CuNiFe - ESMA Industrial Enterprisesesmagroup.com/products/Fluid Conveyance/Parker...
2
CuNiFe Corrosion resistant connectors for seawater systems Seawater systems impose special requirements for the connectors used. CuNiFe products, long-term, show a considerably higher durability than other materials. The CuNiFe programme from Parker offers a special corrosion resistant solution. ● Leakfree, soft sealed connection ● Seawater resistant material ● Easy and safe assembly ● With reliable EO-2 stainless steel functional nut Standards and Approvals: ● ISO 8434 ● DIN 2353 ● Germanischer Lloyd - Approved for light and heavy series - Nominal pressure: 100 bar - Tube O.D.: 6S-38S, 6L-42L - Temperature range: -25°C to +200°C ● Specified at major shipyards for various application areas Sample from the CuNiFe product programme ● G, GE, GAI, W, T and SV fittings with functional nuts/lock nuts in stainless steel ● EW, ET, EL, EGE and RED swivel adjustables with wire locked nuts in stainless steel ● ESV – weld bulkhead fitting with func- tional nuts in stainless steel material ● SKA, SKO, SKO-RB, SKOR, ASK fittings, also available for orbital welding ● Light and heavy series EO2-FORM F3 WorkCenter ● All tools in one machine ● Easily transportable and ready for operation at once ● Cold-forming of hydraulic tube-ends ● Elastomerically sealed high pressure tube connection using EO-2 seal element ● Suitable for EO tube fittings according to DIN EN ISO 8434-1 ● Tube dimensions (tube O.D. x wall thickness) – Exotic tube materials, such as CuNiFe or Duplex on request – Stainless steel tube 1.4571: 6x1 to 38x5 / 42x3 ESV G T EL SKO T are specially marked to support customers with certifications on request for the full heat code traceability information to EN10204 (similar to DIN 50049) ● This also includes an 3.1 B certificate on request Proven quality ● CuNiFe fittings are of one-piece construction; straight fittings are manufactured from cold drawn bar, shaped fittings are machined from high quality Parker forgings ● This gives maximum strength and integrity to Parker CuNiFe parts Protected quality ● CuNiFe fittings are pro- tected and identified right up to the point of use ● Fittings are carefully packed and printed with the part numbers ● This ensures security against damage, contamination and easy identification Assembly ● The successful Parker assembly principle: easy, fast, safe and dry ● Benefits of the functional nuts: low torque tightening through silver plated threads in nuts, consistently good assembly results Programme variety ● Use the Parker Tube Fittings range! ● The wide and well known, worldwide product range of Parker Ermeto gives you a lot of possibilities: ISO 8434-1 DIN-Connectors (incl. EO-2), ISO 8434-2 Triple-Lok®, ISO 8434-3 O-Lok®, ISO 8434-4 Weld fittings Material specification ● The copper alloy programme is made from CuNi10Fe1,6Mn (2.1972.11) material ● All products of this range are specified to ISO 1629 with FKM (Viton) sealing ● Fittings and nuts in CuNiFe as well as stainless steel Technical concept ● Special elastomerically sealed 24° fitting ● Bodies are in Copper-Nickel-Iron Alloys (CuNiFe) ● EO-2 functional nuts and swivel nuts are in stainless steel 1.4571 (alternatively, weld fittings are available) ● CuNi10Fe1,6Mn (2.1972.11) ● FKM soft sealing
Transcript of CuNiFe - ESMA Industrial Enterprisesesmagroup.com/products/Fluid Conveyance/Parker...
CuNiFe Corrosion resistant connectors for seawater systems
Seawater systems impose special requirements for the connectors used. CuNiFe products, long-term, show a considerably higher durability than other materials.
The CuNiFe programme from Parker offers a special corrosion resistant solution.
