Kopparkabel för installation av tele, data, signal och larm | Hexatronic - HCI
DCIO – Intelligent Data Center Solutions | Hexatronic - HED
-
Upload
hexatronic -
Category
Documents
-
view
223 -
download
1
description
Transcript of DCIO – Intelligent Data Center Solutions | Hexatronic - HED
Intelligent Data Center Solutions
Intelligent Data Center Solutions
Tomorrow’s Data Centers are Already Here, Cost-effective and Climate Friendly
Data centers are a long-term investment for the future. Our quality solutions are based upon a smart modular system that is integrated into a larger overall application and can be added to and adapted easily. Hexatronic’s modular cabinets extract the hot air from server entries, which reduces the need to provide cool air, preventing overheating of important and often expensive equip-ment. This ensures highly effective energy handling, for power and cost efficiency – for years to come.
Hexatronic data center solutions offer guaranteed power systems and protection of equipment for ultimate reliability.
The advanced power distribution systems presented in this catalogue offer new possibilities for monitoring operating status and power distribution in data centers. Monitoring can be set to different levels; rooms, cabinets, or by the single socket.
For a wider selection of data center solutions from Hexatronic please visit www.hexatronic.se or find more material at issuu.hexatronicpartners.se.
Contact Hexatronic sales support on:+46 (0)31 742 53 30, [email protected]
ONLINE CATALOGUE
For the digital catalogue and more information about our products and services, please visit hexatronic.seHexatronic’s catalogues are also available online at issuu: issuu.hexatronicpartners.se
3
CONTENTS
Cabinets
4DC Series – Floor Standing Server Cabinets .......................... 6
Door Options ..................................................................................7
WEST Series – Floor Standing Server Cabinets ....................... 8
Door Options ..................................................................................9
STANDARD Series – Floor Standing IT Cabinets .................... 10
Co-Location Series – Floor Standing CoLo Cabinets ............. 11
Modular Equipment
4DC Cabinet Accessories ....................................................... 12
Doors for modular cabinets ..........................................................12
Modular roofs ...............................................................................12
Rear walls for 4DC modular cabinets ...........................................13
Base ..............................................................................................13
Cover for cabinets with a width of 800 mm ..................................14
Cover for cabinets with a width of 600 mm ..................................14
Upper and lower air duct cover ....................................................14
Vertical cable organiser for cabinets .............................................15
Blank panel - tool-free mounting ..................................................15
Vertical cable ladder .....................................................................15
Horizontal cable ladder ................................................................16
Holders for power strips ...............................................................16
Cabinet base ................................................................................16
Cabinet joining set .......................................................................17
Mounting section ..........................................................................17
Central mounting section .............................................................17
19” Cabinets Accessories ....................................................... 18
Pullout 1U Shelves Fixed on Four 19” Mounting Profiles .............18
Shelf 2U/19” .................................................................................18
Shelf 2U Fixed on Two 19” Mounting Profiles ..............................18
Heavy-duty Depth Adjustable Shelves 1U/19” ............................19
Adjustable Shelves 1U Fixed on Four 19” Mounting Profiles ......19
Counter Balance for Server Cabinet .............................................19
Sliding Rails for Heavy-duty Equipment .......................................20
Heavy-duty Castor Set ..................................................................20
Plinth for Server Cabinets with Tip Over Protection .....................20
Plinth for Network Cabinets .........................................................21
Blank panel - tool-free mounting ..................................................21
Brush Terminal ..............................................................................22
Vertical Cable Management Panel ...............................................22
Optional - organizer with additional side holders ........................22
Cable Management 19” ...............................................................23
Cable Management Panel 19” .....................................................23
Horizontal Cable Routing Panels ..................................................23
Cable Routing Bracket ..................................................................24
Cable Rails ....................................................................................24
Perforated Plate ............................................................................24
Drawer for Cables .........................................................................25
Lockable Keybord Drawer 2U/19” ...............................................25
Lighting Unit 19”/1U ....................................................................25
Cabinet Fans .................................................................................26
Filter Panel ....................................................................................26
Complete Grounding Set .............................................................27
Line-up Bolts .................................................................................27
Underfloor Mounting Kit 19” .......................................................27
Rack 19” ......................................................................................28
Power Distrubution Units – PDU
Power Distribution and Monitoring Systems ........................ 29
PDU 19” SCH (Schuko) -xx ...........................................................30
PDU 19” C13 -xx ..........................................................................30
PDU VE (Vertical) -xx .....................................................................30
PDU VE (Vertical) SNMP -xx ..........................................................31
PDU HO (Horizontal) -xx ...............................................................31
PDU HO (horizontal) SNMP -xx ....................................................31
Fiber Optic SystemsFiber – MTP/MPO Solution ..........................................................32
ODF ..............................................................................................32
MTP/MPO Cables .........................................................................33
4
Intelligent Data Center Solutions for Networks of the Future
CabinetsHigh quality, functional cabinet solutions developed for holding active and passive network equipment in 10”, 19” and 21” standard indoor applications. The product offering includes advanced cooling solutions and remote management and power systems.
Hexatronic’s reliable, high quality data center solutions with advanced cooling technology, reduce the risk of failures and extend functionality of components. Cooling modules and cabinets reduce the risk of failures, improve performance and extend equipment lifetime.
• Energy and cost efficient
• Environmentally friendly
• Total protection of equipment
• Guaranteed power system for ultimate reliability
5
Fiber Optic SystemThe product range includes pigtails, patchcords, splitters, splice cassettes and protectors, pre terminated cables, outdoor and universal cables.
Modular Equipment and Accessories A complete range of fans, shelves, panels, plates, brackets, lighting, castors, plinths, mounting brackets and more.
Power Distribution Units (PDU)The modular multi-purpose power distribution units are designed for use in 19” cabinets and consist of power socket modules, controlled function modules, protecting function mod-ules and surge protection modules.
6
CABINETS
4DC SERIES – FLOOR STANDING SERVER CABINETS4DC cabinets are an ideal solution for demanding data centres where functionality, ease of installation and safety play a key role. They are designed to meet the needs and requirements of the most demanding operations, with high quality and a modern design. The 4DC cabinet has all the characteristics of the top quality product.
