Adhesive Applications SILICONE ADHESIVE...

29
Applications Adhesive Adhesive SILICONE ADHESIVE TAPES The adhesive solutions company. Silicone Tape Products ..... for EVERY Application Splicing Tapes Adhesive Applications Silicone Splicing Tapes offer the widest variety of products for splicing applications. Self-wound or linered film tapes as well as transfer adhesives provide our customers opportunities for process optimization. Our splicing tapes are ideal for: In process splicing of silicone coated papers, films, and textiles Covering of idlers and in process rolls Label stock, adhesive transfer and other applications Aerospace Adhesive Applications Silicone Tapes are ideal for demanding and critical aerospace applications. Our silicone tapes are low outgassing and can withstand an extremely wide range of temperatures and environmental conditions. Our high performance silicone tapes are ideal for: Aerospace vehicles - both piloted as well as drones Satellites and other demanding applications Powder Coating and High Temperature Masking Adhesive Applications High Temperature Silicone Tapes can handle the heat. With excellent adhesion and high temperature resistance, our silicone tapes are ideal for: Powder coating metal components and assemblies High temperature paint masking and other demanding applications Electronics Adhesive Applications Silicone Tapes offer clean removability and a wide temperature range for demanding electronics applications. Our silicone tapes are ideal for: Printed circuit (PC) board masking and plating Print cartridge and surface protection - removes clean with no residue Flexible heating elements, wire harness wrapping and other applications Medical Adhesive Applications Silicone Tapes are highly engineered. With consistent adhesion and clean, gentle removal from skin and wounds, health care professionals and patients are assured that our silicone tapes put the patient first.....every time. Our tapes are ideal for: Skin contact dressings Surgical drapes and other critical applications • Microfluidics Applications Adhesive Adhesive The adhesive solutions company. ISO 9001 Registered Company Adhesive Applications, Inc. 41 O’Neill Street Easthampton, MA 01027 www.adhesiveapps.com +1 413 527 7120 Toll Free U.S. 800 356 3572

Transcript of Adhesive Applications SILICONE ADHESIVE...

Page 1: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

™ApplicationsAdhesive Adhesive SILICONE ADHESIVE

TAPESThe adhesive solutions company.

Silicone Tape Products.....for EVERY Application

Splicing TapesAdhesive Applications Silicone Splicing Tapes offer the widest variety of products for splicing applications. Self-wound or linered fi lm tapes as well as transfer adhesives provide our customers opportunities for process optimization. Our splicing tapes are ideal for:

• In process splicing of silicone coated papers, fi lms, and textiles• Covering of idlers and in process rolls• Label stock, adhesive transfer and other applications

AerospaceAdhesive Applications Silicone Tapes are ideal for demanding and critical aerospace applications. Our silicone tapes are low outgassing and can withstand an extremely wide range of temperatures and environmental conditions. Our high performance silicone tapes are ideal for:

• Aerospace vehicles - both piloted as well as drones• Satellites and other demanding applications

Powder Coating and High Temperature MaskingAdhesive Applications High Temperature Silicone Tapes can handle the heat. With excellent adhesion and high temperature resistance, our silicone tapes are ideal for:

• Powder coating metal components and assemblies• High temperature paint masking and other demanding applications

ElectronicsAdhesive Applications Silicone Tapes offer clean removability and a wide temperature range for demanding electronics applications. Our silicone tapes are ideal for:

• Printed circuit (PC) board masking and plating• Print cartridge and surface protection - removes clean with no residue• Flexible heating elements, wire harness wrapping and other applications

MedicalAdhesive Applications Silicone Tapes are highly engineered. With consistent adhesion and clean, gentle removal from skin and wounds, health care professionals and patients are assured that our silicone tapes put the patient fi rst.....every time. Our tapes are ideal for:

• Skin contact dressings• Surgical drapes and other critical applications• Microfl uidics

™ApplicationsAdhesive Adhesive

The adhesive solutions company.ISO 9001 Registered Company

Adhesive Applications, Inc.41 O’Neill Street

Easthampton, MA 01027

www.adhesiveapps.com+1 413 527 7120

Toll Free U.S. 800 356 3572

Page 2: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

SILICONE ADHESIVE TAPE | PRODUCT PORTFOLIO

Category Construction Color Thickness Product Code Page

SILI

CO

NE

TAPE

Single Sided Multi-purpose single sided silicone adhesive tapes balance adhesion to silicone substrates, chemical resistance and removal with no residue; cost effective with excellent tack and temperature performance.

