Csr Final11 12

CURRENT SCHEDULE OF RATES 2011-2012

I N D E X

Chapter Classification of Items Page No.

1 General Notes I VI

2 Building Work.

1 4

5 --

6 8

9 12

13 27

28 30

31 32

33 --

34 42

43 44

45 --

46 56

57 73

74 75

76 83

84 86

87 90

91 100

101 135

136 138

139 170

22 Bd-W Miscellaneous

a) General Pest control 171 --

b) Guniting 172 173

c) Fencing Work 174 176

d) Dismentaling 177 186

e) Antitermite and Pest control 187 190

1 Bd-A Excavation

2 Bd-B Pile Foundation

3 Bd-C Structural Steel Work

4 Bd-E Plain Cement Concrete

5 Bd-F Reinforcement Cement Concrete

6 Bd-G Brick Work

7 Bd-H Stone Masonary

8 Bd-I Cement Concrete Hollow Block Masonary

9 BD-J Water Proofing

10 BD-J-1 Repairs & Rehabilitation

11 Bd-K Expansion Joints

12 Bd-L Plastering and Pointing

13 Bd-M Paving , Flooring and Dado

14 Bd-N Wood Finish

15 Bd-O Oil Painting

16 Bd-P Colour/White Washing , Distempering

17 Bd-Q Wood Work

18 Bd-R Roofing and Ceiling

19 Bd-T Doors and Windows

20 Bd-U Iron Work

21 Bd-V Water Supply and Sanitary Fittings

Chapter Classification of Items Page No.

3 BR Bridge Works 191 221

4 CD Cross Drainage Works 222 225

5 RD Road Works

226 233

234 240

241 258

259 281

282 -

283 307

6 Survey Work 308 323

7 Material Rates 324 333

8 Labour Rates 334 -

9 Transportation Rates 335 336

10 337 338

11 Machinary hire charges 339 340

12 341 -

13 Approval to C.S.R. 2011- 12 342 -

5(A) Excavation & Embankment

5(B) WBM Road Construction

5(C) Asphaltic Construction

5(D) Concrete Pavement

5(E) Protection Work

5(F) Road Furniture

Rates for Loading & Unloading , Stacking & Transportation, Materials

Consumption Of Cement for different grades of concrete

GENERAL NOTES

1)

2)

a) Notified Tribal areas or HiIly or inaccessible areas 10%

b) Corporation areas 5%

c) Municipal Council areas 2%

d) Sugar cane producing areas 5%

e) Jail premises 15%

f) 20%

A)

B)

C)

The schedule of rates for the year 2011 - 2012 is applicable for Public Works Region, Nagpur as per circular No. TS /SENAG ./ CSR / 9473 / 2011 dated 17 /09/ 2011 with effect from 01 /09/ 2011

For the rates in notified Tribal areas, Hilly and inaccessible areas, corporation area, Municipal Council area, Sugar producing area, Jail premises and naxalite affected area an increase of percentage over schedule of rates prescribed as follows.The increase is not applicable over Royalty and Insurance charges in the item.

Naxalite affected area ( For all works in Gadchiroli District.)(As per Govt. of Maharashtra, GAD letter No.VVK-2009/CR 102/Desk-1415 dated 31/12/2009.)

( i ) The Superintending Engineers should specify the sugarcane producing areas & tribal areas under their circle.

( ii ) If Jail premises is situated in Corporation / Municiple area, an increase of 5% or 2% respectively shall not be added.

( iii ) In Gadchiroli District for Notified Trible area or Hilly or inaccessible area, an increase shall be (10% + 20%) = 30%

If the specified material is supplied by the Department the above percentage shall be applied on the cost of item after deducting the cost of specified material including VAT as applicable as per note No. 3 below.

If the specified material is to be brought by the Contractor the above percentage shall be applied to the cost of item directly.

Items which are not included in this schedule of rates shall be adopted from schedule of rates for National Highway works Nagpur Region for the corrosponding year.

3)

Sr. No. Material

Rates Proposed for 2011-12

1 2

1 Cement Rs.4800/- Per M.T.

2 Mild Steel Rs. 40300/-Per M.T.

3 TMT / HYSD Steel Bars Rs. 41300/-Per M.T.

4 Structural steel Rs. 40500/-Per M.T.

5 Rs 38604/-Per M.T.

(Ex-Refinery Mumbai)6 Rs 42466/-Per M.T.




(Ex-Refinery Mumbai)

10 Rs 45877/-Per M.T.

(Ex-Refinery Mumbai)

11 Rs 38694/-Per M.T.

(Ex-Plant Vashi- Mumbai)

a)

b) The rates of cement and steel are applicable at District & Taluka headquarters.

(II)

Schedule of rates are based on the following rates of materials inclusive of VAT at the rate of 12.5% for Cement / Bitumen & Emulsion & 5% for Steel.

Rates of material inclusive of VAT at the rate of 12.5% for Cement & Bitumen & 5% for Steel

Bitumen Bulk VG-10 (80/100)

Bitumen Packed VG-10 (80/100) Bitumen Bulk VG-30 (60/70)

Bitumen Packed VG-30 (60/70)

Bitumen Bulk VG-40 (30/40)

Bitumen Packed VG-40 (30/40)

Medium setting Hincol Emulsion Packed

The rates of bulk / packed Bitumen adopted for the items of bituminous works are based on the prevailing rates on 01.08.2011 Exrefinery Mumbai .The rates of Medium setting Hincol Emulsion for packed drums are based on the prevailing Rates on 16/08/2011 at Ex-Refinery Vashi-Mumbai .Subsequent increase / decrease if any in these rates shall be accounted for in the analysis of the items while framing estimates.

4)

5)

6)

7)

8)

9)

10) Building Works :-

Sr. No Section Item Percentage Increase

i 3 1

ii BDF 1 0.25

iii BDJ 3 1

iv BDL 3 1

v BDM 3 1

vi BDM 1 0.25

References of P.W.D. Standard Specifications / M.O.S.T. specifications are mentioned in bracket below description of the items.

(a) For specific tests like taking bores, span load tests, plate load test etc. which are not included in the rate analysis of item.Estimates for these test will be prepared on the basis of rates approved by Supdt, Engr. Vigilance & Quality Control, Nagpur or D.S.R. approved by MERI & accordingly payment shall be made.

(b) For angle boring & drilling in standing water the rate will be 1.5 times the usual drilling charges.

Royalty charges are included in the rates of material .

The charges towards labour amenities and quality control tests are considered in the scheduled rates.

M.VAT as applicable is already considered for the different item of works in Schedule of Rates.

The Rates are inclusive of insurance, in the schedule of rates .

a) For building works, basic lead upto 5 Kms. is considered for all completed items.

b) The floor is designated by the space contained within the top of the virgin slab / roof covering below to the top of the virgin slab / roof covering above.

c(i) for every additonal floor percentage increase in the rates shall be considered for the items in the following section as given in table without deducting the cost of cement and steel.

For Every Floor up to 4th Floor

For Every Floor above 4th Floor

BDF, BDG

R.C.C. B.B.Masonry

M.S./HYSD/TMT Reinforcement

Water Proofing Treatement

Plastering,Poiinting

Flooring Dado skirting treads ( except Ceramic tiles,Glazed tiles)Ceramic tiles, Glazed tiles,flooring dado skirting

Sr. No Section Item Percentage Increase

vii BDO 3 1

1 1

viii BDR 3 1

ix BDT 1 0.25

x 1 0.25

xi BDV 1 0.25

xii - 1 0.25

The Clay Bricks can be used for Maintenance Work only.

(IV)

For Every Floor up to 4th Floor

For Every Floor above 4th Floor

a) External Painting

b) Internal Painting

Mangolare tile roof,Ridges Ceiling

Weather Shade Replacing External Window shutter using scaffolding

BDU /BDC

Structural Steel Work,Tubular trusses

Soil,waste,vent and rain water pipes and sanitary wares etc.

Item not covered under Sr.No. i to xi above

Note : For external plaster, plumbing and painting works add 2 % more over the percentage mention at Sr. No. IV, VII & IX above.

c (ii) The precentages increase in rate as above should be on the rate of Current Schedule of Rate for that item.

c (iii) Items to be carried out above terrace such as water proofing treatment on terrace, water storage tank, parapet wall with coping , staircase, lift room with slab, plastering painting etc required for the completion of building are assumed to be the items of its lower floor.

d) In Nagpur Corporation area and Chandrapur Municipal area the use of clay bricks is prohibited on original works. For such works only fly-ash bricks shall be used , except for foundation of load bearing structures.

i) The pattern of fixing flooring tiles / stones shall be got approved from Dy. Chief Architect/S E.

Fixtures and Fastenings

FOR DOORS

Chromium Plated 2%

Aluminium Oxidised / Stainless steel 5%

Stainless steel with matt finish 6%

Brass 20%

Brass Oxidised 23%

FOR WINDOWS

Chromium Plated 1%

Aluminium Oxidised / Stainless steel 3%

Stainless steel with matt finish 4%

Brass 15%

Brass Oxidised 17%

e) The use of wooden centering & formwork including wooden props is prohibited. Only plywood or steel formwork is to be used with steel props.

f) With a view to conserve the natural resources, the use of country teak wood for doors and windows shall be avoided as for as possible, except for doors located on the external face of the building.

g) For the items of oil painting, distempering under Bd - 0 & Bd - P, the sample should be approved by Executive Engineer & a note regarding make / Company of approved sample should be taken by concerned Junior Engineer in measurement book. Unless that is done the measurement should not be treated as complete.

h) False celling shall be of Gypsum Board only, for using any other suitable material for false celling S E's permission shall be sought.

Items of doors and windows with Iron Oxidised fixtures and fastenings are considered. For other types of fixtures and fastenings add percentage as given below per square metre rate.

11) Road Works,.

12) For bridge work and C.D. works basic lead of 5 Km. is considered.

13 ) Additional lift for bridge items :-

Nil

3.50%

14) Works in Foul Condition

15) Hot Mix Hot Laid Bituminous Works

(VI)

a) Rates for collection of material for road work, are at quarry site with lead upto 50 mtrs. Lead charges will have to be considered separately while preparing the estimate for road work. For concrete pavement items basic lead of 5 km is considered

For working out rates for items with leads more than 5 km. the estimates should be prepared for actual leads deducting initial lead charges of 5 km. for all completed items except items of road work.

For additional lift for various bridge items as per list given below , rate shall be increased in percentage given below. Lift is to be measured with respect to common datum level for raft foundation the datum level shall be raft top. For other type of foundation avarage bed level shall be treated as datum.

a) Pier ,Abutment,Returns, Wing wall,pier cap,Box Returns.Upto 4.00m

b) For every additional 2.00 m beyond 4.00 m from datum

a) For the works in foul conditions the rate for excavation will be increased by 25% over the scheduled rates of excavation.

b) For other items required to be executed in foul condition upto Ground Level / Bed Level the rate shall be increased by 5% over schedule rates of individual items of DSR. This increase is over and above the increase admissible under note 2.

c) The above hike in rates of (a) & (b) shall be subject to the express condition that the prior approval of Superintending Engineer is obtained. The foul condition shall be certified by Incharge Executive Engineer.

a) The items of hot mix hot laid bituminous works are excluding transportation of bulk bitumen from refinery to plant site. Cost of bitumen considered in these items is as rates described in note (3) under column 3 (inclusive of VAT 12.5%) at Mumbai refinery.

b) For hot mix hot laid B.T. items rates do not include any initial lead for crushed metal as well as for hot mix material. Lead for transportation of crushed metal from quarry to plant site and lead of transportation of hot mix material from plant to work site shall be added separately.

c) For transportation of Hot Mix Material from plant to work site , the loose quantity of Hot Mix Material shall be considered while preparing the estimate.

12

BD - A : EXCAVATIONDESCRIPTION OF ITEMS UNIT

Completed Labour

A) i. Lift upto 1.5 m. Cu.m 98.00 98.00

ii. Lift above 1.5 m to 3.00 m.Depth Cu.m 106.00 106.00

iii Lift above 3.00 m. Depth Cu.m 115.00 115.00

B) Including Dewatering

i. Lift upto 1.5 m. Cu.m 102.00 102.00


iii Lift above 3.00 m. Depth Cu.m 118.00 118.00Spec.No. : Bd.A.1/Page No.259

A) i. Lift upto 1.5 m. Cu.m 110.00 110.00




i. Lift upto 1.5 m. Cu.m 115.00 115.00



Spec. No. : Bd.A. 2/Page No. 259

SR.NO. & CODE

NO.

RATES FOR 2011-2012 (In Rs)

1

BDA

1

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete.

2

BDA 2

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking or spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.

13

DESCRIPTION OF ITEMS UNIT

Completed Labour

SR.NO. & CODE

NO.


A) i. Lift upto 1.5 m. Cu.m 119.00 119.00




i. Lift upto 1.5 m. Cu.m 125.00 125.00




A) i. Lift upto 1.5 m. Cu.m 268.00 268.00



i. Lift upto 1.5 m. Cu.m 271.00 271.00



3 BDA

3

Excavation for foundation in Hard Murum and boulders including removing the excavated materials upto a distance of 50 meters, beyond the building area and stacking or spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.

4 BDA 4

Excavation for foundation in soft rock, and old cement or lime masonry foundations including removing the excavated materials upto a distance of 50 meters beyond the building area and stacking as directed including preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting etc.complete.

14


Completed Labour

SR.NO. & CODE

NO.


A) i. Lift upto 1.5 m. Cu.m 390.00 280.00



i. Lift upto 1.5 m. Cu.m 395.00 281.00



A) i. Lift upto 1.5 m. Cu.m 475.00 428.00



i. Lift upto 1.5 m. Cu.m 478.00 430.00



Cu.m. 49.00 49.00

5 BDA

5

Excavation for foundation in hard rock by blasting including trimming and levelling the bed by chiselling wherever necessary, and removing the excavated materials and stacking it in measurable heaps within a distance of 50 metres beyond the building area including preparing the bed for foundation and necessary back filling, watering, ramming, etc. complete.

6 BDA

6

Excavation for foundation in hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated materials and stacking it in measurable heaps within a distance of 50 meters beyond the building area, including preparing the bed for foundation and necessary back filling, watering, ramming, etc. complete.

7 BDA

10

Filling in plinth and floors with approved excavated materials in 15 cm. to 20 cm. layers including watering and compaction complete.

15


Completed Labour

SR.NO. & CODE

NO.



Cu.m. 270.00 53.00


Cu.m. 295.00 53.00


Cu.m. 443.00 91.00

8 BDA

11

Filling in plinth and floors with contractors approved material / murum / stone dust in 15cm. to 20cm. layers including watering and compaction complete.( Including Royalty)

9

BDA

13

Providing and filling in the foundation and plinth with sand of approved quality including watering, compaction complete. ( Including Royalty)

10 BDA

14

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete. ( Including Royalty)

Spec. No. : As directed by Engineer-in-charge.

5

BD - B : PILE FOUNDATIONDESCRIPTION OF ITEMS UNIT

Completed Labour

1

i) 20 cm diameter M-20 grade Rmt. 325.00 146.00

M-25 grade Rmt. 335.00 146.00

ii) 25 cm diameter M-20 grade Rmt. 484.00 154.00

M-25 grade Rmt. 492.00 156.00

iii) 30 cm diameter M-20 grade Rmt. 596.00 161.00

M-25 grade Rmt. 610.00 161.00

iv) 37.50 cm diameter M-20 grade Rmt. 810.00 172.00

M-25 grade Rmt. 830.00 172.00

2

i) 30 cm diameter

M-20 grade Rmt. 625.00 168.00

M-25 grade Rmt. 640.00 168.00

ii) 37.50 cm diameter M-20 grade Rmt. 950.00 180.00

M-25 grade Rmt. 980.00 180.00

SR.NO. & CODE

NO.


Providing single under reamed piles of specified diameter with following grade of concrete including boring, under reaming in all sorts of soils, filling the bulb and stem with C.C.mix (excluding steel reinforcement) as per detailed specification and drawings etc. complete.

Spec. No. : I.S. 2911 – Part I 1964 Clause No. 6.1.5.

Providing double under reamed piles of specified diameter with following grade of concrete including boring, under reaming in all sorts of soils filling the bulbs and stem with C.C. mix (excluding steel reinforcement) as per detailed specification and drawings etc. complete.

Spec. No. : I.S. 2911 – Part I 1964 Clause No. 6.1.5.

6

BD - C : STRUCTURAL STEEL WORK


Completed Labour

M.T. 59610 6680.00

Spec. No. : Bd.C. 2/Page No. 275

M.T. 53900 3275.00


SR.NO. & CODE

NO.


1 BDC

2

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

2

BDC 3

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

7


Completed Labour

SR.NO. & CODE

NO.


M.T. 58900 4055.00


M.T. 61800 9587.00


M.T. 61900 9950.00


3

BDC

6

Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plates, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting,erecting fixing in position, making riveted / bolted / welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

4

BDC

8

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted /bolted/welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

5

BDC

10

Providing and erecting structural steel for sakav with all bracings gusset plates etc. as per detailed design and drawings or as directed including cutting fabricating, hoisting, erecting, fixing in position, making riveted, bolted, welded connection one coat of anticorrosive paint and two coats of oil paint of approved quality and shade complete.

8


Completed Labour

SR.NO. & CODE

NO.


M.T. 74422 6212.00


7 M.T. 65672 7215.00

Cm. 3.2 0.70

6

BDC

11

Providing, fabricating and erecting at site of work the tubular steel structure (shed) of standard size as per standard design and specifications having various spans ranging from 6 mt. to 18 mt. Length in between trusses and in multiples of standard length of bays as specified as per standard specifications inclusive of cost of steel tubular trusses, tubular columns, (3.5 m.height), purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade complete

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.


8 BDC 12A

Providing Gas or Electrical welding for structural steel sections, plates as per detailed drawing, for less than 10 mm thick section


9

BD - E : PLAIN CEMENT CONCRETEDESCRIPTION OF ITEMS UNIT

Completed Labour

Cu.m 2400.00 410.00

Cu.m 2625.00 410.00

SR.NO.

& CODE

NO.


1 BDE

1D

Providing and laying in situ, cement concrete in 1:5:10 of trap/ granite/quartzite/gneiss metal for foundation and bedding / below pile caps including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface curing etc complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)

Spec. No. : Bd.E. 1/Page No. 287/I.S. 456 (2000)

2 BDE

1C

Providing and laying in situ, cement concrete in 1:4:8 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)


10


Completed Labour

SR.NO.

& CODE

NO.


Cu.m. 2910.00 415.00

Cu.m. 3450.00 428.00

3 BDE

1A

Providing and laying in situ, cement concrete M-10/(1:3:6) of trap/granite/quartzite/gneiss metal for foundation and bedding including plywood/steel formwork bailing out water, compacting, finishing uneven and honeycombed surface, curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)


4 BDE

1

Providing and laying in situ, cement concrete M-15 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface, curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)


11


Completed Labour

SR.NO.

& CODE

NO.


a) For C.C. M-15 Cu.m. 3600.00 453.00

b) For C.C. M-20 Cu.m. 3800.00 471.00

Cu.m. 3520.00 498.00

5

BDE

2

Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)


6 BDE 3

Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)


12


Completed Labour

SR.NO.

& CODE

NO.


a) For C.C. M-15 Cu.m. 3600.00 453.00

b) For C.C. M-20 Cu.m. 3800.00 470.00

a) For C.C. M-15 Cu.m. 3700.00 490.00

b) For C.C. M-20 Cu.m. 3900.00 502.00

7 BDE

4

Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)


8

BDE 5

Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, plywood/steel formwork, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)

13


Completed Labour

SR.NO.

& CODE

NO.



13

BD - F : REINFORCED CEMENT CONCRETEDESCRIPTION OF ITEMS UNIT RATES FOR 2011-2012 (In Rs)

Completed

a) For C.C.M-20 Cu.m. 4040.00

b) For C.C.M-25 Cu.m. 4170.00

a) For C.C.M-20 Cu.m. 4100.00

b) For C.C.M-25 Cu.m. 4210.00

SR.NO. & CODE

NO.

1

BDF

1A

Providing and casting in situ cement concrete of required grade of trap / granite /quartzite /gneiss metal for R.C.C. pile caps as per detailed design and drawings including bailing out water, steel centering, plywood/ steel formwork, compacting, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give smooth and even surface and curing etc. complete.(excluding reinforcement , including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

Spec.No.: Bd.F.7/Page No.297/I.S. 456 (2000)

2 BDF 3

Providing and laying in situ cement concrete of required grade of trap / granite/ quartzite / gneiss metal for R.C.C. work in foundations like raft, grillages, strip foundations and footings of R.C.C.columns and steel stanchions including bailing out water, plywood/steel formwork, compaction, curing and roughening the surface if special finish is to be provided, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface etc. complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

14

DESCRIPTION OF ITEMS UNIT RATES FOR 2011-2012 (In Rs)

Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 5225.00

b) For C.C.M-25 Cu.m. 5335.00

spec.No.: Bd.F.5/Page No. 300/I.S. 456(2000)

Sq.m. 115.00

Spec.No.: As directed by Engineer- in-charge.

3

BDF

5

Providing and casting in situ cement concrete of required grade of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed design and drawings or as directed, including steel centering, plywood/steel formwork, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. Including use of plastisizer wherever necessary as directed by Engineer (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

4 BDF

27

Providing and laying 50 mm thick layer in cement mortar 1:8 below plinth beam including floating, watering, curing and leveling and ramming the bed if necessary before laying the layer etc. complete.

15


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 5320.00

b) For C.C.M-25 Cu.m. 5435.00

5 BDF

6A

Providing and casting in situ cement concrete of required grade of trap / granite /quartzite /gneiss metal for R.C.C. beams and lintels as per detailed design and drawings or as directed,including steel centering, plywood/steel formwork steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. Including use of plastisizer wherever necessary as directed by Engineer-In-charge (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)


16


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 5640.00

b) For C.C.M-25 Cu.m. 5760.00


6

BDF

9A

Providing and casting in situ cement concrete of required grade of trap / quartzite / granite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, plywood/steel formwork, steel props, compaction finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc.complete.(Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

17


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 6020.00

b) For C.C.M-25 Cu.m. 6130.00

7

BDF

10A

Providing and casting in situ cement concrete of required grade of trap / quartzite /granite /gneiss metal for R.C.C. canopy as per detailed design and drawings including steel centering, plywood / steel formwork, steel props,compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

Spec.No.: Bd.F.10/ Page No.304/I.S. 456 (2000)

18


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 7120.00

b) For C.C.M-25 Cu.m. 7230.00

8 BDF

16

Providing and casting in situ cement concrete of required grade of trap / granite /gneiss / quartzite metal for R.C.C. fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)


19


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 6420.00

b) For C.C.M-25 Cu.m. 6530.00

9 BDF

7A

Providing and casting in situ cement concrete of required grade of trap / granite /quartzite /gneiss metal for R.C.C.Portals as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)


20


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 6260.00

b) For C.C.M-25 Cu.m. 6370.00

10 BDF

15A

Providing and casting in situ cement concrete of required grade of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)


21


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 5890.00

b) For C.C.M-25 Cu.m. 6010.00


11 BDF

8A

Providing and casting in situ cement concrete of required grade of trap / granite /quartzite /gneiss metal for R.C.C slabs and landings as per detailed design and drawings including steel centering, plywood /steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be and painting to exposed surface and curing etc. complete. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

22


Completed

SR.NO. & CODE

NO.

A a) For C.C.M-20 Cu.m. 6400.00

b) For C.C.M-25 Cu.m. 6520.00

B FOR BEAMS & LINTLES

a) For C.C.M-20 Cu.m. 5830.00

b) For C.C.M-25 Cu.m. 5950.00


12

BDF

Providing and casting in situ cement concrete by using Batching Plant, transit mixer & concret pump of trap/ granite/quartzite/gneiss metal for R.C.C slabs and landings as per detailed design and drawings including steel centering, plywood/steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and painting to exposed surface and curing etc. complete. (Excluding reinforcement & including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed)

23


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 5940.00

b) For C.C.M-25 Cu.m. 6050.00

13

BDF 13A

Providing and casting in situ cement concrete of required grade of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)


24


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 7125.00

b) For C.C.M-25 Cu.m. 7235.00

Spec No.: As directed by Engineer-in-charge.

14 BDF

23, 24

Providing and casting in situ cement concrete of required grade of trap metal for RCC grid beam with slab as per detailed design and drawing with centering, plywood form work, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing (Excluding reinforcement, including cover block) complete. (Wooden planks shuttering will not be allowed)

25


Completed

SR.NO. & CODE

NO.

a) For C.C.M-20 Cu.m. 5570.00

b) For C.C.M-25 Cu.m. 5680.00

16 No. 65.00


15 BDF

14A

Providing and casting in situ cement concrete of required grade of trap / quartzite /granite /gneiss metal for R.C.C.newel posts of staircase as per detailed design and drawings including steel centering, plywood / steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)


Providing and fixing in position in R.C.C. slab during laying rectangular 2 mm thick M.S. Sheet iron box 180 mm x 100 mm and of required depth with holes or notches as required, bottom and top lids of 1.6 mm thick M.S. sheet fixed with 3.5 mm dia round head Screwed together with Fan dia.M.S. bar bent to shape with hooked ends (for fan hooks) as per standard design including painting to exposed portion complete.

26


Completed

SR.NO. & CODE

NO.

a) Plasticizer Cu.m. 156.00

b) Superplasticizer Cu.m. 200.00

a) For C.C.M-20 Cu.m. 7690.00

b) For C.C.M-25 Cu.m. 7800.00

17 BDF 8B

Providing and Adding Melamine based admixture to concrete to have water reducing air entraining plastisizier/superplastisizier property to comply with I.S.9103/1979 at 1% of cement or as per approved manufacturer's specifications.

18 BDF

11A

Providing and casting in situ cement concrete of required grade of trap / granite / gneiss / quartzite metal for R.C.C. pardi 75 mm thick including steel centering, plywood /steel formwork, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening them if special finish is to be provided and curing etc.complete.(Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.( Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) (Wooden centering will not be allowed)


27


Completed

SR.NO. & CODE

NO.

a) Mild steel M.T. 53300.00

M.T. 54680.00

Spec.No.: Bd.F.17/Page No.306

Sq.m. 360.00

Spec.No.: Bd.F.20 / Page No.307

Sq.m. 500.00

Spec.No.: Bd.F.20 / Page No.307

19

BDF

17

Providing and fixing in position reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed.

b) For TMT / HYSD steel bars

20 BDF

19

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick of approved design on both sides fixing in cement mortar 1:3 and curing complete. (with 3 mm diameter mild steel bar reinforcement)

21 BDF

19A

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thick of approved design on both sides fixing in cement mortar 1:3 and curing complete.(with 3 mm diameter mild steel bar reinforcement)

28

BD - F : REINFORCED CEMENT CONCRETERATES FOR 2011-2012 (In Rs)

Labour

550.00

574.00

550.00

574.00

29


Labour

857.00

881.00

35.00

30


Labour

1040.00

1060.00

31


Labour

1100.00

1125.00

32


Labour

1105.00

1130.00

33


Labour

1150.00

1175.00

34


Labour

1065.00

1090.00

35


Labour

1130.00

1155.00

36


Labour

1130.00

1155.00

37


Labour

900.00

900.00

810.00

810.00

38


Labour

1140.00

1165.00

39


Labour

1285.00

1310.00

40


Labour

920.00

945.00

9.00

41


Labour

3.50

3.50

1350.00

1375.00

42


Labour

3995.00

3995.00

74.00

88.00

28

BD - G : BRICK WORKDESCRIPTION OF ITEMS UNIT

Completed Labour

Cu.m. 3185.00 447.00

Spec.No.: Bd.G.1/Page No.313

Cu.m. 3060.00 447.00


Cu.m. 3235.00 483.00


Cu.m. 3110.00 483.00


SR.NO.

& CODE NO.


1 BDG 1

Providing Fly ash lime brick masonry (bricks conforming to I.S.12894 : 1990 of size 19 cm x 9 cm x 9 cm ) in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete.

2 BDG

1

Providing 2nd class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete.

3 BDG

5

Providing Fly ash lime Brick masonry ( Bricks conforming to I.S.12894 : 1990 and of size 19 cm x 9 cm x 9 cm)in cement mortar 1:6 in super structure including striking joints, racking out joints watering and scaffolding complete.

4 BDG

5

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints wateringand scaffolding complete.

29


Completed Labour

SR.NO.

& CODE NO.


Sq.m. 520.00 88.00


Sq.m. 500.00 88.00


Sq.m. 455.00 90.00


5

BDG

7

Providing Fly ash lime Brick masonry (Bricks conforming to I.S. 12894:1990 and of size19 cm x 9 cm x 9 cm ) bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm.diameter/2 hoop iron strips 25 mm x 1.6 mm placed at every third course, properly bent and bounded at ends scaffolding, racking out joints and watering complete

6 BDG 7

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm. diameter/2 hoop iron strips 25 mm x 1.6 mm placed at every third course, properly bent and bounded at ends scaffolding, racking out joints and watering complete.

7 BDG

8

Providing Burnt Brick - on - edge masonry with second class bricks of conventional type in cement mortar 1:3 including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / one strip hoop on 25 mm x 1.6 mm placed at every third course, properly bent and bounded at ends scaffolding, racking out joints and watering complete.

30


Completed Labour

SR.NO.

& CODE NO.


Cu.m. 3070.00 575.00


Cu.m. 3335.00 600.00


Cu.m. 2695.00 465.00


Cu.m. 7185.00 453.00

Spec.No.: Bd.G.20/Page No. 323

8 BDG

10A

Providing Second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:4 including scaffolding, racking joints and watering in pillars of rectangular or square shapes as shown in the drawings.

9 BDG 10B

Providing Second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:4 including scaffolding, racking joints and watering in pillars of curved shape as shown in the drawings.

10 BDG 13

Providing Second class Burnt Brick masonry coping of conventional/ I.S. type bricks in C.M. 1:6 of rectangular chamfered or other shape as per detailed drawings over plinth, parapet wall including racking out joints and watering complete.

11

BDG

Providing Brick work of fire bricks to the shape and size as shown on drawing in fire clay 1:5 proportion including scaffolding, racking out joints pointing and curing complete.

31

BD - H : STONE MASONARYDESCRIPTION OF ITEMS UNIT

Completed Labour

Cu.m. 1190.00 280.00

Spec.No.: Bd.H.1/Page No.329

Cu.m. 1330.00 316.00


Cu.m. 1500.00 483.00


Cu.m. 1440.00 465.00


SR.NO.

& CODE NO.


1

BDH

1

Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailing out water, striking joints on unexposed faces and watering complete.

2 BDH 4

Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in super structure including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

3 BHS

14

Providing coursed rubble masonry 1st sort of trap / granite / quartzite / gneiss stones in C.M. 1:6 in super structure including racking out joints on the inside when plastering is to be done watering and scaffolding etc. complete.

4

BDH

12

Providing coursed rubble masonry 2nd sort of trap / granite / quartzite / gneiss stones in C.M. 1:6 in super structure including racking out joints where plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding etc. complete. ( To be executed with prior permission of S.E.)

32


Completed Labour

SR.NO.

& CODE NO.


Cu.m. 1800.00 593.00

Spec.No. : Bd.H. 40/Page No. 345

5 BDH

40

Providing coursed rubble masonry 1st sort for pillars of trap / granite / quartzite / gneiss stones in C.M.1:6 including pointing with C.M.1:3 scaffolding and watering etc. complete. (To be executed with prior permission of S.E.)

33

BD - I : C.C. HOLLOW BLOCK MASONRYDESCRIPTION OF ITEMS UNIT

Completed Labour

355.00 142.00

Spec.No.: Bd.I.1/Page No.349

715.00 214.00

Spec.No.: Bd.I.1/Page No.349

SR.NO. & CODE

NO.


1

BDI

1

Providing and laying I.S. standard C.C. hollow block 100 mm x 200 mm x 400 mm (100 mm thick) in C.M. 1:6 including racking out joints, when plastering is to be done/striking joints when no plastering is to be done, curing and scaffolding etc. complete.

Sq.m.

2 BDI

2

Providing and laying I.S. standard C.C.hollow block 200 mm x 200 mm x 400 mm (200 mm thick) in C.M. 1:6 for super structure including racking out joints, when plastering is to be done/striking joints when no plastering is to be done curing and scaffolding etc. complete.

Sq.m.

34

BD - J : WATER PROOFINGDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.m. 230.00 45.00

Spec.No.: Bd.J.2/Page No.355

Sq.m. 425.00 80.00


SR.NO. & CODE NO.


1

BDJ

Providing and laying damp proof course 50 mm thick in (1:2:4)/ M-15 cement concrete layer and bitumen felt using cement with water proofing compound etc. complete.

2

BDJ

7

Providing cement based water proofing treatment to terrance (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee on court fee stamp paper of Rs. 100/- including ponding test etc. complete.ponding test etc. complete.

35


Completed Labour

SR.NO. & CODE NO.


Cu.m. 2860.00 910.00


Sq.m. 185.00 60.00


3 BDJ

9

Providing water proofing in W.C. and bath including B.B. Coba in all position consisting of specialised approved waterproofing compound and materials as per manufacturers specifications and covering 10 years guarantee on court fee stamp paper of Rs.100/- including all lead, lift and ponding test etc. complete.

4

BDJ 10

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.100/- including ponding test etc. complete.

36


Completed Labour

SR.NO. & CODE NO.


5 Sq.m. 475.00 87.00


Providing and laying Hyperplas standard or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 kg/sqm) & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 kg/sqm maximum as per surface condition or Hyperplas primer @ 250 gms/sqm as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 10 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate).

37


Completed Labour

SR.NO. & CODE NO.


6 Sq.m. 600.00 125.00

Spec.No.: As directed by Engineer in charge.

7 Sq.m. 215.00 80.00


Providing and laying Hyperplas Aluminum or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 kg/sqm) which is comprise of top with "V" shape embossed 40 micron Aluminum foil to bear thermal expansion and avoiding delamination & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 kg/sqm maximum as per surface condition or Hyperplas primer @ 250 gms/sqm as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 10 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate).

Providing and laying mechanical protective layer over water proofing membrane with cement screed plaster 1:5 after laying chicken mesh over membrane including curing etc. complete 20 mm thick with cost of chicken mesh etc. complete and covering 10 years guarantee on court stamp paper of Rs.100/- including necessary testing specified by Engineer (Prior permission of S.E. is necessary before inclusion of this item in estimate)

38


Completed Labour

SR.NO. & CODE NO.


8 Sq.m. 900.00 140.00

(Note : for slanting length upto. 5.0 m )


Providing Water proofing treatment to newly laid fully cured concrete slab of terraces by applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make (such as Master Seal 550/ brush bond / RoffSupercrete / Webercrete / Monobond /Perma shield / Hypercrate / Master Crete M 81) and Cement in 1 : 2 proportion ( 1 litre polymer : 2 Kg. Cement) or Rohnex water proofing system in two coats(1kg powder,700 ml water and polymer jelly for first coat & 1 kg powder,500 ml water & polymer jelly for second coat )to a neatly cleaned and dust free concrete surface and upto 300 mm. over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover of 40 mm to 75 mm. thick cement concrete of 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound of approved make and polypropylene fibres @ 125 gm per bag of cement within it confirming to IS, in pannels of 3m/4m oras per site condition & filling the joints with polt sulphide sealant(0.08 kg per sq.mt.) after curing including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slurry,polypropylene fibres @ 125 gm per bag of cement within it confirming to IS, in pannels of 3m/4m oras per site condition & filling the joints with polt sulphide sealant(0.08 kg per sq.mt.) after curing including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slurry,incuding curing as directed and ponding the surface as directed etc.complete ; covering 10 years guarantee against leakproofness on court Fee stamp paper of Rs 100/-

39


Completed Labour

SR.NO. & CODE NO.


9 Sq.m. 965.00 170.00

(Note : for slanting length upto 5.0 m)

Providing Water proofing treatment to old terraces by removing existing treatment, sealing of cracks by non shrink crack fill compound applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make (such as Master Seal 550/ brush bond/ RoffSupercrete / Webercrete / Monobond / Perma shield / Hypercrate / Master Crete M 81) and Cement in 1 : 2 proportion (1 litre polymer : 2 Kg Cement )or Rohnex water proofing system in two coats(1kg powder,700 ml water and polymer jelly for first coat & 1 kg powder,500 ml water & polymer jelly for second coat) to a neatly cleaned and dust free concrete surface and upto 300 mm over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover of 40 mm to 75 mm. thick cement concrete of 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound of approved make and polypropylene fibres @ 125 gm per bag of cement within it conforming to IS in pannels of 3m/4m oras per site condition & filling the joints with polt sulphide sealant(0.08 kg per sq.mt.) after curing, including providing holler with drip moulds at the junction and finishing theconcrete surface with neat cement slurry including curing as directed and ponding the surface as directed etc. complete; covering 10 years guarantee against leakproofness on Court Fee Stamp Paper of Rs. 100/-

(Excluding grouting and Removing existing treatment to be paid separately as required)

Spec. No. As directed by Engineer-incharge and as per manufacturers specifications.

40


Completed Labour

SR.NO. & CODE NO.


10 Sq.m. 880.00 135.00


( Note :- For Slanting length more than 5.0 m)

Providing water proofing treatment to newly laid fully cured concrete slab of terraces by applying first coat of polymer modified semi - viscous paste prepared by mixing polymer of approved make (such as Master Seal 550 / brush bond/ RoffSupercrete /Webercrete /Monobond / Perma shield / Hypercrate / Master Crete M 81) and Cement in 1:2 proportion (1 litre polymer : 2 Kg Cement)or Rohnex water proofing system in two coats(1kg powder,700 ml water and polymer jelly for first coat & 1 kg powder,500 ml water & polymer jelly for second coat) to a neatly cleaned and dust free concrete surface and upto 300 mm over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, laying mechanical protective cover to polymer coating treatment with brick bat coba with burnt broken brick bats laid in C.M. 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer, joints of Brick Bats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20mm thick layer of same mortar added with polypropylene fibers at 125 gm per bag of cement including finishing the surface smooth with neat cement slurry admixed with approved water proofing compond, Marking finished surface by false squares of 300 mm x 300 mm, Making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and prapet and curing and covering 10 years Guarantee against leakproofness on court fee stamp paper Rs. 100/- including ponding test etc. complete

41


Completed Labour

SR.NO. & CODE NO.


11 Sq.m. 915.00 160.00

( Note :- For Slanting length more than 5 m)


Providing water proofing treatment of Old Terraces by removing existing treatment. Sealing of cracks by non shrink cracks fill compound by applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make (such as Master Seal 550/ brush bond / RoffSupercrete/ Webercrete/ Monobond / Perma shield / Hypercrate / Master Crete M 81) and Cement in 1:2 proportion ( 1 litre polymer : 2 Kg Cement)or Rohnex water proofing system in two coats(1kg powder,700 ml water and polymer jelly for first coat & 1 kg powder,500 ml water & polymer jelly for second coat) to a neatly cleaned and dust free concrete surface and upto 300 mm over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, laying mechanical protective cover to polymer coating treatment with brick bat coba with burnt broken brick bats laid in C.M. 1:5 admixed with approved water proofing compound, filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm thick layers of same mortar added with polypropylene fibres at 125 gm per bag of cement including finishing the surface smooth with cement slurry admixed with approved water proofing compound, Marking finished surface by flase squares of 300 mm x 300 mm making thejunctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on court fee stamp paper of Rs. 100/- including ponding test etc. complete

(Excluding grouting and Removing existing treatment to be paid separately as required)

42


Completed Labour

SR.NO. & CODE NO.


12 Sq.m. 245.00 13.00


Providing water proofing treatment to Bath & W.C. sunk by applying first coat of polymer modified semi-viscous paste prepared by applying grouting with cement slurry admixed with non shrink grout additives as per manufacturers specifications, mixing polymer of approved make (such as Master Seal 550/ brushbond/ RoffSupercrete/ Webercrete/ Monobond / Perma shield / Hypercrate / Master Crete M 81) and cement in 1:2 proportion (1 litre polymer : 2 Kg Cement)or Rohnex water proofing system in two coats(1kg powder,700 ml water and polymer jelly for first coat & 1 kg powder,500 ml water & polymer jelly for second coat to a netly cleaned and dust free concrete surface prepared by removing looseand deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it followed by protective mechanical cover of 15 to 20 mm thick polymer modifiedplaster to coated surface of sunk @ 2 litre per bag of cement and filling joints with non shrink compound and covering 10 years guarantee against leakproofness on court fee stamp paper of Rs. 100/-

(excluding Brick Bat Coba and plaster below flooring )

43

BD - J-1 : REPAIRS & REHABILITATIONDESCRIPTION OF ITEMS UNIT

Completed Labour

1 Sq.m. 575.00 90.00


2 Kg. 250.00 60.00


SR.NO. & CODE


Providing and applying water proofing treatment to vertical surface of brick and R.C.C. wall, elevated and overhead R.C.C./ brick water tanks and sumpwell etc. in all directions by using standard acrylic copolymer coating of Roff Hyguard, Monopol 456, Dr. Fixit Pidilite 2K or equivalent in two coats including cleaning the surface by wire brush, washing and drying including covering gurantee of 10 years on court stamp paper of Rs. 100/-, and as directed by Engineer in charge etc. complete.(Prior permission of S.E.in writing is necessary before inclusion of item in estimate).

