARE. TO BE USED ON ACTUATORS WITH A CAPACITY RATING UP THROUGH 8,000 LB.

SK0226 INNER PORTION OF UFP DISC BRAKE ACTUATOR. SAME AS PART NO.3991014. FITS ALL UFP ACTUATOR HOUSINGS UP TO 8,000 LB. GVWR

SK0227 REPLACEMENT MOLDED PLASTIC CAP FOR UFP ACTUATOR OUTER HOUSING

SS1037 BRAKELINE KIT FOR SWINGTONGUE. INCLUDES THE LINES, 18" HOSE AND COUPLING COMPLETE TO RUN A BRAKE LINE INSIDE A SWING TONGUE..

TA0040 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 55 INCHES LONG WITH A DISC BRAKE ACTUATOR,FLAT 5 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 BRAKE MODELS.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 43 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

TA0041 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 55 INCHES LONG INCLUDES A 4 PRONG HARNESS WITH GROMMET.FITS 2X4 FRAME 2300 LBS UP TO 2400 LB AND ALUMINUM 2000 LBS TO 2400 LB NON BRAKE TRAILERS.COUPLER AND HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0042 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 65 INCHES LONG WITH A DISC BRAKE ACTUATOR,FLAT 5 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 BRAKE MODELS.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0043 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 65 INCHES LONG INCLUDES A 4 PRONG HARNESS WITH GROMMET.FOR 2X4 FRAME 2300 LBS UP TO 2400 LB AND ALUMINUM 2000 LBS TO 2400 LB NON BRAKE TRAILERS.COUPLER AND HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0044 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 78 INCHES LONG WITH A DISC BRAKE ACTUATOR,FLAT 5 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 BRAKE MODELS.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0045 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 78 INCHES LONG INCLUDES A 4 PRONG HARNESS WITH GROMMET.FOR 2X4 FRAME 2300 LBS UP TO 2400 LB AND ALUMINUM 2000 LBS TO 2400 LB NON BRAKE TRAILERS.COUPLER AND HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0050 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 55 INCHES LONG WITH NO BRAKE ACTUATOR.COMES WITH A FLAT 5 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 BRAKE MODELS.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 44 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

TA0051 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 55 INCHES LONG WITH A DRUM BRAKE ACTUATOR,FLAT 4 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 WITH DRUM BRAKES.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0052 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 65 INCHES LONG WITH NO BRAKE BRAKE ACTUATOR,FLAT 5 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 BRAKE MODELS.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0053 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 65 INCHES LONG WITH A DRUM BRAKE ACTUATOR,FLAT 4 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 WITH DRUM BRAKES.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0054 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 78 INCHES LONG WITH NO BRAKE BRAKE ACTUATOR,FLAT 5 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 BRAKE MODELS.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0055 SWINGTONGUE ASSEMBLY 3" X 5" TONGUE 78 INCHES LONG WITH A DRUM BRAKE ACTUATOR,FLAT 4 PRONG HARNESS AND BRAKE LINE.FITS 2X4 FRAME 2300 LBS UP 4000 LB AND 4600LB 2X5 WITH DRUM BRAKES.HARDWARE TO MOUNT TONGUE TO TRAILER NOT INCLUDED.

TA0065 STRAIGHT TONGUE WITHOUT THE DISC BRAKE ACTUATOR,STEEL 3X5"X 55" LONG TUBING, INCLUDES FLAT FIVE WIRE HARNESS TO OPERATE THE TRAILER LIGHTS AND THE REVERSING SOLENOID.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 45 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

TA0066 STRAIGHT TONGUE ASSEMBLY WITHOUT COUPLER. STEEL 3X5" X 55" LONG TUBING.INCLUDES A FLAT FIVE WIRE HARNESS TO OPERATE THE TRAILER LIGHTS AND REVERSING SOLENOID.

TA0067 55" STRAIGHT TONGUE ASSEMBLY WITH DISC BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FIVE WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS AND REVERSING SOLENOID.

TA0068 55" STRAIGHT TONGUE ASSEMBLY WITH DRUM BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FOUR WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS.

TA0069 65" STRAIGHT TONGUE ASSEMBLY WITHOUT THE BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FIVE WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS AND REVERSING SOLENOID.

TA0070 65" STRAIGHT TONGUE ASSEMBLY WITHOUT COUPLER. STEEL 3X5" TONGUE TUBING, INCLUDES A FLAT FOUR WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS.