Clear 1.0 mil PET S8511-2C 3 2.0 mil PET S8512-2C 4

Blue 1.0 mil PET S9511-2 5 2.0 mil PET S9512-2 6

Red 1.5 mil Silicone S3411-2 7 3.0 mil Silicone S580 8

Yellow 1.5 mil Silicone S5711-2 9 2.6 mil Silicone S5513 10

Green

1.0 mil PET S8511-2 11 2.0 mil PET S8512-2 12 1.5 mil Silicone S8512-2DL 13 5.0 mil PET S8515-2 14

Burgundy 1.0 mil PET S2802 15 2.0 mil PET S2822 16

Polyimide film 1.0 mil Film SP590 17 2.0 mil Film SP590-2 18

White Platers Film S583 19 Polysil Black Silicone S9911-2B 20

Double Sided High performance, high temperature, double coated silicone tapes. Excellent temperature resistance and adhesion; removes clean with no residue.

Clear 1.0 mil Silicone 1.0 mil PET 1.0 mil Silicone

S1001-1DC11 21

Green 1.5 mil Silicone 2.0 mil PET 1.5 mil Silicone

S8512-2DPDL 22

Silicone & Acrylic 60 oz/in SA1020 23 55 oz/in SA1060 24

Transfer Silicone transfer adhesives designed for high performance applications and resistance to extreme temperatures (-100°F to 500°F).

Conductive SCT20 25 1.0 mil 1.0 mil S1001-1 26 2.0 mil 2.0 mil S1001 27 3.0 mil 3.0 mil S1003 28 5.0 mil 5.0 mil S1005 29

Page 3: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S8511-2C is a clear high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S8511-2CPOLYSIL CLEAR SILICONE ADHESIVE TAPE

••••

1.50

1.00

Polyester (PET)Silicone

2.50

36

22

16825

180-60

350

0.038

0.025

0.064

10.00

624168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

3

Page 4: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S8512-2C is a high tack clear polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S8512-2CPOLYSIL CLEAR SILICONE ADHESIVE TAPE

••••

1.50

2.00

Polyester (PET)Silicone

3.50

45

38

16850

150-60

350

0.038

0.051

0.089

12.50

1077168

5

150

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

4

Page 5: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S9511-2 is a blue high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S9511-2POLYSIL BLUE SILICONE ADHESIVE TAPE

••••

1.50

1.00

Polyester (PET)Silicone (Blue)

2.50

36

22

16825

180-60

350

0.038

0.025

0.064

10.00

624168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

5

Page 6: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S9512-2 is a high tack blue polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S9512-2POLYSIL BLUE SILICONE ADHESIVE TAPE

••••

1.50

2.00

Polyester (PET)Silicone (Blue)

3.50

45

38

16850

150-60

350

0.038

0.051

0.089

12.50

1077168

5

150

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

6

Page 7: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S3411-2 is a red high tack polyester (PET) tape withcontrolled adhesion and good conformability. The controlledlevel of crosslinking assures a proper balance of adhesion tosubstrates and chemical and temperature resistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S3411-2POLYSIL RED SILICONE ADHESIVE TAPE

••••

1.50

1.00

Polyester (PET)Silicone (Red)

2.50

36

22

16825

180-60

350

0.038

0.025

0.064

10.00

624168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

7

Page 8: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S580 is a red polyester (PET) crosslinked siliconeadhesive tape with controlled adhesion and goodconformability for sharp line definition in etching and platingoperations. The controlled level of crosslinking assures aproper balance of adhesion to substrates, chemicalresistance and clean removal with no residue. The tape isunique in that the adhesive system is translucent on thepolyester and allows the operator to make precisionalignments easily.