Providing Grouting by specially prepared grout of Weber crete / Roff Supercrete / Polyalk WP / Monobond /Perma shield / Hypercrate or equivalent with cement in proportion 1 : 3.5 (1 part chemical & 3.5 part cement by weight) along with 50 ml super plasticizer Roff Plast 320 / sun polycrete NCT/perma plast/ supercon 100 or non shrinking non cracking antiwash high strength polymer cement grout PC grout available in bags or equivalent with proper water for injectable consistency and applying it in the body of structure like slab, beam, column, pillars , deckslab, retaining wall, basement, underground & elevated water storage reservoir concrete & brick wall, crack portion of structure etc. by injecting method, to achieve its original strength including drilling of suitable diameter drills holes at 2 to 4 Nos. per sqm using caps & nozzle grouting machinery necessary, scaffolding, finishing & covering guarantee of 10 years on court stamp paper of Rs. 100/- & necessary testing etc. complete. (Prior permission of S.E.in writing is necessary before inclusion of item in estimate).

44


Completed Labour

3 Sq.m. 830.00 75.00


SR.NO. & CODE


Providing & applying polymer modified plaster of 20mm thick in C.M. 1:3 and adding polymer such as Webercrete, Roff Supercrete , Monobond ,Perma shield , Hypercrate, , Dr. Fixit Powercrete at 6.00 litres in 1 bag of Cement and polyprolen fibers @ 125 gm per bag of cement to damaged structural concrete members by removing chipping out loose concrete,cleaning surface by wire etc including curing with covering guarantee on court stamp paper of Rs. 100 /- guarantee. (Prior permission of S.E.in writing is necessary before inclusion of item in estimate).

45

BD - K : EXPANSION JOINTSDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.m. 1480.00 117.00

Spec.No.: Bd.K.1/Page No.359

Sq.m. 2006.00 146.00


Sq.m. 2445.00 220.00


Sq.m. 3690.00 373.00

SR.NO.

& CODE NO.


1

BDK 1

A

Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25mm thick including fixing T.W. battens both faces and finishing etc. complete as directed.

2 BDK

1 B

Providing expansion joints in R.C.C. framed structure (exterior columns) with plain premoulded filler 25 mm thick and 3 mm thick aluminium plate, hold fast, fixing T.W. battens on internal face, finishing etc. complete as directed.

3

BDK

1C

Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed.

4

BDK

1D

Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bituminous poured filler, fixing lead, flushing on upper side and T.W. battens and inner face finishing etc. complete as directed.

46


Completed Labour

SR.NO.

& CODE NO.



46

BD - L : PLASTERING AND POINTINGDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.m 84.00 23.00

Spec.No.: Bd.L.1/Page No.367

Sq.m 87.00 25.00


Sq.m 105.00 47.00


SR.NO.

& CODE NO.


1 BDL

1

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

2

BDL

1A

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

3

BDL

2

Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete or brick surface in all positions including scaffolding and curing etc. complete.

47


Completed Labour

SR.NO.

& CODE NO.


Sq.m 108.00 46.00


Sq.m 117.00 44.00


Sq.m 169.00 56.00


Sq.m 174.00 57.00


4

BDL 2 A


5

BDL 2B


6 BDL

3

Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:3 without neeru finish to stone masonry surfaces in all positions including scaffolding and curing etc. complete.

7 BDL

4

Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete, brick surfaces in all positions including scaffolding and curing etc. complete.

48


Completed Labour

SR.NO.

& CODE NO.


Sq.m 182.00 56.00


Sq.m 190.00 58.00


Sq.m 217.00 60.00

Spec.No.: Bd.L.5/Page No. 368

8

BDL 4A

Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete, brick surfaces in all positions including scaffolding and curing etc. complete.

9

BDL

4B

Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete, brick surfaces in all positions including scaffolding and curing etc. complete. .

10 BDL 5

Providing internal cement plaster 25 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete, brick, stone surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B. Masonry and concrete members complete.

49


Completed Labour

SR.NO.

& CODE NO.


Sq.m. 260.00 77.00

Spec.No.: Bd.L.7/Page NO.369

12 Sq.m. 266.00 78.00

Spec.No. Bd.L.8/page No. 370

Sq.m. 277.00 81.00


11 BDL 7

Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. complete.

Providing rough cast cement plaster for external portion in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick in proportion 1:3 including scaffolding , making grooves and fourteen days curing complete.

13 BDL

9

Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete / brick / stone masonry surfaces in all positions with base coat 12 to 15 mm thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1 : 1.5 : 3 using coloured pigment including scaffolding, making grooves and fourteen days curing etc. complete.

50


Completed Labour

SR.NO.

& CODE NO.


Sq.m. 15.00 7.00


Sq.m. 20.00 9.00


Sq.m. 385.00 131.00


14

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.

15

Providing neeru finish / neat cement finish to plastered surfaces for ceiling.

16

BDL

11

Providing exterior stonecrete facing of approved colour and dressing with base coat of 12 to 15mm thick in cement mortar 1:3 using water proofing compound at 1kg/bag to brick or stone masonry or concrete surfaces in all positions including final coat of stonecrete facing of required thickness but not less than 12mm thick in proportion 1:3 using gray cement and colour pigment scaffolding and fourteen days curing complete. (Prior written permission of S.E. should be taken before inclusion of item in estimate.)

51


Completed Labour

SR.NO.

& CODE NO.


17

By trawel Sq.m. 440.00 163.00

By Roller spring Sq.m. 405.00 163.00

18 Sq.m. 575.00 240.00

Providing and applying granular textured finish 1.5mm thick to old / new surfaces in decorative finish in approved colour and shade as directed by engineer-in-charge including scrapping preparing the surface scaffolding etc. complete.


Providing and applying synthetic plaster 2.00 to 2.5 mm thick to new cement plaster surface in proper line level and finishing in various shades as directed by engineer incharge including cleaning, scrapping of surface etc. complete. The item includes 2 coats of synthetic acrylilc coating scratch plaster and 2 coats of textured paint.


52


Completed Labour

SR.NO.

& CODE NO.


19 Sqm 829.00 322.00

20 Sqm 725.00 195.00

Providing and applying external Stonecrete Plaster 8 to 10 mm thick in one coat of approved colour and shade, over base coat of 8 to 12 mm thick rough cement plaster in C.M. 1:4, in ratio 1 : 1 : 2.5 [ 1 part Birla White Cement, 1 part Dolomite / Calcite / Marble powder and 2.5 part quartz sand /Marble chips (Zero No.)] using water proofing compound. (Impermo – Snowcem make or equivalent) @ 2% by weight of white cement and adding synthetic inorganic colour pigments as per desired shade, to brick or concrete surfaces in all positions, making grooves, chiseling to give Ashlar Stone Finish, Washing and cleaning the surface, applying water repellent (Perma make or equivalent)including scaffolding, curing etc. complete.


Providing and applying stone grit wash plaster on exterior walls in two layers, under layer 12 mm thick cement plaster in c.m. 1:4 in gray cement, furrowing the under layer with scratching tools, applying white cement slurry on the under layer @2kg. / per sqm. top layer 15 mm cement plaster in proportion 1: ½ : 2 (Birla white cement : ½ coarse sand : 2 stone chipping 10mm nominal size) in panels with grooves all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chipping, including, scaffolding, curing etc. complete.


53


Completed Labour

SR.NO.

& CODE NO.


21 Sq.m. 166.00 42.00

Sq.m. 99.00 28.00


23 Rmt. 6.20 5.80

24

50 mm wide Rmt. 23.00 14.00

100 mm wide Rmt. 29.00 18.00

150 mm wide Rmt. 35.00 22.00

Providing and applying spray plaster in C.M. 1:3 made with finely graded sand in two coat, each of 2 mm thick using putty- knife or trowel to newly plastered or fairly even surface after minimum 30 days gap in all position including finishing the surface using `0' number sand paper or fine emery paper and bringing to required level and surface by moving paper in round circle rubbing dust and cleaning the surface with dry cloth and scaffolding including all material and labour etc. complete.


22 BDL

1

Providing cement plaster 6 mm thick to ceiling in single coat in cement mortar 1:3 with out neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete.

Spec.No. : As directed by Engineer- in-charge

Providing patta on concrete/ plastered surface 12 mm to 15 mm thick in C.M.1:3 in line, level, including drip mould if necessary, scaffolding, finishing, curing etc. complete.

Spec.No. : As directed by Engineer- in-charge.

54


Completed Labour

SR.NO.

& CODE NO.


25 Rmt. 47.00 10.00

26 Rmt 11.00 7.00

27 Rmt. 50.00

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or/B.B.masonry and or tying by binding wire etc. complete.


Providing cement paste 2.50 cm on either side of edges of plaster for doors & windows including scaffolding ,finishing, curing etc. complete.


Providing and fixing glass fiber mesh Alkali resistance, 50 gsm, 10 x 10 about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including applying bond coat of acrylic polymer & cement by brush in 1:1 proportation, fixing mesh over it, tying by nails & binding wire etc. complete.


57

BD - M : PAVING, FLOORING AND DADODESCRIPTION OF ITEMS UNIT

Completed Labour

256 57

Spec.No.: Bd.M.1/Page No.379496 92

Spec.No.: Bd.M.3/Page No.380

515 105


550 108


SR.NO. & CODE

NO.


1

BDM

1

Providing and laying rough Shahabad Stone Flooring 20mm to 25 mm thick and of required width in plain/diamond pattern on a bed of C.M. 1:6 including cement float, striking, joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.

Sq.m.

2

BDM 3

Providing and laying polished Shahabad Stone Flooring 20 mm to 25 mm thick and of required width in plain/diamond pattern on a bed of C.M. 1:6 including cement float, filling joints with neat cement slurry, curing polishing and cleaning complete

Sq.m.

3 BDM 4

Providing and laying polished Shahabad Stone Flooring 20 mm to 25 mm thick and of required width in plain/diamond pattern with black polished kaddappa slab for border or any other design on a bed of C.M. 1:6 including cement float, filling joints with neat cement slurry, curing polishing and cleaning complete

Sq.m.

4 BDM

5

Providing and fixing in required position skirting or dado of polished Shahabad stone slabs 20 mm to 25 mm thick and required width on after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Sq.m.

58


Completed Labour

SR.NO. & CODE

NO.


5 705 92


755 102


780 109


190 74

Spec.No. : Bd. M. 7/Page No. 383

Providing and laying hand cut polished kota stone Flooring 20 mm to 25 mm thick plain pattern on a bed of C.M. 1:6 including cement float, filling joints with neat cement slurry, curing rubbing, polishing and cleaning complete

Sq.m.

6

BDM 3B

Providing and laying hand cut polished kota stone Flooring 20 mm to 25 mm thick diamond pattern on a bed of C.M. 1:6 including cement float, filling joints with neat cement slurry, curing rubbing, polishing and cleaning complete

Sq.m.

7 BDM 5B

Providing and fixing in required position skirting or dado of polished Kota stone slabs 20 mm to 25 mm thick and required width after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Sq.m.

8 BDM

7

Providing and laying cement concrete flooring 40 mm thick with 1:2:4 cement concrete laid to proper level and slope in alternate bays, including compacting, PVC/ Glass/Aluminum strips at joints, marking lines to give appearance of tiles of 30 cm x 30 cm or other size laid diagonally/square etc. finishing smooth(with extra cement) in any colour as directed and curing complete.

Sq.m.

59


Completed Labour

SR.NO. & CODE

NO.


235 74

a) With Iron filings and flakes in flooring 245 81


300 67

Spec.No.:Bd.M.8/Page No.383

330 77


9 BDM

6A

Providing and laying cement concrete flooring 50 mm thick with 1:2:4 cement concrete laid to proper level and slope in alternate bays, including compacting, PVC/ Glass/Aluminum strips at joints, marking lines to give appearance of tiles of 30 cm x 30 cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and curing complete.

Sq.m.

Sq.m.

10 BDM

8

Providing and laying flooring of plain cement tiles of size 25cm x 25 cm and 20 mm thick on bed of 1:6 cement mortar including neat cement float, joints with neat cement slurry, curing, polishing and cleaning without border/with border /with pattern cement tiles of gray colour.

Sq.m.

11 BDM

9

Providing and fixing plain cement tiles of size 25 cm x 25 cm and 20 mm thick for dado and skirting in required position after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive including filling joints with neat cement slurry, curing, rubbing, polishing and cleaning complete.

Sq.m.

60


Completed Labour

SR.NO. & CODE

NO.


310 67


340 77


660 98


12

BDM 10

Providing and laying plain coloured cement tiles of size 25 cm x 25 cm and 20mm thick approved shade of blue/green/red colour/ other than these colours for flooring in required position on a bed of C.M. 1:6 including neat cement float, filling joints with neat cement slurry mixed with approved shade of pigment to match the colour of tiles, curing and machine polishing complete without border/with border and/or a pattern of coloured tiles.

Sq.m.

13 BDM 11

Providing and fixing plain coloured cement tiles of approved shade of blue/green/red coloured/other than these colours for dado and skirting in required position on plaster after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive including filling joints with neat cement slurry mixed with approved shade of pigment to match the colour of tiles, curing, rubbing and polishing complete.

Sq.m.

14 BDM 12

Providing and laying white glazed tiles of all sizes and minimum thickness of 5mm for flooring in required position laid on bed of C.M.1:6 including neat cement float, filling joints with neat white cement slurry, curing and cleaning complete. (including all specials required, like round edge tiles, corner cups)

Sq.m.

61


Completed Labour

SR.NO. & CODE

NO.


695 119


685 98


720 119


15 BDM

13

Providing and fixing white glazed tiles of all sizes and minimum thickness of 5mm for dado and skirting in required positions after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive (including all specials required like round corner tiles, angles, cups etc.) filling joints with white cement slurry, curing and cleaning complete.

Sq.m.

16 BDM 12A

Providing and laying coloured glazed tiles of all sizes and minimum thickness of 5mm for flooring in required position laid on bed of C.M.1:6 including neat cement float (including all specials required like round edge tiles, corner cups etc.) filling joints with neat white cement slurry curing and cleaning complete.

Sq.m.

17 BDM

13A

Providing and fixing coloured glazed tiles of all sizes and minimum thickness of 5mm for dado and skirting in required positions after making the wall portion to required level with C.M.1:4 and fixing tiles with ready made adhesive excluding all specials required like round corner tiles, angles, cups etc. filling joints with white cement slurry, cleaning, curing complete.

Sq.m.

62


Completed Labour

SR.NO. & CODE

NO.


855 208


890 236


375 98


18

BDM

44

Providing and Laying ceramic tiles of approved quality , required size and 5.5.mm thickness for flooring in required position laid on bed of C.M.1:4 including cement float, filling joint with white / colour cement slurry, cleaning, curing, complete.

Sq.m.

19 BDM

45A

Providing and fixing ceramic tiles of approved quality , required size and 5.5.mm thickness for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of C.M. 1:4 including joint filling with white/colour cement slurry cleaning curing complete.

Sq.m.

20 BDM

14

Providing and laying gray cement base marble mosaic tiles 25cm x 25 cm and 20 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6 mm for flooring in required position set on bed of C.M. 1:6 including neat cement float, filling joints with neat coloured cement slurry, curing polishing and rubbing complete.

Sq.m.

63


Completed Labour

SR.NO. & CODE

NO.


410 113


440 98


475 113


21

BDM 25

Providing and fixing Gray cement base marble mosaic tiles 25 cm x 25 cm and 20 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6mm/12mm/20mm for dado and skirting in required position after making the wall portion to required level with C.M.1:4 and fixing tiles/with ready made adhesive including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and rubbing complete

Sq.m.

22 BDM

14A

Providing and laying white cement base marble mosaic tiles 25 cm x 25 cm x 20 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6mm for flooring in required position set on bed of C.M. 1:6 including neat cement float, filling joints with neat coloured cement slurry, curing polishing and rubbing complete.

Sq.m.

23 BDM

15A

Providing and fixing white cement base marble mosaic tiles 25 cm x 25cm and 20 mm thick of approved colour and pattern with white and coloured marble chips upto a maximum size of 6mm/12mm/20mm for dado and skirting in required position after making the wall portion to required level with C.M. 1:4 and fixing tiles with ready made adhesive including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and rubbing complete.

Sq.m.

64


Completed Labour

SR.NO. & CODE

NO.


24 Sq.m. 320 117


2350 268


1795 268

2385 283

Spec.No.: Bd.M.17/Page No.387 1830 283

Providing and laying in required position flooring of TUKDA MOSAIC (Broken Mosaic) Tiles of approved colour and pattern on a bed of C.M.1:4 with water proofing compound in specified proportion including neat ordinary cement/ colour cement float giving proper slope, compacting/setting in position curing, polishing and finishing etc. complete

25

BDM

16

a) Providing and laying white makrana marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for flooring in required pattern on bed of C.M. 1:6 including neat white/ coloured slurry, curing polishing, cleaning complete.

Sq.m.

b) Marble other than white makrana marble Sq.m.

26 BDM

17

a) Providing and fixing white makrana marble slabs or equivalent of size 60 cm x 45 cm and 15 to 18 mm thick of approved quality vein and colour with machine polished surface for dado and skirting after making the required portion in level, in cement plaster 1:4 and fixing the slabs with ready made adhesive including filling joints with neat approved coloured slurry, curing polishing, cleaning complete.

Sq.m.


65


Completed Labour

SR.NO. & CODE

NO.


27 Sq.m. 2970 268

b) for dado and skirting 3005 283

Spec.No.: As directed by Engineer- in-charge

28 Sq.m.

A ) One Side Polished

a) Kadappa Partition 25 mm to 30 mm thick 575 168

1900 168

c) Granite Partition 15 to 18 mm thick 2860 180

B ) Both Side Polished

a) Kadappa Partition 25 mm to 30 mm thick 720 251

2045 247

c) Granite Partition 15 to 18 mm thick 3005 259


a) Providing and fixing granite of best quality for flooring of approved colour and feature 15 to 18 mm thick in required position with ready made adhesive mortar of approved quality including joint filling with coloured cement slurry cleaning, curing etc. complete . (Prior permission of S.E. is to be obtained before inclusion of this item in the estimate)

Providing and fixing in position Partition of polished Kaddappa / Marble / Granite stone of required thickness ,including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete.

b) Marble(other than makrana) Partition 15 to 18 mm thick

b) Marble(other than makrana) Partition 15 to 18 mm thick

66


Completed Labour

SR.NO. & CODE

NO.


450 145


Sq.m. 510 174


31 425 106


595 133


29

BDM

18

Providing and laying in situ marble mosaic of 10 mm thickness with white and coloured marble chips upto maximum size of 6mm in white/ coloured cement in suitable panels for flooring including 30mm thick under layer of 1:2:4 cement concrete/Indian patent stone, PVC, glass, aluminum strips to form panels, levelling, compacting, curing, machine polishing and cleaning complete.

Sq.m.

30 BDM

19

Providing and laying in situ marble mosaic 6 mm thick dado and skirting in white cement and using white and coloured marble chips in suitable panels on cement plaster 1:3, 20mm. thick including aluminum strips for forming panel, rounding of corners and junctions with flooring and walls, curing, polishing and cleaning complete.

Providing and fixing P.V.C./ Synthetic tiles with ready made adhesive including cleaning surface before laying, etc. complete.

Sq.m.

32 BDM 22

Providing and laying polished Shahabad Stone slabs 20mm to 25mm thick for treads and risers of steps and staircases, with rounded nosing and groove at edge for the treads, on a bed of C.M. 1:4 including cement float filling joints with neat cement slurry, curing, polishing and cleaning complete.

Sq.m.

67


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 805 159


365 98


380 98

Spec.No.: Bd.M.24/Page No. 390

33

BDM 22B

Providing and laying polished Kota Stone slabs 20mm to 25 mm thick for treads and risers of steps and staircases, with rounded nosing and groove at edge for the treads, on a bed of C.M. 1:4 including cement float filling joints with neat cement slurry, curing, polishing and cleaning complete.

34 BDM 23

Providing and laying plain cement tiles for treads and risers of steps and staircases with nosing of treads moulded as per drawings or as directed on a bed of C.M. 1:4 including cement float filling joints with neat cement slurry, curing, polishing and cleaning complete.

Sq.m.

35

BDM

24

Providing and laying plain coloured cement tiles of approved shade of blue/green/red colour or other than these colour for treads and risers of steps and staircases with nosing of the treads molded as per drawings or as directed, on a bed of C.M. 1:4 including cement float, filling joints with neat coloured cement slurry to match the colour of the tiles, curing, polishing and cleaning complete.

Sq.m.

68


Completed Labour

SR.NO. & CODE

NO.


a)Grey cement Base 405 104

b)White cement Base 460 104


2560 332

1925 332


560 99


36 BDM 25

Providing and laying marble mosaic tiles of approved colour and pattern with white and coloured marble chips upto the maximum size of 6mm/12mm/20mm for treads and risers of steps and staircases, with nosing for the treads molded as per drawings or as directed, on a bed of C.M. 1:4 including neat cement float, filling joints with neat coloured cement slurry to match the colour of tile, curing, polishing and cleaning complete.

Sq.m.

Sq.m.

37 BDM

26

a) Providing and laying white makrana marble slabs or equivalent 15 to 18 mm thick of approved quality, vein and colour with machine polished surface, for steps of stair cases on a bed of C.M. 1:4 including rounded nosing for the treads neat cement float, filling joints with coloured cement slurry to match the colour of slabs, curing, polishing, cleaning complete.

Sq.m.


38 BDM

29

Providing sills of polished Shahabad stone 25mm to 30mm thick, on a bed of C.M. 1:4 including cement float, filling joints with slurry, curing and machine polishing, rounding edges cleaning complete

Sq.m.

69


Completed Labour

SR.NO. & CODE

NO.


725 105


550 103


Sq.M. 2440 302

Spec.No.: Bd.M.31/Page No.392 1850 292

c) Granite sills / jambs / revels 3050 302

Sq.M. 350 97

39 BDM

29B

Providing sills of polished Kota stone 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with slurry, curing, polishing, rounding edges, cleaning complete.

Sq.m.

40 BDM

29C

Providing sills of polished Kaddappa stone 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with slurry, curing, polishing, rounding edges, cleaning complete.

Sq.m.

41 BDM 31

a) Providing sills / jambs / revels of white makrana marble slabs or equivalent 15 to 18 mm thick of approved quality vein and colour with machine polished surface on a bed of Cement Mortar 1:4 including neat cement float filling joints with neat cement slurry to match the colour of the slabs curing, polishing and rounding edges, cleaning etc. complete.


Sq.m.

42(A) BDM 33A

Providing and laying 25 mm. thick precast polished chequered cement tiles for treads of size 20 cm. x 32 cm. and 20 mm. Thick plain cement tiles for risers of steps and staircase with nosing of treads moulded as per drawing or as directed on a bed of 1:4 cement mortar in required positions including cement float filling joints with neat cement slurry, curing, polishing and cleaning complete.

70


Completed Labour

SR.NO. & CODE

NO.


Spec. No. Bd.M.33(a) Page No. 392

Sq.M. 330 98

Spec. No. Bd.M.33(a) Page No. 392

42 (B) BDM

33A

Providing and laying 25mm thick precast polished chequered cement tiles 25 cm x 25 cm x 20 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6mm for flooring in required position set on bed of C.M. 1:6 including neat cement float, filling joints with neat coloured cement slurry, curing polishing and rubbing complete.

71


Completed Labour

SR.NO. & CODE

NO.


320 97

Spec. No. : Bd.M.33(b) Page No. 392

340 98

Spec. No. : Bd.M.33(b) Page No. 392

45 14

Spec.No.: Bd.M.36(B)/Page No.394

32 10


43(A) BDM

33B

Providing and laying 25 mm. Thick precast polished chequered coloured cement tiles and pattern for treads of size 20 cm. x 32cm. And 20 mm. Thick plain cement tiles for risers of steps and staircase with nosing of treads moulded as per drawing or as directed on a bed of 1:4 cement mortar in required positions including neat cement float filling joints with neat cement slurry mixed with approved shades of pigment to match the colour of the tiles, curing, polishing and cleaning complete.

Sq.m.

43(B) BDM 33B

Providing and laying 25mm thick precast polished chequered coloured cement tiles 25 cm x 25 cm x 20 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6mm for flooring in required position set on bed of C.M. 1:6 including neat cement float, filling joints with neat coloured cement slurry, curing polishing and rubbing complete.

Sq.m.

44 BDM

Providing 15 cm thick murum flooring including watering, ramming, finishing smooth and applying two coats of cow dung wash complete.

Sq.m.

45 BDM

Renewing the existing murum flooring with adding 70 mm thick murum, washing with cow dung wash etc. complete.

Sq.m.

72


Completed Labour

SR.NO. & CODE

NO.


Sq.m 575 99


380 97

a) ------ do ------- Fly Ash Brick paving 350 97

Spec.No.: Bd.M.40/Page No. 396

48 580 81


46 BDM 43

Providing and fixing black Kadappa stone steps, 25 mm thick machine polished, cutting rounding corners, groove on edges laying in position jointing with neat cement slurry on cement mortar bedding in cement mortar 1:4 proportion curing etc. complete.

47 BDM

49

Providing BRICK-ON-EDGE paving with IInd class I.S./conventional type burnt bricks in cement mortar 1:4 including sand cushion, flat brick bedding, pointing with cement mortar 1:3 and curing complete.

Sq.m.

Providing and fixing 60mm thick factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks in M-40 grade of approved size and shape as specified 50 mm in gray cement and top surface 10 mm in white cement with coloured pigment including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Sq.m.

73


Completed Labour

SR.NO. & CODE

NO.


49 sqm. 130 79

50


a) 600 mm x 600 mm. size sqm. 1190 249

b) 900 mm x900 mm. size sqm. 1360 249

Providing Mirror Polish to New/old Marble /Kota / granite stone flooring /dado by polishing machine using superior polishing stone of 0 to 6 no.of Suri Company and equivalent and applying superior quality of polishing material including necessary labour and cleaning the srface etc. complete.

Note:-item to be executed with the prior permission from Superintending Engineer.

Providing and Laying vetrified tiles of approved make and quality of required size and thickness for flooring in required position laid on bed of C.M.1:4 including cement float, filling joint with white / colour cement slurry, cleaning, curing, complete.

74


Completed Labour

SR.NO. & CODE

NO.


51


a) 600 mm x 600 mm. size sqm. 1233 240

b) 900 mm x900 mm. size sqm. 1403 270

52

a) Kadappa shelves 25 mm to 30 mm thick sqm. 575 170

sqm. 1900 170

c) Granite shelves 15 to 18 mm thick sqm. 2860 170


53

a) Half moulding Rmt. 60 37

b) Fullmoulding Rmt. 90 56


Providing and fixing vetrified tiles of approved make and quality of required size for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of C.M. 1:4 including joint filling with white/colour cement slurry cleaning curing complete.

Providing and fixing in position Shelves of polished Kaddappa / Marble / Granite stone of required thickness ,including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete.

b) Marble other than white marble shelves 15 to 18 mm thick

Providing moulding to granite / Marble / Kota stone including polishing, rounding edges, as required cleaning etc. complete.

74

BD - N : WOOD FINISHDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.M. 13.00 6.00

Spec. No.:Bd.N.1.1/Page No.399

Sq.M. 19.00 8.00

Spec. No.: Bd.N.1.1/Page No 399

Sq.M. 17.00 9.00

Spec. No.: Bd.N.1.2/Page No.399

Sq.M. 38.00 15.00


Sq.M. 16.00 8.00


Sq.M. 11.00 4.50

Spec.No.: Bd.N.1.6/Page No.400

SR.NO. & CODE

NO.


1 BDN

Providing and applying boiled linseed oil in one coat including knotting, preparing the surface, scaffolding etc. complete as directed.

2 BDN

Providing and applying boiled linseed oil in two coats to the new wood work including knotting, preparing the surface, scaffolding etc. complete as directed.

3 BDN

Providing and applying Wax polishing to the old wood work including knotting, preparing the surface, scaffolding etc. complete as directed.

4 BDN

13A

Providing and applying french polishing for required finish on wood previously polished surface including knotting, preparing the surface, scaffolding etc. complete as directed.

5 BDN

14A

Providing and applying varnish in one coat on previously varnished wood work including knotting, preparing the surface,scrapping, scaffolding etc. complete.

6 BDN

16A

Providing and applying coal tar in one coat on previously painted wood including preparing the surface, scaffolding etc. complete.

75


Completed Labour

SR.NO. & CODE

NO.


Sq.M. 18.00 7.00

Spec.No.: Bd.N.1.6/Page No.400

Sq.M. 42.00 14.00

Sq.M. 17.00 10.50

10

a)On New Surface Sq.M. 203.00 74.00

b)For previously polished Surface Sq.M. 91.00 29.00

7 BDN

Providing and applying coal tar in two coats on new wood work including preparing the surface, scaffolding etc. complete.

8

BDR 20

Providing and applying two coats of bitumen to roof on new dungree cloth, one coat on each side etc. complete as directed.


9 BDR

21

Providing and applying one coats of bitumen to roof (without cloth) including scaffolding etc. complete as directed.


Providing and applying Melamine polish of required glossy / mat finish to wood work by spray machine including knotting and preparing the surface by scrapping, applying, polishing, scaffolding, if required etc. complete.


76

BD - O : OIL PAINTINGDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.m. 42.00 14.00

Spec.No.: Bd.O.1/Page No.403

Sq.m. 51.00 16.00


Sq.m. 23.00 8.00


Sq.m. 34.00 14.00

SR.NO. & CODE

NO.


1

BDO

1

Providing and applying two coats of lead/zinc base oil paint of approved colour and shade to new wood work and fibre boards including preparing the surface, knotting, scaffolding if necessary, including primer coat complete. (Sample and brand is to be got approved from Ex.Engineer before use)

2 BDO

1A

Providing and applying three coats of lead/zinc base oil paint of approved colour and shade to new wood work and fibre boards including preparing the surface, knotting, scaffolding if necessary including primer coat complete. (Sample and brand is to be got approved from Ex.Engineer before use)

3 BDO

2

Providing and applying one coat of lead/zinc base oil paint of approved colour and shade to old wood work previously painted and fibre boards including preparing the surface, if necessary scaffolding, including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

4

BDO

2A

Providing and applying two coats of lead/zinc base oil paint of approved colour and shade to old wood work and fibre boards previously painted including preparing the surface, if necessary scaffolding, including primer coat complete. (Sample and brand is to be got approved from Ex.Engineer before use)

77


Completed Labour

SR.NO. & CODE

NO.



Sq.m. 42.00 19.00


Sq.m. 40.00 14.00


Sq.m. 48.00 19.00


5

BDO

2B

Providing and applying three coats of lead / zinc base of oil paint of approved colour and shade on old wood work previously painted and fibre boards, including preparing the surface, if necessary scaffolding including primer coat etc. complete.(Sample and brand is to be got approved from Ex. Engineer before use)

6 BDO 3

Providing and applying two coats of lead / zinc base oilpaint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface including primer coat etc. complete. (Sample and brand is to be got approved from Ex. Engineer before use)

7 BDO

3A

Providing and applying three coats of lead/zinc base oil paint of approved colour to new structural steel work and iron work in buildings, including scaffolding, if necessary cleaning and preparing the surface excluding primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

78


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 47.00 8.00


Sq.m. 60.00 14.00


Sq.m. 69.00 18.00


Sq.m. 53.00 14.00

8 BDO

4

Providing and applying one coat of aluminum paint of approved make to new structural steel work in building and workshop including, scaffolding if necessary, cleaning and preparing surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

9

BDO

4A

Providing and applying two coats of aluminum paint of approved make to new structural steel work in building and workshops including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

10

BDO 4B

Providing and applying three coats of aluminum paint of approved make to new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

11

BDO

5

Providing and applying two coats of synthetic enamel paint of approved colour to new structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

79


Completed Labour

SR.NO. & CODE

NO.



80


Completed Labour

SR.NO. & CODE

NO.


12 Sq.m. 47.00 15.00


Sq.m. 66.00 18.00


Sq.m. 36.00 9.50


Providing and applying two coats of synthetic enamel paint of approved colour to old structural steel work and wood work in buildings including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

13

BDO 5A

Providing and applying three coats of synthetic enamel paint of approved colour to new and old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (including primer coat) complete. (Sample and brand is to be got approved from Ex. Engineer before use)

14

BDO

6

Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

81


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 50.00 14.00


15 BDO

6A

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

82


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 69.00 16.00

Spec.No.: Bd. O. 6/Page No. 406

Sq.m. 34.00 8.00


Sq.m. 52.00 10.50


Sq.m. 48.00 14.00


16 BDO

6B

Providing and applying three coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building scaffolding, if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

17 BDO

7

Providing and applying one coat of flat oil paint of approved colour and shade to internal/External plastered surfaces including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

18 BDO 7A

Providing and applying two coats of flat oil paint of approved colour and shade to internal / External plastered new surfaces including scaffolding if necessary, cleaning and preparing the surface including primer coat complete.(Sample and brand is to be got approved from Ex.Engineer before use)

19 BDO 7A

Providing and applying two coats of flat oil paint of approved colour and shade to internal/External plastered old surfaces including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex. Engineer before use)

83


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 66.00 16.00


Sq.m. 35.00 13.00


22 Sq.m. 34.00 12.00


Sq.m. 44.00 15.00

20 BDO

7B

Providing and applying three coats of flat oil paint of approved colour and shade to internal/ External plastered old/new surfaces including scaffolding if necessary, cleaning and preparing the surface including primer coat complete. (Sample and brand is to be got approved from Ex.Engineer before use)

21 BDO 8

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (Sample and brand is to be got approved from Ex. Engineer before use)

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (Sample and brand is to be got approved from Ex. Engineer before use)

23 BDO

8A

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (Sample and brand is to be got approved from Ex. Engineer before use)

84


Completed Labour

SR.NO. & CODE

NO.



85


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 43.00 15.00


Sq.m. 20.00 6.00


Sq.m. 14.50 6.00


24 BDO

8A

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. (Sample and brand is to be got approved from Ex. Engineer before use)

25

BDO

8C

Providing and applying priming coat over new wood and wood based surfaces, including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete. (Sample and brand is to be got approved from Ex. Engineer before use)

26 BDO

8D

Providing and applying priming coat over new steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete. (Sample and brand is to be got approved from Ex.Engineer before use)

86


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 20.00 7.00


Sq.m. 11.50 7.00

Spec.No. : As directed by Engineer-in-charge.

29 Sqm 78.00 28.00


27

BDO

8E

Providing and applying priming coat on concrete/masonry/ Asbestos Cement /plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. (Sample and brand is to be got approved from Ex. Engineer before use)

28 BDO

Providing and applying one coat of seal cement primer of approved manufacture and shade including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. (Sample and brand is to be got approved from Ex. Engineer before use)

Providing and applying exterior emulsion water based water proof cement paint of approved colour and shade to exterior old/new surface in two coats including scaffolding preparing the surface to receive paint etc. complete

84

BD - P : COLOUR / WHITE WASHING , DISTEMPERING


Completed Labour

Sq.m. 11.00 3.50

Sq.m. 5.50 3.50

Spec.No.: Bd.P.1/Page No.411

Sq.m. 8.50 4.50


Sq.m. 9.00 3.50


Sq.m. 10.50 4.70


SR.NO. & CODE

NO.


1

BDP

Providing and applying primer coat for wall surface to receive oil bound distemper treatment.


2 BDP 1

Providing and applying whitewash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down complete.

3 BDP 1A

Providing and applying whitewash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down complete.

4 BDP

2

Providing and applying colourwash of approved colour and shade in one coat to new surface including scaffolding and preparing the surface by brushing and brooming down (including base coat of white wash) etc. complete.

5 BDP

2A

Providing and applying colourwash of approved colour and shade in two coats to new surface including scaffolding and preparing the surface by brushing and brooming down (including base coat of white wash) etc. complete.

85


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 12.50 5.85


Sq.m. 8.50 4.70


Sq.m. 9.50 4.70


Sq.m. 10.50 5.85


i ) For old surface Sq.m. 16.00 5.85

ii ) For New surface Sq.m. 18.00 5.85

6 BDP

2B

Providing and applying colourwash of approved colour and shade in three coats to new surface including scaffolding and preparing the surface by brushing and brooming down (including base coat of white wash) etc. complete.

7 BDP 3

Providing and applying colourwash of approved colour and shade in one coat to old surfaces which are to be recoloured including scaffolding and preparing the surfaces by brushing and brooming down (including base coat of white wash) etc. complete.

8 BDP 3A

Providing and applying colourwash of approved colour and shade in two coats to old surfaces which are to be recoloured including scaffolding preparing the surface by brushing and brooming down (including base coat of white wash) etc. complete.

9 BDP

3A

Providing and applying colourwash of approved colour and shade in three coats to old surfaces which are to be recoloured including scaffolding, and preparing the surface by brushing and brooming down (including base coat of white wash) etc. complete.

10

BDP

5

Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces (excluding the primer coat) complete.

86


Completed Labour

SR.NO. & CODE

NO.



87


Completed Labour

SR.NO. & CODE

NO.










Sq.m. 1.75 1.20

15 Sqm 58.00 30.40

11

BDP

5A

Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat) complete.

12 BDP

6

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding and preparing the surfaces (including the primer coat) complete.

13

BDP 7E

Providing and applying washable Acrylic emulsion paint of approved colour and shade to existing surface in two coats including scaffolding, preparing the surface to receive paint including primer coat etc. complete.


14 BDP

Extra for washing and cleaning of decorated wall surfaces with soap, soda and water.


Providing and applying putty to old / new plastered surfaces in two coats to receive approved paint in all positions including all materials,labour scaffolding and curing etc. complete.

88


Completed Labour

SR.NO. & CODE

NO.



87

BD - Q : WOOD WORKDESCRIPTION OF ITEMS UNIT

Completed Labour

Rmt. 285.00 36.00


2 Sq.m. 1115.00 352.00


3 Sq.m. 790.00 242.00


SR.NO. & CODE

NO.


1 BDQ

Providing and fixing in position P.V.C. hand rail of approved quality, make and shade including M.S. plate of required size as directed etc. complete. (50 mm size)

Providing and fixing double leaf steel shutter with frame to wall cupboard of 18 gauge M.S.sheet as per standard drawing including oxidised fixtures and fastenings with locking arrangment including G.I.Sheet shelves at 40 cm center to center including primer coat and three coats of enamel paint of approved colour and pattern finishing fixing in position complete.

Providing and fixing double leaf steel shutter with frame to wall cupboard of 18 gauge M.S.sheet as per standard drawing including oxidised fixtures and fastenings with locking arrangement excluding shelves, including primer coat and three coats of enamel paint of approved colour and pattern, finishing fixing in position complete.

88


Completed Labour

SR.NO. & CODE

NO.


4 Sq.m. 615.00 250.00


Cu.m. 80300.00 7340.00

Spec.No.: Bd.Q.5/Page No.423

Providing and fixing 12.5 mm. Thick GYPSUM board (conforming be I.S.2093-1982) panelling on plastered/unplastered brick block/concrete walls, Gypboard screw fixed with dry wall screw 25 mm. at 300 mm. Centres to perimeter channels of size 27 mm., 0.5 mm. thick having one flange of 20 mm. and another flange of 30 mm. alongwith ceiling sections of 0.55 mm. Thickness having knurled wedge of 51.5 mm. and 2 flanges of 26 mm. at 610 mm.c/c. pads with Dab fixer placed at appropriate distances at top and bottom under the ceiling section including good quality of approved sundry materials and finishing smooth including filling and finishing with jointing compound and paper tape and two coats of primer etc. complete upto the satisfaction of Engineer- in-charge. ( Prior approval shall be obtained from S.E. before inclusion of this item)

5 BDQ 5

Providing and fixing country teak wood common rafters, purlins and purlins cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc. including scaffolding if necessary all iron work and one coat of primer complete.

89


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 35450.00 5575.00


6 BDQ

5A

Providing and fixing jungle wood common rafters, purlins, and purlins cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing for weather shed etc. including scaffolding if necessary, all iron work painted with one coat of primer complete.

90


Completed Labour

SR.NO. & CODE

NO.


Rmt. 88.00 12.85


Rmt. 130.00 15.20

Spec.No.:Bd.Q.22/Page No.434

Rmt. 655.00 132.00


Rmt. 185.00 34.00


Sq.m. 1080.00 294.00


7 BDQ

22

Providing and fixing jungle wood ballies of approved species 85 mm average dia. for common rafters, purlins, ridges, hip and valley rafters, jack rafters, wall plates, post plates, posts etc. including all iron work scaffolding if necessary and oiling in one coat complete.

8 BDQ

23

Providing and fixing 100 mm dia. Country teak wood ballies for post truss of 6.00 m. span as per drawing or as directed by Engineer- in-charge including all iron work, scaffolding if necessary and oiling complete.

9 BDQ

8

Providing and constructing superior indian teak wood hand rail of 60 mm x 70 mm as per detailed drawings or as directed by the Engineer, including french polishing complete.

10

BDQ

Providing and fixing in position PVC hand rail of approved quality, make and shade excluding M.S. Plate as directed complete.

11

BDQ

Providing and fixing shelf of 25 mm thick black board 30cm wide with C.T.W. Wood brackets of 45 x 35 mm at 1.2m C/C without filletes including primer coat complete.

91


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1450.00 558.00


Sq.m. 1840.00 558.00


14 Sq.m. 1570.00 183.00

12

BDQ

11

Providing and fixing 20 mm thick superior veneer board pelmet box 150 to 200 mm wide to doors or window frames including 20mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top) complete.

13

BDQ

11A

Providing and fixing 20 mm thick Laminated sheet board pelmet box 150 to 200mm wide to doors or window frames including 20 mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top) complete.

