JVCKENWOOD Company Profile 2019 JVCKENWOOD Company Profile ...
Company Profile-EPAIPL-Powerpoint Presentation
-
Upload
rainak-podder -
Category
Documents
-
view
133 -
download
1
Transcript of Company Profile-EPAIPL-Powerpoint Presentation
Registered Office
EPA Infrastructure Pvt. LtdB-267, North-Ex Mall Sector-9, Rohini, Delhi-110085
Phone:+91-11-47068152Email ID: [email protected]: www.epa-infrastructure.com
Type of Company: Private Limited
1. Civil, Finishing and Interior Works. 2. Concrete Flooring – Laser Screed, Truss
Screeds & Vacuum Dewatered Flooring 3. Industrial Floorings like
PE foam floorings Epoxy floorings
4. Dust proofing of concrete floors with Impregnation chemicals Epoxy coatings
5. Waterproofing works for Basements, Sunken, Terrace Gardens, Terraces, Walls, Under Raft, Retaining Walls etc using: Polymer modified cementations membranes Polyurethane membranes, Box-type method using Kota/Agra stone Injection Grouting
BUSINESS ACTIVITIES
6. Insulation of buildings with
• Expanded H.D. polystyrene Extruded Polystyrene (XPS) Thermal insulating plaster/ Vermiculite plaster Closed cell-structure PE sheets
7. Core Cutting8. Structure Strengthening9. Consultancy and PMC10. Trading of Construction Chemicals11. Road Work.
Civil, Finishing and Interior Work
Pictures of Work for Audi Workshop at Moti-Nagar, New Delhi
Pictures of Work for Infosys Guest House at A-9/35, Vasant Vihar, New Delhi
VACUUM DEWATERED FLOORING
The Vacuum Dewatered (VD) Flooring method, is a system for laying high quality concrete floors with superior cost-effectiveness. Surplus water from the concrete is removed immediately after placing and vibration, reducing the water-cement ratio to an optimum level.
Through the vacuum treatment, it is possible to reduce the water content in the concrete by 15-25% which greatly increases the compressive strength.
EPOXY FLOORING
Epoxy is an engineering adhesive that bestows the industrial floor with durability, rejuvenates it and amplifies its value. Epoxy Coating can be applied to the existing floors and also the newly paved ones. It gives a fantastic look with increased strength and durability.
WATERPROOFING
It is essential to water proof a structure to prevent the seepage of water for its durability. We provide water proofing solutions for basements, sunken portions, roofs, terrace gardens and expansion joints etc. We deal with several ways of water proofing depending on a structure, site and conditions
INJECTION GROUTING
Cracks, as narrow as 1 mm can be bonded by the injection of epoxy using this technique. The technique generally consists of establishing entry and venting ports at close intervals along the cracks, sealing the cracks on exposed surfaces and injecting the epoxy under pressure. This technique is successfully used in repair of cracks in buildings, bridges, dams and other types of concrete structures.
FOAM CONCRETE
Foam concrete is a cement-bonded material made by blending an extremely fluid cement paste (slurry), into which is injected a stable, pre-formed foam, manufactured on site.Fresh foam concrete has the appearance of a light-grey mousse or milk-shake and it is the volume of slurry to foam which dictates the cast density of the foam concrete.
STRUCTURAL STRENGTHENING
Structural strengthening, restoring and adding capacity is an integral part of today’s concrete repair industry.Structural strengthening may be required for increasing load capacity of beams, columns, walls, and/or slabs, seismic retrofitting, supporting additional live or dead loads not included in original design, to relieve stresses generated by design or construction errors, or to restore original load capacity to damaged structural elements.
ANTI-CORROSIVE COATING
Anti-corrosion refers to the protection of metal surfaces from corroding in high-risk (corrosive) environments. When metallic materials are put into corrosive environments, they tend to have chemical reactions with the air and/or water. The effects of corrosion become evident on the surfaces of these materials. It is necessary to put anti corrosive coatings on the metals being used in the structures these days, especially steel for a longer durability. The metal surface is treated with chemical coats including paints and reagents etc. for the treatment.
About the Promoter
Mr. Paramjit Singh Sahai,B.Tech(Civil), IIT Delhi, 1977.
He has over 3 decades of experience in designing, planning, marketing, execution and project management of civil construction projects/ turnkey chemical process plants/ turnkey waste water treatment plants. He has initiated the formation of an NGO called Sandeep Foundation for community welfare and EPA Home Pvt. Ltd for facilitation of development of mass housing in the country. He is an active member of IIT Delhi Alumni Association and contributes in promoting livelihood. He is also associated with TIE to encourage entrepreneurship.
OUR VISSION
•To be known as a great company to work for•To be known as an organization that walks its talk•To be known as a provider of excellent quality goods and services•To be grown into an institution that lasts generations•To always work in accordance to customer satisfaction