COSMETICS & PHARMACEUTICAL - Slim Aluminium · PHARMACEUTICAL INDUSTRY. TECHNICAL DATA...
2
COSMETICS & PHARMACEUTICAL rough our collaboration with the leading companies of the sector, Slim Aluminium is able to offer both mill finish and bright finish for the production of collars, actuators, ferules and caps. MARKETS EXCELLENCE IN ALUMINIUM www.slimalu.com Our finishing and rolling technologies deliver exceptional surface quality and formability, as well as excellent anodised or polished products, thus ensuring the satisfaction of the major leading companies in the market. Our product range includes aluminium for the production of delivery systems, with an excellent surface as well as very good designing and formability properties guaranteed by our finishing and rolling technologies. COSMETICS PHARMACEUTICAL INDUSTRY
Transcript of COSMETICS & PHARMACEUTICAL - Slim Aluminium · PHARMACEUTICAL INDUSTRY. TECHNICAL DATA...
COSMETICS & PHARMACEUTICAL
Through our collaboration with the leading companies of the sector, Slim Aluminium is able to offer both mill finish and bright finish for the production of collars, actuators, ferules and caps.
MARKETS
EXCELLENCE IN ALUMINIUM www.slimalu.com
Our finishing and rolling technologies deliver exceptional surface quality and formability, as well as excellent anodised or polished products, thus ensuring the satisfaction of the major leading companies in the market.
Our product range includes aluminium for the production of delivery systems, with an excellent surface as well as very good designing and formability properties guaranteed by our finishing and rolling technologies.
COSMETICS
PHARMACEUTICAL INDUSTRY
TECHNICAL DATA
CERTIFICATION, HEALTH, SAFETY, ENVIRONMENT & QUALITY
Slim Aluminium S.p.A. - P. Iva 01906930597 - Piazzale dell’Alluminio, 04012 Cisterna di Latina (LT), Italy - P.P. BOX 162
Tel +39 06 968 301 - Fax +39 06 968 303 81 - [email protected] - www.slimalu.com
ENER
GY MANAGEMENT SYSTEM
Alloys
Acc. to EN 573-3
EN-AW 1050A
EN-AW 3003
EN-AW 3005
EN-AW 3103
EN-AW 5005
EN-Aw 5657
EN-AW 8011A
Temper
Acc. to EN 515 H14, H24, H26, H28
Thickness
Tolerances Acc. To EN
485-4
From 0,3 to 1,0mm
Width
Tolerances Acc. To EN
485-4
From 25mm to 1500mm
SurfaceMill Finish
Semi Bright
High Bright
Mechanical propertiesAcc. To EN 485-2
Ra [µm] ~0,30
Ra [µm] ~0,10
Ra [µm] ~0,05
Surface protectionOn request paper interleave or plastic film
Inner diameter reel [mm]400/500mm
Outer diameter reel [mm]max. 1800mm