Providing and fixing single/double leaf PVC shutter with frame to wall cupboard of approved colour made out of extruded rigid PVC hollow section DWUF-306 shutter frame of size 33 mm x 47 mm having double wall construction as vertical styles,and top,bottom rail of required size and the panel in fill SPUF-101 multichamber hollow plastic section of size 20 mm x 200 mm joined each other by tongue and groove interlocking system duly inserted in shutter frame and all shutter frames, lock rails, styles reinforced by seasoned wood inserted inside for fixing of hinges, aldrops and other required fixtures etc. all corners should be machine cut, joined each other by metal screw after inserting rigid "L" bracket PVC reinforcement of size 125 mm x 200 mm including synthetic metal fixtures and fastenings, remaking damaged surface etc. complete.

92


Completed Labour

SR.NO. & CODE

NO.



91

BD - R : ROOFING AND CEILINGDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.m 720.00 58.00

b) For 20 B.W.G. 805.00 58.00

Spec.No.: Bd.R.5/Page No.452

Rmt. 635.00 51.00

b)For 20 B.W.G. 710.00 52.00


Sq.m. 375.00 53.00


Sq.m. 380.00 53.00


SR.NO. & CODE

NO.


1 BDR

5(a)

a) Providing and fixing corrugated galvanised iron sheets of 22 B.W.G. for roofing with wind ties including fastening with galvanised iron screw and bolts and lead and bitumen washers as per drawing complete.

2

BDR 6

a) Providing and fixing G.I.Sheets of 22 B.W.G. over the ridge, hip or valley for galvanised corrugated iron sheet roofing including fastening with galvanised iron screws and bolts and lead and bitumen washers, including filling gaps by C.M.1:3 etc.complete.

3

BDR

7

Providing and fixing 6 mm thick Asbestos Cement semi corrugated (Big size) sheet roofing including galvanised iron J and L hook bolts, galvanised iron and bituminous G.I. washers, galvanised iron clamps and bolts and nuts and scaffolding etc. complete.

4

BDR

8

Providing and fixing 6 mm thick Asbestos Cement Semi Corrugated/ Trafford sheet roofing including galvanised iron J and L hook bolts, galvanised iron and bituminous washers,galvanised iron clamps, bolts and nuts and scaffolding etc. complete.

92


Completed Labour

SR.NO. & CODE

NO.


Rmt. 270.00 47.00


Rmt. 1940.00 110.00

b) For 20 B.W.G. 2075.00 110.00


Rmt. 1520.00 81.00

Spec.No.: Bd.R.10/ Page No.455

b) For 20 B.W.G. 1570.00 81.00

No. 61.00 12.00


5

BDR

9

Providing and fixing 6mm thick Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts and nuts including scaffolding etc. complete.

6 BDR 10

a) Providing and fixing valley gutter of 22 B.W.G. plain galvanised iron sheets 120 cm. wide with brackets of 20 x 20 x 2.5 mm angles including two coats of coal tarring the upper surface of plank (excluding painting to under side of plank) complete.

7

BDR

10A

a) Providing and fixing valley gutter of 22 B.W.G. plain galvanised iron sheets 90 cm wide with 20 x 20 x 2.5 mm angles placed @ 90 cm C/C including painting of angle, drilling holes placing in position etc. (excluding painting to under side of plank) complete.

8 BDR

Providing and fixing Asbestos cement cowl ventilators in asbestos cement sheet roofing at the required places, including all accessories and scaffolding necessary complete.

93


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 860.00 85.00


Sq.m. 970.00 95.00

Spec.No.:Bd.R.17/Page No.461

Sq.m. 950.00 110.00

Spec.No.: Bd.R.18/Page No. 461

9

BDR 16

Providing and fixing false ceiling of plain asbestos cement sheets 4mm thick with country teak wood beading of 45 x 12 mm with frame work of country teak wood battens of size 70 x 60 mm at 1.20 m centre to centre including scaffolding, if necessary, all iron work and painting the visible surfaces of A.C. sheet and beading with two coats of approved oil paint complete. (excluding T.W. runner, to be paid separately).

10

BDR

17

Providing and fixing false ceiling of T.W. particle board half perforated sheet 12 mm thick with frame work of country teak wood battens of size 70 x 45 mm and 35 x 35 mm at 60 cm Centre to Centre including scaffolding,if necessary, all iron work and painting the visible surfaces of boards and beading with two coats of approved paint etc. complete. (excluding runner to be paid separately)

11

BDR 18

Providing and fixing false ceiling of 15 to 20 mm thick decorative boards of fibrous plaster of paris including scaffolding,if necessary, frame work of countryteak wood battens of 70 x 45 mm and 35 x 35 mm at 45 cm Centre to Centre without beading, all architectural work like moulding, cornices, eaves, domes, cups as per detailed drawings and painting the visible surfaces with three coats of approved oil paint and painting the wood work with one coat of approved oil paint complete. (Excluding runner and mild steel suspenders)

94


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1300.00 110.00


Sq.m. 1260.00 54.00


Rmt. 235.00 56.00


Rmt. 1430.00 110.00


No. 64.00 22.00


No. 75.00 24.00

12 BDR

19

Providing and fixing false ceiling of 12mm thick acoustic boards of approved make, with shapes and sizes as per drawings including scaffolding, frame work of country teak wood battens of size 70 x 45 mm and 35 x 35 mm at 60 cm centre to centre, all screws and fastenings and finishing complete. (Excluding runner to be paid separately).

13

BDR

Providing and fixing skylight in R.C.C. roof including M.S. frame with all accessories and required fixtures and fastening fitting etc. complete.

14

BDR 36

Providing and fixing asbestos cement (60cm x 15cm x 23cm) valley gutters of approved size and make including drop ends, stop ends necessary fixtures and fastening the same as per code of standard practise complete.

15 BDR

Providing and fixing valley gutters of 24 B.W.G. G.I. sheet 120cm with 20mm thick country cut teak wood planking underneath coal tarring etc. complete.

16 BDR

Providing and fixing 12 mm dia. Mild steel bar upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete.

17 BDR

Providing and fixing 16 mm dia. mild steel bars upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete.

95


Completed Labour

SR.NO. & CODE

NO.



96


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1080.00 146.00


19

i. White Sheet Sq.m. 555.00 66.00

ii. Coloured Sheet Sq.m. 600.00 66.00

18 BDR

45

Supplying and fixing and laying in Grid UNILOCK FALSE CEILING SYSTEM, size of the Grid 610 mm x 610 mm of which main runner shall be aluminium silver anodised 25 micron bulb "T" (U-202) of size 35 x 23.5 x 1.5 mm suspended at 1200 mm centre to centre with 6 mm M.S.Hanger rod with ends connected with G.I. clamps and adjustable G.I.J. hooks, cross "T" shall be aluminium silver anodised 5 micron (U-404) of size 23.5 x 23.5 x 1.5 mm fixed to wall with dash through screws. The finished grid shall contain 9.5 mm Gypsum board with coated ceiling tiles with two coats of roller finish top coat complete. (Prior permission of S.E to be obtained before inclusion of item in estimate)

Providing and fixing 2mm thick fibre glass reinforced plastic transparent sheet matching with coloured asbestos profile / G.I. profile roofing including galvanised "J" and ‘T’ hooks, bolts galvanised iron and bituminous washer, galvanised iron clamps and bolts nuts and scaffolding complete.

97


Completed Labour

SR.NO. & CODE

NO.


20 Sq.m. 1060.00 360.00Providing and fixing suspended white/colour

decorative ceiling of gypsum board which

includes G.I. Perimeter channel ( MF6) of size

0.40 mm thick ( having one flange of 20 mm

and another flange of 30 mm and web of 27

mm) along with perimeter of ceiling, screw

fixed to brick wall / partition with the help of

nylon sleeves and screws at 610 mm centers.

Thereafter suspending G.I. intermediate

channel ( MF 7) 600 mm. C/C of size 45mm

(0.9 mm thick with two flanges of 15 mm each)

from the soffit at 450 mm centre with

connecting angle (ie ceiling angle) of width

25mm x 10mm x 0.40mm thick fixed to soffit

with G.I.cleat and teel expansion fasteners.

Celling sections ( MF 5 ) of 0.55 mm thickness

having knurled web of 51.5 mm and two

flanges of 26 mm each with lips of 10.5 mm

are then fixed to the intermediate channel with

the help of connecting clip and in direction

perpendicular to the intermediate channel at

450 mm centers. 12.5 mm tapered

edge Gyp board (conforming to IS 2095 -

1982) is then screw fixed to celling section

with dry wall screws at 230 mm centers.

Screw fixing is to be done mechanically with

suitable attachment. The boards are to be

joined and finished so as to have flush look

which includes filling and finishing the tappered

& square edges of the boards with jointing

compound, joint paper tape and appropriate

suitable primer and three coats of plastic

acrylic paint. The item includes for light fitting,

grill diffuseres and cut out etc. have to be

made with frame of perimeter channels of size

20mm x 30mm x0.55mm.thick supported

suitable and angle bead is to be used at steps

to get straight line finish etc. complete

98


Completed Labour

SR.NO. & CODE

NO.



21 Sq.m. 1460.00 278.00


Providing and fixing and laying in grid unilock false ceiling system size of grid 610 mm x 610 mm of which G.I. wall channel shall be of size 0.5 mm thick 20 mm x 30 mm flanges and web of 27 mm along the perimeter of wall where ceiling meets the wall fixed to wall using nylon sleeves and screw at 610 mm centres suspended G.I. main runner size 45 x 0.9 mm thick with 15 mm flanges from trusses at 900 mm centres using ceiling angle size 25 x 10 x 0.5 mm, nut bolt clip connected @ 300 mm centres to the main runner or having strips of G.I. of size that of runner for holding runner and mesh etc. the G.I.ceiling sections having size 51.5 mm and two flanges 26 mm each with lips of 10.5 mm. The finished grid shall contain 12 mm thick plain / decorative particle boards fixed to the ceiling frame structure. (Prior permission S.E. to be obtained before inclusion of this item )

99


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1800.00 184.00

Sq.m. 330.00 41.00


Sq.m. 340.00 44.00


22 BDR

21

Providing & fixing of approved make PVC false ceiling on M.S. Rectangular hollow section 38mm x 25mm fixed to wall with PVC roll plugs and duly main runner & intermediate section of M.S.square tube 25mm x 25mm duly coated with anti corrosive primer & ceiling panel made out of rigid PVC multichamber hollow section of size 6mm x 250mm. Joined with concealed screws fixed on structure and no frame elements is visible from outside including suspenders and necessary holes/cuts for light fixtures and remaking damaged surface etc. (Prior permission of S.E. to be obtained before inclusion of this item in this estimate) complete.

Specification- as directed by Engineer-incharge

23 BDR 1

Providing and fixing Mangalore tiled roofing with class "AA" tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire, fixing 50mm x 25mm horizontal teak wood battens and iron works and oiling the battens complete. (excluding ridge and hip tiles)

24 BDR

2

Providing and fixing Mangalore tiled roofing with class "AA" tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire, fixing country teak wood sloping battens of 25 mm x 12 mm, teak wood horizontal battens of 50 mm x 25 mm over the sloping battens, all iron works and coal tarring the battens complete. (excluding ridge and hip tiles)

100


Completed Labour

SR.NO. & CODE

NO.


Rmt. 95.00 27.00


No. 420.00 22.00


Sq.m. 125.00 14.00


25

BDR

Providing and fixing Mangalore tile ridge and hip tiles of class "AA" including scaffolding if necessary, pointing with coloured cement mortar and curing complete.

26 BDR

Providing and fixing glass tiles of Mangalore type at required places in Mangalore tile roof including scaffolding necessary.

27 BDR

Providing and fixing new Mangalore tiles with "AA" class tiles including scaffolding complete.

101


Completed Labour

SR.NO. & CODE

NO.


No. 70.00 9.00


Sq.m. 655.00 36.00

b) For 20 B.W.G. 720.00 36.00


Rmt. 75.00 6.00


Rmt. 42.00 4.50


32 Sqm 1230.00 70.00


33 Rmt. 1060.00 70.00

28

BDR

Providing and fixing Mangalore pattern cowl ventilator tiles in the required places in a Mangalore tiled roof including scaffolding necessary.

29

BDR

5

a) Providing and fixing corrugated galvanized iron sheets of (22 B.W.G.) for roofing without wind ties including fastening with galvanized iron screw and bolts and lead and bitumen washers as per drawing complete.

30

BDR

Providing and fixing country teak wood battens 50 mm x 25 mm for Mangalore tile roof work with all iron work, scaffolding and oiling the battens complete.

31 BDR

Providing and fixing country teak wood battens 25 mm x 25 mm for Mangalore tile roof work with all iron work, scaffolding and oiling the battens complete.

Providing and fixing G.I. precoated metacolour sheet of 0.50 mm thick and 930 profile for roof including roof bolt and necessary fixing arrangements ( Prior approval of Sample and brand by Ex. Engineer is necessary before use)

Providing and fixing G.I. precoated metacolour accesories of 0.50 mm thick and 600 mm wide for ridge / valley including roof bolt and necessary fitting arrangements ( Prior approval of Sample and brand by Ex. Engineer is necessary before use)

102


Completed Labour

SR.NO. & CODE

NO.



103


Completed Labour

SR.NO. & CODE

NO.


34 Sqm 600.00 142.00Providing and fixing false ceiling of 12 mm

thick of fibrous plaster of paris which

includes G.I. Perimeter channel ( MF6) of size

0.40 mm thick ( having one flange of 20 mm

and another flange of 30 mm and web of 27

mm) along with perimeter of ceiling, screw

fixed to brick wall , concrete surface, partition

with the help of nylon sleeves and screws at

610 mm centers. Thereafter suspending G.I.

intermediate channel ( MF 7) 600 mm. C/C of

size 45mm (0.9 mm thick with two flanges of

15 mm each) from the soffit at 450 mm centre

with connecting angle (ie ceiling angle) of width

25mm x 10mm x 0.40mm thick fixed to soffit

with G.I.cleat and teel expansion fasteners.

Celling sections ( MF 5 ) of 0.55 mm thickness

having knurled web of 51.5 mm and two

flanges of 26 mm each with lips of 10.5 mm

are then fixed to the intermediate channel with

the help of connecting clip and in direction

perpendicular to the intermediate channel at

450 mm centers. 12.5 mm tapered

edge is then screw fixed to celling section

with dry wall screws at 230 mm centers.

Screw fixing is to be done mechanically with

suitable attachment. The boards are to be

joined and finished so as to have flush look

which includes filling and finishing the tappered

& square edges of the boards with jointing

compound, joint paper tape and appropriate

suitable primer and three coats of oil bound

distemper . The item includes for light fitting,

grill diffuseres and cut out etc. have to be

made with frame of perimeter channels of size

20mm x 30mm x 0.55mm.thick supported

suitable and angle bead is to be used at steps

to get straight line finish etc. complete


101

BD - T : DOORS AND WINDOWSDESCRIPTION OF ITEMS UNIT

Completed Labour

a) Sq.m 3060.00 587.00

b) Sq.m 3225.00 587.00

Spec.No.: Bd.T.30/Page No.496

SR.NO. & CODE

NO.


1 BDT

30

Providing and fixing double leaf door,with country teak wood shutter and panels as per detailed drawing including iron oxidised fixtures and fastening stoppers and finishing with one coat of primer complete. (Excluding door frame) (Sample to be got approved from Ex. Engineer before use)

Panels of exterior grade veneered particle board 12 mm thick 3 layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin with commercial veneers on both sides conforming to I.S. 3097 – 1980 Novateak or equivalent and door conforming to I.S.1003 - 1957(Revised)(1977)

Panels of 12 mm thick, exterior grade prelaminated particle board laminated on both side.

102


Completed Labour

SR.NO. & CODE

NO.


a) Sq.m 2510.00 587.00

b) Sq.m 2950.00 587.00

Spec.No.:Bd.T.31/Page No.499

2 BDT

31

Providing and fixing single leaf door,with

country teak wood shutter and panels

as per detailed drawing including iron

oxidised fixtures and fastening stoppers

and finishing with one coat of primer

complete. (Excluding door frame)

(Sample to be got approved from Ex.

Engineer before use)

panels of exterior grade veneered particle board 12 mm thick 3 layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin with commercial veneers on both sides conforming to I.S. 3097 – 1980 Novateak or equivalent and door conforming to I.S.1003 - 1957(Revised)(1977)

panels of 12 mm thick, exterior grade prelaminated particle board laminated on both side.

103


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2165.00 374.00

b) For 32 mm thick 1955.00 374.00


Sq.m 2365.00 403.00

b) For 32 mm thick 2150.00 403.00

Spec.No.: Bd.T.35/page No.500

3 BDT

34

a) Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) , approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, wrought iron holdfasts, chromium plated fixtures and fastenings , chromium plated handles on both sides, stoppers and finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use)

4

BDT

35

a) Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including chromium oxidised fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use)

104


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1960.00 161.00

Spec.No.: Bd.T.55/Page No.510.

Sq.m. 2280.00 220.00

Spec.No.: Bd.T.56/Page No.511.

Sq.m. 2380.00 294.00

Spec.No. : Bd. T. 57/Page No. 511.

5 BDT

55

Providing and fixing rolling steel shutters fabricated from 20 guage steel laths with slide guides, bottom rail, brackets, door suspension shaft including rolling springs, locking arrangement and housing box at top including one coat of red lead primer etc. complete.

6

BDT

56

Providing and fixing rolling steel shutters fabricated from 18/20 guage steel laths with slide guides, bottom rail, brackets, door suspension shaft, housing box at the top including mechanical gear operation arrangement and one coat of red lead primer etc. complete.

7

BDT

57

Providing and Fixing collapsible steel gates in two leaves with channel pickets, pivoted flat bars, including top and bottom guides, rollers, stoppers, handles, all fitting accessories, locking arrangement and one coat of red lead primer etc. complete.

105


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 500.00 74.00

Sq.m 3200.00 515.00

b) For 32 mm thick Sq.m 3060.00 515.00

Sq.m. 2555.00 587.00

8

BDT

95

Providing and fixing 24 guage PLAIN ALLUMINIUM SHEET on the face of door shutter including cutting to required size and fixing by screws including making good the damages if any to existing door shutter and frame etc. complete as directed or as per detailed drawing.


9

BDT

110

a) Providing and fixing factory made soild core flush door 35 mm thick (I.S.2202 – 1962 Revised 1966) in single leaf 35mm thick with glazed ventilator commercial type of exterior of seasoned wood frame 60mm x 100mm with approved commercial ply wood facing wrought iron hold fast Aluminium fixtures and fastening and handles on both sides finishing with oil painting 3 coats etc. complete. (Sample to be got approved from Ex.Engineer before use)

Spec.No: As directed by Engineer- in-charge

10

BDT

118

Providing and fixing crimped wire netting single shutter door with 60 mm x 100 mm country teak wood door frame including oil painting 3 coats and iron oxidised fixtures and fastening complete.


106


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1353.00 220.00

Sq.m. 1050.00 148.00

Sq.m. 680.00 132.00

11 BDT 122

Providing and fixing M.S. grill doors weighing 22 to 24 kg per sq. meter of required size as per detailed drawing without hot dip coating with iron oxidised fixture and fastening and painting with 3 coats oil paints etc. complete. (Sample to be got approved from Ex. Engineer before use)


12 BDT

134

Providing and fixing steel frame of door of angle 50 x 50 x 6 mm with 16mm dia. M.S. bars fixed horizontally at 10 cm C/C for ventilator portion including iron holdfasts, boxes for fixing shutters including welding, painting, finishing etc. complete.


13

BDT

135

Providing and fixing steel frame of door of angle 40 x 40 x 5 mm with 16mm dia. M.S. bars fixed horizontally 10 cm c/c for ventilator portion including iron holdfasts, boxes for fixing shutters including welding, painting, finishing etc. complete.


107


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 870.00 169.00

Sq.m. 695.00 125.00

Sq.m. 720.00 139.00

14 BDT

135A

Providing and fixing cold rolled steel frame for door 100 mm x 60 mm of 16 guage as per drawing with/without ventilator including holdfasts, hinges welded to the frame, including filling cement mortar 1:6 in hollow core and finishing with oil painting etc. complete.


15 BDT

135B

Providing and fixing door frame of mild steel hot rolled section of standard EZ-7 conforming to I.S: 7452-1982 as per drawings with/ without ventilator, holdfasts, hinges welded to the frame and finishing with oil painting etc. complete. (Sample to be got approved from Ex. Engineer before use)


16 BDT

135C

Providing and fixing door frame of mild steel hot rolled section of standard EZ-7 conforming to IS: 7452-1982 with Hot dip Zinc coating as per drawing with/without ventilator, holdfasts, hinges welded to the frame and finishing with oil painting etc. complete. (Sample to be got approved from Ex. Engineer before use)


108


Completed Labour

SR.NO. & CODE

NO.


17 Sq.m. 860.00 168.00

18 Sq.m. 2400.00 585.00

19 Sq.m. 3270.00 470.00

b) For powder coated aluminium doors Sq.m. 3140.00 470.00

Providing and fixing pressed steel door box frame of M.S.sheet made of 18 guage thick of required section with rebate of 10 mm for required thickness of shutters and tie rod of 12mm square bar at bottom as per specifications with or without ventilators including holdfasts, hinges welded to the frame, filling in box frame in C.M. 1:10 and finishing with 2 coats of oil painting etc. complete.


Providing and fixing 25 mm thick 3 layers flat pressed T.W. particle board shutters with B.W.P.type exterior grade phenol formaldehyde resin conforming to I.S.12823-1990 both sides laminated and covered with M.S. box frame. (Sample to be got approved from Ex. Engineer before use)


a) Providing and fixing anodised aluminium fully glazed doors including door frame with powder coating 5 mm thick sheet glass necessary fixtures and fastenings, neoprene type rubber plain gaskets as per detailed drawing and specifications etc. complete. (Sample to be got approved from Ex. Engineer before use)


109


Completed Labour

SR.NO. & CODE

NO.


20 Rmt. 265.00 58.00

21 Sq.m. 1660.00 410.00

Sq.m. 550.00 58.00

Providing and fixing factory made precast door/window frames of C.C. M-40 grade of section 100 mm x 60 mm including reinforcement as per I.S.6523 with polymeric blocks having screw holding capacity of 250 kg/screw fixed in position in R.C.C.frame as per requirement and as per specifications without fan light including holdfasts, carting and erecting in position and two coats of oil paint etc. complete.


Providing and fixing 18 guage M.S. sheet door with frame work 40 x 40 x 6 mm M.S. Angle including locking arrangements, hold fast including applying anticorrossive primer coat of red lead paint and 2 coats of oil paint complete.


22 BDT

22

Providing and fixing of approved make PVC door frame made out of rigid PVC hollow section of size 38mm x 32mm. Machine cut with solid polymeric reinforcement for holding hinges and the rod at bottom including fixing 100mm. Long full threaded metal screws in required Nos. in PVC roll plugs inserted in wall as hold fast and remaking damaged surface etc. complete.

Specification -as directed by Engineer incharge.

110


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 810.00 88.00

Sq.m. 1010.00 110.00

Sq.m. 2420.00 147.00

23 BDT

23

Providing and fixing of approved make PVC door frames made out of rigid PVC hollow section of size 48mm x 40mm. Machine cut with solid polymetric reinforcement for holding hinges and tie rod at bottom including fixing 100mm. Long full threaded metal screws in PVC roll plugs inserted in wall as hold fast and remaking damaged surface etc. complete.

Specification - As directed by Engineer Incharge.

24

BDT 24

Providing & fixing of approved make PVC door frames made out of rigid PVC hollow section of size 60mm x 50mm Machine cut with solid polymetric reinforcement for holding hinges and tie rod at bottom including fixing 100mm long full threaded metal screw in PVC roll plugs inserted in wall as hold fast and remaking damaged surface etc. complete.

Specification : As directed by Engineer-in-charge

25 BDT

25

Providing & fixing of approved make solid Panel of 29mm thick PVC single leaf door shutter of approved colour and design made out of rigid PVC hollow section shutter frame in configuration of A section of size 50mm x 29mm as vertical styles, top & bottom rails Machine cut and panel in fill of single panel multi chambers hollow plastic section of size 25mm x 750mm. with solid polymetric 'L' corner reinforcement holding brackets and solid polymetric reinforcement fillers for holding hinges, aldrops, latch, tower bolts, etc. remaking damaged surface etc. compete.

111


Completed Labour

SR.NO. & CODE

NO.


Specification - As directed by Engineer Incharge.

112


Completed Labour

SR.NO. & CODE

NO.


26 Sq.m. 2095.00 14.00

27 Sq.m. 2660.00 132.00

Providing & fixing of approved make solid Panel of 24mm thick PVCsingle leaf door shutter made out of rigid PVC hollow section shutter frame in configuration of A section of size 24mm x 45mm as vertical styles, top and bottom rails Machine cut and panel in fill plain multi chamber hollow plastic section of size 20mm x 200mm joined each other by tongue and groove inter locking system with polymetric 'L' corner reinforcement holding, bracket & solid polymeric reinforcement fillers for holding hinges, aldrops, latch, tower bolts etc. and remaking damaged surface etc.complete.

Specification : As directred by Engineer Incharge.

Providing and fixing single leaf door shutter of approved make and colour made out of extruded rigid PVC hollow section DWUF-306 shutter frame of size 33 mm x 47 mm having double wall construction as vertical styles, top and bottom rails and middle locks rail of size 33 mm x 94 mm and the panel in fill SPUF-101 multichamber hollow plastic section of size 20 mm x 200 mm joined each other by tongue and groove interlocking system duly inserted in shutter frame and all shutter frames, lock rails, styles reinforced by seasoned wood inserted inside for fixing of hinges, aldrops, tower bolts and door stoppers etc. all corners should be Machine cut, joined each other by metal screw after inserting rigid "L" bracket PVC reinforcement of size 125 mm x 200 mm. Including synthetic metal fixtures and fastenings, remaking damaged surface etc. complete.

113


Completed Labour

SR.NO. & CODE

NO.



114


Completed Labour

SR.NO. & CODE

NO.


28 Sq.m. 3715.00 146.00

Sq.m. 3580.00 146.00

Sq.m. 1925.00 199.00

Sq.m. 2320.00 199.00


a) Providing and fixing in position alluminium louvered windows/ ventilators of various sizes with powder coating as per detailed drawings and specifications including aluminium frames 80 x 38 mm box type 5 mm thick sheet glass louveres, clips / rubber plain P.V.C. gaskets of approved quality etc.complete. (Sample to be got approved from Ex. Engineer before use)

b) For powder coated aluminium window / ventilator


29 BDT

53

a)Providing and fixing steel windows of various sizes as per detailed drawings without hot dip zinc coating without/with ventilator including fabrication, glazing with non-acetinic/plain/obscured glass panels of approved type and quality, all fixtures and fastening without teak wood boxing, and architraves and finishing with one coat of primer complete. (Sample to be got approved from Ex. Engineer before use)

b) With M.S. Box frame of size 40mm x 40mm x 2mm thickness all around

115


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2075.00 206.00

Sq.m 2370.00 206.00


Sq.m 2580.00 295.00

Sq.m 2875.00 295.00


30

BDT

53A

a)Providing and fixing steel windows of various sizes as per detailed drawings without hot dip zinc coating without/with ventilator including fabrication, glazing with non-acetinic/plain/obscured glass panels of approved type and quality, all fixtures and fastening without teak wood boxing and architraves and finishing with one coat of primer complete. (with flash butt welding) (Sample to be got approved from Ex. Engineer before use)

b) With M.S. Box frame of size 40mm x 40mm x2mm thickness all around

31 BDT 53A

a)Providing and fixing steel windows of various sizes as per detailed drawings with welded square bars 12 mm at 10cm centre to centre without hot dip Zinc coating without/with ventilator including fabrication, glazing with non-acetinic / plain /obscured glass panels of approved type and quality, all fixtures and fastenings without teak wood boxing, and architraves and finishing with one coat of primer complete. (Sample to be got approved from Ex. Engineer before use)


116


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2735.00 309.00

Sq.m 3025.00 306.00

Sq.m 3730.00 735.00

3590.00 735.00

32 BDT

53B

a)Providing and fixing steel windows of various sizes as per detailed drawings with welded square bars 12 mm at 10 cm centre to centre without hot dip Zinc coating without / with ventilator including fabrication glazing with non- acetinic/plain/obscured glass panels of approved type and quality, all fixtures and fastenings without teak wood boxing, and architraves and finishing with one coat of primer complete. (with flash butt welding) (Sample to be got approved from Ex. Engineer before use)



33 BDT

97

a) Providing and fixing in position Double anodised alluminium windows / ventilators of various size with openable / sliding aluminium frame, 5 mm thick plain sheet glass shutter, glazing clips / neoprene / rubber / PVC Gasket of approved quality, chromium plated brass wigs, other aluminium fixture and fastenings,handle, stopper etc. complete including making the damaged structure to its original condition. (Sample to be got approved from Ex. Engineer before use)

b) For powder coated aluminium window / ventilator


117


Completed Labour

SR.NO. & CODE

NO.


Sq.m 4140.00 735.00

Sq.m 3960.00 735.00

Sq.m 3775.00 792.00

Sq.m 3665.00 792.00

34 BDT

98A

a) Providing, supplying and fixing in position anodised extruded aluminium casement / openable window of outer frame size 44mm x 44mm or as of required size with proportionate change in weight of average weight @ 0.90 kg per metre and shutter of 44 mm x 64 mm ( or as required size ) of average weight of 0.30 kg per metre (or as required) with plain sheet glass with neoprene/rubber gasket with hinges, locking arrangement, pegstay etc. as per approved drawing, specification etc. complete.(as per Architect's drawing Job No.T-MISC/ 5000 drawing No. 22 dated 3.2.1992) (Sample to be got approved from Ex.Engineer before use)

b) For powder coated aluminium window


35 BDT

98B

a) Providing and fixing in position anodised extruded aluminium fixed glass pannelled window having frame made out extruded tubular section of size 34 mm x 42 mm (or as required size in proportionate weight) of average thickness 1.50 mm and weight 0.726 kg per metre(or as required), mechanically assembled at corners with glazing beading of average 0.26 kg per running metre or required weight including plain sheet glass with neoprene/ rubber gasket etc. complete. (As per Architect's drawing job No. T – MISC/5000/drawing No.22 dated 3.2.1992)

b) For powder coated aluminium window

118


Completed Labour

SR.NO. & CODE

NO.



119


Completed Labour

SR.NO. & CODE

NO.


Sq.m 3710.00 514.00

Sq.m 4040.00 514.00

36

BDT

98C

Supplying and fixing in position aluminium extruded section Two track sliding windows upto 1.2 metre height, outer frame made from section of over all size 62 mm x 45 mm, bottom section with or without drain section, track weighing 0.90 kg per metre and top and side section weighing 0.838 kg per running metre with shutter or sections made of 19 mm x 40 mm size having average weight of 0.6 kg per running metre(or as required size) with change in proportionate weight,with 5.00 mm selected quality plain sheet glass fixed with new neoprene gasket shutters to be provided with nylon encased stainless rollers, necessary locks and handles complete. (As per Architect's drawing no.Job No. T- MISC/5000 Drg.No.22 dated 3.2.1992)


37

BDT

98D

Supplying and fixing in position aluminium extruded section Three track sliding windows upto 1.2 metre height, outer frame made from section of over all size 80 mm x 45 mm, bottom section with or without drain section track weighing 0.90 kg per metre and top and side section weighing 0.838 kg per running metre with shutter or sections made of 19 mm x 40 mm size having average weight of 0.6 kg per running metre(or as required size) with change in proportionate weight,with 5.5. mm selected quality plain sheet glass fixed with new neoprene gasket shutters to be provided with nylon encased stainless rollers, necessary locks and handles complete. (As per Architect's drawing no.Job No. T- MISC/5000 Drg.No.22 dated 3.2.1992)

120


Completed Labour

SR.NO. & CODE

NO.



121


Completed Labour

SR.NO. & CODE

NO.


Sq.m 815.00 132.00

Sq.m 900.00 139.00

Sq.m 1950.00 292.00

38 BDT 120

Providing and fixing M.S. iron bars 16 mm dia for steel windows and ventilators at 10cm C/C including M.S. flat 40 mm x 8mm at centre (vertically) and cutting, welding and painting in two coats of oil paint etc. complete.

Spec.No.:As directed by Engineer- in-charge.

39 BDT

121

Providing and fixing M.S. iron bars of 16 mm dia for steel windows and ventilators at 10cm C/C and M.S. flat 40 mm x 6 mm at sides and 50 mm x 10 mm at centre in windows and ventilators including cutting, welding and oil painting in two coatsetc complete.


40 BDT

123

Providing and fixing steel ventilator fully glazed partly top hung and partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain obscured glass panes of approved type and quality and fastening without teak wood boxing and architecture and oil painting two coats etc. complete. (Sample to be got approved from Ex.Engineer before use)


122


Completed Labour

SR.NO. & CODE

NO.


Sq.m 1340.00 117.00

42 Sq.m 2290.00 293.00

43 Sq.m 3660.00 514.00

Sq.m 3550.00 514.00

41

BDT 133

Providing and fixing steel frame of angle 40 x 40 x 5 mm size with 16 mm dia bars for windows, mild steel bar horizontally at 10 cm C/C for ventilator portion and 15 cm C/C for remaining portion with M.S. plate size 40 x 6 mm vertical at centre including iron holdfasts boxes for fixing 40 x 6 mm fixing shutter including welding, finishing, painting with two coats of oil paint etc. complete (without/ with ventilator)(Sample to be got approved from Ex. Engineer before use)


Providing and fixing steel Louvered windows / ventilators of various sizes as per detailed drawing without hot dip zinc coating including fabrication with approved type and quality all fixtures and fastening without teak wood boxing and architraves including finishing with one coat of primer and two coats of oil painting complete. (Sample to be got approved from Ex.Engineer before use)


a) Providing and fixing anodised aluminium windows with sliding shutters including aluminium frame with powder coating, 5 mm thick sheet glass, necessary fixtures and fastenings, neoprene / plain rubber gaskets as per detailed drawing and specifications etc. complete. (Sample to be got approved from Ex. Engineer before use)

b) For powder coated aluminium windows

123


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2725.00 278.00

Spec. No.: As directed by Engineer-in-charge.

44 BDT

45

Providing & fixing of approved make PVC Openable Glazed Window frame fabricated with rigid PVC hollow section of size 48mm x 40mm & fixing mullion section of size 63.5mm x 40mm with concealed solid polymeric reinforcement shall have mitre cut and fixed with the help of 100mm long full threaded metal screws in PVC roll plugs inserted in wall as hold fast shutter shall be fabricated out of rigid PVC hollow section on size 26mm x 47mm having double wall construction duly fixed with 4mm thick clear vision plain glass with solid polymeric reinforcement for holding hinges, handles, windstay & stoppers at necessary junction and remaking damages surface etc. complete.


124


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2920.00 292.0045 BDT

46

Providing & fixing of approved make three track PVC sliding Glazed window frame fabricated out of rigid PVC hollow section of size 45mm x 96mm with concealed solid polymeric reinforcement shall have mitre cut and fixed with the help of 100mm long full threaded metal screws in PVC roll plugs inserted in wall as hold fast. Sliding shutter shall be fabricated out of rigid PVC hollow section of size 45mm x 58mm and interlocking section of size 5mm x 33mm shall be fixed on vertical member of sliding shutter. The snap fit glazing bid of size 21mm x 18.5mm shall be fixed alongwith sliding shutter for fixing the 5mm thick clear vision glass panel. Necessary hardware such as polyester pile seal, rubber gasket, roller bearing and lock etc. shall be fixed at required junction. Drainage hole shall be made at the bottom of window frame etc. and remaking damaged surface complete.

Spec.No. :As directed by Engineer-in-charge

125


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2170.00 220.00

47 Sq.m 2700.00 331.00

46

BDT

47

Providing & fixing of approved make PVC Louvered / fixed Glazed window / ventilator frame fabricated out of rigid PVC hollow section of size 48mm x 40 mm with concealed solid polymeric reinforcement shall have mitre cut and fixed with the help of 100mm long full threaded metal screws in PVC roll plugs inserted in wall as hold fast. The snap fit glazing bid of size 19mm x 19.5mm shall be fixed alongwith outer frame for fixing the 5mm thick clear vision glass panel or louvered. Necessary hardware such as rubber gasket, louvered glass holding clip shall be fixied at required junction etc. complete.

Spec. No. : As dircted by Engineer-in-charge

Providing & fixing of approved make sand witched type PVC partition 50 mm. Thick paneled/partly glazed in double wall construction made out of M.S.Rectangular hollow tube section of size 38mm x 25mm with anticorrosive primer vertical horizontal members not exceeding in the grid of 1m x 1m and both side wall panels fixed with rigid PVC multi chamber hollow plastic section of size 6mm x 250mm in double wall construction and end sealing with rigid PVC section 71mm x 20mm. The structure shall be fixed in floor walls with PVC roll plugs and 100mm long full threaded metal screws including clear vision plain glass 5mm thick as required and door complete and remaking the damaged surface etc. complete.

Specification : As directed by Engineer Incharge.

126


Completed Labour

SR.NO. & CODE

NO.


Sq.m 1650.00 220.00

Spec.No.: Bd.T.61/Page No. 513

Sq.m 2090.00 235.00


Sq.m 2385.00 294.00


Sq.m 1815.00 294.00

48 BDT

61

Providing and fixing partition of asbestos sheet 6 mm thick with country teak wood frame work consisting of 70 x70 mm vertical and horizontals of 70 x 35 mm and covering battens 20 x 10 mm at 1 m C/C on both ways including finishing with one coat of primer/ french polishing etc complete.

49 BDT

66A

Providing and fixing partition of 12mm thick three layered flat pressed prelaminated teak wood particle board exterior grade, BWP types Bonded with phenol formaldehyde synthetic resin conforming to I.S.12893-1990 including C.T.W. vertical 70 x 70 mm and top central and bottom rails of 70 x 35 mm and covering battens of 20 x 10 mm at 1 m C/C on both ways including finishing with one coat of primer etc complete.

50 BDT

68

Providing and fixing partition with 4mm thick superior Indian teak veneers on both sides including C.T. wood frame work 80 mm x 40 mm at 60 cm centre to centre and french polishing (without skirting) etc complete.

51

BDT

Providing and fixing partitions with 6 mm thick Indian teak veneers on one side including C.T. wood frame work 80 mm x 40 mm at 60 cm C/C and french polishing without skirting etc complete.

127


Completed Labour

SR.NO. & CODE

NO.



128


Completed Labour

SR.NO. & CODE

NO.


Sq.m 1440.00 184.00

Sq.m 1630.00 257.00

52 BDT

79

Providing and fixing partitions using 2.1 metre height and 12 mm thick three layered flat pressed veneered teak wood particle board, exterior grade, bonded with BWP type phenol formaldehyde synthetic resin conforming to I.S.12893-1990 with commercial veneers on both side including Aluminium frame and verticals of size of 65 mm x 40 mm in a pannels of 1.20 m etc. complete. (As per detailed drawing) (Sample to be got approved from Ex. Engineer before use)


53

BDT

83

Providing and fixing partitions of 4mm thick Indian teak veneers on one side and 4 mm. commercial type plywood on the other side including C.T.W. frame of 70 mm x 35 mm. at 60 cm. C/C including finishing with french polishing to veneer face and oil painting/french polishing other face etc. (as per detailed drawing) complete. (without skirting)


129


Completed Labour

SR.NO. & CODE

NO.


54 Sq.m 2340.00 352.00

2210.00 352.00

55 Sq.m 2600.00 292.00

Sq.m 2460.00 292.00

a) Providing, supplying and fixing in position anodised extruded aluminium partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40mm x 65 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to I.S.12823-1990, laminated on both sides, Novateak or equivalent and 5 mm thick selected quality float glass pannels fixed with aluminium glass clips 12 mm x 12 mm and rubber cushioning beading to glass partition as per approved drawing etc. complete. (Sample to be got approved from Ex. Engineer before use)

b) For powder coating extruded aluminium partitions


a)Providing, supplying and fixing in position anodised extruded alluminium partitions with both sides laminated panels having frame made out of aluminium extruded tubular section of size 40 mm x 65 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to I.S.12823-1990, laminated on both sides, Novateak or equivalent fixed with aluminium glazing clips of size 12mm x 12 mm as per approved drawing etc. complete.(Sample to be got approved from Ex. Engineer before use)


130


Completed Labour

SR.NO. & CODE

NO.



131


Completed Labour

SR.NO. & CODE

NO.


56 Sq.m 2515.00 352.00

Sq.m 2370.00 352.00

Sq.m 525.00 65.00

b) For 20 B.W.G. Sq.m 575.00 65.00

Sq.m 245.00 58.00

a) Providing and fixing in position anodised extruded alluminium partition having frame made out of aluminium extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to I.S.12823-1990, laminated on both sides, Novateak or equivalent, Laminated 5 mm thick selected quality of glass pannels fixed with aluminium glazing clips 12mm x 12mm (conical) rubber cushioning to glass as per detailed drawings etc. complete.(Sample to be got approved from Ex.Engineer before use)



57

BDT

93

a) Providing and fixing 22 B.W.G. plain G.I. sheets on top of weather shed including scaffolding, fixing by means of nuts and bolts or as directed or as per detailed drawing complete. (Brackets of 70 mm x 45 mm to be paid seperately)


58 BDT

94

Providing and fixing 4 mm thick plain A.C. sheets on top of the weather shed including scaffolding, fixing by means of nuts and bolts or as directed etc. complete as per detailed drawing (Brackets of 70 mm x 45 mm to be paid seperately).

132


Completed Labour

SR.NO. & CODE

NO.



133


Completed Labour

SR.NO. & CODE

NO.


