Antique Display Bridgeport

New 2008205"-X Travel

Vision-Wide VTEC # VF-5026 CNC Double ColumnMachining Center

LIVE ONSITE & WEBCAST AUCTIONLARGE CAPACITY MACHINING:

• CNC BORING MILLS • CNC BRIDGE MILL MACHINING CENTERS •CNC VERTICAL TURNING CENTER • LARGE CAPACITY LATHES

• CNC LATHES • GRINDERS • PLANT SUPPORT • TOOLING • INSPECTIONBy Order of

Plainville Machine Works, Inc.20 High Street, Plainville, Massachusetts

Sale under Management of:

Thomas Industries, Inc.2414 Boston Post Road, Guilford, CT 06437-2310

Phone (203) 458-0709 • Fax (203) 458-0727 email: gavel@thomasauction.com • www.thomasauction.com

New 1993

New 2000

Auction Date: December 13th,

10:30 AM (ET)Inspection: December 11th & 12th, 9 AM to 4 PM

YOUJI # YV-800-A CNC VERTICAL TURNING CENTER

KURAKI # KBT-13-DXA CNC BORING MILL

OKUMA # MCV-20-A-II CNC Double ColumnMachining Center

158"-X TRAVEL

118"- X Travel

New2011

Installed NewJuly 2012

39.5" Hyd. Chuck

All (4) CNC Machines On

Front Cover AvailableFor Sale Immediately

Through PrivateNegotiation!

Contact Auctioneer

Sale Date: December 13th, 10:30 am (et)2

RARE - LATE CNC BRIDGEMILLS – OKUMA & VISION-WIDE VTEC

Vision-Wide VTEC # VF-5026 CNC Double Column Machining Center

New 2008 205"-X Travel

CNC BRIDGE TYPE DOUBLE COLUMN MACHINING CENTERS(New 2008) VISION-WIDE VTEC # VF-5026 CNC DOUBLE COLUMN

MACHINING CENTER W/ Table Size: 81”x 205”, Table Load Cap.Max. 33,000 lb., Travels: X -205”, Y -102”, Z -48”, 45 HP, SpindleTaper CAT-# 50, Spindle (Chilled) (2 step gear driven) Speed 6000RPM Max., (40) ATC, Chilled Ball Screws, Manuel Universal HeadAttachment, Dual Chip Augers, Lift Up Conveyor, Renishaw #OMP-60 Optical Probe Measuring System, Coolant System &FANUC 18iM CNC Control; S/N B-0302

(New 2000) OKUMA # MCV-20-A-II CNC DOUBLE COLUMNMACHINING CENTERW/ Table Size: 59”x 161”, Table LoadCap. Max. 26,400 lb., Travels: X – 157.48”, Y – 78.74”, Z -17.72”, Cross-Rail Travel 45”, Width Between Columns: 80.71”,30 HP, Spindle Taper CAT # 50, Spindle Speed Range 30-6000,(50) ATC, Coolant System & OKUMA OSP-U-100M CNCControl; S/N 1107-2537

OKUMA # MCV-20-A-II CNC Double Column Machining Center

New2000 X-158”

H.D. Box Way Construction50 ATC

Rear View of OKUMA

Close Up of Cross-Rail

Close Up of Cross-Rail

VTEC Universal

Head

AutoToolChanger

FANUCControl

OKUMA OSP-100UM

Control

KITAMURA # BridgeCenter-8 CNC Double Column Machining Center

New1997 X-80”

FANUC Control

(New 1997) KITAMURA # BRIDGECENTER-8 CNC DOUBLE COLUMNMACHINING CENTERW/ Table Size: 35.5” x 98.5”,Table Load Cap.Max. 6,500 lb., Travels: X – 80”, Y – 42”, Z – 28”, Spindle Taper CAT# 50, Speed Range (2-speed) 60-8000 RPM, 25 HP, (30) ATC,Spindle Nose to Table: 9.9” – 37.9”, Full Enclosure, CoolantSystem, Chip Conveyor & FANUC 15M CNC Control; S/N 55111

CNC VERTICAL TURNING CENTER

YOUJI # YV-800-A CNC VERTICAL TURNING CENTER W/39.5” 3-Jaw Hyd. Chuck, (6) Position Turret with Tool-holders, Flood Type Coolant System, Oil Chiller, LiftUp Chip Conveyor & FANUC Oi-TD CNC Control;S/N 1YVX080AX02715 (New 2011 & Installed NewJuly 2012)

