Conquest SERVICE LETTER - Cessna
Transcript of Conquest SERVICE LETTER - Cessna
![Page 1: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/1.jpg)
Conquest SERVICE LETTERCQL-71-02
TITLE
POWER PLANT - TRANSMITTAL OF P&WC S.I.L NO. PT6A-204, S.I.L NO. GEN-125, PT6A SPB NO.34R1, S.I.L NO GEN-116R1, AND S.I.L NO. GEN-123
EFFECTIVITY
All Cessna model 425 airplanes with Pratt & Whitney Canada (P&WC) engines installed
REASON
To transmit the five Pratt & Whitney Canada (P&WC) service documents that follow:
• Service information letter S.I.L NO. PT6A-204, Recommended Maintenance following Engine-mountedStarter/Generator faults
• Service information letter S.I.L NO. GEN-125, Material Test Result Findings from supplier: Carmel Forge• Spare parts bulletin PT6A SPB No. 34R1, Turboprop Engine Repair Parts For The Gas Generator
Diffuser Exit Tubes - Introduction Of• Service information letter S.I.L NO. GEN-116R1, Installation of O-Ring in Oil Filter Groove• Service information letter S.I.L NO. GEN-123, Qualified Engine Oil Analysis Laboratory List.
DESCRIPTION
Cessna Aircraft Company wishes to transmit these five P&WC service documents as information formodel 425 airplane owners.
COMPLIANCE
INFORMATIONAL. This service letter is for informational purposes only.
LABOR HOURS
Not applicable
MATERIAL AVAILABILITY
Not applicable
REFERENCES
P&WC Service information letter S.I.L NO. PT6A-204, Recommended Maintenance followingEngine-mounted Starter/Generator faults
P&WC Service information letter S.I.L NO. GEN-125, Material Test Result Findings from supplier: CarmelForge
P&WC Spare parts bulletin PT6A SPB No. 34R1, Turboprop Engine Repair Parts For The Gas GeneratorDiffuser Exit Tubes - Introduction Of
P&WC Service information letter S.I.L NO. GEN-116R1, Installation of O-Ring in Oil Filter Groove
P&WC Service information letter S.I.L NO. GEN-123, Qualified Engine Oil Analysis Laboratory List
CQL-71-02April 15, 2013 Page 1 of 1
Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800, Fax 1-316-517-7271,Email: [email protected]
This document contains technical data and is subject to U.S. export regulations. This information has been exported from the United Statesin accordance with export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991
COPYRIGHT © 2013
![Page 2: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/2.jpg)
Conquest OWNER ADVISORYCQL-71-02
TITLE
POWER PLANT - TRANSMITTAL OF P&WC S.I.L NO. PT6A-204, S.I.L NO. GEN-125, PT6A SPB NO.34R1, S.I.L NO GEN-116R1, AND S.I.L NO. GEN-123
TO:
Cessna 425 Owner
REASON
To transmit the five Pratt & Whitney Canada (P&WC) service documents that follow:
• Service information letter S.I.L NO. PT6A-204, Recommended Maintenance following Engine-mountedStarter/Generator faults
• Service information letter S.I.L NO. GEN-125, Material Test Result Findings from supplier: Carmel Forge• Spare parts bulletin PT6A SPB No. 34R1, Turboprop Engine Repair Parts For The Gas Generator
Diffuser Exit Tubes - Introduction Of• Service information letter S.I.L NO. GEN-116R1, Installation of O-Ring in Oil Filter Groove• Service information letter S.I.L NO. GEN-123, Qualified Engine Oil Analysis Laboratory List.
COMPLIANCE
INFORMATIONAL. This service letter is for informational purposes only.
WARRANTY
Refer to P&WC service documents
Please contact a Cessna Authorized Service Facility for detailed information.
NOTE: As a convenience, service documents are now available online to all our customers through asimple, free-of-charge registration process. If you would like to sign up, please visit the "CustomerAccess" link at www.cessnasupport.com to register.
CQL-71-02April 15, 2013 Page 1 of 1
Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800, Fax 1-316-517-7271,Email: [email protected]
This document contains technical data and is subject to U.S. export regulations. This information has been exported from the United Statesin accordance with export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991
COPYRIGHT © 2013
![Page 3: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/3.jpg)
S.I.L NO. PT6A-204
SERVICE INFORMATION LETTER
This Service Information Letter is valid until superceded or cancelled by revision
EXPORT CONTROL CLASSIFICATION This document does not contain technical data
ISSUED: 3 Apr 2013
Page 1 of 1 PRATT & WHITNEY CANADA CORP.
