Cursos

THE CORROSION SOCIETY

It’s More Than A Class, It’s A Career.

TRAINING &CERTIFICATION

GUIDE

2013

Periodicals Supplement to Material Performance November 2012 Issue

In today’s working environment, continuous learning and professional development

are required to stay competitive and abreast of new developments. This is especially so

in the field of corrosion, an industry that is based around technology and innovation.

Continued education through NACE is an investment in your career that offers many

tangible benefits.

A NACE course can launch a new career, broaden your area of expertise or be used as

a refresher for any one element of your work. It can demonstrate your commitment to

your profession, show continued mastery of your field and offer greater recognition

and credibility from your peers, within your company or in today’s competitive job

market.

NACE is your place to turn to in achieving your career goals. Our courses are designed

for continued, career long professional development and may be taken as stand-alone

training or as part of the path toward achieving certification. NACE credentials are the

ultimate proof of competence in the corrosion industry and we look forward to seeing

you in a career-building class this year.

It’s More Than A Class, It’s A Career.

1www.nace.org/education 1

Table of ContentsGeneral Education Courses

Basic Corrosion .............................................................................3Basic Corrosion on CD .................................................................3Corrosion Control in the Refining Industry ...............................4Designing for Corrosion Control .................................................4Offshore Corrosion Assessment Training (O-CAT) ............5, 35Corrosion in the Water and Wastewater Industry ............5, 36

Coating Inspector Program (CIP)CIP Level 1 ......................................................................................7CIP Level 2 ......................................................................................7CIP Level 3 Peer Review ..............................................................8

CIP Exam CoursesCIP Level 1 Exam Course .........................................................9CIP Level 2 Exam Course .........................................................9

CIP Specialty CoursesCIP Level 2, Maritime Emphasis .....................................10, 35Nuclear Power Plant Training for Coating Inspectors .....11CIP One-Day Bridge Course ..................................................12

General Coatings CoursesPipeline Coating Applicator Training .......................................14Coatings in Conjunction with Cathodic Protection .........14, 26Coating Inspector Program (CIP) .........................................7, 14Shipboard Corrosion Assessment Training (S-CAT) .......15, 35

Protective Coatings Specialist ProgramPCS 1 Basic Principles ...............................................................15PCS 2 Advanced ..........................................................................16PCS 3 Management ....................................................................16

I.C.I. Online—Intro to Coating Inspection .........................17, 37

Cathodic Protection (CP) ProgramCP 1—Cathodic Protection Tester ...........................................19CP 2—Cathodic Protection Technician...................................20CP 3—Cathodic Protection Technologist ...............................21CP 4—Cathodic Protection Specialist ....................................22

CP Exam-Only OptionCP 1—Cathodic Protection Tester Exam-Only ...................23CP 2—Cathodic Protection Technician Exam-Only ..........23CP 3—Cathodic Protection Technologist Exam-Only .......24CP 4—Cathodic Protection Specialist Exam-Only ............24

CP Specialty CoursesCP 2—Cathodic Protection Technician-Maritime .......25, 35Coatings in Conjunction with Cathodic Protection ...........26CP Interference .......................................................................26

Pipeline Industry ProgramsNACE Operator Qualification Program (OQ) .....................29, 36Pipeline Coating Applicator Training .................................14, 29Cathodic Protection (CP) Program .....................................18, 29

Internal Corrosion ProgramInternal Corrosion for Pipelines—Basic ............................30Internal Corrosion for Pipelines—Advanced ....................30

Internal Corrosion Exam-Only OptionInternal Corrosion for Pipelines—Basic Exam-Only ........31Internal Corrosion for Pipelines—Advanced Exam-Only ....31Internal Corrosion Specialist Certification ...................31, 53

Pipeline Corrosion Integrity Management ProgramPipeline Corrosion Assessment

Field Techniques (P-CAFT) .............................................32In-Line Inspection ................................................................32Direct Assessment ...............................................................33Pipeline Corrosion Integrity Management (PCIM) .........34

Marine Industry CoursesCIP 2, Maritime Emphasis ....................................................10, 35CP 2–Cathodic Protection Technician-Maritime .............25, 35Offshore Corrosion Assessment Training (O-CAT) ............5, 35Shipboard Corrosion Assessment Training (S-CAT) .......15, 35

Online, Self-Study TrainingI.C.I. Online—Intro to Coating Inspection .........................17, 37NACE Operator Qualification Program (OQ) .....................29, 36Corrosion in the Water and Wastewater Industry ............5, 36

On-Site TrainingInformation ...................................................................................28

CertificationCertification Paths and Requirements ....................................39Renewing Your Certification......................................................48Frequently Asked Questions .....................................................49

Administrative InformationCourse Registration Fees ..........................................................50Important Information ................................................................51How to Register for a NACE Course ........................................52

2 www.nace.org/education

GENERAL EDUCATION

G E N E R A L E D U C AT I O NNACE offers a variety of learning opportunities that can lead to career ad-vancement through enhancing your skills and knowledge related to on-the-job performance. These courses have been designed to train a wide range of stu-dents, including management, engineers, field personnel, and sales profession-als, regardless of the individual’s experience level.

Our courses have been developed and refined by subject matter experts with decades of knowledge and expertise. Courses vary in length from week-long intensive study to one-day specialty courses.

For students who are new to the field of corrosion, the Basic Corrosion course provides a solid foundation toward a comprehensive career in corrosion. The course serves as an entry point to other NACE courses and certifications allow-ing the student a path for continued career-long professional development that can open the doors to more job opportunities and greater earnings potential.

3www.nace.org/education

GENERAL EDUCATION

Basic Corrosion5-Day Classroom Course 1st to 4th days: 8 a.m. to 5 p.m. 5th day: 8 a.m. to 2 p.m., unless otherwise noted

Description The Basic Corrosion course focuses on corrosion and the potential problems caused by corrosion. It covers a basic but thorough review of causes of corrosion and the methods by which corrosion is identified, monitored, and controlled. Ac-tive participation is encouraged through hands-on experiments and case studies, as well as an open discussion format. The course concludes with a written ex-amination at the end of the week.

Who Should Attend Anyone who needs the ability to recognize corrosion and un-derstand its devastating potential, especially as it relates to his or her area of responsibility. This includes:• Anyone desiring a basic understanding of corrosion• Technicians• Salespersons• Inspectors• Managers• Engineers

Prerequisites Previous training in corrosion control is not required to take this course. However, a basic understanding of science and chem-istry is recommended to gain the most value from this course.

Course Highlights (including but not limited to) • The forms of corrosion, how to recognize each form and the

specific mechanisms that results in each form• Electrochemical processes and concepts• Corrosive characteristics of commonly-encountered

environments• Engineering materials and their relationship to corrosion

control• Corrosion control by design, materials, modification of

environment, cathodic and anodic protection and protective coatings

• Corrosion testing and monitoring using inspection, specimen exposure, electrochemical methods, water chemistry and analysis of deposits

Fees Advanced RegistrationMember—$1,025 Nonmember—$1,230

Standard RegistrationMember—$1,210 Nonmember—$1,395

Parallel Path to Certification for• Corrosion

Technician• Corrosion

Technologist• Senior Corrosion

TechnologistSee pages 46-47 for details.

Reference Materials Included with Course Registration Fees Student receive the following materials on site:• Student study manual• Corrosion Basics—An Introduction, Second Edition

3.6 CEUs

Basic Corrosion Course on CDA Self-Paced, Home-Study Format

Description The Basic Corrosion course on CD contains the same tech-nical content as the classroom course and is presented in a user-friendly, self-study format. To successfully complete the self-study version of Basic Corrosion, you must pass a written examination within six months of receiving the CD.

The exam is a proctored test that must be taken in person with a NACE-approved proctor. To meet this requirement, NACE has provided three easy options from which to choose. Option 1: Take the exam in your geographic area under the supervision of an approved NACE proctor. Option 2: Take the exam at NACE’s Training Center in Houston, Texas. Option 3: Take the exam at any scheduled class on the final day of the course. (Go to www.nace.org for an updated course schedule) Please make arrangements in advance to take the exam through NACE on your desired test date. Once you have passed the exam, you will receive your certificate of course completion by mail.

System Requirements for CD• Operating System: Windows Operating System required• Processor: Pentium (or equivalent) with 12 MB of RAM• Memory: 300 MB hard disk space (80 MB for minimum

installation)• Hardware: CD-ROM drive, video card, Super VGA monitor

FeesSingle User LicenseMember—$975 Nonmember—$1,155

5-User LicenseMember—$3,075 Nonmember—$3,610

Reference Materials Included with CD PurchaseThe following materials are included with the Basic Corrosion CD:• Instruction booklet• Student study manual• Corrosion Basics—An Introduction, Second Edition


GENERAL EDUCATION

Corrosion Control in the Refining Industry5-Day Classroom Course1st-4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThe Corrosion Control in the Refining Industry course provides an overview of refinery process units and specific process descrip-tions. It also focuses on the examination and identification of met-allurgical problems that occur in process units. Students receive a complimentary one year subscription to the most recent version of REFIN•COR, which is an online software database of experiences, problems, and solutions encountered by refining industry corro-sion engineers and includes minutes of meetings of NACE Commit-tee TEG 205X (formerly T-8) on Refining Industry Corrosion from the inception. This is information which can be used on-the-job and cannot be found anywhere else.

Who Should AttendThis course is geared toward those with a minimum of 1-2 years of experience in refineries including: design engineers, pro-cess engineers, procurement agents, and maintenance plan-ners, service company representatives who support refineries, corrosion and equipment engineers, metallurgists, inspectors, and inspection supervisors.

PrerequisitesNo prior training is required, but 1-2 years of work experience is recommended.

Course Highlights (including but not limited to)• Refinery operations and its interactions with corrosion• Materials of construction for refinery applications• Refinery units/processes—corrosion and other failures,

crude distillation/desalting, fluid catalytic cracking unit, cracked light ends recovery units, hydrofluoric acid alkylation units, sulfuric acid alkylation units, hydroprocessing units, catalytic reforming, delayed coking units, amine units, and sulfur recovery units

• Corrosion monitoring methods in refineries• Refinery injection systems• Process additives• Failure analysis in refineries

FeesAdvanced RegistrationMember—$1,795 Nonmember—$1,980


Reference Materials Included with Course Registration Fees• Students receive the REFIN•COR software online.

Designing for Corrosion Control5-Day Classroom Course1st-4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThe Designing for Corrosion Control course reviews the principles of cor-rosion and corrosion control and pro-vides a systematic method for applying the technology of corrosion prevention to the design process. It offers an over-view of the steps involved in materials selection common to many industries. It also covers corrosion control in system design and the financial principles used in evaluating alternative materials and designs. The course con-cludes with a written exam at the end of the week.

Who Should AttendAnyone who has a technical corrosion background but is new to design including: civil, mechanical, design, and process en-gineers, consultants, contractors, and architects.

PrerequisitesNo prior training is required. However, for those with a limited corrosion background, the NACE Basic Corrosion course is recommended prior to taking this course.

Course Highlights (including but not limited to)• Corrosion control and its importance in the design process• Matching materials performance to service environments• Materials selection (process, methodologies, and factors

influencing materials selection)• Effects of corrosion and design on materials• Optimization of design• Economic considerations and analysis



Reference Material Included with Course Registration FeesStudents receive the following guide on-site:• Fundamentals of Designing for Corrosion Control:

A Corrosion Aid for the Designer• DCC manual for course kit use

3.6 CEUs

Parallel Path to Certification for• Senior Corrosion

TechnologistSee page 47 for details.


GENERAL EDUCATION

Offshore Corrosion Assessment Training (O-CAT)5-Day Classroom Course1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThe Offshore Corrosion Assessment Training course is an intense five-day program addressing the elements of in-service inspec-tion and maintenance planning for fixed offshore structures. The course also focuses on the Bureau for Safety and Environmental Enforcement (BSEE) A-B-C facility evaluation grading system re-quirements for Level 1 Inspection Reporting. The course concludes with both a written and practical exam.

Who Should AttendThis course is valuable to anyone involved in corrosion con-trol and integrity management of fixed offshore structures. The curriculum benefits varied levels of personnel, from those with management and planning responsibilities to the field inspec-tors conducting in-service inspections of the facility. The pro-gram is also valuable for offshore platform operations person-nel to better understand corrosion prevention systems utilized on offshore structures and their successful implementation.

PrerequisitesNo prior training is required.

Course Highlights (including but not limited to)• Corrosion and corrosion control• Protective coatings systems• Splash-zone systems• Cathodic protection systems• Regulatory issues• Corrosion prevention maintenance programs• Facility breakdown• Condition grading systems• Assessment standards• Safety• In-service evaluation equipment• Inspection planning• BOEMRE level 1 inspections (abc grading)• Data utilization and maintenance planning



Reference Material Included with Course Registration FeesStudents receive the following guide on-site:• Offshore Platform Photo Assessment Guide

4.0 CEUs

Corrosion in the Water and Wastewater Industry

To learn more about this course, please refer to page 36.

New ONLINe COurse


COATING INSPECTOR PROGRAM (CIP)The NACE Coating Inspector Program (CIP) has set a single, global standard for inspections in the protective coatings industry since 1983 and is the world’s most recognized and specified coating inspector certification program. Carrying the mo-mentum of over 20,000 certified inspectors representing 119 countries, CIP contin-ues to initiate today’s coatings professionals into the world of corrosion control by protective coatings, inspection of those coatings, and coatings project awareness, resulting in billions of dollars saved by reducing costly mistakes.

CIP CertificationOnce individuals successfully complete the corresponding course and exam, or pass the Peer Review, they are eligible for the related certifications, listed be-low. Each certification level allows them to perform different tasks in the field.

NACE Coating Inspector Level 1—CertifiedWith this level of certification, a person is qualified to undertake basic coat-ing inspection of structural steel using nondestructive techniques and instru-mentation under the supervision of a NACE Certified Coating Inspector-Level 3. The person certified at this level has basic knowledge of coating materials and techniques for surface preparation and application on steel substrates.

NACE Coating Inspector Level 2—CertifiedWith this level of certification, a person is qualified to perform advanced coating in-spections using both nondestructive and destructive techniques and instrumenta-tion. The person certified at this level has sufficient knowledge of specialized coat-ing materials and techniques for the surface preparation and application used on a wide variety of substrates. He/she also has ample knowledge in advanced report writing, condition surveys, failure analysis, and refurbishment.

NACE Certified Coating Inspector—Level 3With this level of certification, a person has demonstrated experience in practi-cal environments to a panel of peers when faced with coatings related sce-narios. This individual possesses the knowledge and can perform the tasks of individuals certified at Levels 1 and 2. Furthermore, this certification qualifies a person to supervise individuals who are NACE Coating Inspector Level 1-Certi-fied and NACE Coating Inspector Level 2-Certified.


COATING INSPECTOR PROGRAM

CIP Level 16-Day Classroom Course1st day: 10 a.m. to 7:30 p.m.2nd – 5th days: 8 a.m. to 7:30 p.m.6th day: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionCIP Level 1 offers over 60 hours of in-struction on the technical and practi-cal fundamentals of coating inspection work for structural steel projects. This course provides students with knowl-edge of coating materials and tech-niques for surface preparation and ap-plication that prepares the student to perform basic coating inspections using

non-destructive techniques and inspection instrumentation.