High tack for quick adhesion

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S580POLYSIL RED SILICONE PLATERS TAPE

••••

3.00

1.00

Polyester (PET)Silicone (Red)

4.00

42

40

16825

180-60

350

0.076

0.025

0.102

11.67

1134168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

8

Page 9: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S5711-2 is a yellow high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S5711-2POLYSIL YELLOW SILICONE ADHESIVE TAPE

••••

1.50

1.00

Polyester (PET)Silicone (Yellow)

2.50

36

22

16825

180-60

350

0.038

0.025

0.064

10.00

624168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

9

Page 10: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S5513 is a yellow high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

High tack for quick adhesion

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S5513POLYSIL YELLOW SILICONE ADHESIVE TAPE

••••

2.60

1.00

Polyester (PET)Silicone (Yellow)

3.60

40

40

16825

180-60

350

0.066

0.025

0.091

11.11

1134168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

10

Page 11: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S8511-2 is a green high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S8511-2POLYSIL GREEN SILICONE ADHESIVE TAPE

••••

1.50

1.00

Polyester (PET)Silicone (Green)

2.50

36

22

16825

180-60

350

0.038

0.025

0.064

10.00

624168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

11

Page 12: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S8512-2 is a high tack green polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S8512-2POLYSIL GREEN SILICONE ADHESIVE TAPE

••••

1.50

2.00

Polyester (PET)Silicone (Green)

3.50

45

38

16850

150-60

350

0.038

0.051

0.089

12.50

1077168

5

150

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

12

Page 13: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S8512-2DL is a polyester (PET) film tape coatedwith a high temperature cross linked silicone adhesive. It islaminated to and protected by a clear PET release liner.Designed for die cutting and masking applications requiringhigh temperature resistance. The tape removes easily fromthe clear PET release liner.

High temperature resistant

Clean removal / no adhesive residue

Chemical and abrasion resistant

Ideal for die cutting, powder coating and high

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S8512-2DLPOLYSIL GREEN LINERED SILICONE ADHESIVE TAPE

••••

1.50

2.00

Polyester (PET)Silicone (Green)

3.50

44

39

16850

150-60

350

0.038

0.051

0.089

12.22

1106168

5

150

-51177

8/27/2018Rev

Polyester (PET)

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

A

13

Page 14: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S8515-2 is a green high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S8515-2POLYSIL GREEN SILICONE ADHESIVE TAPE

•••

1.50

5.00

Polyester (PET)Silicone (Green)

6.50

40

38

168125

150-60

350

0.038

0.127

0.165

11.11

1077168

14

150

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

14

Page 15: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S2802 is a burgundy colored splicing tape,formulated with a premium grade cross-linked siliconeadhesive for high initial tack on difficult to bond substrates.The tape features chemical and temperature resistance, aswell as good conformability.

Fast wet out time

High initial tack

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S2802POLYSIL BURGUNDY ULTRA TACK SILICONE ADHESIVE TAPE

•••••

2.00

1.00

Polyester (PET)Silicone (Burgundy)

3.00

40

36

16825

180-60

350

0.051

0.025

0.076

11.11

1021168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

15

Page 16: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S2822 is a burgundy colored splicing tape,formulated with a premium grade cross-linked siliconeadhesive for high initial tack on difficult to bond substrates.The tape features chemical and temperature resistance, aswell as good conformability.

Fast wet out time

High initial tack

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S2822POLYSIL BURGUNDY ULTRA TACK SILICONE ADHESIVE TAPE

•••••

2.00

2.00

Polyester (PET)Silicone (Burgundy)

4.00

48

44

16850

150-60

350

0.051

0.051

0.102

13.34

1247168

5

150

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

16

Page 17: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ SP590 offers optimum performance in electrical andthermal insulation. Continuous service temperature range is-100°F to 500°F (-73°C to 260°C) with short term, intermittentservice to 600°F (315°C). Provides clean removal in hightemperature masking applications.