Stability • Cabinet frame with a weight capacity of 1500 kg
• Possibility of mounting castors with built in leveling feet and weight capacity of 1000 kg
Features• Material: steel sheet
• Load capacity: 1500 kg
• IP rating: 20
• Color: black RAL 9005
• Cable inlet available from either top or bottom
• Wide range of supplementary accessories
• Perforation 82%
• Available with electronic locks
Maximum Spacing of Mounting Sections Depending on Cabinet Depth:• Cabinets with a depth of 1000 mm - maximum spacing: 872 mm
• Cabinets with a depth of 1200 mm - maximum spacing: 1072 mm
Regulatory Compliance:EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS
Included in Delivery:• Brush strip
• Set of M6 assembly bolts (16 pcs)
• Set of floor-leveller feet
• 1,5 m edge sealing
• 2 pairs of mounting profiles
Easy Installation• Tool-free mounting of side walls
• Tool-free mounting/demounting of doors
• Tool-free mounting of 19’’ rails
• Tool-free configuration of the base
Safety• Universal closing system with possibility of
utilizing electromagnetic locks
• Hinges mounted internally
• 4-point lock as standard
Airflow• Doors with optimal perforated surface of
82% for more efficient cooling while maintaining appropriate stability
• Additional elements ensuring appropriate closing off of cold/hot areas in cabinet
Flexibility• Suitable for mounting PDUs without interfer-
ing in the 19’’ area (even in 600 mm wide cabinets)
• Possibility of mounting 19” rails asymmetri-cally as standard (800 mm wide cabinets)
• 19’’ or 21’’ rail spacing when utilizing standard rails in 800 mm wide cabinets
7
ordering information 4dC series, standard Configurations (all dimensions below in millimeter)Product No. Product Description Type Width Depth Height
19000 4DC, perforated front and rear doors (identical) 42U 600 1000 1980
19001 4DC, perforated front and rear doors (identical) 42U 600 1200 1980
19002 4DC, perforated front and rear doors (identical) 42U 800 1000 1980
19003 4DC, perforated front and rear doors (identical) 42U 800 1200 1980
19004 4DC, perforated front and rear doors (identical) 45U 600 1000 2120
19005 4DC, perforated front and rear doors (identical) 45U 600 1200 2120
19006 4DC, perforated front and rear doors (identical) 45U 800 1000 2120
19007 4DC, perforated front and rear doors (identical) 45U 800 1200 2120
19008 4DC, perforated front and rear doors (identical) 47U 600 1000 2190
19009 4DC, perforated front and rear doors (identical) 47U 600 1200 2190
19010 4DC, perforated front and rear doors (identical) 47U 800 1000 2190
19011 4DC, perforated front and rear doors (identical) 47U 800 1200 2190
19012 4DC, perforated front door and two-winged perforated rear doors 42U 600 1000 1980
19013 4DC, perforated front door and two-winged perforated rear doors 42U 600 1200 1980
19014 4DC, perforated front door and two-winged perforated rear doors 42U 800 1000 1980
19015 4DC, perforated front door and two-winged perforated rear doors 42U 800 1200 1980
19016 4DC, perforated front door and two-winged perforated rear doors 45U 600 1000 2120
19017 4DC, perforated front door and two-winged perforated rear doors 45U 600 1200 2120
19018 4DC, perforated front door and two-winged perforated rear doors 45U 800 1000 2120
19019 4DC, perforated front door and two-winged perforated rear doors 45U 800 1200 2120
19020 4DC, perforated front door and two-winged perforated rear doors 47U 600 1000 2190
19021 4DC, perforated front door and two-winged perforated rear doors 47U 600 1200 2190
19022 4DC, perforated front door and two-winged perforated rear doors 47U 800 1000 2190
19023 4DC, perforated front door and two-winged perforated rear doors 47U 800 1200 2190
Other configurations available on request
Door OptionsAvailable options for doors designed for the 4DC cabinets.
Perforated Two-piece, perforated
43 34
3 4
8
WEST SERIES – FLOOR STANDING SERVER CABINETSSimple design combined with high quality and functionality makes the cabinet very user-friendly. Latest technology employed in production results in the optimum parameters of stiffness, airiness (80%) or load capacity (1000 kg). Cabinets come with welded or modular versions. The wide type range of the cabinets and numerous accessories allow for any given configuration.
Easy Cable Organization• Additional side cable entries in
base and roof allow for perfect organization of cabling outside the 19’’ area (in 800 mm wide cabinets)
Airflow• Perforated mesh with 80%
airflow ensuring optimum air exchange in the cabinet
Secure Locking• Door protected with 3-point
locking system ensuring equipment safety
Stability • Frame and mounting sections
structure with a load capacity of 1000 kg as a standard
Features• Material: steel sheet
• Load capacity: 1000 kg
• IP rating: 20
• Color: light grey RAL 7035 or black RAL 7021
• Cable inlet available from either top or bottom
• Wide range of supplementary accessories
• Perforation 80%
• Available with electronic locks
Maximum Spacing of Mounting Sections Depending on Cabinet Depth:• cabinets with a depth of 1000 mm - maximum spacing: 872 mm
• cabinets with a depth of 1200 mm - maximum spacing: 1072 mm
Regulatory Compliance:• EIA-310-D, IEC 60297-1, IEC 60297-2, ROHS
Included in Delivery:• Brush strip
• Set of M6 assembly bolts (16 pcs)
• Set of floor - leveller feet
• 1,5 m edge sealing
• 2 pairs of mounting profiles
9
ordering information west series, standard Configurations (all dimensions below in millimeter)Product No. Grey Product No. Black Product Description Type Width Depth Height
19024 19025 WEST - Perforated front door and perforated rear door (identical) 42U 600 1000 1980
19026 19027 WEST - Perforated front door and perforated rear door (identical) 42U 600 1200 1980
19028 19029 WEST - Perforated front door and perforated rear door (identical) 42U 800 1000 1980
19030 19031 WEST - Perforated front door and perforated rear door (identical) 42U 800 1200 1980
19032 19033 WEST - Perforated front door and perforated rear door (identical) 45U 600 1000 2120
19034 19035 WEST - Perforated front door and perforated rear door (identical) 45U 600 1200 2120
19036 19037 WEST - Perforated front door and perforated rear door (identical) 45U 800 1000 2120
19038 19039 WEST - Perforated front door and perforated rear door (identical) 45U 800 1200 2120
19040 19041 WEST - Perforated front door and perforated rear door (identical) 47U 600 1000 2186
19042 19043 WEST - Perforated front door and perforated rear door (identical) 47U 600 1200 2186
19044 19045 WEST - Perforated front door and perforated rear door (identical) 47U 800 1000 2186
19046 19047 WEST - Perforated front door and perforated rear door (identical) 47U 800 1000 2186
19048 19049 WEST - Perforated front door and two-winged perforated rear doors 42U 600 1000 1980
19050 19051 WEST - Perforated front door and two-winged perforated rear doors 42U 600 1200 1980
19052 19053 WEST - Perforated front door and two-winged perforated rear doors 42U 800 1000 1980
19054 19055 WEST - Perforated front door and two-winged perforated rear doors 42U 800 1200 1980
19056 19057 WEST - Perforated front door and two-winged perforated rear doors 45U 600 1000 2120
19058 19059 WEST - Perforated front door and two-winged perforated rear doors 45U 600 1200 2120
19060 19061 WEST - Perforated front door and two-winged perforated rear doors 45U 800 1000 2120
19062 19063 WEST - Perforated front door and two-winged perforated rear doors 45U 800 1200 2120
19064 19065 WEST - Perforated front door and two-winged perforated rear doorsl 47U 600 1000 2186
19066 19067 WEST - Perforated front door and two-winged perforated rear doors 47U 600 1200 2186
19068 19069 WEST - Perforated front door and two-winged perforated rear doors 47U 800 1000 2186
19070 19071 WEST - Perforated front door and two-winged perforated rear doors 47U 800 1000 2186
Other configurations available on request
Door OptionsAvailable options for doors designed for the West cabinets.
