Covered Bridges...Covered Bridges Fabrics in the Covered Bridges Collection Finished Quilt Size: 66...
Transcript of Covered Bridges...Covered Bridges Fabrics in the Covered Bridges Collection Finished Quilt Size: 66...
A Free Project SheetNOT FOR RESALE
Finished Quilt Size: 66” x 79”49 West 37th Street, 14th floor, New York, NY 10018
Toll Free: 800-294-9495fax: 212-679-4578
www.blankquilting.net
Covered BridgesCovered Bridges
Quilt 1By Lennie Honcoop
Skill Level: Advanced Beginner
Qui
lt D
esig
n by
Hei
di P
ridem
ore
Covered Bridges
Fabrics in the Covered Bridges Collection
Finished Quilt Size: 66” x 79”Quilt 1
24” Panel - Green8995P-66
Wood - Brown8996-39
Stones - Brown8998-39
Stones - Gray8998-95
Water Texture - Blue8999-78
Water Texture - Red8999-88
Trees - Green9000-66
Covered Bridge TextureLt. Blue – 9001-11
Covered Bridge TextureEcru – 9001-44
Blocks - Black8997-99
Covered Bridges Quilt 1Page 1
Cutting Instructions Please Note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.
Fig. 2
Fig. 1
Materials1 panel 24” Panel - Green (A) 8995P-661 panel Blocks - Black (B) 8997-99¾ yard Water Texture - Red (C) 8999-881 ⅓ yards Water Texture - Blue (D) 8999-78*⅞ yard Trees - Green (E) 9000-66⅓ yard Stones - Gray (F) 8998-951 ½ yards Covered Bridge Texture - Ecru (G) 9001-442 yards Wood - Brown (H) 8996-395 yards Stones - Brown (Backing) 8998-39
*Includes binding
From the 24” Panel - Green (A), fussy cut:• (2) 22 ½” x 16 ½” small panels, each centered on a bridge.
From the Blocks - Black (B), fussy cut:• (8) 10 ½” blocks.
From the Water Texture - Red (C), cut:• (4) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 66 ½” strips.• (3) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 56 ½” strips.• (4) 1 ½” x 24 ½” WOF strips.• (2) 1 ½” x WOF strips. Sub-cut (4) 1 ½” x 16 ½” strips. From the Water Texture - Blue (D), cut:• (4) 2” x WOF strips. Sub-cut (16) 2” x 10 ½” strips.• (6) 2” x WOF strips. Sub-cut (16) 2” x 13 ½” strips.• (8) 2 ½” x WOF strips for the binding.
From the Trees - Green (E), cut:• (1) 24 ½” x WOF strip. Sub-cut (2) 12 ½” x 24 ½” strips.
From the Stones - Gray (F), cut:• (2) 4 ½” x 24 ½” WOF strips.
From the Covered Bridge Texture - Ecru (G), cut:• (4) 2 ½” x 24 ½” WOF strips.• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 53 ½” strips.• (2) 1 ½” x WOF strips. Sub-cut (4) 1 ½” x 12 ½” strips.• (1) 2 ½” x WOF strip. Sub-cut (2) 2 ½” x 12 ½” strips.• (1) 26 ½” x WOF strip. Sub-cut (2) 2 ½” x 26 ½” strips, (6) 1 ½” x 26 ½” strips and (5) 1 ½” x 12 ½” strips.
From the Wood - Brown (H), cut:• (2) 5 ½” x 69 ½” Length of Fabric (LOF) strips.• (2) 5 ½” x 66 ½” WOF strips from the remaining fabric, piece as needed.
From the Stones - Brown (Backing), cut:• (2) 87” x WOF strips for the backing. Sew the strips together and trim to make the 74” x 87” back.
Sewing Instructions1. Sew (1) 1 ½” X 16 ½” Fabric C strip to each side of (1) 22 ½” x 16 ½” Fabric A small panel. Sew (1) 1 ½” x 24 ½” Fabric C strip to the top and to the bottom of the Fabric A small panel to make (1) Unit 1 block (Fig. 1). Repeat to make a second Unit 1 block.