High temperature resistant

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

Meets ASTM D5213 type 1 item A

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

SP590POLYSIL POLYIMIDE SILICONE ADHESIVE TAPE

•••••

1.50

1.00

PolyimideSilicone

2.50

26

22

16824

60-100

500

0.038

0.025

0.064

7.22

624168

3

60

-73260

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

17

Page 18: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ SP590-2 offers optimum performance in electricaland thermal insulation. Continuous service temperaturerange is -100°F to 500°F (-73°C to 260°C) with short term,intermittent service to 600°F (315°C). Provides clean removalin high temperature masking applications.

High temperature resistant

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

Meets ASTM D5213 type 1 item A

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

SP590-2POLYSIL POLYIMIDE SILICONE ADHESIVE TAPE

•••••

1.50

2.00

PolyimideSilicone

3.50

26

34

16848

60-100

500

0.038

0.051

0.089

7.22

964168

5

60

-73260

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

18

Page 19: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S583 is a polyester film tape coated with a whiteopaque silicone adhesive, specifically compounded to resistplating bath chemicals in solder stripping and precious metalplating of finger contacts. The tape conforms to high circuitdensity patterns to provide clean line definition and resistundercutting. The tape can be removed without leavingadhesive residue, eliminating the need for subsequentsolvent scrubbing.

High performance silicone tape

Excellent conformability

Controlled adhesion level allows clean removal

High temperature, chemical resistant silicone

Fine line definition; ideal for high density andcomplex masking

Ideal for PC board masking during plating,precious metal plating, electrical insulation andsplicing silicone coated materials

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S583POLYSIL WHITE SILICONE ADHESIVE PLATERS FILM TAPE

•••••

2.60

1.00

Polyester (PET)Silicone

3.60

20

10

16825

180-60

350

0.066

0.025

0.091

5.56

284168

3

180

-51177

8/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

A19

Page 20: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Single Coated Tape

PolySil™ S9911-2B is a black high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.

Fine line definition

Clean removal / no adhesive residue

Chemical and abrasion resistant

Good conformability

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

S9911-2BPOLYSIL BLACK SILICONE ADHESIVE TAPE

••••

1.50

1.00

Polyester (PET)Silicone (Black)

2.50

36

22

16825

180-60

350

0.038

0.025

0.064

10.00

624168

3

180

-51177

C 07/24/2018Rev

PRODUCT SPECIFICATIONS

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

20

Page 21: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Double Coated Tape with Two Liners

PolySil™ S1001-1DC11 is a polyester (PET) film supporteddouble coated silicone adhesive tape designed for highperformance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures. The silicone adhesive layers are coated onboth sides of a 1 mil PET film carrier, and protected by twofluorosilicone coated PET liners.

Bond well to many materials, including silicones

Chemical and temperature resistant

Performs in extreme temperatures

UV resistant

Passes (score 0) Primary Skin Irritation per ISO10993-10

Passes (score 0) Cytotoxicity per ISO 10993-5

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

S1001-1DC11POLYSIL DOUBLE COATED SILICONE ADHESIVE TAPE

•••••

1.00

1.00

Polyester (PET)Silicone

3.00

40

40

>168

25

180-60

350

0.025

0.025

0.076

11.11

1134>168

109

180

-51177

B 7/24/2018Rev

Polyester (PET)

1.00

Silicone

Polyester (PET)

0.025

PRODUCT SPECIFICATIONS

21

Page 22: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Double Coated Tape with Two Liners

PolySil™ S8512-2DPDL is a green, polyester (PET) filmsupported, double coated silicone adhesive tape. Theproduct is designed for high performance applicationsrequiring chemical resistance and excellent bond strength.The silicone adhesive layers are protected by twofluorosilicone coated PET liners.