1000 MARIE-VICTORIN, LONGUEUIL QUEBEC, CANADA J4G 1A1
PRINTED IN CANADA
Subject Recommended Maintenance following Engine-mounted Starter/Generator faults
Applicability PT6A Series engines Pratt and Whitney Canada wishes to advise operators and maintainers of the possibility of engine damage resulting from engine-mounted Starter/Generator malfunctions. P&WC Engine Maintenance Manuals for the applicable model families have recently been revised to include unscheduled inspection recommendations in the event of aircraft Starter/Generator faults or distress. Operators and maintainers are requested to familiarize themselves with the Unscheduled or Special Condition inspection requirements pertaining to aircraft Starter/Generator malfunction appearing in engine Maintenance Manual Chapters 72-00-00 or 05-50, as applicable. For further information, please contact your local P&WC Field Support Representative, or the P&WC Customer Help Desk, Tel 450-647-8000 or 1-800-268-8000. We can also be reached at [email protected], or our website www.pwc.ca. PRATT & WHITNEY CANADA Corp.
Gerry Whitty Deputy Chief Engineer Customer Service
![Page 4: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/4.jpg)
![Page 5: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/5.jpg)
S.I.L NO. GEN-125
SERVICE INFORMATION LETTER
This Service Information Letter is valid until superceded or cancelled by revision.
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data. ISSUED: Mar 1, 2013 Page 1 of 1
PRATT & WHITNEY CANADA CORP.
MARIE-VICTORIN, LONGUEUIL QUEBEC, CANADA J4G 1A1
PRINTED IN CANADA
Subject Material Test Result Findings from supplier: Carmel Forge Applicability All P&WC Engine Models In the coming days, we expect media coverage related to a United Technologies-owned company that supplies forgings to Pratt & Whitney Canada. The report involves past metallurgical testing data practices. We wanted to provide you with some background information in advance. We can assure you that this matter was extensively investigated at the time, corrective actions taken, and it was determined that all engines and parts delivered to our customers during the period met our performance, integrity, durability and safety requirements. Carmel Forge, a United Technologies-owned company located in Israel, produces forgings for disks, seals and cases for a variety of engines and land-based turbines. Carmel Forge is a self-contained forging shop, performing all processes including raw material preparation, heat treating, semi-finished machining and testing. In June 2011, an extensive investigation was immediately launched by Carmel Forge management after being alerted through the UTC Ombudsman program that some test data had been adjusted by certain employees in the past. This was done to avoid additional statistical process control testing, with the belief that adjustments to data were within an acceptable margin of error. A team of Pratt & Whitney investigators and Quality engineers were dispatched to Carmel Forge to investigate the allegation. The investigation included additional metallurgical testing, modeling and validation from which it was confirmed that there was no impact on product performance, integrity, durability or safety. The investigation was shared with the appropriate regulatory authorities, including the Federal Aviation Administration (FAA), Defense Contract Management Agency (DCMA) and Transport Canada, and no subsequent actions (airworthiness directives or service bulletins) were required for delivered components. Carmel Forge has implemented a variety of corrective actions, including software controls, changes to the reporting structure, retraining employees, and personnel changes. We recognize this may raise concerns for you and your customers and we want to reassure you of our commitment to the highest standards of business conduct. Rest assured that we have taken all necessary measures to ensure the integrity of the parts manufactured during that period, and corrective actions were implemented to prevent reoccurrence. If you have any questions, please do not hesitate to contact us.
Doug Purdy Vice President, Quality and Environment, Health and Safety
![Page 6: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/6.jpg)
![Page 7: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/7.jpg)
REVISION TRANSMITTAL SHEETTURBOPROP ENGINE PT6A
SUBJECT: Pratt & Whitney Canada Spare Parts Bulletin No. 34 Rev. No. 1, dated Mar 22/2013(PT6A SPB No. 34R1) REPAIR PARTS FOR THE GAS GENERATOR DIFFUSER EXITTUBES - INTRODUCTION OF
Replace your existing copy of this spare parts bulletin with the attached revised bulletin. Destroy thesuperseded copy.
Please retain this Revision Transmittal Sheet with the revised bulletin.
SUMMARY: This spare parts bulletin is revised to update the engine Applicability of P/N 3118756-01to add PT6A-114A in Para. 7., Material Information.
NOTE: A black bar in the left margin indicates a change in that line of text or figure.