The course is presented in a format of classroom lecture, dis-cussion, group exercises and hands-on, practical labs that teach the student how to perform basic inspection tests. The course concludes with both written and practical exams, as well as an inspector log book evaluation.

Who Should AttendAlthough specifically designed for coating inspector trainees, this course benefits anyone interested in gaining a better un-derstanding of coatings application and inspection including project engineers, quality assurance managers, contractors, technical sales representatives, blasters, paint applicators, and maintenance personnel.

PrerequisitesThere are no prerequisites for this course.

Course Highlights (including but not limited to)• Coating types and curing mechanisms• Coating specifications including service environments and

coating life cycle• Surface preparation equipment, methods and standards for

abrasive blasting, solvent cleaning and power and manual tool cleaning

• Coating application by brush, roller, mitt, and conventional and airless spray

• Inspection procedures and the role of the inspector including safety, ethics, and conflict prevention and decision making

• Testing for environmental or ambient conditions and non-visible contaminants

• Non-destructive test instruments such as wet-film and dry-film thickness gauges and low and high voltage holiday detectors

• Surface profile measurement using replica tape and anvil micrometers, surface profile comparators, and digital surface profile gauges

• Quality control issues, recognizing design and fabrication

defects and coating failure modes• Material Safety Data Sheets (MSDS) and product technical

data sheets• Log book and report documentation

RecognitionUpon successful completion of CIP Level 1, a person will be recognized as NACE Coating Inspector Level 1—Certified.



Reference Material Included with Course Registration FeesStudents receive the CIP Level 1 Course Manual on CD prior to the start of course. A printed course manual is provided to students on-site.

5.6 CEUs

CIP Level 26-Day Classroom Course1st day: 10 a.m. to 7:30 p.m.2nd–5th days: 8 a.m. to 7:30 p.m.6th day: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionCIP Level 2 focuses on advanced in-spection techniques and specialized application methods for both steel and non-steel substrates, including concrete using both nondestruc-tive and destructive techniques. The course provides in-depth cover-age of surface preparation, coating types, inspection criteria, lab testing, and failure modes for various coat-ings, including specialized coatings and linings.

The course is presented in a format of classroom lecture, dis-cussion, group exercises and hands-on labs using destructive and nondestructive instruments and test methods. Students will also participate in case studies based on real-life situations and practices of a coatings inspector. The course concludes with both written and practical exams.

Who Should AttendAnyone interested in becoming NACE Coating Inspector Level 2-Certified or increasing his or her coating inspection knowl-edge should attend this course.







Continued on pg 8.


COATING INSPECTOR PROGRAM

CIP Level 2 (continued)

PrerequisitesSuccessful completion of CIP Level 1 classroom training or CIP Exam Course 1 with a current CIP Level 1 certification is re-quired to register for CIP Level 2.

Course Highlights (including but not limited to)• Advanced corrosion theory with an introduction to cathodic

protection when used with coatings• Environmental controls, equipment, and inspection concerns• Advanced environmental testing instrumentation including

digital electronic hygrometers, data loggers, and wind speed monitors

• Centrifugal blast cleaning and water jetting equipment standards, methods of use, and inspection concerns

• Advanced nondestructive test instruments including use and operating parameters for optical and digital microscopes, pH meters, and eddy-current dry film thickness and ultrasonic thickness gauges

• Destructive coating inspection equipment such as paint inspection gauges and adhesion and hardness testers

• Surface preparation, application and inspection of liquid-applied and thick barrier linings, powder, fireproof, anti-fouling, high-heat, concrete, pipeline, mainline, and field joint coatings

• Specialized application equipment including plural-component, electrostatic and centrifugal, and hot spray systems

• Concrete coating techniques, concerns, and test instruments used for inspection

• Specialized coating techniques and application of non-liquid coatings including powdered coatings, spray metallizing, hot-dip galvanizing, and automated coatings application

• Coating survey techniques and procedures and common coating failure modes

RecognitionUpon successful completion of CIP Level 2, a person will be recognized as NACE Coating Inspector Level 2—Certified.



Reference Material Included with Course Registration FeesStudents receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site.

5.6 CEUs

CIP Level 3 Peer Review2-Hour Oral Examination

DescriptionCIP Level 3 Peer Review is an intensive, detailed oral exami-nation that is given in front of a three-member review board and lasts approximately two hours. There is no correspond-ing coursework for CIP Level 3, only an oral assessment. Peer Review examinations are conducted by contemporaries of the coating inspection industry and are experts in their field of work.

Candidates must demonstrate that they can apply the practi-cal and theoretical knowledge of coatings they have learned throughout the CIP Level 1 and Level 2 courses and from experi-ences faced on the job in real-life situations. The exam ques-tions are selected from a random draw of topics ranging from (but not limited to) standards, procedures, ethics, coatings use, inspection instruments, and specific practical questions that require applicants to use their experience to solve the problem. The exam is graded on a pass/fail basis.

Who Should AttendAnyone interested in completing his or her CIP training to receive recognition as a NACE Certified Coating Inspector-Level 3. Students must have a current CIP Level 2 certification prior to enrollment.

PrerequisitesStudents who have successfully completed CIP Level 1 and CIP Level 2 and have two years of verifiable coatings-related work experience may register for the CIP Level 3 Peer Review. Work experience documentation forms must be submitted to NACE headquarters at least 60 days prior to the start date. These forms are located in the CIP Student Manuals or may be downloaded from the NACE Web site at www.nace.org. Submit your completed applications via fax to the number on the forms, +1 281-228-6344, or e-mail the signed forms to [email protected].

RecognitionUpon successful completion of CIP Level 3 Peer Review, a person is recognized as a NACE Certified Coating Inspector-Level 3.

FeesAdvanced RegistrationMember—$925 Nonmember—$1,105



CIP Exam Course 1 (with purchase of CIP DVD Set 1)

The CIP Exam Course 1 consists of both the CIP DVD Set 1 (pur-chased separately) and the 3-Day Classroom Course. Successful completion of both are required to achieve certification.

CIP DVD Set 1 (Sold separately)DescriptionCIP DVD Set 1 presents the technical content from the NACE CIP Level 1 classroom course in an easy-to-use, self-study format. The course material is presented in PDF format with embedded videos that correspond to the technical content of each chapter. Students can learn at their own pace while at home, in the office, or traveling.

Students are required to purchase AND complete the CIP DVD Set 1 before enrolling in the 3-Day Classroom Course.

System Requirements• Operating system: Windows XP/2000• Processor: Pentium 4, Speed: 200Mhz• Graphics: 65,000 colors at 800 by 600 resolution• DVD Drive• Sound Card: Windows Compatible• Adobe Acrobat Reader: Version 9.4 or higher

Fees CIP DVD Set 1Member—$410 Nonmember—$410

Reference Material Included with Course Registration FeesStudents receive the CIP Level 1 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students

3-Day Classroom Course1st – 2nd days: 8 a.m. to 7:30 p.m.3rd day: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThis option completes CIP Level 1 training contained in the CIP DVD Set 1 (prior purchase of DVD required). This three-day short course includes a practical lab at an offsite coatings facility, hands-on training necessary to perform coating inspection work, and team exercises. It concludes with both written and practical exams.

Who Should AttendCIP Exam Course 1 and the CIP DVD Set 1 is designed for coat-ing inspector trainees and those who work with protective coatings. Project engineers, quality assurance managers, con-tractors, painters, technical sales representatives, blasters, paint applicators, and maintenance personnel will benefit from the program.

PrerequisitesNo prior training is required; however, prior purchase of CIP DVD Set 1 is required to register for this course. In addition, NACE recommends that all five assessments contained in the DVD set be completed with a grade of 80% or higher before registering for this course.

Course Highlights See page 7 for details

Fees ClassroomAdvanced RegistrationMember—$1,405 Nonmember—$1,545


RecognitionUpon successful completion of CIP Exam Course 1, a person will be recognized as NACE Coating Inspector Level 1—Certified.

5.6 CEUs

CIP Exam Course 2 (with purchase of CIP DVD Set 2)

The CIP Exam Course 2 consists of both the CIP DVD Set 2 (pur-chased separately) and the 3-Day Classroom Course. Successful completion of both are required to achieve certification.

CIP DVD Set 2 (Sold separately)

DescriptionCIP Level 2 DVD contains the same technical content presented in the CIP Level 2 classroom course. The course material is pre-sented in PDF format with embedded videos that correspond to the technical content of each chapter. Students can learn at their own pace while at home, in the office, or traveling. Five, ten, fifteen, and twenty user license fees are also available.

Students are required to purchase AND complete the CIP DVD Set 2 before enrolling in the 3-Day Classroom Course.

System Requirements• Operating system: Windows XP/2000• Processor: Pentium 4, Speed: 200Mhz• Graphics: 65,000 colors at 800 by 600 resolution• DVD Drive• Sound Card: Windows Compatible• Adobe Acrobat Reader: Version 9.4 or higher

Continued on pg 10.

CIP EXAM COURSES

www.nace.org/education10

CIP EXAM COURSES

CIP Exam Course 2 (continued)

FeesCIP DVD Set 2Member—$410 Nonmember—$410

Reference Material Included with Course Registration FeesStudents receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site

3-Day Classroom Course1st–2nd days: 8 a.m. to 7:30 p.m.3rd day: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThis option completes the Level 2 training contained in the CIP DVD Set 2 (prior purchase of DVD required). This three-day short course includes hands-on training necessary to perform coating inspection work, team exercises, and concludes with both written and practical exams.

Who Should AttendCIP Exam Course 2 and the CIP DVD Set 2 is designed for coat-ing inspector trainees and those who work with protective coatings. Project engineers, quality assurance managers, con-tractors, painters, technical sales representatives, blasters, paint applicators, and maintenance personnel will benefit from the program.

PrerequisitesSuccessful completion of CIP Level 1 classroom training or CIP Exam Course 1 along with a current CIP Level 1 certification is re-quired to register for this course. Prior purchase of CIP DVD Set 2 is required to register for this course. All material contained in the DVD must be studied prior to course attendance.

Course Highlights See page 7 for details

FeesClassroomAdvanced RegistrationMember—$1,405 Nonmember—$1,545


RecognitionUpon successful completion of CIP Exam Course 2, a person will be recognized as NACE Coating Inspector Level 2—Certified.

5.6 CEUs

CIP Level 2, Maritime Emphasis6-Day Classroom Course1st day: 10 a.m. to 7:30 p.m. 2nd–5th days: 8 a.m. to 7:30 p.m.6th day: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionCIP Level 2, Maritime Emphasis highlights the skills and knowledge required to correctly perform a thor-ough coatings inspection aboard commercial ships in keeping with International Maritime Organization (IMO) and International Association of Classification Societies (IACS) rules. The course includes topics from CIP Level 2 and provides marine personnel with thorough knowledge of surface preparation and protective coatings for vessels, their application, and associated quality control.

The course is presented in a format of classroom lecture and dis-cussion. Students will also participate in hands-on practical labs to learn the different tools and techniques of the inspection equip-ment. Case studies will also be presented to address actual prob-lems in the marine coating industry. The course concludes with a written and practical exam at the end of the week.

Who Should Attend• Quality control and coating inspectors in the maritime industry• Coating applicators• Asset maintenance managers in shipyards• Ship classification society employees• Coating contractors• Ship owners• Flag administration surveyors

PrerequisitesSuccessful completion NACE CIP Level 1 course with current CIP Level 1 certification.

Course Highlights (including but not limited to)• Marine vessel types, major components, and classification

societies• Marine-specific corrosion factors affecting performance• Designing and fabricating for corrosion control in a marine

environment • Types of marine coatings and linings including liquid and

non-liquid, polymeric sheet materials, powder coatings, chemical-resistant brick and tile, and thick barrier and rubber linings

• Surface preparation and application of marine coatings• Marine coating defects, defect identification, and failure

modes • IACS, CSR, and IMO (PSPC) standards and regulations• Shipyard facilities and processes

CIP SPECIALTY COURSES





• Antifouling, pipeline and concrete coatings• Safety and environmental considerations, testing, and

controls in a marine environment• In-process and in-service inspections• Specifications, pre-job conference, and inspector

responsibilities• Quality control processes and instrumentation, both non-

destructive and destructive testing• Coatings maintenance, specialized tests and equipment, and

inspection criteria

RecognitionUpon successful completion of CIP Level 2, Maritime Emphasis, a person will be recognized as NACE Coating Inspector Level 2—Marine Certified.



Reference Material Included with Course Registration FeesStudents receive the CIP Level 2 Course Manual on CD prior to the start of the course. A printed course manual, Corrosion Prevention by Protective Coatings, and TPC-9 Users Guide to Hot Dip Galvanizing for Corrosion Protection in Atmospheric Service are provided to students on-site.

5.6 CEUs

Nuclear Power Plant Training for Coating Inspectors5-Day Classroom Course1st – 4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThis course is designed specifically to train CIP-certified coat-ing inspectors to conduct inspections in nuclear power plants (NPPs), as well as to familiarize non CIP-certified personnel with NPP coating requirements. The training focuses on the unique challenges presented by a nuclear facility’s restrictive and safety-critical environment, as well as the verbatim com-pliance demanded in NPPs. The course also delves deeply into government, industry, and plant-specific regulations, technical specifications, and procedures.

The course is presented in a format of classroom lecture and discussion but does not include inspection tools or equipment. The course concludes with a written examination.

Who Should Attend• NPP quality assurance managers• Qualified coating inspectors who want to perform

inspections in nuclear power plant facilities• Inspection firms—qualified inspectors and managers• Coating manufacturers sales and technical representatives• Coating inspection and evaluation personnel at architectural

engineering firms• Coating contractors• Coating evaluation personnel from the Nuclear Regulatory

Commission (U.S.)• Paint supervisors at nuclear power plants, who need to

understand what coating inspectors look for

PrerequisitesNo prior training is required, but CIP Level 1 certification is strongly recommended.

Course Highlights (including but not limited to)• NPP operations, work procedures, and industry terms• Industry organizations that regulate NPPs and the work

done in them• U.S. Code of Federal Regulations (CFR) 10 CFR 50 for Nuclear

Power Plants, and NRG Regulatory Guides• Industry and plant-specific ANSI and ASTM standards and

how they relate to coating inspections• The purpose, criteria, and types of qualified NPP coatings• Security and safety issues• Unique requirements of work in a nuclear power plant• Surface preparation and application specific to the various

service level areas in a nuclear facility• Requirements, methods, and means to conduct inspections

inside various areas of a NPP• Coating condition assessment for Coating Service Level I

(CSL I) areas

RecognitionUpon successful completion of the course, students will be recognized with a Nuclear Facilities Certification Supplement (NFCS) on their CIP cards. Students who are not CIP-certified coating inspectors will receive a Certificate of Completion.



Reference Material Included with Course Registration Fees• ASTM Standards• ASTM 2009 Annual Book of Standards, Vols. 06.01 and 06.02;

D 5144-08; C177-04; D 92-05a; E 1461-07; E 1530-06; E 337-02 (07); and E 94-09

• ANSI Standards N 101.2-1972; N 101.4-1972; N 5.12-1974; N 45.2.6-1978

3.6 CEUs



CIP One-Day Bridge CourseOne-Day Classroom Course8 a.m. to 5 p.m., unless otherwise noted

DescriptionThe CIP One-Day Bridge Course provides specialized training re-lated to coating inspection of bridges that meets the training re-quirements specified by the U.S. Department of Transportation. The course focuses on coating application of bridges and the role of the inspector in the quality control process, and guides the in-spector through a detailed project from start to finish. Students take a written examination at the conclusion of the course.

