Surfacing using Solidw

Norman F. SimmsCAD Mechanical / Electrical Designer

Surface Modeling in SolidWorks

2

Create 3D Sketch to Guide your Surfaces

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

3Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Creating aLofted Surface


Surfaces – Sweep (Profile, Path, and Guide Curve)


Surfaces – Loft (Tangency to Face)


Surfaces – Loft (Tangency to Face – Adjust End Constraints)


Surfaces – Loft (Tangency to Face)


Knit Surfaces

11Norman F. Simms Mechanical / Electrical Designer 215-269-

0390

Pull Point 1

Filled Surface with Constraint Point

12


Filled Surface with Constraint Point for the other Side

13


Planar Surface

Planar Surface

Creating Planar Surfaces


Knit Surface – Combining Surfaces Together


Revolved Surface – (Revolving Line Around an Axis)


Move Copy (Moving Surface down -6.35mm)


Trim Surfaces


Extrude Surface & Move & Copy Surface

Move/Copy Command


Using Move/Copy Command to Copy and Rotate Surface

Select Feature in the Feature Tree and Select Hide

20


Surface Modeling is used in designing all types of complex cures and is used more and more in product design, automotive, aircraft, and a host of other applications.

If you are someone who is trying to understand CAD , I hope this was a help.

If you are someone who needs someone to help them create new designs. I hope you will use the number below and give me a call.

Thank You for Your Time.

Surfacing using Solidw

Engineering

Transcript of Surfacing using Solidw