Communication systems v7
Transcript of Communication systems v7
![Page 1: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/1.jpg)
![Page 2: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/2.jpg)
![Page 3: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/3.jpg)
![Page 4: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/4.jpg)
protective coating
glass cladding
optical fiber core
Optical FiberOptical Fiber
An optical fiber is a thin (2 to 125µm), flexible medium capable of guiding an optical ray.
Preferable because of,
• Large bandwidth, light weight, and small diameter
• Nonconductivity (no EMI & RFI)
• Longer distance signal transmission with lesser attenuation
• Security & greater repeater spacing
• Designed for future applications needs
![Page 5: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/5.jpg)
Optical FiberOptical Fiber
The basic question is“how much information is to be sent and how far does it have
to go?”
Five basic categories of application have become important for
optical fiber:
• Long-haul trunks
• Metropolitan trunks
• Rural exchange trunks
• Subscriber loops
• Local area networks
![Page 6: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/6.jpg)
Basic fiber optic communication systemBasic fiber optic communication system
![Page 7: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/7.jpg)
Transmission WindowsTransmission Windows• Optical fiber transmissions uses wavelengths in the near
infrared portion of the spectrum
• Both Lasers and LEDs are used to transmit light through fibers
• Lasers are used for 1310 nm or 1550 nm single mode
transmissions
• LEDs are used for 850- or 1300 nm multimode applications
![Page 8: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/8.jpg)
Fiber Optic Loss CalculationsFiber Optic Loss Calculations
![Page 9: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/9.jpg)
![Page 10: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/10.jpg)
![Page 11: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/11.jpg)
![Page 12: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/12.jpg)
Fiber Optic TypesFiber Optic Types
• Step-index multimode fiberStep-index multimode fiber– the reflective walls of the fiber move the light pulses to
the receiver• Graded-index multimode fiberGraded-index multimode fiber
– acts to refract the light toward the center of the fiber by variations in the density
• Single mode fiberSingle mode fiber– the light is guided down the center of an extremely
narrow core
Three basic types of optical fibers are used in communication systems
![Page 13: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/13.jpg)
Optical Fiber Transmission CharacteristicsOptical Fiber Transmission Characteristics
Optical Fiber Transmission Modes
![Page 14: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/14.jpg)
Optical Fiber Transmission CharacteristicsOptical Fiber Transmission Characteristics
![Page 15: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/15.jpg)
The term “multimode” refers to the fact that multiple modes or paths through the fiber are possible.
•Step-index multimode fiber has an index of refraction profile that “steps” from low to high to low as measured from cladding to core to cladding.
•Relatively large core diameter and numerical aperture characterize this fiber.
•The core/cladding diameter of a typical multimode fiber used for telecommunication is 62.5/125 μm (about the size of a human hair).
•Stepindex multimode fiber is used in applications that require high bandwidth (< 1 GHz) over relatively short distances (< 3 km) such as a local area network or a campus network backbone.
Step-index multimode fiberStep-index multimode fiber
![Page 16: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/16.jpg)
Step-index multimode fiberStep-index multimode fiber
Advantages:
•Relatively easy to work with. • Because of larger core size, light is easily coupled to and from it. • Can be used with both lasers and LEDs as sources. • Coupling losses are less than those of the single-mode fiber.
Drawbacks:
•It suffers from modal dispersion. Hence resulting in bandwidth limitation which translates into lower data rates.
![Page 17: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/17.jpg)
The term “single-mode” fiber refers to the fact that only single path or mode for light to travel through the fiber.
•The number of modes propagating through a multimode step-index fiber is approximated by,
Single-mode Step-index fiberSingle-mode Step-index fiber
![Page 18: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/18.jpg)
Single-mode Step-index fiberSingle-mode Step-index fiber• The core diameter of a typical single-mode fiber is between 5 – 10 μm
with a cladding of 125 μm.
• Single-mode fibers are used in applications which require low signal loss and high data rates (repeater/amplifier spacing must be maximized).
• It does not suffer from modal dispersion. Rather at higher data rates chromatic dispersion can limit the performance. This can be overcome by,
• Transmitting at wavelength (~1300nm) at which glass has constant index of refraction
• Use an optical source that has narrow output spectrum (DFB laser)• Use special dispersion compensating fiber.
Drawback:
• It is relatively difficult to work with because of its small core size.• It is typically used only with laser sources because of the high coupling
losses associated with LEDs.
![Page 19: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/19.jpg)
DispersionDispersion
The pulse spreading in an optical fiber, when expresses in terms of symbol Δt.Reasons for pulse spreading:
• Numerical aperture N.A• Core diameter• Refractive index profile• Wavelength• Laser linewidthCONTROL+W
![Page 20: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/20.jpg)
DispersionDispersion
The total dispersion per unit length is given by,
The overall effect of the dispersion on the performance of fiber optic system is Intersymbol Interference (ISI).
![Page 21: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/21.jpg)
Types of DispersionTypes of DispersionThe dispersion is generally divided into two categories,Modal Dispersion: “Pulse spreading caused by the time delay between lower-order modes and the higher-order modes”. (Modes means Paths…lower ordr path means stright path)
Modal dispersion is problematic in multimode fiber causing bandwidth limitation.