REVISION HISTORY:
Original Issue: Nov 25/1996Revision No. 1: Mar 22/2013
Pratt & Whitney Canada Corp.1000, Marie-VictorinLongueuil, Québec, Canada J4G 1A1Tél. 450-677-9411
22 March 2013
PT6A SPB No. 34R1
![Page 8: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/8.jpg)
![Page 9: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/9.jpg)
1. Model
PT6A-11, PT6A-11AG, PT6A-15AG, PT6A-21, PT6A-25, PT6A-25A, PT6A-25C, PT6A-27,PT6A-28, PT6A-34, PT6A-34AG, PT6A-34B, PT6A-36, PT6A-110, PT6A-112, PT6A-114,PT6A-114A, PT6A-135 and PT6A-135A Engines.
2. Reason
The diffuser exit tube exhibits cracking.
3. Description
Repair parts are introduced to permit salvage of diffuser exit tubes in service.
4. Approval
D.O.T./D.A.A. approved
5. Publications Affected
All applicable PT6A Technical Manuals.
6. Material - Cost and Availability
You can get the procurable parts listed in Para. 7., from any Pratt & Whitney Canada PartsDistribution Center.
P&WC No. 95603, DCR21403
PRATT & WHITNEY CANADA
SPARE PARTS BULLETINPT6A SPB No. 34R1
WARNING - PROPRIETARY RIGHTS & EXPORT CONTROLS NOTICE
This bulletin contains proprietary information of Pratt & Whitney Canada Corp. (″P&WC″), which P&WC provides in confidenceand solely for the purposes of supporting engine certification and providing applicable information regarding the proper use,maintenance, inspection, repair, servicing and parts application of P&WC products and services, as directed therein. Neither thisbulletin nor any information in it may be disclosed to others, or used for any other purpose, including, without limitation, to design,create, develop, reproduce, manufacture or derive any design, part, product, material, process, modification, configuration changeor repair, or obtain FAA or other government approval to do so. Possession and use of this bulletin is also subject to the restrictionsset out in P&WC’s Technical Data Agreement (a copy of which may be obtained by contacting P&WC Technical Publications). Thecontents of this bulletin may be subject to export control laws. Unauthorized export or re-export of the bulletin, or parts thereof, isprohibited. By accepting and possessing this bulletin, you agree to be bound by the foregoing terms.
If a Government agency or department intends to disclose any information, written notice should be given to:VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil, Quebec J4G 1A1.
Export Control Classification
*Data is subject to the jurisdiction of the Export and ImportControls Bureau of the Department of Foreign Affairs andInternational Trade of Canada, Department of Commerceof the United States and/or Department of State of theUnited States.
** Data is not subject to the jurisdiction of the Departmentof Commerce of the United States or Department of Stateof the United States but would become subject if exposedto any US involvement.
Regulation ClassificationNumber
Canadian ECL(s)*
ECCN(s)*
P-ECCN(s)** 9E991
USML (ITAR)*
P-USML**
Nov 25/1996 PT6A SPB No. 34Revision No. 1: Mar 22/2013 Page 1 of 3© 1996 Pratt & Whitney Canada Corp.
PRINTED IN CANADA
TURBOPROP ENGINEREPAIR PARTS FOR THE GAS GENERATOR DIFFUSER EXIT TUBES - INTRODUCTION OF
![Page 10: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/10.jpg)
6. Material - Cost and Availability (Cont’d)
The estimated total cost of new parts needed to replace old parts is $Quote (US, 2013).
The new parts are available.
7. Material Information
The quantity of materials listed in this section is on a per Engine basis.