TA0071 65" STRAIGHT TONGUE ASSEMBLY WITH DISC BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FIVE WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS AND THE REVERSING SOLENOID.

TA0072 65" STRAIGHT TONGUE ASSEMBLY WITH DRUM BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FOUR WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 46 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

TA0073 78" STRAIGHT TONGUE WITHOUT COUPLER. STEEL 3X5" TUBING, INCLUDES Straight Tongue assembly without coupler. INCLUDES A FLAT FOUR WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS.

TA0074 78" STRAIGHT TONGUE ASSEMBLY WITHOUT THE DISC BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FIVE WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS AND REVERSING SOLENOID.

TA0075 78" STRAIGHT TONGUE ASSEMBLY WITH THE DISC BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FIVE WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS AND REVERSING SOLENOID.

TA0076 78" STRAIGHT TONGUE ASSEMBLY WITH DRUM BRAKE ACTUATOR. STEEL 3X5" TONGUE TUBING, INCLUDES THE TONGUE BRAKE LINES AND A FLAT FOUR WIRE HARNESS FOR OPERATING THE TRAILER LIGHTS.

TA0077 87" DROP TONGUE FOR 2X5 FRAMES. DRILLED TO ACCEPT THE UFP ACTUATOR. INCLUDES THE TONGUE BRAKE LINE AND THE FLAT FIVE TONGUE WIRE HARNESS TO OPERATE THE TRAILER LIGHTS AND REVERSING SOLENOID. ALSO INCLUDES THE TWO FRONT SIDE MARKER LIGHTS.

TA0079 63" DROP TONGUE FOR 2X5 FRAMES. DRILLED TO ACCEPT THE UFP ACTUATOR. INCLUDES THE TONGUE BRAKE LINE AND THE FLAT FIVE TONGUE WIRE HARNESS TO OPERATE THE TRAILER LIGHTS AND REVERSING SOLENOID. ALSO INCLUDES THE TWO FRONT SIDE MARKER LIGHTS.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 47 20080729

Dealer Reference Guide

Part Number: Description:Tongue/Coupler

TA0123 24IN WHITE GROUND WIRE THAT ATTACHES TO THE SOLENOID OF THE DISC DRAKE ACTUATOR WITH A #8 MACHINE SCREW AND WIRED INTO THE TONGUE HARNESS WITH A WIRING SPLICE CONNECTOR. THIS PROVIDES A BETTER GROUNDING AFFECT TO OPERATE THE SOLENOID. IF YOU HAVE THE NEW

Part Number: Description:Winch

4510647 REPLACEMENT SLIDE BEARING FOR THE OLD GDC120 AND GDC80 ACTAUTORS.

6294A REPLACEMENT WINCH RACHET PAW. KIT INCLUDES NUT, BOLT, BUSHING, SPACER SLEEVE AND RACHET PAW.

SK0195 4" BOW ROLLER ASSEMBLY COMPLETE WITH END CAP ROLLERS. INCLUDES ALL PLATED ATTACHING HARDWARE. USED ON THE PROFILE 2000 WINCH CASE.BOW ROLLER

TA0023 60" LONG WINCH POST WITH BLACK PLASTIC CAP. 3 X 4 TUBE CONSTRUCTION. USED FOR BOATS WITH HIGH BOW EYES.

TA0991 9" WINCH STAND KIT W/MTG HDWE. USED WITH THE PROFILE 2000 WINCH CASE. HAS A FORMED MOUNTING LOCATION FOR THE JACK.ALSO INCLUDES THE JACK MOUNTING HARDWARE.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 48 20080729

Dealer Reference Guide

Part Number: Description:Winch

TA0992 14" WINCH STAND KIT W/MTG HDWE. USED WITH THE PROFILE 2000 WINCH CASE. HAS A FORMED MOUNTING LOCATION FOR THE JACK.ALSO INCLUDES THE JACK MOUNTING HARDWARE.

TA0993 7" WINCH STAND KIT W/MTG HDWE. USED WITH THE PROFILE 2000 WINCH CASE. HAS A FORMED MOUNTING LOCATION FOR THE JACK.ALSO INCLUDES THE JACK MOUNTING HARDWARE.

Models and specifications are subject to change. Some trailers are shown with optional equipment.Recommended carrying capacity is based on shipping weight of the trailer with standard equipment. Adding optional equipment may decrease the trailer carrying capacity.

Section: ShoreLand'r - LE Page 49 20080729

Trailer Dealer Book PagesLE SL Trailers TOC.pdfDealer Book Page TOC