VERTICAL TURRET LATHE(New 1979) SHIBAURA # TX-13 “OPEN SIDE” VERTICAL TUR-

RET LATHE W/ 49.2” Table/ 4-Jaw Chuck, 63” Swing,41.3” Max. Turning Height, 3.9”- 31.5” Horizontal Travelof Rail Head, 29.5” Travel of Turret Ram Head, 30 Deg.Swivel of Ram Head, 4.5- 200 RPM Table Speed,Coolant System, Pendant Controls & TRAK DRO; S/N 21

CNC VERTICAL MACHINING CENTERSWASINO # WMC-22 CNC VERTICAL MACHINING CENTERW/ Table Size: 22” x 47”, Travels: X – 40”, Y – 25”, Z –22”, 15HP, (24) ATC, 4000 RPM, CAT # 50 Spindle,Coolant System & FANUC 6M CNC Control; S/N51011

MATSURRA # MC-1500 CNC VERTICAL MACHINING CEN-TERW/ Table Size: 32” x 62”, Travels: X - 60”, Y - 25.5”, Z-25”, 15 HP, 4th- Axis Interface, Coolant System &FANUC 3000C Control

RARE - KURAKI 5” CNC BORING MILL

lIVe ONSIte & WebcaSt aUctION 3

(60) ATC

New2011

New 1993

X-118”

Installed New July 201239.5" Hyd. Chuck

LUCAS # 30-DCP-75 CNC Table TypeHorizontal Boring Mill

New1980

X-108”

FAGOR CNC

Control

CNC TABLE-TYPE HORIZONTAL BORING MILLS

(New 1993) KURAKI #KBT-13-DXA, 5.12” CNC Table-Type Horizontal Boring MillW/ Table Size (Built In Rotary Type): 62.99” x 70.87”, Full B-Axis .001 (Full 4th)Degree Rotary Table, Travels: X- 118.11”, Y- 78.74”, Z- 51.18” (ColumnTravel), W-27.56” (Spindle Travel), CAT # 50 Spindle Taper, (60) AutomaticTool Changer, 5-2,000 R.P.M., 26,400 Lb. Table Weight Capacity, 30 H.P.,Flood Coolant, Lift-Up Chip Conveyor, Chip Auger & FANUC 15M “Five-Axis” CNC Control; S/N 1576

(New 1980) LUCAS # 30-DCP-75 CNC TABLE TYPE HORIZONTAL BORING MILLW/ Table Size: 40” x 110”, Travels X - 108”, Y – 72” (Vertical), Table Out-Riggers, #50 Taper Spindle & FAGOR “3-Axis” CNC Control; S/N 30DC-0301

(New 1981) NOMURA # B-100LP CNC TABLE Type Horizontal Boring Mill W/Travels: X - 60”, Y – 50” Vertical Travel, 15HP, 3.94” Spindle Diameter, 26”Quill Travel, Spindle Speeds (18) 21-1200 RPM, # 50 Taper Spindle, TableOut-Riggers & ANILAM # 1100 Commando CNC Control; S/N 3614

FANUC Control

NOMURA # B-100LP CNCTable Type Horizontal Boring

Mill

SHIBAURA # TX-13 “OPENSIDE” VERTICAL TURRET

LATHE

New1979

5.12" Spindle

63”Swing DRO

New1980

AnilamCNC

Control

KURAKI # KBT-13-DXA CNC BORING MILL

Nakamura-Tome # SLANT-4B-L

New1990

LongBed

LARGE CAP. CNC MACHINING & TURNING CENTERS

INSpectION Date: December 11th & 12th, 9 am tO 4 pm4

View of Column &FANUC Control

View of Column &FANUC Control

OKAMOTO # HMC-3000 CNC HORIZONTALMACHINING CENTER

View of OKAMOTO ColumnFANUC ControlCNC HORIZONTAL MACHINING CENTERS

OKAMOTO # HMC-3000 CNC HORIZONTAL MACHINING CENTERW/ 42’ X118” TABLE, 120” – X Travel, 60” VERTICAL TRAVEL, # CT-45 SPINDLE,(40) ATC, CHIP CONVEYOR, AUTO WAY LUBE, STAINLESS STEEL WAYCOVERS, AND FANUC 6M CNC CONTROLS, S/N HMC 3000-29 ( NEW1982)