Sq.m 550.00 58.00

b) For Frosted Glass Sq.m 590.00 58.00

60 Sq.m 580.00 52.00

61 Sq.m 1141.00 294.00

59

BDT

a) Providing and fixing clear glass panels 5.5 mm thick for all size including putty, C.T. beading etc. complete.


Providing and fixing UV proof plastic sheet panels of approved quality in required thickness of 3 mm plain, clear or any colour or obscured (lining) in lieu of glass panes to doors/windows including providing and fixing clips, putty etc. complete. (Sample to be got approved from Ex.Engineer before use)


Providing and fixing GYP board material stud single layer partition 97.00 mm thick using single board of 12.5 mm thick on each side of 34/76/36 mm studs fixed to floor and ceiling channel 70/32 mm at every 610 mm regular interval horizontally including finishing the joints with jointing compounds, paper tape and two coats of primer paint etc complete.


134


Completed Labour

SR.NO. & CODE

NO.


62 Sq.m 3640.00 294.00

63 Sq.m 930.00 36.00

b) For 3.00 mm thickness Sq.m 1210.00 51.00

64 Sq.m 1630.00 220.00

Providing and fixing alluminium grill decorative of various sizes as per detail drawing and specification etc. complete. (Prior permission to be obtained from S.E. before execution of this item)


a) Providing and fixing acrylic plastic sheet panels of approved quality in required thickness 2 mm plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete.


Providing and fixing of approved make wall panelling of approved design and colour made out of extruded rigid PVC double wall construction with multichamber hollow plastic section SPUF-141, 142, 143 of size 10 mm x 150 mm on the grid horizontal, vertical aluminum pipe section 25 mm x 25 mm as required plastic section will be fixed with concealled screws on frame work, corner supported with PVC "L" section and no screws shall be visible.


135


Completed Labour

SR.NO. & CODE

NO.


Cu.m 92000.00 11700.00


Sq.m 2600.00 587.00

Sq.m 4730.00 1027.00

Spec.No.: Bd.T.4/Page No. 479

65

BDT 2

Providing and fixing country teak wood frame 60 mm x 100 mm for second class doors with/without ventilator windows and wondows fan light and clear storey windows including all mouldings, chamfering, rounding, and abauting holdfasts and finishing with one coat of primer etc. complete.(Only for exterior doors)

66

BDT

4

Providing and Fixing C.T.W. 2nd class fully glazed ventilator rectangular in shape as per detailed drawing including iron oxdized fixtures and fastenings and finishing the wood work with one coat of primer etc. (without M.S. bar and frame) complete.(Only for exterior windows) (Prior permission of S.E.to be obtained for inclusion of this item in estimate.)


67 BDT

4A

Providing and Fixing C.T.W. 2nd class fully glazed ventilator rectangular in shape as per detailed drawing including iron oxidized fixtures and fastenings and finishing the wood work with one coat of primer etc. (with mild steel bars and frame) complete.

136


Completed Labour

SR.NO. & CODE

NO.


Sq.m 3210.00 881.00


Sq.m 2770.00 734.00


Sq.m 2880.00 807.00

Spec.No.: Bd. T. 23/ Page No. 494

68

BDT 11

Providing and fixing country teak wood double leaf, 2nd class partly panelled and partly glazed door without fanlight/ ventilator as per drawings including iron oxidised fixtures and fastenings and finishing the wood work with one coat of primer etc. (excluding door frame) complete.

69

BDT 12

Providing and fixing country teak wood single leaf, 2nd class partly panelled and partly glazed door without fan light / ventilator as per drawings including iron oxidised fixtures and fastenings and finishing the wood work with one coat of primer etc.(excluding door frame) complete.

70 BDT

23

Providing and fixing country teak wood double leaf 2nd class 20mm thick false panelled door without fanlight as per detailed drawings including iron oxidised fixtures and finishing with one coat of primer etc.(excluding door frame) complete.

137


Completed Labour

SR.NO. & CODE

NO.


Sq.m 2770.00 734.00


a) Sq.m 3930.00 661.00

b) Sq.m 4120.00 661.00

71 BDT 24

Providing and fixing country teak wood single leaf, 2nd class 20 mm thick false panelled door without ventilator as per detailed drawings including iron oxidised fixtures and fastenings and finishing the wood work with one coat of primer (excluding door frame) etc. complete.

72 BDT

127A

Providing and fixing double leaf panelled door C.C.T.W. 60 mm x 100 mm frame with ventilator, shutters 32 to 35 mm thick as per detailed drawings consisting of C.C.T.W. vertical styles and top rail 100 mm x 35 mm and lock and bottom rail 200mm x 35 mm including Iron oxidised fixtures and fastenings and T.W. beading at junctions of panels, inserted including three coats of oil painting complete. (Sample to be got approved from Ex.Engineer before use)

Panels of 12 mm thick 3 layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin with commercial veneers on both sides (conforming to I.S. 3097-1980) Novateak or equivalent

Panels of 12 mm thick, exterior grade prelaminated paticle board laminated on both side.


138


Completed Labour

SR.NO. & CODE

NO.


a) Sq.m 3270.00 562.00

b) Sq.m 3830.00 587.00

Sq.m 2980.00 793.00


73 BDT 127B

Providing and fixing single leaf panelled door C.C.T.W. 60 mm x 100 mm frame with ventilator, shutters 32 to 35 mm thick as per detailed drawings consisting of C.C.T.W. vertical styles and top rail 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm including Iron oxidized fixtures and fastenings and T.W. beading at junctions of panels inserted including three coats of oil painting complete. (Sample to be got approved from Ex.Engineer before use)

Panels of 12 mm thick 3 layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin with commercial veneers on both sides (conforming to I.S. 3097-1980) Novateak or equivalent

Panels of 12 mm thick, exterior grade prelaminated paticle board laminated on both side.


74

BDT 42

Providing and fixing country teak wood 25 mm thick double leaf second class window with plain/ obscured glazed shutters without ventilator or fanlight as per detailed drawings including iron oxidised fixtures and fastenings stoppers and finishing the wood work with one coat of primer (excluding window frame) complete.

139


Completed Labour

SR.NO. & CODE

NO.


75 Sq.m 2600.00 316.00


Providing and fixing 30mm thick factory made PVC rigid foam panelled door shutters made of MS tube 19 guage thickness size 19mm x 19 mm for styles and 15 mm x 15 mm for top and bottom rails, covered with heat moulded PVC "C" channel of 5 mm thick sheet and 30 mm x 75 mm wide to form styles and 5 mm thick and 100 mm wide PVC sheet for top rail, lock rail and bottom rail on either sides and 5 mm thick 20 mm wide cross PVC sheet as gap inserted for top rail and bottom rail, panelling of 5 mm thick, PVC sheet fitted in MS frame welded / seal to the style and rails with 5 mm x 30 mm PVC sheet beading on either side joint together with solvent cement adhesive etc. complete

as per manufacturer's specification and direction of Engineer-In-Charge fixed to the frames with stainless steel hinges of 75 mm size aluminium tower bolt 100 mm size aluminium aldrop 250 mm size handles 100 mm size including all material, labour, machinery etc complete. ( For WC / Bath Shutters )( the item is exclusive of door frame.)

140


Completed Labour

SR.NO. & CODE

NO.


76 Sq.m 1100.00 140.00


77 Sq.m 3640.00 753.00

b) For powder coated aluminium doors Sq.m 3600.00 753.00

Providing and fixing factory made PVC door frame of approved make of size 50 mm x 45 mm with a wall thickness of 5 mm made out of extruded 5 mm rigid PVC foam sheet mitred at corners and joined with 2 nos of 150 mm long bracket of 15 mm x 15 mm M.S. square tube the vertical door profiles to be reinforced with 19 mm x 19 mm M.S. square tube of 19 guage EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using M.S. screws of 65 / 100 mm size complete as per manufacturer's specification and direction of Engineer-In-Charge.

Providing and fixing in position anodised powder coated alluminium double leaf panneled door with fan light mounted on floor spring, outer frame of size 100 mm. X 45 mm.of average thickness 2 mm. and weight 1.608 Kg. Per Rmt., Mechanically assembled at corner with shutter styles of size 50 mm. x 45 mm. x 2.82 mm. @ 1.351 Kg./ Rmt. top rail 50 mm. x 45 m. x 2.82 mm. @ 1.351 Kg./Rmt. lock rail and bottom rail 150 mm. x 45 mm. x 2.2 mm. at 2.376 Kg.Rmt. glazing clips 19 mm. x 17.8 mm. x 0.9 mm. @ 0.124 Kg./Rmt. with 1.5 mm. PVC SHEET , all fixtures and fastening , handles, tower bolt, lock, door stopper, rubber gasket etc. complete.

Spec.No.: As ddirected by Engineer incharge

141


Completed Labour

SR.NO. & CODE

NO.


78 Sq.m 4880.00 1189.00

b) For powder coated aluminium doors Sq.m 4755.00 1189.00

79 Sq.m 2690.00 646.00

a) Providing and fixing in position anodised alluminium double leaf panneled door with fan light mounted on floor spring, outer frame of size 100 mm. X 45 mm. of average thickness 2mm. and weight 1.608 Kg. Per Rmt. mechanically assembled at corner with shtter styles of size 50 mm. x 45 mm. x 2.82 mm. @ 1.351 Kg/Rmt. top rail 50mm.x 45 mm. x 2.82 mm. @ 1.351 Kg./Rmt. lock rail and bottom rail 150 mm. x 45 mm. x 2.2 mm. @ 2.376 Kg/Rmt. glazing clips 19 mm. x 17.8 mm x 0.9 mm. @ 0.124 Kg./Rmt. with 5 mm. float glass, all fixtures and fastening, handles, tower bolt, lock, door stopper, rubber gasket etc. complete.

Spec. No. : As directed by Engineer incharge

Providing and fixing FRP ( Fiber reinforced plastic) Door with shutter 25 to 30 mm. Thick having properties such as water proof resistant to termite resistant to mild acids and chemical. The thickness of FRP shold of of 1.5 mm.With extra reinforcement to sides, edges, recess for alluminium fixtures and fastenings and commercial types as per the approved design, including alluminium , fixtures and fastenings and two coats of synthetic acrylic emulsion paint etc. complete (Excluding door frame)

Spec.No.: As ddirected by Engineer incharge

142


Completed Labour

SR.NO. & CODE

NO.


80 Sq.m 670.00 81.00

Spec.No.: As directed by Engineer incharge.

81 Sq.m 930.00 195.00

82 Sq.m 4550.00 1468.00

Providing and fixing FRP (Fiber reinforced plastic) glass sheet of 1.75 mm. To 2.00 mm. Thick in any colour for all sizes in windows including, putty, C.T. bedding, having properties such as water proof resistant to termite, resistant to mild acids and chemical as per the approved design etc. complete.

Providing and fixing solid core flush door in single leaf 32mm thick commercial type of exterior grade as per detail drawing approved commercial plywood facing on both side without glazing and ventians all necessary beads moulding and lipping, iron oxidised fixtures and fastening handles on both side and finish with one coat of primer completed(without frame).

Providing interior and exterior to the door shutter with 6mm thick approved ply on both side and covering with approved red cedar veneer from both side, edges to be leaped with 50mm x 12mm C.T.W. beading & providing VTC decorative moulding of size 1 1/2"x 1" from both side and refixing the door shutter with heavy type brassof fixtures, fittings four no of brass hinges ,one imported lock ,heavy door closure etc. including finishing the door shutter with approved shade melamine polish as per instructions and drawing of Chief Architect to Govenment and Engineer incharge.

(Prior permission of S.E. is necessary before inclusion of item in estimate.).

143


Completed Labour

SR.NO. & CODE

NO.


83 Sq.m 3400.00 445.00

b) 32 mm thick Sq.m 3170.00 445.00

a)Providing & fixing ISI make commercial grade factory made hot pressed,phenol bonded solid core flush door in single leaf 35 mm thick,of exterior grade as per detailed drawings conforminf to I.S. 2202-1962 (Revised) with 0.8 mm thick matt finish lamination on both faces including Indian teak wood frame,stainless steel matt finish fixtures & fastenings,worth iron holdfasts with brass mortise lock,with french polish at sides,waxing etc.complete(without door frame).(Sample to be got approved from Ex.Engineer before use).

Spec.No.: As directed by Engineer incharge

136

BD - U : IRON WORKDESCRIPTION OF ITEMS UNIT

Completed Labour

a) --------- do ---------- 20 Kg/Sqm. Sq.m 1170.00 159.00

b) --------- do ---------- 25 Kg/Sqm. Sq.m 1410.00 214.00

Spec.No.: Bd.U.1/Page No.537

a) --------- do ---------- 20 Kg/Sqm. Sq.m 1828.00 170.00

b) --------- do ---------- 25 Kg/Sqm. Sq.m 2065.00 227.00

c) --------- do ---------- 30 Kg/Sqm. Sq.m 2310.00 243.00

d) --------- do ---------- 35 Kg/Sqm. Sq.m 2550.00 257.00

SR.NO. & CODE

NO.


1

BDU 1A

Providing and fixing mild steel grill work for windows, ventilators, etc. required kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

2 BDU

1A

Providing and fixing mild steel grill railing required kg/Sqm. with teak wood hand rail of size 75 mm x 60 mm and sill of 75 mm x 25 mm and newel posts for staircases, including fabricating, fixtures, erecting, the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colours and polishing the sill, hand rail and the newel post with french polish.

137


Completed Labour

SR.NO. & CODE

NO.


Spec.No.: Bd.U.1/Page No.537

138


Completed Labour

SR.NO. & CODE

NO.


3

a) --------- do ---------- 20 Kg/Sqm. Sq.m 1380.00 200.00

b) --------- do ---------- 25 Kg/Sqm. Sq.m 1620.00 210.00

c) --------- do ---------- 30 Kg/Sqm. Sq.m 1865.00 220.00

d)--------- do ---------- 35 Kg/Sqm. Sq.m 2110.00 228.00

4

a) --------- do ---------- 20 Kg/Sqm. Sq.m 1375.00 214.00

b) --------- do ---------- 25 Kg/Sqm. Sq.m 1640.00 235.00

Providing and fixing mild steel grill railing weighing required kg/Sqm. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anitcorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete.


Providing and fixing mild steel grill work railing required kg/Sqm. of rectangular hollow sections with PVC handrail covering as per drawing including newel posts for staircases, drilling holes in concrete/other surface,fabricating, fixtures, erecting grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking good the damaged surface, cleaning etc. complete.


139


Completed Labour

SR.NO. & CODE

NO.


5 Sq.m 2090.00 220.00

6

a) --------- do ---------- 20 Kg/Sqm. Sq.m 1290.00

b) --------- do ---------- 25 Kg/Sqm. Sq.m 1580.00

Providing & Fixing stainless steel railing with top and vertical pipe of 50mm dia at 0.90 m c/c or as required and horizontal pipes of 25mm dia in two rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above one major post etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)


Providing & Fixing mild steelgrill railing of required kg/Sqm. with 50mm dia. MS Pipe hand rail & sill of 25mm x 3mm & newel posts for staircases, including fabricating, fixtures, erecting the grill work with one coat of anticorrossive paint & two coats of oil painting of approved colours to the sill, hand rail and the newel post.


139

BD - V : WATER SUPPLY AND SANITARY FITTINGSDESCRIPTION OF ITEMS UNIT

Completed Labour

1 Ltr. 6.20 1.20

2 Ltr. 6.50 1.20

SR.NO.

& CODE NO.


Providing, hoisting and fixing in position of approved make high density polyethylene UV stabilized conforming to I.S.12701, water storage tank with necessary connections, testing etc. complete. (Prior approval of sample by Ex. Engineer is necessary before use.)


Providing, hoisting and fixing in position of approved make high density polyethylene UV stabilized conforming to I.S.12701, water storage tank with a protection antifungle white coating from inside with necessary connections, testing etc. complete. (Prior approval of sample by Ex. Engineer is necessary before use.)

Spec.No.: As directed by Engineer-in-charge.

140


Completed Labour

SR.NO.

& CODE NO.


(i) 15 mm dia. Rmt. 225.00 44.00

(ii) 20 mm dia. Rmt. 260.00 44.00

(iii) 25 mm dia. Rmt. 305.00 44.00

(iv) 32 mm dia. Rmt. 333.00 47.00

(v) 40 mm dia. Rmt. 400.00 47.00

(vi) 50 mm dia. Rmt. 520.00 47.00

(vii) 75/80 mm dia. Rmt. 800.00 52.00

(viii) 100 mm dia. Rmt. 1100.00 52.00

Spec.No.: Bd.V.5/Page No.551

3

BDV 5A1

Providing and laying in trenches medium grade (type) galvanised iron pipe having embossed ISI Mark on it, of required diameter with screwed, sockets, joints, necessary galvanised iron fittings such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps etc. including necessary excavation, back filling, fixing with clamps, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

141


Completed Labour

SR.NO.

& CODE NO.


(i) 15 mm dia. Rmt. 200.00 36.00

(ii) 20 mm dia. Rmt. 240.00 36.00

(iii) 25 mm dia. Rmt. 280.00 36.00

(iv) 32 mm dia. Rmt. 310.00 40.00

(v) 40 mm dia. Rmt. 375.00 40.00

(vi) 50 mm dia. Rmt. 495.00 40.00

(vii) 80 mm dia. Rmt. 750.00 43.00


4

BDV

5

Providing and fixing on walls/ ceiling/floors, medium grade G.I. pipe (type) having embossed ISI Mark on it, of required diameter with screwed sockets, joints, necessary galvanised iron fittings such as sockets,back nuts,elbows, bends, tees, reducers, enlargers, plugs, clamps etc.including necessary drilling holes in walls, slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and providing and applying anticorrosive primer and two coats of oil painting, testing, etc.complete.(Prior approval of sample by Ex.Engineer is necessary before use.)

142


Completed Labour

SR.NO.

& CODE NO.


(i) 15 mm dia. Rmt. 73.00 32.00

(ii) 20 mm dia. Rmt. 92.00 32.00

(iii) 25 mm dia. Rmt. 101.00 32.00

(iv) 32 mm dia. Rmt. 128.00 32.00

(v) 40 mm dia. Rmt. 160.00 34.00

(vi) 50 mm dia. Rmt. 185.00 34.00

(vii) 63 mm dia. Rmt. 230.00 34.00

No. 204.00 25.00


5

BDV 60A

Providing and fixing in position ultra violet stabilised UPVC plumbing pipe of specified outer diameter of required standard thickness conforming to I.S. 4985 including necessary fittings conforming to I.S. 7834 such as PVC bends, tees, reducers, clamps, plugs etc. including necessary excavation trench filling, necessary drilling holes in walls, slabs etc. and making good the surface complete.(For 10 kg/Sq.cm Pressure) (Prior approval of sample and brand by Ex.Engineer is necessary before use.


6

BDV

8

Providing and fixing 15 mm dia. Screw down bib/stop tap of brass including necessary sockets, union nut, testing etc. complete.(Prior approval of sample and brand by Ex. Engineer is necessary before use.)

143


Completed Labour

SR.NO.

& CODE NO.


(a) Bib cock Standard No. 172.00 21.00

(b) Bib cock Fancy No. 288.00 22.00

(c )Bib cock Long body No. 308.00 21.00

(d) Bib cock piller cock No. 305.00 22.00


No. 340.00 29.00


No. 375.00 29.00


7 BDV

Providing and fixing 15 mm dia. Screw down bib cock of symet type including necessary sockets, union nut, testing etc. complete. (Prior approval of sample by Ex.Engineer is necessary before use.)

8 BDV

8A

Providing and fixing 20 mm dia screw down bib/stop tap of brass including necessary sockets, union nut, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

9 BDV 8B

Providing and fixing 25 mm dia. Screw down bib/stop tap of brass including necessary sockets, union nut, testing etc. complete.(Prior approval of sample and brand by Ex. Engineer is necessary before use.)

144


Completed Labour

SR.NO.

& CODE NO.


No. 275.00 22.00


(a) Stop cock 15 mm (Male/Female) No. 185.00 22.00

(b) Angle Stop cock 15 mm No. 200.00 21.00

(c )Conceal Stop cock 15 mm No. 253.00 21.00

(d) Stop cock 20 mm (Female) No. 213.00 21.00

(e) Conceal Stop cock 20 mm No 272.00 21.00

10 BDV

Providing and fixing screw down 15 mm dia wheeled stop tap of brass including necessary sockets, union nut, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

11

BDV 9

Providing and fixing stop cock of symet type of specified dia. including necessary sockets, union nut testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)


145


Completed Labour

SR.NO.

& CODE NO.


a) 20 mm dia No. 357.00 28.00

b) 25 mm dia No. 426.00 28.00

c) 32 mm dia No. 526.00 28.00

d) 40 mm dia No. 615.00 33.00

e) 50 mm dia No. 980.00 33.00

f) 65 mm dia No. 1475.00 39.00

g) 80 mm dia No. 2250.00 39.00


No. 280.00 23.00

No. 160.00 21.00


12

BDV

Providing and fixing screw down required dia. wheeled stop tap of brass including necessary sockets, union nut, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

13 BDV

12

Providing and fixing 100 mm dia. Chromium plated brass showers rose to 15 mm dia. Supply pipe including necessary bend and socket, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

(a) ------ do ------ Swivelling in symet shower

146


Completed Labour

SR.NO.

& CODE NO.


No. 176.00 20.00

Spec.No.: Bd.V.14./Page No.557

(a) 15 mm dia. No. 157.00 23.00

(b) 15 mm dia. push cock with nipple No. 180.00 23.00

( c) 20 mm dia. No. 186.00 23.00

No. 253.00 23.00


14

BDV 14

Providing and fixing 15 mm diameter concussion push button type brass/ gun metal self closing tap including necessary socket, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

15

BDV

Providing and fixing push cock (Self closing tap) symet type of specified diameter including necessary socket, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


16

BDV

Providing and fixing 25 mm diameter concussion push button type brass/ gun metal self-closing tap including necessary socket, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

147


Completed Labour

SR.NO.

& CODE NO.


No. 1620.00 345.00


18 Each 2380.00 418.00

No. 168.00 35.00

17 BDV

Providing and fixing fittings and accessories such as ball cock, over flow pipe with mosquito proof coupling, scour pipe with plug, manhole with cover and locking arrangement, connecting pipes and embedding intake and outflow pipes into the R.C.C. water reservoir

Providing and fixing chromium plated wall mixer cock of heavy duty without washer with chromium plated showers with/without telephonic arrangement including necessary supply pipes 15 mm dia. and fittings like socket union, nuts, bends, valves, reducers, including necessary drilling holes in walls, slabs etc and remaking good the demolished portion to restore the same in original condition neatly and cleaning the site after completion of work, testing etc. complete. (S.E.'s permission to be obtained before execution of this item) (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


19 BDV 84

Providing and fixing 12 mm dia. Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement, testing etc. complete.(Prior approval of sample and brand by Ex.Engineer is necessary before use.)


148


Completed Labour

SR.NO.

& CODE NO.


No. 478.00 37.00

No. 3450.00 587.00

No. 2925.00 477.00

20 BDV 83

Providing and fixing 40 mm dia. Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


21

BDV 74

Providing and fixing 1st class white glazed earthenware "Orissa type" W.C.Pan 600 x 400 mm size including 'P'or 'S'trap UPVC soil and vent pipe upto the outside face of the wall, 1:5:10 cement concrete bedding, 10 litre fibre high level flushing cistern with fittings, inlet pipe with stop tap, bracket for fixing the cistern, 32 mm dia. UPVC flush pipe with fitting and clamps, 20 mm dia. UPVC over flow pipe with mosquito proof coupling, chain and pulley, painting of the exposed pipe and cutting and making good walls and floor, testing etc. complete.(Prior approval of sample and brand by Ex.Engineer is necessary before use.)

(a)….. Do …… without flushing cistern with flush cock and necessary fittings


149


Completed Labour

SR.NO.

& CODE NO.


No. 3620.00 529.00

No. 3160.00 448.00

22

BDV

77

Providing and fixing 1st class "Orissa Type" Colour Glazed earthenware 600 x 400 mm. W.C. PAN including `P' or `S' trap, UPVC soil and vent pipe upto the out side face of wall, including 100 mm dia. UPVC plug bend, 10 litre UPVC high level flushing cistern with fittings, inlet pipe with stop tap, brackets, 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm dia. UPVC over flow pipe with mosquito proof coupling, UPVC chain and pulley, painting to cistern and exposed pipes, cutting and making good to the walls and floors, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

(a) ----- do ------ without flushing cistern with flush cock and necessary fittings.


150


Completed Labour

SR.NO.

& CODE NO.


No. 3150.00 421.0023 BDV

57

a) Providing and fixing European type white glazed earthenware W.C.PAN with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe upto the outside face of wall, 10 litre enamelled low level flushing cistern with fittings, pipe and stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm dia. UPVC overflow pipe, mosquito proof couplings, G.I. chain and pulley, cutting and making good to the walls and floors, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

151


Completed Labour

SR.NO.

& CODE NO.


No. 3450.00 442.00

No. 2690.00 374.00

No. 3000.00 403.00

No 3250.00 440.00

No. 3550.00 464.00

No. 3240.00 371.00

No. 3230.00 404.00


(b) ------ do ------- with water jet and fittings

(c) ------ do ------- without flushing cistern with flush cock and necessary fittings

(d) ------ do ------- without flushing cistern with flush cock and water jet and fittings


24 BDV

56

a) Providing and fixing European type white glazed earthenware W.C. Pan with UPVC seat and lid with chromium plated brass hinges and rubber buffer including UPVC, soil and vent pipe up to the outside face of the wall and 100 mm dia. UPVC plug bend, 10 litres UPVC low level flushing cistern 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm dia. UPVC overflow pipe with mosquito proof coupling chain and pulley, painting of the cistern and exposed pipe and cutting and making good to the walls and floors, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)


(c) -------- do ------ Without Flushing tank with flush cock and necessary fittings.


152


Completed Labour

SR.NO.

& CODE NO.


No. 3350.00 440.00

No. 3660.00 464.00

No. 3080.00 371.00

No. 3380.00 404.00

25

BDV

21

a)Providing and fixing European type coloured glazed earthenware W.C PAN with Bekelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC soil and vent pipe upto the outside face of wall, 10 litre UPVC high level TANK flushing cistern, 32 mm. Dia. UPVC flush pipe with fittings, and clamps 20 mm dia. UPVC over flow pipe with mosquito proof couplings, painting to exposed pipe and cutting and making good to the wall and floor, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


(c) -------- do ------ Without Flushing cistern with flush cock and necessary fittings.



153


Completed Labour

SR.NO.

& CODE NO.


No. 3230.00 404.00

No. 3560.00 428.00

No. 2885.00 340.00

No. 3190.00 367.00

26 BDV

75

a)Providing and fixing European type white glazed earthernware water closet with syphonic trap with syphonic low level 10 litres UPVC cistern with UPVC seat and lid with chromium plated brass hinges including UPVC soil and vent pipe upto the outside face of the wall including 100 mm dia. UPVC plug bend, inlet pipe, stop tap etc. all fittings, cutting and making good to the walls and floor, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


(c) -------- do ------ Without Flushing cistern with flush cock and necessary fittings.



154


Completed Labour

SR.NO.

& CODE NO.


No. 3660.00 432.00

No. 3310.00 394.00

No. 4450.00 394.00


27 BDV 76

Providing and fixing anglo Indian type white earthenware W.C.Pan with UPVC seat and lid with chromium plated brass hinges including UPVC soil and vent pipe upto the outside face of the wall and 100 mm dia. UPVC plug bend, 10 litre UPVC high level flushing cistern, 32 mm dia. PVC flush pipe with fittings and clamps,20 mm dia. PVC over flow pipe with mosquito proof coupling, G.I.chain and pulley painting of cistern and exposed pipe and cutting and making good to the walls and floor, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

(a) -------- do ------ Without Flushing cistern with flush cock and necessary fittings.


28

BDV

23

Providing and fixing white glazed earthenware full stall type Urinal without cistern, stop tap with inlet pipes and 32 mm dia. UPVC flush pipe, with fitting and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto the outside face of the wall, making good to damaged surface testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

155


Completed Labour

SR.NO.

& CODE NO.


No. 4500.00 394.00


No. 2200.00 293.00

No. 1460.00 323.00

29

BDV

23A

Providing and fixing coloured glazed earthenware full stall type Urinal without flushing cistern with inlet pipes, UPVC flush pipe, stop tap 32 mm dia. With fittings, UPVC soil pipe, UPVC trap and soil pipe connection upto the outside face of the wall, making good to damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

30

BDV 110

Providing and fixing white glazed earthenware semi stall type urinals without cistern, with inlet pipes stop tap, UPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


31

BDV

111

Providing and fixing white glazed porcelene ware lipped flat back or corner type urinals without flushing cistern, including glazed soil inlet pipes lead trap connection , UPVC flush pipe with fittings and flushing arrangement, including PVC soil pipe, UPVC trap and soil pipe connection upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


156


Completed Labour

SR.NO.

& CODE NO.


No. 2060.00 323.00


No. 1840.00 220.00


32 BDV

24

Providing and fixing white glazed earthenware urinal squatting type without cistern with fitting, inlet pipes, stop tap, 32 mm dia. UPVC flush pipe with fittings and spreader arrangement including UPVC soil pipe, UPVC trap, soil pipe connection upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

33

BDV 26

Providing and fixing white glazed earthenware lipped flat back corner type Urinal without flushing cistern, inlet pipe with stop tap, 32mm diameter UPVC pipe with fittings, including UPVC soil pipe, trap and soil pipe connection upto the outside face of wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

157


Completed Labour

SR.NO.

& CODE NO.


No. 2350.00 323.00

Spec.No.: Bd.V. 28/Page No. 565

Rmt. 115.00 27.00


No. 1890.00 191.00

a) With cold and hot water piller tap No. 2220.00 205.00


34 BDV

28

Providing and fixing a group of two white glazed earthenware lipped flat back type Urinal without flushing cistern, with inlet pipe and stop tap, UPVC flush pipe with fittings including UPVC soil pipe, UPVC trap and soil pipe connections upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

35

BDV 29

Providing and laying 100 mm dia. half round white glazed earthenware pipes in 1:5:10 cement concrete bedding including bends, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

36

BDV 30B

Providing and fixing white glazed earthenware Wash Hand Basin of size 45 cm x 30 cm including cold water piller tap, brackets, rubber plugs and brass chain, stop tap, chromium plated bottle trap and necessary pipe connection including UPVC waste pipe and trap up to the out side face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

158


Completed Labour

SR.NO.

& CODE NO.


No. 2100.00 190.00

a)With cold and hot water piller tap No. 2550.00 205.00


No. 2060.00 198.00


Spec.No.: Bd.V.30/Page No. 565

37

BDV 30C

Providing and fixing coloured glazed earthenware Wash Hand Basin of 45cm x 30cm including cold water piller tap, cold and hot water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plated bottle trap and necessary pipe connection including UPVC waste pipe and trap up to the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

38

BDV

30

Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm x 40 cm size including cold water piller tap, brackets, rubber plugs and brass chain, stop tap, chromium plated bottle trap and necessary pipe connections including UPVC waste pipe and trap upto the out side face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

159


Completed Labour

SR.NO.

& CODE NO.


No. 2270.00 205.00



40 Each 10009.00 881.00

39

BDV 30A

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55 cm x 40 cm size including cold water piller tap, brackets, rubber plugs and brass chain, stop tap, chromium plated bottle trap and necessary pipe connection including UPVC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

Providing and fixing moulded counter type wash hand basin including pillar tap, cold and hot water mixer tap, brackets, rubber plug and brass chain, stop tap, and necessary pipe connections including, chromium plated bottle trap, UPVC waste pipe and trap upto out side face of the walls, making good the damaged surface, testing etc. complete. (S.E's prior permission to be obtained before execution of this item.) (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


160


Completed Labour

SR.NO.

& CODE NO.


41 920.00 140.00

No. 1850.00 161.00


Providing and fixing high level 10 Lit capacity PVC cistern with fittings inlet PVC pipe with stop tap, brackets for fixing the cistern, 32 mm dia. PVC flush pipe with fittings and clamps 20 mm dia. PVC overflow pipe with mosquito proof coupling, galvanized iron chain and pulley, painting if ordered to cistern pipe etc. and cutting and making good the damaged walls and testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

Per No.

Spec. No.: As directed by Engineer- in-charge.

42 BDV 31A

Providing and fixing white glazed earthenware sink 450mm x 300mm x 200mm including all connections of the G.I. supply and UPVC waste pipe and trap upto the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap, making good the damaged surface, chromium plated bottle trap, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

161


Completed Labour

SR.NO.

& CODE NO.


No. 2590.00 175.00


No. 2600.00 249.00

Spec.No.: Bd.V.30/Page No. 565

No. 644.00 82.00


43

BDV 31

Providing and fixing white glazed earthenware sink 600 mm x 450 mm x 200 mm including all connections of the G.I. supply and UPVC waste pipe and trap upto the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap, bottle trap, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

44

BDV

30D

Providing and fixing Steel sink of size 600 mm x 450 mm x 250 mm ( 1 mm thick) UPVC waste pipe upto outside face of wall, or upto nahani trap cold water chromium plated screw down bib tap, rubber plug and brass chain, making good the damaged surface, etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

45

BDV 32

Providing and fixing 8 cm C.I. Nahani Trap (long arm) including symet grating, bend, connecting piece of C.I. pipe upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

162


Completed Labour

SR.NO.

& CODE NO.


No. 720.00 110.00


47 No. 220.00 63.00

48 No. 301.00 65.00

46 BDV

Providing and fixing 10cm C.I.Nahani Trap (long arm) including symet grating, bend, connecting piece of C.I.pipe upto the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

Providing and fixing 8 cm. Rigid PVC. Nahani Trap including P.V.C. grating, bend, connecting piece of UPVC pipe up to the outside face of the wall, making good the damaged surface, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


Providing and fixing 10 cm Rigid PVC Nahani Trap including PVC grating, bend, connecting piece of P.V.C.pipe of required diameter, pipe up to the outside face of the wall, making good the holes and repairs, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


163


Completed Labour

SR.NO.

& CODE NO.


No. 715.00 84.00


Rmt. 55.00 16.00

49 BDV 38

Providing and fixing 15 cm x 10 cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including symet grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with R.C.C. lid and Symet grating for the gully trap, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

50

BDV 130

Providing and fixing in position 40 mm. Heavy type alkathene pipe for drainage connections including cutting, boring holes in wood work or masonry if necessary, making connections of pipe to sink and giving test for no leakages, making good the damaged surface etc. complete. (Prior approval of sample by Ex.Engineer is necessary before use.)


164


Completed Labour

SR.NO.

& CODE NO.


(a) 75 mm dia. Pipe Rmt. 180.00 44.00

(b) 100 mm dia. Pipe Rmt. 225.00 76.00

( c)150 mm dia. Pipe Rmt. 250.00 85.00


52

(a) 75 mm dia. Pipe Rmt. 240.00 29.00(b) 110 mm dia. Pipe Rmt. 360.00 31.00(c ) 160 mm dia. Pipe Rmt. 540.00 41.00

51 BDV 36A

Providing and fixing asbestos cement soil / vent / waste pipe of required diameter with necessary fixtures and fittings such as bends, tees, single junction, double junction, slotted vent, offsets on walls or in the ground including filling joints with cement mortar 1:2, painting with red lead oil base coat and two coats of anticorrosive paint including fixing pipes on walls by means of nails, driven through wooden lugs in wooden holder battens, fixed with concrete block and supported on ground floor by C.C. 1:2:4, block of 30 x 30 cm size, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)

165


Completed Labour

SR.NO.

& CODE NO.



166


Completed Labour

SR.NO.

& CODE NO.


53 Rmt. 220.00 30.00

(c ) 225 mm dia. Rmt. 400.00 62.00

(d) 300 mm dia. Rmt. 510.00 76.00


No. 3015.00 396.00

No. 3430.00 455.00

Providing and fixing in position unplasticized poly venyl-chloride (UPVC) ultra voilet rays stabilised 110 mm outer diameter rain water SWR pipe conforming to I.S. 4985 and I.S.13592,including necessary fittings, such as PVC grating, bends, with door, PVC clamps, horse shoes at bottom, rubber ring and making connections water tight with solvent, cement including making holes in masonary concrete redoing the same in C.M. 1:3, curing, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


54

BDV

Providing and Laying concrete pipes of I.S.NP.2 class of required diameter in proper line, level and slope including necessary collars, laying, fixing with collars in cement mortar 1:1 and refilling the trench etc. complete. ( Excluding Excavation )

55 BDV 43

Providing and constructing Brick Masonry Inspection Chamber 60 cm x 45 cm including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, Brick Masonry, plastering from inside and airtight R.C.C. lid with frame fixed in cement concrete, curing, testing etc. complete.

a) WIth Reinforced cement concrete raft in B.C. soil area including cost of reinforcement

167


Completed Labour

SR.NO.

& CODE NO.



168


Completed Labour

SR.NO.

& CODE NO.


No. 4535.00 514.00

No. 5105.00 285.00

Spec.No.: Bd.V.43./Page No.574

No. 4850.00 535.00

No. 5070.00 587.00


58 No. 38.00 5.00

56

BDV 43A

Providing and constructing Brick Masonry Inspection Chamber 90 cm x 45 cm including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels, Brick Masonry, plastering from inside and airtight R.C.C.lid with frame fixed in cement concrete, curing, testing etc. complete.

(a) WIth Reinforced cement concrete raft in B.C. soil area including cost of reinforcement

57 BDV

44

Providing and constructing Brick Masonry intercepting trap Chamber 90cm x 45cm including 1:4:8 C.C. foundation 1:2:4 C.C. channels/salt glazed stoneware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and outside, R.C.C.lid with frame fixed in cement concrete, curing, testing etc. complete.

(a) wIth Reinforced cement concrete raft in B.C. soil area including cost of reinforcement

Providing and fixing in postion unplasticized polyvinyl chloride (UPVC) ultra violet stabilized 110 mm outer diameter cowl dome conforming to I.S.4985 including making joints with solvent cement etc. complete.


169


Completed Labour

SR.NO.

& CODE NO.


No. 490.00 66.00

No. 640.00 81.00

No. 810.00 235.00


Rmt. 303.00 101.00

No. 440.00 28.00

59

BDV

Providing and fixing reinforced cement concrete cover of 7.5cm thick over manhole and inspection chamber including mild steel reinforcement, curing testing etc. complete. (1.15 m x 0.6 m. size) (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


60 BDV

Providing and fixing reinforced cement concrete round cover of 7.5 cm thick over manhole and inspection chamber including mild steel reinforcement etc.complete. (1.25 m dia.) (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


61 BDV

Providing soak pit of size 120 cm x 120 cm x 120 cm including excavating and filling with brick bats as per drawing etc. complete.

62

BDV

Providing effluent channel 1.00 M. x 1.00 M., filling with boulder 6 cm. to 20 cm. Size, hand packing and spreading murum at top etc. complete.


63 BDV

Providing and fixing 450 mm x 550 mm size superior type mirror with 16 mm dia. Nickel plated towel rod etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)


170


Completed Labour

SR.NO.

& CODE NO.


No. 155.00 30.00

No. 102.00 35.00

Rmt. 175.00 63.00

Rmt. 248.00 50.00

64 BDV

Providing and fixing chromium plated towel rod 16 mm dia. And 75cm. in length including all accessories complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)


65 BDV

Providing and fixing Glass Shelf 125 mm. Wide and 600 mm. long with necessary chromium plated brackets, providing T.W. gutties etc. complete.


66 BDV

Providing and fixing 100 mm dia. Salt Glazed Stoneware pipe including fittings such as bends, tees, single junctions, double junctions, laying, jointing (excluding excavation and refilling the trenches) etc. (Cement: 1.87 kg per m)


67 BDV-

39

Providing and fixing 150 mm dia. Salt Glazed Stoneware pipe including fittings such as bends, tees, single junctions, double junctions, laying, jointing (excluding excavation and refilling the trenches) etc.complete (Cement: 2.24 kg per m)


171


Completed Labour

SR.NO.

& CODE NO.


Rmt. 296.00 51.00

Rmt. 870.00 88.00

Spec. No.: BD.V.36 Page No. 571.

Rmt. 725.00 82.00

Spec. No.: BD.V.35 Page No. 571.

68

BD/V-

39

Providing and fixing 225 mm dia. Salt Glazed Stoneware pipe including fittings such as bends, tees, single junctions, double junctions, laying, jointing (excluding excavation and refilling the trenches) etc. (Cement: 4.04 kg per m)


69

BDV 35

Providing and fixing 100 mm. Diameter cast iron centrifuguly spurn soil/ vent/ waste pipes with necessary fixtures and fitting such as bends, tees, single junction, double junction, slotted vent offsets on walls or in the ground including filling joints with lead with read lead oil paint coat and two coats of anticorrosive paint including fixing the pipe on walls by means of nails driven through lugs in wooden holder/battens and supported on ground floor by C.C. 1:2:4 of 30 cm. x 30 cm. size blocks complete.

70 BDV 35A

Providing and fixing 75 mm. Diameter cast iron centrifuguly spurn soil/ vent/ waste pipes with necessary fixtures and fitting such as bends, tees, single junction, double junction, slotted vent offsets on walls or in the ground including excavation, laying, refilling the trench and painting the exposed pipe with oil paint complete.

172


Completed Labour

SR.NO.

& CODE NO.


No. 1250.00 305.00

No. 1320.00 301.00

No. 890.00 55.00

71 BDV

65

Providing and fixing Indian type white glazed earthenware 635 mm water closet pan including 'S' trap with earthenware foot rests, UPVC soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

Spec. No.; As directed by Engineer- in-charge.

72 BDV 66

Providing and fixing Indian type white glazed earthenware 675 mm water closet pan including 'S' trap with earthenware foot rests UPVC soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

Spec. No.: As directed by Engineer in-charge.

