CUSTOMER-ORIENTED - Electronics & Appliances: · PDF fileCUSTOMER-ORIENTED “Customer ......
-
Upload
nguyenkhanh -
Category
Documents
-
view
220 -
download
4
Transcript of CUSTOMER-ORIENTED - Electronics & Appliances: · PDF fileCUSTOMER-ORIENTED “Customer ......
UNIQUE SOLUTION FOR OPTICAL COMMUNICATION NETWORKAt Samsung we are committed to continuously advancing technology in fixed and mobile networks. Our in-depth understanding of future directions enables us to provide optimized network solutions that help carriers adapt to today's challenging network economics, with diverging ARPU and usage curves. It also ensures that we can offer fast development cycles and bring new technologies and solutions to market more rapidly, providing the most reliable performance, compatibility, and cost-effective longevity for the full range of applications.
• Cell Site Interconnectivity Solution
• Air Blown Cabling Solution
• Indoor Micro Cable Solution
• FTTH Solution
Cell Site Interconnectivity SolutionAs smartphone penetration continues to climb in today’s global mobile tele-communications networks, carriers must invest in 3G capacity upgrades and 4G deployments. They need to find reliable and cost-effective solutions that support high-efficiency signal transmission in conjunction with CAPEX/OPEX savings. Samsung's Cell Site interconnectivity solution dramatically simplifies and reduces the cost of upgrade or replacement of traditional base station configurations with the latest distributed base station architectures.
Air Blown Cabling SolutionIn general cable pulling installation, friction force between optical cable sheath and duct wall causes increase of pulling force exponentially and results in cable failure due to overwhelmed pulling force.Especially in bending points, very high friction forces which dramatically decrease the installation distance. Alternatively air blowing installation, there is a plenty of air originated by compressor or other equipment which makes the cable float in the duct and reduces friction forces between two materials, which results in longer installation distance.
Indoor Micro Cable SolutionToday, in living unit residents, both owners and renters, desire FTTH service, because FTTH clearly adds value to a property. yet it's been slow in coming to older properties because of concerns about cost, disruption and aesthetics. Samsung has developed a better solution to deploy fiber in living units to respond to several of the deficiencies of traditional deployment methods. This new solution makes FTTH deployment in living units fast, easy and low-cost. Above all, this new solution is virtually invisible, greatly reducing or eliminating the visual impact of installed fiber.
FTTH SolutionAs fiber optic technology becomes more advanced-and its benefits more widely known-the range of application areas using that technology is growing rapidly. As a global technology leader, Samsung has a great deal of experience in many projects and offers a suite of solutions for Fiber-To-The-Home Service. Being assigned to work closely with customers and suppliers to continuously develop the most innovative products and provide our customers with the best FTTH solutions for the next generation of optical communication networks.
CUSTOMER-ORIENTED“ Customer suggestions, complains or any other feedback is
given the highest consideration.”
30 31
FTTA/PTTA Solution hTTA SolutionOPTICAL CONNECTOR POWER CONNECTOR
DigitalUnit
Distribution Enclosure
DigitalUnit
Hybrid Cable (Power+Optic)
Remote Radio Head
Antenna
Power CableOptical Cable
The incessant demand for increased wireless network capacity and service reliability has driven the replacement of coaxial cabling to fiber-based architectures. First-generation architectures use discrete fiber and power cables installed separately on the tower, the main benefit of this solution is that this is the simplest technology. Unlike discrete cabling, trunk and hybrid cabling methods involve break-out points on the tower where individual fibers and power conductors split out from the cable to connect to each individual RRH. Especially the hybrid fiber-power cables can provide greater flexibility for future enhancements while potentially lowering capital expenditure and labor costs over time.
FTTA/PTTA Solution|Fiber/Power To The Antenna
We have two ways to provide the solution for FTTA/PTTA: a discrete cable being used to feed single RRH and trunk cable for multiple RRHs solution. The main advantage of our FTTA/PTTA solution is the ease of installation meaning that it is a space-saving, lightweight, and compactness.
