www.weiler.de

The New WEILER Steps Forward

E40

More Control – Easier to Use

Serv

ice

Conv

entio

nal/S

ervo

Lat

hes

A

utom

ated

Cyc

le L

athe

sRa

dial

Dril

ling

Mac

hine

sCN

C La

thes

W_Br_E40_E.qxd 26.11.2007 12:37 Uhr Seite 3

Clean Cut: Case Closed

W_Br_E40_E.qxd 26.11.2007 12:37 Uhr Seite 5

Open to New Challenges

W_Br_E40_E.qxd 26.11.2007 12:37 Uhr Seite 1

The clear TFT operating screen and additional membranekeyboard with its touch sensitive keys.

The automated cycle control: fast and simple communicationbetween man and machineEven without computer control experience, the smart WEILER controlwill effortlessly guide you through the program. The automated cycleconcept allows you to operate the E40 in the same way as a conven-tional manual lathe. Alternatively, you can completely program theworkpiece contour with the assistance of a geometrical processor upto and including calculation of the points of intersection.For further information, please refer to the WEILER control brochure.

Simple workpieces are machined in the same way as on a conventional lathe, only better.

Complicated workpieces are machined in the same way as on a conventional lathe, only faster.

Complex workpieces are machined in the same way as on a CNC lathe, only easier.

Easier to use – more efficient – even saferThe new WEILER E40 has been specifically designed to be even easier to use than its predecessors. To further increase efficiency, improve the view of the working area and provide the best possible protection for the operator, the housing has been redesigned, and the positioning of the apron andcontrol optimized.

Strong bed and a strong spindleThree factors ensure that the new E40 provides thehighest possible cutting performance:

The new bed concept with a total width of 330 mm (impressive for this class of machine)

The newly conceived heavy-duty headstock with a stronger main spindle and a spindle bore of 66 mm.

The powerful main drive with a rating of 20 kW

Power alone is not enoughThroughout the conception process, emphasis was not only placed on performance data. The new design also improves theergonomics, accessibility, ease of use and attractiveness of themachine. With the machine cover closed, all control elements areoutside of the working area and consequently accessible to theoperator at all times.

The Innovation of a Successful Concept

W_Br_E40_E.qxd 26.11.2007 12:37 Uhr Seite 4

6/6

W_Br_E40_E.qxd 26.11.2007 12:38 Uhr Seite 6

WEILER Werkzeugmaschinen GmbH

Mausdorf 46 • D-91448 Emskirchen

Telephone +49 (0)9101-705-0

Fax +49 (0)9101-705-122

info@weiler.de • service@weiler.de www.weiler.de

Technical Data

Righ

t to

mak

e te

chni

cal m

odifi

catio

ns r

eser

ved

· 05/

06 ·

5.09

15.0

2.09

.00.

02

Serv

ice

Conv

entio

nal/S

ervo

Lat

hes

A

utom

ated

Cyc

le L

athe

sRa

dial

Dril

ling

Mac

hine

sCN

C La

thes

Working area

Distance between centres mm 1,000

Swing over bed mm 435

Swing over cross slide mm 200

Cross slide travel mm 260

Width of bed mm 330

Tool cross section (W x H) mm 25 x 25

Turning spindle

Spindle head to DIN 55027 Size 6

Spindle diameter at front bearing mm 110

Spindle bore mm 66

Main drive

Drive power 60 %/100 % kW 20/17

Total speed range min-1 1 – 3,500

Max. torque at the spindle Nm 450

Thread cutting range

Metric threads mm 0.1 – 2,000

Inch threads turns/inch 112 – 1/64

Modular threads mm 0.05 – 56

DP threads DP 448 – 0.05

Max. amount of thread starts 360

Tailstock

Sleeve diameter mm 65

Sleeve stroke mm 120

Internal taper of sleeve MK 4

Weight kg 2,700

Measurements including operating panel

L x W x H mm 2,650/2,250/1,850

In addition to the E40, WEILER offers a complete range of cycle-controlled lathes for dia-meters between 330 mm and 1,750 mm with turning lengths from 750 mm to 12,000 mm.

W_Br_E40_E.qxd 26.11.2007 12:37 Uhr Seite 2