Who Should Attend• CIP participants seeking to expand their knowledge of

bridge coating application and inspection• Quality assurance and control inspectors and contractors• DOT bridge engineers• Asset maintenance managers• Coatings contractors• Inspection companies• Surface preparers• Applicators

PrerequisitesSuccessful completion of CIP Level 1 is required to register for this course along with current CIP Level 1 certification or higher.

Course Highlights (including but not limited to)• Bridge nomenclature, bridge member identification

numbering system, and industry specific terminology• Bridge types and components for steel, concrete, and wood

bridges including superstructure, substructure, decks, and bearings

• Overview of hazardous materials and waste containment, environmental protection and monitoring, and safety concerns

• Surface preparation including pre-inspection, fabrication defects, blast cleaning, waterjetting, atmospheric environmental exposure, chemical contamination of corroded steel, and inspection for nonvisible contaminants

• Coating materials for steel, concrete bridges, and wood bridges and ambient surface and materials condition requirements

• Sample specification encompassing construction methods for overcoating or removing coatings from a substrate, including surface pre-cleaning, preparation, and post-cleaning requirements for overcoating and full removal

RecognitionParticipants who successfully complete this course receive a bridge endorsement on their CIP cards.

FeesAdvanced RegistrationMember—$375 Nonmember—$510

Standard RegistrationMember—$455 Nonmember—$550

0.8 CEUs



G E N E R A L C O AT I N G SOf the technologies used to control corrosion, protective coatings is one of the most significant. They are used to provide protection for most materials and surface types in most environments. Approximately 90% of all expenditures as-sociated with corrosion control are related to protective coatings. A properly selected and applied coating system can increase the usable lifetime of a ma-terial while reducing replacement and maintenance costs.

NACE International provides the means of technical proficiency for the coatings industry through training courses specifically developed for coatings and linings application. Courses are tailored for individuals of all levels of experience—from the beginner to those looking to expand their roles into management or achieve NACE certification. The NACE PCS Training Program is one of the specialized train-ing programs geared towards individuals with various levels of coating experience, from applicators and contractors to engineers and project owners. The courses can be taken in succession; however individuals with more experience can choose which course(s) would benefit them most in their career.


Pipeline Coating Applicator Training5-Day Classroom Course1st - 5th days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThis five-day course will cover the proper coating applica-tion procedures including understanding specifications, surface preparation, application techniques, dealing with changing ambient conditions, quality control measures, etc. for the most common coating materials to which contractors and inspectors are exposed to on pipeline projects. Through the use of in-class presentations and videos, followed im-mediately by hands-on demonstrations in field conditions, students will learn, develop and practice the skills required to properly apply the specified field applied coatings under expected pipeline construction conditions.

Who Should AttendThis course is targeted to pipeline coating applicators but will also benefit pipeline inspectors, foremen and supervi-sors, engineers-in-charge, manufacturer reps, and even ex-perienced coatings personnel.

PrerequisitesThe following prerequisites are highly recommended, but not required:• High school diploma or GED• Ability to perform basic math calculations (simple algebra,

fractions, and conversions)• Ability to lift 40 pounds

Course Highlights (including but not limited to)• Introduction to pipelines—their component parts, pipeline

types, general pipeline construction methods• Pipeline corrosion and consequences of failure• Mainline (shop applied) coating types and applications• Field joint coating types and application• Pre-job requirements• Surface preparation• Preheating• Quality control• Field joint coating types• Application of cold applied tapes• Application of hot tapes• Application of petrolatum and wax brand tapes• Application of 2 and 3 layer sleeves• Application of liquid epoxy• Pre-insulated pipe coatings• Mainline coating repair, general

• Mainline coating repair, FBE specific• Environmental and professional considerations



Reference Material Included with Course Registration FeesStudents receive a printed course manual.

4.0 CEUs

GENERAL COATINGS

New COurse

Coatings in Conjunction with Cathodic ProtectionTo learn more about this course, please refer to page 26.

Coating Inspector Program (CIP)To learn about the courses available within the CIP program, please refer to pages 6-12.


GENERAL COATINGS

Shipboard Corrosion Assessment Training (S-CAT)5-Day Classroom Course1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThe Shipboard Corrosion Assessment Training course pro-vides a foundation of coatings, corrosion, and corrosion con-trol knowledge for assessing the condition of tanks and other military ship structures, while determining the required actions necessary to effectively maintain fully operational status. The course equips the naval assessor with practical guidelinesfor surveying and evaluating the condition of the protective coating system on specific areas of U.S. Navy vessels.

During the S-CAT course students will use the Shipboard Corro-sion Assessment Immersion Tool, the only virtual training environ-ment for corrosion in the marine industry. This training aid allows students to experience a direct simulation of events that occur on military and commercial ships every day. The desired end result is a consistent and orderly process of evaluation that has the confi-dence of everyone involved in the maintenance cycle.

Who Should Attend• Coating Inspectors• Shipyard Planners• Design Engineers• Type Commander Representatives• Port Engineers

PrerequisitesAttendees should possess a High School diploma (or GED) and have a minimum of three months experience in the evaluation of corrosion or coatings breakdown on marine vessels.

Course Highlights (including but not limited to)• Visual assessment exercises for all ship areas• Corrosion theory• Corrosion control methods• Cathodic protection overview• Protective coatings and linings overview• Corrosion resistant materials• Safety• Corrosion protection system evaluation• Evaluation tools and equipment including dry film thickness

measurement (DFT), tooke gauge and pit gauge• Grading system for U.S. Navy ships (CCIMS)• Marine coating failures• Total tank scoring• Adhesion testing



4.0 CEUs

PCS 1 Basic Principles3-Day Classroom Course1st – 3rd days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThis course introduces both the theo-retical and practical aspects of using coatings to control corrosion, as well as the economic benefits of managing them. This course defines and exam-ines common corrosion control coat-ings and addresses when, how, and where they should be used.

Who Should Attend• Planning, engineering and supervisory level personnel

responsible for industrial coatings and linings who are new to the field or position

• Specifiers, maintenance and project engineers in all industries• Marketing Representatives of coatings materials or equipment• Unit Managers involved in corrosion

Note: Those students who hold a NACE CIP Level-1 certification or similar certification from SSPC or Frosio should plan on treating this course as a complete review of previously covered material.

PrerequisitesNo prior training is required.

Course Highlights (including but not limited to)• Forms of corrosion, their mechanisms, and effects on safety,

costs, appearance and maintenance programs• Techniques of corrosion control and purposes of coatings and

linings• Types of coatings: how they are categorized, desirable

characteristics, and their components• Selecting coatings and coating systems (single and multiple)• Surface preparation safety, common techniques and equipment• Common application techniques and equipment used for a

variety of substrates• Standards used relating to surface preparations and application• Types of reports and developing a specification• Common coating defects and failures



Reference Material Included with Course Registration FeesCorrosion Prevention by Protective Coatings, 2nd Edition pro-vided to students on-site

2.4 CEUs





GENERAL COATINGS

PCS 2 Advanced3-Day Classroom Course1st – 3rd days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionPCS 2 Advanced provides advanced-level technology topics related to pro-tective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties, and any unique considerations for their sur-face preparation, application and in-spection. PCS 2 Advanced also delves deeply into testing coating properties

and performance, common coating defects, substrates, select-ing coating systems, the specification, and surveys and main-tenance planning.

Who Should AttendThis course is suitable for planning, engineering, supervisory level or technical personnel who work with protective coatings on a regular basis. The student should be able to learn basic chemistry concepts as they pertain to coatings and corrosion.

PrerequisitesNo prior training is required, but completion of PCS 1 Basic Principles is recommended.

Course Highlights (including but not limited to)• Uses of coatings and linings, best practices and external

factors that influence their use• Chemistry of liquid applied coatings and coating formation

chemistry• Difference between organic and inorganic coatings• Coating characteristics including the basic chemistry and

unique characteristics that affect surface preparation and application needs

• Common test and qualification methods for liquid-applied coatings

• Chemistry of non-liquid coatings• Unique application and quality control methods for

important non-liquid coatings• Testing coating properties and performance• Coating defects• Substrates (cast iron, steel, stainless steel, concrete and

cementitious surfaces, galvanized steel, aluminum), their unique surface preparation needs, and the standards that govern them

• Coating system types, system selection goals, objectives, performance requirements, design engineered properties and trade-offs

• Understanding coating specifications: —eliminating ambiguity —proper implementation

—identifying shortcomings —how departures from it can impact coating life• Understand industry standards and how to use properly in

specifications• Coating surveys and maintenance programs



Reference Material Included with Course Registration FeesThe Protective Coating User’s Handbook is provided to students on-site

2.4 CEUs

PCS 3 Management5-Day Classroom Course1st – 4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to 2 p.m., unless otherwise noted.

DescriptionPCS 3 Management will cover all aspects of managing struc-tures with protective coatings and linings. It will cover project design issues, specification development, project manage-ment, and maintenance planning.

Who Should AttendThe course is directed at students who have passed PCS 2–Advanced or who have equivalent experience. Students should have some basic understanding of finance.

PrerequisitesThis course is suitable for planning, engineering, or supervisory level personnel who have responsibility for industrial protective coatings and linings. The student should be able to learn man-agement concepts as they pertain to coatings and corrosion. Students should have a working knowledge of coatings before attempting this course. The course does not cover issues relat-ing to coatings chemistry and technology.

Course Highlights (including but not limited to)• Project management• The specification from a project manager’s point of view• Triangle of constraints• Work breakdown structure• Developing project costs and budget• Time and material estimation• Variation in costs and productivity factors• Schedule development





New ONLINe COurse

GENERAL COATINGS

• Critical path milestones• Earned value management• Risk mitigation• Contracting• Project control, execution, tracking and documentation• Developing coating maintenance programs (maintenance

concepts)• Condition forecast mathematics• Projecting outyear coating costs• Minimizing repair costs• Repair vs. replace decisions• Computerized coating program maintenance management• Coating life cycle cost analysis



3.6 CEUs

I.C.I. Online—Intro to Coating InspectionTo learn about the Introduction to Coating Inspection, please refer to page 37.


Cathodic Protection Training and CertificationThe NACE Cathodic Protection Training and Certification Program (CP) is a comprehensive program for professionals in any industry including pipelines and bridges, tanks and well casings, the maritime and offshore industries, coated steel and concrete, and water and wastewater systems. The program is designed to give students a path for continued career-long professional de-velopment.

The program is comprised of 7 courses that are designed to train a wide range of students depending on the individual’s experience level. Each CP course is an independent component of the program and has a different skill and educa-tion level for entry, taking into account the student’s work experience and math/science background.

The program includes four certification courses and moves from entry level (CP 1) to the most knowledgeable and experienced specialist level (CP 4). Once stu-dents successfully complete the corresponding exam they are eligible to apply for the related certification.

The CP program also offers specialized courses in CP Interference and Coat-ings in Conjunction with Cathodic Protection, both of which are essential fac-tors for the successful application and execution of cathodic protection. The CP 2 course is also offered as a specialty course specific to the maritime industry.

Whether you want to improve your career path through CP certification or en-hance your skills and knowledge related to on-the-job performance through CP training, NACE CP courses ensure the in-depth understanding of cathodic pro-tection that is critical to extending the operating life and integrity of your assets.


CATHODIC PROTECTION PROGRAM

CP 1—Cathodic Protection Tester6-Day Classroom Course 1st day 1 p.m. to 6:30 p.m.2nd to 5th days: 8 a.m. to 6:30 p.m. 6th day (exam day): 8 a.m. to 3 p.m., unless otherwise noted

Description The CP 1–Cathodic Protection Tester course is an intensive 6-day course presenting CP technology, which pre-pares students for the NACE Cathodic Protection Tester Certification exami-nation. This course provides theoreti-cal knowledge and practical funda-mentals for testing on both galvanic and impressed current CP systems.

Classroom instruction is comprised of lectures and hands-on training at an outdoor facility, using equipment and instruments for CP testing. The course concludes with an open book written exam and a closed book practical exam.

Who Should Attend This program benefits anyone responsible for supervising CP systems, measuring the effectiveness of CP systems, and/or recording this data, including CP field personnel and techni-cians. NACE CP 1—Cathodic Protection Tester Certification is awarded upon successful completion of course.

Prerequisites The following prerequisites are highly recommended, but not required: • High school diploma or GED • Six months of CP work experience • Ability to perform basic math calculations (simple algebra,

fractions, and conversions)

What You Need to Know to Succeed in This Course Students with little CP experience may be successful in this course if they can grasp scientific concepts, can perform math calculations, and possess an understanding of electrical mea-surements. Ideally, students should have six months of solid work experience in handling CP instruments under the super-vision of an experienced CP Tester or Technician.

If you are not sure if you possess the basic knowledge to pass CP 1, you may walk through the short primer on Ohm’s Law and basic math assessment online. • Ohm’s Law (www.nace.org)• Math Assessment (www.nace.org)

Course Highlights (including but not limited to) • Basic electricity• Basic chemistry and corrosion fundamentals• CP fundamentals• Field measurements• Stray current identification• Installing CP components• Monitoring CP systems• Recordkeeping• Safety specific to CP• Troubleshooting

Skill Assessment Upon successful completion of the examination, a Certified NACE Cathodic Protection Tester will possess (but will not be limited to) the following skills and knowledge factors:• Understand the basics of electricity, electrical laws,

electrochemistry, corrosion, and CP theory• An understanding of polarity related to current flow and

metal corrosion activity• Conduct tests to identify shorts and continuity tests in CP

systems• Use test instruments to perform a variety of field tests

such as structure-to-soil potentials, voltage and current measurements, soil resistivity, pipe/cable locating, and rectifier readings

• Understand CP components including impressed current systems, galvanic anodes and test stations

• Read shunts and understand their use in rectifiers, bonds, and anodes

• Perform periodic surveys to confirm the effectiveness of a CP system

• Gain knowledge of reference cells, their maintenance, use, and precautions

• Learn basic location mapping, report preparation, and recordkeeping

• Review safety issues specific to CP• Understanding of code requirements related to CP



Reference Materials Included with Course Registration Fees Students receive the CP 1–Cathodic Protection Tester Course Manual on CD prior to the start of the course. A printed course manual, as well as Peabody’s Control of Pipeline Corrosion, is provided to students on-site.

5.0 CEUs





CP 2—Cathodic Protection Technician6-Day Classroom Course 1st day: 1 p.m. to 6:30 p.m.2nd to 5th days: 8 a.m. to 6:30 p.m. 6th day (exam day): 8 a.m. to 3 p.m., unless otherwise noted

Description The CP 2–Cathodic Protection Technician course is an intensive 6-day course pre-senting CP technology, which prepares students for the NACE Cathodic Protec-tion Technician Certification examination. Course topics include intermediate-level discussions of corrosion theory and CP concepts, types of CP systems, AC and

DC stray current interference, and advanced field measurement techniques. This course provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the effectiveness of both galvanic and impressed current CP sys-tems and to gather design data. Classroom instruction is comprised of lectures and hands-on training at an outdoor facility, using equip-ment and instruments for CP testing. The course concludes with an open book written exam and a closed book practical exam.