DC1|Discrete Cable Solution
Samsung's Discrete Cable Solution is single runs of fiber and power cable pairs directly from the DU to each RRH, it could be said that this installation method is the simplest. In many RRH network structures, the vast majority of RRHs have been supplied with discrete cables. It can be delivered as a pre-installed solution for easy connections between the DU and RRHs.
POWER CABLE• Weather resistance (IP rating)• High crush and UV resistance• IEC / UL Compliant
DISTRIBUTION POINT• �High mechanical strength against impact• 1 feeder and multiple distribution cables• Weather resistance (IP rating)
RRH CONNECTIONVarious types of commercial connectors are available upon your request (IP connector, etc.)
CABLE CONSTRUCTION
OPTICAL CABLE• Up to 8 fibers• �Available in superior bend performance fiber (Samsung's Ultra BendfreeTM)• Weather resistance (IP rating)• High crush and UV resistance
TC1|Trunk Cable Solution
Samsung's Trunk Cable Solution covers multiple RRHs; it split into multiple cables at robust distribution points. It is eliminating the need for multiple cable runs and reducing weight and wind load burdens while reducing tower leasing costs.
Cell Site Interconnectivity SolutionFLUIDIC CONNECTION BETWEEN RRh AND DU WITh ONE-STOP SOLUTION
Antenna
Remote Radio Head
Optical CablePower Cable
RRH connection part DU connection part
SheathAL conduitInner jacketSteel wireOptical fibersCable sheath
Optical Cable
Sheath
Filler
Conductor
Insulation
Wrapping film
Power Cable
Optical Cable Power Cable
Termination
Distribution Point
RRH
DU
Optical Cable Power Cable
Termination
RRH
DU
32 33
Optic
Power
Optical Cable
Power Cable
RRH
Optic
Power
JUMPER CABLE • �Optic and Power Connection from the Distribution Enclosure to RRHs
• � Pre-installed in distribution enclosure for simple and fast installation
• � Factory-assembled cables for a fast on-site installation
• �Flexibility with small bending radius and excellent cable routing properties
• �Equipped with customer specific power and fiber-optic connectors
• �Available with weather proof type connectors (Optical, Power)
DISTRIBUTION ENCLOSURE• �Ruggedized and robust architecture
Weather Proof (Option: IP rating)
• �Jumper cables and feeder cables are pre-connected to distribution enclosure for the efficient installation
• �Designed to cover up to 4 RRHs (more RRHs on request)
hYBRID FEEDER CABLE • �Combine fiber/power cables into one hybrid cable for lighter burden
• �Pre-fabricated cable covers up to 4 RRHs (more RRHs on request)
• �Harsh environments protection (e.g. Birds, Rodents, Weather, etc.) Option: corrugated aluminum armor
• �Cable cut to site length
REMOTE RADIO hEAD (RRh) CONNECTION• �Jumper cables are connected to RRHs, which are terminated with
RRH compatible interfaces
DIGITAL UNIT (DU) CONNECTION• �Pre-connectorized hybrid feeder cable compatible with customer
specific DU interfaces in protective cabinets
• �Passive components packages for DU connection are available (e.g. Optical distribution frame, Ground Kits, Inspection kits, etc.)
A1| All-in-One body type
Type A1 is the most efficient RRH connection solution in terms of ease of installation, cost and limited space on the mast. To simplify installations, whole solution from DU to RRH connection part is preconnected all-in-one including distribution enclosure seamlessly. It is a true PLUG & PLAy.