21 43 5 6 7
Glazing only Sheet metal, glazing
Perforated Two-piece, perforated
Rear wall, shortened, perforated
Rear wall, shortened, metal
Sheet metal only
10
STANDARD SERIES – FLOOR STANDING IT CABINETSBasic version ensures optimum installation and configuration. Welded structure ensures safety of use even at maximum load. Used primarily as a network cabinet/distribution point.
Features• Cable inlet available from either top or bottom
• Wide range of supplementary accessories
• Load capacity: 600 kg
• Color: Light grey RAL 7035
• Cabinets available from heights 15U
• Available with electronic locks
Maximum Spacing of Mounting Sections Depending on Cabinet Depth:• Cabinets with a depth of 600 mm – maximum spacing: 472 mm
• Cabinets with a depth of 800 mm – maximum spacing: 672 mm
ordering information standard series, standard Configurations (all dimensions below in millimeter)Product No. Grey Product Desciption Type Width Depth Height
19072 STANDARD, perforated front and rear doors (identical) 42U 600 600 1980
19073 STANDARD, perforated front and rear doors (identical) 42U 600 800 1980
19074 STANDARD, perforated front and rear doors (identical) 42U 800 600 1980
19075 STANDARD, perforated front and rear doors (identical) 42U 800 800 1980
19076 STANDARD, perforated front and rear doors (identical) 45U 600 600 2120
19077 STANDARD, perforated front and rear doors (identical) 45U 600 800 2120
19078 STANDARD, perforated front and rear doors (identical) 45U 800 600 2120
19079 STANDARD, perforated front and rear doors (identical) 45U 800 800 2120
19080 STANDARD, perforated front and rear doors (identical) 47U 600 600 2186
19081 STANDARD, perforated front and rear doors (identical) 47U 600 800 2186
19082 STANDARD, perforated front and rear doors (identical) 47U 800 600 2186
19083 STANDARD, perforated front and rear doors (identical) 47U 800 800 2186
19084 STANDARD, perforated front door and two-winged perforated rear doors 42U 600 600 1980
19085 STANDARD, perforated front door and two-winged perforated rear doors 42U 600 800 1980
19086 STANDARD, perforated front door and two-winged perforated rear doors 42U 800 600 1980
19087 STANDARD, perforated front door and two-winged perforated rear doors 42U 800 800 1980
19088 STANDARD, perforated front door and two-winged perforated rear doors 45U 600 600 2120
19089 STANDARD, perforated front door and two-winged perforated rear doors 45U 600 800 2120
19090 STANDARD, perforated front door and two-winged perforated rear doors 45U 800 600 2120
19091 STANDARD, perforated front door and two-winged perforated rear doors 45U 800 800 2120
19092 STANDARD, perforated front door and two-winged perforated rear doors 47U 600 600 2186
19093 STANDARD, perforated front door and two-winged perforated rear doors 47U 600 800 2186
19094 STANDARD, perforated front door and two-winged perforated rear doors 47U 800 600 2186
19095 STANDARD, perforated front door and two-winged perforated rear doors 47U 800 800 2186
Other configurations available on request
11
CO-LOCATION SERIES – FLOOR STANDING COLO CABINETS Standard 19” Co-Location cabinets for 2, 3 or 4 separate compartments with doors and side panels.
ELECTRONIC LOCK
Features• Material: Steel sheet
• Load capacity: 1000 kg
• IP rating: 20
• Cable inlet available from either top or bottom
• Wide range of supplementary accessories
• Color: Light grey RAL 7035
• Performation 80%
• Separate openings for cable entry for each section
• Available with electronic locks
On request, we can equip our server cabinets with a variety of electronic locks for example pin Code or RFID access.
ordering information Co-loCation series, standard Configurations (all dimensions below in millimeter)Product No. Product Desciption Type Width Depth Height
19096 Co-Location 2 x 23U, perforated front and rear doors (2-part) 46U 600 1000 2100
19097 Co-Location 4 x 11U, perforated front and rear doors (4-part) 44U 600 1000 2100
Other configurations available on request
12
MODULAR EQUIPMENT
4DC CABINET ACCESSORIES
ordering information
Product No. Product Desciption Type Width (mm) Depth (mm) Height (mm)
19098 Mechanical doors 4DC 42U 1200 70 2100
19099 Mechanical doors 4DC 45U 1200 70 2240
19100 Mechanical doors 4DC 47U 1200 70 2310
19101 Automatic doors 4DC 42U 42U 1200 70 2100
19102 Automatic doors 4DC 42U 45U 1200 70 2240
19103 Automatic doors 4DC 42U 47U 1200 70 2310
ordering information
Product No. Product Desciption Width (mm) Depth (mm) Height (mm)
19104 Modular roof 4DC 600 mm 1200 600 20
19105 Modular roof 4DC 800 mm 1200 800 20
19106 Modular roof 4DC 600 mm - raised 1200 600 150
19107 Modular roof 4DC 800 mm - raised 1200 800 150
19108 Outmost modular roof 4DC 600 mm - raised 1200 600 150
19109 Outmost modular roof 4DC 600 mm - raised 1200 800 150
Doors for modular cabinets
Modular roofs
Features• Suitable for 4DC modular cabinets
• Ensure proper separation of hot and cold air
• Equipped with hardened glass and a single - point lock locked with a button as a standard
• Door guide system allowing simultaneous opening of both leaves (movement of one leaf causes the other to be automatically opened)
• Without a guiding threshold between the cabinets
• Mechanical opening as a standard (version with automatic opening at th request)
Features• Intended for 4DC server cabinets
• Equipped with a plastic transparent element - tool-free assembly using snap-fits
• Good closure of space between the cabinets
• Sealing provided
• Additional opening for cables, sensors and cameras
• Two standard versions available (straight and elevated)
13
ordering information
Product No. Product Desciption Type Width (mm) Depth (mm) Height (mm)
19110 Rear wall 42U 1200 70 2100
19111 Rear wall 45U 1200 70 2240
19112 Rear wall 47U 1200 70 2310
ordering information
Product No. Product Desciption Width (mm) Depth (mm) Height (mm)
19113 Modular Base 4DC 800x800mm 800 800 100
19114 Modular Base 4DC 600x1000mm 600 1000 100
19115 Modular Base 4DC 800x1000mm 800 1000 100
19116 Modular Base 4DC 600x1200mm 600 1200 100
19117 Modular Base 4DC 800x1200mm 800 1200 100
Rear walls for 4DC modular cabinets
Base
Features• Intended assembly with 4DC cabinets
• Made of steel RAL 9005
• Rear cover and side modules provided with large holes (250 x70 mm) for easy routing of cable bundles (base provided with one brysh fromments as a standard)
• Perforated front cover