Who Should Attend This course is designed for individuals with a working knowledge of CP or possess extensive years of CP field experience with a technical background. Students should complete a preliminary ap-plication for certification at least 60 days in advance so that pre-requisites can be verified. Knowledge of the following subjects are necessary for understanding the material in this course: in-depth high school chemistry and mathematics courses (algebra, balanc-ing equations, conversions of units, logarithms, and graphs); the NACE Basic Corrosion course, CP 1-Cathodic Protection Tester course, or equivalent; and comprehensive knowledge of electro-chemistry, electricity, electrical laws, series and parallel circuits, meter operation, and CP fundamentals.

Prerequisites Students must choose one of the options below and meet all of the prerequisites before registering for the CP 2—Cathodic Protection Technician course.

OPTION 1• 1 year CP work experiencePLUS• 4-year Physical Science or Engineering degreeSTROnGLy RECOmmEnDED• CP Tester Certification or equivalent training

OPTION 2• 2 years CP work experiencePLUS

• 2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training

STROnGLy RECOmmEnDED• CP Tester Certification or equivalent training

OPTION 3• 3 years CP work experiencePLUS• High school diploma or GED including algebra and

logarithms trainingSTROnGLy RECOmmEnDED• CP Tester Certification or equivalent training

Course Highlights (including but not limited to) • Corrosion theory• CP fundamentals• Field measurements and instrumentation• DC power sources • Safety specific to CP• CP recordkeeping

Skill Assessment Upon successful completion of the examination and certifica-tion application approval, a Certified NACE Cathodic Protection Technician will possess (but will not be limited to) the following skills and knowledge factors:• Perform advanced field tests (including current requirement

test, shorted casing test, IR drop test, soil resistivity, and interference tests) and evaluate the results

• Perform tests to verify the presence of stray current interference and recommend method(s) to mitigate the interference

• Understand AC voltage and its mitigation• Maintenance of documentation and records, including data

plotting and analysis• Conduct and understand the importance of periodic surveys,

including IR-Free readings, polarization decay tests, and current measurements

• Test and troubleshoot rectifier component parts• Understand corrosion coupon test stations• Understand code requirements related to CP



Reference Materials Included with Course Registration Fees Students receive the CP 2–Cathodic Protection Technician course manual on CD prior to the start of the course. A printed course man-ual, as well as Cathodic Protection Survey Procedures by W. Brian Holtsbaum, are provided to students on-site.

5.0 CEUs







CP 3—Cathodic Protection Technologist6-Day Classroom Course1st day: 10 a.m. to 6:30 p.m.2nd to 5th days: 8 a.m. to 6:30 p.m.6th day (exam day): 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThe CP 3–Cathodic Protection Technolo-gist course is an intensive 6-day course presenting CP technology, which pre-pares students for the NACE Cathodic Protection Technologist Certification examination. The course concludes with an open book written exam and a closed book practical exam.

Who Should AttendThis course is designed for individuals with extensive CP field experience and a strong technical background in cathodic pro-tection. Students should complete a preliminary application for certification at least 60 days in advance so prerequisites can be verified.

PrerequisitesStudents must choose one of the options below and meet all of the prerequisites before registering for the CP 3 – Cathodic Protection Technologist course. A strong algebra background, with thorough understanding of units conversions and scientific notation, is re-quired as a minimum mathematics prerequisite. A basic under-standing of trigonometry and geometry is also recommended.

OPTION 1• 3 years CP work experience with progressively increasing

technical responsibilities

PLUS

• 4-year Physical Science or Engineering degree

STROnGLy RECOmmEnDED• CP Technician Certification or equivalent training



PLUS

• 2-year post high school training from an approved math or science technical/trade school including algebra and logarithms training




PLUS

• High school diploma or GED including algebra and logarithms training


Course Highlights (including but not limited to) • CP theory• CP criteria• CP interference• Detecting stray current, AC interference, and telluric current

interference• CP design fundamentals• Design calculations (circuit resistances, system capacity

and life, number of anodes, driving voltage)• Evaluation of system performance• Troubleshooting cathodic protection systems

Skill AssessmentUpon successful completion of the examination and certifica-tion application approval, a Certified NACE Cathodic Protection Technologist will possess (but will not be limited to) the follow-ing skills and knowledge factors: • Understand activation, concentration, and resistance

polarization, and the mathematical expressions of these concepts

• Understand the factors that affect polarization (area, temperature, relative movement, ion concentration, oxygen concentration)

• Understand the NACE criteria for CP, be able to apply the criteria, and make adjustments as necessary to CP systems in compliance with the criteria defined by the company where the technologist is employed

• Understand the concept of current distribution and be able to determine ideal current distribution for a CP system taking into account the factors affecting current distribution (anode-to-cathode separation distance, electrolyte and structure resistivity variation, current attenuation)

• Perform advanced cathodic protection testing using correct measurement techniques to monitor CP system performance, and accurately interpret the data collected to ensure optimum CP system performance. Based on data collected, determine if correction/modifications to system components are necessary

• Identify errors in data collection/CP measurements including contact resistance errors, voltage drop errors, and reference electrode errors

• Conduct and document interference tests to determine if interference exists and identify the source of the interference

• Upon determination of interference, identify and implement a method of control that will mitigate the effects of the stray current




Continued on pg 22.


CP 3—Cathodic Protection Technologist (continued)

• Design and install simplistic forms of galvanic and impressed current cathodic protection facilities, and perform the necessary mathematical calculations



Reference Materials Included with Course Registration Fees Students receive the CP 3–Cathodic Protection Technologist course manual on CD prior to the start of the course. A printed course manual is provided to students on-site.

5.4 CEUs

CP 4—Cathodic Protection Specialist6-Day Classroom Course 1st day: 1 p.m. to 7:30 p.m.2nd–5th days: 8 a.m. to 7:30 p.m. 6th day (exam day): 8 a.m. to 5 p.m., unless otherwise noted

Description The CP 4–Cathodic Protection Special-ist course is an intensive 6-day class fo-cusing on the principles and procedures for CP design on a variety of structures for both galvanic and impressed current systems. The course discusses theo-retical design concepts, considerations that influence the design (environment, structure type/materials of construction,

coatings), design factors, and calculations (including attenuation). Classroom instruction is comprised of lecture, in-class discussion, and practice with design calculations on various structures (i.e., pipelines, tanks and well casings, offshore applications, and steel reinforcing in concrete structures).

The course concludes with a written and a problem solving exami-nation. The examination is open book and students are welcome to bring any printed reference material they would like to the ex-amination.

Who Should Attend This course is designed for those individuals having experience in the design, installation, and maintenance of CP systems. Prior

to taking the NACE training course or the exam, students must have completed college or university-level courses in algebra, geometry, and trigonometry, and must have significant amounts of practical and field experience in CP design.

IMPORTANT NOTE: The CP Specialist certification is a chal-lenging exam. A direct progression from Cathodic Protection Technologist (CP 3) to Cathodic Protection Specialist (CP 4) does not exist. Participating only in the CP 4–Cathodic Protec-tion Specialist course does not ensure success on the Cathod-ic Protection Specialist examination. Substantial experience involving all aspects of cathodic protection, including design and formal education in math/science/engineering, is critical to students’ success in the course and examination. Atten-dance at the Cathodic Protection Technologist and CP Interfer-ence courses are highly recommended before taking the CP 4–Cathodic Protection Specialist course or exam-only option.

Prerequisites Students must choose one of the paths below and meet all of the prerequisites before registering for the CP 4—Cathodic Protec-tion Specialist course. A strong background in advanced algebra, trigonometry, and geometry is recommended as a minimum math-ematics prerequisite.

OPTION 1• 4 years CP work experience in responsible charge PLUS One of the following:• A Bachelor’s degree in Engineering or Physical Science and

an advanced degree that required a qualification exam• P.E., P.Eng, or equivalent• EIT registration or equivalentPLUS• CP Technologist Certification or equivalent training

OPTION 2• 6 years CP work experience, including 4 years in

responsible chargePLUS• 4-year Physical Science or Engineering degreePLUS• CP Technologist Certification or equivalent training

OPTION 3• 12 years CP work experience, including 4 years in

responsible chargePLUS• 2 years post-high school training in math or science from

an approved technical/trade school including algebra, trigonometry, and logarithms training

PLUS• CP Technologist Certification or equivalent training

Course Highlights (including but not limited to) • Concept of CP





www.nace.org/education 23


• Factors influencing CP design• CP systems• Design factors and calculations• Design examples for the following structures/environments:

—transmission and other pipelines, tanks, and well casings —marine and offshore applications —water tanks, surface condensers, and thickeners —steel reinforcing in concrete structures

Skill Assessment Upon successful completion of the examination and certifica-tion application approval, a Certified NACE Cathodic Protection Specialist will possess (but will not be limited to) the following skills and knowledge factors:• Design complete CP systems in a variety of industry

applications including water tanks, aboveground and underground storage tanks, and pipelines

• Demonstrate knowledge of rectifier and ground bed installation, along with source code calculations and protective coatings

• Perform corrosion analysis on the job site• Manage and direct field tests• Apply new technologies to existing CP programs• Provide formal training to understudies on basic and

advanced CP concepts• Understand and comply with codes, regulations, reporting

procedures, and standard practices



Reference Materials Included with Course Registration Fees Students receive the CP 4–Cathodic Protection Specialist Course manual on CD prior to the start of the course. A printed course manual and Handbook of Cathodic Corrosion Protec-tion: Theory and Practice of Electrochemical Protection Pro-cesses are provided to students on site.

5.6 CEUs

CP Exam-Only Options

CP 1—Cathodic Protection Tester Exam-Only4.5-Hour Examination

Description Students seeking CP Tester certification and do not take the CP 1-Cathodic Protection Tester course may earn certification through an Exam-Only option. This option consists of a 2.5-hour written examination and a 2-hour hands-on, practical examina-tion, which are the same exams offered in the CP 1 course. Ex-am-Only candidates receive a CP 1–Cathodic Protection Tester Course Manual by mail after registering for the exam. Examina-tions are offered on the last day of the regularly scheduled CP 1–Cathodic Protection Tester course offerings.

Prerequisites The following prerequisites are highly recommended, but not required: • High school diploma or GED • Six months of CP work experience • Ability to perform basic math calculations (simple algebra,

fractions, and conversions)

Exam Only Option Candidates may sit for the CP Tester examination without tak-ing the class. The written exam is open book so that candidates can bring their own printed references; however, the practical exam is closed book. Exam-Only candidates may only attend the course on the day of the exam. Contact NACE FirstService for more information by phone: +1 281-228-6223, or e-mail: [email protected]. Registration fees for exam only candidates are nonrefundable.

Fees Member—$690 Nonmember—$850

CP 2—Cathodic Protection Technician Exam-Only4.5-Hour Examination

Description Candidates meeting the prerequisites for CP 2 may sit for the Cathodic Protection Technician Certification exam without tak-ing the CP 2–Cathodic Protection Technician course. The Ex-am-Only option consists of the same 2.5-hour written exam and 2-hour practical exam offered in the CP 2–Cathodic Protection Technician Course. Exam-Only candidates receive a CP 2–Ca-thodic Protection Technician course manual by mail after regis-tering for the exam. Examinations are offered on the last day of the regularly scheduled CP 2 course offerings. Candidates may only attend the course on the day of the exam.

CP EXAM-ONLY COURSES


CP 2—Cathodic Protection Technician Exam-Only (continued)

Prerequisites All prerequisites must be met in order to register for the Exam-Only option. Candidates have three paths from which to choose. If choosing to take the Exam-Only option for certification, please note that candidates must also have training equivalent to the in-formation presented in the CP 2–Cathodic Protection Technician course. An approved application is required before certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: [email protected] to receive an application.

Exam-Only Option Qualified candidates may sit for the Cathodic Protection Tech-nician Certification exam without taking the class. The written exam is open book so that candidates can bring their own print-ed references; however, the practical exam is closed book. Due to the difficulty level of the Exam-Only Option, NACE highly rec-ommends that individuals have prior CP training equivalent to the CP 2–Cathodic Protection Technician course in addition to the prerequisites listed for CP 2. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: [email protected]. Registration fees for Exam-Only candidates are nonrefundable.


CP 3–Cathodic Protection Technologist Exam-Only7.5-Hour Examination

DescriptionCandidates meeting the prerequisites for CP 3 may sit for the Ca-thodic Protection Technologist Certification exam without taking the CP 3–Cathodic Protection Technologist course. The Exam-Only option consists of the same 5-hour written exam and 2.5-hour problem solving exam offered in the CP 3–Cathodic Protection Technologist Course. Exam-Only candidates receive a copy of the CP 3–Cathodic Protection Technologist course manual by mail af-ter registering for the exam. Examinations are offered on the last day of the regularly scheduled CP 3 course offerings. Candidates may only attend the course on the day of the exam.

PrerequisitesThe same work experience requirements and prerequisites that apply to the CP 3–Cathodic Protection Technologist Course apply to the Exam-Only option. Candidates have three prerequi-site paths from which to choose. If choosing to take the Exam-Only option for certification, please note that candidates must also have CP training equivalent to the training presented in the CP 3 course. An approved application is also required before

this certification is issued. Applications are available online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: [email protected] to receive an application.

Exam-Only OptionQualified candidates may sit for the Cathodic Protection Technolo-gist Certification exam without taking the class. The written exam is open book so that candidates can bring their own printed refer-ences; however, the problem solving exam is closed book. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: [email protected] to receive an application.


CP 4—Cathodic Protection Specialist Exam-Only7.5-Hour Examination

Description Candidates meeting the prerequisites for CP 4 may sit for the Cathodic Protection Specialist exam without taking the CP 4-Cathodic Protection Specialist course. The Exam-Only option consists of the same 5-hour written and 2.5-hour problem solv-ing exams offered in the CP 4 course. Exam-Only candidates re-ceive a copy of the CP 4–Cathodic Protection Specialist Course manual by mail after registering for the exam. Examinations are offered the last day of the regularly scheduled CP 4-Cathodic Protection Specialist course offerings. Candidates may only at-tend the course on the day of the exam.

Prerequisites The same work experience requirements and prerequisites that apply to the CP 4–Cathodic Protection Specialist Course apply to the Exam-Only option. Candidates have three prereq-uisite paths from which to choose. An approved application is required before certification is issued. Applications are avail-able online at www.nace.org, or contact NACE FirstService by phone: + 1 281-228-6223, or e-mail: [email protected] to receive an application.

Exam-Only Option Qualified candidates may sit for the Cathodic Protection Special-ist Certification exam without taking the CP 4 course. The written exam is open book so that candidates can bring their own printed references. For more information, contact NACE FirstService by phone: +1 281-228-6223, or e-mail: [email protected]. Regis-tration fees for exam only candidates are nonrefundable.