New P/N Keyword Old P/N Qty
Est. UnitList Price
($US,2013)
InstructionsDisposition
For Engines PT6A-11, PT6A-11AG, PT6A-15AG, PT6A-21, PT6A-25, PT6A-25A, PT6A-25C,PT6A-27, PT6A-28, PT6A-34, PT6A-34AG, PT6A-34B, PT6A-36, PT6A-110, PT6A-112,PT6A-114, PT6A-135 and PT6A-135A:
3102843-01 Tube-Diffuser Exit, GasGen, Assy of
3012509(or)3023521
1 1250.00 (A)
3102842-01 Ê Tube-Diffuser Exit, GasGenerator
1 (B)
3012508 Ê Duct-Diffuser Exit, GasGenerator
1 (B)
3102841-01 Clamp-Tube, Diffuser Exit,Gas Gen
1 955.40
MS9714-05 Bolt-Mach, DR DBL HEX0.190-32J X 0.438
1 41.33
For Engines PT6A-11, PT6A-11AG, PT6A-15AG, PT6A-21, PT6A-25, PT6A-25A, PT6A-25C,PT6A-27, PT6A-28, PT6A-34, PT6A-34AG, PT6A-34B, PT6A-36, PT6A-110, PT6A-112,PT6A-114, PT6A-114A, PT6A-135 and PT6A-135A:
3118756-01 Tube-Diffuser Exit, GasGen, Assy of
3111046-01 1 1220.30 (A)
3102842-01 Ê Tube-Diffuser Exit, GasGenerator
1 (B)
3102690-01 Ê Duct-Diffuser Exit, GasGenerator, Bottom
1 (B)
3102691-01 Ê Duct-Diffuser Exit, GasGenerator, Top
1 (B)
PRATT & WHITNEY CANADA
SPARE PARTS BULLETINPT6A SPB No. 34R1
P&WC Proprietary Information. Subject to the restrictions on the first page.
The export control classification with respect to this document is contained on the first page.Nov 25/1996 PT6A SPB No. 34Revision No. 1: Mar 22/2013 Page 2 of 3
TURBOPROP ENGINEREPAIR PARTS FOR THE GAS GENERATOR DIFFUSER EXIT TUBES - INTRODUCTION OF
![Page 11: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/11.jpg)
7. Material Information (Cont’d)
New P/N Keyword Old P/N Qty
Est. UnitList Price
($US,2013)
InstructionsDisposition
3102841-01 Clamp-Tube, Diffuser Exit,Gas Gen
1 955.40
MS9714-05 Bolt-Mach, DR DBL HEX0.190-32J X 0.438
1 41.33
(A) No more than five (5) gas generator exit tube repairs permissible per gas generator caseassembly.
(B) Non procurable.
PRATT & WHITNEY CANADA
SPARE PARTS BULLETINPT6A SPB No. 34R1
P&WC Proprietary Information. Subject to the restrictions on the first page.
The export control classification with respect to this document is contained on the first page.Nov 25/1996 PT6A SPB No. 34Revision No. 1: Mar 22/2013 Page 3 of 3
TURBOPROP ENGINEREPAIR PARTS FOR THE GAS GENERATOR DIFFUSER EXIT TUBES - INTRODUCTION OF
![Page 12: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/12.jpg)
![Page 13: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/13.jpg)
S.I.L NO GEN-116R1
SERVICE INFORMATION LETTER
Subject Installation of O-Ring in Oil Filter Groove
Applicability JT15D, PT6A, PT6B, PT6D, PT6T, PW100, ST6T
P&WC has recently been informed that, in some cases, operators may experience difficulty when inserting an O-ring in oil filters P/N 3059256-01, 3059257-01, 3059258-01, or 3070975-01 that were procured between September 2010 and October 2011 (Figure 1).
Operators experiencing difficulty should return such oil filters to the entity that sold the part in order to obtain credit consideration.
Sincerely PRATT & WHITNEY CANADA CORP.
Gerry Whitty Deputy Chief Engineer Customer Service
Figure 1 Correct Installation of O-ring in Oil Filter Groove
THIS SERVICE INFORMATION LETTER IS VALID UNTIL SUPERSEDED OR CANCELLED BY REVISION
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data. Issued: 19 Feb 2013 Page 1 of 1
PRATT & WHITNEY CANADA CORP. MARIE-VICTORIN, LONGUEUIL
QUEBEC, CANADA J4G 1A1 PRINTED IN CANADA
![Page 14: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/14.jpg)
![Page 15: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/15.jpg)
Pratt & Whitney GanailaA United Technologies Company
SERVICE INFORMATION LETTERQualified Engine OilAnalysis Laboratory List
All Engine Models
pratt & Whitney Canada Corp. (P&WC) wishes to provide operators and maintainers of P&WC
engines the following list of qualified laboratories for purposes of engine oil sample analyses.
