ECO-FS 400-1T Hp15

Nr. 1 Operating unit with Motor spindle Hp 15 with horizontal shaft spindle D.60 mm for direct cutting.

ECO-FS 400-2T Hp15

Nr. 2 Operating unit with Motor spindle Hp 15 with horizontal shaft spindle D.60 mm for direct cutting.

Tilt support for big size up to 600x600 mm

CUTTING MACHINESECO-FS 400-1T HP15 ECO-FS 400-2T HP15

Tecnema - Via Abetone Inferiore, 44-41053, MARANELLO (Modena) ITALY - www.tecnema.itTel +39.0536.94.24.49 - Fax +39.0536/94/24/49 - Skype: tecnema - Email: sales_dep@tecnema.it

DISTRIBUTED BY:

Tecnema - Via Abetone Inferiore, 44-41053, MARANELLO (Modena) ITALY - www.tecnema.itTel +39.0536.94.24.49 - Fax +39.0536/94/24/49 - Skype: tecnema - Email: sales_dep@tecnema.it

• Electro welded metallic structure in solid carpentry, bearing conveyance, supports and brack-ets for adjustment units, casings and protections.

• Conveyor on grinded bench, with interchangeable stainless steel wear plan, draft and idle rollers.

• Conveyor belt width 400 mm made with high thickness rubber suitable for cutting incisions.• Speed variable motorization through mechanical speed change gear.• Tools adjustment vertical and motorized by gearbox , front side horizontal and manual.• Guide-counter guide unit on transverse guides, adjustable through hand wheel with decimal

gauge.• Pressure unit with independent clamping elements, operating pressure vertically adjustable.• Singles and adjustable sprayers for tools cooling, with independent faucets.• Stainless steel working zone protection carters and water shielding.• Finishing through galvanizing and epoxies painting.• Waterproof panel, placed at the machine side, with selectors, buttons, emergency and safety

buttons.• No external sliding machine member can be damaged by corrosion.• Decimal precision of movements. • Stout and stable unit structure and slides made in foundry cast iron.

CUTTING MACHINESECO-FS 400-1T HP15 ECO-FS 400-2T HP15

Model Number: ECO-FS 400-1T Hp15 ECO-FS 400-2T Hp15

Electrical characteristics V/Hz 480/60 480/60

Installed power Kw 12 23

Dimensions mm 1300x1600 H.1600 1300x2000 H.1600

Weight Kg 400 600

Workable size: Max width mm Max 400x400 th. 30 Max 400x400 th. 30

Workable size on later roller conveyor mm n/a Max 600x600 th. 30

Working units number Nr 1 2

Working units motor 1st head Kw 11 11

Max n° of blades/head 10 10

Working units speed Rpm 3200/60Hz 3200/60Hz

Draft Motor Kw 0,55 0,55

Lifting Motor Kw 0,37 0,37

Draft Speed Mt/min 0,8-4,0 0,8-4,0

Cutting blade diameter mm 300 300

Water Consumption/Capacity Lt/min 50-60/head 50-60/head