Fire Suppression LimitedUnit 11, Eldonwall Trading Estate,St.Phillips, Bristol, BS4 3QQ

Tel: 0845-127-9915 Fax: 0845-127-9959sales@ resuppression.co.uk

Part No. ABS019C-ECPipe colour REDDiameter Tolerance +/- 0.15mm

Installation Instructions:Use the correct solvent Plusbond 3019.Do not paint.Keep pipe clean and free from dust.Do not install in direct sunlight.Only install with approved pipe.DDo not use solvents to clean,only soapy water.

Used when sampling is requiredin a chill or coldstore.The conical head prevents ice or condensation from coveringthe sampling hole.

(ABS019C-EC - 25mm)CONICAL END CAP SAMPLING KIT

©All rights reserved. Fire Suppression Ltd.

ABS011C CONICAL HEADM16 PLASTIC NUT

10mm NYLON TUBINGSTANDARD LENGTH 2m

JOINTING SOCKET withCAPILLARY ADAPTOR

RAW MATERIAL DATA

NFM 10x7.5 -OD Tol’s +0.03/-0.09mmBurst Pressure 995 PSI / 68 barBend Radius 40mmWeight/30m 1.08kgs

NEM 10x8 -ODOD Tol’s +0.02/-0.10mmBurst Pressure 772 PSI / 53 barBend Radius 50mmWeight/30m 0.87kgs

Temperature Range --40°C to +70°C, Occasional use up to+130°C, Brittle point: -70°C

TTechnical information for use asa guide only.

Pressure values given are based onthe short term burst pressure at 20°Cbased on a 3:1 safety factor.Any increase in temperature above20°C will result in a decline in workingppressure values.

Products and specications are subjectto improvements and change withoutnotice.

RAW MATERIAL DATA