73 BDV

Providing and fixing white glazed pedestal for W.H.B. of approved size and quality testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

Spec. No.: As directed by Engineer- in-charge.

173


Completed Labour

SR.NO.

& CODE NO.


No. 970.00 55.00

No. 900.00 734.00

Cum. 200.00 145.00

77 No. 245.00 87.00

74 BDV

Providing and fixing colour glazed pedestal for W.H.B. of approved size and make and quality testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)

Spec.No.: As directed by Engineer-in-charge.

75

Cleaning septic tank upto 1.5 Cu.m. capacity or equivalent testing etc. complete.

Spec. No. : As directed by Engineer- in- charge.

76

Cleaning septic tank more than 1.5 Cu.m. capacity, add for each additional Cu.m. capacity.

Spec. No. : As directed by Engineer- in-charge.

Replacement of internal fittings of PVC cisterns including removing old fittings etc. complete.

Spec. No. : As directed by Engineer- in-charge.

171

MISCELLANEOUS(a) GENERAL PEST CONTROL


Completed Labour

1 Sq.m. 15.00 7.00


2 No. 65.00 9.00


3 No. 115.00 7.00


4 Sq.m. 360.00 59.00

SR.NO.

& CODE NO.


Providing general pest control services to the building to control the nuisance of the cockcroaches, lizards, bedbugs and other insects etc. with four operations in a year and monthly check up.

Providing general pest control services to small size inspection chambers to control nuisance of the cockcroaches during the year with monthly check up.

Providing general pest control services to big size inspection chamber to control nuisance of the cockcroaches, etc. complete during years with monthly check up.

Providing and fixing Netlon or equivalant type extruded mosquito proof netting properly cut to the size and stiched with Nylon thread and squarely fixed with 20 mm vetrohood and loop fastening system for removal and refixing complete as per drawing and as directed by Engineer- in - charge. (Prior permission of S.E is necessary before inclusion of item in estimate)

172


172

(b) GUNITINGDESCRIPTION OF ITEMS UNIT

Completed Labour

(i) ------ do ------ 25 mm thick Sq.m 390.00 53.00(ii) ------ do ------ 40 mm thick Sq.m 550.00 70.00(iii) ------ do ------ 50 mm thick Sq.m 660.00 88.00

Spec.No.: Bd.W.2./Page No.582

Sq.m. 935.00 94.00


3 Sq.m. 300.00 35.00

SR.NO.

& CODE

NO.


1 BDW 2A

Guniting by dry mix process as per I.S. 9012 (1978) to ceilings, soffit & sides etc. in C.M. 1:3 proportion with admixture (guniting aid ie microsilica or sifumex-100 D powder) as per specified thickness under pressure 2.1 kg to 2.8 kg per Sq. cm. including forms, scaffolding, curing for 14 days etc. complete. (Excluding welded mesh reinforcement)

2 BDW

43

Guniting by dry mix process as per I.S. 9012 (1978) to ceilings,soffit & sides etc. in C.M. 1:3 proportion with admixture (guniting aid ie microsilica or sifumex-100 D powder) and 50 mm thick under pressure 2.1 kg to 2.8 kg per Sq. cm. including welded mesh of size 75 mm x 75 mm x 10 guage as reinforcement with fixing by anchor bolts with forms, scaffolding, curing for 14 days etc. complete.

Providing and applying approved epoxy resin before guniting to have perfect bond between old concrete or masonry and guniting by nylon brushes scaffolding labour etc. complete.

173


Completed Labour

SR.NO.

& CODE

NO.



4 Sq.m. 200.00 40.00


5 Sq.m 130.00 21.00


6 Sq.m 240.00 29.00


Providing and fixing welded mesh fabric for guniting of mesh size 75 mm x 75 mm and 10 gauge thick including scaffolding etc. complete.

Providing and applying sand blasting to concrete surface to clean all loose,rust,dirt by mechanical means of compressor,blasting gun etc complete.

Providing and applying two coats of anticorrosive epoxy phenolic IPNET RB rebar protective system on exposed reinforcement and concrete penetrating corrosion inhibitor EPCO KP-100 or equivalent over adjoining concrete surface including chipping out loose concrete,cleaning the surface with wire brush etc. complete.

174

(c) FENCING WORKDESCRIPTION OF ITEMS UNIT

Completed Labour

Rmt. 360.00 49.00

Rmt. 350.00 49.00

Spec.No.: Bd.W.3/Page No.583

Sq.m 1410.00 111.00

1700.00 94.00

Spec.No.: Bd.W.6/Page No.585

SR.NO. & CODE

NO.


1 BDW

3A

Providing and erecting 1.2 metre high wire fencing with five rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6mm) at 2.5 m. centre to centre including excavating pits for foundation, fixing posts in cement concrete 1:4:8 of size 45 x 45 x 45 cm., fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete.

(a) ------- " ----------- with precast concrete poles in M-15 concrete.

2 BDW

6A

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of approved colour and shade etc. complete. (weight 18 kg. to 20 kg. Per Sq.m.)


3 BDW

6

Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement welding, revetting with oil painting in three coats of approved colour shade. (Weight of gate 35 kg/Sq.m.)

Sq.m.

175


Completed Labour

SR.NO. & CODE

NO.


4 Rmt. 615.00 58.00


5 Rmt. 570.00 74.00

Providing and erecting 1.20 m. high chain link fencing with chain link having hole size 65 mm x 65 mm supported on M.S.angle post of size 50 mm x 50 mm x 6 mm at 2.40 m c/c including excavating pits for foundation fixing post in C.C. 1:4:8 of size 45 cm x 45 cm x 45 cm fixing chain link with 3.25 mm ( 10 guage ) G.I. wire at top and bottom and with oil paint etc. complete.

Providing and erecting 1.20 mtr high welded square mesh fencing with welded square mesh of 3 mm thick G.I. wire &having hole size 40 mm x 40 mm supported on M.S. angle post of size 50 mm x 50 mm x 6 mm as with M.S. flat of size 40 mm x 5 mm nut bolted with support angle including fixing post in C.C. 1:4:8 block and fastening with welded square mesh painting the exposed structural steel work etc. complete.


176


Completed Labour

SR.NO. & CODE

NO.


6 Rmt. 1450.00 153.00

(a)------ do -------- Excluding B.B. masonary Rmt. 965.00 116.00

Providing and erecting including fabricating 0.90 Mt.high decorative type chain link fencing with panelling made out of M.S. angle 50 mm x 50 mm x 6 mm for frame work with M.S. flat 40 mm x 5 mm welded for fastening chain link with frame angle and chain link mesh of 10 gauge & having hole size 65 mm x 65 mm panelling supported on post made of M.S. flat 50 mm x 6 mm on either side of pannel including fixing posts in C.C. 1:4:8 block and fastening the chain link, painting the exposed structural steel work with oil paint (M.S.flat post to be 1.05 Mtr. in height above ground level), including constructing BB masonary 23 cm thick 0.50 m. in ht. (0.20 m below G.L. and 0.30 m. above G.L.) including cement plaster in C.M.1:5 and colour washing etc. complete.


177

(d) DISMANTALINGDESCRIPTION OF ITEMS UNIT

Completed Labour

Sq.m. 26.00 26.00

Sq.m. 34.00 34.00

Sq.m. 30.00 30.00

4 Sq.m. 16.00 16.00

5 Sq.m. 17.00 17.00

SR.NO. & CODE

NO.


1 BDW

Removing single country tiled roof with battens and stacking the materials as directed with all leads and lifts etc. complete.


2 BDW 8B

Removing double country tiled roof and ridge tiles with ridge and battens and stacking the materials as directed with all leads and lifts, complete including removing wood work below.


3 BDW

8A

Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves boards etc. and stacking the materials as directed with all leads and lifts complete. Including removing wood work below.


Removing and resetting Manglore tiles from roof including refixing loose battens.


Removing G.I. and A.C sheet roof covering and stacking them as and where directed in the compound, including scaffolding etc. complete.


178


Completed Labour

SR.NO. & CODE

NO.


6 Sq.m. 22.00 22.00

7 M.T. 710.00 685.00

Cu.m. 590.00 590.00

Sq.m. 14.00 13.00

No. 132.00 125.00

Removing G.I. and A.C sheet roofing including purlins and rafters etc. including sorting out serviceable and unserviceable material and stacking the same as and where directed in the compound, including scaffolding etc. complete.


Removing R.S.girders of any size and span lowering the same and stacking neatly where ever directed in compound,scaffolding etc. complete for all height.


8 BDW

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.


9

BDW

Removing planking from roof or ceiling and stacking them as directed with all leads and lifts etc. complete.


10

BDW

Removing queen post truss from roof and stacking the materials as directed with all leads and lifts etc. complete.

179


Completed Labour

SR.NO. & CODE

NO.


No. 118.00 115.00

No. 98.00 98.00

Sq.m. 26.00 26.00

Sq.m. 7.00 7.00


11

BDW

Removing king post truss from roof and stacking the materials as directed with all leads and lifts etc. complete.


12

BDW

Removing other type truss below 5 M span from roof and stacking the materials as directed with all leads and lifts etc. complete.


13 BDW

Dismantling flat wooden or A.C. sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.


14

BDW

Removing cloth ceiling including frame work and stacking the materials as directed with all leads, lifts etc.complete.


180


Completed Labour

SR.NO. & CODE

NO.


15 Sq.m. 23.00 23.00

Rmt. 2.50 2.50

Sq.m. 1.75 1.75

Rmt. 2.50 2.50

Rmt. 2.50 2.50

Removing the tiles battens and dungree cloth, purlins, rafters, ridges etc. from roof, sorting out serviceable and unserviceable materials and stacking the same as and where directed in the compound scaffolding etc. complete.


16 BDW

Removing battens from roof and stacking them as directed with all leads and lifts etc. complete.


17 BDW

Removing matting from roof and stacking as directed with all leads and lifts etc. complete.


18 BDW

Removing purlins from roof including stacking as directed with all leads, lifts etc. complete.


19

BDW

Removing rafters from roof including the materials as directed with all leads, lifts etc. complete.


181


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 1.20 1.20

No. 58.00 58.00

No. 58.00 58.00

Sq.m. 9.00 9.00

Sq.m. 9.00 9.00

20

BDW

Removing cloth partition with frame work and stacking the materials as directed with all leads, lifts etc. complete.


21 BDW

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.


22

BDW

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.


23 BDW

Removing wooden or A.C. partition including frame work and stacking the material as directed with all leads, lifts etc. complete.


24

BDW

Removing teak wood trellies work with frame including stacking the materials as directed with frame all leads, lifts etc. complete.


182


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 6.20 6.20

Sq.m. 13.00 13.00

Sq.m. 3.50 3.50

Cu.m. 67.00 67.00

Cu.m. 120.00 120.00

Cu.m. 74.00 74.00

25 BDW

Dismantling wooden floor including beams and joists, stacking the materials as directed with all leads, lifts etc. complete.


26 BDW

Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc. complete.


27 BDW

Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc. complete.


28 BDW

Dismantling brick masonry in mud mortar and stacking the materials as directed with all leads, lifts etc. complete.


29 BDW

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete.


30

BDW

Dismantling stone masonry in mud including stacking the materials as directed with all leads, lifts etc. complete.

183


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 137.00 137.00

Sq.m. 34.00 34.00

Sq.m. 28.00 28.00

Cu.m. 635.00 635.00

Cu.m. 87.00 87.00


31

BDW

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc. complete.


32 BDW

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.


33 BDW

Removing Shahabad or Tandur stones from floor without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.


34 BDW

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc. complete.


35 BDW

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc. complete.

184


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 256.00 256.00

Sq.m. 26.00 26.00

Rmt. 3.50 3.50

Rmt. 5.00 5.00

Rmt. 5.00 5.00


36 BDW 8-1D

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc.complete.


37 BDW

Removing trap stone from floor without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.


38 BDW

Removing wire fencing with wooden post and stacking the material with all leads, lifts etc. complete.


39

BDW

Removing wire fencing with iron/ C.C. fencing posts and stacking the materials as directed with all leads, lifts etc. complete.


40

BDW

Removing iron pipe railing having wooden R.C.C. or C.C. or iron posts and stacking the materials as directed.

185


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 14.00 14.00

Sq.m. 4.60 4.60

No. 40.00 40.00


41 BDO

Removing old paint from steel and other metal surface with flame, cleaning and making the surface even and scaffolding etc. complete.


42

BDO

Removing old paint from steel and other metal surface with hand scrapping, cleaning and making the surface even and scaffolding etc. complete.


43 BDW

15

Removing Urinal Pans or W.H.B. with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside.


186


Completed Labour

SR.NO. & CODE

NO.


No. 88.00 88.00

Sq.m. 1.20 1.20

Sq.m. 7.00 7.00

44

BDW

16

Removing W.C. Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan centre to centre including removing the same carefully and stacking serviceable materials as and where directed including throwing the unserviceable material out side etc complete


45

BDW

16

Scraping out old white wash/colour wash by, brushing and or scraping by sand paper and preparing the wall surface smooth including necessary repairs to scratches etc. complete.


46

BDW

16

Scraping out old white wash/colour wash/distemper by brushing and or scraping by sand paper and preparing the wall surface for applying full putty of approved make to complete surface, scraping with sand paper and making smooth surface to receive further painting coats etc. complete.


187


Completed Labour

SR.NO. & CODE

NO.


(a) For 1 Km. Cu.m. 195.00 --

(b) For 2 Km. Cu.m. 210.00 --

(c ) For 3 Km. Cu.m. 225.00 --

(d) For 4 Km. Cu.m. 240.00 --

(e) For 5 Km. Cu.m. 255.00 --

47

BDW

16

Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. (Including Royalty charges )


187

(e) ANTITERMITE AND PEST CONTROLDESCRIPTION OF ITEMS UNIT

Completed Labour

1 Sq.m 60.00 -

2 Sq.m. 108.00 -

SR.NO. & CODE

NO.


Providing Preconstructional Antitermite treatment by treating the bottom surface and the sides of excavation at the rate of 3 litres of emulsion concentrate of one percent concentration of CHLORPYRIFOC 20% EC, ISI approved conforming (I.S.8944), (i.e by diluting 5 ltr. of chlorpyrifoc 20% EC, with 95 ltr. of water) and spraying by high volume sprayer on one square metre surface area with ten years guarantee bond as per I.S.6313 (Part II 1971)


Providing Preconstruction Antitermite treatment by treating the back fill in immediate contact with foundation at the rate of 5 litres of an emulsion concentrate of one percent concentration of CHLORPYRIFOC 20% EC ISI approved conforming to I.S.8944 per square metre of vertical surface area by high volume sprayer with ten years guarantee bond as per I.S. 6313 (Part II) of 1971.


188


Completed Labour

SR.NO. & CODE

NO.


3 Sq.m. 108.00 -

4 Sq.m. 145.00 -

Providing Preconstructional Anti- termite treatment by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate of one percent concentration of CHLORPYRIFOC 20% EC ISI approved conforming (I.S.8944) to per square metre of surface area by high volume sprayer with ten years guarantee bond as per I.S.- 6313 (Part III) of 1971.


Providing Postconstructional Anti- termite treatment to the soil along the external wall by punching holes of 1.2 to 1.5 cm diametre about 30 to 60 cm deep at 15 cm centre to centre as close to the wall as possible and inject one percent concentration of CHLORPYRIFOC 20% EC ISI approved conforming (I.S.8944)at the rate of 7.5 litre emulsion concrete per square metre and sealing the same with proper filling with two years guarantee bonds as per I.S.6313 (Part III) of 1971.


189


Completed Labour

SR.NO. & CODE

NO.


5 Sq.m. 30.00 -

6 No. 20.00 -

Providing exhaustive Antitermite treatment to the wooden frames by drilling 6 mm holes at four corners or as directed on one side, at downward angle of 45 degree at junction of wood work and masonry and in between, as instructed by Engineer, as per requirement, at the rate of 75 ml of chlorodane of 58 percent emulsion concentrate and filling with putty, etc. with two years guarantee bond as per I.S. – 6313 (Part III) of 1971.


Providing exhaustive Antitermite treatment to the wooden beams by injecting antitermite chemical emulsion at four corners or as directed, on one side at downward angle of 45 degree at wooden joints and masonry and in between as instructed by engineer, as per requirement at the rate of 80 ml of chlorodane of 58 percent emulsion concentrate per joint or more as per requirement and filling with putty, etc. with two years guarantee bond as per I.S.- 6313(Part III) of 1971.


190


Completed Labour

SR.NO. & CODE

NO.


7 No. 8.00 -

8 Rmt. 25.00 -

Providing post constructional exhaustive Antitermite treatment to the sides of flooring by injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole of 6mm diameter drilled at a distance of 30 cm centre to centre or more as per requirement and sealing the same with proper filling with two years guarantee bond as per I.S. 6313 (Part III) of 1971.


Providing post constructional exhaustive Antitermite treatment around the periphery by excavating trenches of 20 cms width and exposing the sides of columns and plinth beams upto a depth of 300 mm by injecting one percent of cholordane emulsion concentrate at the rate of 2.25 litres per running metre or more as per requirement with two years guarantee bond as per I.S.6313 (Part III) of 1971.


191

BR :- BRIDGE WORKDESCRIPTION OF ITEMS UNIT

Completed Labour

Lift upto 1.5 meter Cu.m. 125.00 125.00

above 1.50 meter to 3.00 meter Cu.m. 137.00 137.00


above 6.00 meter Cu.m. 163.00 163.00

Spec.No.: BR.3/Page No.102




3




SR.NO. & CODE

NO.


1 BR

3A1

Excavation for foundation in earth, soils of all types, sand, gravel soft murum etc. including shoring and strutting as necessary and disposing off excavated stuff within lead of 100 m as directed etc. complete.

2 BR 3A2

Excavation for foundation in earth, soils of all types, sand, gravel soft murum etc. for cut off wall including shoring and strutting as necessary and disposing off excavated stuff within a lead of 100 m as directed etc. complete.

Excavation for foundation and raft in marshy soil including shoring and strutting as necessary and disposing off excavated stuff within a lead of 100 m as directed etc. complete.

192


Completed Labour

SR.NO. & CODE

NO.





above 6.00 meter Cu.m. 187.00 187.00

Spec.No: BR.3/Page No.102


Above 1.50 meter to 3.00 meter Cu.m. 179.00 179.00


Above 6.00 meter Cu.m. 199.00 199.00





Above 6.00 meter Cu.m. 314.00 314.00


4 BR

3B

Excavation for foundation in hard murum including shoring and strutting as necessary and disposing off excavated stuff within lead of 100 m as directed etc. complete.

5

BR 3C

Excavation for foundation in hard murum and boulders including shoring and strutting as necessary and disposing off excavated stuff within lead of 100 m as directed etc. complete.

6 BR

3D

Excavation for foundation in soft rock and including shoring and strutting as necessary and disposing off excavated stuff within lead of 100 m as directed etc. complete.

193


Completed Labour

SR.NO. & CODE

NO.


Lift Upto 1.5 meter Cu.m. 397.00 220.00



Above 6.00 meter Cu.m. 426.00 269.00





above 6.00 meter Cu.m. 590.00 514.00


9

A) For Open Foundation.

i) For abutment Cu.m 66.00 to 115.00

ii) For pier Cu.m 105.00 to 770.00

iii) For returns Cu.m up to 62.00

7 BR 3E

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff within a lead of 100 m as directed in hard rock (blasted).

8

BR

3F

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff within a lead of 100 m as directed in hard rock. (chiselled and wedged or line drilled)

Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required.

194


Completed Labour

SR.NO. & CODE

NO.


B) For raft foundation

i) For raft with cut off in Sandy strata Sq.m. 129.00 to 253.00

Sq.m. 103.00 to 180.00

Sq.m. 512.00 to 872.00

C) Apron with curtain walls in

i) All types of strata Sq.m. 62.00 to 133.00

Sq.m. 150.00 to 187.00


Cu.m. 2800.00 483.00

ii) Other strata like B.C. soil, soft moorum etc.

iii) Perennial river / streams in sandy / Non sandy strata in command area of Irrigation project having summer Irrigation

ii) Perennial river / streams in sandy/Non sandy strata in command area of Irrigation project having summer Irrigation .

10 BR

5

Providing and laying in situ C.C.1:3:6 of trap / granite / quartzite / gneiss metal in foundation as levelling course including necessary bailing out water, including plywood/steel form work, steel centering, compaction by vibrating finishing etc. complete. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/ formwork will not be allowed).

Spec.No.: BR5/Page No.105/I.S.456 (2000)

195


Completed Labour

SR.NO. & CODE

NO.


a) For C.C. M-15 grade Cu.m. 3340.00 367.00

b) For C.C. M-20 grade Cu.m. 3550.00 404.00

c) For C.C. M-25 grade Cu.m. 3692.00 415.00

11 BR

5F

Providing and laying in situ C.C.of required grade of trap / granite / quartzite / gneiss metal in foundation including necessary bailing out water, including plywood/steel form work, steel centering and excluding dewatering by pump compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete.(Excluding reinforcement, including cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed)

Spec.No.: BR.5/Page No.105/I.S.456 (2000)

196


Completed Labour

SR.NO. & CODE

NO.


12 Cu.m. 3250.00 367.00




d) For C.C. M-30 grade Cu.m. 4920.00 1217.00

Providing and laying in situ C.C. M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal for annular filling around pier / abutment including necessary bailing out water, excluding dewatering by pump compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.

13 BR

5A

Providing and laying in situ C.C. of required grade of trap / granite / quartzite / gneiss metal for cut off and curtain walls including plywood/steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete.(Excluding reinforcement, including cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. (excluding cost of reinforcement) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

197


Completed Labour

SR.NO. & CODE

NO.


Spec.No: BR.5/Page No.105/I.S.456 (2000)

198


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 2830.00 398.00


14 BR

5E

Providing and laying in situ 1:3:6 cement concrete of trap / granite / quartzite / gneiss metal for levelling coures below R.C.C raft and in foundation including necessary plywood/steel formwork, steel centering, compaction by vibrating finishing, curing etc. complete. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

15 BR 5C

Providing and laying in situ cement concrete of required grade of trap / granite / quartzite / gneiss metal for R.C.C raft and providing vertical headers including plywood/steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete.(Excluding reinforcement, including cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

199


Completed Labour

SR.NO. & CODE

NO.





Rmt. 113.00 12.00


17 Cu.m. 2950.00 456.00

Cu.m. 395.00 129.00

M.T. 53400.00 6606.00


Spec.No.: BR.5/Page No. 105/I.S. 456 (2000)

16 BR

5G

Providing and fixing UPVC pipes of 110 mm diameter and of required length for relieving water pressure, stone filter as directed complete.(For relieving water pressure in raft).

Providing and laying in position Precast Plain cement concrete M-10 grade blocks of rectangular shape, for aprons on U/s and D/s sides as per drawing and as directed complete.


18 BR

6A

Providing and laying in position trap / granite / quartzite / gneiss stone of appoved quality for aprons on U/s and D/s sides as per drawing and as directed complete.Weight of atleast 80% of stones shall be more than 40kg.( Including Royalty charges )


19 BR

8

Providing, fabricating, launching, floating and grounding in position steel curbs for wells with necessary steel bracing and steel cuting edges as shown in the detailed drawings.

200


Completed Labour

SR.NO. & CODE

NO.


M.T. 51700.00 3229.00





Spec.No.: BR.10/Page No. 110

20 BR

Providing fabricating and setting out mild steel cutting edges for R.C.C well curbs as shown on the detailed drawings.

21 BR

12

Providing and laying in situ C.C required grade of trap / granite / quartzite / gneiss metal for R.C.C well curbs including necessary compacting by vibrating, finishing and finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface curing complete. (Excluding reinforcement and including steel shuttering & cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

201


Completed Labour

SR.NO. & CODE

NO.






23

A) 4 m. dia. Twin wellDepth up to 5 m. Rmt 33340.00 15522.00

Depth 5 m. to 10 m. Rmt. 41675.00 19405.00

Depth 10 m. to 15 m. Rmt. 45010.00 23296.00

Depth 15 m. to 20 m. Rmt. 51675.00 24059.00

B) 4 m. dia. Single well

Depth up to 5 m. Rmt. 32765.00 9553.00

Depth 5 m. to 10 m. Rmt. 42595.00 12363.00

Depth 10 m. to 15 m. Rmt. 45875.00 13319.00

22 BR 131

Providing and laying in situ C.C. of requierd grade of trap / granite / quartzite / gneiss metal in well steining including compacting by vibrating, finishing and finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface, curing complete. (Excluding reinforcement and including steel shuttering & cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering / formwork will not be allowed).

Sinking the wells for foundation in soft strata / boulders etc. which can be removed by grabing & chiselling soft disintegrated rock which requires special efforts , including blasting , large scale dewatering heavy chiselling, cutting by pneumatic tools and all materials available to sink trough such strata including removal of obstacles and use of necessary plant & machinery, drivers etc.and proper setting of wells including all sinking (depth 0 to 5 meters).

202


Completed Labour

SR.NO. & CODE

NO.


Depth 15 m. to 20 m. Rmt. 52425.00 15308.00

203


Completed Labour

SR.NO. & CODE

NO.


C) 6 m. dia. Single well

Depth up to 5 m. Rmt. 52450.00 27234.00

Depth 5 m. to 10 m. Rmt. 68180.00 35502.00

Depth 10 m. to 15 m. Rmt. 73425.00 38239.00

Depth 15 m. to 20 m. Rmt. 83920.00 43704.00

D) 8 m. dia Single wellDepth up to 5 m. Rmt. 94430.00 58671.00

Depth 5 m. to 10 m. Rmt. 122760.00 76279.00

Depth 10 m. to 15 m. Rmt. 132200.00 82151.00

Depth 15 m. to 20 m. Rmt. 151090.00 93876.00

E) 10 m. dia Single wellDepth up to 5 m. Rmt. 111075.00 69480.00

Depth 5 m. to 10 m. Rmt. 144400.00 90331.00

Depth 10 m. to 15 m. Rmt. 155505.00 97274.00

Depth 15 m. to 20 m. Rmt. 177720.00 111165.00

1) 100% Extra for depth above 20m

a) Depth up to 5 m. Rmt 69970.00 43329.00

b) Depth from 5 m. to 10 m. Rmt 90960.00 56327.00

c) Depth from 10 m. to 15 m. Rmt. 92460.00 57254.00

d) Depth from 15 m. to 20 m. Rmt. 111950.00 69330.00

1) 100% Extra for depth above 20m

Note : Add 200% for soft rock.Add 400% for hard rock.

2) for change in diameter of well add difference on prorata on area basis.

Note: Add 200% for sinking in soft rock and 400% in hard rock.

24 BR 14

Sinking of well 7 m. dia. for foundation through all strata except rock by approved method including removal of obstacle and use of necessary plant, machinery, divers etc. and proper seating of the well.

e) For change in diameter of well add difference on prorata on area basis.

2) for change in diameter of well add difference on prorata on area basis.

204


Completed Labour

SR.NO. & CODE

NO.



205


Completed Labour

SR.NO. & CODE

NO.


No. 4745.00 471.00


No. 5065.00 514.00


Cu.m. 3265.00 587.00


Cu.m. 220.00 44.00


Cu.m. 3135.00 557.00

25 BR

16

Providing steel anchor dowels at the base of the well including drilling holes upto 2.5 m. depth in rock, placing the dowels in position and effectively grouting the holes. (32 mm dia. steel rod of 4.0 m. length grouted upto 2.5 m depth.)

26 BR

16A

Providing steel anchor dowels in rock for steining, including drilling holes upto 2.5 m. depth in rock, placing dowels in position and effectively grouting holes ( 32 mm diameter steel rod of 4.0 m length grouted upto 2.5 m depth.)

27

BR 17

Providing and laying in situ C.C M-15 of trap / granite / quartzite/ gneiss metal for the bottom plugs of wells in the dry or under water including compaction and curing wherever necessary.

28 BR

18

Providing and filling in well with sand/rubble and sand/shingle and sand including compaction between the top and bottom plugs. ( Including Royalty charges )

29 BR

19

Providing and laying in situ C.C. M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal for top plug of well including compaction by vibration and curing .


206


Completed Labour

SR.NO. & CODE

NO.





31

Liner of 750 mm dia. Rmt. 8340.00 3058.00




30 BR 24

Providing and laying in situ C.C.of required grade of trap / granite / quartzite / gneiss metal for R.C.C. well / pile cap including plywood/ steel formwork and steel, centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete. (Excluding M.S. reinforcement and including shuttering & cover block) The C.M.1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/ formwork will not be allowed).

Spec.No.: BR.24/Page No.124/I.S.456 (2000)Providing, placing and driving in position 6 mm thick permanent M.S. liner upto required depth with 12 mm thick M.S.cutting edge of 0.50 m length at bottom including fabricating, cutting the M.S.sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials, labour and lift etc. complete.

207


Completed Labour

SR.NO. & CODE

NO.



208


Completed Labour

SR.NO. & CODE

NO.


32

( A )For M-20

(i) 750 mm diameter Rmt. 4195.00 550.00

(ii) 900 mm diameter Rmt. 5050.00 626.00

(iii) 1000 mm diameter Rmt. 5955.00 708.00

(iv) 1200 mm diameter Rmt. 7465.00 989.00

( B )For M-25

(i) 750 mm diameter Rmt. 4295.00 532.00




( C )For M-30

(i) 750 mm diameter Rmt. 4415.00 538.00




( D )For M-35

(i) 750 mm diameter Rmt. 4485.00 550.00




Boring and providing specified grade R.C.C. cast in situ bored piles each of capacity as designed and of required diameter as directed, place through steel shell sunk to the required depth through all types of strata, use of bentonite slurry as directed including placing concrete by trimmey arrangement compaction of concrete and withdrawal shell etc. complete. (Excluding cost of reinforcement).


209


Completed Labour

SR.NO. & CODE

NO.



b) For C.C. M-20grade Cu.m. 3790.00 703.00



Rmt. 120.00 12.00

33 BR

27B

Providing and laying C.C. of required grade of trap / granite / quartzite / gneiss metal for cast in situ piers, abutments, returns, wings etc. including provision of 'V' shaped false joints to form suitable panels on the faces to approved design including plywood/ steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing and bailing out water. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering / formwork will not be allowed).


34 BR 57D

Providing and fixing UPVC pipe of 110 mm. dia and of required length for releving water pressure in abutment, riding returns, including necessary inverted filter etc. complete.


210


Completed Labour

SR.NO. & CODE

NO.


a) Mild steel bars M.T. 53150.00 3261.00

b) TMT/ H.Y.S.D steel bars M.T. 54530.00 3261.00


25 mm diameter and under. No. 160.00 30.00

28 mm diameter. No. 180.00 30.00

32 mm diameter. No. 225.00 36.00

36 mm diameter. No. 250.00 43.00

40 mm diameter. No. 285.00 49.00


35 BR

35

Providing and cutting, bending, hooking, laying, in position and tying bar reinforcement as per detailed drawing for R.C.C. works etc. complete.

36 BR

Providing welded joints for mild / H.Y.S.D/T.M.T steel reinforcement bars of

211


Completed Labour

SR.NO. & CODE

NO.





37 BR

29A

Providing and laying in situ C.C of required grade of trap / granite / quartzite/ gneiss metal for R.C.C caps over piers and abutments including necessray scaffolding, plywood/ steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete. (Excluding reinforcement and including centering & cover block.) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/ formwork will not be allowed).


212


Completed Labour

SR.NO. & CODE

NO.





Sq.m. 14.00 1.20

Rmt. 1160.00 80.00


38

BR

30

Providing and laying in situ cement concrete of required grade of trap / granite / quartzite / gneiss metal for the R.C.C concrete block below the bearing including scaffolding, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete. (Excluding reinforcement and including steel formwork, plywood centering & cover block .) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).


39 BR

Providing tar paper bearing of approved quality in proper size etc. complete.


40

BR

Providing M.S.PLATE expansion joints as per detailed drawings.

213


Completed Labour

SR.NO. & CODE

NO.


41 0.90 ---

No. 780.00 85.00


Height upto 3.00 ma) For C.C. M-20 grade Cu.m. 4820.00 1173.00

Providing elastomeric bearing in required position testing, cuting, fixing in position as per detailed drawing including scaffolding etc. complete.

Cu.Cm.


42

BR

48

Providing vent holes in slab and wearing course of 100 mm dia. of galvanised iron pipe having tail end 300 mm. Below soffit of slab, with mild steel sheet box (18 gauge) in conical funnel shape with 200 mm x 200 mm size iron grating on top as per drawing etc. complete.

43 BR

38A1

Providing and laying in situ Cement concrete of required grade of trap / granite / quartzite / gneiss metal for R.C.C Work in solid / deck slab including plywood/steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing and finishing in cement plaster (Excluding reinforcement, including cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering / formwork will not be allowed).

214


Completed Labour

SR.NO. & CODE

NO.



215


Completed Labour

SR.NO. & CODE

NO.


c) For C.C. M-30grade Cu.m. 5040.00 1204.00


Note :

Height upto 3 m a) For C.C. M-20 grade Cu.m. 6055.00 1827.00


Note :

Add for height above 3m to 6m. - 5% (Above average bed level)

Add for height above 6m. - 10% (Above average bed level)


44 BR

38B

Providing and laying in situ cement concrete of required grade of trap / granite / quartzite / gneiss metal for R.C.C Work in arches including skew back, plywood/steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete. (Excluding reinforcement, including cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed).

Add upto height above 3m to 6m. - 5% (Above average bed level)


216


Completed Labour

SR.NO. & CODE

NO.


a) For C.C. M-20 grade Cu.m 5200.00 1202.00

b) For C.C. M-25 grade Cu.m 5320.00 1215.00

c) For C.C. M-30 grade Cu.m 5420.00 1234.00

d) For C.C. M-35 grade Cu.m 5490.00 1246.00

Height upto 3 m Note :


No. 565.00 98.00


45

BR 38A

Providing and laying in situ Cement concrete of required grade of trap / granite / quartzite / gneiss metal for R.C.C. Work in main / cross, girder, diaphragm etc. including plywood/ steel formwork, steel centering, compaction by vibrating finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided, curing etc. complete. (Excluding reinforcement, including cover block) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

Add upto height above 3m to 6m. - 5% (Above average bed level)


46 BR

Providing galvanised iron 100 mm diameter 110 mm outer diameter pipe for water spouts as per drawing.

217


Completed Labour

SR.NO. & CODE

NO.


a ) UPVC (SWR) grade 110 mm pipe No. 165.00 25.00


218


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 725.00 74.00

Spec. No.: BR. 43/Page No. 138

Cu.m. 2580.00 366.00


Cu.m. 325.00 67.00

Spec.No.: BR.46/Page No.140.

50

a) For 15 mm Thickness Sqm. 360.00 56.00

b) For 25 mm Thickness Sqm. 600.00 94.00

c) For 40 mm Thickness Sqm. 960.00 149.00

Spec. No. :M.O.R.T.& H 2001 Clause No 515

47 BR

Providing expansion joints with 25 mm thick bitumenous pad as per detailed drawings.

48 BR

Providing and laying in situ 1:3:6 cement concrete of trap / granite / quartzite / gneiss metal for haunch filling including compacting, curing complete.

49 BR

Providing trap/granite/quartzite/ gneiss rubble filling over haunches and arches including hand packing.

Providing and laying Mastic asphalt wearing course with paving grade bitumen 14 % by weight of total mix, filler, fine & course aggregate, meeting the requirements given in table 500-29, of MORT&H Specifications prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 100 0 C, protruding 1 mm to 4 mm over mastic surface, etc. complete (excluding tack coat, mix design is required for each case).

219


Completed Labour

SR.NO. & CODE

NO.


P. No. 207

i) For C.C. M-20 grade Cu.m. 4145.00 965.00

ii) For C.C. M-25 grade Cu.m. 4245.00 978.00

i) For C.C. M-20 grade Cu.m. 8280.00 1015.00

ii) For C.C. M-25 grade Cu.m. 8380.00 1027.00

51

BR

47C

A) Providing and laying in situ Cement concrete of required grade of trap / granite / quartzite /gneiss metal for wearing course 8 cm. thick including plywood/steel formwork and compaction by vibrator, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give smooth and even surface, filling joints with bitumen, curing etc. complete. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden formwork will not be allowed).(Excluding reinforcement)

B) Including steel fibres confirming to I.S. 280-1978 and IRC- SP-46-1997 (fibre diameter 0.50 mm to 1.00 mm and length 25mm. to 50mm.) at the rate of 40 Kg/cum Note :-a) Item to be used for bridges only b) for item no 51 (B), separate item of steel reinforcement shall not be considered.


220


Completed Labour

SR.NO. & CODE

NO.


a) For C.C. M-20 grade

i) For kerb and ballast wall. Cu.m. 4660.00 1092.00

ii) For box return Cu.m. 5450.00 1173.00

b) For C.C. M-25 grade

i) For kerb and ballast wall. Cu.m. 4760.00 1111.00

ii) For box return Cu.m. 5550.00 1185.00

iii) For Box cell Cu.m. 5840.00 1393.00

52 BR 50A

Providing and laying in situ Cement concrete of required grade or trap / granite / quartzite / gneiss metal for RCC work of ballast walls, dirt walls, kerbs, box returns box cell etc. including scaffolding, compaction, finishing, plywood/steel formwork, steel centering. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering / formwork will not be allowed).


221


Completed Labour

SR.NO. & CODE

NO.


Rmt. 1400.00 428.00

53 BR

51A

Providing R.C.C. parapet with M-20 Cement concrete of trap / granite / quartzite / gneiss metal with cast in situ / precast panels as per the detailed drawing height of 1.1 mt.above top of road surface, with post of 225 mm x 190 mm at 2 meter or less at equal distance suitable to span having 10 mm reinforcement of minimum 4 bars and 6 mm stirrups and R.C.C panels of approved design at clear distance of 125 mm and thickness of 150 mm with 10mm dia. 3 no.of bars reinforcement at top and bottom and 6 mm dia. 4 no.bars as vertical or horizontal rails of size 100 mm x 150 mm and with clear speacing of 240 mm including scaffolding, steel centering, plywood/steel formwork, compacting finishing, uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface and curing etc. complete. (Including cost of reinforcement & cover block.) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface.

Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/ formwork will not be allowed).

Spec.No.: BR.51(A)/Page No.144/I.S. 456(1978)

222


Completed Labour

SR.NO. & CODE

NO.


Rmt. 1570.00 178.00

Spec.No.: BR.51(B)/Page No.145

Rmt. 1655.00 294.00

Spec.No.: BR.51(D)/P.No.146

54 BR 51B

Providing railing of mild steel angle of 75mm x 75 mm x 10 mm I section of 75 mm x 35 mm/Channel section 75 mm x 40 mm x 4.4 mm/ rectangular hollow section of 66 mm x 33 mm with 3 no. of 37.5 mm G.I. bars at a distance of 370 mm C/C bottom bar is provided at 150 mm above kerb and height of railing upto top bar is at 1.10 mt from road top surface including drilling holes, fixing post to kerb by 25 mm dia. bolts embeded 200 mm in kerb, including scaffolding, three coats of painting etc. as per drawing complete.

55 BR

51D

Providing removable railing of height 1.10 m with mild steel channel size 75 mm x 40 mm of Ht.1.225 mt. above top of road surface posts and removable galvanised iron pipe of dia 37.5 mm 3 nos. at distance 370 mm C/C and bottom bar 150 mm above kerb as per the detailed drawings including scaffolding and painting etc. complete.

223


Completed Labour

SR.NO. & CODE

NO.


Rmt. 1195.00 123.00

57 Rmt. 12180.00 98.00

Spec.No.:As directed by Enginer incharge.

Sq.m. 3094.00 813.00


Cu.m. 394.00 80.00

56 BR

51E

Providing railing of cast in situ R.C.C posts with 1:2:4 (M-15) cement concrete trap / granite / quartzite / gneiss metal size 150 mm x 150 mm x 1.240 mm and removable galvanised iron pipes of dia. 37.5 mm 3 nos. at distance 370 mm C/C and bottom bar 150 mm above kerb as per the detailed drawings (including cost of reinforcement) scaffolding,steel centering, plywood/steel formwork etc. complete. The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

Spec.No.: BR.51(E)/Page No.147/I.S. 456(2000)

Providing and laying of a strip seal expansion joint catering to maxium horizontal movement up to 70 mm, complete as per approved drawing and standard specifications to be installedby the manufacturer / supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.

58 BR

Providing and fixing marble tablet of size and description as per detailed drawings including moulded marble / 1:2 C.M. border.

59 BR

Providing trap / granite / quartzite / gneiss rubble filling behind the abutment, returns or wings.

224


Completed Labour

SR.NO. & CODE

NO.



225


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 304.00 36.00

Sq.m. 529.00 104.00

62 Rmt. 2475 170.00

60 BR

Providing and filling sand below raft and in box return including compaction etc.complete.


61 BR

Providing 90 cm thick flexible stone mat as per standard drawing including supplying all materials at work site spreading and compaction etc. complete.


Providing and fixing single sided "W" beam metalic anti crash barrier as per IRC-5 & MORTH specifications fixed on M.S. Post 'C' type channel of size 150 x 75 x 5 mm. 1.90 mtr. Long with "W" beam confirming IS:5386 grade Fe 410 of size 311 x 82.5 x 3 mm. including zinc coating to channel post, "W" beam and all nut bolts and fixing the post in 350 x 350 x 1140 mm. CC M-15 block at 2.00 m. centre to centre of channel post including providing and fixing of suitable reflective (luminous) diveces on the traffic face of the barrier at intervals to ensure adequate visibility during night and foggy conditions etc. complete.