CINCINNATI # 10HC-2500 CNC HORIZONTAL MACHINING CENTERW/ 30” x104” Table, Travels: X - 100”, Y - 42”, Z - 36”, (30) ATC, 4000 RPM, #CAT- 50 Spindle, Coolant System & (CNC Engineering Retrofit)FANUC OM CNC Control;

CINCINNATI # 10HC-2500 CNC “4-AXIS” HORIZONTAL MACHINING CENTERW/ 32” x 66” Table with 30” CNC Rotary Table, Travels: X - 100”, Y -42”, Z - 36”, (30) ATC, 4000 RPM, # CAT- 50 Spindle, Coolant System,& (King Re-Build & Retrofit) FANUC 15M CNC Control;

CINCINNATI # 10HC-2500 CNC “4-AXIS” HORIZONTAL MACHINING CENTERW/ 30” x 104” Table, Travels: X - 100”, Y - 42”, Z - 36”, (30) ATC, 4000RPM, # CAT- 50 Spindle, Rotary Table, Coolant System & CincinnatiAcrmatic-900 CNC Control;

CINCINNATI # 10HC-1500 CNC “4-AXIS” HORIZONTAL MACHINING CENTERW/ 30” x 66” Table, Travels: X - 60”, Y - 42”, Z - 36”, (30) ATC, 5000RPM, # CAT- 50 Spindle, Coolant System & Cincinnati Acrmatic-900CNC Control;

MATSUURA # MC-1500 “MOLD-MASTER” 4-AXIS CNC HORIZONTAL MACHIN-ING CENTERW/ Travels: X - 60”, Y - 30”, Z - 30”, (31) ATC, 3000 RPM,Coolant System & FANUC 7M CNC Control; S/N 81082001

CINCINNATI # 10HC-2500 CNC HORIZONTALMACHINING CENTER W/ 30” x 104” Table

Rotary Table, FANUC 15M Control

X-100”

X-100”

FANUC OM Control

X-120”

FANUC Control

CNC TURNING CENTERNAKAMURA-TOME # SLANT-4B-L CNC TURNING CENTERW/12” Hyd. Chuck, # 16C Collet Nose, Swing (Over Covers)30.71”, Swing (Over Saddle) 20.47”, 30 HP, 2500 RPM,3.94” Spindle Bore, 59.05” Center Distance, (10) StationTurret, Coolant System, Chip Conveyor & FANUC 11TCNC Control; S/N C-42502

NOTE: ALL ROTARY TABLES, ANGLE PLATES,TOOLING & FIXTURES SEEN IN PHOTOS

MAY BE SOLD SEPARATELY.

LARGE QUANTITY OF LISTA TOOL CABINETS

cOmplete lOt catalOg aND phOtOS WWW.thOmaSaUctION.cOm 5

LARGE QUANTITY OFANGLE PLATES

LUCAS # 30-DCP-75 CNC Table TypeHorizontal Boring Mill

LARGE QUANTITY OF CAT # 50 CNC TOOLHOLDERS

LARGE QUANTITY OF CAT #50 CNC TOOLHOLDERS

TSUDAKOMA CNC ROTARY TABLESSEVERAL BORING MILL ROTARYTABLES

MACHINE TOOL ACCESSORIESLARGE ASSORTMENT OF ANGLE PLATES, #CAT-50 & # 45CNC TOOLHOLDERS, RIGHT ANGLE HEADS, TSUDAKO-MA CNC ROTARY TABLES, BORING MILL ROTARYTABLES, VISES, ETC.

VERTICAL MILLING MACHINES BRIDGEPORT 2HP SERIES I VERTICAL MILLING MACHINEW/9”x 48” Table, 12” Knee Travel & TRAK DRO; S/N212614

BRIDGEPORT 1.5 HP VERTICAL MILLING MACHINEW/ 9”x 42”Table, 12” Knee Travel, PF, & TRAK DRO; S/N 229816

BRIDGEPORT 1 HP VERTICAL MILLING MACHINEW/ 9”x 42”Table, 12” Knee Travel & TRAK DRO; S/N 162721

BRIDGEPORT 1 HP M-HEAD “ROUND ARM” VERTICAL MILLINGMACHINEW/ 9”x36” Table (Re-Conditioned for Show)

