www.flexicel l .com.au

Cross Linked Closed Cel l

Polyolefin Thermal Insulation Foam

FlexiCell XLPE is a closed cell chemically cross linked polyolefin foam, commonly used as thermal insulation to protect against heat loss and condensation.

FlexiCell XLPE is reinforced with a heat bonded aluminium foil and is available with factory applied adhesive liner.

FlexiCell XLPE prefabricatedfittings are made in different sizes and shapes such as Elbows,T and Y sections.

Prefabricated fittings are available in a variety of wall thicknessess and inner diameters.

Easy to apply selfadhesive rolls and sheets

Very low thermalconductivity

FlexiCell Tubes

FlexiCell Rolls

FlexiCell Sheets

FlexiCell Prefabricated Fittings

FlexiCell XLPE is a CFC and HCFC free product. It does not contain, nor use in

its production, any substances that contribute to Ozone Depletion Potential

(ODP). FlexiCell XLPE is fibre free and has a very low Volatile Organic

Compound (VOC) emission level.

FIRE AND SMOKE PERFORMANCEFlexiCell XLPE meets AS /NZ 1530.3 & ISO 9705 - early fire hazard properties

of materials.

EXCELLENT THERMAL EFFICIENCY

QUICK & EASY TO INSTALL

ZERO WATER VAPOUR PERMEABILITY Condensation control is a key performance aspect of any insulation.

FlexiCell XLPE can be installed without any additional vapour barriers due to

its closed cell construction, and watertight aluminium foil barrier.

FlexiCell XLPE is fast and easy to install. It is more flexible than other pipe

insulation products, including glasswool, polystyrene and other extruded

foams. This results in greatly reduced installation time, thereby affording

significantly increased productivity.

FlexiCell XLPE’s excellent protection against condensation ensures the

long term thermal efficiency of the insulation.

ENVIRONMENTALLY FRIENDLY

FlexiCell XLPE has a very low thermal conductivity, guaranteeing high

performance in thermal insulation applications. Further to this, as

FlexiCell XLPE is closed cell, it also provides excellent levels of

condensation control.

+105-80 oC

DIN EN 14706, ASTM C1427

ASTM C518

Grey Color

Temperature Range

Applications: Themal insulation / protection for pipes, air ducts, vessels (incl. elbows, �ttings, �anges, etc.) and process equipment to prevent condensation and save energy.

Thermal Conductivity 0.032 (W/mk) at 23°C

3Density 25 ±3 kg/m (foam core only)

Max. Line TemperatureMin. Line Temperature

fcnz

-xlp

e-11

19-v

-0.1

Physical Properties

oC

Size AvailabilityTubes

Pressure sensitive adhesive coating options available.

Insulation Thickness

Environmental Properties

ASTM G21

Resistance to Fungi Excellent

ISO 22196

Resistance to Bacteria Excellent

Storage Life

Can be stored in dry, clean rooms at normal relative humidity (50% to 70%) and ambient temperature (0 C - 35 C)

Self adhesive products should be used within 1 year.

foam is generally resistant to UV radiation. However, for all outdoor application it must be protected with additional weather resistant

cladding, only FLEXICELL N Clad products are suitable for outdoor conditions for additional protection.

*XLPE

oo

ASTM C871

Chemical Analysis Very Good

ASTM D5116

Emission VOC (level) <4 μg/m /hr

Environmental FreindlyOzone Resistance Excellent Ozone Depletion Potential (ODP) 0 Global Warming Potential (GWP) <5CFC & HCFC, Dust, Fibres Free

Disclaimer: This information on Hira Industries products is presented to the best of our knowledge. All product data is based on average values and is for guidance only. As these products are subject to constant research and development, we reserve the right to update the contents without notice.

TECHNICAL DATA

ASTM E96

Water Vapour Permeance [perms] 0

JIS K6767

Water Absorption 0.00008 (g/cm )

ASTM B117

Resistance to Corrosion Excellent

ASTM D3574

Compression Set 35.77% (25mm)

Reaction to Fire

IMO MSC 307(88) Part 2 & 5

Smoke Toxicity Levels Passed

Ignitability 0Spread of Flame 0Heat Evolved 0 Smoke Developed 1

AS/NZ 1530.3 ISO 9705 (Group 2s Rating) Avg. Smoke Prod.:

0.493 m /sec

BS 476 Part 6 & 7 Class O

2

10 mm to 40 mm10 mm to 50 mm20 mm to 50 mm51 mm to 75 mm51 mm to 75 mm

Rolls

Sheets

2

3 mm to 25 mm

12 mm to 63 mm

A range of sizes are available

1.20 x 2.4m

6 mm to 28 mm32 mm to 125 mm140 mm to 712 mm25 mm to 115 mm125 mm to 712 mm