AC C
C
C
Unit 1make 2
Trim to measure12 ½” x 12 ½”after the bordersare added
BD D
D
D
Unit 2make 8
2. Sew (1) 2” x 10 ½” Fabric D strip to each side of (1) 10 ½” Fabric B block. Sew (1) 2” x 13 ½” Fabric D strip to the top and to the bottom of the Fabric B block. Trim the block to measure 12 ½” square to make (1) Unit 2 blocks (Fig. 2). Repeat to make (8) Unit 2 blocks.
Covered Bridges Quilt 1Page 2
G
G
F
Unit 1
Block One
G
G
F
Unit 1
Block Two
G
G
Unit 2
Unit 2
Block Three
G
G
Unit 2
Unit 2
Block Four
G
GGG G G
G
Block Five
Fig. 3
Fig. 6
Fig. 4
Fig. 5
Fig. 7
3. Sew (1) 2 ½” x 24 ½” Fabric G strip to the top and to the bottom of (1) Unit 1 block. Sew (1) 4 ½” x 24 ½” Fabric F strip to the bottom of the sewn block to make (1) Block One rectangle (Fig. 3).
4. Sew (1) 2 ½” x 24 ½” Fabric G strip to the top and to the bottom of (1) Unit 1 block. Sew (1) 4 ½” x 24 ½” Fabric F strip to the top of the sewn block to make (1) Block Two rectangle (Fig. 4).
5. Sew (1) 1 ½” x 12 ½” Fabric G strip to the top and to the bottom (1) Unit 2 block. Sew (1) Unit 2 block to the bottom of the sewn strip to make (1) Block Three (Fig. 5).
6. Sew (1) 1 ½” x 12 ½” Fabric G strip to the top and to the bottom (1) Unit 2 block. Sew (1) Unit 2 block to the top of the sewn strip to make (1) Block Four (Fig. 6).
7. Sew (5) 1 ½” x 12 ½” Fabric G strips and (4) Unit 2 blocks together lengthwise and alternating them. Sew (1) 1 ½” x 53 ½” Fabric G strip to the top and to the bottom of the sewn strip to make (1) Block Five (Fig. 7).
Covered Bridges Quilt 1Page 3
Fig. 10Fig. 9Fig. 8
G
G GE
Block Six
G
GG E
Block Seven
Quilt Top Assembly (Refer to the Quilt Layout while assembling.)13. Sew (1) 2” x 66 ½” Fabric C strip to each side of the Center Block. Sew (1) 2” x 56 ½” Fabric C strip to the top and to the bottom of the Center Block.
14. Sew (1) 5 ½” x 69 ½” Fabric H strip to each side of the Center Block. Sew (1) 5 ½” x 66 ½” Fabric H strip to the top and to the bottom of the Center Block to make the quilt top.
15. Layer and quilt as desired.
16. Sew the (8) 2 ½” x WOF Fabric D strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.
17. Bind as desired.
G G
G G
Block One
Block Two
Block Three
Block Four
Block Five
Block Six
Block Seven
8. Sew (1) 2 ½” x 12 ½” Fabric G strip to the top of (1) 12 ½” x 24 ½” Fabric E strip. Sew (1) 1 ½” x 26 ½” Fabric G strip to each side of the sewn strip to make (1) Block Six (Fig. 8).
9. Sew (1) 2 ½” x 12 ½” Fabric G strip to the bottom of (1) 12 ½” x 24 ½” Fabric E strip. Sew (1) 1 ½” x 26 ½” Fabric G strip to each side of the sewn strip to make (1) Block Seven (Fig. 9).
10. Sew (1) 2 ½” x 26 ½” Fabric G strip, (1) Block One rectangle, (1) 1 ½” x 26 ½” Fabric G strip, (1) Block Three and (1) Block Six together lengthwise and in that order to make Row One (Fig. 10).
11. Sew (1) Block Seven, (1) Block Four, (1) 1 ½” x 26 ½” Fabric G strip, (1) Block Two rectangle and (1) 2 ½” x 26 ½” Fabric G strip together lengthwise and in that order to make Row Two (Fig. 10).
12. Sew Row One, Block Five and Row Two together in that order to make the Center Block (Fig. 10).
©2017 Blank Quilting Corp.
Covered Bridges Quilt 1
Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.blankquilting.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.
Page 4
Quilt Layout
C C
C
C
H
H
H H