PolySoft is a specifically designed product for wet area

surfaces and children’s playgrounds, where comfort and

safety are paramount.

PolySoft’s colour range has been carefully selected to

provide an unlimited choice of striking combinations for pool

surrounds and water play areas. The unique combination of

the soft texture of PolySoft and the natural colour range, gives

designers, architects and all involved, the freedom to create

areas that are aesthetically pleasing and safe underfoot. OutdOOr areas and childrens playgrOunds PolySoft is the ideal surface solution for children’s

playgrounds. It is also suited to public pathways, rooftop areas,

entertainment venues and any application that requires a soft

seamless flexible surface.

When combined with the appropriate cushion underlay,

PolySoft is an exceptional impact attenuating safety surface

meeting all fall height requirements. PolySoft addresses all the

common issues usually associated with traditional surfacing.

These include cracking, fading and surface temperature. wet areas PolySoft is perfectly suited for use around pools, in water

theme parks, rehabilitation hydrotherapy pool entries,

splash pads and any application where a chlorine resistant

surface treatment is required. The heat reduction in surface

temperature makes barefoot travel possible, even in

extreme environments.

PolySoft can be tailored to suit individual project

considerations, such as slip resistance and drainage.

PolySoft also has unique properties that allow it to be

trowelled onto vertical surfaces, making it suitable to line

pool interiors.

Desert tan

nullarbor

alabaster

silky oak

granite

jaDe breeze

ash

morning sky

arctic white

viriDian

crystal blue

liquiD turquoise

miDnight

burnt amber

sunset fire

vermillion

sunrise

purple

pOlysOft cOlOur range

www.pOlysOft.cOm.aupOOl surrOunds • playgrOunds • pathways P

lease

note

that act

ual c

olo

urs

may

vary

fro

m those

pic

ture

d.

PolySoft Warranty Conditions v2012.2 Page 1 of 1

PURCHASE CONDITIONS “The Seller” to be known as PolySoft. Inspection and return 1. All goods are received subject to inspection within a reasonable time after delivery or before delivery at the buyer’s discretion irrespective of date of payment. The buyer must promptly notify the seller of any defects appearing, and hold goods found to be defective for the seller’s instructions for a reasonable period not exceeding 60 days. If the seller’s instructions are not received within that period, the buyer may return the defective goods to the seller. Warranties 2.1 The seller warrants that the goods are:

(a) fit for the purpose for which goods of the same kind are commonly supplied and any other purpose made known to the seller;

(b)of merchantable quality and to be free from defect in material and workmanship; 2.2 The seller is not responsible for defects resulting from the installation or use of the goods. 2.3 THE BUYER ACKNOWLEDGES THAT THE SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS

ORWARRANTIESREGARDING THE GOODS OR ANY OTHER MATTER OTHER THAN THE REPERSENTATIONS AND WARRANTIES SET FORTH IN THESE PURCHASE CONDITIONS.

2.4 This warranty is for a period of: - (a) Five (5) years in respect of PolySoft Landscape, and (b) Three (3) years in respect of PolySoft Aqua over concrete,

In each case from the date of supply and excluding defects caused by installation, use (including wear and tear and damage) and other factors which are not within the control of the seller.

Purchase for re-supply 3.1 The buyer acknowledges that: -

(a) the goods are acquired and the buyer has held itself out to the seller as acquiring them for the purpose of re-supply or for the purpose of using them up or transforming them, in trade or commerce, in the course of a process of production or manufacture or of repairing or treating other goods or fixtures on land.

(b) it has satisfied itself that the goods are suitable for its purposes. 3.2 The buyer is solely responsible for the use to which it puts the goods. Indemnity 4.1 The buyer indemnifies on a continuing basis and on a full indemnity basis the seller from and against any liability, loss,

expense or demand for or arising from any false, misleading, deceptive or misdescriptive representation or statement made by the buyer in respect of the goods to any person.

4.2 The buyer indemnifies the seller on a continuing basis on a full indemnity basis from and against any liability, loss, expense or demand for or arising from any false, misleading, deceptive or misdescriptive representation or statement made by the buyer to the seller for or in respect of the products.

Limitation of Liability 5.1 The seller’s liability for a breach of a condition or warranty under this agreement is expressly limited to any one or more of the

following, at the seller’s option: (a) the replacement of the goods; (b) the repair of the goods; (c) the cost of replacing the goods; (d) the cost of having the goods repaired; 5.2 The seller’s liability to the buyer under the agreement is otherwise expressly limited to any one or more of the following at

the seller’s option: (a) the cost of replacing the goods; (b) the cost of obtaining equivalent goods; or (c) the cost of having the goods repaired;

PolySoft Pty Ltd ABN: 49 152 361 790

2/71 Prince William Drive

Seven Hills NSW 2147 Ph: 1300 308 037

Int’l: +61 2 4322 1453

Fax: +61 2 4325 3541 E: info@polysoft.com.au

W: www.polysoftsurfaces.com

Pool Surrounds ● Playgrounds ● Pathways

PolySoft Pty Ltd ABN: 49 152 361 790

2/71 Prince William Drive Seven Hills NSW 2147

Ph: 1300 308 037 Int’l: +61 2 4322 1453 Fax: +61 2 4325 3541

E: info@polysoft.com.au W: www.polysoftsurfaces.com

W: www.polysoft.com.au

POLYSOFT MAINTENANCE

PolySoft is an easy product to keep in pristine condition using normal floor maintenance

methods. With regular maintenance, your PolySoft investment will retain the inherent

high standards of wear and appearance for many years.

As with all flooring installations good housekeeping is essential. Spillage should be dealt

with as soon as practically possible. When spillage or soiling occurs maintenance can

be a simple remedial clean or if the soiling is extensive and well established a remedial

clean should be carried out. In all cases there are two types of contamination to deal

with.

1) Dry soiling - When a dry spillage occurs maintenance is a simple sweep or vacuum.

2) Wet soiling - When a wet spillage occurs it should first have the bulk of the spillage

removed, wiped or mopped. If the soiling is over a larger area PolySoft can be treated

with a neutral pH detergent then hosed down.

Where the contamination is established or extensive then a remedial clean can be

undertaken. Where this is the case, apply a neutral detergent using a mop and bucket,

agitate well with a soft/medium broom, then hose off.

PolySoft, due to its high bonding strength, can also be pressure washed or machine

cleaned. When machine cleaning smaller areas, a swing polisher/scrubber (without

vacuum), with a medium bristle brush can be used and on larger areas a walk behind

scrubber with similar brush can be used. Once the mechanical agitation is complete,

the area should be hosed off and in the case of a walk behind scrubber, extracted by

the machine.

Pool Surrounds ● Playgrounds ● Pathways

PolySoft Pty Ltd ABN: 49 152 361 790

2/71 Prince William Drive Seven Hills NSW 2147

Ph: 1300 308 037 Int’l: +61 2 4322 1453 Fax: +61 2 4325 3541

E: info@polysoft.com.au W: www.polysoftsurfaces.com

W: www.polysoft.com.au

It is important to use a neutral pH detergent only and to refrain from any aggressive

machinery or chemicals.

N. B. Use of any solvent chemicals is not recommended. All chemicals and methods

should be trialled first in an obscure place on the surface to ensure compatibility.

PolySoft recommends that the manufacturer’s recommendations in regard to all

chemicals and machinery be strictly adhered to.

If there are any questions in regards to maintenance please contact PolySoft on

+612 4322 1453.