• Floor - leveller feet (include in delivery)
• Load capacity up to 1500 kg
Features• Intended for permanent closure of hot/cold zone for 4DC
modular server cabinets
• Ensure proper separation of hot and cold air
• Structure allows easy opening of cabinets adjoining the wall
14
ordering information
Product No. Product Desciption Type Width (mm)
19121 Vertical cover 4DC, for cabinets width 600mm (1 pc) 42U 600
19122 Vertical cover 4DC, for cabinets width 600mm (1 pc) 45U 600
19123 Vertical cover 4DC, for cabinets width 600mm (1 pc) 47U 600
ordering information
Product No. Product Desciption
19124 Air duct brush cover 4DC upper/lower
ordering information
Product No. Product Desciption Type Width (mm)
19118 Vertical cover 4DC, with holes 3 x 1Ufor cabinets with a width of 800 mm (1 pc) 42U 800
19119 Vertical cover 4DC, with holes 3 x 1Ufor cabinets with a width of 800 mm (1 pc) 45U 800
19120 Vertical cover 4DC, with holes 3 x 1Ufor cabinets with a width of 800 mm (1 pc) 47U 800
Cover for cabinets with a width of 800 mm provided with 3 x 1U holes
Cover for cabinets with a width of 600 mm
Upper and lower air duct cover
Features• Made of steel sheet RAL 9005
• Ensures proper air separation in the cabinet
• Provided with three 1U holes for vertical installation of additional equipment outside the 19" space and brush grommet for closure of the remaining free space
• Use of brush grommet allows cable bundles to be routed from the front towards the inside of the cabinet
Features• Made of steel sheet RAL 9005
• Ensures proper air separation in the cabinet
• Provided with a brush grommet for closure of the space between the 19” mounting sectins and the side wall
• Use of brush grommets allows routing of cable bundles from the front towards the inside of the cabinet
Features• Made of steel sheet RAL 9005
• Ensures proper air separation in the cabinet
• Provided with a brush grommet for closure of the space above and below 19” mounting sections
• Brush grommet allows cable bundles to be routed from the front towards the inside of the cabinet
15
ordering information
Product No. Product Desciption Type Width (mm)
19125 Vertical organiser 4DC, for cabinets with a width of 800 mm (1 pc) 42U 800
19126 Vertical organiser 4DC, for cabinets with a width of 800 mm (1 pc) 45U 800
19127 Vertical organiser 4DC, for cabinets with a width of 800 mm (1 pc) 47U 800
Vertical cable organiser for cabinets with a width of 800 mm
Blank panel - tool-free mounting
Vertical cable ladder
Features• Made of steel sheet RAL 9005
• Proper cable separation from the cabinet front panels
• For management, routing and concealment of cooper and optical cable bundles
• For easy handling, the organiser consists of 3 parts, snap-fitted front covers
Features• Made of steel sheet
• Suitable for blanking free segments in the 19’’ area, providing appropriate separation of cold/hot air masses
• Easy mounting through the use of plastic latches
Features• Made from sheet steel with aluminum and zinc coating
• For vertical management and routing of copper and optical cable bundles
• Numerous holes for provision of additional cable organisation elements (cable holders, cable ties)
ordering information
Product No. Product Desciption Type
19130 Vertical cable ladder 4DC (1 pc) 42U
19131 Vertical cable ladder 4DC (1 pc) 45U
19132 Vertical cable ladder 4DC (1 pc) 47U
ordering information
Product No. Product Desciption Type Color
19128 Blank panel 1U - tool - free mounting 1U Black
19129 Blank panel 2U - tool - free mounting 2U Black
19274 Blank panel 3U - tool - free mounting 3U Black
19275 Blank panel 6U - tool - free mounting 6U Black
19276 Blank panel 1U - tool - free mounting 1U Light grey
19277 Blank panel 2U - tool - free mounting 2U Light grey
19278 Blank panel 3U - tool - free mounting 3U Light grey
19279 Blank panel 6U - tool - free mounting 6U Light grey
16
ordering information
Product No. Product Desciption Width (mm)
19135 Power strip holder for cabinets with a width of 600 mm 4DC 600
19136 Power strip holder for cabinets with a width of 800 mm 4DC 800
ordering information
Product No. Product Desciption
19133 Horizontal cable ladder 4DC, 1000 (1 pc)
19134 Horizontal cable ladder 4DC, 1200 (1 pc)
Horizontal cable ladder
Holders for power strips
Cabinet base
Features• Made from sheet steel with aluminum and zinc coating
• For horizontal management and routing of copper and optical cable bundles
• Numerous holes for provision of additional cable organisation elements (cable holders, cable ties)
Features• Made of steel sheet RAL 9005
• Intended for placement of power strips in cabinets with a width of 600 mm and 800 mm
• Holes suitable for both tool and tool - free assembly (clips)
• Sold in sets (2 items in a set)
Features• Made of steel sheet RAL 9005
• Provides extra protection for the cabinet base against dust
• Comprises three elements: two end elements with brush grommets and the central element allowing installation of a ventilation panel
• Can be joined to the cabinet frame without using any tools
ordering information
Product No. Product Desciption Width (mm) Depth (mm)
19137 Cabinet base 4DC 800 x 800 mm 800 800
19138 Cabinet base 4DC 600 x 1000 mm 600 1000
19139 Cabinet base 4DC 600 x 1200 mm 600 1200
19140 Cabinet base 4DC 800 x 1000 mm 800 1000
19141 Cabinet base 4DC 800 x 1200 mm 800 1200
17
ordering information
Product No. Product Desciption
19142 Set for joining 4DC cabinets (set)
Cabinet joining set
Features• Made of steel sheet RAL 9005
• For joining adjacent 4DC cabinets
• Easy joining from the front and rear side of cabinets (joining of equipped cabinets possible)
• Set includes elements required for joining together two cabinets
ordering information
Product No. Product Desciption Type
19143 Mounting section 4DC 42U (2 pcs) 42U
19144 Mounting section 4DC 45U (2 pcs) 45U
19145 Mounting section 4DC 47U (2 pcs) 47U
ordering information
Product No. Product Desciption Type
19146 Central mounting section 4DC 42U (2 pcs) 42U
19147 Central mounting section 4DC 45U (2 pcs) 45U
19148 Central mounting section 4DC 47U (2 pcs) 47U
Mounting section
Central mounting section
Features• Made from sheet steel with aluminum and zinc coating
• Suitable for tool - free assembly
• Permanent marking of U height
Features• Suitable for tool - free assembly