CP EXAM-ONLY COURSES


CATHODIC PROTECTION SPECIALTY COURSES

CP Specialty Courses

CP 2—Cathodic Protection Technician—Maritime6-Day Classroom Course 1st day: 1 p.m. to 6:30 p.m.2nd–5th days: 8 a.m. to 6:30 p.m. 6th day: 8 a.m. to 3 p.m., unless otherwise noted

Description Developed for NAVSEA (part of the U.S. Navy), this intensive six-day course presents CP technology to prepare students for the NACE Cathodic Protection Technician —Maritime Certification examination. The course represents a parallel path to certification with specific discussion pertaining to shipboard cathodic protec-tion. It also provides both theoretical knowledge and practical techniques for testing and evaluating data to determine the ef-fectiveness of both galvanic and impressed current CP systems. Course topics include intermediate level discussions of corrosion theory and CP concepts including those specific to ships, types of CP systems, AC and DC stray current interference, and advanced field measurement techniques specific to ships.

Who Should Attend This course is designed for individuals who work in the maritime industry, have a working knowledge of shipboard cathodic protec-tion, or have extensive years of CP field experience with a technical background. Students must complete a preliminary application for certification at least 60 days in advance so that education and pre-requisites can be verified. Knowledge of the following subjects are necessary for understanding the material in this course: in-depth high school chemistry and mathematics courses (algebra, balanc-ing equations, conversions of units, logarithms, and graphs); the NACE Basic Corrosion course, CP 1—Cathodic Protection Tester or equivalent; and comprehensive knowledge of electrochemistry, electricity, electrical laws and series and parallel circuits, meter operation, and CP fundamentals.

Prerequisites For each path, all prerequisites must be met in order to register for the CP2—Cathodic Protection Technician–Maritime course.

OPTION 1• 1 year CP work experiencePLUS• 4-year Physical Science or Engineering degreeSTROnGLy RECOmmEnDED• CP Tester Certification or equivalent training

OPTION 2• 2 years CP work experiencePLUS• 2-year post high school training from an approved math

or science technical/trade school including algebra and logarithms training

STROnGLy RECOmmEnDED• CP Tester Certification or equivalent training

OPTION 3• 3 years CP work experiencePLUS• High school diploma or GED including algebra and

logarithms trainingSTROnGLy RECOmmEnDED• CP Tester Certification or equivalent training

Course Highlights (including but not limited to) • Corrosion Theory• CP Fundamentals• CP Systems• Corrosion Resistant Materials Used in Marine Vessels• DC Power Sources for CP and Shipboard CP• Safety Specific to CP• Field Measurements Specific to Marine Vessels• Stray Current and CP Interference• Monitoring CP Systems• Troubleshooting

Skill Assessment To receive the Cathodic Protection Technician— Maritime certifi-cation, a student must pass an open book, written exam, a closed book, practical exam, and submit a certification application upon successful completion of the examination. A Certified NACE CP Technician— Maritime will possess the following skills and knowl-edge factors: • Perform advanced field tests and evaluate the results • Perform tests to verify the presence of stray current

interference and recommend method(s) to mitigate the interference

• Maintenance of documentation and records, including data plotting and analysis

• Conduct and understand the importance of periodic surveys, including IR Free readings, polarization decay tests, and current measurements

• Test and troubleshoot rectifier component parts • Understand corrosion coupon test stations • Understand code requirements related to CP • Understand AC voltage and its mitigation



Reference Materials Included with Course Registration Fees Students receive the CP 2–Cathodic Protection Technician-Maritime Course Manual on CD prior to the start of course. A printed course manual and Cathodic Protection Survey Proce-dures by W. Brian Holtsbaum are provided to students on-site.

5.0 CEUs


Coatings in Conjunction with Cathodic Protection6-Day Classroom Course 1st day: 1 p.m. to 5:30 p.m.2nd–5th days: 8 a.m. to 5:00 p.m. 6th day: 8 a.m. to noon., unless otherwise noted

DescriptionThe Coatings in Conjunction with Ca-thodic Protection (CCCP) course focus-es on the control of metallic corrosion by protective coatings and cathodic protection, with coatings as the pri-mary method of control supplemented by cathodic protection. A clear under-

standing of the synergistic relationship as well as the principles of the two technologies when used together is crucial to un-derstanding the risks involved when either component fails to perform as engineered.

The course will cover the selection, specification, application, testing and inspection of coatings when used with CP. CCCP provides students with the skills and knowledge to implement and monitor a corrosion control program that utilizes both methods. The course concludes with a written exam at the end of the week.

Who should attend?CCCP is designed for personnel who design, test, inspect, apply and monitor various structures that are both coated and cath-odically protected. Those responsible for making risk manage-ment and integrity decisions (managers and engineers) as well as field personnel and technicians will also benefit from the material in this course.

Course Highlights (including but not limited to)• Basic corrosion theory and CP fundamentals• Types of structures protected by coatings and CP• Synergistic relationship of coatings used in conjunction with

CP• Advantages and disadvantages of coating types used with CP• Selection criteria, application, inspection and testing of

various coatings • Failure modes of the various coatings in relationship to CP • Disbonded coatings as related to external corrosion and

stress corrosion cracking• Defining CP shielding and non-shielding coatings• Proper examination and evaluation of in-service coatings

used with CP


• Coating performance testing• Discussions of various CP survey techniques (CIS, DCVG,

ACVG, current requirements, etc.)• Evaluation of external corrosion



Reference Materials Included with Course Registration Fees Students receive the Coatings in Conjunction with Cathodic Protection Course Manual on CD prior to the start of course. A printed course manual and Corrosion Prevention by Protec-tive Coatings, Second Edition by C.G. Munger, revised by L.D. Vincent are provided to students on-site.

4.8 CEUs

CP Interference6-Day Classroom Course 1st day: 1 p.m. to 6:30 p.m. 2nd–5th days: 8 a.m. to 6:30 p.m. 6th day: 8 a.m. to 3 p.m., unless otherwise noted

Description The Cathodic Protection Interference course focuses on AC, DC, and telluric interference. The course provides in-depth coverage of both theoretical concepts and practical applica-tions of identifying interference and interference mitigation techniques. Students will learn to identify the causes and ef-fects of interference, conduct tests to determine if an interfer-ence condition exists, and perform calculations required to predict AC interference.

Classroom instruction is comprised of lecture and discussion, in-class experiments, case studies, and group exercises. The course concludes with a written exam.

Who Should Attend This course is designed for individuals with extensive CP field experience, a strong background in mathematics, and a strong technical background in cathodic protection.

Prerequisites • CP 3—Cathodic Protection Technologist certification

recommended • Minimum of 3 years CP work experience

Parallel Path to Certification for• Senior Corrosion




• Thorough understanding of: —Units conversions —Scientific notation —Advanced algebra —DC circuitsPrevious exposure to: —Basic AC circuits —Complex numbers (i.e., imaginary numbers) —Interference testing

Course Highlights (including but not limited to) • Effects of stray current, AC voltage, and telluric currents on

metallic structures• Detecting stray current, AC interference, and telluric current• Deleterious effects of AC and DC interference• Mitigation and monitoring of AC and DC interference• Predicting AC interference

Fees Advanced Registration Member—$1,380 Nonmember—$1,560


Reference Materials Included with Course Registration Fees Students receive the CP Interference course manual on CD prior to the start of the course. A printed course manual is pro-vided to students on-site.

5.0 CEUs

The NACE On-Site Course Training Program offers you the opportunity to have your employees trained and NACE certified at your own facility while saving money on travel expenses. On-Site Courses also give you flexibility to choose the training that best fits the needs of your company with convenient scheduling options.

Benefits of an On-Site Course:• No Travel Costs—The average cost, including travel, food and housing, to send an employee to another

city for training is over $1400 and that doesn’t include the actual cost of the training. With NACE On-Site courses, we will send the instructor and course materials to you.

• Reduced Course Prices—On-Site courses fees are reduced from the list price of a standard public course. Also, the more students you have the less expensive it is per student.

• Choose your own date, location and course—Schedule a course when it is most convenient for your company. Courses can be scheduled with a minimum of 30 days notice and can be held at your facility.

• On-Site Training Requirements~~ A classroom large enough to accommodate seating and tables for students and instructors, audio and visualequipment, and instrumentation/equipment. Certain courses may require an additional room for examinations on the last day of class.

~~ Able to provide the required work stations, materials, tools and equipment for the Lab Day which provides important hands-on experience for our students.

~~ A minimum of 12 students is required for On-Site Training in the U.S., 15 for International.

To learn more about the On-Site training requirements or to schedule a course at your facility contact: Nalleli Cly, Training Logistics Coordinator, at +1 281-228-6412 or [email protected].


Why send your employees to another city for training when NACE can send the training to you!

NACE On-SiteTraining & Certification


Pipeline Industry ProgramsAs our pipeline infrastructure continues to age, it demands constant monitoring and maintenance. Add to that the changing regulatory requirements, it is now more important than ever that operators are aware of how corrosion and other defects can impact the integrity of the pipeline. Significant cost savings can be realized by implementing available corrosion prevention and mitigation technologies as a component of an existing integ-rity management plan. The NACE Internal Corrosion and Cathodic Protection Programs offer the pipeline industry the technical knowledge and skills to en-sure safe operation of our pipelines without failures that may jeopardize public safety, result in product loss, or cause property and environmental damage. In addition to those programs, NACE will launch three new courses this Fall as part of its Pipeline Corrosion Integrity Management Program (PCIM). Pipeline Corrosion Assessment Field Techniques (P–CAFT), Direct Assessment, and In-Line Inspection will join the existing PCIM Management course to complete the program. These courses may be taken as stand-alone training for continued professional development or as part of the path toward the Pipeline Corrosion Integrity Management certification. The PCIM program offers two certification tracks. The PCIM Technician certifi-cation focuses on remediation technology and field techniques for carrying out integrity assessments. The PCIM Technologist certification will focus on the implementation and management of an integrity program for a pipeline system.

Pipeline Coating Applicator TrainingTo learn about the Pipeline Coating Applicator Training course, please refer to page 14.

Cathodic Protection (CP) ProgramTo learn about the courses within the Cathodic Protection (CP) Program, please refer to pages 18-27.

NACE Operator Qualification Program (OQ)To learn about the modules within the NACE OQ Program, please refer to page 36.


INTERNAL CORROSION PROGRAM

Internal Corrosion for Pipelines—Basic5-Day Classroom Course1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThis course was designed to provide students with the fundamentals of implementing, monitoring, and main-taining an internal corrosion control program as part of an overall Pipeline Integrity Management program. It is an introductory level course focusing

on internal corrosion of liquid and natural gas pipelines used for transmissions, storage, and gathering systems. Classroom instruction consists of lecture, group exercises, cases studies and hands-on field testing using different instruments and tech-niques utilized to identify and monitor internal corrosion. The course concludes with both a written and practical examina-tion.

Who Should AttendThis course is geared toward individuals at the technologist level who have some background in corrosion and are familiar with pipeline operations.

Prerequisites• High School Diploma• 4 years internal corrosion work• It is also recommended that students have successfully

completed the NACE Basic Corrosion Course (see page 3) and high school chemistry.

Course Highlights (including but not limited to) • Corrosion theory, types, and factors that influence corrosion• Monitoring methods including analysis of gas, liquid, and

sludge/solid samples, examination of exposed surfaces, corrosion coupons, and electronic probes

• Mitigation methods such as chemical treatment by biocides and corrosion inhibitors, drips, line-sweeping and pigs

• Integrity assessment methods including direct assessment, in-line inspection and hydrostatic testing



Reference Material Included with Course Registration FeesStudents receive the Internal Corrosion for Pipelines course manual on CD prior to the start of the course. A printed course manual and the Field Guide for Investigating Internal Corrosion of Pipelines are provided to students on-site.

4.0 CEUs

Internal Corrosion for Pipelines—Advanced5-Day Classroom Course1st – 4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThe Internal Corrosion for Pipelines - Advanced course focuses on the monitoring techniques and mitigation strategies required to assess internal corrosion and develop and manage internal corrosion control programs. Data interpretation, analysis and inte-gration, as well as criteria for determin-ing corrective action for high-level internal corrosion problems within a pipeline system, will be covered in detail. Classroom instruction consists of lecture, group exercises, and case stud-ies. The course concludes with a written exam at the end of the week.

Who Should AttendIndividuals responsible for implementation, maintenance, engi-neering, and/or management of internal corrosion control pro-gram for pipeline system.

PrerequisitesTo attend this course, students should meet the requirements on one of the following paths:

Path 1 • Hold current NACE Internal Corrosion Technologist

Certification

Path 2• 8 years internal corrosion work experience in a pipeline

environment

Path 3• 4 years internal corrosion work experience in a pipeline

environment plus a Bachelor’s degree in one of the following:

—Chemistry, Microbiology, Biology, Chemical Engineering, Metallurgical Engineering

Parallel Path to Certification for• Internal Corrosion


Parallel Path to Certification for• Senior Internal

Corrosion Technologist

See page 42 for details.


INTERNAL CORROSION PROGRAM

Course Highlights (including but not limited to) • Threat evaluation of a pipeline system using a set of

criteria which includes any past failures, inspections and assessments, monitoring results, the presence of water and its composition, if microorganisms or solids are present, flow conditions, operating temperature and pressure, and system design

• Monitoring techniques such as corrosion coupons, linear polarization and electrical resistance probes, electrical field mapping, ultrasonic testing, hydrogen and microbiological monitoring

• Inspection methods including visual, magnetic flux leakage, manual, automated and guided wave ultrasonic testing, eddy current and radiographic testing to detect and evaluate damaged areas

• Selecting a representative location for inspection and the criteria for choosing the appropriate inspection method and determining if mitigation is required

• Mitigation methods including maintenance pigging, physical design changes and operational modifications

• Minimizing internal corrosion during the design stage through materials selection, modification of environment, system configuration, operating parameters

• Optimizing an internal corrosion program through risk management, economic evaluations and defined procedures for monitoring and maintenance operations, data management and integration and management of change



Reference Material Included with Course Registration FeesStudents receive the IC Advanced course manual on CD prior to the start of the course. A printed course manual, as well as nACE Corrosion Engineer’s Reference Book, Third Edition is provided to students on-site.

3.6 CEUs

Internal Corrosion Exam—OnlyInternal Corrosion for Pipelines–Basic (Exam-Only Option)The Internal Corrosion for Pipelines—Basic (Exam-Only Option) consists of a 2-hour written and a 2-hour practical examination. Students seeking certification for Internal Corrosion Technolo-gist and who are not enrolled in the Internal Corrosion for Pipe-lines—Basic course will take the same written and practical examinations offered in the classroom course.

FeesMember—$690 Nonmember—$850

Internal Corrosion for Pipelines—Advanced (Exam-Only Option)The Internal Corrosion for Pipelines—Advanced (Exam-Only Option) consists of a 2-hour written examination. Students seeking certification for Senior Internal Corrosion Technologist and are not enrolled in the Internal Corrosion for Pipelines—Advanced course will take the same written examination of-fered in the classroom course.

FeesMember—$690 Nonmember—$850

Internal Corrosion Specialist

To learn more about the new Internal Corrosion Specialist Certification, please refer to page 53.

New CerTIfICATION

www.nace.org/education

New COurse New COurse

32

PIPELINE CORROSION INTEGRITY MANAGEMENT PROGRAM

Pipeline Corrosion Assessment Field Techniques (P-CAFT)5-Day Classroom Course

1st – 4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThe Pipeline Corrosion Assessment Field Techniques (P-CAFT) course will cover corrosion basic principles and theory, field techniques, direct assessment, in-line inspection and hydro testing techniques, indirect in-spections, direct examination, safety and data documentation. The course is presented in a format of lecture,

discussion and group exercises. The course concludes with a written examination at the end of the week.