Green color provides splice visibilty

Good bond strength to silicone surfaces

Clean removal without adhesive residue

Chemical and temperature resistant

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

S8512-2DPDLPOLYSIL GREEN DOUBLE COATED SILICONE ADHESIVE TAPE

••••

1.50

2.00

Polyester (PET)Silicone

5.00

40

36

>168

50

150-60

350

0.038

0.051

0.127

11.11

1021>168

219

150

-51177

B 7/24/2018Rev

Polyester (PET)

1.50

Silicone

Polyester (PET)

0.038

PRODUCT SPECIFICATIONS

22

Page 23: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Double Coated Tape with Two Liners

PolySil™ SA1020 is a double coated / double lineredpolyester (PET) tape with a silicone pressure sensitiveadhesive on one side and an acrylic pressure sensitiveadhesive on the other. SA1020 provides a solution forbonding silicone-based substrates to non-silicone materials.The silicone adhesive is designed to provide a strong bond toa variety of silicone and other low surface energy substrates,while the acrylic adhesive offers high adhesion to manymaterials.

Designed for bonding dissimilar materials

Excellent elevated temperature shear

UV and chemical resistant

Performs well in a wide temperature range

Silicone exhibits superior bonding to low surfaceenergy materials

Versatile, performance acrylic bonds to a widevariety of materials

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

SA1020POLYSIL SILICONE / ACRYLIC DOUBLE COATED ADHESIVE TAPE

•••••

2.00

1.00

Polyester (PET)Acrylic

5.00

60

48

168

25

180-40

350

0.051

0.025

0.127

16.67

1361168

109180

-40177

A 2/27/2018Rev

Kraft (White)

2.00

Silicone

Polyester (PET)

0.051

PRODUCT SPECIFICATIONS

23

Page 24: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Double Coated Tape with Two Liners

PolySil™ SA1060 is a double coated / double lineredpolyester (PET) tape with a silicone pressure sensitiveadhesive on one side and an acrylic pressure sensitiveadhesive on the other. SA1060 provides a solution forbonding silicone-based substrates to non-silicone materials.The silicone adhesive is designed for a strong bond tosilicone and other low surface energy substrates, while theacrylic adhesive offers high adhesion to a wide range ofmaterials and excellent heated shear properties.

Designed for bonding dissimilar materials

Excellent elevated temperature shear

UV and chemical resistant

Performs well in a wide temperature range

Silicone exhibits superior bonding to low surfaceenergy materials

Acrylic combines low surface energy adhesionand temperature resistance

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

SA1060POLYSIL SILICONE / ACRYLIC DOUBLE COATED ADHESIVE TAPE

•••••

2.00

1.00

Polyester (PET)Acrylic

5.00

55

54

168

25

180-40

350

0.051

0.025

0.127

15.28

1531168

109180

-40177

A 2/27/2018Rev

Kraft (White)

2.00

Silicone

Polyester (PET)

0.051

PRODUCT SPECIFICATIONS

24

Page 25: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Transfer Adhesive - Double Liner

SCT20 electrically conductive silicone transfer tape isdesigned for demanding electronics, aerospace, medical andhigh temperature applications. The unique silicone pressuresensitive adhesive (PSA) conducts electricity anisotropicallythrough the adhesive thickness.

Primarily used for EMI/RFI applications, ESD pads andflexible circuits, SCT20 offers excellent conformability. Bondswell to silicone foam, plastics, metals, glass and compositesas well as a wide range of other materials.

