DAMPERS - AC€¦ · 1 Dampers - AC - HEINEN & HOPMAN 2020 ©Heating Ventilation Air Conditioning...

Dampers - AC - HEINEN & HOPMAN 2020 © 1Dampers - AC - HEINEN & HOPMAN 2020 ©1 Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

DAMPERS - AC DAMPERS - AC Products

Dampers - AC - HEINEN & HOPMAN 2020 © 1Dampers - AC - HEINEN & HOPMAN 2020 ©1

COMPANY INTRODUCTION

Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to ensure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way.

In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.

OPERATING GLOBALLY

Global networking is crucial in every line of business and the shipping industry is certainly no exception. Being able to offer the highest quality of service and products to our clients at all times and in all places is of enormous importance to us. This is why Heinen & Hopman aims to keep expanding our network and know-how and ensure we are exactly where our clients need us to be.

Americas

Europe

Asia3

Countries11Offices

3Factories

220Employees

11Countries

22Offices

4Factories

1200Employees

7Countries

10Offices

7Factories

380Employees


DAMPERS

There are different types of dampers:• Fire and smoke dampers• Air control and shut-off dampers

Fire and smoke dampers Fire and smoke dampers prevent the spread of fire and smoke between fire zones, where people must have the maximum amount of time to react to possible fire. The dampers are type-approved according to A-0 (A-60).The A-60 marine fire and smoke damper complements the range of automatic fire and gas dampers and associated controls. The damper is the solution for shipboard air conditioning and ventilation systems fire safety engineering strategies.

ACFD A-60 fire and smoke dampersFrame: AISI 316 stainless steel / galvanized steel.Thickness: 1.2, 2 or 3 mm.Blades: AISI 316 and AISI 430 options.Sizes: 100x100 ~ 1000x1000 mm.Circular connection pieces: 100 ~ 1000 mm.

Air control and shut-off dampers Air control and shut-off dampers control the airflow or shut off airflow in ductwork where tightness, thermal insulation and reliability are important. The dampers meet international standards for both rectangular and circular ducts and the leakage class is accordance with the EN1751 standards.

ACCS air control and shut-off balancing dampersFrame: AISI 316 stainless steel / galvanized steel.Thickness: 1.5 mm.Blades: AISI 316 stainless steel.Sizes: 100x100 ~ 1200x1200 mm at 50 mm intervals.Operation system: electrical, pneumatic or manual.Double section modules possible.

Control The dampers can be controlled electrically, pneumatically or manually. In case of fire, the fire and gas dampers will close automatically.

The electrically and pneumatically controlled dampers are driven by an actuator.

Belimo actuator: standard actuatorSchischek actuator: actuator used in explosion-proof areas or if the actuator must open/close within 3 sec./90°C.

Dampers - AC - HEINEN & HOPMAN 2020 ©2


MARINE FIRE DAMPERS

A-60 marine fire and smoke dampers are used in air conditioning and ventilation systems, in dry filtered air. The dam-pers have been tested and approved for fitting to class A-60 divisions (bulkheads and decks), when suitably insulated (refer to insulation details).

The dampers can be used where the maximum system pressure is up to 1500 Pa and duct velocities are limited to 15m/s. Pay particular attention to the blade rivets, where crevice corrosion will cause rapid failure of blades if not kept in check.The dampers are suitable for vertical and horizontal applications, with airflow in either direction. The dampers are nor-

mally open and failsafe to the closed position.

The dampers have two casings and blade options:1. 430 Stainless steel blades, galvanized steel casing - only suitable for installation in dry filtered systems.2. 316 Stainless steel blades, casing and drive - more suited for corrosive conditions, but even this will rapidly corrode

and fail if not properly maintained, when used in air intake systems at sea. The addition of a mist eliminator is highly recommended and access must be provided for maintenance.

• Type-approved class A-60 when suitably insulated.• Available as ATEX-approved.• Optional Silicon blade seals can be provided for low leakage requirement at ambient temperature.• Electrical Thermal Release (ETR) temperature 72 ºC or Pneumatic Thermal Release (PTR) with a failsafe 74 °C fusible

link.• Low weight due to patented double skin blade structure.• Automatic electrical, pneumatic or spring operation system available.• Maximum duct pressure: 1500 Pa. Maximum air velocity: 15 m/s.