Chromatic Dispersion:“Pulse spreading due to the fact that different wavelengths of light propagate at slightly different velocities through the fiber”.
All light sources, whether laser or LED, have finite linewidths, which means they emit more than one wavelength. Because the index of refraction of glass fiber is a wavelength-dependent quantity, different wavelengths propagate at different velocities. Chromatic dispersion is typically expressed in units of nanoseconds or picoseconds per (km-nm).
![Page 22: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/22.jpg)
Chromatic DispersionChromatic Dispersion
Chromatic dispersion consists of two parts: •Material dispersion •Waveguide dispersion
Material dispersion is due to the wavelength dependency on the index of refraction of glass.
Waveguide dispersion is due to the physical structure of the waveguide.
In a simple step-index profile fiber, waveguide dispersion is not a major factor, but in fibers with more complex index profiles (Graded index), waveguide dispersion can be more significant (graded index maiin dispersion mOre visibble o ge).
![Page 23: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/23.jpg)
DispersionDispersionWhen considering total from different causes, then total dispersionCan be approximated by,
where Δtn represents the dispersion due to the various componentsthat make up the system.
The transmission capacity of fiber is typically expressed in terms of bandwidth × distance. For example, the bandwidth × distance product for a typical 62.5/125-μm (core/cladding diameter) multimode fiber operating at 1310 nm might be expressed as 600 MHz • km. The approximate bandwidth of a fiber can be related to the total dispersion by the following relationship,
![Page 24: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/24.jpg)
DispersionDispersion
![Page 25: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/25.jpg)
Components - Optical Fiber CableComponents - Optical Fiber Cable
![Page 26: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/26.jpg)
Components - Optical Fiber CableComponents - Optical Fiber Cable
![Page 27: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/27.jpg)
Indoor Optical Fiber CableIndoor Optical Fiber Cable
![Page 28: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/28.jpg)
Outdoor Optical Fiber CableOutdoor Optical Fiber Cable
![Page 29: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/29.jpg)
FIBER OPTIC SOURCESFIBER OPTIC SOURCES
Two basic light sources are used for fiber optics: laser diodes (LD) and light-emitting diodes (LED). Each device has its own advantages and disadvantages as listed
Fiber optic sources must operate in the low-loss transmission windows of glass fiber. LEDs are typically used at the 850-nm and 1310-nm transmission wavelengths, whereas lasers areprimarily used at 1310 nm and 1550 nm.
![Page 30: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/30.jpg)
FIBER OPTIC SOURCESFIBER OPTIC SOURCESLEDs are typically used in lower-data-rate, shorter-distance multimode systems because of their inherent bandwidth limitations and lower output power.
They are used in applications in which data rates are in the hundreds of megahertz as opposed to GHz data rates associated with lasers.
Two basic structures for LEDs are used in fiber optic systems: surface-emitting and edge-emitting as shown,
![Page 31: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/31.jpg)
Laser diodes (LD) are used in applications in which longer distances and higher data rates are required.
Advantages:•Because an LD has a much higher output power than an LED, it is capable of transmitting information over longer distances. •Given the fact that the LD has a much narrower spectral width, it can provide high-bandwidth communication over long distances. •The LD’s smaller N.A. also allows it to be more effectively coupled with single-mode fiber.
Drawbacks:•The difficulty with LDs is that they are inherently nonlinear, which makes analog transmission more difficult. •They are also very sensitive to fluctuations in temperature and drive current, which causes their output wavelength to drift.
FIBER OPTIC SOURCESFIBER OPTIC SOURCES
![Page 32: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/32.jpg)
FIBER OPTIC SOURCESFIBER OPTIC SOURCES
![Page 33: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/33.jpg)
Fiber Optic DetectorsFiber Optic Detectors
The purpose of a fiber optic detector is to convert light emanating from the optical fiber back into an electrical signal.
The choice of a fiber optic detector depends on several factorsIncluding,
•Wavelength•Responsivity•Speed or rise time
The most commonly used photodetectors are the PIN and avalanche photodiodes (APD). The material composition of the device determines the wavelength sensitivity.
![Page 34: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/34.jpg)
In general,
•Silicon devices are used for detection in the visible portion of the spectrum;
•InGaAs crystal are used in the near-infrared portion of the spectrum between 1000 nm and 1700 nm,
•Germanium PIN and APDs are used between 800 nm and 1500nm.
Fiber Optic DetectorsFiber Optic Detectors
![Page 35: Communication systems v7](https://reader036.fdocuments.net/reader036/viewer/2022062702/5549c0bdb4c905bc6d8b5308/html5/thumbnails/35.jpg)
Erbium-doped fiber amplifiers (EDFA)Erbium-doped fiber amplifiers (EDFA)The EDFA is an optical amplifier used to boost the signal level in the 1530-nm to 1570-nm region of the spectrum. When it is pumped by an external laser source of either 980 nm or 1480 nm, signal gain can be as high as 30 dB (1000 times).
Because EDFAs allow signals to be regenerated without having to be convertedback to electrical signals, systems are faster and more reliable. When used in conjunction with wavelength-division multiplexing, fiber optic systems can transmit enormous amounts of information over long distances with very high reliability.