• Installed between standard sections, allows extra fastening for installed equipment
18
19” CABINETS ACCESSORIES
ordering information
Product No. Product Desciption Type Color Depth (mm) Capacity (kg) Mounting Range (mm) Line Feed (mm)
19183 Pullout shelf 1U Light grey 300 80 150-500 175
19184 Pullout shelf 1U Light grey 450 80 250-600 345
19185 Pullout shelf 1U Light grey 650 80 350-700 545
19186 Pullout shelf 1U Black 300 80 150-500 175
19187 Pullout shelf 1U Black 450 80 250-600 345
19188 Pullout shelf 1U Black 650 80 350-700 545
Pullout 1U Shelves Fixed on Four 19” Mounting Profiles
Features• Four corner mounting for a sturdy hold
• Fixing to rear mounting profiles necessary
• Can be used in all network server cabinets and open frames
• Material: sheet metal
Shelf 2U/19”
Features• Can be used in all network and server cabinets and open
frames from a depth of 500 mm
• Adjustable in depth at a hole distance of 25mm
• Material: sheet metal
Shelf 2U Fixed on Two 19” Mounting Profiles
Features• Two corner mounting
• Material: sheet metal
ordering information
Product No. Product Desciption Type Color Depth (mm) Capacity (kg)
19189 Shelf 2U Light grey 400 40
19190 Shelf 2U Black 400 40
ordering information
Product No. Product Desciption Type Color Depth (mm) Capacity (kg)
19191 Shelf 1U Light grey 250 10
19192 Shelf 2U Light grey 300 13
19193 Shelf 1U Black 250 10
19194 Shelf 2U Black 300 13
19
ordering information
Product No. Product Desciption Type Color Depth Range (mm) Capacity (kg)
19169 Heavy-duty depth adjustable shelves 1U Light grey 350-600 150
19170 Heavy-duty depth adjustable shelves 1U Light grey 500-900 150
19171 Heavy-duty depth adjustable shelves 1U Black 350-600 150
19172 Heavy-duty depth adjustable shelves 1U Black 500-900 150
Heavy-duty Depth Adjustable Shelves 1U/19”Shelves for heavier equipment.
Features• Four corner mounting for a sturdy hold
• Fixing to rear mounting profiles necessary
• Can be used in all network server cabinets and open frames
• Adjustable length with a hole spacing of 25 mm
• Material: sheet metal
Adjustable Shelves 1U Fixed on Four 19” Mounting Profiles
Features• Can be used in all network and server cabinets and open frames
• Adjustable depth
• Four corner mounting for a sturdy hold
• Material: sheet metal
ordering information
Product No. Product Desciption Type Color Mounting Range (mm) Capacity (kg) Depth (mm)
19173 Depth adjustable shelves 1U Light grey 150-500 80 350
19174 Depth adjustable shelves 1U Light grey 250-600 80 450
19175 Depth adjustable shelves 1U Light grey 350-700 80 550
19176 Depth adjustable shelves 1U Light grey 450-800 80 650
19177 Depth adjustable shelves 1U Light grey 550-900 80 750
19178 Depth adjustable shelves 1U Black 150-500 80 350
19179 Depth adjustable shelves 1U Black 250-600 80 450
19180 Depth adjustable shelves 1U Black 350-700 80 550
19181 Depth adjustable shelves 1U Black 450-800 80 650
19182 Depth adjustable shelves 1U Black 550-900 80 750
ordering information
Product No. Product Desciption Type Color
19203 Counterbalance for Server Cabinet For server cabinets 600 Light Grey
19204 Counterbalance for Server Cabinet For server cabinets 800 Light Grey
19205 Counterbalance for Server Cabinet For server cabinets 600 Black
19206 Counterbalance for Server Cabinet For server cabinets 800 Black
Counter Balance for Server Cabinet
Features• Designed for mounting on 19” server cabinet, made from sheet metal
20
Plinth for Server Cabinets with Tip Over Protection
Features• Easy assembly
• Can be used in combination with leveling feet
• Cable entries on both sides and rear
• Tip over protection integrated in base frame
• Material: sheet metal
ordering information
Product No. Product Desciption Color Load Capacity Width (mm) Depth (mm) Height (mm)
19195 Plinth for server cabinets Light grey 600 600 1000 100
19196 Plinth for server cabinets Light grey 600 800 1000 100
19197 Plinth for server cabinets Black 600 600 1000 100
19198 Plinth for server cabinets Black 600 800 1000 100
Sliding Rails for Heavy-duty Equipment
Features• Fixing to the front and rear of 19” profiles
• Can be used in all network and server cabinets and open frames
• Material: sheet metal
ordering information
Product No. Product Desciption Type Color Depth (mm) Capacity (kg)
19209 Sliding rails for heavy-duty equipment 600 Light grey 340 150
19210 Sliding rails for heavy-duty equipment 800 Light grey 540 150
19211 Sliding rails for heavy-duty equipment 900 Light grey 640 150
19212 Sliding rails for heavy-duty equipment 1000 Light grey 740 150
19213 Sliding rails for heavy-duty equipment 1200 Light grey 940 150
19214 Sliding rails for heavy-duty equipment 600 Black 340 150
19215 Sliding rails for heavy-duty equipment 800 Black 540 150
19216 Sliding rails for heavy-duty equipment 900 Black 640 150
19217 Sliding rails for heavy-duty equipment 1000 Black 740 150
19218 Sliding rails for heavy-duty equipment 1200 Black 940 150
ordering information
Product No. Product Desciption Length (mm) Capacity (kg)
19151 Heavy duty castor set 600 600
19152 Heavy duty castor set 800 600
Heavy-duty Castor Set
Features• Mounting under the base plate of the network cabinets
• Max. load - 600 kg
• With brake
21
Plinth for Network Cabinets
Features• Quick and easy to assemble with M6 x 8 mm bolts (supplied)
• Fixing to the network cabinet with supplied screws
• Perforate front plate and cable entries from both sides and rear
• Material: sheet metal
• The base height can be increased to 200 mm by screwing two bases together
ordering information
Product No. Product Desciption Color Load Capacity Width (mm) Depth (mm) Height (mm)
19153 Plinth for network cabinets Light grey 400 600 600 100
19157 Plinth for network cabinets Light grey 400 600 800 100
19159 Plinth for network cabinets Light grey 400 600 1000 100
19156 Plinth for network cabinets Light grey 400 800 600 100
19154 Plinth for network cabinets Light grey 400 800 800 100
19160 Plinth for network cabinets Light grey 400 800 1200 100
19161 Plinth for network cabinets Black 400 600 600 100
19165 Plinth for network cabinets Black 400 600 800 100
19167 Plinth for network cabinets Black 400 600 1000 100
19164 Plinth for network cabinets Black 400 800 600 100
19162 Plinth for network cabinets Black 400 800 800 100
19168 Plinth for network cabinets Black 400 800 1200 100
Blank panel - tool-free mounting
Features• Made of steel sheet