Who Should AttendThe P-CAFT course is designed for maintenance, service, tech-nical or field personnel responsible for the implementation and reporting of pipeline inspection activities. The P-CAFT course may be taken as stand-alone training for continued profession-al development or as part of the path toward the Pipeline Cor-rosion Integrity Management (PCIM Technician) certification

Course Highlights (including but not limited to) P-CAFT will focus on remediation technology and field tech-niques for carrying out integrity assessments. The goal is to prepare an individual to: • Accurately collect data for used for the evaluation and

monitoring of a pipeline corrosion integrity plan• Recognize pipeline anomalies• Make recommendations for resolving technical issues “in

the ditch”• Evaluate a pipeline in-service using ECDA and ICDA

methods and techniques• Recognize problems “in the ditch” and be able to collect the

data necessary for further engineering evaluation



3.6 CEUs

In-Line Inspection (ILI)5-Day Classroom Course1st – 4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThe ILI course will cover the ben-efits of utilizing In-Line-Inspection, selection of technologies related to operational parameters, opera-tional issues and evaluating data relevant to assessing fitness for service. The course is presented in a format of lecture, discussion and group exercises. The course concludes with a written examina-tion at the end of the week.

Who Should AttendIndividuals responsible for implementation and/or manage-ment of an integrity program for a pipeline system with an emphasis on integrity verification and maintenance optimiza-tion.

PrerequisitesNo prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in Physical Science or Engineering is recommended.

Course Highlights (including but not limited to) • ILI and its relationship to overall integrity assessment• Benefits and limitation of utilizing ILI• Industry standards, regulations and best practices• Managing the ILI process• ILI System Selection• Types of ILI tools• Metal loss tools• Tool selection• Pipe cleanliness• Types of anomalies or threats to be detected• Safety• Pipeline operation• In-Line Inspection • Excavation• Pressure reduction• Pipeline Operational Issues• Risks of ILI• Responsibilities of the Operator and/or service provider• Planning and scheduling• Preparing the pipeline• Running the tools• Tracking• Product flow

Parallel Path to Certification for• Pipeline Corrosion

Integrity Management (PCIM) Technician



Integrity Management (PCIM) Technologist




• Offshore considerations• ILI Data Analysis• Determining the validity of the ILI data• Interpretation/Analysis of the ILI data• Criteria for prioritizing and ranking anomalies for

investigation• Excavation and ILI verification report• Post ILI Activities• Data management• Managing results• Reassessment options/intervals• Feedback loop• Quality Management System• Quality system documentation and review• Quality control



3.6 CEUs

Direct Assessment (DA)5-Day Classroom Course1st – 4th days: 8 a.m. to 5 p.m.5th day: 8 a.m. to noon, unless otherwise noted

DescriptionThe Direct Assessment course will concentrate on internal, external and stress corrosion cracking direct as-sessment along with pre and post assessment, quality assurance, data analysis and integration, and reme-diation and mitigation activities. The course will also cover the benefits and limitations of Direct Assessment, its relationship to an overall integrity

assessment program and industry standards, regulations and best practices. The course is presented in a format of lecture, discussion and group exercises. The course concludes with a written examination at the end of the week.

Who Should AttendIndividuals responsible for implementation and/or management an integrity program for a pipeline system with an emphasis on integrity verification and maintenance optimization.

PrerequisitesNo prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in Physi-cal Science or Engineering is recommended.

Course Highlights (including but not limited to) • Direct Assessment in relationship to an overall

pipeline corrosion integrity management program• Benefits and limitation of DA• Industry standards related to DA• Comparison of DA to other pipeline integrity methods• Direct Assessment Phases• Pre-assessment• Indirect inspection• Direct examinations• Post assessment• External Corrosion Direct Assessment (ECDA)• Internal Corrosion Direct Assessment (ICDA)• Stress Corrosion Cracking Direct Assessment

(SCCDA)• Confirmatory Direct Assessment (DA)• Establishing corrosion rates• Reassessment options/intervals• Quality assurance• Management of change• Continuous improvement• Responsibilities of the Operator and/or service

provider



3.6 CEUs




New COurse



Pipeline Corrosion Integrity Management (PCIM)5-Day Classroom Course1st – 5th days: 8 a.m. to 5 p.m., unless otherwise noted

DescriptionThe Pipeline Corrosion Integrity Man-agement (PCIM) Course serves as the key training track for the PCIM profes-sional who is expected to focus on the implementation and management of an integrity program for a pipeline system. The course provides a com-prehensive up-to-date coverage of the various aspects of time-depen-dent deterioration threats to liquid and gas pipeline systems.

The training, which consists of classroom instruction and dis-cussion, will focus on interpreting integrity related data, per-forming an overall integrity assessment on a pipeline system, calculating and quantifying risk, and making recommendations to company management on risk management issues. The course concludes with a written exam at the end of the week.

Who Should AttendIndividuals responsible for implementation and/or management an integrity program for a pipeline system with an emphasis on integrity verification and maintenance optimization.

PrerequisitesNo prior training required, but 8 years work experience OR 4 years work experience AND 4-year degree in Physical Science or Engineering is recommended.

Course Highlights (including but not limited to) • Corrosion and pipeline integrity• Overview of CFR 49 and integrity requirements• Standards: managing system integrity (ILI and Hydrostatic

Testing) and direct assessment processes (ECDA, SCCDA, and ICDA)

• Threat identification and assessment• Selecting an integrity assessment method• Data collection, verification, integration and interpretation• Risk assessment and risk quantification and minimization

through corrosion control• Integrity verification/assessment• Technical challenges to pipeline integrity including pipeline

manufacturing, construction, operations and failure sources• Remediation activity and repair methods• Inspection and assessment intervals using remaining

strength and corrosion growth rates• Post integrity assessment risk analysis• Integrity management planning• Change management including integrity management,

performance, communication and quality control plans• Management perspectives and case studies



4.0 CEUs





MARINE INDUSTRY

NACE International offers comprehensive training for the corrosion professional working in either the fixed offshore or shipboard marine applications. The marine industry is subject to formidable operating conditions in a highly corrosive atmosphere impacted by such vari-ables as humidity, wind, temperature, airborne contaminants, loca-tion, and biological organisms.

The ability to minimize the impact of marine corrosion is crucial to protecting the strength, safety and life span of marine industry as-sets. NACE marine courses show students how to address these issues through inspection and maintenance planning that is also in compliance with regulatory and international standards.

Offshore Corrosion Assessment Training (O-CAT)To learn about the O-CAT course, please refer to page 5.

Shipboard Corrosion Assessment Training (S-CAT)To learn about the S-CAT course, please refer to pages 14-15.

CIP Level 2, Maritime EmphasisTo learn about the CIP Level 2, Maritime Emphasis course, please refer to pages 10-11.

CP 2—Cathodic Protection Technician-MaritimeTo learn about the CP2-Cathodic Protection-Maritime course, please refer to page 25.

Did You Know….That you can receive a discounted rate when you register for a course more than 35 days in advance of the start date?

Learn more about Advanced Member or Nonmember fees on page 51.


ONLINE SELF-STUDY TRAINING

NACE Online Training is a valuable and cost-effective method for continuous education and overall productivity enhance-ment that provides students with an easy to use and conve-nient way to learn industry and technology specific corrosion solutions. Online Training provides a customizable learning experience allowing the student to work at his/her own pace from work, home or on the road with unlimited access 24/7.

Corrosion in the Water and Wastewater Industry Course DescriptionThis online, self-paced course consists of eleven, 1-hour mod-ules that introduce the fundamentals of corrosion in the water and wastewater industry. Key areas of coverage include current design, construction, and operation and maintenance practices for key water and wastewater infrastructure components.

Students may either choose to complete the modules in sequen-tial order or those with more experience or with specific inter-ests may select the modules that would most benefit them in their career. Students will earn a certificate of completion upon suc-cessful achievement of the online quiz given at the end of each module.

Visit www.nace.org/wateronline for more information and to register for this course.

Who Should AttendAnyone who needs the ability to recognize and understand corro-sion in the water and wastewater industry.

PrerequisitesNo prior training or experience is required

Module Highlights

1 - Corrosion in the United StatesReview the findings, results and suggested actions of the 2002 Corrosion Report. Understand the range and cost of corrosion in the United States with an emphasis on the Water and Wastewa-ter Industry.

2 - Fundamentals of CorrosionLearn the fundamentals of corrosion and how to prevent fatal disasters caused by it. Basic principles of chemistry and phys-ics, such as atomic theory and molecular bonding are introduced to explain the science behind the corrosion cell, which is para-mount to understanding corrosion.

3 - Environments of CorrosionCorrosion rates vary depending on the material and environment. Examine the different environments in which corrosion occurs, the interaction of these environments with material, and the cor-responding effects on corrosion rates.

4 - Engineering MaterialsExamine how ductile iron, steel, aluminum, concrete and copper are used in modern engineering projects along with the applica-tions, characteristics and vulnerabilities of each material.

5 - Forms of CorrosionGeneralized, localized, pitting, crevice and intergranular corrosion types are discussed. Galvanic, erosion, de-alloying, stress, fatigue and temperature based corrosion are also covered; as are the ef-fects, causes and solutions for these various forms of corrosion.

6 - Methods of Corrosion ControlThis module introduces the methods for slowing or preventing cor-rosion. Corrosion mitigation techniques include material section, environment modification, coating application and cathodic pro-tection.

7 - Economics of Water CorrosionGain an understanding of the economics of water corrosion and the challenges corrosion presents to the industry. Detailed investi-gations cover the costs of water corrosion in pipes, storage tanks, reservoirs, and the impacts of wastewater corrosion.

8 - Water and Wastewater CorrosionThis module illustrates the physical and chemical properties that cause soil and water to act as corrosive agents. The most common forms of corrosion seen within the water and wastewater sectors are examined along with the mechanisms that accelerate water corrosion.

9 - Water and Wastewater EnvironmentsThis module looks at three environments in which water-based corrosion occurs. How the physical properties of a material and naturally occurring processes affect corrosion rates are discussed in subterranean, aqueous and atmospheric conditions.

10 - Material Selection for WaterLearn how material selection can reduce corrosion from water in multiple environments. Also covered are the chemical and physi-cal processes that cause corrosion in water environments, and how different materials affect these processes. Other topics in-clude common materials used to deter corrosion, and the ways in which these materials themselves corrode.

11 - Water and Wastewater Corrosion ControlUnderstand the reasons why preventing corrosion is beneficial from cost savings to increased health to reducing wasted water and how to approach implementing a water corrosion mitigation plan.

Fees$75 per module

11 PDHs upon completion of all eleven modules

NACE Operator Qualification Program (OQ)In cooperation with

Course DescriptionThe NACE OQ Training Program is a self-paced, online training and assessment program. The curriculum is designed to train pipeline professionals to meet the maintenance and safety requirements specified by the US Department of Transportation (DOT) Code of Federal Regulations (CFR) 142 parts 192 and 195.

New COurse


ONLINE SELF-STUDY TRAININGThe program is available in four modules: (1) All 40 covered tasks, (2) Cathodic Protection, (3) Internal Corrosion and (4) Coatings. All modules include the selected covered tasks as wells as corrosion assessment, safety and abnormal operating conditions. Students will complete an online written assess-ment and performance verification at the conclusion of each covered task.

Please visit www.nace.org/oq to view all 40 covered tasks and to learn more about the OQ performance verifications, and to register for this course.

Who Should AttendThis program is geared for employees who have little or no ex-perience in pipeline corrosion and/or require training that con-forms to PHMSA OQ requirements.

PrerequisitesNo prior training or experience is required.

Fees• All 40 Covered Tasks—$400• Cathodic Protection Module—$200• Coating Module—$200• Internal Corrosion Module—$200

NACE is the OQ provider for IUPAT Members with the support of:

I.C.I. Online—Intro to Coating InspectionCourse DescriptionThis online, self-paced course consists of eight, 30-minute modules that introduce the fundamentals of coatings as well as the purpose and role of a coating inspector on a coatings project. Students may either choose to complete the modules in sequential order or those with more experience or with spe-cific interests may select the modules that would most benefit them in their career. Students will earn a certificate of comple-tion upon successful achievement of the online quiz given at the end of each module.

Visit www.nace.org/cionline for more information and to register for this course.

Who Should AttendThe course is geared for the beginner who is new to the protec-tive coating and coating inspection industry.

PrerequisitesNo prior training or experience is required.

Module Highlights

1 - Role of the InspectorWhat does an inspector do and what value do they bring to a coatings project? This module will provide answers to that question by looking at the roles and responsibilities of a coat-ings inspector

2 - Test InstrumentationTesting plays a vital role to ensure that coatings are installed as specified. This module will describe some of the basic instru-ments used to monitor environmental conditions, evaluate the level of surface preparation and measure the thickness of the installed coating film.

3 - Coating SpecificationThe Coating Specification provides the “roadmap” for instal-lation of the coating. Some basic information needs to be in-cluded in the specification to make sure that the coatings in-spector has the tools to ensure that the coatings are installed as specified.

4 - Coating FundamentalsIt’s important to understand the basic fundamentals of coatings material to appreciate the inspector’s role in their application. This module will explore the components of a typical coating as well as the methods that coatings cure.

5 - Surface Preparation and StandardsThe inspector performs critical testing during this phase to en-sure the coatings to be installed have the best chance to reach their designed life-cycle. This module will explore the various methods of surface preparation and some of the critical as-pects required for a successful coating project.

6 - Application ProceduresCoatings may be applied using equipment ranging from a brush and roller, conventional airspray, and airless spray to sophis-ticalted plural component systems. This module will describe the various processes and equipment for coatings application.

7 - Coating DefectsUnfortunately defects may occur when the specification is not followed or other problems occurred during the coatings instal-lation. This module describes some of those defects and how to identify them.

8 - Pre-Job Conference The purpose of the Pre-Job Conference is to take a proactive approach to the coatings project. The Pre-Job Conference is an opportunity for all parties to ensure complete understand-ing of the project requirements by addressing any vagueness or ambiguities before the project starts. This module will explore a Pre-Job Conference and it’s project benefits.

Fees$75 per module

4 PDHs upon completion of all eight modules

New COurse

Is your NACE Certification

current?Top 5 reasons to renew your

NACE Certification

1. You worked hard to earn that certification. Why let it lapse?

2. Recertification demonstrates your commitment to your profession and continued mastery of your field.

3. Enjoy more job opportunities and greater earnings potential – certifications are becoming a preference when making hiring decisions in many organizations.

