Cut Heat Energy Cost by 50 percent , in Rubber , Adhesive tape and Flexible laminating Industry
-
Upload
shreekant-athavale -
Category
Technology
-
view
203 -
download
0
Transcript of Cut Heat Energy Cost by 50 percent , in Rubber , Adhesive tape and Flexible laminating Industry
For More InformationPlease ContactPrathith Consultants , Pune India . web : www.prathithconsultants.in, www.psadhesive.com,cell : 0091 9850242282 / 0091 7588288204
Technical Bulletin
Cut Energy Cost by 50%
Rubber IndustryThe Common Rubber Products are Molded products , Extruded products, Calendared Rubbersheets , Latex Dipped Goods
The most common Rubber processing machines used are , Rubber Mixing mill, Internal Mixer ,Extruder, Calendaring mc, etc.All these machines need Heat Source for Vulcanizing of Rubber compound.The most common Heat Source is , either Electricity , Hot Air or Steam.The required Heat Energy is Obtained by burning , most commonly used ,fuel such as , HighSpeed Diesel, Light speed Diesel , Furnace oilBut now we are in a position not only to control the fuel cost but to Save or Cut down thisburning cost almost by 50% , by making a smart choice.The answer is to switch over to Biomass Briquettes as fuel and Install Bio Mass BriquetteBoilers.
The Processing Machines
For More InformationPlease ContactPrathith Consultants , Pune India . web : www.prathithconsultants.in, www.psadhesive.com,cell : 0091 9850242282 / 0091 7588288204
Technical Bulletin
For More InformationPlease ContactPrathith Consultants , Pune India . web : www.prathithconsultants.in, www.psadhesive.com,cell : 0091 9850242282 / 0091 7588288204
Technical Bulletin
The Rubber Products
Similarly in
Adhesive Tape IndustryFor Manufacturing ,any kind of coated Products , like Adhesive Tapes, Flexible laminates, Paperproducts, RubberizedFabrics ,we have to use Various kinds of coatings , Water based , solvent based , solvent less etc.These coating generally in liquid form are applied on various substrates , by differenttechniques.
These coatings , need to be dried or cured , before rewinding.Here again the required HeatEnergy is Obtained by burning , most commonly used ,fuel such as , High Speed Diesel, Lightspeed Diesel , Furnace oilBut now we are in a position not only to control the fuel cost but to Save or Cut down thisburning cost almost by 50% , by making a smart choice.The answer is to switch over to Biomass Briquettes as fuel and Install Bio Mass BriquetteBoilers.
For More InformationPlease ContactPrathith Consultants , Pune India . web : www.prathithconsultants.in, www.psadhesive.com,cell : 0091 9850242282 / 0091 7588288204
Technical BulletinAdhesive Tape Processing
The Heating Sources
The Adhesive Tape Products
For More InformationPlease ContactPrathith Consultants , Pune India . web : www.prathithconsultants.in, www.psadhesive.com,cell : 0091 9850242282 / 0091 7588288204
Technical Bulletin
For more details please click the links pasted below.
http://www.slideshare.net/ashrikant58/use-bio-mass-fuel-save-energy-cost-4-tape-ind
http://www.slideshare.net/ashrikant58/save-on-energy-cost-in-rubber-processing