ACER 3 HP VERTICAL MILLING MACHINEW/ 10” x 50” Table,4200 RPM & Proto-Trak MX-2 CNC Control

SURFACE GRINDER ELB 14”X 36” HYD. SURFACE GRINDERW/ Magnetic Chuck

CINCINNATI # 10HC-1500 CNC “4-Axis”HORIZONTAL MACHINING CENTER

LARGE QUANTITY OF LISTA TOOL CABINETS

Approx.30

1 of 4

LARGE QUANTITY of TOOLING

Many Tool Carts Available

Many Boring & Rt. Angle Heads

Air-Lift Type

BLANCHARD # 22K-42 ROTARY TYPE VERTICAL SURFACE GRINDER

Built-InConveyor

ROTARY VERTICAL TYPE SURFACE GRINDERBLANCHARD # 22K-42 ROTARY TYPE VERTICAL SUR-FACE GRINDERW/ 42” Magnetic Chuck, 22”Segmented Grinding Wheel, 48” Max. SwingInside Guard, 24” Vertical Travel, Max. Table Load3000 lb, 50HP, Wheel Head Speed 720 RPM,Chuck Speeds (6) 6,9,12,18,25 & 33 RPM, FeedRate .004 -.080 ipm, Coolant In Base andAutomatic Sludge Conveyor; S/N 11994

lOt catalOg, phOtOS & bIDDINg - WWW.thOmaSaUctION.cOm6

LATE MODEL TOOLROOM & GRINDING MACHINES

CINCINNATI-MILACRON # 650-20 HEAVY DUTY“BED TYPE HORIZONTAL MILLING MACHINE

MATSUURA # MC-1500 “Mold-Master” 4-AxisCNC HORIZONTAL MACHINING CENTER

WASINO # WMC-22 CNC VERTICALMACHINING CENTER

LargeCapacity

DRO

4th-AxisWired

X-60”

FANUCControl

MATSUURA # MC-1500 CNC VERTICALMACHINING CENTER

LEBLOND REGAL # SERVO-SHIFT ENGINELATHE W/ 30”x 240” Cap

MORI-SEIKI # MS-1250 ENGINE LATHE W/17”x 50” Cap

CLAUSING-COLCHESTER ENGINE LATHE W/15” x 50” Cap

ENGINE LATHES LEBLOND REGAL # SERVO-SHIFT ENGINE LATHEW/ 30”x 240” Cap., 2” Spindle Hole, 18-720RPM, (3) Steady-Rests, 3 & 4 Jaw Chucks, Power Rapid, Coolant and TRAK DRO

MORI-SEIKI # MS-1250 ENGINE LATHEW/ 17”x 50” Cap., 2” Spindle Hole, 1800 RPM, 5HP, 3Jaw Chuck, Coolant System, Inch/Metric Threading & Trav-A-Dial; S/N 7387

CLAUSING-COLCHESTER ENGINE LATHEW/ 15” x 50” Cap., 1.250” Spindle Hole, 3-JawChuck, 2000 RPM, Coolant System & Trav-A-Dial; S/N LTR50SGV/36713

HORIZONTAL MILLING MACHINES CINCINNATI-MILACRON # 650-20 HEAVY DUTY “BED TYPE” HORIZONTAL MILLING MACHINEW/20” x 105” Table, 60”- X Travel, 18” Cross Travel, 24” Vertical Travel, # 50 TaperSpindle, Spindle Speeds (24) 14-1400 RPM, Dual Over Arm Supports, Motorized Over-Arm, Universal Vertical Head, Coolant & Mitutoyo DRO; S/N 3J6P6F-1

CINCINNATI # CIMEX “DUAL SPINDLE” HORIZONTAL MILLING MACHINEW/ Twin Type TableDesign, 16”x 16” Table & 20” Rotary Table, # 50 Taper Spindle, 70-2240 RPM, Coolant& TRAK DRO; S/N 1K1HR-18

MARVEL # 81A-II-PC VERTICAL TILT FRAME BANDSAW

New1995

PLCControl

4th-AxisWired

X-60”

