CT24V/CT30V VerTiCal asphalT heaTer and sTorage sysTem

CT24V/CT30V VerTiCal asphalT heaTer and sTorage sysTem

Features:• Simple,economicaldesign

• Rust-freealuminumjacket

• High-densitymineralwoolinsulation

• 23,690galto29,816gal(89,675Lto112,863L)capacity

43 ft

6 1 ⁄2

in(1

3,27

1 m

m)

11 ft 11.5 in(3,645 mm)

12 ft

6 in

(3,8

10 m

m)

CT24V/CT30V SpeCifiCaTionS

EffectiveDate:October2009.Productspecificationsandpricesaresubjecttochangewithoutnoticeorobligation.Thephotographsand/ordrawingsinthisdocumentareforillustrativepurposesonly.RefertotheappropriateOperator’sManualforinstructionsontheproperuseofthisequipment.FailuretofollowtheappropriateOperator’sManualwhenusingourequipmentortootherwiseactirresponsiblymayresultinseriousinjuryordeath.TheonlywarrantyapplicabletoourequipmentisthestandardwrittenwarrantyapplicabletotheparticularproductandsaleandTerexmakesnootherwarranty,expressorimplied.Productsandserviceslistedmaybetrademarks,servicemarksortradenamesofTerexCorporationand/oritssubsidiariesintheUSAandothercountries.Allrightsarereserved.TerexisaregisteredtrademarkofTerexCorporationintheUSAandmanyothercountries.Copyright2009TerexCorporation.

Important Note: All electrical specifications used herein refer to U.S. standards of voltage and frequency. Any electrical equipment that is factory-installed will be compatible with power availability requirements of any customer’s country.

Secondary tanks, handrails and platforms are optional.

Model Capacities Estimated Shipping Weight with mixer installed

CT24 23,690 gal (89,675 L) 26,900 lb (12,204 kg)

CT30 29,816 gal (112,863 L) 30,600 lb (13,880 kg)

Model Transport Height Transport Width Length

CT24 12 ft 6 in 11 ft 11.5 in 35 ft 6.5 in (3,810 mm) (3,645 mm) (10,833 mm)

CT30 12 ft 6 in 11 ft 11.5 in 43 ft 6.5 in (3,810 mm) (3,645 mm) (13,271 mm)

Model Inside Tank Diameter Erect Height

CT24 11 ft 5 in (3,480 mm) 35 ft 6.5 in (10,833 mm)

CT30 11 ft 5 in (3,480 mm) 43 ft 6.5 in (13,271 mm)

Dimensions

Piping, valving and jacketed lines to interconnect 3 in (76 mm) unloading pump to additional storage tanks.

3 in (76 mm) hot-oil jacketed asphalt piping between tank and plant pump, and plant pump to drain including pipe support and flex line hoses.

Piping, valving and jacketed lines to interconnect 2 in (51 mm) or 3 in (76 mm) plant pump to additional storage tanks.

Interconnecting hot-oil jacketed asphalt piping between additional asphalt tanks.

Combination hot oil/gas heater.

3 in (76 mm) skid-mounted, unloading pump with 15 hp (11 kW) motor and v-belt drive.

Top-entry vertical mixer complete with axial flow impellers and electric motor drive.

High-level alarm system.

optional equipment

Tank has a single compartment and an 11 ft 5 in (3,480 mm) inside diameter.

Tank is fabricated from 0.25 in (6 mm) steel with sloped top and is insulated with 3 in (76 mm) thick high-density mineral wool insulation covered with a 0.025 in (.63 mm) embossed aluminum jacket.

Tank is constructed with a 0.25 in (6 mm) thick flat bottom; concrete foundation required.

An external ladder and a 4 in (102 mm) internal overflow/vent pipe are standard. Also standard is a 3 in (76 mm) flanged fill inlet, a 3 in (76 mm) supply outlet, a 3 in (76 mm) flanged return inlet, and a 2 in (51 mm) threaded drain outlet with shut-off valve.

Tank includes a liquid level gauge for visual monitoring of tank’s contents and caged ladder and top hand rails with kick plate.

Tank

Internal heating hot-oil coils include an adjustable, indicating-type temperature control with drywell socket wired to a hot-oil solenoid valve to control temperature of liquid asphalt by controlling flow of the hot oil in the coils.

Heating System

TerexRoadbuildingP.O.Box1985,OklahomaCity,OK73101(405)787.60201-888-TEREXRBwww.terexrb.com