Spec.No.: MORTH CL.No. 810 and IRC-5 Clause No. 115-4.

226


Completed Labour

SR.NO. & CODE

NO.


Metal Beam Crash Barrier

63 Rmt 2860.00 82.00

P. No. 330

64 Rmt 4180.00 117.00

Providing and erecting "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC channel vertical post of size150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m in height and 1.10 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per M.O.R.T.& H. clause 810 etc. complete.

Type - A, "W" : Metal Beam Crash Barrier

Spec. No. :M.O.R.T.& H. 2001 Clause No 810

Providing and erecting "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC channel vertical post of size 150 x 75 x 5 mm spaced 2 m centre to centre, 2.00 m in height and 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per M.O.R.T.& H. clause 810 etc. complete.

Type - B, "THRIE" : Metal Beam Crash Barrier

Spec. No. :M.O.R.T.& H. 2001 Clause No 810 P. No. 330

227


Completed Labour

SR.NO. & CODE

NO.


65

a) R.C.C. M-20 Grade Rmt 5335.00 175.00

b) R.C.C. M-25 Grade Rmt 5435.00 175.00

c) R.C.C. M-30 Grade Rmt 5555.00 175.00


P. No. 329

No. 1588.00 225.00

As per M.O.R.T.& H.

67 214.00 47.00


P. No. 535,& Clause No 2200 P. No. 571

Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with required grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified etc. complete.

66 BR

Providing and fixing in position G.I. water spouts having 100 mm inner dia & 110 mm outer dia pipe with C.I. greting and funnel as per standard drawing etc. complete.

Supplying, fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel complete including all accessories as per drawing and Technical Specifications and BS: 5400, section 9.1 & 9.2 (for PTFE) and clause 2004 of MORT&H Specifications etc. complete.

tonne capacit

y

228


Completed Labour

SR.NO. & CODE

NO.


68 M.T. 95600.00 12400.00


69

(MOST 12.1 / 1500 , 1600 , 1700)

a) Height upto 5.00 m Cum 6795.00

b) Height upto 5.00 m to 10 m Cum 7285.00

c) Height above 10.00 m Cum 7770.00

Providing and fabricating structural steel plate girder including fabrication of built up section as per detail design and drawing including cutting, fabricating,erecting, hoisting,fixing in position, making riveted / bolted / welded connection and including two coat of red oxide and two coat of oil paint of approved quality etc. complete.

Providing and casing special grade in controlled cement concrete of M-35 grade for Prestressed concrete work for main girder including slab , cross girder , box girder and balanced cantilever etc. including centering and scaffolding or launching including necessary plant and machinery for the job shuttering , vibrating curing , finishing in C.M. 1:3 etc. complete Steel and plywood formwork.

NOTE: 1) Add 50% on basis rate for span 30.00 to 50.00 m

2) Add 75% on basic rate for span 50 m and above.

222

C.D. :-CROSS DRAINAGE WORKDESCRIPTION OF ITEMS UNIT

Completed Labour

Cu.m. 395.00 91.00

Spec.No.: CD.1/Page No.159

Cu.m. 2520.00 477.00


SR.NO. & CODE

NO.


1 CD

1

Providing rubble filling of trap / granite / quartzite / gneiss stones in foundation including hand packing filling gravel / sand in the voids etc. complete.

2 CD

3B

Providing and laying in situ cement concrete of 1:4:8 proportion with trap / granite / quartzite / gneiss metal in foundation including necessary compacting and curing complete. (Including plywood/ steel formwork) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

223


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 3615.00 500.00

Spec.No.: CD.3/Page No.160 /I.S.456 (2000)

Sq.m. 840.00 184.00


Sq.m. 825.00 206.00

3 CD

3A

Providing and laying in situ cement concrete of M-15 / 1:2:4 with trap / granite / quartzite / gneiss metal in face wall including plywood/ steel formwork and steel centering, compaction by vibrator, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give smooth and even surface, filling joints with bitumen, curing etc. complete. (Excluding cost of reinforcement.) The C.M. 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering/formwork will not be allowed).

4 CD 4

Providing trap / granite / quartzite / gneiss rubble stone paving of 23 cm thickness on a bed of 15 cm. thick cement concrete of 1:4:8 proportion and fixing stones in proper line and level and camber, filling joints by C.M.1:4 proportion, pointing, with C.M.1:3, curing etc. complete.

5

CD

5

Providing trap / granite / quartzite / gneiss khandki paving of 23cm. thickness in 1:4 C.M. over bedding of 15cm thick cement concrete of 1:4:8 proportion with trap / granite / quartzite / gneiss metal including pointing with C.M. 1:3 and watering complete.

224


Completed Labour

SR.NO. & CODE

NO.



225


Completed Labour

SR.NO. & CODE

NO.


Diameter of pipe

NP-2 Class

450 mm. Rmt. 890.00 145.00

600 mm. Rmt. 1360.00 191.00

800 mm. Rmt. 2160.00 213.00

900 mm. Rmt. 2760.00 278.00

1000 mm. Rmt. 3255.00 316.00

1200 mm. Rmt. 4515.00 359.00

NP- 3 Class

450 mm. Rmt. 1685.00 220.00

600 mm. Rmt. 2380.00 227.00

800 mm. Rmt. 4335.00 271.00

900 mm. Rmt. 4450.00 352.00

1000 mm. Rmt. 5205.00 419.00

1200 mm. Rmt. 7150.00 448.00


Cu.m. 3700.00 513.00

6 CD

Providing and laying cement concrete pipe of I.S. N.P. class of required diameter in proper line, level and slope including providing, fixing collars or spigot and socket joint by rubber ring and in C.M.1:2 etc. complete.

7 CD

8

Providing cast in situ block of M-15 / 1:2:4cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etc. complete.(for craddle)

226


Completed Labour

SR.NO. & CODE

NO.


Spec.No.: CD.8/Page No.163/I.S.456 (2000)

227


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 6330.00 653.00

Cu.m. 2600.00 393.00


Cu.m. 225.00 47.00


Cu.m. 3635.00 683.00

Spec.No.:D.15/Page No.168/I.S.456 (2000)

No. 260.00 63.00

8 CD

Providing PRECAST M-20 R.C.C. slabs

over the spans of Cross Drainage work as

per drawings including reinforcement,

conveyance, fixing in C.M. 1:3 and curing,

finishing complete.


9 CD

Providing and laying in situ 1:3:6 cement concrete of trap / granite quartzite / gneiss metal for haunch filling including forms, compacting, curing and scaffolding etc. complete.

10 CD

Providing selected murum (having PI < 6 ) filling including laying in layers of 15 cm to 20 cm watering and compacting etc. complete. ( Including Royalty charges )

11 CD

15A

Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal for wearing course 8 cm. thick including compacting, finishing, in C.M. 1:3 proportion curing and filling joints with bitumen complete. (Excluding reinforcement)

12 CD

Providing stream lined R.C.C. guard stone including M-20 Cement concrete and steel reinforcement.

228


Completed Labour

SR.NO. & CODE

NO.



226

5 RD - ROAD WORKS

5(A) EXCAVATION AND EMBANKMENTDESCRIPTION OF ITEMS UNIT

Completed Labour

a) girths above 30 cm. to 60 cm. No. 82.00 82.00

b) girths above 60 cm. to 90 cm. No. 162.00 162.00

c) girths above 90 cm. to 180 cm. No. 391.00 391.00

d) girths above 180 cm. to 270 cm. No. 617.00 617.00

e) girths above 270 cm. to 450 cm. No. 975.00 975.00

f) girths above 450 cm. No. 1425.00 1425.00

Spec.No. : Rd.1 Page No. 179

2 (a) Cu.M. 59.00 4.00

(b) hard murum, hard murum with boulders Cu.M. 77.00 5.00

Spec. No. : Rd. 2 Page No. 180.

SR.NO. & CODE

NO.


1 RD 1A

Cutting down trees including trunks and branches and removing wood upto 1 meter below ground level and stacking the materials neatly with a lead of 50 m as directed with specified girths etc. Complete as directed by Engineer-in-charge.

Excavation for road way by mechanical means earth soil of all sorts sand, gravel, soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and spreading for embankment or stacking etc. as directed by Engineer in charge.

Note : The item shall be applicable for roller width, excavation and laying of embankment, gutter.

227


Completed Labour

SR.NO. & CODE

NO.


3 Cu.M. 340.00 73.00

4

A) With Power Roller Cu.M. 135.00 3.50

B) With Vibratory Roller Cu.M. 145.00 3.50


Providing, Laying, Spreading and compacting specified graded sand, best available murum in 30:70 proportion as sub-base course having P.I. less than 6, including spreading in uniform layers on a prepared base & compacting with power roller to achive the required compaction including all materials, labour, machinery, guarding, barricating complete with all leads & lifts of all materials etc. complete. (Proportion of sand & murum may be changed as per site condition requirement & accordingly rate will change.)

Spec. No. : Rd 24,25,28,38A P. No. 203,205,210

Note :Prior permission of S.E. in writing is necessary before including this item in estimate.

Providing earth work for embankment with approved materials obtained from excavation by mechanical means from Departmental land or the sources including all lifts and leads, laying in layers of 20 cm to 30 cm. thickness breaking clods dressing to the required lines, curves, grades and sections, watering and compacting etc. complete as directed by Engineer in charge.( Including Royalty Charges )

Note : 2) The item shall be applicable for new embankment of Road, Bridge approach and raised causeways.

228


Completed Labour

SR.NO. & CODE

NO.


5

A) With Power Roller Cu.M. 145.00 4.50B) With Vibratory Roller Cu.M. 155.00 4.50


6 Cu.M. 70.00 4.50


Providing earth work in embankment with approved materials obtained from excavation by mechanical means and other machineries including all lifts and leads upto 50 m. laying in layers of 20 cm. to 30 cm. thickness breaking clods, dressing to the required lines, curves, grade and section, watering and compaction to 95% of standard proctor density etc. Complete as directed by Engineer in charge. ( Including Royalty Charges )

Note :2) The item shall be applicable for new embankment of Road, Bridge approach and raised causeways.

Providing earth work in embankment with approved Fly ash obtained from Thermal power plant including loading unloading laying in layer of which loose thickness shall not exceed 200 mm. breaking clods of cover soil dressing to required lines, curves, grades & section, watering and compaction with power roller including providing earth work over it for minimum thickness of 0.50 m on top and 1.0 m on side slopes including without any flooding & compaction complete. The soil cover of required width be provided with the core and mechanically compacted simultaneously so as to have through compaction of each layer of Fly ash to the specified density as stipulated in IRC SP 58 2001 (Transportation charges for fly ash shall be considered separately for 0.60 Cum. quantity of fly ash only for per cum. of embankment)

229


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 74.00 74.00

Spec.No.: Rd.2/Page No.180

Cu.m. 81.00 81.00


Cu.m. 88.00 88.00


Cu.m. 183.00 183.00


Cu.m. 372.00 226.00


7 RD

2

Excavation for roadway in earth soil of all sorts sand, gravel or soft murum including dressing sectioning to the required grade, camber and side slopes and conveying the excavated materials with all lifts and upto a lead of 50 m and spreading for embankment or stacking as directed Engineer-in-charge.

8 RD

3

Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and upto a lead of 50 m and spreading for embankment or stacking as directed Engineer-in-charge.

9 RD

4

Excavation for roadway in hard murum and boulders including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and upto a lead of 50 m and spreading for embankment or stacking as directed Engineer-in-charge.

10 RD

5

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and upto a lead of 50 m and spreading or stacking as directed Engineer-in-charge.

11 RD

6

Excavation for roadway in hard rock by blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and upto a lead of 50 m and spreading or stacking as directed Engineer-in-charge.

230


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 454.00 300.00


Cu.m. 88.00 88.00


Cu.m. 95.00 95.00


Cu.m. 104.00 104.00


Cu.m. 195.00 195.00


12 RD

7

Excavation for roadway in hard rock by wedging/chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and upto a lead of 50 m and spreading or stacking as directed Engineer-in-charge.

13 RD

9A

Excavation for catch / side water gutter in all sort of soils, soft murum etc. to the specified section including stacking the excavated stuff in regular bund and disposing off unsuitable or excess stuff upto a lead of 50 m and spreading as directed Engineer-in-charge.

14 RD

9B

Excavation for catch / side water gutter in hard murum to the specified section including stacking the excavated stuff in a regular bund and disposing off unsuitable or excess stuff as directed Engineer-in-charge.

15 RD 9E

Excavation for catch / side water gutter in hard murum and boulders to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed Engineer-in-charge.

16 RD

9C

Excavation for catch / side water gutter in soft rock to the specified section including stacking the excavated stuff in a regular bund and disposing off unsuitable or excess stuff as directed Engineer-in-charge.

231


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 465.00 440.00


Cu.m. 75.00 75.00


Cu.m. 68.00 3.50


Cu.m. 66.00 3.00


17 RD

9D

Excavation for catch / side water gutter in hard rock by wedging & chisselling to the specified section including stacking the excavated stuff in a regular bund and disposing off unsuitable or excess stuff as directed Engineer-in-charge.

18 RD 9F

Excavation for widening of metal strips from 3.0 m. to 5.5 m. width in all soils by mechanical means including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lift upto a lead of 50m. and spreading for embankment or stacking as directed Engineer-in-charge.

19 RD

11

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm (about 8" to 12") breaking clods, dressing to the required lines, curves, grade 3% Camber design superelevation and section, watering and compaction to 100% of standard proctor density for a lead of 50 to 300 m inclusive from site of excavation to the site of deposition as directed Engineer-in-charge.

20 RD

11A

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm breaking clods, dressing to the required lines,curves,grade and section , watering and compaction to 95% of standard Proctor density for a lead of 50 m. to 300 m. with static roller etc. complete.

232


Completed Labour

SR.NO. & CODE

NO.


A} 50 mt to 100 mt Cu.m. 19.00 19.00B] 100 mt to 200 mt Cu.m. 30.00 30.00C} 200 mt to 300 mt. Cu.m. 42.00 42.00Spec.No.: Rd.17/Page No.196

Cu.m. 14.00 14.00


Cu.m. 39.00 3.50


Cu.m. 43.00 3.50

Spec.No.: Rd.10/Page No. 187

21 RD 18A

Conveying materials obtained from road cutting including all lifts, laying in layers, breaking clods, dressing to 3% camber /design superelevation , curves, grades and presceibed section for a lead of over 50 m.upto 300 m. as directed Engineer-in-charge.

22 RD

17

Laying materials obtained from road cutting in layers, breaking clods, dressing to 3% Camber design superelevation curve & prescribed section for embankment within a lead of 50 m.

23 RD 10

Watering and compacting the embankment formed of materials obtained from the road cutting, within a lead of 50 m, to 95% of standard proctor density after laying them in layers of 20cm to 30cm. with 3% Camber and design superelevation complete.

24 RD 10A

Watering and compacting the embankment formed of materials obtained from the road cutting, within a lead of 50 m, to 100% of standard Proctor density after laying them in layers of 20 cm to 30 cm with 3% Camber and design superelevation etc. complete.

233


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 145.00 64.00

Spec.No.: Rd.12/Page No. 189

Cu.m. 150.00 65.00


Cu.m. 130.00 58.00

Spec.No.:Rd.13/Page No. 194

Cu.m. 120.00 56.00

Spec.No.:Rd.16/Page No. 195

25 RD

12

Providing earthwork in embankment with approved materials obtained from departmental land or other sources upto lead of 50m, including all lifts, laying in layers of 20cm to 30 cm thickness breaking clods, dressing to 3% Camber, design superelevation, curves, grade and prescribed section, watering and compaction to 95% of standard proctor density etc. complete. ( Including Royalty Charges )

26 RD

12A

Providing earthwork in embankment with approved materials obtained from departmental land or other sources upto lead of 50 m. including all lifts, laying in layers of 20cm to 30cm thickness breaking clods, dressing to 3% Camber design superelevation curves, grade and prescribed section, watering and compaction to 100% of standard proctor density etc. complete.( Including Royalty Charges )

27 RD

13

Providing earthwork in embankment with approved materials obtained from departmental land or other sources including all lifts, laying in layers of 20 cm. to 30 cm. thickness breaking clods, dressing to the required lines, curves, grade and section, watering and compacting with power roller complete. ( Including Royalty Charges )

28 RD

16

Providing earthwork in embankment with approved materials obtained from departmental land or other sources including in all lifts and leads laying in layers of 15cm to 20cm thickness breaking clods, and dressing to the required lines, curves, grade and section etc. complete. ( Including Royalty Charges )

234

5(B) WBM Road Construction


Completed Labour

Cu.m. 195.00 91.00

Spec.No.:Rd.19/Page no.197

Cu.m. 186.00 128.00

I. 80 mm metal Cu.m. 286.00 133.00

II. 40 mm metal Cu.m. 310.00 146.00

b. By Breaking boulder (Hand broken)

I. 80 mm metal Cu.m. 279.00 205.00

II. 40 mm metal Cu.m. 302.00 227.00

Cu.m. 140.00 42.00


SR.NO. & CODE

NO.


29

RD

19

Supplying 15 cm to 23 cm. trap / granite/ quartzite / gneiss stone rubble at the road side for soling including conveying and stacking complete. (By blasting)

30 RD

19A

Supplying 15 cm. to 23 cm. trap / quartzite / gneiss stone rubble at the road side for soling including conveying and stacking complete. (By breaking boulders.)

31 RD

19B

Supplying trap /granite /quartzite / gneiss stone metal of required size by bringing the boulders at the road side breaking them to required gradation including conveying the boulders and stacking the broken metal etc. complete. (Prior approval of sample stack of broken metal by the Ex.Engineer is necessary, the date of approval will form part of the measurements)

a. By Breaking rubble obtained by blasting

Spec.No.:Rd.19,20,21,22/Page No. 197 to 201

32 RD 23

Supplying murum having PI < 6 at the road side, including conveying and stacking complete.

235


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 130.00 35.00


Cu.m. 190.00 42.00


Cu.m. 130.00 47.00


Cu.m. 23.00 23.00


Cu.m. 14.00 14.00


Cu.m. 23.00 23.00


Cu.m. 20.00 20.00


33 RD

24

Supplying soft murum at the road side, including conveying and stacking complete.

34 RD

25

Supplying sand at the road side, including conveying and stacking complete.

35 RD

26

Supplying gravel at the road side, including conveying and stacking complete.

36 RD 27

Laying 15 cm to 23 cm trap / granite / quartzite / gneiss stone rubble soling including hand packing with rubble chips complete. (excluding cost of material).

37 RD

28

Spreading gravel / sand / soft murum /avilable murum over rubble soling /W.B.M.surface blanketing berms etc.complete.

38 RD 29A

Spreading 80 mm metal including sectioning complete.

39 RD

29

Spreading 40 mm metal including sectioning complete.

236


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 11.50 2.50

a) By Vibratory Roller Sq.m. 14.00 2.00

Spec.No.:Rd.32/Page No.205

Sq.m. 4.50 4.50


Sq.m. 12.00 2.50

a)By Vibratory Roller Sq.m. 16.00 2.50


Sq.m. 7.00 1.25

a) By Vibratory Roller Sq.m. 10.00 1.25


Sq.m. 3.00 1.00

Sq.m. 5.00 1.00


40 RD 32

Compacting the sub grade/gravel/ oversize metal (200 mm loose) layers for all widths with static roller including necessary, labour, materials and artificial watering complete.

41 RD

33A

Picking the road surface including sectioning complete. (WBM suface)

42 RD 35

Compacting the sub grade/gravel/ size metal (100 mm loose) layers for all widths with static roller including necessary, labour, materials and artificial watering complete.

43 RD

38A

Compacting the hard murum / kankar for all widths (200 mm. loose) with static roller including necessary artificial watering complete.

44 RD 40A

Compacting the hard murum side widths layerwise on each side with static roller including necessary artificial watering complete .

a) By Vibratory Roller 10 cm to 30 cm compacted thickness

237


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 650.00 234.00


Cu.m. 685.00 248.00


Cu.m. 715.00 190.00


Cu.m. 460.00 160.00


Cu.m. 460.00 160.00


Cu.m. 395.00 140.00


45 RD 41A

Supplying crushed metal 40 mm of trap / granite / quartzite / gneiss stone metal at the road side including conveying and stacking for use in bituminous road work.

46 RD 41B

Supplying crusher broken 25 mm. of trap / granite / quartzite / gneiss stone metal at the road side including conveying and stacking for use in bituminous road work.

47 RD 41C

Supplying crusher broken 20 mm. Trap / granite/ quartzite / gneiss stone aggregate at the road side including conveying and stacking for use in bituminous work.

48 RD 41D

Supplying crusher broken 12 mm trap / granite / quartzite / gneiss stone aggregate at the road side including conveying and stacking for use in bituminous road work.

49 RD

41E

Supplying 10 mm. trap/granite/ quartzite / gneiss stone aggregate at the road side including conveying and stacking for use in bituminous road work.

50 RD 41F

Supplying 6 mm trap / granite / quartzite / gneiss stone aggragate at the road side including conveying and stacking for use in bituminous road work.

238


Completed Labour

SR.NO. & CODE

NO.


Cu.m. 120.00 14.00


Sq.m. 0.45 0.45

53 Sq.m. 43.00 24.00


51 RD 41G

Supplying stone dust of trap / granite / quartzite / gneiss stone aggregate at the road side including conveying and stacking for use in bituminous road surface. ( Including Royalty Charges )

52 RD

82

Picking up loose metal including stacking at the road side complete.


Providing pick and roll surface by picking the old WBM surface to the required standard, adding 30% of 40mm size metal and required quantity of murum including laying sectioning, watering, compacting with static roller with thin layer of murum blindage on carrageway, watering and compacting by static roller, including cost of all materials, loading, unloading, stacking and labour etc. complete.

239


Completed Labour

SR.NO. & CODE

NO.


54

A) Plant Mix Method

i) Grading-I Material Cum. 690.00 13.00

ii) Grading-II Material Cum. 705.00 13.00

iii) Grading-III Material Cum. 725.00 13.00

B) By Mix in Place Method



iii) Grading-III Material Cum. 595.00 13.00C)



iii) Grading-III Material Cum. 610.00 11.00

Spec. No. M.O.R.T.& H. - 2001 Cl. 401 P. No. 101

Granular Sub-Base with Close Graded Material (Table:- 400-1) Page 101

Providing granular sub-base by close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density etc. complete as per clause 401.

Providing granular sub-base by close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density etc. complete as per clause 401.

Granular Sub-Base with Coarse Graded Material (Table:- 400- 2)

Providing granular sub-base by coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC, and compacting with vibratory roller to achieve the desired density, etc complete as per clause 401.

240


Completed Labour

SR.NO. & CODE

NO.


55

(A) Cum. 1090.00 120.00

(B) Cum. 1185.00 120.00

(C) Cum. 1215.00 120.00

(D) Cum. 1250.00 120.00

Spec. No. M.O.R.T.& H. - 2001 Cl. 404 P.112

56 Cum. 990.00 15.00

Providing, Laying, Spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8 to 10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up the interstices of coarse aggregate, watering and compacting to the required density, etc. complete.

For metal grade I, using stone screening type A

For metal grade II, using stone screening type A

For metal grade II, using stone screening type B

For metal grade III, using stone screening type B

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as directed etc complete.(Excluding transportation of materials.)

Spec. No. M.O.R.T.& H. - 2001 Cl. 406 P. 123

241

5(C) ASPHALTIC CONSTRUCTION


Completed Labour

57 Sqm. 106.00 7.00

RD64

Spec. No. : Rd. 64 / Page No. 233

58 Sqm. 73.00 7.00

RD64


59 Sqm. 150.00 8.00

SR.NO. & CODE

NO.


Providing single coat surface dressing on W.B.M. road surface including supplying all materials, preparing and cleaning the base, heating and applying bitumen of VG-30 (60/70) grade, spreading chips use of tools, plant and equipments and rolling, with cstatic roller of 8-10 tonnes etc. complete.

Providing single coat surface dressing on black topped road surface including supplying all materials, cleaning the road surface, heating and applying bitumen of VG-30 (60/70) grade , spreading chips, use of tools, plant and equipments and rolling, with static roller of 8-10 tonnes etc. complete.

Providing and constructing 75 mm.thick bituminious bound macadam (BBM) road surface including supplying all materials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 (60/70) grade @ 2 Kg / sqm, spreading 12 mm.size chips compacting with power roller etc. complete. Including picking of existing WBM surface.

Spec. No. : As directed by Engineer-in-charge,& Govt. of Mah Circular No :- 12001/ pk-2/pl-3 Dt-24.1.01

242


Completed Labour

SR.NO. & CODE

NO.


60 Sqm. 175.00 8.00

61(A) Sqm. 122.00 6.00

Providing and constructing 75mm.thick bituminous bound macadam (BBM) road surface including supplying all materials, preparing the existing road surface, spreading 40mm.stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of VG-30 (60/70) grade @ 2 kg / sqm , spreading 12 mm.size chips compacting with power roller etc.complete including applying tack coat at the rate of 50 Kg./100 Sqm. on existing bitumen surface.


Providing and constructing 50 mm.thick bituminious bound macadam (BBM) road surface including supplying all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 (60/70) grade , @ 1.75 kg / sqm, spreading 12 mm.size chips compacting with power roller etc. complete. Including picking of existing WBM surface.


243


Completed Labour

SR.NO. & CODE

NO.


61(B) Sqm. 132.00 7.00For Patch repairs onlyProviding and constructing 50 mm.thick bituminious bound macadam (BBM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 (60/70) grade , @ 1.75 kg / sqm, spreading 12 mm.size chips compacting with power roller etc. complete. Including picking of existing WBM surface & including exacavation of disturebed surface to make a uniform geometric shapes with straight edge etc. complete. ( For Patch repairs only )


244


Completed Labour

SR.NO. & CODE

NO.


62(A) Sqm. 145.00 5.00Providing and constructing 50mm.thick bituminous bound macadam (BBM) road surface including supplying all materials, preparing the existing road surface, spreading 40mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of VG-30 (60/70) grade . @ 1.75 kg / sqm, spreading 12 mm.size chips compacting with power roller etc.complete including applying tack coat at the rate of 50 Kg./100 Sqm. on existing bitumen surface.


245


Completed Labour

SR.NO. & CODE

NO.


62(B) Sqm. 156.00 7.00For Patch repairs onlyProviding and constructing 50mm.thick bituminous bound macadam (BBM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of VG-30 (60/70) grade . @ 1.75 kg / sqm, spreading 12 mm.size chips compacting with power roller etc.complete including applying tack coat at the rate of 50 Kg./100 Sqm. on existing bitumen surface & including exacavation of disturebed surface to make a uniform geometric shape with straight edge etc. complete. ( For Patch repairs only )


246


Completed Labour

SR.NO. & CODE

NO.


63 Sqm. 110.00 7.00

RD64


64 Sqm. 150.00 11.00

RD63


Providing and laying single coat premix surface dressing including supplying materials & bitumen of VG-30 (60/70) grade, preparing and cleaning the road surface, diversion, heating bitumen, applying tack coat, mixing bitumen and chips in bitumen mixer, laying bitumenous single coat premix surface dressing over W.B.M. road surface compacting by static roller etc complete.

Providing 20 mm thick open graded premix bituminous carpet including supplying all materials & bitumen of VG-30 (60/70) grade, preparing and cleaning the base, including brooming heating bitumen, applying tack coat 10.00 kg / 10 sqm, laying the carpet and compacting, with static roller etc complete. with out seal coat (on W.B.M. surface) ( Cold mix )

247


Completed Labour

SR.NO. & CODE

NO.


65 Sqm. 125.00 11.00

RD63


66 Sqm. 185.00 12.00

RD62


67 Sqm. 160.00 12.00

RD62

Providing 20 mm thick open graded premix bituminous carpet including supplying all materials & bitumen of VG-30 (60/70) grade, preparing and cleaning the base, heating bitumen, applying tack coat at rate of @ 5 kg / 10 sqm mixing hot bitumen and chips, laying the carpet and compaction, with static roller etc. complete. (over B.T.Surface) ( Cold mix )

Providing 25 mm thick premix bituminous carpet including supplying all materials & bitumen of VG-30 (60/70) grade, preparing the existing base, including brooming, heating bitumen, applying tack coat, at the rate of 10 kg / 10 sqm bitumen, mixing hot bitumen and chips, laying the carpet layer and compacting, with static roller etc. complete. (OVER W.B.M.) ( Cold mix )

Providing 25 mm thick premix bituminous carpet including supplying all materials & bitumen of VG-30 (60/70) grade, preparing the existing base, heating bitumen, applying tack coat at the rate of 5 kg / 10 sqm bitumen, mixing hot bitumen and chips, laying the carpet layer and compacting, with static roller etc. complete. (Over B.T. Surface) (Cold mix)

248


Completed Labour

SR.NO. & CODE

NO.



249


Completed Labour

SR.NO. & CODE

NO.


68 Sqm. 57.00 7.00

RD66

Spec. No. Rd. 66 / P. No. 233

69

a) By manual laying Sqm. 48.00 7.00

b) Laying with paver finisher Sqm. 52.00 5.00

70

(I) By mechanical Sprayer

Sqm. 24.00 1.20

Sqm. 45.00 2.30

(II) By manual means

Sqm. 31.00 6.00

Sqm. 52.00 7.00

Providing bituminous liquid seal coat to black top surface including supplying all materials & bitumen of VG-30 (60/70) grade , preparing existing road surface, heating and applying bitumen, spreading chips and rolling, by static roller etc. complete.

Providing bituminous Premix seal coat to black top surface, including supplying all materials & bitumen of VG-30 (60/70) grade , preparing existing road surface, heating bitumen, mixing hot bitumen and chips, laying and rolling by static roller etc. complete. (Tack coat shall not be added)

Providing and applying tack coat of bitumen VG-30 (60/70) grade by manual / mechanical sprayers including conveying, heating and cost of bitumen etc. complete.

a) At the rate of 5 kg/10 sqm. on B.T. surface

b) At the rate of 10 kg/10 sqm. on W.B.M. surface



Spec.No.: RD 49.3.1 (e),P. No. 225, RD

250


Completed Labour

SR.NO. & CODE

NO.


71

(I) By mechanical Sprayer

Sqm. 23.00 1.20

Sqm. 44.00 2.30

(II) By manual meansSqm. 30.00 6.00

Sqm. 51.00 7.00

Providing and applying tack coat of bitumen VG-10 (80/100) grade by manual / mechanical sprayers including conveying, heating and cost of bitumen etc. complete.





Spec.No.: RD 49.3.1 (e),P. No. 225, RD 47.3.3 P. No. 224

251


Completed Labour

SR.NO. & CODE

NO.


72 Sqm. 121.00 2.30

P. No.192, RD 47.3.3 P. No.224

73 Sqm. 144.00 2.30

P. No. 192, RD 47.3.3 (ii) / P. No. 224

Providing, laying and rolling open - graded premix surfacing (Hot Mix Hot Laid) of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumen of VG-30 (60/70) grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades. Including tack coat of VG-30 (60/70) grade Bitumen @ 5kg/10 sq.m etc complete. (on B.T. Surface)

Spec.No.: MORT&H 2001 clause 511

Providing, laying and rolling of open - graded premix surfacing ( Hot Mix Hot Laid )of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumen of VG-30 (60/70) grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades. Including tack coat of VG-30 (60/70) grade Bitumen @ 10kg/10 sq.m etc complete. (On WBM Surface )

Spec.No.: MORT&H 2001 clause 511

252


Completed Labour

SR.NO. & CODE

NO.


74

I) Static Roller Cum. 7450.00 101.00

II) Vibratory Roller Cum. 7700.00 101.00

P. No.179, RD 47.3.3 P. No. 224

Providing and laying 25 mm. thick hot mixed hot laid Semi-Dense Bituminous Concrete with 5.0 % bitumen of VG-30 (60/70) grade, by weight of total mix, using crushed aggregates of grading II, including supplying all materials & filler 2 % by weight of mix asper job mix, including diversion of traffic, heating bitumen and chips, mixing bitumen, chips and filler in drum mix plant, laying semi-dense bituminous concrete with a paver finisher to the required grade, level and alignment, including compacting with static / vibratory roller, including tack coat of VG-30 (60/70) grade bitumen at the rate of 5 kg / 10 sqm, cleaning etc. complete.

Spec.No.: M.O.R.T& H.2001, CL.No.508

253


Completed Labour

SR.NO. & CODE

NO.


75 Cum. 7790.00 101.00

76 Cum. 4800.00 91.00

Providing and laying 25 mm. thick hot mixed hot laid Semi - Dense Bituminous Concrete with 5.0 % bitumen of VG-30 (60/70) grade, by weight of total mix, using crushed aggregates of grading II, including supplying all materials & filler 2 % by weight of mix as per job mix, including diversion of traffic, heating bitumen and chips, mixing bitumen, chips and filler in drum mix plant, laying semi-dense bituminous concrete with hydrostatic paver finisher with sensor control to the required grade, level and alignment, including compacting with vibratory roller, including tack coat of VG-30 (60/70) grade bitumen at the rate of 5 kg / 10 sqm, cleaning etc. complete.

Spec.No.:M.O.R.T.& H. 2001. Clause.No.508 P. No.179, R.D. 47.3.3. P. No. 224

Providing and laying Hot Mix Hot Laid Bituminous Macadam 50 / 75 mm average thickness with 3.3 % bitumen of VG-30 (60/70) grade, by weight of total mix for levelling course to remove irregularities, including all material and crushed aggregates of grading II, premixed with bituminous binder, including diversion of traffic, heating bitumen and chips in drum mix plant, laying bituminous macadam over a previously prepared surface by paver finisher to the required grade, level & alignment, including compacting with static roller, transportation and cost of all materials, Cleaning etc. complete. (excluding tack coat)

254


Completed Labour

SR.NO. & CODE

NO.


77 Cum. 4860.00 91.00

78 Cum. 4900.00 91.00

Spec.No.:M.O.R.T.& H. 2001. Clause.No. 504 / P. No. 160

Providing and laying Hot Mix Hot Laid Bituminous Macadam 50 / 75 mm average thickness with 3.3 % bitumen of VG-30 (60/70) grade by weight of total mix for levelling course to remove irregularities, including all material and crushed aggregates of grading II, premixed with bituminous binder, including diversion of traffic, heating bitumen and chips in drum mix plant, laying bituminous macadam over a previously prepared surface by paver finisher to the required grade, level & alignment, including compacting with Vibratory roller, transportation and cost of all materials,cleaning etc. complete. (excluding tack coat)

Spec.No.:M.O.R.T.& H. 2001. Clause.No. 504 P. No. 160

Providing and laying Hot Mix Hot Laid Bituminous Macadam 50 / 75 mm Average thickness with 3.3 % bitumen of VG-30 (60/70) grade by weight of total mix for levelling course to remove irregularities, including all material and crushed aggregates of grading II, premixed with bituminous binder, including diversion of traffic, heating bitumen and chips in drum mix plant, laying bituminous macadam over a previously prepared surface by Hydrostatic paver finisher with sensor control to the required grade, level & alignment, including compacting with Vibratory roller, transportation and cost of all materials, cleaning etc. complete. (excluding tack coat)

255


Completed Labour

SR.NO. & CODE

NO.



256


Completed Labour

SR.NO. & CODE

NO.


79

Cum. 6680.00 90.00

Cum. 6630.00 90.00

Providing and laying Dense Graded Bituminous Macadam of required thickness on prepared surface with specified graded crushed aggregates for base / binding course premixed with bitumen of VG-30 (60/70) grade and 2 % filler as cement of total weight of aggregate as per Job Mix Formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade, level and alignment,compacting with vibratory roller to achieve the desired compaction as per MORT & H specification complete in all respect, excluding cost of tack coat etc complete. ( The rate is for bitumen content @ 4.25 % by weight of total mix )

I) For grading I material ( 40 mm nominal size ) for 80 to 100 mm thickness

II) For grading II material ( 25 mm nominal size ) for 50 to 70 mm thickness


257


Completed Labour

SR.NO. & CODE

NO.


80 Sq.m. 23.00 23.00

81 Cum. 27.00 27.00

82 Sq.m. 215.00 10.00

Labour for metal patch repairs including preparing surface, adding required quantity of metal, murum, watering, ramming etc complete.


Labour for screening metal chips etc complete.


Providing, laying & compacting of Built up spray grout layer (BUSG) 75mm thick over prepared base consisting of two layers composite construction of compacted crushed stone coarse aggregates with application of bitumen binder of VG-30 (60/70) Grade @ 1.5 kg/sqm. after each layer, & with key aggregates placed on top of the second layer & compacting with power roller 8-10 tonnes but excluding cost of tack coat & excluding scarifying etc. complete.


259

5(D) CONCRETE PAVEMENT


Completed Labour

82

(including initial lead of 5 Km)As directed by Engineer-incharge.

a) M-30 Grade Cu.m. 4620.00 375

b) M-35 Grade Cu.m. 4690.00 375

c) M-40 Grade Cu.m. 4740.00 375

SR.NO.

& CODE

NO.


Providing and Laying in situ cement concrete of required grade, of trap/ granite/quartzite/gneiss metal for cement concrete pavement including mixing in mixer , ramming plywood/steel formwork,steel centering curing , applying oil on both side of centering compaction by vibrating using plate , needle and screed vibrator as required brooming concrete surface to get serration levelling the surface to the camber as directed and curing etc. complete including use of plastisizer as directed by Engineer incharge.(excluding cost of reinforcement) newly laid concrete shall be covered by gunny bag plastic, tarpolin etc.(wooden centering /formwork will not allowed) as per specification given and directed by Engineer-incharge Item include cement vata in C.M.1:8 at 0.6 m. x 0.6 m.c/c admeasuring 80 mm. at bottom and 40 mm.at top and depth of 75 mm. and maintaining the same throughout 28 days curing period and removing the same thereafter by using light tools without damaging pavement as directed by Engineer-incharge.

By using NonTilting Mixer & Weight batcher of approved quality

260


Completed Labour

SR.NO.

& CODE

NO.


83

a) M-30 Grade Cu.m. 5270.00 137

b) M-35 Grade Cu.m. 5340.00 137

Providing and laying ready mix Cement concrete

(RMC) pavement of following grade with 25%

fly Ash of trap / granite / quartzite /gneiss metal

including mixing in ready mix plant of approved

make including transportation of concrete mix for

wearing course , including plywood/steel

formwork, steel centering and compaction by

vibrating using plate, needle and screed vibrator

as required grooming the concrete surface to get

serrations leveling to the surface as directed &

curring etc. complete including use of plastisizers

and retarders as directed by engineer in charge

(excluding cost of reinforcement) Newly laid

concrete shall be covered by gunny bag, plastic,

tarpolin, etc. (Wooden centering / formwork will

not be allowed) as per specification given and

directed by Engineer in charge. Item includes

cement vata in CM 1:8 at 0.60 m x 0.60 m centre

to centre admeasuring 80 mm at bottom and 40

mm at top & depth of 75 mm and maintaining the

same throughout 28 days curring period and

removing the same

thereafter by using light tool without damaging pavement (Including transportation of Concrete mix up to work site & including initial lead of 5.00 Km for raw materials up to plant site).

261


Completed Labour

SR.NO.

& CODE

NO.


c) M-40 Grade Cu.m. 5390.00 137

84 No. 215.00 27.00

As directed by Engineer-incharge.

85 No. 26.00 4.50


Providing and fixing in position mild steel dowel bars precoated with anticorrosive epoxy paint of 32 mm. Dia. 60 cms. Long and at 30.00 cm. C/C & wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position HYSD tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C & wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of HYSD chairs with proper alignment etc. complete.

262


Completed Labour

SR.NO.

& CODE

NO.


86 Rmt. 65.00 18.00


Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

263


Completed Labour

SR.NO.

& CODE

NO.


87 Rmt. 195.00 8.00


Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam back up rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor & allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction & longidudinal joints (15 mm.deep x 8 mm.wide)

282

5(E) PROTECTION WORKS


Completed Labour

Sqm. 144.00 70.00

Spec. No. : Rd. 73 P. No. 246

Sqm. 162.00 72.00

Spec. No. : Rd. 73 P. No.246

Sqm. 220.00 87.00

Spec. No. : Rd. 73 P. No.246

Cum. 380.00 110.00

Spec. No. : Rd. 74 P. No.247

SR.NO. & CODE

NO.


88 RD 73

Providing dry rubble stone pitching 23 cm (about 9" ) thick including all material, labour etc. complete. (Including Royalty charges)( lead to be considered seperately )

89 RD 73


90 RD 73


91 RD 74

Providing dry trap / granite / quartzite/ gneiss rubble stone masonry including all material, labour etc. complete. (Including Royalty charges)( lead to be considered seperately )

283

5(F) ROAD FURNITURE


Completed Labour

No. 660.00 117.00

93 No. 265.00 82.00

RD78 A

94 No. 2800.00 585.00

RD78 A

SR.NO. & CODE

NO.


92 RD

78

Providing and fixing R.C.C. 1:2:4 boundary stone of size (15 X 15 X 90 cm ) including cost of reinforcement @ 100 kg / Cum as per type design including painting, numbering, fixing in standard size (45 X 45 X 75 cm ) C.C. 1:4:8 block etc complete.

Spec. No. : As directed by Engineer - in - charge.

Providing and fixing R.C.C. 1:2:4 200 m. stone of size (15 X 10 X 65 cm ) as per I.R.C. design (IRC 26-1967) including cost of reinforcement @ 100 kg / cum), painting, numbering, fixing in standard size (35 X 30 X 40 cm ) C.C. 1:4:8 block etc complete.