Dimensions and material thicknessThe dampers meet international standards for both rectangular (width B 100-1000 mm and height H 100-1000 mm, 1 mm division) and circular ducts (Ø 100-1000 mm).

Part Material Finishing

Frame Stainless steel EN 1.4404 (AISI316L) / Galvanized steel -

Blades Stainless steel EN 1.4404 (AISI316L) -

Bearings Stainless steel EN 1.4404 (AISI316L) -

Shafts Stainless steel EN 1.4404 (AISI316L) -

Dimensions S mm

L mm

If B or H 100 till 1000 1.2 / 2 / 3 150

if Ø100 till Ø1000 1.2 / 2 / 3 230

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com


ACCS AIR CONTROL AND SHUT-OFF DAMPERS • Low closed blade leakage performance.• Temperature operation range up to +180 °C.• Maximum duct pressure: 1000 Pa. Maximum air velocity: 10 m/s.• Low close blade leakage to EN 1751 class 2 requirements.

Part Material Note

Casing Galvanized steel Stainless steel AISI316L also available

Blades Galvanized steel Silicon blade seal, suitable for 280OC

Blade gaskets Silicon Heat-proof model: LTE silicon

Duct gasket Rubber compound Circular connections

Bearings Synthetic / stainless-steel blade bearings Self-lubricated heat-proof model: stainless steel AISI316L

Drive shaft Galvanized steel Rectangular bar (15x15 mm)

W H

200 - 1200 200 - 1200

ØD WxH

200 - 1000 200 x 1000

Dimensions in mm





www.heinenhopman.com

Heinen & Hopman encourages a more

sustainable world. By providing eco-friendly solutions and serviceswe offer our clients

the option of reducing energy consumption

and thus CO2 emissions.

Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

AustriaT: +43 1720 1309E: [email protected]

BrazilT: +55 213 587 4241/4244E: [email protected]

CanadaT:+1 450 659 6571E: [email protected]

DenmarkT: +45 5164 1614E: [email protected]

France - La CiotatT: +33 4 4204 8685E: [email protected]

France - AntibesT: +33 4 8902 4562 E: [email protected]

GermanyT:+49 4073 1680E: [email protected]

GermanyT:+49 471 9869 300E: [email protected]

IndiaT: +91 336 499 1293E: [email protected]

ItalyT: +39 187 187 8500E: [email protected]

The Netherlands (HQ)T: +31 33 299 2500E: [email protected]

The Netherlands - RotterdamT: +31 18 020 9210E: [email protected]

NorwayT: +47 6919 0900E: [email protected]

Peoples Republic of ChinaT: +86 213 253 2896E: [email protected]

Peoples Republic of ChinaT: +86 510 8528 1763E: [email protected]

PolandT: +48 914 331 800E: [email protected]

RomaniaT: +40 236 448 222E: [email protected]

RussiaT: +7 812 449 3535E: [email protected]

SingaporeT: +65 6897 7879E: [email protected]

South KoreaT: +82 704 901 0000E: [email protected]

SpainT: +34 932 259 668E: [email protected]

SwedenT: +46 3121 7500E: [email protected]

TurkeyT: +90 216 493 8118E: [email protected]

UAE - Abu Dhabi T:+971 2550 4147E: [email protected]

UAE - DubaiT: +971 4263 5453E: [email protected]

USA - Seattle, Washington T: +1 206 632 7883E: [email protected]

USA - Fort Lauderdale, FloridaT: +1 954 463 0110E: [email protected]

USA - Houma, Louisiana T: +1 985 876 7982E: [email protected]

Do you require more information about our products or do you require advice? I am keen to help you further!

“ “

Bas Veltman- Sales Manager [email protected]

DAMPERS - AC€¦ · 1 Dampers - AC - HEINEN & HOPMAN 2020 ©Heating Ventilation Air Conditioning...

Documents

Transcript of DAMPERS - AC€¦ · 1 Dampers - AC - HEINEN & HOPMAN 2020 ©Heating Ventilation Air Conditioning...