Region : Americas
Aviation Laboratories Inc.Corporate Headquarters5401 Mitchelldale #86HoustonTX77092USA1-800-256-6876TEL: (713) 864-6677FAX: (713) 864-6990WEBSITE: www.avlab.com
Jet-Care International Inc.3 Saddle RoadCedar KnollsNJ 07927-902USATEL:877 JET-CARETEL: (973) 292-9597FAX: (973) 292-3030WEBSITE: www. iet-care.com
This S.l.L is valid until superseded or cancelled by revision
Pratt & WhitneY Ganada CorP.1 000 Marie-Victorin, Longueuil
Qu€bec, Canada J4G 1AlPrinted in Canada
S.I.L NO. GEN-123
Subject :
Applicability :
Analysts, Inc.3385 Martin Farm Road, Suwanee,GA 30024Atlanta, Georgia, USATEL 800-241-6315 | 470-238-4000FFJ\ 470-238-4019WEBSITE: www.analvstsinc.com
Aviation Laboratories Inc.New Orleans International Airport910 Maria StreetKenner. LA 70062USATEL: (504) 469-6751FAX: (504) 469-6886E-mail 1 : [email protected] 2: sqhitterman@avlab. comWEBSITE: www.avlab.com
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data'
lssued: January 21,2013Page ll
![Page 16: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/16.jpg)
PRATT & WHITNEY CANADASERVICE INFORMATION LETTER
PWC: GEN-123
Region : Americas (Gontinued)
Martel Laboratories JDS Inc.Petroleum Laboratory Services1025 Cromwell Bridge RoadBaltimore, MD 21286USATEL: (410) 825-7790FAX: (410) 821-1054E-mail: martel@martellabs. comWEBSITE: www. martellabs.com
Martel Laboratories JDS Inc.Petroleum Laboratory Services1438 E Samgamon Ave.Springfield ,'162702USATEL: (217) 522-0009FAX: (217) 522-2119WEBSITE: www. matelabs.com
Predictive Maintenance Corporation8330 D6carie Boulevard,Montreal, Quebec,CanadaH4P 2P5TOLL FREE 1.800.461.TEST (8378)WEBSITE: www.tribolooik. com
WearCheck Ganada lnc.C8-1175 Appleby LineBurlington, ONL7L 5H9CanadaTEL: +1 (905)569-8600FAX: +1 (905)569-8605E-mail : [email protected]: www.wearcheck. com
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data.
Martel Laboratory Services Inc.Aero Services BuildingCapitalAirportSpring field, lL 62707USATEL: (217) 522-0009Ff,X: (217) 544-2034WEBSITE : ulww. martellabs. com
Metro Tech Systems Ltd.Bay 1125621-11th Street N.E.Calgary, AlbertaT2E7G9, CanadaTEL: (a03) 295-8803FAX: (a03) 295-3848E-mail : info@metrotechsvstems. caWEBSITE : www. metrotechsvstems' ca
SkywatchService of Analysts, Inc.
3075 Cornors North Court NWNorcross, GA 30071USATEL: (770) 448-5235FAX: (404) 448-5918
This S.l.L is valid until superseded or cancelled by revision
Praft & WhitneY Canada CorP.1 000 Marie-Victorin, Longueuil
Qu6bec, Canada J4G 141
Printed in Canadalssued: January 21,2013
Page l2
![Page 17: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/17.jpg)
PRATT & WHITNEY CANADASERVICE INFORMATION LETTER
PWC: GEN-123
Reqion: Australasia
All Nippon Ainrays Co., Ltd.3-6-7 Haneda AirportOta-kuTokyo 144-0041JapanTEL: +81-3-6428-2144FAX: +81-3-6428-2141
Det Norske Veritas Pte. Ltd.10 Science Park DriveDNV Technology CenterSingapore 118224TEL: 65-6779-6363FAX: 65-6779-5239E-mail: asim. [email protected]: www.dnv.com.sg
Qantas NDT SectionQantas Jet BaseQantas EngineeringBuilding M14711Mascot, New South Wales 2020AustraliaTEL: 61 -2-9691 8659FAX: 61-3-96914312WEBSITE: www.qantas.com. au
Xi'an Aero Engine CorP.Physic and ChemicalTesting CentreXujiawan BeijiaoP.O. Box 13-88, Xi'an710021Peoples Republic of ChinaTEL: 86-29-861 52501FAX: 86-29-861 531 45WEBSITE: www.xaec.com
Aviation Safety Institute Technology Lab.(Center of Aviation Safety Technology,General Civil Aviation Administration of China).Building 24 Jia, Xibahe Beili,Chaoyang District, Beijing 100028 P.R.