PowerConnectors
Optical FiberConnectors
Jumper Cable
Distribution Enclosure
Weather proof type connector
or
JUMPER CABLE • Optic and Power Connection from the Distribution Enclosure to RRHs
• Easily add/install jumper cables for a future expansion
• Factory-assembled cables for a fast on-site installation
• �Flexibility with small bending radius and excellent cable routing properties
• Equipped with customer specific power and fiber-optic connectors
DISTRIBUTION ENCLOSURE�• ��Ruggedized and robust architecture
Weather Proof (Option: IP rating)
• Available Hybrid connector (water and dust protection)
• Designed to cover up to 4 RRHs (more RRHs on request)
• �One Touch Connection between jumper and the distribution enclosure (No need to open it for repair or replacement, just plug the jumper cables)
• Easy mount with included hardware
hYBRID FEEDER CABLE • Combine fiber/power cables into one hybrid cable for lighter burden
• Pre-fabricated cable covers up to 4 RRHs (more RRHs on request)
• �Harsh environments protection (e.g. Birds, Rodents, Weather, etc.)Option: corrugated aluminum armor
• Cable cut to site length
R1| Replaceable body type
Type R1 is designed to provide maximum flexibility at installation, ongoing expandability and reliability long after installation is completed. you can simply connect more jumper cables from the saved Hybrid sockets to additional RRHs later as capacity growth dictates.
Optic
Power
Hybrid Connectors
Power Connector
Frame Ground
Optical Fiber Connectors
Y-branch
* Drawings are not to scale
* Specifications can be customized upon request
hTTA Solution|Hybrid (Optic/Power) To The Antenna
Samsung HTTA Solution dramatically simplifies and reduces the cost of upgrade or replacement of traditional base station configurations with the latest distributed base station architectures. It provides a fluid interconnection from the Digital Unit (DU) cabinet to the Remote Radio Head (RRH) with a factory assembled end-to-end solution of optical and fiber cables and a distribution enclosure. It helps you lower the effort and cost of installation with minimal impact at the tower.
34 35
FastBlowTM
Samsung's FastBlowTM using 250 μm coated fiber is lightweight with small diameter and designed to be blown into a micro duct by air-blown installation. The lightweight, flexible design of cable can also save time and costs with fast and easy installation. It also helps service providers to reduce their initial network build investment by deploying fiber only as needed to meet demand.
• Up to 288 fibers• Easy and rapid installation no needs to open sidewalks• Range of cable designs and sizes to suit a variety of duct size• Robust for handling in the field and easy access and breakout of fibers• Compactness: Small diameter, light weight cables
MEChANICAL PERFORMANCE Fiber count 12 ~ 72 84 ~ 96 144 192 288
Fibers per tube 12 12 12 24 24 12 24
Nominal outer diameter (mm) 5.6 6.5 8.6 7.9 9.4 11.1 12.4
Nominal cable weight (kg/km) 27 36 64 50 72 99 121
Maximum tensile strength (N) 500 700 1,000 1,000 1,000 1,000 1,000
Maximum crush resistance (N/10 cm) 500 500 500 500 500 500 500
FastBlow+TM (with 200 μm coated fiber)
NEW DESIGN CABLE WITh 200 MICRON FIBERS FOR BEST PERFORMANCESamsung's FastBlow+TM is applied with 200 μm coated fiber instead of the more standard 250μm.The 200 μm coated fibers require 36 percent less space than conventional 250 μm coated fibers, enabling reduced diameter cables with a higher fiber count per tube. It can potentially reduce fiber optic network build costs by increasing installation distance, reducing the number of installations, and maximizing the use of congested and limited availability ducts.