• Suitable for blanking free segments in the 19’’ area, providing appropriate separation of cold/hot air masses
• Easy mounting through the use of plastic latches
ordering information
Product No. Product Desciption Type Color
19128 Blank panel 1U - tool - free mounting 1U Black
19129 Blank panel 2U - tool - free mounting 2U Black
19274 Blank panel 3U - tool - free mounting 3U Black
19275 Blank panel 6U - tool - free mounting 6U Black
19276 Blank panel 1U - tool - free mounting 1U Light grey
19277 Blank panel 2U - tool - free mounting 2U Light grey
19278 Blank panel 3U - tool - free mounting 3U Light grey
19279 Blank panel 6U - tool - free mounting 6U Light grey
22
ordering information
Product No. Product Desciption Type Color For cabinets with depth of (mm)
19199 Vertical cable management panel 42U Light grey 800
19200 Vertical cable management panel 42U Light grey 1000
19201 Vertical cable management panel 42U Black 800
19202 Vertical cable management panel 42U Black 1000
Vertical Cable Management Panel
Features• Panel delivered with two traverses for mounting in cabinets
• Designed for maintaining, organizing and concealing copper and fiber optic cable bundles within cabinets
• Optional mounting on left or right side
• Color options: Black or light grey
ordering information
Product No. Product Desciption Type
19221 Organizer with additional side holders 1U
19219 Sideholder 1U 40x80 mm 1U
19220 Sideholder 2U 80x80 mm 2U
Optional - Organizer with Additional Side Holders
Features• Allows for clear organization of cabling
• Holders can be mounted horizontally as well as vertically
• Holes between holders allow for leading cables through the back of the organizer
• Additional cable holders can be mounted at the side of the organizer allow for vertical organization of cabling
• Material - highly flexible plastic
• Standard: 19’’
ordering information
Product No. Product Desciption Length (mm)
19149 Brush 250
19150 Brush 450
Brush TerminalAdditional standing, server and wall-mounting cabinets equipment.
23
Cable Management Panel 19”
ordering information
Product No. Product Desciption Type Color
19237 Cable management panel 1U Light grey
19238 Cable management panel 1U with brush Light grey
19239 Cable management panel 1U Black
19240 Cable management panel 1U with brush Black
Features• Options: with brush terminal or cable entry
• Material: sheet metal
Horizontal Cable Routing Panels
Features• Made from sheet metal with metal holders
• Enables simple and clear routing and organization of cables
ordering information
Product No. Product Desciption Type Color Width (mm) Depth (mm) Height (mm)
19244 Horizontal Cable routing panels 1U Light grey 482 45 43
19245 Horizontal Cable routing panels 2U Light grey 482 77.6 88
19246 Horizontal Cable routing panels 1U Black 482 45 43
19247 Horizontal Cable routing panels 2U Black 482 77.6 88
Cable Management 19”
Features• Keep cable bundles organised
• Heigh: 1U or 2U
• Color options: Black or light grey
ordering information
Product No. Product Desciption Type Number of holders Material Color
19229 Cable Management 19” 1U 5 Plastic Black
19227 Cable Management 19” 1U 5 Plastic Light grey
19272 Cable Management 19” 1U 4 Metal Black
19271 Cable Management 19” 1U 4 Metal Light grey
19230 Cable Management 19” 2U 5 Metal Black
19228 Cable Management 19” 2U 5 Metal Light grey
24
Cable Routing BracketCable organizer for vertical mounting on stands and racks.
Features• For cable routing in stands and racks
• Mounting on the 19” profile rails
• Material: galvanized steel
ordering information
Product No. Product Desciption Eye Size (mm)
19241 Cable routing bracket 40 x 40
19242 Cable routing bracket 40 x 80
19243 Cable routing bracket 80 x 80
ordering information
Product No. Product Desciption Type Width (mm) Depth (mm) Height (mm)
19248 Cable tidy rails Back handle cable 19” 482 60 60
19249 Cable tidy rails Lateral handle cable 600 mm 500 18 60
19250 Cable tidy rails Lateral handle cable 800 mm 700 18 60
19251 Cable tidy rails Lateral handle cable 900 mm 800 18 60
19252 Cable tidy rails Lateral handle cable 1000 mm 500 18 60
Cable Rails
Features• Organized laying and strain relief of cables via cable ties
• Cable rail for side mounting on the 19” profile rails or for installation on the rear transverse to the profile frame
• Material: galvanized sheet metal
Perforated Plate
Features• Can be used in all standing network and server cabinets
• Increases the ventilating area of the cabinet
• Material: sheet metal
ordering information
Product No. Product Desciption Type Color Width (mm) Depth (mm) Thickness (mm)
19256 Perforated blinding plate 4U Light Grey 610 610 1.5
19257 Perforated blinding plate 8U Light Grey 495 495 1.5
19258 Perforated blinding plate 4U Black 610 610 1.5
19259 Perforated blinding plate 8U Black 495 495 1.5
25
Drawer for Cables
Features• Ideal for organizing, managing and storing cables
(pigtails and patchcords)
• Front and rear cable entries
• 1.5 mm sheet metal
ordering information
Product No. Product Desciption Width (mm) Depth (mm) Height (mm)
19253 Drawer for cable reserve 438 44 250
Lockable Keybord Drawer 2U/19”
Features• Drawer on telescopic rails
• Can be used in all network server cabinets and open frame
• Material: sheet metal
ordering information
Product No. Product Desciption Type Color Depth (mm) Line Feed (mm)
19254 Lockable keybord drawer 2U Light Grey 350 185
19255 Lockable keybord drawer 2U Black 350 185
Lighting Unit 19”/1U
Features• Two spotlights, each 20 W
• Front On/Off switch
• Contact-proof cover
• Connecting cable not included
• Lamp ready for the connection of door contact switch
• Operating voltage: 230 V, 50 Hz
• Material: sheet metal
ordering information
Product No. Product Desciption Type Color
19207 Lighting unit 19” 1U Light Grey
19208 Lighting unit 19” 1U Black
26
ordering information
Product No. Product Desciption Type Color Capacity (m³/h) Width (mm) Depth (mm) Height (mm)
19231 Fan 2-fans Light grey 324-390 482 176 45.5
19232 Fan 4-fans Light grey 648-780 482 352 45.5
19233 Fan 6-fans Light grey 972-1170 482 352 45.5
19234 Fan 2-fans Black 324-390 482 176 45.5
19235 Fan 4-fans Black 648-780 482 352 45.5
19236 Fan 6-fans Black 972-1170 482 352 45.5
Cabinet FansThe latest version of 19” cabinet fans. The units can be mounted onto the roof or the 19” mounting profiles.
