DataSheet - Titan Power Plus SU-2
3
© 2010 SunMaxx Solar, Inc. Specifications subject to change without notice. PRODUCT DATA SHEET TitanPowerPlus SU-2 Flat Plate Collector SunMaxx Solar, Inc. 56 Broome Corporate Pkwy Conklin, NY 13748 1.877.786.6299 1.800.786.0329 fax www.sunmaxxsolar.com 12-Year Warranty (when installed by a certified installer) SRCC Certified Solar Keymark Certified Sealing Casing Lateral thermal insulation Glazing Double-sided adhesive tape Absorber material (copper) Thermal insulation Rear panel 1 2 3 4 5 6 7 8 Technical Specifications Dimensions (in) 79.4 x 38.78 x 3.03 (201.6 x 98.5 x 7.7 cm) Gross Collector Area (ft 2 ) 21.42 (1.99 m 2 ) Net Aperture Area (ft 2 ) 20.17 (1.874 m 2 ) Ratio Net/Gross Area 0.94 Dry Weight (lbs.) 74.96 (34 kg) Fluid Capacity (gal.) 0.26 (1 L) Minimum Flow Rate (gpm) 0.13 (30 L/hr) Nominal Flow Rate (gpm) 0.44 (100 L/hr) Maximum Flow Rate (gpm) 0.79 (180 L/hr) Recommended Flow Rate (gpm) 0.176 - 0.167 (40 - 140 L/hr) Max Number of Collectors in Series 10 Tilt Angle (deg) 35 - 90 Maximum Operating Pressure (psi) 87 (6 bars) Recommended Operating Pressure (psi) 36.3 - 43.5 (2.5 - 3 bars) Stagnation Temperature 383 °F (195 °C) Materials Stainless Steel, grade AISI: 304; 0.7 mm gauge 3.2 mm toughened glass Mounting Options construction for sloping roof integration into sloping roof on flat roof with stand facade
-
Upload
sunmaxx-solar -
Category
Documents
-
view
97 -
download
14
Transcript of DataSheet - Titan Power Plus SU-2
© 2010 SunMaxx Solar, Inc. Specifications subject to change without notice.
PRODUCT DATA SHEETTitanPowerPlus SU-2 Flat Plate Collector
SunMaxx Solar, Inc.56 Broome Corporate PkwyConklin, NY 137481.877.786.62991.800.786.0329 faxwww.sunmaxxsolar.com
12-Year Warranty (when installed by a certified installer)SRCC CertifiedSolar Keymark Certified
SealingCasingLateral thermal insulationGlazingDouble-sided adhesive tapeAbsorber material (copper)Thermal insulationRear panel
1
2
3
4
5
6
7
8
Technical SpecificationsDimensions (in) 79.4 x 38.78 x 3.03
(201.6 x 98.5 x 7.7 cm)
Gross Collector Area (ft2) 21.42 (1.99 m2)
Net Aperture Area (ft2) 20.17 (1.874 m2)
Ratio Net/Gross Area 0.94
Dry Weight (lbs.) 74.96 (34 kg)
Fluid Capacity (gal.) 0.26 (1 L)
Minimum Flow Rate (gpm) 0.13 (30 L/hr)
Nominal Flow Rate (gpm) 0.44 (100 L/hr)
Maximum Flow Rate (gpm) 0.79 (180 L/hr)
Recommended Flow Rate (gpm) 0.176 - 0.167 (40 - 140 L/hr)
Max Number of Collectors in Series 10
Tilt Angle (deg) 35 - 90
Maximum Operating Pressure (psi) 87 (6 bars)
Recommended Operating Pressure (psi) 36.3 - 43.5 (2.5 - 3 bars)
Stagnation Temperature 383 °F (195 °C)
MaterialsStainless Steel, grade AISI: 304; 0.7 mm gauge
3.2 mm toughened glass
Mounting Optionsconstruction for sloping roof
integration into sloping roof
on flat roof with stand
facade
© 2010 SunMaxx Solar, Inc. Specifications subject to change without notice.
PRODUCT DATA SHEETTitanPowerPlus SU-2 Flat Plate Collector
SunMaxx Solar, Inc.56 Broome Corporate PkwyConklin, NY 137481.877.786.62991.800.786.0329 faxwww.sunmaxxsolar.com
PEAK POWER PER COLLECTOR UNIT (Wpeak)Peak Power (Wpeak) 1501 WThermal Capacity* 4.7 kJ/KFlow rate during test 160 l/hFluid for test Water-Glycol 33.3%
*Specific thermal capacity C of the collector without fluid, determined according to 6.1.6.2 of EN12975-2:2006
INCIDENT ANGLE MODIFIER (IAM)K1, transversal IAM at 50° 0.95
K2, longitudinal IAM at 50° 0.95
PRESSURE DROP (∆p) AT NOMINAL FLOW RATE∆p=1168 Pa (T=20°C)
RELATIVE EFFICIENCY (η)Reference Gross Aperture Absorberη0 0.754 0.801 0.805a1 [WK-1m-2] 3.43 3.64 3.66a2 [WK-2m-2] 0.0106 0.0112 0.0113
APPROVAL STAMPS
SunMaxx Solar, Inc.56 Broome Corporate PkwyConklin, NY 137481.877.786.62991.800.786.0329 faxwww.sunmaxxsolar.com
Architectural Stamps and Remarks
Contractor Stamp and Remarks
Contractor Note - Sign Below