• Up to 288 fibers• Higher-density cable for cost-effectiveness• Smaller diameter with 200 μm coated fiber compared to conventional fibers• Light weight for easy to handle to provide longer blowing distances• More cables can be deployed in a given duct
MEChANICAL PERFORMANCE Fiber count 12 ~ 72 84 ~ 96 144 192 288
Fibers per tube 12 12 12 24 24 12 24
Nominal outer diameter (mm) 5.2 6.0 7.9 6.9 8.0 10.4 10.7
Nominal cable weight (kg/km) 22 32 56 40 53 88 96
Maximum tensile strength (N) 500 500 1,000 1,000 1,000 1,000 1,000
Maximum crush resistance (N/10 cm) 500 500 500 500 500 500 500
Gel-filled buffer tube Colored optical fiber Dielectric central member Water swellable yarn Rip cord Outer PE jacket
* Drawings are not to scale
92 Fibers
EASE OF hANDLINGIt allows ease of handling and installation, as it provides significantly reduced dimension and light weight cable design be installed in each micro duct
EFFICIENT USE OF DUCTIt allows to improve the density of cable in limited duct space, as it designed to significantly save the dimension and ultra-lightweight
IMPROvED BLOWING PERFORMANCEIt designed to decrease the friction force between cable and duct wall for optimum blowing performance
FastBlowTM Air Blown Micro CableSamsung's FastBlowTM Air Blown Micro Cables are ultra-lightweight with small diameter and designed for metro feeder or access network to be blown into a micro duct by air-blown installation. As the cable allows the deployment of currently required fiber count, the micro cables provide a lower initial investment and the flexibility to install and upgrade to the latest fiber technologies after the initial installation.
Air Blown Cabling SolutionMOST ADvANCED AND COST EFFECTIvE SOLUTION Samsung’s Air Blown Cabling Solution enables quick and easy incremental installation of cables by air blowing. It provides a lower initial investment and the flexibility to install and upgrade to the latest fiber technologies after the initial installation. The Samsung's Air Blown Cabling Solution consists of FastBlowTM Air Blown Micro Cables, Micro ducts and Components.
COST-EFFECTIvEOur solution also helps service providers to reduce initial investment and flexibility to install and upgrade to the latest fiber technologies after the initial installation
FIELD PROvENWe are dedicated to provide second to none products to our customers and our sophisticated quality management system ensures that we can make 'Zero Defect ‘products
hIGh-PERFORMANCEOur unique design provides and highly reliable blowing performance and this lightweight cable offers durability and flexibility
Air Blown Micro Cable Micro Duct Component
OPTICAL PERFORMANCE
Wavelength (nm) Attenuation (dB)
1310 Max. 0.35
1550 Max. 0.22
* Samsung WidepassTM Compliant (ITU-T G.652.D)
ENvIRONMENTAL PERFORMANCE• Minimum bending radius - Short term: 15 * Outer diameter- Long term: 10 * Outer diameter
• Temperature- Operation: -20˚C to +70˚C- Storage / Transport : -30˚C to +70˚C- Installation: -10˚C to +50˚C
* Tested in accordance with IEC 60794-1
NOTE• Fiber colors by IEC60304 - Blue /
Orange / Green / Brown / Grey / White /Red / Black / Yellow / Violet / Pink / Aqua
• Diameter represents a nominal value and may vary by ±5%
• Sheath marking legend - hot foil stamp (indented)
Ex) Manufacturing year (ex. 2013) Samsung RM SM 24 = length marking =
192 Fibers
Using 250 μm coated fiber
Using 200 μm coated fiber
192 Fibers
Save over 30%
36 37
INDOOR MICRO CABLE SOLUTION
SAMSUNG OFFERS INNOvATIvE SOLUTION FOR FTTh DEvELOPMENTINVISIATM is an innovative micro drop cable solution that allows service providers to bring FTTH service to existing living units/offices in a faster and easier fashion. INVISIATM reduces a carrier's installation costs and minimizes the disruption and aesthetic dissatisfaction often associated with retrofitting service cables in existing living units.
Plate corner clip
Plate corner clip
INvISIATM Cable• 900 μm round type• Applying for Samsung Ultra BendfreeTM
• Transparent color• Hard and Resilient buffer material• Environmentally and Mechanically stable
Corner Clip• Plastic (Flame retardant)• Double side adhesive tape• Transparent color• Grip cable• Cable can be side in/out
Epoxy Glue• Natural harden material • Supporting adhesion of
cable on surface• Flame retardant
Plate corner clip
Edge corner clip
Straight clip
Edge corner clip
Inside corner
Conventional Cable
INVISIATM Cable
Inside cornerOutside corner
Epoxy glue or Straight clip
INVISIBLE, FAST, SIMPLE.the ultra bend insensitive fiber and corner clips
DI (Direct Install)
Micro DuctSamsung’s Micro duct is small size, light weight with low friction performance suitable for micro cable and fiber blowing. It can be installed in narrow duct space of existing buildings and we can provide various types of ducts.
