CIRCUIT EN 61008-1 EN 61008-2-1 CIRCUIT · CIRCUIT. Protection 32. CIRCUIT. PROTECTION. Ctec....
2
CIRCUIT Protection 32 CIRCUIT PROTECTION Ctec Residual Current Circuit Breaker Ctec Ordering Scheme Ctec Poles 2, 4 2 Rated Current 2 pole : 25, 40, 63, 80, 100A 4 pole : 25, 40, 63A Residual Current Sensitivity 010 = 10mA 030 = 30mA 100 = 100mA 300 = 300mA 500 = 500mA 030 63 Ctec RCCB Technical Specificaon The Ctec range provides stylish and cost effective residual current (earth leak) fault protection in both 2 and 4 poles. Note the Ctec RCCB device does not provide overload or short circuit protection and should be used in conjunction with a miniature circuit breaker (Gtec or Jtec). EN 61008-1 EN 61008-2-1 Up to 100A Number of poles 2 or 4 Rated Voltage (Un) 110, 230, 400 V Frequency 50 / 60Hz Max. Operating Voltage Vn + 10% Residual Current Sensitivity 10, 30, 100, 300, 500 mA Current Rating 2 pole: 25, 40, 63, 80, 100A 4 pole: 25, 40, 63A Ambient Temperature -5°C to +40°C Electrical Life 6000 Switching Operations
Transcript of CIRCUIT EN 61008-1 EN 61008-2-1 CIRCUIT · CIRCUIT. Protection 32. CIRCUIT. PROTECTION. Ctec....
CIRC
UIT
Pro
tect
ion
32
CIRCUIT PROTECTION
Ctec Residual Current Circuit Breaker
Ctec Ordering Scheme
Ctec
Poles2, 4
2
RatedCurrent
2 pole : 25, 40, 63, 80, 100A 4 pole : 25, 40, 63A
Residual CurrentSensitivity
010 = 10mA030 = 30mA
100 = 100mA300 = 300mA500 = 500mA
03063
Ctec RCCB Technical Specification
The Ctec range provides stylish and cost effective residual current (earth leak) fault protection in both 2 and 4 poles.
Note the Ctec RCCB device does not provide overload or short circuit protection and should be used in conjunction with a miniature circuit breaker (Gtec or Jtec).
EN 61008-1EN 61008-2-1
Up to 100A
Number of poles 2 or 4
Rated Voltage (Un) 110, 230, 400 V
Frequency 50 / 60Hz
Max. Operating Voltage Vn + 10%
Residual Current Sensitivity 10, 30, 100, 300, 500 mA
Current Rating 2 pole: 25, 40, 63, 80, 100A 4 pole: 25, 40, 63A
Ambient Temperature -5°C to +40°C
Electrical Life 6000 Switching Operations
CTEC RCCBs
33
CIRCUIT PROTECTION
Ctec Residual Current Circuit Breaker
Ctec Ordering Scheme
Ctec
Poles2, 4
2
RatedCurrent
2 pole : 125A4 pole : 100, 125A
Residual CurrentSensitivity
010 = 10mA030 = 30mA
100 = 100mA300 = 300mA500 = 500mA
030100
Ctec RCCB Technical Specification
The Ctec High current versions provide residual current protection for circuits with loads upto 125A.
Note the Ctec RCCB device does not provide overload or short circuit protection and should be used in conjunction with a miniature circuit breaker (Gtec or Jtec).
100A - 125A
Number of poles 2 or 4
Rated Voltage (Un) 110, 230, 400 V
Frequency 50 / 60Hz
Max. Operating Voltage Vn + 10%
Residual Current Sensitivity 10, 30, 100, 300, 500 mA
Current Rating 2 pole: 125A 4 pole: 100, 125A
Ambient Temperature -5°C to +40°C
Electrical Life 6000 Switching Operations