ChinaTEL: 86-1 0-6447 357 1, 86-1 0-64473559FM: 86-1 0-6447 3569, 86-1 0-6447 3548E-MAIL1 : [email protected] L 2: [email protected]: www. castc.orq. cn/lab
Materials Research LaboratoriesIndustrial Technology Research Institute321 Kuang Fu RoadSection 2., HsinchuTaiwanTEL: (886) 03-573-2677FM: (886) 03-573-2348E-mail: [email protected]: www. mrl.itri.orq.tw
Setsco Services Pte. Ltd.18 Teban Gardens CresentSingapore 608925TEL: 65-6566-7777FAX: 65-6566-7718E-mail: [email protected]: www.setsco.com
Xi'an High-Tech Physical GhemicalCo. Ltd.Testing Center8 Guangde RoadXi'an High Tech Development Zone,710075Peoples Republic of ChinaTEL: 86-29-8845277 6 & 86-29-884531 88
FAX: 86-29-88452779E-mail: [email protected]: www.xaqklh.com
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data.
This S.l.L is valid until superseded or cancelled by revision
Pratt & Whitney Canada CorP.1 000 Marie-Victorin, Longueuil
Qu6bec, Canada J4G 141
Printed in Canadalssued: January 21,2013
Page l3
![Page 18: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/18.jpg)
PRATT & WHITNEY CANADASERVICE I NFORMATION LETTER
PWC: GEN-123
Reqion: Europe
AVIO SpA Laboratory80038 Pomigliano D'ArcoNapoli, ltalyTEL: 39-081-3163215FAX: 39-081-3163463E-mail : renato.festa@avioo rou p. comWEBSITE: www.avio.it
PCAS (Produits Chimiques Auxiliaires etSyntheses)Zone Industrielle de la Vigne aux Loups23 Rue Bosselet91-161 Long-JumeauFranceTEL: 33-1-69-74-81-00FAX: 33-1-69-09-49-74E-mail: alain. [email protected]: www.ocaschem.com
SN Brussels AirlinesBuilding 12-012International AirportBrussels, 1930 ZaventemBelgiumTEL: (32) 2723 4958FM: (32) 2723 5995WEBSITE: http://www.sabena.com
Lufthansa Technik AGWeg Beim JaegerDept.: HAMffQ/MMR123D-22313 HamburgGermanyTEL: (49) 0 4050 702233FAX: (48) 0 40 50701411
QinetiQ Ltd.Fueland LubricantsCody Technology CenterBuilding 442, lvely RoadFarnborough, HamPshire GU14 OLX
EnglandTEL: (aa) 1252397469(24 Hour Mobile Service) (44) 7771 808 541
FAX: (a4) 1252 39 7299E-mail: [email protected]: www.qinetiq.com
Spectro OilAnalYsis ComPanY Ltd.Palace GateHigh StreetOdiham, HamPshire RG29 1NPUnited KingdomTEL: 44-0-1256 704000
AOG: +44 (O) 1256 393500 (24 hours)E-mail: enquires@soectro-oil. comWEBSITE: www.spectro-oil. com
VernolabZone Industrielle des Cents SilloneRue Lavoisier BP 81327130 Verneuil Sr AvreFranceTEL: 33-232606500Fpfi:16-232601646E-mail: alain. [email protected]: www.vernolab.com
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data.
This S.l.L is valid until superseded or cancelled by revision
Pratt & WhitneY Canada CorP.'t 000 Marie-Victorin, Longueuil
Qu6bec, Canada J4G 1A1
Printed in Canadalssued: January 21,2013
Page l4
![Page 19: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/19.jpg)
PRATT & WHITNEY CANADASERVICE INFORMATION LETTER
PWC: GEN-123
Following the issue of this SIL (Service Information Letter), the Oil Analysis Laboratories list will
no longer appear in the P&WC Engine Maintenance Manuals.
P&WC Customer Service Centre24.HOUR GLOBAL SERVICE
E-MAIL: [email protected]: (+Canada) (450) 647-8000
USA & CANADA: 1-800-268-8000INTERNATIONAL: (+lAC*) 8000-268-8000
FAX:WEB SITE:
(+Canada) (450) 647-2888www.pwc.ca
Yours truly,PRATT & WHITNEY CANADA CORP.
Christopher HughesCustomer Engineering
EXPORT CONTROL CLASSIFICATION: This document does not contain technical data.
This S.l.L is valid until superseded or cancelled by revision
Pratt & Whitney Canada GorP.1 000 Marie-Victorin, Longueuil
Qu6bec, Canada J4G 141
Printed in Canadalssued: January 21,2013
Page l5
![Page 20: Conquest SERVICE LETTER - Cessna](https://reader031.fdocuments.net/reader031/viewer/2022012410/616a653311a7b741a35206d4/html5/thumbnails/20.jpg)