4. Continue to be included in the NACE certification database used by potential employers.

5. NACE Certifications are the most widely specified and recognized in the world!



CERTIFICATION PATHS AND REQUIREMENTS

NACE Coating Inspector Level 1—Certified

• Successful completion of CIP 1 course and exam (through Classroom course, or DVD with accompanying Exam Course 1) (page 7)

NACE Coating Inspector Bridge Endorsement

• Current CIP Level 1 certification status or higher• Successful completion of CIP One-Day Bridge Course

and exam (page 12)

NACE Coating Inspector Level 2—Marine Certified

• Current CIP Level 1 certification status

• Successful completion of CIP Level 2, Maritime Emphasis course and exam (page 10)

• Successful completion of Nuclear Power Plant Training for Coating Inspector course and exam (page 11)

• Document 160 hours of work with coatings focused projects for a nuclear power plant

• Current NACE CIP 1 Certification status or higher

• Complete and submit work experience documentation within 24 months of completing the exam

• Successful completion of Nuclear Power Plant Training for Coating Inspector exam (page 11)

• Document 400 hours of work with coatings focused projects for a nuclear power plant

• Current NACE CIP 1 Certification status or higher

• Complete and submit work experience documentation within 24 months of completing the exam

NACE Coating Inspector—Nuclear Facilities Certification Supplement (NFCS) Endorsement

NACE Coating Inspector Level 2—Certified


• Successful completion of CIP 2 course and exam (through Classroom course, or DVD with accompanying Exam Course 2) (page 7)

NACE Certified Coating Inspector—Level 3


• Successful completion of the CIP Level 3 Peer Review (page 8)

• Complete and submit work experience documentation to NACE

CIP Certification Courses CIP Specialty Courses

Path 1 Path 2

Coating Inspector Program (CIP)Students must successfully complete each course and its corresponding exam before moving on to the next level of the program.In order to be eligible for the related course certification, students must meet the requirements listed below.



CP 1—Cathodic Protection Tester

• Successful completion of CP 1 classroom course and exam or exam only option (page 19)

Coatings in Conjunction with Cathodic Protection

• Prerequisite: It is strongly recommended that students have CP 1—Cathodic Protection Tester certification or equivalent training

• Students will earn a Certificate of Completion upon successful achievement of the course and exam (page 26)

CP 2—Cathodic Protection Technician

• Successful completion of CP 2 classroom course and exam or exam-only option (page 20)

• Plus one of the following paths—

Path 1 • 3 years CP work experience

• High school diploma or GED

• CP 1 Certification or equivalent training

• Submit CP Technician certification application to NACE

Path 2 • 1 year of CP work experience

• 4-year Physical Science or Engineering Degree



Path 3• 2 years CP work experience

• 2-year post-high school training from approved Math or Science Technical/Trade School



CP 2—Technician – Maritime

• Successful completion of the CP 2 Maritime course and exam (page 25)


Path 1 • 3 years CP work experience, 1 year of which must be

in the maritime industry• High School diploma• CP 1 certification or equivalent training• Complete and submit CP 2 – Maritime certification

application and submit to NACE

Path 2 • 2 years CP work experience, 1 year of which must be

in the maritime industry• Associates degree from approved Math or Science

Technical / Science Trade School or 2 years post-high school training from approved Math or Science Technical / Science Trade School

• CP 1 certification or equivalent training• Complete and submit CP 2 – Maritime certification


Path 3• 1 year of CP work experience in the maritime industry• 4 year Physical Science or Engineering Degree• CP 1 certification or equivalent training• Complete and submit CP 2 – Maritime certification


CP Certification Courses


Cathodic Protection (CP)Students may choose to take the CP certification courses in succession or those with more experience and who meet the prerequi-sites may choose which course would benefit them in their career.Successful completion of the course and its corresponding exam is required to be eligible for the related certification. In addition, students must also meet the work experience and education require-ments listed below.


CP Interference

• Prerequisite: It is strongly recommended that students have CP 3—Cathodic Protection Technologist certification

• Students will earn a Certificate of Completion upon successful achievement of the course and exam (page 26)

41


CP Certification Courses


CP 3—Cathodic Protection Technologist

• Successful completion of CP 3 classroom course and exam or exam-only option (page 21)


Path 1

• 8 years CP work experience with progressively increasing technical responsibilities

• High school diploma or GED

• Algebra and logarithm training

• CP Technician certification or equivalent training

• Submit CP Technologist certification application to NACE

Path 2


• 2 year post high school training from an approved math or science technical/trade school including Algebra and logarithm training



Path 3


• 4 year Physical Science or Engineering degree



CP 4—Cathodic Protection Specialist

• Successful completion of CP 4 classroom course and exam or exam only option (page 22)


Path 1

• 12 years ADVANCED Cathodic Protection Work experience including 4 years in responsible charge

• 2 years post-high school training in Math or Science from an approved Technical/Trade School

• CP Technologist Certification OR equivalent training

• Submit CP Specialist certification application to NACE

Path 2

• 6 years ADVANCED Cathodic Protection work experience including 4 years in responsible charge

• 4 year Engineering or Physical Science Degree



Path 3

• 4 years ADVANCED Cathodic Protection work experience in responsible charge

• One of the following: ~ Bachelor’s degree in Engineering or Physical

Sciences and an advanced degree in Engineering or Physical Sciences that required a qualification exam

~ PE, P Eng., or equivalent ~ EIT registration or equivalent



42 www.nace.org/education42


Internal Corrosion Training & Certification

• Application – Internal Corrosion Technologist• High School Diploma• 4 years work experience including some

background in corrosion and pipeline operations• One of the following:

~ Internal Corrosion for Pipeline—Basic course and exam or exam only option (page 30)

~ Internal Corrosion Technologist exam

• Application – Internal Corrosion Technologist• Bachelor’s degree in Chemistry, Biology,

Microbiology, Chemical or Metallurgical Engineering

• 2 years work experience in internal corrosion in a pipeline environment

• One of the following:~ Internal Corrosion for Pipeline—Basic course

and exam or exam only option (page 30)~ Internal Corrosion Technologist exam

Internal Corrosion TechnologistPath 1 Path 2

• Application – Senior Internal Corrosion Technologist

• Bachelor’s degree in Chemical Engineering, Metallurgical Engineering, Chemistry Microbiology or Biology

• 4 years work experience in Internal Corrosion• Internal Corrosion for Pipeline—Advanced

course and exam or exam only option (page 30)

• Application – Senior Internal Corrosion Technologist

• Internal Corrosion Technologist certification• 8 years work experience in Internal Corrosion• Internal Corrosion for Pipeline – Advanced

course and exam or exam only option (page 30)

Senior Internal Corrosion TechnologistPath 1 Path 2

• Certification—Senior Internal Corrosion Technologist

• Successful completion of the Internal Corrosion Specialist Exam (page 30)

• Complete and submit Internal Corrosion Specialist Application to NACE

• 8 years internal corrosion work experience• One of the following:

~ Bachelor’s degree in Chemistry, Microbiology, Chemical Engineering, Metallurgical Engineering, or Biology

~ Engineer-in-Training registration or equivalent ~ Professional Engineer’s license

• Successful completion of the Internal Corrosion Specialist Exam

• Complete and submit Internal Corrosion Specialist Application to NACE

Internal Corrosion SpecialistPath 1 Path 2


S-CAT Technician• Successful completion of Shipboard

Corrosion Assessment Training (S-CAT) course and exam (page 14)

O-CAT Technician• Successful completion of Offshore

Corrosion Assessment Training (O-CAT) course and exam (page 5)

Corrosion Assessment Training & Certification


Pipeline Corrosion Integrity Management (PCIM) Training & Certification

• Successful completion Internal Corrosion for Pipelines- Basic classroom course and exam or exam only option (page 30)

• Successful completion of Pipeline Corrosion Assessment Field Techniques (P-CAFT) classroom course and exam (page 32)

• 2 years of pipeline work experience• Complete and submit PCIM Technician Certification Application to NACE

• Successful completion of Direct Assessment classroom course and exam (page 33)• Successful completion of In-Line Inspection classroom course and exam (page 32)• Successful completion of PCIM-Management classroom course and exam (page 34)• Complete and submit PCIM Technologist Certification Application to NACE

PCIM Technician

PCIM Technologist

PLUS ONE OF THE FOLLOWING PATHS:

Path 1• PCIM

Technician Certification (page 43)

Path 2• Senior

Corrosion Technologist Certification (page 47)

Path 3• Senior Internal

Corrosion Technologist Certification (page 42)

• CP 2—Cathodic Protection Technician Certification (page 40)

• CIP Level 2 Certification (page 39)

Path 4• 8 years

pipeline work experience

• High School diploma or GED

Path 5• 4 years pipeline

work experience• Bachelor’s

Degree in Engineering or Physical Science


Protective Coating Program Training & Certification

Option #1• Successful completion of PCS 1 Basic Principles

course and exam (page 15)• High school diploma or GED• 6 years work experience in Protective Coatings Field• Complete and submit Protective Coating

Technologist Application to NACE

Option #2• Successful completion of PCS 1 Basic Principles

course and exam (page 15)• Bachelor’s degree in Physical Science or

Engineering• 3 years work experience in Protective Coatings Field• Complete and submit Protective Coating

Technologist Application to NACE

Option #1• Successful completion of PCS 2 Advanced course

and exam (page 16)• Successful completion of PCS 3 Management course

and exam (page 16)• 4 years work experience in Protective Coatings Field• One of the following:

~ Bachelor’s degree in Physical Science or Engineering~ NACE Protective Coatings Technologist Certification~ NACE CIP Peer Certification~ Frosio Coating Inspector Level III~ SSPC Protective Coatings Specialist

• Complete and submit Protective Coating Specialist Application to NACE

Option #2• Successful completion of PCS 2 Advanced course

and exam (page 16)• Successful completion of PCS 3 Management course

and exam (page 16)• High school diploma or GED• 8 years work experience in Protective Coatings Field• Complete and submit Protective Coating Specialist

Application to NACE

Option #1• High school diploma or GED• 6 years work experience in Protective Coatings Field• Training equivalent to that contained in PCS 1

Basic Principles Course• Successful completion of the Protective Coating

Technologist Exam• Complete and submit Protective Coating Technologist

Application to NACE

Option #2• Bachelor’s degree in Physical Science or Engineering• 3 years work experience in Protective Coatings Field• Training equivalent to that contained in PCS 1

Basic Principles Course• Successful completion of the Protective Coating

Technologist Exam• Complete and submit Protective Coating Technologist

Application to NACE

Option #1• 12 years work experience in Protective Coatings

Field• High school diploma or GED• Successful completion of the Protective Coating

Specialist Exam• Complete and submit Protective Coating Specialist

Application to NACE

Option #2• 8 years work experience in Protective Coatings

Field• One of the following:

~ Bachelor’s degree in Physical Science or Engineering~ NACE Protective Coatings Technologist Certification~ NACE CIP Peer Certification~ Frosio Coating Inspector Level III~ SSPC Protective Coatings Specialist

• Successful completion of the Protective Coating Specialist Exam

• Complete and submit Protective Coating Specialist Application to NACE

Protective Coating Technologist

Protective Coating Specialist

Parallel Path(Certification through course work)


Traditional Path(Certification through certification exams)




• One of the following NACE certifications: ~ Certification – Chemical Treatment Specialist ~ Certification – Cathodic Protection Specialist

~ Certification – Materials Selection/Design Specialist ~ Certification – Protective Coating Specialist

• Successful completion of the Corrosion Specialist Exam• Complete and submit Corrosion Specialist Application to NACE

Corrosion Specialist

• Certification – Senior Corrosion Technologist (page 47)

• Successful completion of the Materials Selection/Design Specialist Exam

• Complete and submit Materials Selection/Design Specialist Application to NACE

• 4 years corrosion work experience in responsible charge• One of the following:

~ Bachelor’s degree in Physical Science or Engineering and an advanced degree in Physical Science or Engineering that required a qualification examination


• Successful completion of the Materials Selection/Design Specialist Exam• Complete and submit Materials Selection/Design Specialist Application to NACE

Materials Selection / Design SpecialistPath 1 Path 2

• Certification – Senior Corrosion Technologist (page 47)

• Successful completion of the Chemical Treatment Specialist Exam

• Complete and submit Chemical Treatment Specialist Application to NACE

• 4 years corrosion work experience in responsible charge• One of the following:

~ Bachelor’s degree in Physical Science or Engineering and an advanced degree in Physical Science or Engineering that required a qualification examination


• Successful completion of the Chemical Treatment Specialist Exam• Complete and submit Chemical Treatment Specialist Application to NACE

Chemical Treatment SpecialistPath 1 Path 2

Protective Coating Specialist• Please see page 44 for specific information on how to achieve this certification and parallel path options.

Cathodic Protection Specialist• Please see page 41 for specific information on how to achieve this certification.

Internal Corrosion Specialist• Please see page 42 for specific information on how to achieve this certification.

NACE Specialty CertificationsThese certifications are geared toward individuals who are experienced, knowledgeable, and capable of performing work at an advanced level in both the theory and practice of a particular area of corrosion and corrosion control. To obtain one of these five specialty certifications, you must first meet the requirements listed, then submit the corresponding application, and successfully complete the appropriate proctored exam.



NACE Generalist CertificationsGeneralist Certifications can be obtained in one of two ways, through Parallel Path or Traditional Path. The Parallel Path allows you to achieve certification through taking courses, passing the exams, and then submitting an application for one of the General-ist Certifications listed below. With the Traditional Path, you obtain certification by meeting work experience and/or education requirements, passing the appropriate exam, and then completing the application process.


• Successful completion of Basic Corrosion course and exam (see page 3)

• 2 years corrosion work experience

• Complete and submit Generalist Certification Ap-plication to NACE


• Successful completion of Basic Corrosion course and exam (see page 3) OR Corrosion Technician Certification

• One from Menu A

• One from Menu B


• Complete and submit Generalist Certification Application to NACE



• To verify work experience, complete and submit Generalist Certification Application to NACE prior to taking the Corrosion Technician exam

• Successful completion of Corrosion Technician exam



• Complete and submit Generalist Certification Application to NACE prior to taking the Corrosion Technologist exam

• Successful completion of Corrosion Technologist exam

Corrosion Technician(Geared towards an individual with little work experience but has some knowledge of corrosion and corrosion control)

Corrosion Technologist(Geared towards an individual with moderate experience and has some knowledge of corrosion and corrosion control)

Protective Coating Technologist• Please see page 44 for specific information on how to achieve this certification and parallel path options.

*see menus A & B at the bottom of page 47.




• 8 years corrosion work experience, including four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with 4 years work experience in responsible charge

• Complete and Submit Generalist Certification Application to NACE prior to taking the Senior Corrosion Technologist Exam

• Successful completion of the Senior Corrosion Technologist Exam

Senior Corrosion Technologist(Geared towards an experienced individual with practical knowledge in multiple areas of corrosion and its control)


Option #1• 8 years corrosion work experience, including

four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with 4 years work experience in responsible charge

• Successful completion of Basic Corrosion course and exam (page 3) OR Corrosion Technician Certification

• Successful completion of Designing for Corrosion Control course and exam (page 4)

• One from Menu A• One from Menu B• One additional course from Menu A,B, or C• Successful completion of Chemical Treatment

Specialist Exam OR Internal Corrosion for Pipeline Basic (page 30)

• Complete and Submit Generalist Certification Application to NACE

Option #2• 8 years corrosion work experience, including

four years experience in responsible charge OR Bachelor’s degree in Physical Science or Engineering with 4 years work experience in responsible charge

• Corrosion Technologist Certification• Successful completion of Designing for Corrosion

Control course and exam (page 4) • One from Menu A• One from Menu B• Successful completion of Chemical Treatment

Specialist Exam OR Internal Corrosion for Pipeline Basic (page 30)

• Complete and Submit Generalist Certification Application to NACE

Menu A• CP Tester course and exam• CP Technician course and exam*• CP Technologist course and

exam*• CP Specialist course and exam** must meet work experience requirements

Menu B• PCS 1 Basic Principles• CIP Level 1• PCS 2 Advancednote: you cannot obtain multiple credit toward certification from a single course

Menu C• Coatings in Conjunction with

Cathodic Protection

Successful completion of:



To uphold the integrity of your NACE Certification, you must renew your certification every three years. Renewal involves documentation of work experience and continuing professional development. NACE International will contact you 90 days before your certification expires.