Features• Suitable for mounting in all network and server racks
• Control via connected thermostat
• Thermostat holder
• Main connection by means of connecting cable to non-heating appliance socket (connecting cable not included)
• Rated voltage 230 V, 50 Hz
• Illuminated On/Off switch
• Material: sheet metal
ordering information
Product No. Product Desciption Width (mm) Depth (mm) Thickness (mm)
19225 Filter panel 610 610 15
19226 Filter panel 495 495 15
Filter PanelFits all cabinet types. Filter system for incoming air.
Features• For connecting and lining up network cabinets and server cabinets
• For air filtering
• Can be used in all standing network and server cabinets
• Increases the ventilating area of the cabinet
• Material: sheet metal
27
Line-up BoltsUsed for mounting of multi cabinet/units from the West and DC series.
Features• For connecting and lining up network cabinets and server cabinets
• After removing the side sections, the cabinets can be joined at the top and the bottom by bolting the frames together (up to 900 mm cabinet dept, two connecting bolts each at the top and the bottom for 1000 mm cabinet depth, 3 connecting bolts each)
• M6 thread
• Material: galvanized steel
ordering information
Product No. Product Desciption Total Length (mm) Bolt Diameter (mm)
19223 Line-up bolts 55 10
ordering information
Product No. Product Desciption
19224 Complete grounding set
Complete Grounding SetDesigned for indoor server room usage.
ordering information
Product No. Product Desciption Type Width (mm) Height (mm)
19269 Underfloor Mounting Kit 19” 2 U 650 150
19270 Underfloor Mounting Kit 19” 4 U 650 240
Underfloor Mounting Kit 19” Very easy to install, preassembled rack for installation of 19” products un-der the computer room and server floor with 600 mm c/c distance between the feet.
Features• Made of 1 mm galvanized steel
• c/c distance between the feet: 600 mm
• Leg diameter: max 25 mm
• Clamps, nuts and washers are included
• 19” mounting with nuts and bolts
28
Rack 19” 19” rack with intergrated cable channel for easy arrangement of patch cables.
ordering information
E- No. Product No. Product Description Type Width (mm) Depth (mm) Height (mm) Load Capacity (kg)
5004100 19263 Rack 2000 42U 600 400 2100 250
5004110 19261 Rack 1600 30U 600 400 1600 250
5004111 19262 Rack 1800 35U 600 400 1800 250
Features• Material: Sheet metal
• Surface treatm. Electroplated
• Capacity 30u, 35u, 42u Space for ≤4000 patch cables with over length ≤4 m Max loading weight 250 kg
• Additional info Grounding bar for 10 connections Adjustable feet and wall attachment
AccessoriesFloor attachment 1 pair
Cable channel 1 pc
Patch cable managem. 1600 Kit with 5 guides
Patch cable managem. 1800 Kit with 6 guides
Patch cable managem. 2000 Kit with 8 guides
29
POWER DISTRUBUTION UNITS – PDU
ordering information
For more information see PDU catalogue available at issuu.com/hexatronic
Combining the technology requirements of the modern data center application en-vironment, Hexatronic’s Power Distribution Systems are designed to maximize per-formance of data centers in industries like network communication, telecom, electric power, finance, insurance, aerospace, transportation, information processing, edu-cation and medical. Hexatronic PD Systems combine network communication, pow-er distribution and accurate measurement of energy consumption.
All products have a modularized structure that can be manufactured according to customer’s technological requirements.
Hexatronic PD Systems have optional remote environment management units for monitoring climate and performace parameters in the data center. The environment management system offers full control over operating status, power consumption temperature, humidity and other important conditions.The systems consist of embedded software, units for long-distance monitoring, net-work node sensors, power distribution and other advanced techniques for monitor-ing the micro environment, in one or several cabinets.
Characteristics
• Key technology with fully independent intellectual property
• Embedded Linux operation system
• Remote monitoring and management via network
• Graphic display of operation data
• Accurate measurement of energy consumption
• Supports Wi-Fi access technology
• High power input and high density socket output
• High speed, large capacity and high security
• Strong function, high performance and advanced technology
• Safe, reliable and energy efficient
POWER DISTRIBUTION AND MONITORING
SYSTEMS FOR OPTIMAL PERFORMANCE
30
PDU 19” SCH (Schuko) -xx
Features• Rating voltage: 250VAC 50/60Hz
• Rating current: 16A
• Max power: 4000W
• Saftey authentication: C E
• Fix the cable: Small cable clamp
ordering information
Product No. Product Desciption Type Width (mm) Length (mm) Height (mm)
19500 PDU 19” SCH (Schuko) -xx Horizontal 44,4 483 44,4
PDU 19” C13 -xx
Features• Rating voltage: 250VAC 50/60Hz
• Rating current: 16A
• Max power: 4000W
• Saftey authentication: C E
• Fix the cable: Small cable clamp
• Single anti-fall C13 socket
ordering information
Product No. Product Desciption Type Width (mm) Length (mm) Height (mm)
19501 PDU 19” C13 -xx Horizontal 44,4 481 44,4
PDU VE (Vertical) -xx
Features• Rating voltage: Input 380V,output 250V
50/60Hz
• Rating current: 3x32A
• Max power: 3x8000W
• Saftey authentication: CE
• Fix the cable: Cable clamp
ordering information
Product No. Product Desciption Type Width (mm) Length (mm) Height (mm)
19502 PDU VE (Vertical) -xx Vertical 68 1587 44,4
xx=denotes configuration
31
PDU VE (Vertical) SNMP -xx
Features• Rating voltage: 250VAC 50/60Hz
• Rating current: 16A
• Max power: 4000W
• Saftey authentication: CE
ordering information
Product No. Product Desciption Type Width (mm) Length (mm) Height (mm)
19503 PDU VE (Vertical) SNMP -xx Vertical 66,6 1785 44,4
Functions• Monitor
• Alarm
• Control and configure
• Log record
• Dasy chain
• Management
Accessories• Temperature/humidity
• Door sensor
• Smoke sensor
• Water sensor
PDU HO (Horizontal) -xx
Features• Rating voltage: 250VAC 50/60Hz
• Rating current: 16A
• Max power: 4000W
• Saftey authentication: C E
• Fix the cable: Small cable clamp
• Protection function: 16A digital ammeter (volt & amp)
ordering information
Product No. Product Desciption Type Width (mm) Length (mm) Height (mm)
19504 PDU HO (Horizontal) -xx Horizontal 44,4 482 44,4
PDU HO (horizontal) SNMP -xx
Features• Rating voltage: 250VAC 50/60Hz
• Rating current: 10A
• Max power: 4000W
• Saftey authentication: CE
ordering information
Product No. Product Desciption Type Width (mm) Length (mm) Height (mm)
19505 PDU HO (horizontal) SNMP -xx Horizontal 66.6 1785 44,4
Functions• Monitor
• Alarm
• Control and configure
• Log record
• Dasy chain
• Management
Accessories• Temperature/humidity
• Door sensor
• Smoke sensor
• Water sensor
xx=denotes configuration
32
FIBER OPTIC SYSTEMS
ordering information
Product No. Product Desciption Type
18180 MTP/MPO fiber cassette, max 12 connections
18181 MTP/MPO fiber rack/panel, max 4 cassettes 1 U
18182 MTP/MPO fiber rack/panel, max 12 cassettes 3 U
18183 MTP/MPO Blanking Cover
Fiber – MTP/MPO SolutionMTP / MPO fiber cassette for mounting in 1 unit and 3 unit panels, each cassette holds up to 24 fibers. The cassettes come with a strain relief device.