● Leakfree, soft sealed connection
● Seawater resistant material
● Easy and safe assembly
● With reliable EO-2 stainless steel functional nut
Standards and Approvals:
● ISO 8434
● DIN 2353
● Germanischer Lloyd - Approved for light and heavy series - Nominal pressure: 100 bar - Tube O.D.: 6S-38S, 6L-42L - Temperature range: -25°C to +200°C
● Specified at major shipyards for various application areas
Sample from the CuNiFe product programme
● G, GE, GAI, W, T and SV fittings with functional nuts/lock nuts in stainless steel
● EW, ET, EL, EGE and RED swivel adjustables with wire locked nuts in stainless steel
● ESV – weld bulkhead fitting with func- tional nuts in stainless steel material
● SKA, SKO, SKO-RB, SKOR, ASK fittings, also available for orbital welding
● Light and heavy series
EO2-FORM F3 WorkCenter
● All tools in one machine
● Easily transportable and ready for operation at once
● Cold-forming of hydraulic tube-ends
● Elastomerically sealed high pressure tube connection using EO-2 seal element
● Suitable for EO tube fittings according to DIN EN ISO 8434-1
● Tube dimensions (tube O.D. x wall thickness)
– Exotic tube materials, such as CuNiFe or Duplex on request
– Stainless steel tube 1.4571: 6x1 to 38x5 / 42x3
ESV
G
T
EL
SKO
T
ELEL
SKOSKO
ESVESV
TTTT
GG
are specially marked to support customers with certifications on request for the full heat code traceability information to EN10204 (similar to DIN 50049)
● This also includes an 3.1 B certificate on request
Proven quality
● CuNiFe fittings are of one-piece construction; straight fittings are manufactured from cold drawn bar, shaped fittings are machined from high quality Parker forgings
● This gives maximum strength and integrity to Parker CuNiFe parts
Protected quality
● CuNiFe fittings are pro- tected and identified right up to the point of use
● Fittings are carefully packed and printed with the part numbers
● This ensures security against damage, contamination and easy identification
Assembly
● The successful Parker assembly principle: easy, fast, safe and dry
● Benefits of the functional nuts: low torque tightening through silver plated threads in nuts, consistently good assembly results
Programme variety
● Use the Parker Tube Fittings range!
● The wide and well known, worldwide product range of Parker Ermeto gives you a lot of possibilities: ISO 8434-1 DIN-Connectors (incl. EO-2), ISO 8434-2 Triple-Lok®, ISO 8434-3 O-Lok®, ISO 8434-4 Weld fittings
Material specification
● The copper alloy programme is made from CuNi10Fe1,6Mn (2.1972.11) material
● All products of this range are specified to ISO 1629 with FKM (Viton) sealing
● Fittings and nuts in CuNiFe as well as stainless steel
Technical concept
● Special elastomerically sealed 24° fitting
● Bodies are in Copper-Nickel-Iron Alloys (CuNiFe)
● EO-2 functional nuts and swivel nuts are in stainless steel 1.4571 (alternatively, weld fittings are available)
● CuNi10Fe1,6Mn (2.1972.11)
● FKM soft sealing
Internet: http://www.parker.com/europe
Parker Hannifi n Ges. mbHA - 2700 Wiener NeustadtTel: +43 (0) 26 22 23 501Fax: +43 (0) 26 22 66 212
Parker Hannifi n CorporationAE - Abu DhabiTel: +971 2 678 8587Fax: +971 2 679 3812
Parker Hannifi n CorporationAZPARAZ - 370 000 BakuTel/Fax: +994 129 83 966