It is the responsibility of persons certified by NACE International to apply for and complete the certification renewal process. Failure to receive a notice from NACE International shall not be accepted as reason for failure to apply and/or complete the renewal process.

Specialist Certifications Hours/year Work Experience Required (years)

Corrosion Specialist 20 1.5

Cathodic Protection Specialist 20 1.5

Chemical Treatment Specialist 20 1.5

Materials Selection/Design Specialist 20 1.5

Protective Coating Specialist 20 1.5

Internal Corrosion Specialist 20 1.5

Generalist Certifications

Corrosion Technician 8 1.5

Corrosion Technologist 8 1.5

Senior Corrosion Technologist 12 1.5

Protective Coating Technologist 8 1.5

Cathodic Protection Certifications

CP 1 Tester 8 1.5

CP 2 Technician 8 1.5

CP 2 Technician—Maritime 8 1.5

CP 3 Technologist 8 1.5

Coating Inspector Certifications

NACE Coating Inspector Level 1—Certified 1.5

NACE Coating Inspector Level 2—Certified 1.5

NACE Certified Coating Inspector—Level 3 1.5

NACE Certified Coating Inspector—Nuclear Facilities Certification Supplement 1.5

Internal Corrosion Certification

Internal Corrosion Technologist 12 1.5

Senior Internal Corrosion Technologist 12 1.5

Professional Development RequirementsProfessional development hours vary for certain levels of certification. The table below outlines the hours required for each certification type.

Renewal Period Renewal Fees

Every three (3) years Members—$140 per three yearsNonmembers—$350 per three years for all certifications

RENEWING YOUR NACE CERTIFICATION


Q: What action is required of me to renew my certification?A: Please note that it is your responsibility to know your expiration date. NACE will notify you when it is time to renew based on the con-

tact information we have on file for you. We will provide you with your access information to your NACE profile page at www.nace.org where you can apply for certification renewal.

Q: What qualifies as professional development?A: Professional development refers to educational activities that include, but are not limited to, attending corrosion related courses, semi-

nars, meetings, technical papers, webinars, or presentations.

Q: Which NACE Certifications offer a Parallel Path option?A: Corrosion Technician, Corrosion Technologist, Senior Corrosion Technologist, Protective Coating Technologist, and Protective Coating

Specialist. See the Certification at a Glance Section for more details.

Q: If I choose the Parallel Path option, do I still need to meet the work requirements?A: Yes, all work requirements must be met for each certification.

Q: How is work experience documented?A: Special reference forms are included with your application.

Q: Can I use work documentation that I previously turned in?A: Yes, if this documentation is used within one (1) year.

Q: What is the difference between “acceptable work experience” and “acceptable work experience in responsible charge?”A: Acceptable work experience” and “acceptable work experience in responsible charge” both refer to documented work experience in

the field of corrosion which includes: (a) the investigation of corrosion causes and mechanisms, (b) the investigation, design, and imple-mentation of corrosion control procedures, or (c) the teaching of corrosion related science. However, “acceptable work experience in responsible charge” should be at a level of responsibility requiring initiative, technical ability, and independent judgment.

Q: Are there any alternatives to actual “work experience” or “work experience in responsible charge?”A: There are no alternatives to “work experience” or “work experience in responsible charge.”

Q: Once I have successfully completed a course, how long do I have to apply it towards a certification?A: You have five (5) years to apply a course towards certification.

Q: Are there any time constraints to completion of your certification by exam?A: You have one (1) year from the time when your application is approved in which to take the examination.

Q: What is the NACE International Attestation?A: This is a document that attests to your knowledge that you understand the privileges and responsibilities which come along with NACE

International Certification. By signing the Attestation, you agree to adhere to certain standards and abide by certain work ethics. Failure to comply could result in disciplinary action.

Q: Do I have to renew my certification?A: Yes, all certifications renew every three (3) years. Go to the NACE Web site to renew online at www.nace.org.

Q: Do I have to pay a fee to renew my certification?A: Yes, every three (3) years you pay a fee to renew your certification—$140 for Members and $350 for Nonmembers. You no longer have

to pay Annual Maintenance Fees for your certification.

Q: How long can my file remain open after I have submitted my application paperwork?A: Files remain open for two years with no activity. Files older than two years with no activity will be closed.

Q: What happens if I do not renew my certification?A: NACE allows a three month grace period (90 days) after your certification expiration date before your record is marked as “terminated.”

You have up to five years to reinstate your certification and pay all fees in arrears. Any certification lapsed for more than five years will NOT be eligible for reinstatement and will require starting the program over from the beginning.

CERTIFICATION FAQS


REGISTRATION FEESMember Nonmember Member Nonmember

COATING INSPECTOR PROGRAM (CIP) Advance Registration Fees Standard Registration Fees

CIP Level 1 $1,770 $1,955 $1,930 $2,095

CIP Level 1 Exam Course $1,405 $1,545 $1,560 $1,685

CIP Level 2 $1,770 $1,955 $1,930 $2,095

CIP Level 2 Exam Course $1,405 $1,545 $1,560 $1,685

CIP Level 2, Maritime Emphasis $1,770 $1,955 $1,930 $2,095

CIP Level 3 Peer Review $925 $1,105 $1,120 $1,310

Nuclear Power Plant Training for Coating Inspectors $1,100 $1,285 $1,260 $1,425

CIP One Day Bridge Course $375 $510 $455 $550

GENERAL COATINGS

PCS 1 Basic Principles $850 $1,025 $1,005 $1,185

PCS 2 Advanced $850 $1,025 $1,005 $1,185

PCS 3 Management $1,395 $1,605 $1,580 $1,765

Pipeline Coating Applicator $2,795 $2,900 $3,115 $3,285

CATHODIC PROTECTION PROGRAM (CP)

CP 1-Cathodic Protection Tester $1,570 $1,755 $1,730 $1,915

CP 2-Cathodic Protection Technician $1,570 $1,755 $1,730 $1,915

CP 2-Cathodic Protection Technician–Marine $1,570 $1,755 $1,730 $1,915

CP 3-Cathodic Protection Technologist $1,380 $1,560 $1,535 $1,720

CP 4-Cathodic Protection Specialist $1,380 $1,560 $1,535 $1,720

Cathodic Protection Tester Exam Only Option–CP 1, CP 2, CP 3, CP 4 $690 $850

CP Interference $1,380 $1,560 $1,535 $1,720

Coatings in Conjunction with Cathodic Protection $1,570 $1,755 $1,730 $1,915

CORROSION ASSESSMENT TRAINING

Offshore Corrosion Assessment Training (O-CAT) $1,465 $1,650 $1,625 $1,810

Shipboard Corrosion Assessment Training (S-CAT) $1,465 $1,650 $1,625 $1,810

PIPELINES

PCIM–Management $1,830 $2,005 $1,985 $2,165

Internal Corrosion for Pipelines – Basic $1,745 $1,930 $1,905 $2,095

Internal Corrosion for Pipelines – Advanced $1,745 $1,930 $1,905 $2,095

Internal Corrosion for Pipelines (Exam Only Option)– Basic and Advanced $690 $850

Direct Assessment $1830 $2005 $1985 $2165

In-Line Inspection $1830 $2005 $1985 $2165

Pipeline Corrosion Field Assessment Techniques (P-CAFT) $1830 $2005 $1985 $2165

GENERAL EDUCATION

Basic Corrosion $1,025 $1,230 $1,210 $1,395

Corrosion Control in the Refining Industry $1,795 $1,980 $1,955 $2,140

Designing for Corrosion Control $1,025 $1,230 $1,210 $1,395

ONLINE—SELF STUDY Fees Per Module

I.C.I. Online $75

Corrosion in the Water and Wastewater Industry $75

Operator Qualification (OQ)—All 40 Covered Tasks $400

Operator Qualification (OQ)–Cathodic Protection, Coating and Internal Corrosion each $200

CD-ROMS Item # Member Nonmember

Basic Corrosion—Single User License-Includes 1 Basic Corrosion Study Manual 48350-01 $975 $1,155

Basic Corrosion—Five User License-Includes 5 Basic Corrosion Study Manuals 48350-05 $3,075 $3,610

CIP CD-ROM Set 1—Single User License (Multiple version available upon request) 44100 $390 $390

CIP CD-ROM Set 2—Single User License (Multiple version available upon request) 44200 $390 $390

Registration fees are subject to change without notice. For all courses held outside of the United States, please see note at the bottom of the page. To take advantage of the advance registration savings, registration form and payment must be received at NACE Headquarters 35 days prior to start date of course.


Class RegistrationTo qualify for Advanced Member or Advanced Nonmember fees, a completed registration form with payment must be received at NACE 35 days prior to the class date. Class registration fees include student manuals, course materials, refreshment breaks, and reference books where indicated. Attendees are responsible for their own expenses, including, but not limited to, hotel, airfare, and meals. Participants are responsible for making their own accommodation arrangements directly with the hotel. NACE regrets that it cannot be responsible for any loss or damages incurred as a result of cancellation of a course by NACE for any reason.

Fee Payments**All software license, class, and exam registration fees must be paid in U.S. dollars. For classes outside of North America, fees in local currencies may apply. Contact NACE Headquarters or the stated local contact before making final plans. For class or exam registrations, advance registration accompanied by full fee payment is required to guarantee a seat. Payment in full is due at the time of enrollment. NACE does not invoice for class registration. A confirmation letter will be mailed when payment is received with completed registration forms. Program fees are subject to change without advance notice.

Cancellation and Refund PolicyFor classes in Canada and the U.S., paid or guaranteed registrations cancelled in writing at least 35 calendar days in advance of a class will receive a full refund, less a $60 service fee. Paid or guaranteed registrations cancelled in writing 34 to 3 days before a class will receive a refund of 50% of the registration fee. No refunds or credit will be issued on cancellation requests received less than 3 days before a class begins. Based upon availability, transfer to another class is permitted one time, with the following fees: 35 or more days in advance of the start date, the fee is $45; 34-3 days before the start date, the fee is $115. Transfers may not be made less than 3 days before a class begins. All requests for transfer or cancellation must be submitted in writing. Exam Only fees and Exam Only Retake Fees are nonrefundable.

Software ReturnsThe CIP DVD Sets 1 and 2, the Basic Corrosion Course on CD, and the OQ Manual on CD are licensed as final sale items. No returns are accepted on these products with the exception of defective merchandise.

Software ShippingPurchaser pays actual shipping costs in addition to the license fee. For faster processing of your order, use a credit card for pay-ment, or contact NACE FirstService at +1 800-797-6223 for a shipping quote.

Equal OpportunityIt is the policy and practice of NACE to assure that no person will be discriminated against or be denied the benefits of any activity or program on the basis of the individual’s race, color, religious creed, sex, marital status, national origin, ancestry, sexual orienta-tion, or disability.

Continuing Education Units (CEUs)Course participants may receive CEUs. Refer to the description of each course on the NACE Web site (www.nace.org/education) for information on CEU credits.

MembershipA one-year membership is included in the Nonmember course fee, regardless of your membership status at the time of course registration. If you are a member at the time of registration but pay the Nonmember Fee, your membership will be extended for one year. This membership offer is only valid at the time you complete this form. Membership will be processed upon completion of the course, determination of eligibility, and once all payments have been processed. This $130 value includes a $12 subscription to materials Performance magazine. If you do not wish to take advantage of the one-year membership and subscription to materials Performance, then you must check the box marked “No” on the course registration form.

Registration & Licensing Fees for CDs and DVDsRegistration and license fees are subject to change without notice.

**NOTE: (1) NACE-approved Training Sponsors outside of the U.S. may have fees that vary from the fees listed in this guide, based upon regional economics and fees for similar technical courses in their respective regions. (2) Registration fees for Canadian courses have been adjusted to include GST/HST where applicable.

IMPORTANT INFORMATION

NACE International has been approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1760 Old Meadow Road, Suite 500, McLean, VA 22102. In obtaining this approval, NACE International has demonstrated that it complies with the ANSI/IACET I-2001 Standard which is widely recognized as the Standard of good practice internationally. As a result of their Authorized Provider sta-tus, NACE International is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.

tWO WAYS to register for a

nAce cOurSe1. Go Online to www.nace.org/eduschedule and select the

course you wish to take. Then choose your preferred course date and location and click on the Register link.

2. Contact the NACe First Service Department by calling toll free at +1 800 797 6223 (US and Canada) or worldwide at +1 281 228 6223.

for courses designated as Partner, Licensee or sponsored, please click on the course code to contact the Training sponsor for course pricing and registration. Additional fees may apply to the published pricing for courses held outside the united states.

Payment is due in full at the time of registration. Please have your credit card number, expiration date, security code, and name as it appears on the card available to register over the telephone or on the NACE website at www.nace.org. Please note: A physical mailing address is required in order to ship training material in advance for certain NACE courses.

NACE regrets that it cannot be responsible for any loss or damage incurred as a result of cancellation of a course for any reason. This includes, but is not limited to, airfare penalties and/or hotel penalties. Please contact First Service to check the status of a course before making any nonrefundable travel arrangements.

Please note: course fees, dates and locations are subject to change without notice. For the most up to date course schedule and information, visit www.nace.org/eduschedule.

First service Hours of OperationMonday – Thursday: 7 a.m. to 6:30 p.m. CST Friday: 7 a.m. to 5 p.m. CST

– OR –

NOW AVAILABLEInternal Corrosion Specialist CertificationThe launch of the new Internal Corrosion Specialist Certification exam completes the NACE Internal Corrosion training and certification program. Professionals seeking the Internal Corrosion Specialist certification should possess the skills and knowledge to successfully design, implement, evaluate and manage an internal corrosion integrity management program, regardless of industry.

Exam PrerequisitesCandidates must meet the education and work experience requirements from one of the two prerequisite paths listed on page 42, before registering for the Internal Corrosion Specialist Exam.

Knowledge and Task RequirmentsCandidates should possess the following skill and knowledge factors:

• Possess the skills and knowledge to perform the tasks of individuals certified at the Senior Internal Corrosion Technologist level

• Have a thorough understanding of electrochemical and corrosion principles, field testing, laboratory analysis, monitoring techniques, mitigation strategies and inspection methods

• Capable of designing and implementing an internal corrosion integrity management program that complies with applicable regulations and standards for various industries but with emphasis on oil and gas

• Capable of evaluating and managing maintenance and monitoring plans specific to the environment in which they are working (eg pipeline, cooling water systems, potable water systems, water treatment plants, processing plants and steam boilers) and determining standard operating procedures for maintenance and monitoring internal corrosion.

Visit www.nace.org/education to learn more about the Internal Corrosion Specialist Exam.


1440 South Creek DriveHouston, TX 77084-4906

Phone: 1 800-797-6223 (US/Canada) +1 281-228-6223 (Worldwide)

Fax: +1 281-228-6329Web: www.nace.org


Cursos

Documents

Transcript of Cursos