LateModel DRO

LargeCapacity

VERTICAL BAND SAWS (New 1995) MARVEL # 81A-II-PC VERTICAL TILT FRAME BANDSAWW/ Capacity - nominal18” x 20”, blade at 45 deg (left) 18” x 11 1/2”, blade at 45 deg (right) 18” x 13 1/2”,Table working surface 30” x 27”, Table height 38”, Vise opening maximum 21 1/2”,Blade speeds infinitely variable 60 – 400 fpm, Blade length and width 14’ 6” x 1 1/4”,Feed pressure, infinitely variable 0 - 300 lbs., Shuttle feed stroke 0 - 24”, Motor main10 HP, Coolant System, In feed - Out feed Tables & PLC Controls; S/N E-502011-PC

DO-ALL # ML 16” CAPACITY & BLADE WELDER-GRINDER; S/N 5317680

AIR COMPRESSORS & DRYER(New 2006) GARDNER DENVER # VS-30 ROTARY SCREW AIR COMPRESSOR, 30 HP; QUINCY # QMB-30ACA ROTARY SCREW AIR COMPRESSOR, 30 HP; S/N 83259(New 2006) AIRTEK # CT-250 AIR DRYER; S/N 10J-D010224GARDNER DENVER # CTS-Eliminator II Oil & Water Separator(2) AIR RECIEVER STORAGE TANKS (400 Gal. New 2006 & 200 Gal. New 1996)

SALE DATE: DECEMBER 13TH, 10:30 AM (ET)

INSpectION Date: December 11th & 12th, 9 am tO 4 pm 7

HABERLE 14” # H-350-B“COLD SAW”

SEVER-ALL #22-A ABRASIVE CUT-OFF SAW

New1995

DO-ALL # ML 16” W/ BladeWelder-Grinder

OLIVER-ADRIAN # 600 DRILLGRINDER

DAKE # 150-H H-FRAMESHOP PRESS

WILTON 6”/ 12” Vertical/Horizontal Belt/Disc Sander

BRIDGEPORT 2HP Series IVERTICAL MILLING

MACHINE

TAPPING ARMS(2) FLEX-ARM TAPPING ARMSW/ METALWORK TABLES; S/N 010734 & 019115

CIRCULAR CHOP SAWSSEVER-ALL #22-A ABRASIVE CUT-OFF SAWW/20” Wheel, 10HP; S/N 22-A-90

(New 1995) HABERLE 14”, # H-350-B “COLDSAW”W/ Dual Pneumatic Vises & RollerConveyors; S/N 17183B5

H-FRAME HYDRAULIC PRESSESDAKE # 150-H,150 Ton Cap.; S/N 183327DAKE # 50-H, 50 Ton Cap.; S/N 159883OTC, 30 Ton Cap.K.R. WILSON 100 Ton Cap, S/N 160

ARBOR PRESS GREENARD # 5 Floor Type Heavy DutyArbor Press

ATLAS # 2 Bench Type Arbor Press

VERTICAL BELT GRINDERS-SANDERSWILTON 6”/ 12” Vertical/Horizontal Belt/DiscSander

DOUBLE END TOOL GRINDER(2) BALDOR 6” D.E. Grinders10” HEAVY DUTY PEDSTAL TYPE D.E. GRINDER

WELDERS MILLER SYNCROWAVE # 350LX(3) MILLER # DELTA-WELD 451 W/ Wire FeedMILLER # DELTA-FABW/ Wire FeedMILLER # PULSTAR-450W/ Wire Feed(2) L-TEC # VI-252 W/ Wire FeedL-TEC # VCC-305HOBART # Mega-Mig-650WESTINGHOUSE # LIFE-Guard

WELDING “ACORN TYPE” TABLES(4) ACORN & WELD-SALE 5’x 10’ WeldingPlaten Tables W/ Stands

LARGE SELECTION OF FIXURINGATTACHMENTS FOR ACORN TABLES(2) WORTHINGTON # 5-H, Welding Positioners500 lb Cap.,Tilting Type W/ Chuck

(3) PHOENIX DRY ROD OVENS, Type 300LARGE NUMBER OF H.D. WELDING & ASSEM-

BLY TABLESGULLCO # BCM-12 “PORTABLE” PLATEBEVELER, S/N 81067

FORKLIFT NISSAN, 4500 lb.Cap. FORKLIFT W/ TripleMast, Side-Shifter, Solid Tires, Propane;S/N D23749

MITSUBISHI # FCG-20, 4000 lb.Cap., W/Dual Mast, Side-Shifter, Solid Tires,Propane; S/N F82-00106