Parker Hannifi n S.A.-N.V.B - 1400 NivellesTel: +32 (0) 67 280 900Fax: +32 (0) 67 280 999
Parker Hannifi n s.r.o.CZ - 250 67 KlecanyTel: +420 284 083 111Fax: +420 284 083 112
Parker Hannifi n GmbH & Co. KGD - 41564 KaarstTel: +49 (0) 2131 40 16 0Fax: +49 (0) 2131 40 16 91 99
Parker Hannifi n Danmark A/SDK - 2750 BallerupTel: +45 43 56 04 00Fax: +45 43 73 31 07
Parker Hannifi n España S.AE - 28850 Torrejón de Ardoz(Madrid)Tel: +34 91 675 73 00Fax: +34 91 675 77 11
Parker Hannifi n CorporationEG - CairoTel: +20 2 519 4018Fax: +20 2 519 0605
Parker Hannifi n Sp.z o.o.PL - 02-235 WarszawaTel: +48 (0) 22 573 24 00Fax: +48 (0) 22 573 24 03
Parker Hannifi n Portugal LdaPT - 4450-625 Leça da PalmeiraTel: +351 22 999 7360Fax: +351 22 996 1527
Parker Hannifi n CorporationHidro Consulting Impex SrlRO - 00001 BucharestTel: +40 21 252 1382Fax: +40 21 252 3381
Parker Hannifi n CorporationRU - 123001 Moscow Tel: +7 095 234 0054Fax: +7 095 234 0528
Parker Hannifi n CorporationRU - 693000 Yuzhno-SakhalinskTel/Fax: + 7 4242 727 242
Parker Hannifi n ABSE - 163 08 SpångaTel: +46 (0) 8 5979 5000Fax: +46 (0) 8 5979 5110
Parker Hannifi n CorporationSI - 8000 Novo MestoTel: +386 (7) 337 6650Fax: +386 (7) 337 6651
Parker Hannifi n CorporationTR - 34067 Merter/IstanbulTel: +90 212 482 91 06/07Fax: +90 212 482 91 10
Parker Hannifi n CorporationUA - 01004 KievTel: +380 (0) 44 2207 432Fax: +380 (0) 44 2206 534
Parker Hannifi n AfricaZA - Kempton ParkTel: +27 11 961 0700Fax: +27 11 392 7213
Parker Hannifi n France SASF - 74130 Contamine-sur-ArveTel: +33 (0) 4 50 25 80 25Fax: +33 (0) 4 50 97 86 60
Parker Hannifi n OyFI - 01520 VantaaTel: +358 (0) 9 476 731Fax: +358 (0) 9 476 732 00
Parker Hannifi n plcGB - Derby DE24 8JATel: +44 (0) 1332 36 56 31Fax: +44 (0) 1332 29 21 46
Parker Hannifi n CorporationGR - 171 21 AthensTel: +30 210 933 6450Fax: +30 210 933 6451
Parker Hannifi n CorporationH - 1149 BudapestTel: +36 (1) 220 4155Fax: +36 (1) 422 1525
Parker Hannifi n S.p.A.I - 20094 Corsico (MI)Tel: +39 02 451 921Fax: +39 02 447 9340
Parker Sales Ireland LtdIE - Blackrock, Co. DublinTel: +353 (0) 1 293 9999Fax: +353 (0) 1 293 9900
Parker Hannifi n CorporationGateway Ventures Ca Ltd.KZ - 480100 AlmatyTel: +7 327 2 543 081Fax: +7 327 2 541 100
Parker Hannifi n A/SN - 1402 SkiTel: +47 64 91 10 00Fax: +47 64 91 10 90
Parker Hannifi n B.V.NL - 7570 AT OldenzaalTel: +31 (0) 541 585 000Fax: +31 (0) 541 585 459
● Shipyards
● Offshore
● Shipbuilding
● Seawater desalination
Value Added Services:
Breadman
Technical Services
Kitting
Parker Store
Hose Doctor
Bus
ines
s ca
rd o
r co
mpa
ny s
tam
p
Parker in Europe
For further information on other Parker Products, call the European Product Information Centre free of charge on 00800 27 27 5374.
Catalogue 4104-1/UK© 2006 Parker Hannifi n/0206
PlantijnCasparie 0206
CuNiFe – Copper-Nickel-Iron AlloysDIN-Connectors
Bulletin 4104-1/UK
![kmstechnologies.com¼… · 10−1 100 101 102 10−2 10−1 t [s] step response [mV/km] seawater air, seawater air, seawater, sediments air, seawater, sediments, reservoir 100 102](https://static.fdocuments.net/doc/165x107/5ed9d12ffc45a253ed575c3b/-10a1-100-101-102-10a2-10a1-t-s-step-response-mvkm-seawater-air-seawater.jpg)