• Various types of micro duct - Thick walled, Direct Buried, Direct Bury Reinforced, Direct Installed, Low smoke Zero Halogen, Aerial, etc. - 1, 2, 4, 7, 12, 19, 24 distribution
• Duct size: Suitable for various cable diameters (Out/In) 5.0/3.5 7.0/3.5 7.0/5.5 8.0/6.0 10.0/8.0 12.0/8.0 12.0/10.0 14.0/10.0
• Low friction coefficient material
• Low friction treatment
ComponentMicro Duct ClosureWater proof closures are designed for blown fiber tube cable connection applications. A micro duct can be easily connected and distributed from the closure with the use of the connecting side ports. It is a direct bury sealed closure designed for intercepting a micro duct assembly to allow multiple spur-offs to smaller blown fiber tube cables or ducts.
• High strength plastic for impact and durability• Installation: Direct Bury, Aerial, Trench etc.• Easy maintenance and reassembling• Dust and water proof
ConnectorSTRAIGhT CONNECTORA connector is a clip-in duct connector used for jointing two micro ducts. It is transparent to allow a visual inspection of a micro cable passing through. To enable cable blowing, the connector is designed to operate at 15 bars without leakage.
ENDCAPEnd caps are used to tighten the ends of unused primary tubes to avoid water and dust from emerging into ducts. They are also used in combination with the valve end stop connector during installation of micro ducts into existing cable ducts.
REDUCING CONNECTORPush-fit reducing connectors make micro duct splicing fast and easy. The reducers can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.
GAS BLOCkGas Block Connectors are used when it is necessary to block moisture (avoiding condensation) or to block gas passing freely into different micro duct sections. This could be necessary when changing from outdoor to indoor installation.
LSZH DBR Thickwalled Aerial Duct
DB (Direct Buried)
Outer sheath (MDPE or LSZH) Aluminium layer Micro tube Inner sheath (MDPE) Outer sheath (HDPE) Aluminium layer
38 39
FTTH Solution
Highly reliable, field proven quality productsReduce initial costs and control on-going investmentDesign and development always in time as per customer's request
Indoor Termination BoxCustomer Termination Box(Hybrid_Optic/UTP)
Customer Termination Box(Optic)
Outdoor Termination Box(Mid-span branch)
OPTICAL TERMINATION BOx (OTB)Samsung's Optical Termination Box (OTB) is mounted to in & out side wall of building or pole to distribute and connect optical cable for distribution of subscriber. It is designed with controls that maintain the fiber bending radius throughout the unit on the segregated customer and provider sides. For convenient cable management, they provide termination, splicing and storage functions for fiber optic cable systems.
- Engineered fiber routing protects bending radius throughout the unit to ensure signal integrity- Enough work space for efficient splicing or adaptor patching- Convenient access for installation, maintenance and subsequent termination- Customized design product is available upon request
Virtually invisible installation INVISIATM is the best solution to fulfill occupants' expectation with minimum damages to the interior design
Cost innovationINVISIATM provides low maintaining/installation cost due to pathway management tool kit with simple and long lasting installation performance
Almost everywhere installation INVISIATM can be installed in various surfaces of wall such as wood molding, sheet rock, concrete board, plastic and etc.