Features• Up to 12 fiber cassettes
• 1 and 3 units panels
• Easy to install
• Delivered with adapter
ODFComplete ODF with a capacity up to 192 fibers. The product comes complete with fanout and adapters, that have been tested accordingly.
Features• 192 fiber 1 unit
• Ready to plug into MPT/MPO on the back
• Supplied factory tested
ordering information
Product No. Product Desciption
18147 ODF 1U 24 adapters
33
MTP/MPO CablesThe MTP/MPO cable system is a smart and effective way to build data center solutions. The MTP solution is space saving and cost effective. MTP has a high quality and is available in both multi-mode and single-mode.
Features• Array trunk cabling
• Array fiber to single fiber cassettes
• High fiber density card edge access
• Optical switching interframe connections
• Meets IEC Standard 61754-7 - Meets TIA/EIA 604-5 Type MPO Structured cabling per - - TIA-568-C Parallel Optics - Optical Internetworking Forum (OIF) Compliant Infiniband Compliant 10G Fiber Channel Compliant 40G and 100G IEEE 802.3
ordering information
Product No. Product Desciption
19600-xx Patch cable 12f OM4 MTP (male)-LC
19601-xx Patch cable 24f OM4 MTP (male)-LCD
19602-xx Patch cable 48f OM4 MTP (male)-LCD
19603-xx Patch cable 12f OM3 MTP(male)-MTP(male)
19604-xx Patch cable 12f OM4 MTP(male)-MTP(male)
19605-xx Patch cable 24f OM3 MTP(male)-MTP(male)
19606-xx Patch cable 24f OM4 MTP(male)-MTP(male)
19607-xx Patch cable 48f OM3 MTP(male)-MTP(male)
19608-xx Patch cable 48f OM4 MTP(male)-MTP(male)
19609-xx Patch cable 12f OM3 MTP(male)-LC
19610-xx Patch cable 12f OM4 MTP(male)-LC
19611-xx Patch cable 24f OM3 MTP(male)-LC
19612-xx Patch cable 24f OM4 MTP(male)-LC
19613-xx Patch cable 48f OM3 MTP(male)-LC
19614-xx Patch cable 48f OM4 MTP(male)-LC
19615-xx Patch cable 8f OM3 MTP(female)-LC. For QSFP
19616-xx Patch cable 12f SM MTP (male)-LC
19617-xx Patch cable 24f SM MTP (male)-LCD
19618-xx Patch cable 48f SM MTP (male)-LCD
19619-xx Patch cable 12f SM MTP(male)-MTP(male)
19620-xx Patch cable 12f SM MTP(male)-MTP(male)
19621-xx Patch cable 24f SM MTP(male)-MTP(male)
19622-xx Patch cable 24f SM MTP(male)-MTP(male)
19623-xx Patch cable 48f SM MTP(male)-MTP(male)
19624-xx Patch cable 48f SM MTP(male)-MTP(male)
19625-xx Patch cable 12f SM MTP (male)-LC
19626-xx Patch cable 12f SM MTP (male)-LC
19627-xx Patch cable 24f SM MTP (male)-LC
19628-xx Patch cable 24f SM MTP (male)-LC
19629-xx Patch cable 48f SM MTP (male)-LC
19630-xx Patch cable 48f SM MTP (male)-LC
19631-xx Patch cable 8f SM MTP (female)-LC for QSFP
xx=denotes the length
34
GLOBAL PRESENCE
Hexatronic - a world wide company
Hexatronic Elektronik & Data is a part of Hexatronic Group which is an innovative Swedish technology group that is growing fast with subsidiaries on several continents.
In Sweden we have offices in Hudiksvall, Skellefteå, Örebro and Stockholm with the headquarter in Gothenburg.
Outside Sweden, Hexatronic Group has subsidiaries in Dallas, USA (Hexatronic US) in Oslo, Norway (Hexatronic AS) and in Tianjin, China (Hexatronic Asia). There are also sales offices in Helsinki, Finland and in East Sussex, UK.
Hexatronic USA
Hexatronic Norway
Hexatronic UK
35
Hexatronic China
Hexatronic FinlandHexatronic Norway
Hexatronic UKHexatronic Sweden, Headquarter
Hexatronic Group in Sweden
Hexatronic Elektronik & Data - Gothenburg Hexatronic Cables & Interconnect - HudiksvallMemoteknik - SkellefteåThe Blue Shift - StockholmProximion - StockholmTD Fiberoptik - Örebro
linkedin.hexatronicpartners.se twitter.hexatronicpartners.se youtube.hexatronicpartners.se issuu.hexatronicpartners.se facebook.com/hexatronic
Hexatronic Elektronik & Data AB, Exportgatan 47 B, S-422 46 Hisings-Backa, SwedenTel +46 (0)31 742 53 30 [email protected] www.hexatronic.se
Reliable Solutions for the Digital Communications Network
Hexatronic Elektronik & Data AB develops and delivers active compo-nents for fiber optic networks and consists of four business areas: networking, components, site solutions and data center solutions. Since 1998, the company has developed its own products for fiber based networks.
The company markets and delivers active and passive components and products for broadband solutions, primarily within modern technology and customer specific cabling and connectors. Site solutions include fiber optic network installation and other fiber communications infrastructure. Data center solutions comprise of advanced cabinet equipment, power distribution units, fiber optic systems and copper cabling.
A part of Hexatronic Group
Hexatronic Elektronik & Data is a part of Hexatronic which is an innovative Swedish technology group, specializing in fiber communications. The Group provides products and solutions for the fiber optic network and together, the independent, entrepreneurial companies offer a full range of passive infrastructure. We combine our large corporate stability and resources with small company flexibility and speed.
Our customers are companies within the telecommunications industry such as communications and telecom suppliers, operators and network owners. The companies within The Group are Hexatronic Cables & Inter-connect in Hudiksvall, Memoteknik in Skellefteå, Hexatronic Elektronik & Data in Gothenburg, The Blue Shift and Proximion in Stockholm and TD Fiberoptik in Örebro. We also operate outside Sweden with our sub-sidiaries Hexatronic US, Hexatronic AS and Hexatronic Asia.
For more information about Hexatronic Group: www.hexatronicgroup.com
Rev. KAT-093-03