Providing R.C.C. 1:2:4 5'th Km. Stone on S.H. and M.D.R. etc. including cost of reinforcement @ 100 kg / cum), painting, numbering etc. complete as per IRC design (IRC 8-1980) for highway 5th km. Stones and fixing in standard size (55 X 80 X 60 cm ) C.C. 1:4:8 block etc complete.


284


Completed Labour

SR.NO. & CODE

NO.


95 No. 1485.00 350.00

RD80

96 No. 1220.00 290.00

RD81

97 No. 1450.00 600.00

Providing R.C.C 1:2:4 ordinary km. Stones including cost of reinforcement @ 100 kg / cum) painting numbering etc. complete for S.H. way and M.D.R. as per IRC design (IRC 8-1980) for highway km stone and fixing in standard size (63 X 63 X 60 cm ) C.C. 1:4:8 block etc complete.


Providing R.C.C. 1:2:4 ordinary km. stones, for ODR and V.R. including cost of reinforcement @ 100 kg / cum) painting numbering etc. complete as per I.R.C. design (IRC 8-1980) for highway km.stone and fixing in standard size (67 X 50 X 60 cm ) C.C. 1:4:8 block etc complete.


Providing and fixing R.C.C. precast cement concrete M-15 pedestal OF SIZE 0.75 X 0.75 X 0.20 m including cost of steel reinforcement for Km.stone as per detailed drawing and specification including transportation of pedestal Block , all lifts etc. complete.


285


Completed Labour

SR.NO. & CODE

NO.


98 Retro-Reflectorised Traffic Signs

i) 90 cm equilateral triangle Each 3600.00 135.00

ii) 60 cm equilateral triangle Each 2530.00 135.00

iii) 60 cm Circular Each 3240.00 135.00

iv) 80 cm x 60 cm rectangular Each 4340.00 135.00

v) 60 cm x 45 cm rectangular Each 3170.00 135.00

vi) 60 cm x 60 cm square Each 3670.00 135.00

vii) 90 cm high octagon Each 5410.00 135.00

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC: 67 made of high intensity grade sheeting vide clause 801.3 / High intensity Prismatic grade sheeting as per ASTM D 4956, fixed over aluminium sheeting, 2.00 mm thick, duly painted on back side with two coats of grey stove enamel paint & supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 55 cm below ground level as per approved drawing. The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with seven years written warrenty from the manufacture & authorised distributer/convertor,for satisfactory field performance, durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

286


Completed Labour

SR.NO. & CODE

NO.


Spec. No. : M.O.R.T & H 2001 Clause No 801 P.No. 311

287


Completed Labour

SR.NO. & CODE

NO.


99 Direction and Place IndentificationSigns upto 0.9 sqm Size Board.

Sqm. 7430.00 125.00Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 / High intensity Prismatic grade sheeting as per ASTM D 4956, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm,duly painted on back side with two coats of grey stove enamel paint & supported on a mild steel single angle iron post 75 x 75 x 6 mm, 3.5 m long firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 55 cm below ground level as per approved drawing.The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with seven years written warrenty from the manufacture & authorised distributer/convertor,for satisfactory field performance, durability & stipulated

retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Spec. No. :M.O.R.T & H 2001 Clause No 801 P.No. 311

288


Completed Labour

SR.NO. & CODE

NO.


100 Direction and Place IndentificationSigns with size more than 0.9 sqm size board

Sqm. 8450.00 250.00Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of High intensity grade sheeting vide clause 801.3/ High intensity Prismatic grade sheeting as per ASTM D 4956, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm,duly painted on back side with two coats of grey stove enamel paint & supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm,3.5 m long, 2 Nos.properly cross braced with angle iron of size 50x50x5 mm, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 55 cm below ground level as per approved drawing including M.S. angle iron frame for board of size 35x35x3 mm. The angle iron post including bracing shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.

Retroreflective sheeting should be with seven years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

289


Completed Labour

SR.NO. & CODE

NO.


101 Overhead Signs

A) Truss and Vertical Support Tonne 61800.00 1750.00

B) Aluminium Alloy Plate for Over Head signSqm. 5600.00 60.00

Providing and erecting overhead signs with a corrosion resistant 2 mm thick aluminum alloy sheet reflectorised with high intensity retro-reflective sheeting vide clause 801.3/ High intensity Prismatic grade sheeting as per ASTM D 4956, with vertical and lateral clearance given in clause 802.2 and 802.3 duly painted on back side with two coats of grey stove enamel paint and installed as per clause 802.7 over a designed support system of structural steel work trestles and trusses of sections and type as per structural design requirements and approved plans, including painting with one coat of epoxy primer & two coats of epoxy finish paint. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with seven years written warrenty from the manufacture & authorised distributer/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Spec. No. :M.O.R.T & H 2001 Clause No 802 P.No. 316

290


Completed Labour

SR.NO. & CODE

NO.


i. Size 90 cm Triangle Each 2400.00 425.00

ii. Size 60 cm Triangle Each 2000.00 425.00

102 RSC-1

Providing and fixing Cautionary / Warning sign board having shape of an equilateral triangle of 90 / 60 cm sides made out of 16 guage (1.6 mm ) thick mild steel sheet painted with one coat of zinc chromate stoveing primer and two coats of white stove enamel paint and red border on front side and grey stove enamel on back side symbols with cutout of red retroreflective sheeting of engineering grade, including one M.S. angle post of size 65 mm x 65 mm x 6 mm, 3.85 m long duly painted with synthetic enamel paint alternate black and white bands of 25 cm of width including G.I. fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributer/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Spec. No. : As per IRC-67, 1977 & M.O.R.T & H Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994

291


Completed Labour

SR.NO. & CODE

NO.


i. Size 90 cm Diameter Each 2300.00 425.00

ii. Size 60 cm Diameter Each 1900.00 425.00

103 RSC-2

Providing and fixing Mandatory / Regulatory sign board of 60/40 cm diameter made out 16 guage (1.6 mm) thick mild steel sheet painted with one coat of zinc chromate - stoving primer and two coats of white stove enamel paint and red border on front side and grey stove enamel on back side symbols with cutout of red retroreflective sheeting of engineering grade, including one M.S. angle iron post of size 65 mm x 65 mm x 6 mm, 3.65 m long duly painted with synthetic enamel paint alternate black and white bands of 25 cm of width including G.I. fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


292


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 6380.00 1500.00104 RSC-3

Providing and fixing informatory sign boards in square or rectangular shape of any size made out 16 guage (1.6 mm) thick mild steel sheet painted with one coat of zinc chromate-stoveing primer and two coats green stove enamel paint on front side and grey stove enamel on back side and border / message / symbols etc. with cut out of white retroreflective sheeting of engineering grade, including M.S. angle frame of 35 mm x 35 mm x 3 mm and two M.S. angle iron post of size 65 mm x 65 mm x 6mm, 3.65 m long properly cross braced with angle iron of size 50 mm x 50 mm x 5 mm duly painted with alternate black and white bands of 25 cm width including G.I. fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.

This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


293


Completed Labour

SR.NO. & CODE

NO.




105 RSD-1

Providing and fixing Cautionary / Warning sign board having shape of an equilateral triangle of 90 / 60 cm sides made out of 16 guage (1.6 mm) thick mild steel sheet painted with one coat of zinc chromate – stoving primer and two coats of white stove enamel paint and red border symbols etc. back side in grey stove enamel paint including one M.S.angle iron post of size 50 mm x 50 mm x 5 mm, 3.65 m long duly painted with alternate black and white bands of 25 cm width including G.I. fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


294


Completed Labour

SR.NO. & CODE

NO.


i. Size 60 cm Diameter Each 1700.00 425.00ii. Size 40 cm Diameter Each 1400.00 425.00

106 RSD-2

Providing and fixing Mandatory / Regulatory sign boards having 60/40 cm Dia. Made out of 16 guage (1.6 mm) thick mild steel sheet painted with one coat of zinc chromate - stoving primer and two coats of white stove enamel paint and red border symbols etc. back side in grey stove enamel paint including one M.S. angle iron post of size 50 mm x 50 mm x 5 mm, 3.65 m long duly painted with alternate black and white bands of 25 cm width including G.I. fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


295


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 4650.00 1300.00107 RSD-3

Providing and fixing informatory sign boards in

square or rectangular shape of any size made

out 16 guage (1.6 mm) thick mild steel sheet

painted with one coat of zinc chromate - stoving

primer and two coats green back ground white

border/messages, symbols etc. and back side in

grey stove enamel paint including M.S. angle

frame of 35 mm x 35 mm x 3 mm and two

M.S.angle iron post of size 50 mm x 50 mm x 5

mm, 3.65 m long properly cross braced with

angle iron of size 50 mm x 50 mm x 5 mm duly

painted with alternate black and white bands of

25 cm width including G.I.fixtures etc. and fixing

the board in 1:4:8 concrete block of size 60 cm x

60 cm x 75 cm including transportation etc.

complete.The nut bolts of board with angle iron

post/supporting structure after fixing at site has

to be electrically welded.


296


Completed Labour

SR.NO. & CODE

NO.




108 RSC-1

Supplying Cautionary / Warning sign board having shape of an equilateral triangle of 90/60 cm sides made out of 16 guage (1.6 mm) thick mild steel sheet painted with one coat of zink chromate-stoving primer and two coats of white stove enamel paint on front side red border and grey stove enamel on back side symbols with cutout of red retroreflective sheeting of engineering grade ,including transportation etc complete.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


297


Completed Labour

SR.NO. & CODE

NO.




109 RSC-2

Supplying Mandatory / Regulatory sign board having 60/40 cm diameter made out of 16 guage (1.6mm) thick mild steel sheet painted with one coat zinc chromate-stoving primer and two coats of white stove enamel paint and red border on front side and grey stove enamel on back side symbols with cut out of red retroreflective sheeting of engineering grade , including transportation etc complete.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


298


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 2600.00 900.00



110 RSC-3

Supplying informatory sign boards in square of rectangular shape of any size made out of 16 guage thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of green stove enamel paint on front side and grey stone enamel on back side and border / messages / symbols etc. with cut out of white retroreflective sheeting of engineering grade, Including transportation etc complete.Retroreflective sheeting should be with five years written warrenty from the manufacture & authorised distributor/convertor,for satisfactory field performance,durability & stipulated retroreflectance of retroreflective sheeting.This certificate in original should be submitted to the Engineer in charge by the contractor/supplier.


111 RSD-1

Supplying Cautionary / Warning sign board having shape of an equilateral traingle of 90 / 60 cm sides made out of 16 guage (1.6 mm) thick mild steel sheet painted with one coat of zinc cromate-stoving primer and two coats of white background red border and black symbols etc. and back side in grey stove enamel paint etc. complete.


299


Completed Labour

SR.NO. & CODE

NO.


112



Sq.m. 1800.00 900.00

Supplying Mandatory / Regulatory sign board having 60/40 mm diameter made out of 16 guage (1.6 mm) thick mild steel sheet painted with one coat of Zinc cromate-stoving primer and two coats of white background red border / messages and black symbols etc. and back side in grey stove enamel paint etc. complete.


113 RSD-3

Supplying informatory sign boards in square or rectangular shape of any size made out of 16 guage (1.6 mm) thick mild steel sheet painted with one coat of Zinc cromate-stoving primer and two coats of green background white border / message symbols etc. and back side in grey stove enamel paint including transportation etc. complete. (excluding frame)


300


Completed Labour

SR.NO. & CODE

NO.


Rmt. 630.00 117.00

Rmt. 455.00 105.00

114 RSE-1

Supplying rolled steel channel post of 100 x 50 mm (ISMC) drilled on top and painted with one coat of epoxy primer and two coats of epoxy finish paint having black and white bands of 25 cm last part of the post 0.75 m below ground level is painted with three coats of red lead paint with 2 nos. of high tensile G.I. bolt and nut of size 10 mm Dia. of 25 mm long including transportation etc. complete.


115 RSE-2

Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 mm drilled on top and painted with one coat of epoxy primer and two coats of epoxy finish paint having black and white bands of 25 cm, last part of the post 0.75 m below ground level is painted with three coats of red lead paint with 2 nos. of high tensile G.I. bolt and nut of size 10 mm dia. of 25 mm long including transportation etc. complete.


301


Completed Labour

SR.NO. & CODE

NO.


Rmt. 330.00 64.00

Rmt. 280.00 64.00

Rmt. 168.00 64.00

116 RSE-3

Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 mm duly painted with one coat of red oxide paint and two coats of synthetic enamel finish paint having black and white bands of 25 cm width including 2 nos of G.I. bolt and nut of size 10 mm dia. And 20 mm long including transportation etc. complete.


117 RSE-4

Supplying M.S. Angle iron post of size 50 mm x 50 mm x 5 mm duly painted with one coat of red oxide paint and two coats of synthetic enamel finish paint having black and white bands of 25 cm width including 2 nos of G.I. bolt and nut of size 10 mm dia. And 20 mm long including transportation etc. complete.


118 RSE-5

Supplying M.S. Angle iron frame for informatory sign boards of size 35 mm x 35 mm x 3 mm welded and painted with one coat of epoxy primer and two coats epoxy finish paint etc. complete.


302


Completed Labour

SR.NO. & CODE

NO.


Rmt. 159.00 64.00

Each 350.00 55.00

Each 200.00 15.00

Each 130.00 35.00

119 RSE-6

Supplying M.S. Angle iron frame for informatory sign boards of size 35 mm x 35 mm x 3 mm welded and painted with one coat of stoving primer and two coats stove enamel paint etc. complete.


120 RSE-7

A)Providing and fixing aluminium casted CAT EYE STUD of size 10 cm x 10 cm at base with M.S. Zinc coated nails of size 12 mm dia. of 12 cm long having both sides (Dual Direction) high impact ABC 3 Nos. of eyes of 16 mm dia. on both sides containing 7 beads each i.e. 42 beads in retroreflective etc. complete.

B)Providing and fixing raised Pavement Marker with epoxy adhesive conforming to ASTM D 4280 type H, electrically welded Microprismatic lenses 6000 nos. per sq. inch having reflectivity 279, 167, and 69 for white, yellow & red respectively at 0 entrance & 20 degree observation angle etc.complete.


121 RSE-8

Providing and fixing road marker plastic stud made out of ABS plastic having 10 cm dia. And 1 cm height with grooves at the base with G.I. nail of 8 mm dia, 6 cm long, including all leads etc. complete.


303


Completed Labour

SR.NO. & CODE

NO.


Each 1060.00 490.00

123 Sq.m. 330.00 10.00

No. 10.50 2.00

Spec. No. :As directed by Engineer-in-charge.

No. 17.00 11.50


122 RSE-9

Fixing sign board in cement concrete 1:4:8 block of size 0.60 m x 0.60 m x 0.75 m including excavation curing transportation of all materials, all lifts etc. complete.


Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes etc complete.

Spec. No. :M.O.R.T. & H. 2001, Clause No. 803 P. No. 320

124 RD 83

Painting letters upto 20 cm. height including cleaning the surface & painting etc. complete.

125 RD 85

Painting and numbering trees with white back ground and black lettering etc complete. (23 x 23cm)

304


Completed Labour

SR.NO. & CODE

NO.


No. 67.00 27.00


No. 80.00 40.00


No. 11.00 6.50


No. 83.00 46.00


No. 68.00 40.00


126 RD

93 A

Painting with approved enamel paint in two coats including cleaning surface and lettering for CAUTIONARY / MANDATORY SIGN BOARDS etc complete.

127 RD

93 B

Painting INFORMATORY SIGN BOARDS/ VILLAGE NAME BOARDS with approved enamel paint in two coats and lettering including cleaning surface etc. complete.

128 RD

93 C

Painting Nallah flow direction, span no. and location on masonry work with approved enamel paint in two coats including background painting and lettering including cleaning surface etc. complete.

129 RD

93 D

Painting 5th K.M. stone with approved enamel paint in two coats complete and lettering including cleaning surface etc.complete.

130 RD

93 E

Painting Ordinary K.M. stone with approved enamel paint in two coats complete and lettering including cleaning surface etc. complete.

305


Completed Labour

SR.NO. & CODE

NO.


No. 27.00 11.50


No. 6.00 3.60


133

a) over 10 cm. in width (white and yellow) Sq.m. 102.00 28.00b) upto 10 cm. in width Sq.m. 107.00 28.00


No. 23.00 16.50


131 RD

93 F

Painting Two Hundred Metre Stone with approved enamel paint in two coats complete and lettering including cleaning surface etc. complete.

132 RD

93 G

Painting Boundary Stones with approved enamel paint in two coats complete and lettering including cleaning surface etc. complete.

Providing line, dashes, arrows etc. on roads in two coats with ready mixed road marking paint including cleaning the surface of all dirt. dust & other foreign matter demarkation at site and traffic control etc. complete.

134 RD

94

Providing white and colour washing to road side trees in 2 coats in 2 bands of white and one red band at centre of 30cm. height each including preparing the surface, cost of material, conveying etc. complete.

306


Completed Labour

SR.NO. & CODE

NO.


Sq.m. 10.50 5.80


136 Cu.m. 1040.00 290.00


137

By Manual means

a) Bituminous course Cu.m. 465.00 465.00

b) Granular course Cu.m. 315.00 290.00

By Mechanical means Bituminous course Cu.m. 330.00 115.00

135 RD

94

Dressing of side shoulder by mechanical means including excavation of cutting shrubs and bushes spreading the excavated stuff & sectioning to the required line, level and slope etc. complete.

Breaking and removing by mechanical means the existing cement concrete pavement to full width & depth including lean concrete, cutting dowel bars breaking the removed C.C.slab pieces in to 50 to 75mm size, disposing the dismantalled material upto a lead of 50 m etc. complete

Dismantalling of flexible pavements & disposal of dismantalled material upto a lead of 50 meter,stacking serviceable & unserviceable materials seperately including compaction of same with power roller etc. complete.

Spec. No. : M.O.R.T.& H 2001 Clause No 202 P. No. 44

307


Completed Labour

SR.NO. & CODE

NO.


138 No. 210.00 44.00


139 R.Mt. 181.00 103.00


140 Sq.m. 710.00 15.00


Refixing the disturbed guard stone in position and in line with necessary excavation fixing in 1:4:8 c.c. block of size 45 x 45 x 45 cm, ramming etc. complete.

Providing and laying shoulder drain of trap rubble of 0.45 x 0.45 meter section at 450 angle to the road edge including hand packing, filling voids with sand/shingle of approved quality and ramming etc. complete as desired.

Providing and painting with REFLIT RETRO REFLECTIVE PAINT of approved make on New concrete / plastered or any other surfaces after applying two coats of white base coat over road furniture like Kilometer stones, Guard stones, road dividers, kerb stones, Parapet walls, Pipe/ concrete railings, concrete sign boards, Delinators, & also over Electric poles, road side trees, fire hydrants, Crash barriers, Road machineries lying on road sides or any other temporary road marking for delination purpose etc complete ( Including cost of labour, material, transportation and all taxes etc complete.)

308


Completed Labour

SR.NO. & CODE

NO.


141 Sq.m. 655.00 15.00


Providing and painting with REFLIT RETRO REFLECTIVE PAINT of approved make on old concrete / plastered or any other surfaces after applying two coats of white base coat over road furniture like Kilometer stones, Guard stones, road dividers, kerb stones, Parapet walls, Pipe/ concrete railings, concrete sign boards, Delinators, & also over Electric poles, road side trees, fire hydrants, Crash barriers, Road machineries lying on road sides or any other temporary road marking for delination purpose etc complete ( Including cost of labour, material, transportation and all taxes etc complete.)

324

Code Description Unit

1 1 TRAP HEADER (17X22X60 TO 75 CM) APP. 60 CM LONG No. 29.00

2 2 TRAP HEADER APP. 75 CM LONG No. 30.00

3 3 RUBBLE STONE (BLASTED) Cu.m. 185.00

4 4 SAND (SCREENED) Cu.m. 375.00

5 5 CEMENT Bags 240.00

6 7 M. S. BARS OF V/S SIZES M. T. 40300.00

7 8 BINDING WIRES Kg. 62.00

8 9 NAILS Kg. 62.00

9 10 HIGH TENSILE (TOR) STEEL M. T. Deleted

10 10a TMT STEEL M.T. 41300.00

11 15 RUBBLE AT QUARRY ( MASONRY) Cu.m. 195.00

12 18 GRAVEL AT NALLA BED Cu.m. 115.00

13 19 FIRE WOOD Quintal 270.00

14 20 BITUMEN BULK VG 40 (30/40) AT MUMBAI w.e.f. 01/08/2011 M. T. 42015.00

15 20a BITUMEN PACK TIN VG 40 (30/40) AT MUMBAI w.e.f. 01/08/2011 M. T. 45877.00

16 21 BITUMEN BULK VG30 ( 60/70) AT MUMBAI w.e.f. 01/08/2011 M. T. 39634.00

17 21a BITUMEN PACK TIN VG30 ( 60/70) AT MUMBAI w.e.f. 01/08/2011 M. T. 43495.00

18 21b BITUMEN BULK VG10 (80/100) AT MUMBAI w.e.f. 01/08/2011 M. T. 38604.00

19 22 SOLVANT Ltr. 25.00

20 27 GUARD STONE (STD. SIZE) (Stone) No. Deleted

21 28 BOUNDARY STONE (Stone) No. Deleted

22 30 PIN HEADER ( STD. SIZE) (Stone) No. 36.00

23 31 QUARRY SPALLS ( TRAP RUBBLE) Cu.m. 145.00

24 32 TR. HEADER / THROUGH ST. (Stone) No. Deleted

25 33 TR. HEADER (Stone) No. Deleted

26 34 TRAP METAL BLASTED 60 mm. Cu.m. 260.00

27 35 TRAP METAL 60 mm. (UNBLASTED) Cu.m. 260.00

28 36 TRAP METAL 50 MM. (BLASTED) Cu.m. 255.00

29 37 TRAP METAL 50 MM. (UNBLASTED) Cu.m. 280.00

30 38 TRAP METAL 40 MM. (BLASTED) Cu.m. 265.00

31 39 TRAP METAL 40 MM. (UNBLASTED) Cu.m. 280.00

32 40 TRAP METAL 40 MM. (CRUSHED) Cu.m. 560.00



35 43 TRAP METAL 10 MM. / 12 MM (CRUSHED) Cu.m. 395.0036 44 HARD MURUM Cu.m. 125.00

37 45 SOFT MURUM Cu.m. 115.00

7. MATERIAL RATES (Including VAT as applicable)

Sr. No.

Rate For CSR 2011-2012 in Rs. (Including VAT as applicable)

325

Code Description UnitSr. No.



39 49 BRICKS AGGREGATE ( 20 TO 40 MM) Cu.m. 275.00

40 53 STEEL FOR STRUCTURAL WORK M. T. 40500.00

41 54 STEEL PLATES M. T. 44500.0042 54a SAND UNSCREEN FOR BUILDING Cu.m. 300.00

43 55 SAND UNSCREEN FOR ROAD (Nallah Bed) Cu.m. 165.00

44 56 LIME SLAKED ( FINE LIME) Kg. 7.00

45 61 BRICK BATS Cu.m. 525.0046 79 BRICKS ( II CLASS) No. 3.5047 80 BRICKS ( I CLASS) No. 3.75

48 80a FLY ASH BRICKS No. 3.40

49 82 FIRE BRICKS No. 12.00

50 86 KHANDKIES No. Deleted

51 92 CORNER STONES 38X20X30 CM. No. 55.00

52 93 POLI. SHAHABAD (M. CUT 25 MM TH.) Sq. m. 245.00

53 95 ROUGH SHAHABAD (12-20 MM TH.) Sq. m. 150.00

54 97 WATER PROOFING COMPOUND Kg. 80.00

55 98 POLISH SHAHA. FOR STEPS (25 MM.) Sq. m. 340.00

56 99 CHEQ. CEMENT TILES Sq. m. 140.00

57 100 TANDUR POLISHED FOR STEPS Sq. m. 290.00

58 101 NEERU. Kg. 10.00

59 103 KOTA STONE ( MACHINE CUT) 25MM.TH Sq. m. 370.00

60 104 ROUGH SHAHABAD ( 25 TO 30 MM. TH) Sq. m. 165.00

61 105 ROUGH SHAHABAD ( 50 TO 60 MM. TH) Sq. m. Deleted

62 106 ROUGH SHAHABAD ( 40 TO 50 MM. TH) Sq. m. Deleted

63 108 TANDOOR ( HAND CUT) 25 MM. TH Sq. m. 260.00

64 109 TANDOOR 25 MM. TH. (MACHINE CUT) Sq. m. 300.00

65 110 PLAIN CEMENT TILES Sq. m. 150.00

66 111 CEMENT COLOUR TILES Sq. m. 160.00

67 112 WHITE GLAZED TILES 15X15 CM. Doz. 100.00

68 113 WHITE GLAZED TILES 10X10 CM. Doz. 90.00

69 114 WHITE MAKRANA MARBLE SLAB (12mm TO 15mm ) Sq. m. 1500.00

70 114a WHITE MARBLE (12mm TO 15mm ) (Other than Makrana) Sq. m. 1000.00

71 115 MARBLE CHIPS Kg. 9.00

72 116 MARBLE COLOUR POWDER Kg. 11.00

73 117 WHITE CEMENT 750.00

74 118 COLOURED CEMENT Kg. 80.00

75 119 MARBLE MOSAIC CHEQ. TILES(GREY) Sq. m. 220.00

Per 50 Kg. Bag

326



76 122 KADAPPA ( MACH CUT) 25 MM TH. Sq. m. 300.00

77 124 COL. MOZAIC TILES ( GREY CEMENT) Sq. m. 190.00

78 125 MARBLE MOSAIC TILES ( GREY CEMENT) Sq. m. 185.00

79 127 KOTA STONE STEP (POLISHED) Sq. m. 400.00

80 129 COL. MOZAIC TILES ( WHITE CEMENT) Sq. m. 210.00

81 131 CHEQUERED TILES (GRAY CEMENT) Sq. m. 145.0082 138 LINSEED OIL DOUBLE BOLIED Ltr. 80.0083 139 TURPENTINE Ltr. 65.0084 141 FRENCH POLISH Ltr. 160.0085 142 VARNISH Ltr. 135.0086 143 COAL TAR Kg. 45.0087 144 COMERCIAL SPIRIT Ltr. 45.0088 145 WHITE ZINC PAINT Kg. 150.0089 150 ALUMINIUM PAINT Ltr. 220.0090 151 SYNTHETIC PAINT Ltr. 220.0091 152 ENAMEL PAINT / FLAT PAINT Ltr. 220.00

92 154 RED OXIDE PAINT Kg. 120.00

93 155 PLASTIC EMULSION PAINT Kg. 260.00

94 158 COLOUR POWDER (YELLOW EARTH) Kg. 7.00

95 159 WASHABLE DISTEMPER Kg. 80.00

96 160 OIL BOUND DISTEMPER Kg. 90.00

97 163 WATER PROOF CEMENT PAINT Kg. 45.00

98 164 T. W. PLANKS 1.2 M. LENGTH Cu. M. 67000.00

99 175 T. W. PLANKS ABOVE 2.5 M. LENGTH Cu. M. 69000.00

100 177 T.W. PLANK 25 TO 50 MM TH. 10-15 CM Wide Cu. M. 69000.00

101 178 T.W. GIRDER (JOIST) Cu. M. 70000.00

102 180 T.W. PLANKS 20 MM. TH (10-15 CM Wide) Cu. M. 67000.00

103 180a Teak Wood Battens Cu. M. 50000.00104 183 T.W.BULLIES 100 MM DIA Rmt. 135.00

105 184 T.W. BULLIES 125 MM DIA. Rmt. 145.00

106 185 T.W. BULLIES 150 MM DIA. Rmt. 160.00

107 186 JUNGLE WOOD PLANKS & IN GENERAL Cu. M. 27000.00

108 190 G.I. SCREW BOLTS No. 2.50

109 191 G.I. 'J' HOOKS 6 MM. DIA. No. 6.00

110 192 G.I. WASHERS No. 0.60

111 193 MANGLORE TILES CLASS ''A'' No. 9.50

112 196 J.W.BALLIES 150 MM. DIA Rmt. 60.00

113 197 MANGLORE RIDGE/HIP TILES No. 18.00

114 199 G.C.I. SHEETS (CORRUGATED ) 20 BWG. M. T. 60000.00

115 199a G.I.SHEET COLOUR M. T. 62000.00

116 200 G.I. WASHERS Kg. 80.00

327



117 201 G.I.NUT AND BOLTS Kg. 85.00

118 206 STRONG IRON BOLTS 10 MM. DIA. Kg. 90.00

119 208 RIDGE CAP (PLAIN G.I.) M. T. 60000.00

120 210 BITUMINOUS WASHERS Kg. 95.00

121 211 A.C. SHEET RIDGE Pair. 245.00

122 211a Googly Bolt With Bitumenous Washer Kg. 70.00

123 213 MANGLORE GLASS TILE No. 330.00

124 215 A.C. PLAIN SHEET 6 MM. TH. Sq. m. 175.00

125 218 A.C.CORRUGATED SHEET 6 MM. TH. Sq. m. 190.00

126 222 PLAIN A.C. SHEET 4 MM. TH. Sq. m. 140.00

127 223 HARD BOARD 6 MM. TH. Sq. m. 140.00

128 224 PLY WOOD 12 MM. TH. Commertial Sq. m. 360.00

129 225 PLY WOOD 6 MM. TH. Commertial Sq. m. 275.00

130 225a PLY WOOD 4 MM. TH. Commertial Sq. m. 155.00

131 226 PARTICAL BOARD (12 MM.TH.) Sq. m. 350.00

132 226a Marine Ply 12 mm Sq. m. 500.00

133 226b Marine Ply 6 mm Sq. m. 360.00

134 226c Marine Ply 4 mm Sq. m. 230.00

135 227 INDIAN SUPERIOR T. W. FRAME Cum 80000.00

136 228 IRON HOLD FAST 300X40X5MM No. 40.00

137 229 BUTT HINGES ALUMINIUM 75 MM No. 50.00



140 232 TOWER BOLT ALUMINIUM 150 MM No. 45.00



143 235 HANDLE ALUMINIUM 125 MM. No. 45.00

144 236 HANDLE AND EYES ALUMN. 225 MM No. 28.00

145 239 GLASS 5.5 MM. THICK (PLAIN) Sq. m. 450.00

146 241 HANDLE IRON OXI. 100 MM. No. 27.00

147 242 TOWER BOLT 150 MM. IRON No. 27.00

148 243 HOOK & EYE IRON OXI. 75 MM No. 16.00

149 245 HANDLE IRON OXI. 125 MM No. 32.00

150 246 HOOKS AND EYES 225 MM IRON OXI No. 17.00

151 247 MORTICE LOCK SUPERIOR No. 600.00

152 248 SLIDING DOOR BOLT (TADI) No. 60.00

153 249 ALDROP ALUMINIUM 300 X 16 MM No. 165.00

154 250 BUTT HINGES IRON OXI. 125 MM No. 30.00

155 251 BUTT HINGES IRON OXI.100 MM No. 27.00

156 252 BUTT HINGES IRON OXI. 90 MM No. 20.00

328



157 253 ALDROP IRON OXI. 300 MM (20 MM DIA.) No. 110.00

158 254 IR. OXI. TOWER BOLT 150 MM. No. 60.00

159 255 TOWER BOLT IRON OXI. 250 MM. No. 75.00

160 256 TOWER BOLT IRON OXI.200 MM No. 65.00

161 257 LATCH 250 MM LONG IRON OXI. No. 40.00

162 258 BLACK HINGES No. 10.00

163 259 STR. BUTT HINGE BR.OXI 150 MM. No. 70.00

164 260 STR. STRAP HINGE BR.OXI 200 MM. No. 80.00

165 261 STR. BUTT HINGE BR.OXI 100 MM. No. 60.00

166 262 TOWER BOLT IRON OXI.300 MM No. 90.00

167 263 CHAIN AND STARLE IRON No. 30.00

168 264 BR.OXI, TOWER BOLT 250 MM. No. 175.00

169 265 IRON OXI. STRAP HINGE No. 27.00

170 266 B.R. ORNAMENTAL HANDLE No. 170.00

171 269 HANDLE FOR STEEL WINDOWS No. 30.00

172 272 SOLID CORE T.W. VENEER 35 MM Sq. m. 1250.00

173 273 BRASS DOUBLE ACTING SPRING HINGES No. 125.00

174 274 SOLID CORE (COMME)SHUTTER 35 MM Sq. m. 1000.00

175 276 X.P.M. 12 MM X 18 GAUGE Sq. m. 120.00

176 277 HANDLE IRON OXI.150 MM No. 35.00

177 278 STOPPER FOR STEEL WINDOW No. 33.00

178 279 FLY PROOF G.I. WIRE MESH Sq. m. 170.00

179 288 HAMP ROPE Kg. 70.00

180 292 FERRUL FOR C.I. PIPE 100 MM No. 125.00

181 293 COUPLING C.I.80 MM. No. 120.00

182 294 COUPLING CAST IRON 100 MM No. 130.00

183 296 BELL MOUTH COVER (100 MM) DIA No. 60.00

184 304 CLAMP FOR G.I. PIPE No. 7.00

185 310 C.I.COVER 45X30 CM. WITH FRAME No. 700.00

186 319 BIB STOP TAP BR. HEAVY 15 MM. No. 175.00



189 322 SOCKET FOR 15 MM. TAP No. 13.00



192 326 WHEEL STOP TAP OF BRASS 15 MM No. 200.00



195 331 GUN M. STOP TAP & CR. WH. 20 MM No. 200.00

196 332 GUN M. STOP TAP & CR.WH 25 MM No. 240.00

329



197 334 SHOWER ROSE CHR PLATED BR 10 CM No. 220.00

198 340 BALLCOCK 15 MM. DIA. P.V.C. FLOAT No. 155.00

199 341 BALLCOCK 25 MM. DIA. P.V.C. FLOAT No. 245.00

200 348 W.C. PANS 63 CM. Indian Closet WITH TRAP No. 550.00

201 349 10 LTR. FLU. TANK WITH ACCESSORIES (CI) No. Deleted

202 350 FOOT REST CHEQUERED 25 X 10 CM Pair. 110.00

203 352 W.C. PAN 63 CM. IST CL(ORISA) No. 850.00

204 353 W.C. PAN 63 CM (ORRISA TYPE) CM. IST CLASS WITH TRAP No. 950.00

205 354 HALF STALL TYPE URINAL No. 1650.00

206 356 LIPPED TYPE URINAL No. 500.00

207 357 HALF ROUND E.W. PIPE 100 MM. Rmt. 40.00

208 358 WASH BASIN (45X30 CM COL. GLAZE) No. 620.00

209 359 W/GLAZED E.W.SINK 0.600.2X0.45 with acc. No. 1575.00

210 360 15 MM DIA CRO.PLATED BIB COCK No. 180.00

211 362 WHITE GLAZED W.H. BASIN 0.45X0X0.3X0.2 No. 575.00

212 366 A.C.RAIN WATER PIPE 75 MM. DIA Rmt. 60.00

213 367 BIB TAP 15 MM BRASS MEDIUM No. 130.00

214 368 BIB TAP 15 MM CAST IRON No. 60.00

215 369 C.I. COWL/VENT 75 MM. DIA No. 225.00



218 372 C.I.COLLER 75 MM. DIA No. 185.00

219 373 C.I.COLLER 100 MM.DIA No. 200.00

220 374 C.I.COLLER 150 MM. DIA No. 275.00

221 375 G.I.PIPE 15 MM. DIA MEDIUM TYPE Rmt. 120.00

222 376 G.I.PIPE 20 MM. DIA MEDIUM Rmt. 145.00








230 384 EUROPEAN TYPE W.C. PAN 68 C.M. (WHITE) No. 1150.00

231 393 C.I.GRATING 75 MM. DIA No. 40.00

232 394 C.I.GRATING 100 MM. DIA No. 45.00

233 395 A.C. PIPE 100 MM. DIA Rmt. 55.00

234 396 A.C. PIPE 75 MM.DIA. SHOE No. 45.00

330



235 397 SALT GLAZED S.W. GULLY TRAP No. 110.00

236 398 STONE WARE PIPE 100 MM. DIA Rmt. 80.00

237 407 U.P.V.C.PIPE 15 MM. DIA.10kGF/Cm2 PRESSURE Rmt. 45.00







244 413B U.P.V.C.PIPE 75 MM. DIA.10kGF/Cm2 PRESSURE Rmt. 215.00

245 413C U.P.V.C.PIPE 90 MM. DIA.10kGF/Cm2 PRESSURE Rmt. 275.00

246 414 COLOUR EUROPEAN TYPE W.C. PAN No. 1250.00

247 415 COLOUR WASH H.BASIN 45 CM X 30 CM No. 800.00

248 420 GUN. M. STOP COCKS 15 MM CL. WHEEL No. 165.00

249 422 BRASS WHEEL STOP TAP 32 MM. DIA No. 450.00

250 424 BRASS WHEEL STOP TAP40 MM. DIA No. 475.00




254 432 GUN METAL STOPCOCK C. WHEEL 20 MM No. 350.00



257 442 WH. GL. FULL STALL URINAL No. 3000.00

258 446 WH. GL. WASH BASIN 63 X 45 CM. No. 840.00

259 447 COL. GL. WASH BASIN 63 X 45 CM. No. 1200.00

260 456 C.I.Y. JUNCTION 75 MM DIA No. 240.00



263 459 A. C. COLLER No. 24.00

264 460 C.I. PLUG BENT 150 MM DIA No. 875.00

265 461 A.C. DOUBLE 'Y' JUNCTION 100 MM No. 80.00



268 464 A.C. PIPE 150 MM DIA. Rmt. 75.00

269 465 A. C. PLUG BEND 150 MM DIA. No. 80.00

270 466 STONE WARE PIPE 150 MM DIA. Rmt. 135.00

271 467 STONE WARE PIPE 225 MM DIA. Rmt. 175.00

272 591 COL. GLAZED TILES 15 X 15 CM. Doz. 150.00

273 597 ALLUMINIUM ROD 25 MM DIA. Rmt. 45.00

274 598 VENEER 4 MM THICK T.W. Sq. M. 375.00

331



275 602 WIRED GLASS 6 MM THICK Sq. M. 525.00

276 603 C. I. PIPE 75-80 MM. DIA. Rmt. 600.00

277 604 C. I. PIPE 100 MM DIA. Rmt. 725.00

278 605 C. I. PIPE 150 MM DIA. Rmt. 1100.00

279 622 GULLY TRAP COVER WITH FRAME C.I. No. 165.00

280 626 A. C. SHOE 100 MM. DIA No. 55.00

281 628 A. C. COWL. VENT. ( 100 MM DIA.) No. 50.00

282 630 A. C. BEND 75 MM No. 45.00

283 631 A. C. BEND 100 MM No. 48.00

284 632 C. I. BEND 100 MM No. 280.00

285 635 No. 150.00

286 641 HINGES 125 MM Cromium Plated No. 50.00

287 642 TOWER BOLTS 300 MM CR. PLATED (IRON) No. 65.00

288 643 TOWER BOLTS 200 MM. CR. PLATED (IRON) No. 50.00

289 644 ALDROP 300 X 16 MM CR. PLATED No. 145.00

290 645 HANDLE 125 MM CR. PLATED No. 50.00

291 647 HOOKS AND EYES CR. PLATED No. 27.00

292 648 BR. OXI. BUTT. HINGES 125 MM No. 75.00

293 649 BR. OXI. ALDROP 300 X 16 MM. No. 350.00

294 650 BR. OXI. HANDLES 125 MM No. 85.00

295 651 BR. OXIDE TOWER BOLTS 300 MM No. 200.00

296 652 BR. OXI. TOWER BOLTS 200 MM No. 150.00

297 653 BR. OXI. HOOKS AND EYES 200 MM No. 55.00

298 655 BR. OXI. HINGES 100 MM. No. 70.00

299 656 HINGES IRON 100 MM No. 25.00

300 659 WELDED MESH 50 X 50 X 2.54 MM (10 GAUGE) Sq. M. 280.00

301 663 BARBED WIRE Kg. 63.00

302 664 BAMBOO 50 MM DIA. Rmt. 27.00

303 665 COIR STRING Kg. 45.00

304 666 BAMBOO 25 MM DIA. Rmt. 17.00

305 708 RED POWDER / GERU Kg. 11.00

306 719 NON TEAK / JUNGLE WOOD Cu. M. 26000.00

307 721 CHICKEN PROOF JALI Sq. M. 35.00

308 755 CEMENT BASE PUTTY Kg. 45.00

309 801 T. W. PARTICLE BOARD, BOTH FACE LAMINATED 12MM Sq. M. 650.00

310 837 A. C. COWL. DOME 3" (75 MM) DIA. No. 30.00

311 838 A. C. COWL. DOME 4" (100 MM) DIA. No. 40.00

SYMET BATH FITTINGS. 312 839 WASTE COUPLING 31/32 MM (H/T/F/T) No. 60.00

TOWEL ROD WITH CLAMPS ( 16MM DIA) Cromium Plated 60 CM

332



313 840 GRATING DOOM 100 MM No. 35.00

314 841 GRATING DOOM 125 MM No. 40.00

315 842 GRATING DOOM WASTE HOLE 125 MM No. 38.00

316 843 GRATING ROUND 140 MM No. 55.00

317 844 GRATING SQUARE 150 MM No. 105.00

318 845 GRATING SQUARE WASTE HOLE 150 MM No. 105.00

319 846 GRATING SQUARE FITTINGS 100 MM No. 85.00

320 847 GRATING SQUARE 150 MM No. Deleted

321 848 BIBCOCK STANDARD 15 MM. No. 115.00

322 849 BIBCOCK FANCY WITH FLANGE 15 MM No. 170.00

323 850 BIBCOCK LONG BODY WITH FLANGE 15 MM No. 200.00

324 851 FLANGE 15 MM No. 18.00

325 852 EXTNSION NIPPLE 15 MM No. 28.00

326 853 PILLAR COCK 15 MM No. 240.00

327 854 PUSHCOCK ( 20 MM FEMALE THREADS) 15 MM. No. 145.00

328 855 PUSHCOCK (-DO-) WITH NIPPLE 15 MM No. 130.00

329 856 PUSHCOCK ( 15 MM FEMALE THREADS) 10 MM No. 90.00

330 857 STOPCOCK (15 MM MALE / FEMALE) 15 MM. No. 130.00

331 858 STOPCOCK (FEMALE THREAD) 20 MM. No. 135.00

332 859 PRESSURE FLUSH COCK ( HEAVY) No. 400.00

333 860 ANGLE STOP COCK WITH FLANGE 15 MM No. 160.00

334 861 CONCEALED STOPCOCK 15 MM No. 240.00

335 862 CONCEALED STOPCOCK 20 MM No. 260.00

336 863 BALLCOCK COMPLETE WITH EPOXY 15 MM No. 160.00

337 864 BALLCOCK COMPLETE – DO- 20 MM No. 180.00

338 865 BALLCOCK COMPLETE – DO- 25 MM No. 350.00

339 866 SWIVELLING SHOWER 15 MM No. 140.00

340 867 SHOWER ARM WITH FLANGE 225 MM No. 90.00

341 868 URINAL SPREADER 15 MM No. 120.00

342 869 MORTICE LOCK HANDLE No. 155.00

343 870 BUTT HINGE (3") 75X60 MM No. 35.00

344 871 BUTT HINGE (4")100X75 MM No. 48.00

345 872 REFLEX HINGE L & R (3')75X69 MM No. 40.00

346 873 TOWER BOLT (4 ") 100 MM No. 38.00

347 874 TOWER BOLT (6 ") 150 MM No. 45.00

348 875 TOWER BOLT (8 ") 200 MM No. 55.00

349 876 UPVC SANITORY GRADE PIPE 75 MM Rmt. 145.00



333



Cast Iron Spigot Socket Pipe I.S. 1536 / 1989 Class LA

352 879 80 mm Dia Rmt. 650.00

353 880 100 mm Dia Rmt. 800.00354 881 125 mm Dia Rmt. 950.00355 882 150 mm Dia Rmt. 1250.00

356 883 200 mm Dia Rmt. 1900.00357 884 250 mm Dia Rmt. 2300.00

358 885 300 mm Dia Rmt. 3000.00

359 886 CERAMIC TILES 300mm x 300mm Sqm 450.00

360 887 No. 1850.00

361 888 PVC FLUSHING TANK 10 LIT. CAPACITY WITH ACCE. No. 600.00

362 889 L.D.O Litre 57.00363 890 Vetrified Tiles 600 mm x 600 mm, 8 mm thick Sqm 850.00364 891 Vetrified Tiles 900 mm x 900 mm, 10 mm thick Sqm 950.00365 892 Gypsum Board 9 mm Thick Sqm 250.00

892a Gypsum Board 12.5 mm Thick Sqm 260.00366 893 P.O.P. Celling Sheet 12.5 mm Thick Sqm 150.00367 894 Plasticizer Litre 70.00368 895 Super Plasticizer Litre 90.00369 896 Iron Oxidised Parliamentry Hinges size 75 mm x 150 mm No. 36.00

370 897 Iron Oxidised Parliamentry Hinges size 100 mm x 150 mm No. 43.00

371 898 Iron Oxidised Parliamentry Hinges size 125 mm x 150 mm No. 50.00

372 899 Brass Oxidised Parliamentry Hinges size 75mm x 150 mm No. 140.00

373 900 Brass Oxidised Parliamentry Hinges size 100 mm x 150 mm No. 160.00

374 901 Brass Oxidised Parliamentry Hinges size 125 mm x 150 mm No. 175.00

375 902 Glass 3.0 MM. THICK ( plain ) Sqm. 250.00

902a Glass 4.0 MM. THICK ( plain ) 310.00902b Glass 5.0 MM. THICK ( plain ) 375.00902c Glass 6.0 MM. THICK ( plain ) 490.00902d Glass 8.0 MM. THICK ( plain ) 700.00902e Glass 10.0 MM. THICK ( plain ) 875.00

376 903 Glass 3.0 MM. THICK ( Bajri ) Sqm. 225.00377 904 Emulsion water based (water proof cement paint) Litre 155.00378 905 Stone Dust Cu. M. 185.00379 906 FLY ASH M. T. 35.00380 907 ANGLO INDIAN TYPE W.C.PAN NO. 1350.00381 908 WATER JET WITH PIPE FOR W.C. S.S. NO. 450.00382 909 BIB COCK SWAN NECK LONG HEADED FOAM FLOW NO. 600.00383 910 SUNMICA 0.8MM Sqm 130.00

STAINLESS STEEL SINK 600MM X 450MM X 250MM (1 mm Thick ) WITH ACCE.