Easy-to-install by one personINVISIATM can be installed faster and easier by one person using pathway management tool kit
Guaranteed performance INVISIATM provides high performance with Ultra Bend-Insensitive fiber and pathway management tool kit
Eco-friendly INVISIATM fully complys with Restriction of Hazardous Substances Directive ‘RoHS’
What are the recommended installation conditions?INVISIATM can be installed almost EVERYWHERE. With its strong adhesive performances, Corner clips are able to easily stick to most surfaces including wood, sheetrock, concrete, and plastic while maintaining its adhesiveness. When looking closely at INVISIATM installation, the surfaces and corners are very neat without any traces of installation since the cables are thin and transparent. Also, no traces can found either when wallpaper is applied. The cable fits easily inside moldings and can also be neatly installed down the edges of bookcases or furniture. It is possible to install the cable in various ways.
Would the interior design remain seamless after the installation?yes. As the name implies, INVISIATM blends into any wall surface (painted or not), making it nearly unnoticeable to the untrained eye. This solution eliminates the need for drilling and fishing cables which is often expensive and time consuming for carriers. In addition, INVISIATM does not require any mechanical fasteners which may damage the interior finish of the living unit.
INVISIBLE SOLUTION, VISIBLE VALUEINVISIATM consists of a new 900 μm drop cable with Samsung Ultra BendfreeTM (G.657.B3), the most advanced bend resistant fiber. The translucent cable is easily attached to a variety of wall surfaces using 2 types of simple and discrete corner clips. The pathway management tool kit provided with INVISIATM includes a variety of these clips along with a small tube of specially formulated epoxy which can be applied at discrete points along the cable or smeared like painters caulk, resulting in a truly invisible installation that may be painted by the homeowner if desired.
vERTICALLY INTEGRATED FTTh SOLUTIONSSamsung has end to end solutions from Backbone to FTTH applications including passive accessories, enabling Samsung to provide high quality consistency and efficiency. We also focus on VALUE ENGINEERING providing cost effective products while allowing for Beyond Value Creation to the customer.
4140
Drawer-type
SC / APC-type
FIBER DISTRIBUTION hUBThe Fiber Distribution Hub (FDH) provides everything necessary to manage distribution fibers for an outside plant FTTH application. FDH can accommodate trays for splitter modules, they provide termination and storage functions.
Module case-type Optical Splitter
In-line type
FIBER SPLICING CLOSURESamsung’s Fiber Splicing Closure protects fiber optic splice while providing fast and easy no-cost reentry. It is installed on wires, in manholes, in ducts, and mounted on poles.
- Dome type, In-line type
FIBER DISTRIBUTION FRAME (FDF)Fiber Distribution Frame (FDF) provides efficient cable connections between outside plant cable and equipment in the buildings and communication facilities.
- Drawer type, Swing door type, Panel type
CABINET RACkCabinet Rack is designed for fixing the ODF or other transmission equipment for providing splicing, distribution andstorage function.
PRE-TERMINATED CABLEPre-terminated cable provides easy interconnections in transmission equipment, distribution panels, equipment and Multi-Dwelling Unit.- Various type of connectors can be connected upon your request
OPTICAL JUMPER CORDSamsung provides various types of optical patch cords and pigtails designed to meet the required specifications for today’s optical communication systems. Based on advanced and highly reliable technology, Samsung offers diverse solutions for optical connections with basic products such as SC, LC, FC, ST and its hybrid version.- Various diameter of cable available upon your request (0.9, 2.0, 2.4, 3.0, etc.)
FIELD ASSEMBLY CONNECTORField Assembly Connector can be assembled easily and quickly in the field without the additional assembling tools.- SC/APC type, SC/PC-type
With fan-out and connector
OPTICAL SPLITTERSingle Mode 1×N and 2×N Splitters divided uniformly optical signals from input ports to multiple outputs. Splitter can also be operated in the reverse direction to combine multiple wavelengths into one fiber. Splitter is used in distribution equipment like FTTH Ethernet PON (Passive Optical Network) system.
- Low insertion loss and high reliability compact packaging- Up to 64 outputs standard- Available in 1×N and 2×N configurations- Available with various types (e.g. Without connector, With fanout and connector, Cassette)
SC-type
42