(2) SETS FORK Extensions

ACER 3 HP VERTICAL MILLINGMACHINE W/Proto-Trak MX-2

CNC Control

DEVLIEG TOOLSETTER W/DRO

VIEW OF INSPECTION & GRANITE PLATE

FARO #EDGE144"CNCPortableCMMARM

GARDNER DENVER # VS-30 ROTARY SCREW AIR

COMPRESSOR

AIR RECEIVER STORAGETANK

150 TonCapacity

1 of 2

1 of 4 30HP

LateModel

New2012

New2006

New2006

PORTABLE CNC CMM ARM(New 2012) FARO TECHNOLOGIES # EDGE,7-AXIS CNC PORTABLE CMM ARM W/ 144”Reach Range, Vacuum Mount, MagneticMount, BASIC POS CAM-2 Q Upgrade, FullVersion CAM-2-Q Measurement Software,Wi-Fi Capable, Note-Book Computer, HardRoller Wheel Travel Case & Cover; S/N E12-05-12-09825

AIRTEK # CT-250 AIR DRYER

New2006

LARGE QUANTITY AVAILABLE$70KNew

FLEX-ARM TAPPING ARM W/TABLE

SAFETY CLEAN #710-3 MINIMIZERSOLVENT RECYCLER

Like New

FLAMMABLE STORAGE CABINETS

SeveralAvailable

LARGE QUANTITY OF JIB CRANES & HOISTS

cOmplete aUctION INFOrmatION - WWW.thOmaSaUctION.cOm8

QUINCY # QMB-30ACA ROTARY SCREW AIRCOMPRESSOR

ACORN & WELD-SALE 5’x 10’ WeldingPlaten Tables W/ Stands

MILLER SYNCROWAVE # 350LX

MILLER # DELTA-FAB W/ WireFeed

WORTHINGTON # 5-H, 500 lbCap., Tilting Type W/ Chuck

BINKS MODULAR PAINT BOOTH W/ 24’x 15’x 10’H Cap

NISSAN, 4500 lb.Cap. FORKLIFT

TWIN CITY MODULAR 1 Ton CRANE SYSTEM

(28) MODULAR 12’-16’ “BOLT ON TYPE” JIBSW/ Hoists

CRANE SYSTEM & JIBSTWIN CITY MODULAR 1TON CRANE

SYSTEMW/ (2) 24’ WideBridges with 1-ton ElectricHoists & Appox.120’of Railwith Electric Contact Rail.

(28) MODULAR 12’-16’ “BOLT ONTYPE” JIBSW/ ½-1Ton ElectricHoists

PLANT SUPPORTMACHINE TOOL ACCESSORIES & PLANT SUPPORT

LARGE ASSORTMENT OF ANGLE PLATES, RIGHT ANGLE HEADS, TSUDAKOMA CNC ROTARY TABLES,BORING MILL ROTARY TABLES, APPROXIMATELY (700) ASSORTED CAT # 50 & # 45 CNC TOOLHOLDERS,(25) KURT VISES, CARBIDE INDEXABLE TOOLING & BORING BARS, COLLETS, LARGEQUANITY OF INSPECTION TOOLING & EQUIPMENT, CARBIDE INSERTS, CARBIDE ENDMILLS, CHICKMULTI-LOK UNITS, HAND TOOLS, ELECTRICAL TOOLS, AIR TOOLS, PARALLELS, PERISHABLE TOOL-ING, BENCH SANDING MACHINES, WORK BENCHES, LISTA & VIDMAR TOOL CABINETS, SHOP FANS,TABLES, SHELVING, LATHE TOOLING, COLLETS, BENCH GRINDERS, VISES, KURT MACHINING VISES,BATTERY CHARGING, Uni-Tek # 300-SG Tap Disintegrator, FIRE EXTINGUISHERS, STOCK RACKS,PALLET RACKS, PALLET TRUCKS, HORIZONTAL BAND SAWS, PLASTIC 4-WHEEL CARTS, METAL 4-WHEEL CARTS, FOLDING TABLES, PART BINS, 2-DOOR SUPPLY CABINETS, BARREL CARTS, DOLLIES,STEP LADDERS, PORTABLE STEPS, SMOG HOG AIR CLEANING UNIT, OFFICE FURNITURE TOINCLUDE: DESKS, LATERAL FILE CABINETS, BOOKCASES, FILE CABINETS & Much More.