334



384 911 FOURMICA 1MM Sqm 350.00385 912 ADDESIVE (FEVICAL) KG 120.00386 913 BAISON BOARD 8 MM Sqm 250.00

913a BAISON BOARD 12 MM Sqm 375.00387 914 GRADE-I CRUSHED METAL (45 MM TO 90 MM) Cu. M. 450.00388 915 GRADE-II CRUSHED METAL (45 MM TO 63 MM) Cu. M. 450.00389 916 GRADE-III CRUSHED METAL (22.5 MM TO 53 MM) Cu. M. 490.00

334

8. LABOUR RATESCode Description Unit

1 1 BLACK SMITH WITH TOOLSM II CLASS DAY 240.00

2 2 STONE CUTTER WITH TOOLS, SEMI-SKL DAY 240.00

3 3 MASON I ST CLASS SKILLED DAY 244.00

4 4 MASON II ST CLASS SKILLED DAY 240.00

5 5 CARPENTER I ST. CLASS SKILLED DAY 244.00

6 6 CARPENTER II ST. CLASS SKILLED DAY 240.00

7 7 PLUMBER WITH TOOLS, SKILLED. DAY 240.00

8 8 GLAZIER WITH TOOLS SKILLED. DAY 240.00

9 9 TIN SMITH WITH TOOLS, SEMI-SKL. DAY 240.00

10 10 PAINTER I ST. CLASS, SKILLED. DAY 244.00

11 11 PAINTER II ST. CLASS, SKILLED. DAY 240.00

12 12 HEAD FITTER WITH TOOLS SKILLED. DAY 244.00

13 13 MECHANIC. DAY 244.00

14 14 LORRY DRIVER / MIXER OPERATOR DAY 244.00

15 16 WELDER/DRILLER, SKILLED. DAY 244.00

16 17 POLISHMAN, SEMISKILLED DAY 240.00

17 18 ASSISTANT PLUMBER, SKILLED DAY 244.00

18 21 VIBRATOR OPERATOR (SKILLED) DAY 244.00

19 24 ASPHALT SPRAYER SKILLED. DAY 244.00

20 26 QUARRY MAN, SEMI SKILLED. DAY 240.00

21 27 PAINTER (WHITE WASHER),SEMI SKILLED. DAY 240.00

22 29 TILE TURNER, SEMI SKILLED DAY 240.00

23 31 BAR BENDER, SKILLED. DAY 244.00

24 32 BHISTI (MIXING/CURING), SEMI-SKILLED. DAY 240.00

25 34 TAR HANDLER, SEMI SEMI-SKILLED. DAY 240.00

26 37 NAVAGHANI DAY 236.00

27 38 MAZDOOR, UNSKILLED HEAVY DAY 236.00

28 39 MAZDOOR, UNSKILLED LIGHT./ FEMALE DAY 236.00

29 41 FITTER I ST. CLASS WITH TOOLS SKILLED. DAY 244.00

30 42 FITTER II ST. CLASS WITH TOOLS SKILLED. DAY 240.00

31 55 WELDER DAY 240.00

32 59 ELECTRICIAN DAY 240.00

33 62 WATCHMAN DAY 240.00

34 64 SUPERVISOR DAY 240.00

Sr. No.

Rate For CSR 2011-

2012 in Rs.

335

LEAD IN K.M.

0.5 68.001 75.00

1.5 82.002 89.50

2.5 96.503 103.50

3.5 110.504 118.00

4.5 125.005 132.00

5.5 138.506 145.00

6.5 152.007 158.50

7.5 165.008 171.50

8.5 178.009 185.00

9.5 191.5010 198.00

10.5 203.5011 209.00

11.5 215.0012 220.50

12.5 226.0013 231.50

13.5 237.0014 243.00

14.5 248.5015 254.00

15.5 259.0016 264.50

16.5 269.5017 275.00

17.5 280.0018 285.00

18.5 290.5019 295.50

19.5 301.0020 306.00

20.5 311.0021 315.50

21.5 320.5022 325.00

22.5 330.00

9. RATES FOR TRANSPORTATION OF METAL FOR YEAR 2011

- 2012 ( Including Service Tax )RATES FOR 2011-2012 in Rs.

336

LEAD IN K.M. RATES FOR 2011-2012 in Rs.

23 335.0023.5 339.50

337

LEAD IN K.M. RATES FOR 2011-2012 in Rs.

24 344.5024.5 349.0025 354.00

25.5 358.5026 363.00

26.5 367.0027 371.50

27.5 376.0028 380.50

28.5 385.0029 389.00

29.5 393.5030 398.00

NOTE :- Rs.7.55/- PER KM/CUM.

Rs. 5.95/-PER KM/CUM.

Rs.5.45/-PER KM/CUM.

4. RATE FOR TRANSPORTATION OF R.C.C. PIPES AND COLLERS.

I] Lead upto 15 km. Rs.18.15 Per KM./MT

II] Lead from 15 km to 50 km. Rs.12.75 Per KM./MTIII] Beyond 50 km. Rs.10.80 Per KM./MT

5. RATE FOR TRANSPORTATION OF BITUMENRs. 3.20 Per KM./MT upto 100 KM & Above

Rs. 6.25 Per KM./MT

Rs. 135.00 Per MT

1. AFTER KM. 30 ADD FOR EACH SUBSEQUENT KM FROM KM 30/0 to km. 60/0

2. ADD FOR EACH SUBSEQUENT KM FROM KM 60/0 TO KM. 100/0

3. ADD FOR EACH SUBSEQUENT KM FROM KM 100/0 AND ABOVE

Note :-Above Rate of transportation of pipe and collers do not include loading and unloading charges.

Transportation of Max phalt pack tin. Same as per rates for transportation of metal for store delivery only. For delivery of pack tin from refinery.

Transportation of Bulk Bitumen from refinery.

6. Heating and unloading bulk bitumen.

337

Sr.No. Materials Unit

(in Rs.) (in Rs.) (in Rs.)

1 Cu.M. 18.00 15.00 9.00

2 Cu.M. 18.00 15.00 9.00

3 Cu,.M. 15.00 14.00 6.00

4 Lime Cu.M. 21.00 16.00 7.00

5 Sq.M. 0.95 0.95 0.90

6 M.T. 17.00 15.00 4.00

7 Cement M.T. 26.00 19.00 12.00

8 M.T. 32.00 26.00 16.00

9 Timber Cu,M. 19.00 14.00 7.00

10 M.T. 21.00 16.00 9.00

10-A --- --- ---

10-B M.T. --- --- ---

10. RATES FOR LOADING , UNLOADING, STACKING AND TRANSPORTATION OF MATERIALS FOR THE YEAR 2011-2012

Rates for Loading carriage of materials upto a lead of 50 Mtrs.

Rates for Unloading including carriage of materials up to a lead of 50 Mtrs.

Rates for Stacking

Rates for Transportation

Boulders Rubbles & Masonry stones

10% Extra over the rates for Transportation of metal

Metal of all sizes

As per schedule attached

Moorum Sand Earth & Loose material

15% Below the rates for Transportation of metal


Shahabad/ Sikosa

1/5 of the the rates for Transportation of metal

Fuel Wood (Babul)

1/2 of the rates for Transportation of metal

10% Below the rates for Transportation of metal for delivery other than factory and Railway station.

Mild Steel bars of all sizes.



Maxphal Pack Tin

Carting of bulk Bitumen Bituminous & Metal mix (mix material) transportation


338

Sr.No. Materials Unit

(in Rs.) (in Rs.) (in Rs.)

Rates for Loading carriage of materials upto a lead of 50 Mtrs.

Rates for Unloading including carriage of materials up to a lead of 50 Mtrs.

Rates for Stacking

Rates for Transportation

11 Bricks Cu.M. 16.00 16.00 11.00

12 18.00 16.00 13.50

13 18.00 16.00 13.50

14 18.00 16.00 13.50

15 A.C.sheets M.T. 20.00 16.00 8.00

16 Bamboos 36.00 26.00 23.00

17 Rmt. 0.25 0.25 0.25

18 Gravel Cu.M. 9.00 7.00 5.00

19 Steam Coal M.T. 20.00 15.00 7.00

20 G.I.Sheets M.T. 19.00 15.00 7.00

21 M.T. 40.00 31.00 7.00

Same as per rates for Transportation of metal

Manglore tiles including Ridgeing and Hipping

1000 Nos


Single Allahbad tiles and country tiles

1000 Nos


Flooring Tiles size 0.30m x 0.30 m

1000 Nos



1000 Nos

1.5 Times the rates for Transportation of metal

Ballies of all Diameters

1/10th time the rates for Transportation of metal

5% Extra over the rates for Transportation of metal

Same as the rates for Transportation of metal


R.C.C.Pipes and Collers

339

11. Machinery Hire Charges For CSR 2011-2012

DESCRIPTION UNIT

1 Power Roller (8 to 10 mt.) Hour 466.00

2 Water Tanker (7.5 Ton) Cap. Hour 470.00

3 Vibrator (Diesel) Hour 109.00

3 (I) Vibrator (Electrical) Hour 103.00

4 Concrete Mixer (10/7 cft.) Hour 170.00

5 Asphalt Mixer 7/5. Cft. Hour 252.00

6 Boiler (Asphlat) C 1125 Lit Hour 16.00

7 Air Compressor 210 cfm. To 225 c. Hour 570.00

8 Guniting Gun. Hour 184.00

9 Rent for Steel Water Tank.( 3000 Liter capacity ) Day 250.00

10 Bouser (7.5 M.T.) K.M. 36.00

11 Paver Finisher (H.P. 400 to 43.5) Hour 892.00

12 Hotmix plant (30 to 40 t.) (excluding heating) Hour 2408.00

13 Heating charges for H.M. plant. Hour 2156.00

14 Crusher (Major stone crusher 16"x10") Hour 506.00

15 Tile Polishing Machine with Polishman. Day 540.00

16 Welding Machine (Diesel Welding Plant)-30 HP Hour 238.00

17 Chain and Pully Day 159.00

18 Rotary core Driller Machinary Day 740.00

19 Pile boring machinary 325 – 400 mm. Dia. Running meter 106.00

20 Builder hoist (1 ton. Cap) Hour 196.00

21 Water Pump 10 to 19 H.P. Hour 177.00

22 Rent of generator set 21 to 30 KVA Hour 325.00

23 Rent of Crane (12.5 M.T. capacity) Hour 791.00

24 Maxi. Mix Vibratory Earth Rammer (4 H.P.) Hour 113.00

25 Dumper/Tipper (6 Cum.cap.) Hour 1045.00

26 Mechanical Sprayer. M.T. 968.00

27 Excavator Hind Marin, 101 M capacity 2.3 cum. Hour 2301.00

28 Motorgrader BEML GD-605 R-1 Hour 1328.00

Sr.No.

Rate For CSR 2011-2012 in Rs.

340

DESCRIPTION UNITSr.No.

Rate For CSR 2011-2012 in Rs.

29 Bouzer heating( asphalt) M.T. 135.00

30 Self propelled paver finisher H.P. 40 & 43.5 Hour 892.00

31 Truck for roller transport (10-12 M.T.) K.M. 47.60

32 Truck (7.5 M.T.) K.M. 47.60

33 Hot Mix mini plant (H.P. 14) Hour 852.00

34 Tractor (Kirloskar D 600 CK.) Hour 430.00

35 Loaders (H.P. 62) Hour 1116.00

36 Poclain LC-80 (Cap. 0.9/0.95 cum. H.P. 90) Hour 2037.00

37 JCB - 3 C. (Cap 1.2 cum.) Hour 1116.00

38 Drawn Scraper Hour 191.00

39 L & T. Sismopactor TT. 900 Vibratory Roller Hour 1267.00

40 Maxi mix Vibratory Road Roller Hour 375.00

41 Pavement Braker Hour 253.00

`

341

12. CEMENT CONSUMPTION

1 C.C. 1:4:8 3.40 bag/cum

2 C.C. M-10 /1:3:6 4.40 bag/cum

3 C.C.M-15/ 1:2:4 6.27 bag/cum

4 C.C. M-20 7.10 bag/cum

5 C.C. M-25 7.50 bag/cum

6 C.C. M-30 8.00 bag/cum

7 C.C. M-35 8.30 bag/cum

8 C.C. M-40 8.50 bag/cum

The standard rate of consumption of Cement for different grades of concrete considered in schedule of rates

342

13. APPROVAL TO CSR 2011-12

PUBLIC WORKS REGION NAGPUR

The Schedule of Rates is approved for the year 2011-2012with effect from 01 /09/ 2011

Sd/- Sd/-Superintending Engineer Superintending Engineer

Public Works Circle Vigilance & Quality Control Circle Nagpur Nagpur

Sd/- Sd/-Superintending Engineer Superintending Engineer

Special Project Circle Public Works Circle Nagpur Chandrapur

Sd/- Sd/-Superintending Engineer Dy. Chief Architect

Design Circle Public Works Region,Nagpur Nagpur.

TRUE COPY

Dy.Executive EngineerRoad project Division

Nagpur

Code Description Unit

1 1 TRAP HEADER (17X22X60 TO 75 CM) APP. 60 CM LONG No.

2 2 TRAP HEADER APP. 75 CM LONG No.

3 3 RUBBLE STONE (BLASTED) Cu.m.

4 4 SAND (SCREENED) Cu.m.

5 5 CEMENT Bags

6 7 M. S. BARS OF V/S SIZES M. T.

7 8 BINDING WIRES Kg.

8 9 NAILS Kg.

9 10 HIGH TENSILE (TOR) STEEL M. T.

10 10a TMT STEEL M.T.

11 15 RUBBLE AT QUARRY ( MASONRY) Cu.m.

12 18 GRAVEL AT NALLA BED Cu.m.

13 19 FIRE WOOD Quintal

14 20 BITUMEN BULK VG 40 (30/40) AT MUMBAI w.e.f. 01/08/2011 M. T.

15 20a BITUMEN PACK TIN VG 40 (30/40) AT MUMBAI w.e.f. 01/08/2011 M. T.

16 21 BITUMEN BULK VG30 ( 60/70) AT MUMBAI w.e.f. 01/08/2011 M. T.

17 21a BITUMEN PACK TIN VG30 ( 60/70) AT MUMBAI w.e.f. 01/08/2011 M. T.

18 21b BITUMEN BULK VG10 (80/100) AT MUMBAI w.e.f. 01/08/2011 M. T.

19 22 SOLVANT Ltr.

20 27 GUARD STONE (STD. SIZE) (Stone) No.

21 28 BOUNDARY STONE (Stone) No.

22 30 PIN HEADER ( STD. SIZE) (Stone) No.

23 31 QUARRY SPALLS ( TRAP RUBBLE) Cu.m.

24 32 TR. HEADER / THROUGH ST. (Stone) No.

25 33 TR. HEADER (Stone) No.

26 34 TRAP METAL BLASTED 60 mm. Cu.m.

27 35 TRAP METAL 60 mm. (UNBLASTED) Cu.m.

28 36 TRAP METAL 50 MM. (BLASTED) Cu.m.

29 37 TRAP METAL 50 MM. (UNBLASTED) Cu.m.

30 38 TRAP METAL 40 MM. (BLASTED) Cu.m.

31 39 TRAP METAL 40 MM. (UNBLASTED) Cu.m.

32 40 TRAP METAL 40 MM. (CRUSHED) Cu.m.



35 43 TRAP METAL 10 MM. / 12 MM (CRUSHED) Cu.m.36 44 HARD MURUM Cu.m.

37 45 SOFT MURUM Cu.m.38 46 TRAP METAL 6 MM. (CRUSHED) Cu.m.

39 49 BRICKS AGGREGATE ( 20 TO 40 MM) Cu.m.

7. MATERIAL RATES (Including VAT as applicable)

Sr. No.


40 53 STEEL FOR STRUCTURAL WORK M. T.

41 54 STEEL PLATES M. T.42 54a SAND UNSCREEN FOR BUILDING Cu.m.

43 55 SAND UNSCREEN FOR ROAD (Nallah Bed) Cu.m.

44 56 LIME SLAKED ( FINE LIME) Kg.

45 61 BRICK BATS Cu.m.46 79 BRICKS ( II CLASS) No.47 80 BRICKS ( I CLASS) No.

48 80a FLY ASH BRICKS No.

49 82 FIRE BRICKS No.

50 86 KHANDKIES No.

51 92 CORNER STONES 38X20X30 CM. No.

52 93 POLI. SHAHABAD (M. CUT 25 MM TH.) Sq. m.

53 95 ROUGH SHAHABAD (12-20 MM TH.) Sq. m.

54 97 WATER PROOFING COMPOUND Kg.

55 98 POLISH SHAHA. FOR STEPS (25 MM.) Sq. m.

56 99 CHEQ. CEMENT TILES Sq. m.

57 100 TANDUR POLISHED FOR STEPS Sq. m.

58 101 NEERU. Kg.

59 103 KOTA STONE ( MACHINE CUT) 25MM.TH Sq. m.

60 104 ROUGH SHAHABAD ( 25 TO 30 MM. TH) Sq. m.



63 108 TANDOOR ( HAND CUT) 25 MM. TH Sq. m.

64 109 TANDOOR 25 MM. TH. (MACHINE CUT) Sq. m.

65 110 PLAIN CEMENT TILES Sq. m.

66 111 CEMENT COLOUR TILES Sq. m.

67 112 WHITE GLAZED TILES 15X15 CM. Doz.

68 113 WHITE GLAZED TILES 10X10 CM. Doz.

69 114 WHITE MAKRANA MARBLE SLAB (12mm TO 15mm ) Sq. m.

70 114a WHITE MARBLE (12mm TO 15mm ) (Other than Makrana) Sq. m.

71 115 MARBLE CHIPS Kg.

72 116 MARBLE COLOUR POWDER Kg.

73 117 WHITE CEMENT

74 118 COLOURED CEMENT Kg.

75 119 MARBLE MOSAIC CHEQ. TILES(GREY) Sq. m.

76 122 KADAPPA ( MACH CUT) 25 MM TH. Sq. m.

77 124 COL. MOZAIC TILES ( GREY CEMENT) Sq. m.

78 125 MARBLE MOSAIC TILES ( GREY CEMENT) Sq. m.

79 127 KOTA STONE STEP (POLISHED) Sq. m.

80 129 COL. MOZAIC TILES ( WHITE CEMENT) Sq. m.

81 131 CHEQUERED TILES (GRAY CEMENT) Sq. m. 82 138 LINSEED OIL DOUBLE BOLIED Ltr.83 139 TURPENTINE Ltr.84 141 FRENCH POLISH Ltr.85 142 VARNISH Ltr.

Per 50 Kg. Bag

86 143 COAL TAR Kg. 87 144 COMERCIAL SPIRIT Ltr.88 145 WHITE ZINC PAINT Kg. 89 150 ALUMINIUM PAINT Ltr.90 151 SYNTHETIC PAINT Ltr.91 152 ENAMEL PAINT / FLAT PAINT Ltr.

92 154 RED OXIDE PAINT Kg.

93 155 PLASTIC EMULSION PAINT Kg.

94 158 COLOUR POWDER (YELLOW EARTH) Kg.

95 159 WASHABLE DISTEMPER Kg.

96 160 OIL BOUND DISTEMPER Kg.

97 163 WATER PROOF CEMENT PAINT Kg.

98 164 T. W. PLANKS 1.2 M. LENGTH Cu. M.

99 175 T. W. PLANKS ABOVE 2.5 M. LENGTH Cu. M.

100 177 T.W. PLANK 25 TO 50 MM TH. 10-15 CM Wide Cu. M.

101 178 T.W. GIRDER (JOIST) Cu. M.

102 180 T.W. PLANKS 20 MM. TH (10-15 CM Wide) Cu. M.

103 180a Teak Wood Battens Cu. M. 104 183 T.W.BULLIES 100 MM DIA Rmt.

105 184 T.W. BULLIES 125 MM DIA. Rmt.

106 185 T.W. BULLIES 150 MM DIA. Rmt.

107 186 JUNGLE WOOD PLANKS & IN GENERAL Cu. M.

108 190 G.I. SCREW BOLTS No.

109 191 G.I. 'J' HOOKS 6 MM. DIA. No.

110 192 G.I. WASHERS No.

111 193 MANGLORE TILES CLASS ''A'' No.

112 196 J.W.BALLIES 150 MM. DIA Rmt.

113 197 MANGLORE RIDGE/HIP TILES No.

114 199 G.C.I. SHEETS (CORRUGATED ) 20 BWG. M. T.

115 199a G.I.SHEET COLOUR M. T.

116 200 G.I. WASHERS Kg.

117 201 G.I.NUT AND BOLTS Kg.

118 206 STRONG IRON BOLTS 10 MM. DIA. Kg.

119 208 RIDGE CAP (PLAIN G.I.) M. T.

120 210 BITUMINOUS WASHERS Kg.

121 211 A.C. SHEET RIDGE Pair.

122 211a Googly Bolt With Bitumenous Washer Kg.

123 213 MANGLORE GLASS TILE No.

124 215 A.C. PLAIN SHEET 6 MM. TH. Sq. m.

125 218 A.C.CORRUGATED SHEET 6 MM. TH. Sq. m.

126 222 PLAIN A.C. SHEET 4 MM. TH. Sq. m.

127 223 HARD BOARD 6 MM. TH. Sq. m.

128 224 PLY WOOD 12 MM. TH. Commertial Sq. m.

129 225 PLY WOOD 6 MM. TH. Commertial Sq. m.

130 225a PLY WOOD 4 MM. TH. Commertial Sq. m.

131 226 PARTICAL BOARD (12 MM.TH.) Sq. m.

132 226a Marine Ply 12 mm Sq. m.

133 226b Marine Ply 6 mm Sq. m.

134 226c Marine Ply 4 mm Sq. m.

135 227 INDIAN SUPERIOR T. W. FRAME Cum

136 228 IRON HOLD FAST 300X40X5MM No.

137 229 BUTT HINGES ALUMINIUM 75 MM No.



140 232 TOWER BOLT ALUMINIUM 150 MM No.



143 235 HANDLE ALUMINIUM 125 MM. No.

144 236 HANDLE AND EYES ALUMN. 225 MM No.

145 239 GLASS 5.5 MM. THICK (PLAIN) Sq. m.

146 241 HANDLE IRON OXI. 100 MM. No.

147 242 TOWER BOLT 150 MM. IRON No.

148 243 HOOK & EYE IRON OXI. 75 MM No.

149 245 HANDLE IRON OXI. 125 MM No.

150 246 HOOKS AND EYES 225 MM IRON OXI No.

151 247 MORTICE LOCK SUPERIOR No.

152 248 SLIDING DOOR BOLT (TADI) No.

153 249 ALDROP ALUMINIUM 300 X 16 MM No.

154 250 BUTT HINGES IRON OXI. 125 MM No.

155 251 BUTT HINGES IRON OXI.100 MM No.

156 252 BUTT HINGES IRON OXI. 90 MM No.

157 253 ALDROP IRON OXI. 300 MM (20 MM DIA.) No.

158 254 IR. OXI. TOWER BOLT 150 MM. No.

159 255 TOWER BOLT IRON OXI. 250 MM. No.

160 256 TOWER BOLT IRON OXI.200 MM No.

161 257 LATCH 250 MM LONG IRON OXI. No.

162 258 BLACK HINGES No.

163 259 STR. BUTT HINGE BR.OXI 150 MM. No.

164 260 STR. STRAP HINGE BR.OXI 200 MM. No.

165 261 STR. BUTT HINGE BR.OXI 100 MM. No.

166 262 TOWER BOLT IRON OXI.300 MM No.

167 263 CHAIN AND STARLE IRON No.

168 264 BR.OXI, TOWER BOLT 250 MM. No.

169 265 IRON OXI. STRAP HINGE No.

170 266 B.R. ORNAMENTAL HANDLE No.

171 269 HANDLE FOR STEEL WINDOWS No.

172 272 SOLID CORE T.W. VENEER 35 MM Sq. m.

173 273 BRASS DOUBLE ACTING SPRING HINGES No.

174 274 SOLID CORE (COMME)SHUTTER 35 MM Sq. m.

175 276 X.P.M. 12 MM X 18 GAUGE Sq. m.

176 277 HANDLE IRON OXI.150 MM No.

177 278 STOPPER FOR STEEL WINDOW No.

178 279 FLY PROOF G.I. WIRE MESH Sq. m.

179 288 HAMP ROPE Kg.

180 292 FERRUL FOR C.I. PIPE 100 MM No.

181 293 COUPLING C.I.80 MM. No.

182 294 COUPLING CAST IRON 100 MM No.

183 296 BELL MOUTH COVER (100 MM) DIA No.

184 304 CLAMP FOR G.I. PIPE No.

185 310 C.I.COVER 45X30 CM. WITH FRAME No.

186 319 BIB STOP TAP BR. HEAVY 15 MM. No.



189 322 SOCKET FOR 15 MM. TAP No.



192 326 WHEEL STOP TAP OF BRASS 15 MM No.



195 331 GUN M. STOP TAP & CR. WH. 20 MM No.

196 332 GUN M. STOP TAP & CR.WH 25 MM No.

197 334 SHOWER ROSE CHR PLATED BR 10 CM No.

198 340 BALLCOCK 15 MM. DIA. P.V.C. FLOAT No.

199 341 BALLCOCK 25 MM. DIA. P.V.C. FLOAT No.

200 348 W.C. PANS 63 CM. Indian Closet WITH TRAP No.

201 349 10 LTR. FLU. TANK WITH ACCESSORIES (CI) No.

202 350 FOOT REST CHEQUERED 25 X 10 CM Pair.

203 352 W.C. PAN 63 CM. IST CL(ORISA) No.

204 353 W.C. PAN 63 CM (ORRISA TYPE) CM. IST CLASS WITH TRAP No.

205 354 HALF STALL TYPE URINAL No.

206 356 LIPPED TYPE URINAL No.

207 357 HALF ROUND E.W. PIPE 100 MM. Rmt.

208 358 WASH BASIN (45X30 CM COL. GLAZE) No.

209 359 W/GLAZED E.W.SINK 0.600.2X0.45 with acc. No.

210 360 15 MM DIA CRO.PLATED BIB COCK No.

211 362 WHITE GLAZED W.H. BASIN 0.45X0X0.3X0.2 No.

212 366 A.C.RAIN WATER PIPE 75 MM. DIA Rmt.

213 367 BIB TAP 15 MM BRASS MEDIUM No.

214 368 BIB TAP 15 MM CAST IRON No.

215 369 C.I. COWL/VENT 75 MM. DIA No.



218 372 C.I.COLLER 75 MM. DIA No.

219 373 C.I.COLLER 100 MM.DIA No.

220 374 C.I.COLLER 150 MM. DIA No.

221 375 G.I.PIPE 15 MM. DIA MEDIUM TYPE Rmt.

222 376 G.I.PIPE 20 MM. DIA MEDIUM Rmt.








230 384 EUROPEAN TYPE W.C. PAN 68 C.M. (WHITE) No.

231 393 C.I.GRATING 75 MM. DIA No.

232 394 C.I.GRATING 100 MM. DIA No.

233 395 A.C. PIPE 100 MM. DIA Rmt.

234 396 A.C. PIPE 75 MM.DIA. SHOE No.

235 397 SALT GLAZED S.W. GULLY TRAP No.

236 398 STONE WARE PIPE 100 MM. DIA Rmt.

237 407 U.P.V.C.PIPE 15 MM. DIA.10kGF/Cm2 PRESSURE Rmt.







244 413B U.P.V.C.PIPE 75 MM. DIA.10kGF/Cm2 PRESSURE Rmt.

245 413C U.P.V.C.PIPE 90 MM. DIA.10kGF/Cm2 PRESSURE Rmt.

246 414 COLOUR EUROPEAN TYPE W.C. PAN No.

247 415 COLOUR WASH H.BASIN 45 CM X 30 CM No.

248 420 GUN. M. STOP COCKS 15 MM CL. WHEEL No.

249 422 BRASS WHEEL STOP TAP 32 MM. DIA No.

250 424 BRASS WHEEL STOP TAP40 MM. DIA No.




254 432 GUN METAL STOPCOCK C. WHEEL 20 MM No.



257 442 WH. GL. FULL STALL URINAL No.

258 446 WH. GL. WASH BASIN 63 X 45 CM. No.

259 447 COL. GL. WASH BASIN 63 X 45 CM. No.

260 456 C.I.Y. JUNCTION 75 MM DIA No.



263 459 A. C. COLLER No.

264 460 C.I. PLUG BENT 150 MM DIA No.

265 461 A.C. DOUBLE 'Y' JUNCTION 100 MM No.



268 464 A.C. PIPE 150 MM DIA. Rmt.

269 465 A. C. PLUG BEND 150 MM DIA. No.

270 466 STONE WARE PIPE 150 MM DIA. Rmt.

271 467 STONE WARE PIPE 225 MM DIA. Rmt.

272 591 COL. GLAZED TILES 15 X 15 CM. Doz.

273 597 ALLUMINIUM ROD 25 MM DIA. Rmt.

274 598 VENEER 4 MM THICK T.W. Sq. M.

275 602 WIRED GLASS 6 MM THICK Sq. M.

276 603 C. I. PIPE 75-80 MM. DIA. Rmt.

277 604 C. I. PIPE 100 MM DIA. Rmt.

278 605 C. I. PIPE 150 MM DIA. Rmt.

279 622 GULLY TRAP COVER WITH FRAME C.I. No.

280 626 A. C. SHOE 100 MM. DIA No.

281 628 A. C. COWL. VENT. ( 100 MM DIA.) No.

282 630 A. C. BEND 75 MM No.

283 631 A. C. BEND 100 MM No.

284 632 C. I. BEND 100 MM No.

285 635 No.

286 641 HINGES 125 MM Cromium Plated No.

287 642 TOWER BOLTS 300 MM CR. PLATED (IRON) No.

288 643 TOWER BOLTS 200 MM. CR. PLATED (IRON) No.

289 644 ALDROP 300 X 16 MM CR. PLATED No.

290 645 HANDLE 125 MM CR. PLATED No.

291 647 HOOKS AND EYES CR. PLATED No.

292 648 BR. OXI. BUTT. HINGES 125 MM No.

293 649 BR. OXI. ALDROP 300 X 16 MM. No.

294 650 BR. OXI. HANDLES 125 MM No.

295 651 BR. OXIDE TOWER BOLTS 300 MM No.

296 652 BR. OXI. TOWER BOLTS 200 MM No.

297 653 BR. OXI. HOOKS AND EYES 200 MM No.

298 655 BR. OXI. HINGES 100 MM. No.

299 656 HINGES IRON 100 MM No.

300 659 WELDED MESH 50 X 50 X 2.54 MM (10 GAUGE) Sq. M.

301 663 BARBED WIRE Kg.

302 664 BAMBOO 50 MM DIA. Rmt.

303 665 COIR STRING Kg.

304 666 BAMBOO 25 MM DIA. Rmt.

305 708 RED POWDER / GERU Kg.

306 719 NON TEAK / JUNGLE WOOD Cu. M.

307 721 CHICKEN PROOF JALI Sq. M.

308 755 CEMENT BASE PUTTY Kg.

309 801 T. W. PARTICLE BOARD, BOTH FACE LAMINATED 12MM Sq. M.

310 837 A. C. COWL. DOME 3" (75 MM) DIA. No.

311 838 A. C. COWL. DOME 4" (100 MM) DIA. No.

SYMET BATH FITTINGS. 312 839 WASTE COUPLING 31/32 MM (H/T/F/T) No.

313 840 GRATING DOOM 100 MM No.

TOWEL ROD WITH CLAMPS ( 16MM DIA) Cromium Plated 60 CM

314 841 GRATING DOOM 125 MM No.

315 842 GRATING DOOM WASTE HOLE 125 MM No.

316 843 GRATING ROUND 140 MM No.

317 844 GRATING SQUARE 150 MM No.

318 845 GRATING SQUARE WASTE HOLE 150 MM No.

319 846 GRATING SQUARE FITTINGS 100 MM No.

320 847 GRATING SQUARE 150 MM No.

321 848 BIBCOCK STANDARD 15 MM. No.

322 849 BIBCOCK FANCY WITH FLANGE 15 MM No.

323 850 BIBCOCK LONG BODY WITH FLANGE 15 MM No.

324 851 FLANGE 15 MM No.

325 852 EXTNSION NIPPLE 15 MM No.

326 853 PILLAR COCK 15 MM No.

327 854 PUSHCOCK ( 20 MM FEMALE THREADS) 15 MM. No.

328 855 PUSHCOCK (-DO-) WITH NIPPLE 15 MM No.

329 856 PUSHCOCK ( 15 MM FEMALE THREADS) 10 MM No.

330 857 STOPCOCK (15 MM MALE / FEMALE) 15 MM. No.

331 858 STOPCOCK (FEMALE THREAD) 20 MM. No.

332 859 PRESSURE FLUSH COCK ( HEAVY) No.

333 860 ANGLE STOP COCK WITH FLANGE 15 MM No.

334 861 CONCEALED STOPCOCK 15 MM No.

335 862 CONCEALED STOPCOCK 20 MM No.

336 863 BALLCOCK COMPLETE WITH EPOXY 15 MM No.

337 864 BALLCOCK COMPLETE – DO- 20 MM No.

338 865 BALLCOCK COMPLETE – DO- 25 MM No.

339 866 SWIVELLING SHOWER 15 MM No.

340 867 SHOWER ARM WITH FLANGE 225 MM No.

341 868 URINAL SPREADER 15 MM No.

342 869 MORTICE LOCK HANDLE No.

343 870 BUTT HINGE (3") 75X60 MM No.

344 871 BUTT HINGE (4")100X75 MM No.

345 872 REFLEX HINGE L & R (3')75X69 MM No.

346 873 TOWER BOLT (4 ") 100 MM No.

347 874 TOWER BOLT (6 ") 150 MM No.

348 875 TOWER BOLT (8 ") 200 MM No.

349 876 UPVC SANITORY GRADE PIPE 75 MM Rmt.



Cast Iron Spigot Socket Pipe I.S. 1536 / 1989 Class LA

352 879 80 mm Dia Rmt.

353 880 100 mm Dia Rmt.354 881 125 mm Dia Rmt.355 882 150 mm Dia Rmt.

356 883 200 mm Dia Rmt.357 884 250 mm Dia Rmt.

358 885 300 mm Dia Rmt.

359 886 CERAMIC TILES 300mm x 300mm Sqm

360 887 No.

361 888 PVC FLUSHING TANK 10 LIT. CAPACITY WITH ACCE. No.

362 889 L.D.O Litre

363 890 Vetrified Tiles 600 mm x 600 mm, 8 mm thick Sqm

364 891 Vetrified Tiles 900 mm x 900 mm, 10 mm thick Sqm

365 892 Gypsum Board 9 mm Thick Sqm

892a Gypsum Board 12.5 mm Thick Sqm

366 893 P.O.P. Celling Sheet 12.5 mm Thick Sqm

367 894 Plasticizer Litre

368 895 Super Plasticizer Litre

369 896 Iron Oxidised Parliamentry Hinges size 75 mm x 150 mm No.



372 899 Brass Oxidised Parliamentry Hinges size 75mm x 150 mm No.

373 900 Brass Oxidised Parliamentry Hinges size 100 mm x 150 mm No.

374 901 Brass Oxidised Parliamentry Hinges size 125 mm x 150 mm No.

375 902 Glass 3.0 MM. THICK ( plain ) Sqm.

902a Glass 4.0 MM. THICK ( plain )902b Glass 5.0 MM. THICK ( plain )902c Glass 6.0 MM. THICK ( plain )902d Glass 8.0 MM. THICK ( plain )902e Glass 10.0 MM. THICK ( plain )

376 903 Glass 3.0 MM. THICK ( Bajri ) Sqm.

377 904 Emulsion water based (water proof cement paint) Litre

378 905 Stone Dust Cu. M.

379 906 FLY ASH M. T.

380 907 ANGLO INDIAN TYPE W.C.PAN NO.

381 908 WATER JET WITH PIPE FOR W.C. S.S. NO.

382 909 BIB COCK SWAN NECK LONG HEADED FOAM FLOW NO.

383 910 SUNMICA 0.8MM Sqm

384 911 FOURMICA 1MM Sqm

385 912 ADDESIVE (FEVICAL) KG

386 913 BAISON BOARD 8 MM Sqm

913a BAISON BOARD 12 MM Sqm

387 914 GRADE-I CRUSHED METAL (45 MM TO 90 MM) Cu. M.

388 915 GRADE-II CRUSHED METAL (45 MM TO 63 MM) Cu. M.

389 916 GRADE-III CRUSHED METAL (22.5 MM TO 53 MM) Cu. M.

STAINLESS STEEL SINK 600MM X 450MM X 250MM (1 mm Thick ) WITH ACCE.

Csr Final11 12

Documents

Transcript of Csr Final11 12