Electrically conductive transfer adhesive

Bonds well to low surface energy materials

Performs well in extreme temperatures

Excellent chemical resistance

Ideal for aerospace, electronics and medicalapplications

Z-axis Volume Resistivity < 4 ohm-cm

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

SCT202 MIL CONDUCTIVE SILICONE TRANSFER TAPE

•••••

PRODUCT SPECIFICATIONS

2.00

Silicone

32

14

>168-40

500

0.051

8.89

397

>168-40

260

A 8/20/2018Rev

Polyester (PET)

Polyester (PET)

25

Page 26: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Transfer Adhesive - Double Liner

PolySil™ S1001-1 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 1 mil pressure sensitivesilicone adhesive is protected by two clear fluorosiliconecoated polyester (PET) film liners. S1001-1 bonds well tometals, silicone foam, most plastics and low energy surfacessuch as polyethylene and polypropylene.

Excellent chemical resistance

Excellent bond strength

Performs in extreme temperatures

UV resistant

Passes (score 0) Primary Skin Irritation per ISO10993-10

Passes (score 0) Cytotoxicity per ISO 10993-5

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

S1001-1POLYSIL 1 MIL CLEAR SILICONE TRANSFER TAPE

•••••

PRODUCT SPECIFICATIONS

1.00

Silicone

40

40

168

-100

500

0.025

11.11

1134

168

-73

260

B 7/24/2018Rev

Polyester (PET)

Polyester (PET)

26

Page 27: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Transfer Adhesive - Double Liner

PolySil™ S1001 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 2 mil silicone adhesive isprotected by two clear fluorosilicone coated polyester (PET)film liners. S1001 bonds well to metals, silicone foam, mostplastics and low energy surfaces such as polyethylene andpolypropylene.

Excellent chemical resistance

Excellent bond strength

Performs in extreme temperatures

UV resistant

Passes (score 0) Primary Skin Irritation per ISO10993-10

Passes (score 0) Cytotoxicity per ISO 10993-5

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

S1001POLYSIL 2 MIL CLEAR SILICONE TRANSFER TAPE

•••••

PRODUCT SPECIFICATIONS

2.00

Silicone

54

40

168

-100

500

0.051

15.00

1134

168

-73

260

B 7/24/2018Rev

Polyester (PET)

Polyester (PET)

27

Page 28: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Transfer Adhesive - Double Liner

PolySil™ S1003 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 3 mil silicone adhesive isprotected by two clear fluorosilicone coated polyester (PET)film liners. S1003 bonds well to metals, silicone foam, mostplastics and low energy surfaces such as polyethylene andpolypropylene.

Excellent chemical resistance

Excellent bond strength

Performs in extreme temperatures

UV resistant

Passes (score 0) Primary Skin Irritation per ISO10993-10

Passes (score 0) Cytotoxicity per ISO 10993-5

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

S1003POLYSIL 3 MIL CLEAR SILICONE TRANSFER TAPE

•••••

PRODUCT SPECIFICATIONS

3.00

Silicone

64

40

168

-100

500

0.076

17.78

1134

168

-73

260

B 7/24/2018Rev

Polyester (PET)

Polyester (PET)

28

Page 29: Adhesive Applications SILICONE ADHESIVE TAPESadhesiveapps.com/wp-content/uploads/2018/08/Silicone-Tape-Portfolio.pdfadhesive tape with controlled adhesion and good conformability for

Transfer Adhesive - Double Liner

PolySil™ S1005 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 5 mil silicone adhesive isprotected by two clear fluorosilicone coated polyester (PET)film liners. S1005 bonds well to metals, silicone foam, mostplastics and low energy surfaces such as polyethylene andpolypropylene.

Excellent chemical resistance

Excellent bond strength

Performs in extreme temperatures

UV resistant

Passes (score 0) Primary Skin Irritation per ISO10993-10

Passes (score 0) Cytotoxicity per ISO 10993-5

PRODUCT DESCRIPTION FEATURES & BENEFITS

PRODUCT CONSTRUCTION

Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.

S1005POLYSIL 5 MIL CLEAR SILICONE TRANSFER TAPE

•••••

PRODUCT SPECIFICATIONS

5.00

Silicone

76

40

168

-100

500

0.127

21.12

1134

168

-73

260

B 7/24/2018Rev

Polyester (PET)

Polyester (PET)

29