1 of 4

1 of 21 of 4

30HP

VeryLate

VIEW OF H.D. ASSEMBLY & WELDING TABLES

Many SizesAvailable

1 of 2

1 of 2

PAINT BOOTHS & EQUIPMENTBINKS MODULAR PAINT BOOTHW/ 24’x 15’x 10’HCap.& DUAL Front Doors and Exhaust system

BINKS OPEN FRONT PAINT BOOTHW/ 16’x 6’x 8’HCap.& Exhaust System

BINKS OPEN FRONT PAINT BOOTHW/ 6’x 6’x 6’HCap. & Exhaust System

SAFETY CLEAN #710-3 MINIMIZER SOLVENT RECY-CLER; S/N 701300

HARBIL PAINT SHAKERLARGE QUANTITY OF PAINT RACKS & FLAMMA-BLE STORAGE CABINETS

Auction Information

SALE UNDER MANAGEMENT OF THOMAS INDUSTRIES APPRAISAL DIVISIONAccurate appraisals supported by over 56 years of

conducting worldwide auctions and liquidations.

Call (203) 458-0709 for a confidential appraisal of your assets. One piece

of equipment or an entire plant.THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 Phone(203) 458-0727 Faxwww.thomasauction.com

AUCTION INFORMATION: SEE BELOW OR WWW.THOMASAUCTION.COM

lOt catalOg, phOtOS & bIDDINg - WWW.thOmaSaUctION.cOm 9

By Order of

Plainville Machine Works, Inc20 High Street, Plainville, Massachusetts

Sale Date: December 13th, 10:30 AM (ET)

Inspection Date: December 11th & 12th, 9 AM to 4 PM

Buyer's Premium:15% Onsite & 18% Webcast

Webcast Bidding

Register at www.bidspotter.com

Onsite RegistrationOnsite registration is on the morningof the sale. In order to obtain abid paddle a $100.00 refundablefee is due at time of registration.

Proxy BidsIf you are unable to participate in thissale Proxy Bids are accepted.Proxy bids may be submitted onlinedirectly from the lot catalog or call(203) 458-0709 for a proxy bid form.

Disclaimer: Auctioneer is not respon-sible for errors, omissions, additionsor deletions. Items offered may notnecessarily be sold as describedand/or photographed. Buyersshould verify all aspects of theirpotential purchases during inspec-tion as all items offered will be sold“as is, where is” with all faults.Please check with the auctioneer’soffice for additions or deletions.

TECHNICAL INFORMATION Tom DeCosmo (413) 478-0030

PAYMENT INFORMATION Irina Lekhmus (203) 458-0709 X108

ONSITE INFORMATION Jon Standish (203) 915-3430

LARGE CAPACITY PARTS DEGREASER MINUTEMAN FLOOR SWEEPER / WASHER VIEW OF H.D. RACK SHELVING

LARGE QUANTITY OF RAW MATERIAL & RACKS TILTING DUMP SCRAP HOPPER

LateModel

SeveralAvailable

FARO # EDGE 144" CNC ProtableCMM ARM

New2012

FORWARDING SERVICE REQUESTED

PRESORTED FIRSTCLASS MAIL

U.S. POSTAGE

PAIDPermit No. 80

Milford, CT

LIVE ONSITE & WEBCAST AUCTIONLARGE CAPACITY MACHINING

THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

LIVE ONSITE & WEBCAST AUCTIONBy Order of

Plainville Machine Works, Inc.20 High Street

Plainville, Massachusetts

Auction Date: December 13th, 10:30 AM (ET)

Inspection: December 11th & 12th, 9 AM to 4 PM

Buyer's Premium: 15% Onsite & 18% Webcast

aUctION INFOrmatION: WWW.thOmaSaUctION.cOm Or 203-458-0709

NOMURA # B-100LP CNC Table TypeHorizontal Boring Mill

LEBLOND 30"x 240" ENGINE LATHE FREIGHTLINER BOX TRUCK

LateLargeCap.

Manual& CNCControl.

144” Cap.

New2004

By Order of

Plainville Machine Works, Inc.

Auction Date: December 13th, 10:30 AM (ET)

Inspection: December 11th & 12th, 9 AM to 4 PM