DCS System Distributed Redundant System Solutions Training/Tutorial

Industrial Computer Product Data Acquisition System

DCS I/O SolutionsDCS I/O Solutions


ICP DAS DCS I/O SolutioniDCS-8830

Redundancy System


• Distributed Redundant System• ICP DAS DCS Solution• iDCS-8830 Introduction• iDCS-8830 Application Structure• iDCS-8830 Application Story

Agenda


Distributed Redundant System (1/3)• Integrated with computing, communication, control,

monitor etc. technique and widely applied by petrochemical factory.

• Dispersed or reduce the risk of automation, improve equipment reliability.

• Capture Various Signal (Digital I/O, Analog I/O, HART, Pulse, Temperature, …)

• Fast I/O Redundant Time• Fast I/O Data Exchange• Real-Time Control• Self-Error Detection• Suitable for Harsh Environments


Distributed Redundant System (2/3)


Distributed Redundant System (3/3)


ICP DAS DCS Solution (1/2)

• Host Software :EZ Data Logger,eLogger / InduSoft, NAPOPC Server …

• DCS Controller :WinPAC / ViewPAC / XPAC / LinPAC / iDCS-PAC / iPAC …

• I/O Module : I-7K / I-8K / I-87K / ET-7K / USB-87K / PROFI-8K /

CAN-2K / iDCS-8830 …

Click here to learn more…

http://www.icpdas-usa.com/ez_data_logger.html?r=slideshare

http://www.icpdas-usa.com/?r=slideshare


• Single/Redundant Controller• Development Tools - SoftPLC...• Support Various OS

Windows CE

MiniOS 7 (DOS)

Embedded Linux Android 、 BSD etc..

ICP DAS DCS Solution (2/2)

Learn More…

http://www.icpdas-usa.com/idcs_8830.html?r=slideshare


• Remote I/O Redundant System• Equip Redundant Power Modules• Equip Redundant Communication Modules (with MB/TCP Server)• Equip eight I/O module slots - Max. 256 digital I/O channels - Max. 64 Analog Output channels - Max. 128 Analog Input channels - Max. 64 Pulse I/O channels• Four sets of I/O Redundant• Hardware Features : - Operation Temp. : -25 ~ +75 ℃ - ESD : 8KV - G3 Standard (ISA S71.04)

iDCS-8830 Introduction

Click here to learn more



iDCS-8830 Feature (1/2)• An Ethernet Remote I/O Unit with

Modbus TCP Server.• Expand to max. 255 stations.• Equip Redundant Communication

Modules to upgrade System Reliability.

• Equip Self-Error Detection Function.

• Fast I/O data exchange with host application.




• I/O Update Time :– 3 ms for data exchange between controller and I/O modules.

(256 Channels DO/DI)。• I/O Redundant Time :

– Seamless

• I/O Data Accuracy :– Analog I/O Accuracy : +/- 0.1% of FSR and Even better– Pulse Input Accuracy : Error less than one pulse in 10KHz

• I/O Exclusive Daughter Board• I/O Self-Error Detection :

– With terminal off detection function.– With Disconnection detection function.

iDCS-8830 Feature (2/2)




iDCS-8830 Maintenance

• Hot Swap– Auto Configuration When New Module is Installed.– Seamless with Power / Communication / IO modules.

• Easy Wiring– I/O Cable Plug & Play

• Intuitive Configuration– Provide Software Utility




Update Setting to new IOM.

iDCS-8830 HotSwap

iDCS-8830Traditional

I/O LAN I/O LAN

Control LANControl

LAN

Shutdown controller for IOM replace.

Without any action for IOM replace.


iDCS-8830 Wiring

Simple Wiring

MessyWiring


iDCS-8830 I/O Modules


iDCS-8830 I/O TableI/O Type Model Ch Features

Digital DI F-8040 32LED Display, 5 ～ 30V

DO F-8041 32

PO F-8041P 16 PWM / One-Shot / Continue Mode

Analog AII F-8017C1 8 4~20mA Input, S.E./Diff., 24VDC Output

F-8017C2 16 4~20mA Input, Diff.

F-8017CH 8 4~20mA Input with HART, S.E./Diff., 24VDC Output,

AOI F-8028CV 8 Voltage / Current Output

F-8028CH 8 4~20mA Output with HART

AIV F-8017V 8 Voltage Input, Diff.

RTD F-8015 8 Type: Pt100, Pt1000, Jpt100.. (3-wire)

TC F-8019 8 Type: J,K,T,E,R,S,N,B,C..

Pulse PI F-8084 8 FrequencyCounter (Up, Dir/Pulse, A/B-Phase, Up/Down)


Digital Module

DN-DO-16DR-A

DN-DO-16DR-B

DN-DO-16FRW-A

DN-DO-16FRW-B

DN-DI-32F

[ I/O Feature ]1. Single/Redundant2. 32ch LED Display3. DO with PWM

[ Daughter Board ]1. Relay(6A,250VAC) 、 Fuse2. DO supports Dry/Wet contact3. DI with fuse 、 EMS protection4. With Ch LED Display


Analog Module

[ I/O Feature ]1. Single/Redundant2. Fast I/O Data Rate

[ Daughter Board ]1. With fuse 、 EMS protection

DN-AIO-08F DN-AIO-16F




Temp. & Pulse Module

[ I/O Feature ]1. Single/Redundant2. RTD supports 3-wire3. Pulse Redundant error

less than one count4.TC supports multi-type

[ Daughter Board ]1. DN-TC-08 supports

CJC

DN-RTD-16DN-TC-08


RealTime I/O Redundant

• I/O Redundant Time– How to prove?– How many time does I/O take over?

• Test Method– Remove module by hand.– Switch Command from utility.

• Test Result– I/O Seamless Redundant!


Application Structure ( 一 )High-Reliability PLC System


Application Structure ( 二 )Controller Redundant System


Application StructureDistributed Redundant Application Ethernet

Redundant

Controller Redundant

I/O Redundant


iDCS-8830 On-site Installation


Questions?

Making Data Acquisition Easy

• Please ask any questions you may have.• Contact us:Tel: +1 (310) 517-9888 +1 888-971-9888Website: http://www.icpdas-usa.comEmail: [email protected] Follow ICP DAS USA On:

Stay up-to-date with the latest technology in automation and control!

Ladder Logic and Touch Screen PLC Programming Training | 8/28/2015

DCS System Distributed Redundant System Solutions Training/Tutorial

Technology

Transcript of DCS System Distributed Redundant System Solutions Training/Tutorial